renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 00:34:10 +08:00
Code

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse Source
This commit is contained in:
David S. Miller 2017-05-22 23:32:48 -04:00
commit 218b6a5b23
294 changed files with 2909 additions and 1341 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/acpi/acpi-lid.txt
View File

@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
If the userspace hasn't been prepared to ignore the unreliable "opened"
events and the unreliable initial state notification, Linux users can use
the following kernel parameters to handle the possible issues:
A. button.lid_init_state=open:
A. button.lid_init_state=method:
When this option is specified, the ACPI button driver reports the
initial lid state using the returning value of the _LID control method
and whether the "opened"/"closed" events are paired fully relies on the
firmware implementation.
This option can be used to fix some platforms where the returning value
of the _LID control method is reliable but the initial lid state
notification is missing.
This option is the default behavior during the period the userspace
isn't ready to handle the buggy AML tables.
B. button.lid_init_state=open:
When this option is specified, the ACPI button driver always reports the
initial lid state as "opened" and whether the "opened"/"closed" events
are paired fully relies on the firmware implementation.
This may fix some platforms where the returning value of the _LID
control method is not reliable and the initial lid state notification is
missing.
This option is the default behavior during the period the userspace
isn't ready to handle the buggy AML tables.
If the userspace has been prepared to ignore the unreliable "opened" events
and the unreliable initial state notification, Linux users should always
use the following kernel parameter:
B. button.lid_init_state=ignore:
C. button.lid_init_state=ignore:
When this option is specified, the ACPI button driver never reports the
initial lid state and there is a compensation mechanism implemented to
ensure that the reliable "closed" notifications can always be delievered

19
Documentation/admin-guide/pm/cpufreq.rst
View File

@ -1,4 +1,5 @@
.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
.. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
=======================
CPU Performance Scaling
@ -75,7 +76,7 @@ feedback registers, as that information is typically specific to the hardware
interface it comes from and may not be easily represented in an abstract,
platform-independent way. For this reason, ``CPUFreq`` allows scaling drivers
to bypass the governor layer and implement their own performance scaling
algorithms. That is done by the ``intel_pstate`` scaling driver.
algorithms. That is done by the |intel_pstate| scaling driver.
``CPUFreq`` Policy Objects
@ -174,13 +175,13 @@ necessary to restart the scaling governor so that it can take the new online CPU
into account. That is achieved by invoking the governor's ``->stop`` and
``->start()`` callbacks, in this order, for the entire policy.
As mentioned before, the ``intel_pstate`` scaling driver bypasses the scaling
As mentioned before, the |intel_pstate| scaling driver bypasses the scaling
governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
Consequently, if ``intel_pstate`` is used, scaling governors are not attached to
Consequently, if |intel_pstate| is used, scaling governors are not attached to
new policy objects. Instead, the driver's ``->setpolicy()`` callback is invoked
to register per-CPU utilization update callbacks for each policy. These
callbacks are invoked by the CPU scheduler in the same way as for scaling
governors, but in the ``intel_pstate`` case they both determine the P-state to
governors, but in the |intel_pstate| case they both determine the P-state to
use and change the hardware configuration accordingly in one go from scheduler
context.
@ -257,7 +258,7 @@ are the following:
``scaling_available_governors``
List of ``CPUFreq`` scaling governors present in the kernel that can
be attached to this policy or (if the ``intel_pstate`` scaling driver is
be attached to this policy or (if the |intel_pstate| scaling driver is
in use) list of scaling algorithms provided by the driver that can be
applied to this policy.
@ -274,7 +275,7 @@ are the following:
the CPU is actually running at (due to hardware design and other
limitations).
Some scaling drivers (e.g. ``intel_pstate``) attempt to provide
Some scaling drivers (e.g. |intel_pstate|) attempt to provide
information more precisely reflecting the current CPU frequency through
this attribute, but that still may not be the exact current CPU
frequency as seen by the hardware at the moment.
@ -284,13 +285,13 @@ are the following:
``scaling_governor``
The scaling governor currently attached to this policy or (if the
``intel_pstate`` scaling driver is in use) the scaling algorithm
|intel_pstate| scaling driver is in use) the scaling algorithm
provided by the driver that is currently applied to this policy.
This attribute is read-write and writing to it will cause a new scaling
governor to be attached to this policy or a new scaling algorithm
provided by the scaling driver to be applied to it (in the
``intel_pstate`` case), as indicated by the string written to this
|intel_pstate| case), as indicated by the string written to this
attribute (which must be one of the names listed by the
``scaling_available_governors`` attribute described above).
@ -619,7 +620,7 @@ This file is located under :file:`/sys/devices/system/cpu/cpufreq/` and controls
the "boost" setting for the whole system. It is not present if the underlying
scaling driver does not support the frequency boost mechanism (or supports it,
but provides a driver-specific interface for controlling it, like
``intel_pstate``).
|intel_pstate|).
If the value in this file is 1, the frequency boost mechanism is enabled. This
means that either the hardware can be put into states in which it is able to

1
Documentation/admin-guide/pm/index.rst
View File

@ -6,6 +6,7 @@ Power Management
:maxdepth: 2
cpufreq
intel_pstate
.. only:: subproject and html

755
Documentation/admin-guide/pm/intel_pstate.rst Normal file
View File

@ -0,0 +1,755 @@
===============================================
``intel_pstate`` CPU Performance Scaling Driver
===============================================
::
Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
General Information
===================
``intel_pstate`` is a part of the
:doc:`CPU performance scaling subsystem <cpufreq>` in the Linux kernel
(``CPUFreq``). It is a scaling driver for the Sandy Bridge and later
generations of Intel processors. Note, however, that some of those processors
may not be supported. [To understand ``intel_pstate`` it is necessary to know
how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
you have not done that yet.]
For the processors supported by ``intel_pstate``, the P-state concept is broader
than just an operating frequency or an operating performance point (see the
`LinuxCon Europe 2015 presentation by Kristen Accardi <LCEU2015_>`_ for more
information about that). For this reason, the representation of P-states used
by ``intel_pstate`` internally follows the hardware specification (for details
refer to `Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3: System Programming Guide <SDM_>`_). However, the ``CPUFreq`` core
uses frequencies for identifying operating performance points of CPUs and
frequencies are involved in the user space interface exposed by it, so
``intel_pstate`` maps its internal representation of P-states to frequencies too
(fortunately, that mapping is unambiguous). At the same time, it would not be
practical for ``intel_pstate`` to supply the ``CPUFreq`` core with a table of
available frequencies due to the possible size of it, so the driver does not do
that. Some functionality of the core is limited by that.
Since the hardware P-state selection interface used by ``intel_pstate`` is
available at the logical CPU level, the driver always works with individual
CPUs. Consequently, if ``intel_pstate`` is in use, every ``CPUFreq`` policy
object corresponds to one logical CPU and ``CPUFreq`` policies are effectively
equivalent to CPUs. In particular, this means that they become "inactive" every
time the corresponding CPU is taken offline and need to be re-initialized when
it goes back online.
``intel_pstate`` is not modular, so it cannot be unloaded, which means that the
only way to pass early-configuration-time parameters to it is via the kernel
command line. However, its configuration can be adjusted via ``sysfs`` to a
great extent. In some configurations it even is possible to unregister it via
``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and
registered (see `below <status_attr_>`_).
Operation Modes
===============
``intel_pstate`` can operate in three different modes: in the active mode with
or without hardware-managed P-states support and in the passive mode. Which of
them will be in effect depends on what kernel command line options are used and
on the capabilities of the processor.
Active Mode
-----------
This is the default operation mode of ``intel_pstate``. If it works in this
mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
policies contains the string "intel_pstate".
In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
provides its own scaling algorithms for P-state selection. Those algorithms
can be applied to ``CPUFreq`` policies in the same way as generic scaling
governors (that is, through the ``scaling_governor`` policy attribute in
``sysfs``). [Note that different P-state selection algorithms may be chosen for
different policies, but that is not recommended.]
They are not generic scaling governors, but their names are the same as the
names of some of those governors. Moreover, confusingly enough, they generally
do not work in the same way as the generic governors they share the names with.
For example, the ``powersave`` P-state selection algorithm provided by
``intel_pstate`` is not a counterpart of the generic ``powersave`` governor
(roughly, it corresponds to the ``schedutil`` and ``ondemand`` governors).
There are two P-state selection algorithms provided by ``intel_pstate`` in the
active mode: ``powersave`` and ``performance``. The way they both operate
depends on whether or not the hardware-managed P-states (HWP) feature has been
enabled in the processor and possibly on the processor model.
Which of the P-state selection algorithms is used by default depends on the
:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option.
Namely, if that option is set, the ``performance`` algorithm will be used by
default, and the other one will be used by default if it is not set.
Active Mode With HWP
~~~~~~~~~~~~~~~~~~~~
If the processor supports the HWP feature, it will be enabled during the
processor initialization and cannot be disabled after that. It is possible
to avoid enabling it by passing the ``intel_pstate=no_hwp`` argument to the
kernel in the command line.
If the HWP feature has been enabled, ``intel_pstate`` relies on the processor to
select P-states by itself, but still it can give hints to the processor's
internal P-state selection logic. What those hints are depends on which P-state
selection algorithm has been applied to the given policy (or to the CPU it
corresponds to).
Even though the P-state selection is carried out by the processor automatically,
``intel_pstate`` registers utilization update callbacks with the CPU scheduler
in this mode. However, they are not used for running a P-state selection
algorithm, but for periodic updates of the current CPU frequency information to
be made available from the ``scaling_cur_freq`` policy attribute in ``sysfs``.
HWP + ``performance``
.....................
In this configuration ``intel_pstate`` will write 0 to the processor's
Energy-Performance Preference (EPP) knob (if supported) or its
Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
internal P-state selection logic is expected to focus entirely on performance.
This will override the EPP/EPB setting coming from the ``sysfs`` interface
(see `Energy vs Performance Hints`_ below).
Also, in this configuration the range of P-states available to the processor's
internal P-state selection logic is always restricted to the upper boundary
(that is, the maximum P-state that the driver is allowed to use).
HWP + ``powersave``
...................
In this configuration ``intel_pstate`` will set the processor's
Energy-Performance Preference (EPP) knob (if supported) or its
Energy-Performance Bias (EPB) knob (otherwise) to whatever value it was
previously set to via ``sysfs`` (or whatever default value it was
set to by the platform firmware). This usually causes the processor's
internal P-state selection logic to be less performance-focused.
Active Mode Without HWP
~~~~~~~~~~~~~~~~~~~~~~~
This is the default operation mode for processors that do not support the HWP
feature. It also is used by default with the ``intel_pstate=no_hwp`` argument
in the kernel command line. However, in this mode ``intel_pstate`` may refuse
to work with the given processor if it does not recognize it. [Note that
``intel_pstate`` will never refuse to work with any processor with the HWP
feature enabled.]
In this mode ``intel_pstate`` registers utilization update callbacks with the
CPU scheduler in order to run a P-state selection algorithm, either
``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
setting in ``sysfs``. The current CPU frequency information to be made
available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
periodically updated by those utilization update callbacks too.
``performance``
...............
Without HWP, this P-state selection algorithm is always the same regardless of
the processor model and platform configuration.
It selects the maximum P-state it is allowed to use, subject to limits set via
``sysfs``, every time the P-state selection computations are carried out by the
driver's utilization update callback for the given CPU (that does not happen
more often than every 10 ms), but the hardware configuration will not be changed
if the new P-state is the same as the current one.
This is the default P-state selection algorithm if the
:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
is set.
``powersave``
.............
Without HWP, this P-state selection algorithm generally depends on the
processor model and/or the system profile setting in the ACPI tables and there
are two variants of it.
One of them is used with processors from the Atom line and (regardless of the
processor model) on platforms with the system profile in the ACPI tables set to
"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or
"workstation". It is also used with processors supporting the HWP feature if
that feature has not been enabled (that is, with the ``intel_pstate=no_hwp``
argument in the kernel command line). It is similar to the algorithm
implemented by the generic ``schedutil`` scaling governor except that the
utilization metric used by it is based on numbers coming from feedback
registers of the CPU. It generally selects P-states proportional to the
current CPU utilization, so it is referred to as the "proportional" algorithm.
The second variant of the ``powersave`` P-state selection algorithm, used in all
of the other cases (generally, on processors from the Core line, so it is
referred to as the "Core" algorithm), is based on the values read from the APERF
and MPERF feedback registers and the previously requested target P-state.
It does not really take CPU utilization into account explicitly, but as a rule
it causes the CPU P-state to ramp up very quickly in response to increased
utilization which is generally desirable in server environments.
Regardless of the variant, this algorithm is run by the driver's utilization
update callback for the given CPU when it is invoked by the CPU scheduler, but
not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this
particular case <Tuning Interface in debugfs_>`_). Like in the ``performance``
case, the hardware configuration is not touched if the new P-state turns out to
be the same as the current one.
This is the default P-state selection algorithm if the
:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
is not set.
Passive Mode
------------
This mode is used if the ``intel_pstate=passive`` argument is passed to the
kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
Like in the active mode without HWP support, in this mode ``intel_pstate`` may
refuse to work with the given processor if it does not recognize it.
If the driver works in this mode, the ``scaling_driver`` policy attribute in
``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
Then, the driver behaves like a regular ``CPUFreq`` scaling driver. That is,
it is invoked by generic scaling governors when necessary to talk to the
hardware in order to change the P-state of a CPU (in particular, the
``schedutil`` governor can invoke it directly from scheduler context).
While in this mode, ``intel_pstate`` can be used with all of the (generic)
scaling governors listed by the ``scaling_available_governors`` policy attribute
in ``sysfs`` (and the P-state selection algorithms described above are not
used). Then, it is responsible for the configuration of policy objects
corresponding to CPUs and provides the ``CPUFreq`` core (and the scaling
governors attached to the policy objects) with accurate information on the
maximum and minimum operating frequencies supported by the hardware (including
the so-called "turbo" frequency ranges). In other words, in the passive mode
the entire range of available P-states is exposed by ``intel_pstate`` to the
``CPUFreq`` core. However, in this mode the driver does not register
utilization update callbacks with the CPU scheduler and the ``scaling_cur_freq``
information comes from the ``CPUFreq`` core (and is the last frequency selected
by the current scaling governor for the given policy).
.. _turbo:
Turbo P-states Support
======================
In the majority of cases, the entire range of P-states available to
``intel_pstate`` can be divided into two sub-ranges that correspond to
different types of processor behavior, above and below a boundary that
will be referred to as the "turbo threshold" in what follows.
The P-states above the turbo threshold are referred to as "turbo P-states" and
the whole sub-range of P-states they belong to is referred to as the "turbo
range". These names are related to the Turbo Boost technology allowing a
multicore processor to opportunistically increase the P-state of one or more
cores if there is enough power to do that and if that is not going to cause the
thermal envelope of the processor package to be exceeded.
Specifically, if software sets the P-state of a CPU core within the turbo range
(that is, above the turbo threshold), the processor is permitted to take over
performance scaling control for that core and put it into turbo P-states of its
choice going forward. However, that permission is interpreted differently by
different processor generations. Namely, the Sandy Bridge generation of
processors will never use any P-states above the last one set by software for
the given core, even if it is within the turbo range, whereas all of the later
processor generations will take it as a license to use any P-states from the
turbo range, even above the one set by software. In other words, on those
processors setting any P-state from the turbo range will enable the processor
to put the given core into all turbo P-states up to and including the maximum
supported one as it sees fit.
One important property of turbo P-states is that they are not sustainable. More
precisely, there is no guarantee that any CPUs will be able to stay in any of
those states indefinitely, because the power distribution within the processor
package may change over time or the thermal envelope it was designed for might
be exceeded if a turbo P-state was used for too long.
In turn, the P-states below the turbo threshold generally are sustainable. In
fact, if one of them is set by software, the processor is not expected to change
it to a lower one unless in a thermal stress or a power limit violation
situation (a higher P-state may still be used if it is set for another CPU in
the same package at the same time, for example).
Some processors allow multiple cores to be in turbo P-states at the same time,
but the maximum P-state that can be set for them generally depends on the number
of cores running concurrently. The maximum turbo P-state that can be set for 3
cores at the same time usually is lower than the analogous maximum P-state for
2 cores, which in turn usually is lower than the maximum turbo P-state that can
be set for 1 core. The one-core maximum turbo P-state is thus the maximum
supported one overall.
The maximum supported turbo P-state, the turbo threshold (the maximum supported
non-turbo P-state) and the minimum supported P-state are specific to the
processor model and can be determined by reading the processor's model-specific
registers (MSRs). Moreover, some processors support the Configurable TDP
(Thermal Design Power) feature and, when that feature is enabled, the turbo
threshold effectively becomes a configurable value that can be set by the
platform firmware.
Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes
the entire range of available P-states, including the whole turbo range, to the
``CPUFreq`` core and (in the passive mode) to generic scaling governors. This
generally causes turbo P-states to be set more often when ``intel_pstate`` is
used relative to ACPI-based CPU performance scaling (see `below <acpi-cpufreq_>`_
for more information).
Moreover, since ``intel_pstate`` always knows what the real turbo threshold is
(even if the Configurable TDP feature is enabled in the processor), its
``no_turbo`` attribute in ``sysfs`` (described `below <no_turbo_attr_>`_) should
work as expected in all cases (that is, if set to disable turbo P-states, it
always should prevent ``intel_pstate`` from using them).
Processor Support
=================
To handle a given processor ``intel_pstate`` requires a number of different
pieces of information on it to be known, including:
* The minimum supported P-state.
* The maximum supported `non-turbo P-state <turbo_>`_.
* Whether or not turbo P-states are supported at all.
* The maximum supported `one-core turbo P-state <turbo_>`_ (if turbo P-states
are supported).
* The scaling formula to translate the driver's internal representation
of P-states into frequencies and the other way around.
Generally, ways to obtain that information are specific to the processor model
or family. Although it often is possible to obtain all of it from the processor
itself (using model-specific registers), there are cases in which hardware
manuals need to be consulted to get to it too.
For this reason, there is a list of supported processors in ``intel_pstate`` and
the driver initialization will fail if the detected processor is not in that
list, unless it supports the `HWP feature <Active Mode_>`_. [The interface to
obtain all of the information listed above is the same for all of the processors
supporting the HWP feature, which is why they all are supported by
``intel_pstate``.]
User Space Interface in ``sysfs``
=================================
Global Attributes
-----------------
``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
control its functionality at the system level. They are located in the
``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
CPUs.
Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
argument is passed to the kernel in the command line.
``max_perf_pct``
Maximum P-state the driver is allowed to set in percent of the
maximum supported performance level (the highest supported `turbo
P-state <turbo_>`_).
This attribute will not be exposed if the
``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
command line.
``min_perf_pct``
Minimum P-state the driver is allowed to set in percent of the
maximum supported performance level (the highest supported `turbo
P-state <turbo_>`_).
This attribute will not be exposed if the
``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
command line.
``num_pstates``
Number of P-states supported by the processor (between 0 and 255
inclusive) including both turbo and non-turbo P-states (see
`Turbo P-states Support`_).
The value of this attribute is not affected by the ``no_turbo``
setting described `below <no_turbo_attr_>`_.
This attribute is read-only.
``turbo_pct``
Ratio of the `turbo range <turbo_>`_ size to the size of the entire
range of supported P-states, in percent.
This attribute is read-only.
.. _no_turbo_attr:
``no_turbo``
If set (equal to 1), the driver is not allowed to set any turbo P-states
(see `Turbo P-states Support`_). If unset (equalt to 0, which is the
default), turbo P-states can be set by the driver.
[Note that ``intel_pstate`` does not support the general ``boost``
attribute (supported by some other scaling drivers) which is replaced
by this one.]
This attrubute does not affect the maximum supported frequency value
supplied to the ``CPUFreq`` core and exposed via the policy interface,
but it affects the maximum possible value of per-policy P-state limits
(see `Interpretation of Policy Attributes`_ below for details).
.. _status_attr:
``status``
Operation mode of the driver: "active", "passive" or "off".
"active"
The driver is functional and in the `active mode
<Active Mode_>`_.
"passive"
The driver is functional and in the `passive mode
<Passive Mode_>`_.
"off"
The driver is not functional (it is not registered as a scaling
driver with the ``CPUFreq`` core).
This attribute can be written to in order to change the driver's
operation mode or to unregister it. The string written to it must be
one of the possible values of it and, if successful, the write will
cause the driver to switch over to the operation mode represented by
that string - or to be unregistered in the "off" case. [Actually,
switching over from the active mode to the passive mode or the other
way around causes the driver to be unregistered and registered again
with a different set of callbacks, so all of its settings (the global
as well as the per-policy ones) are then reset to their default
values, possibly depending on the target operation mode.]
That only is supported in some configurations, though (for example, if
the `HWP feature is enabled in the processor <Active Mode With HWP_>`_,
the operation mode of the driver cannot be changed), and if it is not
supported in the current configuration, writes to this attribute with
fail with an appropriate error.
Interpretation of Policy Attributes
-----------------------------------
The interpretation of some ``CPUFreq`` policy attributes described in
:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
and it generally depends on the driver's `operation mode <Operation Modes_>`_.
First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
``scaling_cur_freq`` attributes are produced by applying a processor-specific
multiplier to the internal P-state representation used by ``intel_pstate``.
Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq``
attributes are capped by the frequency corresponding to the maximum P-state that
the driver is allowed to set.
If the ``no_turbo`` `global attribute <no_turbo_attr_>`_ is set, the driver is
not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq``
and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency.
Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and
``scaling_min_freq`` to go down to that value if they were above it before.
However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be
restored after unsetting ``no_turbo``, unless these attributes have been written
to after ``no_turbo`` was set.
If ``no_turbo`` is not set, the maximum possible value of ``scaling_max_freq``
and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state,
which also is the value of ``cpuinfo_max_freq`` in either case.
Next, the following policy attributes have special meaning if
``intel_pstate`` works in the `active mode <Active Mode_>`_:
``scaling_available_governors``
List of P-state selection algorithms provided by ``intel_pstate``.
``scaling_governor``
P-state selection algorithm provided by ``intel_pstate`` currently in
use with the given policy.
``scaling_cur_freq``
Frequency of the average P-state of the CPU represented by the given
policy for the time interval between the last two invocations of the
driver's utilization update callback by the CPU scheduler for that CPU.
The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
same as for other scaling drivers.
Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate``
depends on the operation mode of the driver. Namely, it is either
"intel_pstate" (in the `active mode <Active Mode_>`_) or "intel_cpufreq" (in the
`passive mode <Passive Mode_>`_).
Coordination of P-State Limits
------------------------------
``intel_pstate`` allows P-state limits to be set in two ways: with the help of
the ``max_perf_pct`` and ``min_perf_pct`` `global attributes
<Global Attributes_>`_ or via the ``scaling_max_freq`` and ``scaling_min_freq``
``CPUFreq`` policy attributes. The coordination between those limits is based
on the following rules, regardless of the current operation mode of the driver:
1. All CPUs are affected by the global limits (that is, none of them can be
requested to run faster than the global maximum and none of them can be
requested to run slower than the global minimum).
2. Each individual CPU is affected by its own per-policy limits (that is, it
cannot be requested to run faster than its own per-policy maximum and it
cannot be requested to run slower than its own per-policy minimum).
3. The global and per-policy limits can be set independently.
If the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the
resulting effective values are written into its registers whenever the limits
change in order to request its internal P-state selection logic to always set
P-states within these limits. Otherwise, the limits are taken into account by
scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver
every time before setting a new P-state for a CPU.
Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument
is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed
at all and the only way to set the limits is by using the policy attributes.
Energy vs Performance Hints
---------------------------
If ``intel_pstate`` works in the `active mode with the HWP feature enabled
<Active Mode With HWP_>`_ in the processor, additional attributes are present
in every ``CPUFreq`` policy directory in ``sysfs``. They are intended to allow
user space to help ``intel_pstate`` to adjust the processor's internal P-state
selection logic by focusing it on performance or on energy-efficiency, or
somewhere between the two extremes:
``energy_performance_preference``
Current value of the energy vs performance hint for the given policy
(or the CPU represented by it).
The hint can be changed by writing to this attribute.
``energy_performance_available_preferences``
List of strings that can be written to the
``energy_performance_preference`` attribute.
They represent different energy vs performance hints and should be
self-explanatory, except that ``default`` represents whatever hint
value was set by the platform firmware.
Strings written to the ``energy_performance_preference`` attribute are
internally translated to integer values written to the processor's
Energy-Performance Preference (EPP) knob (if supported) or its
Energy-Performance Bias (EPB) knob.
[Note that tasks may by migrated from one CPU to another by the scheduler's
load-balancing algorithm and if different energy vs performance hints are
set for those CPUs, that may lead to undesirable outcomes. To avoid such
issues it is better to set the same energy vs performance hint for all CPUs
or to pin every task potentially sensitive to them to a specific CPU.]
.. _acpi-cpufreq:
``intel_pstate`` vs ``acpi-cpufreq``
====================================
On the majority of systems supported by ``intel_pstate``, the ACPI tables
provided by the platform firmware contain ``_PSS`` objects returning information
that can be used for CPU performance scaling (refer to the `ACPI specification`_
for details on the ``_PSS`` objects and the format of the information returned
by them).
The information returned by the ACPI ``_PSS`` objects is used by the
``acpi-cpufreq`` scaling driver. On systems supported by ``intel_pstate``
the ``acpi-cpufreq`` driver uses the same hardware CPU performance scaling
interface, but the set of P-states it can use is limited by the ``_PSS``
output.
On those systems each ``_PSS`` object returns a list of P-states supported by
the corresponding CPU which basically is a subset of the P-states range that can
be used by ``intel_pstate`` on the same system, with one exception: the whole
`turbo range <turbo_>`_ is represented by one item in it (the topmost one). By
convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz
than the frequency of the highest non-turbo P-state listed by it, but the
corresponding P-state representation (following the hardware specification)
returned for it matches the maximum supported turbo P-state (or is the
special value 255 meaning essentially "go as high as you can get").
The list of P-states returned by ``_PSS`` is reflected by the table of
available frequencies supplied by ``acpi-cpufreq`` to the ``CPUFreq`` core and
scaling governors and the minimum and maximum supported frequencies reported by
it come from that list as well. In particular, given the special representation
of the turbo range described above, this means that the maximum supported
frequency reported by ``acpi-cpufreq`` is higher by 1 MHz than the frequency
of the highest supported non-turbo P-state listed by ``_PSS`` which, of course,
affects decisions made by the scaling governors, except for ``powersave`` and
``performance``.
For example, if a given governor attempts to select a frequency proportional to
estimated CPU load and maps the load of 100% to the maximum supported frequency
(possibly multiplied by a constant), then it will tend to choose P-states below
the turbo threshold if ``acpi-cpufreq`` is used as the scaling driver, because
in that case the turbo range corresponds to a small fraction of the frequency
band it can use (1 MHz vs 1 GHz or more). In consequence, it will only go to
the turbo range for the highest loads and the other loads above 50% that might
benefit from running at turbo frequencies will be given non-turbo P-states
instead.
One more issue related to that may appear on systems supporting the
`Configurable TDP feature <turbo_>`_ allowing the platform firmware to set the
turbo threshold. Namely, if that is not coordinated with the lists of P-states
returned by ``_PSS`` properly, there may be more than one item corresponding to
a turbo P-state in those lists and there may be a problem with avoiding the
turbo range (if desirable or necessary). Usually, to avoid using turbo
P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed
by ``_PSS``, but that is not sufficient when there are other turbo P-states in
the list returned by it.
Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the
`passive mode <Passive Mode_>`_, except that the number of P-states it can set
is limited to the ones listed by the ACPI ``_PSS`` objects.
Kernel Command Line Options for ``intel_pstate``
================================================
Several kernel command line options can be used to pass early-configuration-time
parameters to ``intel_pstate`` in order to enforce specific behavior of it. All
of them have to be prepended with the ``intel_pstate=`` prefix.
``disable``
Do not register ``intel_pstate`` as the scaling driver even if the
processor is supported by it.
``passive``
Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to
start with.
This option implies the ``no_hwp`` one described below.
``force``
Register ``intel_pstate`` as the scaling driver instead of
``acpi-cpufreq`` even if the latter is preferred on the given system.
This may prevent some platform features (such as thermal controls and
power capping) that rely on the availability of ACPI P-states
information from functioning as expected, so it should be used with
caution.
This option does not work with processors that are not supported by
``intel_pstate`` and on platforms where the ``pcc-cpufreq`` scaling
driver is used instead of ``acpi-cpufreq``.
``no_hwp``
Do not enable the `hardware-managed P-states (HWP) feature
<Active Mode With HWP_>`_ even if it is supported by the processor.
``hwp_only``
Register ``intel_pstate`` as the scaling driver only if the
`hardware-managed P-states (HWP) feature <Active Mode With HWP_>`_ is
supported by the processor.
``support_acpi_ppc``
Take ACPI ``_PPC`` performance limits into account.
If the preferred power management profile in the FADT (Fixed ACPI
Description Table) is set to "Enterprise Server" or "Performance
Server", the ACPI ``_PPC`` limits are taken into account by default
and this option has no effect.
``per_cpu_perf_limits``
Use per-logical-CPU P-State limits (see `Coordination of P-state
Limits`_ for details).
Diagnostics and Tuning
======================
Trace Events
------------
There are two static trace events that can be used for ``intel_pstate``
diagnostics. One of them is the ``cpu_frequency`` trace event generally used
by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific
to ``intel_pstate``. Both of them are triggered by ``intel_pstate`` only if
it works in the `active mode <Active Mode_>`_.
The following sequence of shell commands can be used to enable them and see
their output (if the kernel is generally configured to support event tracing)::
# cd /sys/kernel/debug/tracing/
# echo 1 > events/power/pstate_sample/enable
# echo 1 > events/power/cpu_frequency/enable
# cat trace
gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476
cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
If ``intel_pstate`` works in the `passive mode <Passive Mode_>`_, the
``cpu_frequency`` trace event will be triggered either by the ``schedutil``
scaling governor (for the policies it is attached to), or by the ``CPUFreq``
core (for the policies with other scaling governors).
``ftrace``
----------
The ``ftrace`` interface can be used for low-level diagnostics of
``intel_pstate``. For example, to check how often the function to set a
P-state is called, the ``ftrace`` filter can be set to to
:c:func:`intel_pstate_set_pstate`::
# cd /sys/kernel/debug/tracing/
# cat available_filter_functions | grep -i pstate
intel_pstate_set_pstate
intel_pstate_cpu_init
...
# echo intel_pstate_set_pstate > set_ftrace_filter
# echo function > current_tracer
# cat trace | head -15
# tracer: function
#
# entries-in-buffer/entries-written: 80/80 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
<idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
Tuning Interface in ``debugfs``
-------------------------------
The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of
processors in the active mode <powersave_>`_ is based on a `PID controller`_
whose parameters were chosen to address a number of different use cases at the
same time. However, it still is possible to fine-tune it to a specific workload
and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is
provided for this purpose. [Note that the ``pstate_snb`` directory will be
present only if the specific P-state selection algorithm matching the interface
in it actually is in use.]
The following files present in that directory can be used to modify the PID
controller parameters at run time:
| ``deadband``
| ``d_gain_pct``
| ``i_gain_pct``
| ``p_gain_pct``
| ``sample_rate_ms``
| ``setpoint``
Note, however, that achieving desirable results this way generally requires
expert-level understanding of the power vs performance tradeoff, so extra care
is recommended when attempting to do that.
.. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
.. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html
.. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
.. _PID controller: https://en.wikipedia.org/wiki/PID_controller

281
Documentation/cpu-freq/intel-pstate.txt
View File

@ -1,281 +0,0 @@
Intel P-State driver
--------------------
This driver provides an interface to control the P-State selection for the
SandyBridge+ Intel processors.
The following document explains P-States:
http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
As stated in the document, P-State doesn’t exactly mean a frequency. However, for
the sake of the relationship with cpufreq, P-State and frequency are used
interchangeably.
Understanding the cpufreq core governors and policies are important before
discussing more details about the Intel P-State driver. Based on what callbacks
a cpufreq driver provides to the cpufreq core, it can support two types of
drivers:
- with target_index() callback: In this mode, the drivers using cpufreq core
simply provide the minimum and maximum frequency limits and an additional
interface target_index() to set the current frequency. The cpufreq subsystem
has a number of scaling governors ("performance", "powersave", "ondemand",
etc.). Depending on which governor is in use, cpufreq core will call for
transitions to a specific frequency using target_index() callback.
- setpolicy() callback: In this mode, drivers do not provide target_index()
callback, so cpufreq core can't request a transition to a specific frequency.
The driver provides minimum and maximum frequency limits and callbacks to set a
policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
The cpufreq core can request the driver to operate in any of the two policies:
"performance" and "powersave". The driver decides which frequency to use based
on the above policy selection considering minimum and maximum frequency limits.
The Intel P-State driver falls under the latter category, which implements the
setpolicy() callback. This driver decides what P-State to use based on the
requested policy from the cpufreq core. If the processor is capable of
selecting its next P-State internally, then the driver will offload this
responsibility to the processor (aka HWP: Hardware P-States). If not, the
driver implements algorithms to select the next P-State.
Since these policies are implemented in the driver, they are not same as the
cpufreq scaling governors implementation, even if they have the same name in
the cpufreq sysfs (scaling_governors). For example the "performance" policy is
similar to cpufreq’s "performance" governor, but "powersave" is completely
different than the cpufreq "powersave" governor. The strategy here is similar
to cpufreq "ondemand", where the requested P-State is related to the system load.
Sysfs Interface
In addition to the frequency-controlling interfaces provided by the cpufreq
core, the driver provides its own sysfs files to control the P-State selection.
These files have been added to /sys/devices/system/cpu/intel_pstate/.
Any changes made to these files are applicable to all CPUs (even in a
multi-package system, Refer to later section on placing "Per-CPU limits").
max_perf_pct: Limits the maximum P-State that will be requested by
the driver. It states it as a percentage of the available performance. The
available (P-State) performance may be reduced by the no_turbo
setting described below.
min_perf_pct: Limits the minimum P-State that will be requested by
the driver. It states it as a percentage of the max (non-turbo)
performance level.
no_turbo: Limits the driver to selecting P-State below the turbo
frequency range.
turbo_pct: Displays the percentage of the total performance that
is supported by hardware that is in the turbo range. This number
is independent of whether turbo has been disabled or not.
num_pstates: Displays the number of P-States that are supported
by hardware. This number is independent of whether turbo has
been disabled or not.
For example, if a system has these parameters:
Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
Max non turbo ratio: 0x17
Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
Sysfs will show :
max_perf_pct:100, which corresponds to 1 core ratio
min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
no_turbo:0, turbo is not disabled
num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3: System Programming Guide" to understand ratios.
There is one more sysfs attribute in /sys/devices/system/cpu/intel_pstate/
that can be used for controlling the operation mode of the driver:
status: Three settings are possible:
"off" - The driver is not in use at this time.
"active" - The driver works as a P-state governor (default).
"passive" - The driver works as a regular cpufreq one and collaborates
with the generic cpufreq governors (it sets P-states as
requested by those governors).
The current setting is returned by reads from this attribute. Writing one
of the above strings to it changes the operation mode as indicated by that
string, if possible. If HW-managed P-states (HWP) are enabled, it is not
possible to change the driver's operation mode and attempts to write to
this attribute will fail.
cpufreq sysfs for Intel P-State
Since this driver registers with cpufreq, cpufreq sysfs is also presented.
There are some important differences, which need to be considered.
scaling_cur_freq: This displays the real frequency which was used during
the last sample period instead of what is requested. Some other cpufreq driver,
like acpi-cpufreq, displays what is requested (Some changes are on the
way to fix this for acpi-cpufreq driver). The same is true for frequencies
displayed at /proc/cpuinfo.
scaling_governor: This displays current active policy. Since each CPU has a
cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
is not possible with Intel P-States, as there is one common policy for all
CPUs. Here, the last requested policy will be applicable to all CPUs. It is
suggested that one use the cpupower utility to change policy to all CPUs at the
same time.
scaling_setspeed: This attribute can never be used with Intel P-State.
scaling_max_freq/scaling_min_freq: This interface can be used similarly to
the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
are converted to nearest possible P-State, this is prone to rounding errors.
This method is not preferred to limit performance.
affected_cpus: Not used
related_cpus: Not used
For contemporary Intel processors, the frequency is controlled by the
processor itself and the P-State exposed to software is related to
performance levels. The idea that frequency can be set to a single
frequency is fictional for Intel Core processors. Even if the scaling
driver selects a single P-State, the actual frequency the processor
will run at is selected by the processor itself.
Per-CPU limits
The kernel command line option "intel_pstate=per_cpu_perf_limits" forces
the intel_pstate driver to use per-CPU performance limits. When it is set,
the sysfs control interface described above is subject to limitations.
- The following controls are not available for both read and write
/sys/devices/system/cpu/intel_pstate/max_perf_pct
/sys/devices/system/cpu/intel_pstate/min_perf_pct
- The following controls can be used to set performance limits, as far as the
architecture of the processor permits:
/sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
/sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
- User can still observe turbo percent and number of P-States from
/sys/devices/system/cpu/intel_pstate/turbo_pct
/sys/devices/system/cpu/intel_pstate/num_pstates
- User can read write system wide turbo status
/sys/devices/system/cpu/no_turbo
Support of energy performance hints
It is possible to provide hints to the HWP algorithms in the processor
to be more performance centric to more energy centric. When the driver
is using HWP, two additional cpufreq sysfs attributes are presented for
each logical CPU.
These attributes are:
- energy_performance_available_preferences
- energy_performance_preference
To get list of supported hints:
$ cat energy_performance_available_preferences
default performance balance_performance balance_power power
The current preference can be read or changed via cpufreq sysfs
attribute "energy_performance_preference". Reading from this attribute
will display current effective setting. User can write any of the valid
preference string to this attribute. User can always restore to power-on
default by writing "default".
Since threads can migrate to different CPUs, this is possible that the
new CPU may have different energy performance preference than the previous
one. To avoid such issues, either threads can be pinned to specific CPUs
or set the same energy performance preference value to all CPUs.
Tuning Intel P-State driver
When the performance can be tuned using PID (Proportional Integral
Derivative) controller, debugfs files are provided for adjusting performance.
They are presented under:
/sys/kernel/debug/pstate_snb/
The PID tunable parameters are:
deadband
d_gain_pct
i_gain_pct
p_gain_pct
sample_rate_ms
setpoint
To adjust these parameters, some understanding of driver implementation is
necessary. There are some tweeks described here, but be very careful. Adjusting
them requires expert level understanding of power and performance relationship.
These limits are only useful when the "powersave" policy is active.
-To make the system more responsive to load changes, sample_rate_ms can
be adjusted (current default is 10ms).
-To make the system use higher performance, even if the load is lower, setpoint
can be adjusted to a lower number. This will also lead to faster ramp up time
to reach the maximum P-State.
If there are no derivative and integral coefficients, The next P-State will be
equal to:
current P-State - ((setpoint - current cpu load) * p_gain_pct)
For example, if the current PID parameters are (Which are defaults for the core
processors like SandyBridge):
deadband = 0
d_gain_pct = 0
i_gain_pct = 0
p_gain_pct = 20
sample_rate_ms = 10
setpoint = 97
If the current P-State = 0x08 and current load = 100, this will result in the
next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
goes up by only 1. If during next sample interval the current load doesn't
change and still 100, then P-State goes up by one again. This process will
continue as long as the load is more than the setpoint until the maximum P-State
is reached.
For the same load at setpoint = 60, this will result in the next P-State
= 0x08 - ((60 - 100) * 0.2) = 16
So by changing the setpoint from 97 to 60, there is an increase of the
next P-State from 9 to 16. So this will make processor execute at higher
P-State for the same CPU load. If the load continues to be more than the
setpoint during next sample intervals, then P-State will go up again till the
maximum P-State is reached. But the ramp up time to reach the maximum P-State
will be much faster when the setpoint is 60 compared to 97.
Debugging Intel P-State driver
Event tracing
To debug P-State transition, the Linux event tracing interface can be used.
There are two specific events, which can be enabled (Provided the kernel
configs related to event tracing are enabled).
# cd /sys/kernel/debug/tracing/
# echo 1 > events/power/pstate_sample/enable
# echo 1 > events/power/cpu_frequency/enable
# cat trace
gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107
scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
freq=2474476
cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
Using ftrace
If function level tracing is required, the Linux ftrace interface can be used.
For example if we want to check how often a function to set a P-State is
called, we can set ftrace filter to intel_pstate_set_pstate.
# cd /sys/kernel/debug/tracing/
# cat available_filter_functions | grep -i pstate
intel_pstate_set_pstate
intel_pstate_cpu_init
...
# echo intel_pstate_set_pstate > set_ftrace_filter
# echo function > current_tracer
# cat trace | head -15
# tracer: function
#
# entries-in-buffer/entries-written: 80/80 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
<idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func

31
Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt
View File

@ -1,31 +0,0 @@
Hi6220 SoC ION
===================================================================
Required properties:
- compatible : "hisilicon,hi6220-ion"
- list of the ION heaps
- heap name : maybe heap_sys_user@0
- heap id : id should be unique in the system.
- heap base : base ddr address of the heap,0 means that
it is dynamic.
- heap size : memory size and 0 means it is dynamic.
- heap type : the heap type of the heap, please also
see the define in ion.h(drivers/staging/android/uapi/ion.h)
-------------------------------------------------------------------
Example:
hi6220-ion {
compatible = "hisilicon,hi6220-ion";
heap_sys_user@0 {
heap-name = "sys_user";
heap-id = <0x0>;
heap-base = <0x0>;
heap-size = <0x0>;
heap-type = "ion_system";
};
heap_sys_contig@0 {
heap-name = "sys_contig";
heap-id = <0x1>;
heap-base = <0x0>;
heap-size = <0x0>;
heap-type = "ion_system_contig";
};
};

6
Documentation/usb/typec.rst
View File

@ -114,8 +114,7 @@ the details during registration. The class offers the following API for
registering/unregistering cables and their plugs:
.. kernel-doc:: drivers/usb/typec/typec.c
:functions: typec_register_cable typec_unregister_cable typec_register_plug
typec_unregister_plug
:functions: typec_register_cable typec_unregister_cable typec_register_plug typec_unregister_plug
The class will provide a handle to struct typec_cable and struct typec_plug if
the registration is successful, or NULL if it isn't.
@ -137,8 +136,7 @@ during connection of a partner or cable, the port driver must use the following
APIs to report it to the class:
.. kernel-doc:: drivers/usb/typec/typec.c
:functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role
typec_set_pwr_opmode
:functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role typec_set_pwr_opmode
Alternate Modes
~~~~~~~~~~~~~~~

2
Documentation/watchdog/watchdog-parameters.txt
View File

@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped once started
-------------------------------------------------
iTCO_wdt:
heartbeat: Watchdog heartbeat in seconds.
(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
(5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------

15
MAINTAINERS
View File

@ -846,7 +846,6 @@ M: Laura Abbott <labbott@redhat.com>
M: Sumit Semwal <sumit.semwal@linaro.org>
L: devel@driverdev.osuosl.org
S: Supported
F: Documentation/devicetree/bindings/staging/ion/
F: drivers/staging/android/ion
F: drivers/staging/android/uapi/ion.h
F: drivers/staging/android/uapi/ion_test.h
@ -3116,6 +3115,14 @@ F: drivers/net/ieee802154/cc2520.c
F: include/linux/spi/cc2520.h
F: Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
CCREE ARM TRUSTZONE CRYPTOCELL 700 REE DRIVER
M: Gilad Ben-Yossef <gilad@benyossef.com>
L: linux-crypto@vger.kernel.org
L: driverdev-devel@linuxdriverproject.org
S: Supported
F: drivers/staging/ccree/
W: https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family
CEC FRAMEWORK
M: Hans Verkuil <hans.verkuil@cisco.com>
L: linux-media@vger.kernel.org
@ -5695,7 +5702,7 @@ M: Alex Elder <elder@kernel.org>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Maintained
F: drivers/staging/greybus/
L: greybus-dev@lists.linaro.org
L: greybus-dev@lists.linaro.org (moderated for non-subscribers)
GREYBUS AUDIO PROTOCOLS DRIVERS
M: Vaibhav Agarwal <vaibhav.sr@gmail.com>
@ -9553,10 +9560,6 @@ F: drivers/net/wireless/intersil/orinoco/
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <ooo@electrozaur.com>
M: Benny Halevy <bhalevy@primarydata.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
S: Maintained
F: drivers/scsi/osd/
F: include/scsi/osd_*

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 12
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc2
NAME = Fearless Coyote
# *DOCUMENTATION*

6
arch/alpha/kernel/osf_sys.c
View File

@ -1201,8 +1201,10 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
return -EFAULT;
err = 0;
err |= put_user(status, ustatus);
err = put_user(status, ustatus);
if (ret < 0)
return err ? err : ret;
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

2
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
View File

@ -1,6 +1,6 @@
/ {
aliases {
ethernet = &ethernet;
ethernet0 = &ethernet;
};
};

2
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
View File

@ -1,6 +1,6 @@
/ {
aliases {
ethernet = &ethernet;
ethernet0 = &ethernet;
};
};

22
arch/arm/boot/dts/bcm283x.dtsi
View File

@ -198,8 +198,8 @@
brcm,pins = <0 1>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
i2c0_gpio32: i2c0_gpio32 {
brcm,pins = <32 34>;
i2c0_gpio28: i2c0_gpio28 {
brcm,pins = <28 29>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
i2c0_gpio44: i2c0_gpio44 {
@ -295,20 +295,28 @@
/* Separate from the uart0_gpio14 group
* because it conflicts with spi1_gpio16, and
* people often run uart0 on the two pins
* without flow contrl.
* without flow control.
*/
uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
brcm,pins = <16 17>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
uart0_gpio30: uart0_gpio30 {
uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
uart0_gpio32: uart0_gpio32 {
brcm,pins = <32 33>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
uart0_gpio36: uart0_gpio36 {
brcm,pins = <36 37>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
brcm,pins = <38 39>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
uart1_gpio14: uart1_gpio14 {
brcm,pins = <14 15>;
@ -326,10 +334,6 @@
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
uart1_gpio36: uart1_gpio36 {
brcm,pins = <36 37 38 39>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
uart1_gpio40: uart1_gpio40 {
brcm,pins = <40 41>;
brcm,function = <BCM2835_FSEL_ALT5>;

2
arch/arm/boot/dts/dra7-evm.dts
View File

@ -204,6 +204,8 @@
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
ti,palmas-override-powerhold;
ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";

4
arch/arm/boot/dts/dra7.dtsi
View File

@ -2017,4 +2017,8 @@
coefficients = <0 2000>;
};
&cpu_crit {
temperature = <120000>; /* milli Celsius */
};
/include/ "dra7xx-clocks.dtsi"

2
arch/arm/boot/dts/imx53-qsrb.dts
View File

@ -23,7 +23,7 @@
imx53-qsrb {
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */
>;
};
};

17
arch/arm/boot/dts/imx6sx-sdb.dts
View File

@ -12,23 +12,6 @@
model = "Freescale i.MX6 SoloX SDB RevB Board";
};
&cpu0 {
operating-points = <
/* kHz uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";

1
arch/arm/boot/dts/include/arm
View File

@ -1 +0,0 @@
..

1
arch/arm/boot/dts/include/arm64
View File

@ -1 +0,0 @@
../../../../arm64/boot/dts

1
arch/arm/boot/dts/include/dt-bindings
View File

@ -1 +0,0 @@
../../../../../include/dt-bindings

6
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
View File

@ -249,9 +249,9 @@
OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */

2
arch/arm/boot/dts/mt7623.dtsi
View File

@ -72,6 +72,8 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <13000000>;
arm,cpu-registers-not-fw-configured;
};
watchdog: watchdog@10007000 {

3
arch/arm/boot/dts/omap3-gta04.dtsi
View File

@ -55,7 +55,8 @@
simple-audio-card,bitclock-master = <&telephony_link_master>;
simple-audio-card,frame-master = <&telephony_link_master>;
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-inversion;
simple-audio-card,frame-inversion;
simple-audio-card,cpu {
sound-dai = <&mcbsp4>;
};

2
arch/arm/boot/dts/omap4-panda-a4.dts
View File

@ -13,7 +13,7 @@
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;

2
arch/arm/boot/dts/omap4-panda-es.dts
View File

@ -34,7 +34,7 @@
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;

68
arch/arm/configs/gemini_defconfig Normal file
View File

@ -0,0 +1,68 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_USER_NS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTI_V4=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_GEMINI=y
CONFIG_PCI=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="console=ttyS0,115200n8"
CONFIG_KEXEC=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_GEMINI_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_MON=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GEMINI=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_ROMFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y

3
arch/arm/include/asm/kvm_coproc.h
View File

@ -31,7 +31,8 @@ void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table);
int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run);

106
arch/arm/kvm/coproc.c
View File

@ -32,6 +32,7 @@
#include <asm/vfp.h>
#include "../vfp/vfpinstr.h"
#define CREATE_TRACE_POINTS
#include "trace.h"
#include "coproc.h"
@ -111,12 +112,6 @@ int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 1;
}
int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
kvm_inject_undefined(vcpu);
return 1;
}
static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
{
/*
@ -284,7 +279,7 @@ static bool access_gic_sre(struct kvm_vcpu *vcpu,
* must always support PMCCNTR (the cycle counter): we just RAZ/WI for
* all PM registers, which doesn't crash the guest kernel at least.
*/
static bool pm_fake(struct kvm_vcpu *vcpu,
static bool trap_raz_wi(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
@ -294,19 +289,19 @@ static bool pm_fake(struct kvm_vcpu *vcpu,
return read_zero(vcpu, p);
}
#define access_pmcr pm_fake
#define access_pmcntenset pm_fake
#define access_pmcntenclr pm_fake
#define access_pmovsr pm_fake
#define access_pmselr pm_fake
#define access_pmceid0 pm_fake
#define access_pmceid1 pm_fake
#define access_pmccntr pm_fake
#define access_pmxevtyper pm_fake
#define access_pmxevcntr pm_fake
#define access_pmuserenr pm_fake
#define access_pmintenset pm_fake
#define access_pmintenclr pm_fake
#define access_pmcr trap_raz_wi
#define access_pmcntenset trap_raz_wi
#define access_pmcntenclr trap_raz_wi
#define access_pmovsr trap_raz_wi
#define access_pmselr trap_raz_wi
#define access_pmceid0 trap_raz_wi
#define access_pmceid1 trap_raz_wi
#define access_pmccntr trap_raz_wi
#define access_pmxevtyper trap_raz_wi
#define access_pmxevcntr trap_raz_wi
#define access_pmuserenr trap_raz_wi
#define access_pmintenset trap_raz_wi
#define access_pmintenclr trap_raz_wi
/* Architected CP15 registers.
* CRn denotes the primary register number, but is copied to the CRm in the
@ -532,12 +527,7 @@ static int emulate_cp15(struct kvm_vcpu *vcpu,
return 1;
}
/**
* kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
static struct coproc_params decode_64bit_hsr(struct kvm_vcpu *vcpu)
{
struct coproc_params params;
@ -551,9 +541,38 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf;
params.CRm = 0;
return params;
}
/**
* kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
struct coproc_params params = decode_64bit_hsr(vcpu);
return emulate_cp15(vcpu, &params);
}
/**
* kvm_handle_cp14_64 -- handles a mrrc/mcrr trap on a guest CP14 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
struct coproc_params params = decode_64bit_hsr(vcpu);
/* raz_wi cp14 */
trap_raz_wi(vcpu, &params, NULL);
/* handled */
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
return 1;
}
static void reset_coproc_regs(struct kvm_vcpu *vcpu,
const struct coproc_reg *table, size_t num)
{
@ -564,12 +583,7 @@ static void reset_coproc_regs(struct kvm_vcpu *vcpu,
table[i].reset(vcpu, &table[i]);
}
/**
* kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu)
{
struct coproc_params params;
@ -583,9 +597,37 @@ int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7;
params.Rt2 = 0;
return params;
}
/**
* kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
struct coproc_params params = decode_32bit_hsr(vcpu);
return emulate_cp15(vcpu, &params);
}
/**
* kvm_handle_cp14_32 -- handles a mrc/mcr trap on a guest CP14 access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
struct coproc_params params = decode_32bit_hsr(vcpu);
/* raz_wi cp14 */
trap_raz_wi(vcpu, &params, NULL);
/* handled */
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
return 1;
}
/******************************************************************************
* Userspace API
*****************************************************************************/

4
arch/arm/kvm/handle_exit.c
View File

@ -95,9 +95,9 @@ static exit_handle_fn arm_exit_handlers[] = {
[HSR_EC_WFI] = kvm_handle_wfx,
[HSR_EC_CP15_32] = kvm_handle_cp15_32,
[HSR_EC_CP15_64] = kvm_handle_cp15_64,
[HSR_EC_CP14_MR] = kvm_handle_cp14_access,
[HSR_EC_CP14_MR] = kvm_handle_cp14_32,
[HSR_EC_CP14_LS] = kvm_handle_cp14_load_store,
[HSR_EC_CP14_64] = kvm_handle_cp14_access,
[HSR_EC_CP14_64] = kvm_handle_cp14_64,
[HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access,
[HSR_EC_CP10_ID] = kvm_handle_cp10_id,
[HSR_EC_HVC] = handle_hvc,

2
arch/arm/kvm/hyp/Makefile
View File

@ -2,6 +2,8 @@
# Makefile for Kernel-based Virtual Machine module, HYP part
#
ccflags-y += -fno-stack-protector
KVM=../../../../virt/kvm
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o

4
arch/arm/kvm/hyp/switch.c
View File

@ -48,7 +48,9 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host)
write_sysreg(HSTR_T(15), HSTR);
write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR);
val = read_sysreg(HDCR);
write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR);
val |= HDCR_TPM | HDCR_TPMCR; /* trap performance monitors */
val |= HDCR_TDRA | HDCR_TDOSA | HDCR_TDA; /* trap debug regs */
write_sysreg(val, HDCR);
}
static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)

8
arch/arm/kvm/trace.h
View File

@ -1,5 +1,5 @@
#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_KVM_H
#if !defined(_TRACE_ARM_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_ARM_KVM_H
#include <linux/tracepoint.h>
@ -74,10 +74,10 @@ TRACE_EVENT(kvm_hvc,
__entry->vcpu_pc, __entry->r0, __entry->imm)
);
#endif /* _TRACE_KVM_H */
#endif /* _TRACE_ARM_KVM_H */
#undef TRACE_INCLUDE_PATH
#define TRACE_INCLUDE_PATH arch/arm/kvm
#define TRACE_INCLUDE_PATH .
#undef TRACE_INCLUDE_FILE
#define TRACE_INCLUDE_FILE trace

2
arch/arm/mach-at91/pm.c
View File

@ -335,7 +335,7 @@ static const struct ramc_info ramc_infos[] __initconst = {
{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
};
static const struct of_device_id const ramc_ids[] __initconst = {
static const struct of_device_id ramc_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },

2
arch/arm/mach-bcm/bcm_kona_smc.c
View File

@ -33,7 +33,7 @@ struct bcm_kona_smc_data {
unsigned result;
};
static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
{.compatible = "brcm,kona-smc"},
{.compatible = "bcm,kona-smc"}, /* deprecated name */
{},

2
arch/arm/mach-cns3xxx/core.c
View File

@ -346,7 +346,7 @@ static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
.power_off = csn3xxx_usb_power_off,
};
static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = {
static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },

3
arch/arm/mach-omap2/common.h
View File

@ -266,11 +266,12 @@ extern int omap4_cpu_kill(unsigned int cpu);
extern const struct smp_operations omap4_smp_ops;
#endif
extern u32 omap4_get_cpu1_ns_pa_addr(void);
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
extern int omap4_mpuss_init(void);
extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
extern u32 omap4_get_cpu1_ns_pa_addr(void);
#else
static inline int omap4_enter_lowpower(unsigned int cpu,
unsigned int power_state)

10
arch/arm/mach-omap2/omap-mpuss-lowpower.c
View File

@ -213,11 +213,6 @@ static void __init save_l2x0_context(void)
{}
#endif
u32 omap4_get_cpu1_ns_pa_addr(void)
{
return old_cpu1_ns_pa_addr;
}
/**
* omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
* The purpose of this function is to manage low power programming
@ -457,6 +452,11 @@ int __init omap4_mpuss_init(void)
#endif
u32 omap4_get_cpu1_ns_pa_addr(void)
{
return old_cpu1_ns_pa_addr;
}
/*
* For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
* current kernel's secondary_startup() early before

11
arch/arm/mach-omap2/omap-smp.c
View File

@ -306,7 +306,6 @@ static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c)
cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
OMAP_AUX_CORE_BOOT_1);
cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
/* Did the configured secondary_startup() get overwritten? */
if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
@ -316,9 +315,13 @@ static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c)
* If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
* deeper idle state in WFI and will wake to an invalid address.
*/
if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
needs_reset = true;
if ((soc_is_omap44xx() || soc_is_omap54xx())) {
cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
if (!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
needs_reset = true;
} else {
cpu1_ns_pa_addr = 0;
}
if (!needs_reset || !c->cpu1_rstctrl_va)
return;

2
arch/arm/mach-omap2/prm_common.c
View File

@ -711,7 +711,7 @@ static struct omap_prcm_init_data scrm_data __initdata = {
};
#endif
static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
#ifdef CONFIG_SOC_AM33XX
{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
#endif

2
arch/arm/mach-omap2/vc.c
View File

@ -559,7 +559,7 @@ struct i2c_init_data {
u8 hsscll_12;
};
static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {
static const struct i2c_init_data omap4_i2c_timing_data[] __initconst = {
{
.load = 50,
.loadbits = 0x3,

2
arch/arm/mach-spear/time.c
View File

@ -204,7 +204,7 @@ static void __init spear_clockevent_init(int irq)
setup_irq(irq, &spear_timer_irq);
}
static const struct of_device_id const timer_of_match[] __initconst = {
static const struct of_device_id timer_of_match[] __initconst = {
{ .compatible = "st,spear-timer", },
{ },
};

5
arch/arm64/Kconfig.platforms
View File

@ -106,8 +106,13 @@ config ARCH_MVEBU
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select GPIOLIB
select GPIOLIB_IRQCHIP
select MVEBU_ODMI
select MVEBU_PIC
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family

1
arch/arm64/boot/dts/include/arm
View File

@ -1 +0,0 @@
../../../../arm/boot/dts

1
arch/arm64/boot/dts/include/arm64
View File

@ -1 +0,0 @@
..

1
arch/arm64/boot/dts/include/dt-bindings
View File

@ -1 +0,0 @@
../../../../../include/dt-bindings

8
arch/arm64/boot/dts/marvell/armada-3720-db.dts
View File

@ -79,6 +79,8 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
gpio_exp: pca9555@22 {
@ -113,6 +115,8 @@
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
m25p80@0 {
compatible = "jedec,spi-nor";
@ -143,6 +147,8 @@
/* Exported on the micro USB connector CON32 through an FTDI */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
@ -184,6 +190,8 @@
};
&eth0 {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii-id";
phy = <&phy0>;
status = "okay";

73
arch/arm64/boot/dts/marvell/armada-37xx.dtsi
View File

@ -161,16 +161,83 @@
#clock-cells = <1>;
};
gpio1: gpio@13800 {
compatible = "marvell,mvebu-gpio-3700",
pinctrl_nb: pinctrl@13800 {
compatible = "marvell,armada3710-nb-pinctrl",
"syscon", "simple-mfd";
reg = <0x13800 0x500>;
reg = <0x13800 0x100>, <0x13C00 0x20>;
gpionb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_nb 0 0 36>;
gpio-controller;
interrupts =
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
};
xtalclk: xtal-clk {
compatible = "marvell,armada-3700-xtal-clock";
clock-output-names = "xtal";
#clock-cells = <0>;
};
spi_quad_pins: spi-quad-pins {
groups = "spi_quad";
function = "spi";
};
i2c1_pins: i2c1-pins {
groups = "i2c1";
function = "i2c";
};
i2c2_pins: i2c2-pins {
groups = "i2c2";
function = "i2c";
};
uart1_pins: uart1-pins {
groups = "uart1";
function = "uart";
};
uart2_pins: uart2-pins {
groups = "uart2";
function = "uart";
};
};
pinctrl_sb: pinctrl@18800 {
compatible = "marvell,armada3710-sb-pinctrl",
"syscon", "simple-mfd";
reg = <0x18800 0x100>, <0x18C00 0x20>;
gpiosb: gpio {
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_sb 0 0 29>;
gpio-controller;
interrupts =
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
};
rgmii_pins: mii-pins {
groups = "rgmii";
function = "mii";
};
};
eth0: ethernet@30000 {

3
arch/arm64/boot/dts/mediatek/mt8173-evb.dts
View File

@ -134,6 +134,9 @@
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
mediatek,hs200-cmd-int-delay=<26>;
mediatek,hs400-cmd-int-delay=<14>;
mediatek,hs400-cmd-resp-sel-rising;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
non-removable;

2
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
View File

@ -44,7 +44,7 @@
/dts-v1/;
#include "rk3399-gru.dtsi"
#include <include/dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/linux-event-codes.h>
/*
* Kevin-specific things

112
arch/arm64/configs/defconfig
View File

@ -30,7 +30,6 @@ CONFIG_PROFILING=y
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
@ -62,16 +61,15 @@ CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZX=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_IOV=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_RCAR=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_RCAR=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_ARM64_VA_BITS_48=y
CONFIG_SCHED_MC=y
CONFIG_NUMA=y
@ -80,12 +78,11 @@ CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_CMA=y
CONFIG_SECCOMP=y
CONFIG_XEN=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_XEN=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
CONFIG_CPU_IDLE=y
CONFIG_HIBERNATION=y
CONFIG_ARM_CPUIDLE=y
CONFIG_CPU_FREQ=y
@ -155,8 +152,8 @@ CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_VIRTIO_BLK=y
CONFIG_EEPROM_AT25=m
CONFIG_SRAM=y
CONFIG_EEPROM_AT25=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SAS_ATA=y
@ -168,8 +165,8 @@ CONFIG_AHCI_CEVA=y
CONFIG_AHCI_MVEBU=y
CONFIG_AHCI_XGENE=y
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_RCAR=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_RCAR=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
@ -186,18 +183,17 @@ CONFIG_HNS_ENET=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_MVPP2=y
CONFIG_MVNETA=y
CONFIG_MVPP2=y
CONFIG_SKY2=y
CONFIG_RAVB=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=m
CONFIG_REALTEK_PHY=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MESON_GXL_PHY=m
CONFIG_MICREL_PHY=y
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_REALTEK_PHY=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
@ -230,14 +226,14 @@ CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=11
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
@ -261,14 +257,14 @@ CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_QUP=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
@ -286,33 +282,30 @@ CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_MAX77620=y
CONFIG_POWER_RESET_MSM=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_BCM2835_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_BCM2835_WDT=y
CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_MAX77620=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_REGULATOR=y
CONFIG_RENESAS_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
@ -345,13 +338,12 @@ CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_HDMI=y
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_RCAR_VSP=y
CONFIG_DRM_TEGRA=m
CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_VC4=m
CONFIG_DRM_HISI_KIRIN=m
CONFIG_DRM_MESON=m
CONFIG_FB=y
@ -366,39 +358,37 @@ CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_AK4613=y
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_XHCI_TEGRA=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MSM=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC2=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_MSM_OTG=y
CONFIG_USB_QCOM_8X16_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
@ -406,6 +396,7 @@ CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDHI=y
@ -414,32 +405,31 @@ CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_BCM2835=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=m
CONFIG_MV_XOR_V2=y
CONFIG_PL330_DMA=y
CONFIG_DMA_BCM2835=m
CONFIG_TEGRA20_APB_DMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
@ -452,52 +442,53 @@ CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_MMCC_8996=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_PWM=y
CONFIG_PWM_BCM2835=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_TEGRA=m
CONFIG_PWM_MESON=m
CONFIG_COMMON_RESET_HI6220=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_TEGRA=m
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ACPI=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_PWM_SAMSUNG=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_ACPI=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
@ -511,7 +502,6 @@ CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
@ -539,11 +529,9 @@ CONFIG_MEMTEST=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set

1
arch/arm64/include/asm/atomic_ll_sc.h
View File

@ -264,7 +264,6 @@ __LL_SC_PREFIX(__cmpxchg_case_##name(volatile void *ptr, \
" st" #rel "xr" #sz "\t%w[tmp], %" #w "[new], %[v]\n" \
" cbnz %w[tmp], 1b\n" \
" " #mb "\n" \
" mov %" #w "[oldval], %" #w "[old]\n" \
"2:" \
: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval), \
[v] "+Q" (*(unsigned long *)ptr) \

12
arch/arm64/include/asm/cpufeature.h
View File

@ -115,6 +115,7 @@ struct arm64_cpu_capabilities {
extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS];
extern struct static_key_false arm64_const_caps_ready;
bool this_cpu_has_cap(unsigned int cap);
@ -124,7 +125,7 @@ static inline bool cpu_have_feature(unsigned int num)
}
/* System capability check for constant caps */
static inline bool cpus_have_const_cap(int num)
static inline bool __cpus_have_const_cap(int num)
{
if (num >= ARM64_NCAPS)
return false;
@ -138,6 +139,14 @@ static inline bool cpus_have_cap(unsigned int num)
return test_bit(num, cpu_hwcaps);
}
static inline bool cpus_have_const_cap(int num)
{
if (static_branch_likely(&arm64_const_caps_ready))
return __cpus_have_const_cap(num);
else
return cpus_have_cap(num);
}
static inline void cpus_set_cap(unsigned int num)
{
if (num >= ARM64_NCAPS) {
@ -145,7 +154,6 @@ static inline void cpus_set_cap(unsigned int num)
num, ARM64_NCAPS);
} else {
__set_bit(num, cpu_hwcaps);
static_branch_enable(&cpu_hwcap_keys[num]);
}
}

8
arch/arm64/include/asm/kvm_host.h
View File

@ -24,6 +24,7 @@
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/cpufeature.h>
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
@ -355,9 +356,12 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
unsigned long vector_ptr)
{
/*
* Call initialization code, and switch to the full blown
* HYP code.
* Call initialization code, and switch to the full blown HYP code.
* If the cpucaps haven't been finalized yet, something has gone very
* wrong, and hyp will crash and burn when it uses any
* cpus_have_const_cap() wrapper.
*/
BUG_ON(!static_branch_likely(&arm64_const_caps_ready));
__kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
}

23
arch/arm64/kernel/cpufeature.c
View File

@ -985,8 +985,16 @@ void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
*/
void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
{
for (; caps->matches; caps++)
if (caps->enable && cpus_have_cap(caps->capability))
for (; caps->matches; caps++) {
unsigned int num = caps->capability;
if (!cpus_have_cap(num))
continue;
/* Ensure cpus_have_const_cap(num) works */
static_branch_enable(&cpu_hwcap_keys[num]);
if (caps->enable) {
/*
* Use stop_machine() as it schedules the work allowing
* us to modify PSTATE, instead of on_each_cpu() which
@ -994,6 +1002,8 @@ void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
* we return.
*/
stop_machine(caps->enable, NULL, cpu_online_mask);
}
}
}
/*
@ -1096,6 +1106,14 @@ static void __init setup_feature_capabilities(void)
enable_cpu_capabilities(arm64_features);
}
DEFINE_STATIC_KEY_FALSE(arm64_const_caps_ready);
EXPORT_SYMBOL(arm64_const_caps_ready);
static void __init mark_const_caps_ready(void)
{
static_branch_enable(&arm64_const_caps_ready);
}
/*
* Check if the current CPU has a given feature capability.
* Should be called from non-preemptible context.
@ -1131,6 +1149,7 @@ void __init setup_cpu_features(void)
/* Set the CPU feature capabilies */
setup_feature_capabilities();
enable_errata_workarounds();
mark_const_caps_ready();
setup_elf_hwcaps(arm64_elf_hwcaps);
if (system_supports_32bit_el0())

23
arch/arm64/kernel/perf_event.c
View File

@ -877,15 +877,24 @@ static int armv8pmu_set_event_filter(struct hw_perf_event *event,
if (attr->exclude_idle)
return -EPERM;
if (is_kernel_in_hyp_mode() &&
attr->exclude_kernel != attr->exclude_hv)
return -EINVAL;
/*
* If we're running in hyp mode, then we *are* the hypervisor.
* Therefore we ignore exclude_hv in this configuration, since
* there's no hypervisor to sample anyway. This is consistent
* with other architectures (x86 and Power).
*/
if (is_kernel_in_hyp_mode()) {
if (!attr->exclude_kernel)
config_base |= ARMV8_PMU_INCLUDE_EL2;
} else {
if (attr->exclude_kernel)
config_base |= ARMV8_PMU_EXCLUDE_EL1;
if (!attr->exclude_hv)
config_base |= ARMV8_PMU_INCLUDE_EL2;
}
if (attr->exclude_user)
config_base |= ARMV8_PMU_EXCLUDE_EL0;
if (!is_kernel_in_hyp_mode() && attr->exclude_kernel)
config_base |= ARMV8_PMU_EXCLUDE_EL1;
if (!attr->exclude_hv)
config_base |= ARMV8_PMU_INCLUDE_EL2;
/*
* Install the filter into config_base as this is used to

2
arch/arm64/kvm/hyp/Makefile
View File

@ -2,6 +2,8 @@
# Makefile for Kernel-based Virtual Machine module, HYP part
#
ccflags-y += -fno-stack-protector
KVM=../../../../virt/kvm
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o

1
arch/cris/boot/dts/include/dt-bindings
View File

@ -1 +0,0 @@
../../../../../include/dt-bindings

1
arch/metag/boot/dts/include/dt-bindings
View File

@ -1 +0,0 @@
../../../../../include/dt-bindings

1
arch/mips/boot/dts/include/dt-bindings
View File

@ -1 +0,0 @@
../../../../../include/dt-bindings

1
arch/powerpc/boot/dts/include/dt-bindings
View File

@ -1 +0,0 @@
../../../../../include/dt-bindings

4
arch/powerpc/include/asm/module.h
View File

@ -14,6 +14,10 @@
#include <asm-generic/module.h>
#ifdef CC_USING_MPROFILE_KERNEL
#define MODULE_ARCH_VERMAGIC "mprofile-kernel"
#endif
#ifndef __powerpc64__
/*
* Thanks to Paul M for explaining this.

12
arch/powerpc/include/asm/page.h
View File

@ -132,7 +132,19 @@ extern long long virt_phys_offset;
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#ifdef CONFIG_PPC_BOOK3S_64
/*
* On hash the vmalloc and other regions alias to the kernel region when passed
* through __pa(), which virt_to_pfn() uses. That means virt_addr_valid() can
* return true for some vmalloc addresses, which is incorrect. So explicitly
* check that the address is in the kernel region.
*/
#define virt_addr_valid(kaddr) (REGION_ID(kaddr) == KERNEL_REGION_ID && \
pfn_valid(virt_to_pfn(kaddr)))
#else
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
#endif
/*
* On Book-E parts we need __va to parse the device tree and we can't

2
arch/powerpc/kernel/idle_book3s.S
View File

@ -416,7 +416,7 @@ power9_dd1_recover_paca:
* which needs to be restored from the stack.
*/
li r3, 1
stb r0,PACA_NAPSTATELOST(r13)
stb r3,PACA_NAPSTATELOST(r13)
blr
/*

3
arch/powerpc/kernel/kprobes.c
View File

@ -305,16 +305,17 @@ int kprobe_handler(struct pt_regs *regs)
save_previous_kprobe(kcb);
set_current_kprobe(p, regs, kcb);
kprobes_inc_nmissed_count(p);
prepare_singlestep(p, regs);
kcb->kprobe_status = KPROBE_REENTER;
if (p->ainsn.boostable >= 0) {
ret = try_to_emulate(p, regs);
if (ret > 0) {
restore_previous_kprobe(kcb);
preempt_enable_no_resched();
return 1;
}
}
prepare_singlestep(p, regs);
return 1;
} else {
if (*addr != BREAKPOINT_INSTRUCTION) {

19
arch/powerpc/kernel/process.c
View File

@ -864,6 +864,25 @@ static void tm_reclaim_thread(struct thread_struct *thr,
if (!MSR_TM_SUSPENDED(mfmsr()))
return;
/*
* If we are in a transaction and FP is off then we can't have
* used FP inside that transaction. Hence the checkpointed
* state is the same as the live state. We need to copy the
* live state to the checkpointed state so that when the
* transaction is restored, the checkpointed state is correct
* and the aborted transaction sees the correct state. We use
* ckpt_regs.msr here as that's what tm_reclaim will use to
* determine if it's going to write the checkpointed state or
* not. So either this will write the checkpointed registers,
* or reclaim will. Similarly for VMX.
*/
if ((thr->ckpt_regs.msr & MSR_FP) == 0)
memcpy(&thr->ckfp_state, &thr->fp_state,
sizeof(struct thread_fp_state));
if ((thr->ckpt_regs.msr & MSR_VEC) == 0)
memcpy(&thr->ckvr_state, &thr->vr_state,
sizeof(struct thread_vr_state));
giveup_all(container_of(thr, struct task_struct, thread));
tm_reclaim(thr, thr->ckpt_regs.msr, cause);

2
arch/powerpc/kvm/Kconfig
View File

@ -67,7 +67,7 @@ config KVM_BOOK3S_64
select KVM_BOOK3S_64_HANDLER
select KVM
select KVM_BOOK3S_PR_POSSIBLE if !KVM_BOOK3S_HV_POSSIBLE
select SPAPR_TCE_IOMMU if IOMMU_SUPPORT
select SPAPR_TCE_IOMMU if IOMMU_SUPPORT && (PPC_SERIES || PPC_POWERNV)
---help---
Support running unmodified book3s_64 and book3s_32 guest kernels
in virtual machines on book3s_64 host processors.

4
arch/powerpc/kvm/Makefile
View File

@ -46,7 +46,7 @@ kvm-e500mc-objs := \
e500_emulate.o
kvm-objs-$(CONFIG_KVM_E500MC) := $(kvm-e500mc-objs)
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) := \
kvm-book3s_64-builtin-objs-$(CONFIG_SPAPR_TCE_IOMMU) := \
book3s_64_vio_hv.o
kvm-pr-y := \
@ -90,11 +90,11 @@ kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \
book3s_xics.o
kvm-book3s_64-objs-$(CONFIG_KVM_XIVE) += book3s_xive.o
kvm-book3s_64-objs-$(CONFIG_SPAPR_TCE_IOMMU) += book3s_64_vio.o
kvm-book3s_64-module-objs := \
$(common-objs-y) \
book3s.o \
book3s_64_vio.o \
book3s_rtas.o \
$(kvm-book3s_64-objs-y)

13
arch/powerpc/kvm/book3s_64_vio_hv.c
View File

@ -301,6 +301,10 @@ long kvmppc_rm_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
/* udbg_printf("H_PUT_TCE(): liobn=0x%lx ioba=0x%lx, tce=0x%lx\n", */
/* liobn, ioba, tce); */
/* For radix, we might be in virtual mode, so punt */
if (kvm_is_radix(vcpu->kvm))
return H_TOO_HARD;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
@ -381,6 +385,10 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
bool prereg = false;
struct kvmppc_spapr_tce_iommu_table *stit;
/* For radix, we might be in virtual mode, so punt */
if (kvm_is_radix(vcpu->kvm))
return H_TOO_HARD;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
@ -491,6 +499,10 @@ long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu,
long i, ret;
struct kvmppc_spapr_tce_iommu_table *stit;
/* For radix, we might be in virtual mode, so punt */
if (kvm_is_radix(vcpu->kvm))
return H_TOO_HARD;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
@ -527,6 +539,7 @@ long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu,
return H_SUCCESS;
}
/* This can be called in either virtual mode or real mode */
long kvmppc_h_get_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
unsigned long ioba)
{

9
arch/powerpc/kvm/book3s_hv_builtin.c
View File

@ -207,7 +207,14 @@ EXPORT_SYMBOL_GPL(kvmppc_hwrng_present);
long kvmppc_h_random(struct kvm_vcpu *vcpu)
{
if (powernv_get_random_real_mode(&vcpu->arch.gpr[4]))
int r;
/* Only need to do the expensive mfmsr() on radix */
if (kvm_is_radix(vcpu->kvm) && (mfmsr() & MSR_IR))
r = powernv_get_random_long(&vcpu->arch.gpr[4]);
else
r = powernv_get_random_real_mode(&vcpu->arch.gpr[4]);
if (r)
return H_SUCCESS;
return H_HARDWARE;

80
arch/powerpc/kvm/book3s_pr_papr.c
View File

@ -50,7 +50,9 @@ static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu)
pteg_addr = get_pteg_addr(vcpu, pte_index);
mutex_lock(&vcpu->kvm->arch.hpt_mutex);
copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
ret = H_FUNCTION;
if (copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)))
goto done;
hpte = pteg;
ret = H_PTEG_FULL;
@ -71,7 +73,9 @@ static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu)
hpte[0] = cpu_to_be64(kvmppc_get_gpr(vcpu, 6));
hpte[1] = cpu_to_be64(kvmppc_get_gpr(vcpu, 7));
pteg_addr += i * HPTE_SIZE;
copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
ret = H_FUNCTION;
if (copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE))
goto done;
kvmppc_set_gpr(vcpu, 4, pte_index | i);
ret = H_SUCCESS;
@ -93,7 +97,9 @@ static int kvmppc_h_pr_remove(struct kvm_vcpu *vcpu)
pteg = get_pteg_addr(vcpu, pte_index);
mutex_lock(&vcpu->kvm->arch.hpt_mutex);
copy_from_user(pte, (void __user *)pteg, sizeof(pte));
ret = H_FUNCTION;
if (copy_from_user(pte, (void __user *)pteg, sizeof(pte)))
goto done;
pte[0] = be64_to_cpu((__force __be64)pte[0]);
pte[1] = be64_to_cpu((__force __be64)pte[1]);
@ -103,7 +109,9 @@ static int kvmppc_h_pr_remove(struct kvm_vcpu *vcpu)
((flags & H_ANDCOND) && (pte[0] & avpn) != 0))
goto done;
copy_to_user((void __user *)pteg, &v, sizeof(v));
ret = H_FUNCTION;
if (copy_to_user((void __user *)pteg, &v, sizeof(v)))
goto done;
rb = compute_tlbie_rb(pte[0], pte[1], pte_index);
vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
@ -171,7 +179,10 @@ static int kvmppc_h_pr_bulk_remove(struct kvm_vcpu *vcpu)
}
pteg = get_pteg_addr(vcpu, tsh & H_BULK_REMOVE_PTEX);
copy_from_user(pte, (void __user *)pteg, sizeof(pte));
if (copy_from_user(pte, (void __user *)pteg, sizeof(pte))) {
ret = H_FUNCTION;
break;
}
pte[0] = be64_to_cpu((__force __be64)pte[0]);
pte[1] = be64_to_cpu((__force __be64)pte[1]);
@ -184,7 +195,10 @@ static int kvmppc_h_pr_bulk_remove(struct kvm_vcpu *vcpu)
tsh |= H_BULK_REMOVE_NOT_FOUND;
} else {
/* Splat the pteg in (userland) hpt */
copy_to_user((void __user *)pteg, &v, sizeof(v));
if (copy_to_user((void __user *)pteg, &v, sizeof(v))) {
ret = H_FUNCTION;
break;
}
rb = compute_tlbie_rb(pte[0], pte[1],
tsh & H_BULK_REMOVE_PTEX);
@ -211,7 +225,9 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu)
pteg = get_pteg_addr(vcpu, pte_index);
mutex_lock(&vcpu->kvm->arch.hpt_mutex);
copy_from_user(pte, (void __user *)pteg, sizeof(pte));
ret = H_FUNCTION;
if (copy_from_user(pte, (void __user *)pteg, sizeof(pte)))
goto done;
pte[0] = be64_to_cpu((__force __be64)pte[0]);
pte[1] = be64_to_cpu((__force __be64)pte[1]);
@ -234,7 +250,9 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu)
vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
pte[0] = (__force u64)cpu_to_be64(pte[0]);
pte[1] = (__force u64)cpu_to_be64(pte[1]);
copy_to_user((void __user *)pteg, pte, sizeof(pte));
ret = H_FUNCTION;
if (copy_to_user((void __user *)pteg, pte, sizeof(pte)))
goto done;
ret = H_SUCCESS;
done:
@ -244,20 +262,6 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu)
return EMULATE_DONE;
}
static int kvmppc_h_pr_put_tce(struct kvm_vcpu *vcpu)
{
unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
unsigned long ioba = kvmppc_get_gpr(vcpu, 5);
unsigned long tce = kvmppc_get_gpr(vcpu, 6);
long rc;
rc = kvmppc_h_put_tce(vcpu, liobn, ioba, tce);
if (rc == H_TOO_HARD)
return EMULATE_FAIL;
kvmppc_set_gpr(vcpu, 3, rc);
return EMULATE_DONE;
}
static int kvmppc_h_pr_logical_ci_load(struct kvm_vcpu *vcpu)
{
long rc;
@ -280,6 +284,21 @@ static int kvmppc_h_pr_logical_ci_store(struct kvm_vcpu *vcpu)
return EMULATE_DONE;
}
#ifdef CONFIG_SPAPR_TCE_IOMMU
static int kvmppc_h_pr_put_tce(struct kvm_vcpu *vcpu)
{
unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
unsigned long ioba = kvmppc_get_gpr(vcpu, 5);
unsigned long tce = kvmppc_get_gpr(vcpu, 6);
long rc;
rc = kvmppc_h_put_tce(vcpu, liobn, ioba, tce);
if (rc == H_TOO_HARD)
return EMULATE_FAIL;
kvmppc_set_gpr(vcpu, 3, rc);
return EMULATE_DONE;
}
static int kvmppc_h_pr_put_tce_indirect(struct kvm_vcpu *vcpu)
{
unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
@ -311,6 +330,23 @@ static int kvmppc_h_pr_stuff_tce(struct kvm_vcpu *vcpu)
return EMULATE_DONE;
}
#else /* CONFIG_SPAPR_TCE_IOMMU */
static int kvmppc_h_pr_put_tce(struct kvm_vcpu *vcpu)
{
return EMULATE_FAIL;
}
static int kvmppc_h_pr_put_tce_indirect(struct kvm_vcpu *vcpu)
{
return EMULATE_FAIL;
}
static int kvmppc_h_pr_stuff_tce(struct kvm_vcpu *vcpu)
{
return EMULATE_FAIL;
}
#endif /* CONFIG_SPAPR_TCE_IOMMU */
static int kvmppc_h_pr_xics_hcall(struct kvm_vcpu *vcpu, u32 cmd)
{
long rc = kvmppc_xics_hcall(vcpu, cmd);

4
arch/powerpc/kvm/powerpc.c
View File

@ -1749,7 +1749,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
r = kvm_vm_ioctl_enable_cap(kvm, &cap);
break;
}
#ifdef CONFIG_PPC_BOOK3S_64
#ifdef CONFIG_SPAPR_TCE_IOMMU
case KVM_CREATE_SPAPR_TCE_64: {
struct kvm_create_spapr_tce_64 create_tce_64;
@ -1780,6 +1780,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
r = kvm_vm_ioctl_create_spapr_tce(kvm, &create_tce_64);
goto out;
}
#endif
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_PPC_GET_SMMU_INFO: {
struct kvm_ppc_smmu_info info;
struct kvm *kvm = filp->private_data;

7
arch/powerpc/mm/dump_linuxpagetables.c
View File

@ -16,6 +16,7 @@
*/
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/hugetlb.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/sched.h>
@ -391,7 +392,7 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
for (i = 0; i < PTRS_PER_PMD; i++, pmd++) {
addr = start + i * PMD_SIZE;
if (!pmd_none(*pmd))
if (!pmd_none(*pmd) && !pmd_huge(*pmd))
/* pmd exists */
walk_pte(st, pmd, addr);
else
@ -407,7 +408,7 @@ static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
for (i = 0; i < PTRS_PER_PUD; i++, pud++) {
addr = start + i * PUD_SIZE;
if (!pud_none(*pud))
if (!pud_none(*pud) && !pud_huge(*pud))
/* pud exists */
walk_pmd(st, pud, addr);
else
@ -427,7 +428,7 @@ static void walk_pagetables(struct pg_state *st)
*/
for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
addr = KERN_VIRT_START + i * PGDIR_SIZE;
if (!pgd_none(*pgd))
if (!pgd_none(*pgd) && !pgd_huge(*pgd))
/* pgd exists */
walk_pud(st, pgd, addr);
else

2
arch/x86/include/asm/kvm_host.h
View File

@ -43,7 +43,7 @@
#define KVM_PRIVATE_MEM_SLOTS 3
#define KVM_MEM_SLOTS_NUM (KVM_USER_MEM_SLOTS + KVM_PRIVATE_MEM_SLOTS)
#define KVM_HALT_POLL_NS_DEFAULT 400000
#define KVM_HALT_POLL_NS_DEFAULT 200000
#define KVM_IRQCHIP_NUM_PINS KVM_IOAPIC_NUM_PINS

11
arch/x86/include/asm/uaccess.h
View File

@ -319,10 +319,10 @@ do { \
#define __get_user_asm_u64(x, ptr, retval, errret) \
({ \
__typeof__(ptr) __ptr = (ptr); \
asm volatile(ASM_STAC "\n" \
asm volatile("\n" \
"1: movl %2,%%eax\n" \
"2: movl %3,%%edx\n" \
"3: " ASM_CLAC "\n" \
"3:\n" \
".section .fixup,\"ax\"\n" \
"4: mov %4,%0\n" \
" xorl %%eax,%%eax\n" \
@ -331,7 +331,7 @@ do { \
".previous\n" \
_ASM_EXTABLE(1b, 4b) \
_ASM_EXTABLE(2b, 4b) \
: "=r" (retval), "=A"(x) \
: "=r" (retval), "=&A"(x) \
: "m" (__m(__ptr)), "m" __m(((u32 *)(__ptr)) + 1), \
"i" (errret), "0" (retval)); \
})
@ -703,14 +703,15 @@ extern struct movsl_mask {
#define unsafe_put_user(x, ptr, err_label) \
do { \
int __pu_err; \
__put_user_size((x), (ptr), sizeof(*(ptr)), __pu_err, -EFAULT); \
__typeof__(*(ptr)) __pu_val = (x); \
__put_user_size(__pu_val, (ptr), sizeof(*(ptr)), __pu_err, -EFAULT); \
if (unlikely(__pu_err)) goto err_label; \
} while (0)
#define unsafe_get_user(x, ptr, err_label) \
do { \
int __gu_err; \
unsigned long __gu_val; \
__inttype(*(ptr)) __gu_val; \
__get_user_size(__gu_val, (ptr), sizeof(*(ptr)), __gu_err, -EFAULT); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
if (unlikely(__gu_err)) goto err_label; \

1
arch/x86/kernel/fpu/init.c
View File

@ -90,6 +90,7 @@ static void fpu__init_system_early_generic(struct cpuinfo_x86 *c)
* Boot time FPU feature detection code:
*/
unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
EXPORT_SYMBOL_GPL(mxcsr_feature_mask);
static void __init fpu__init_system_mxcsr(void)
{

2
arch/x86/kvm/emulate.c
View File

@ -4173,7 +4173,7 @@ static int check_dr_write(struct x86_emulate_ctxt *ctxt)
static int check_svme(struct x86_emulate_ctxt *ctxt)
{
u64 efer;
u64 efer = 0;
ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);

35
arch/x86/kvm/paging_tmpl.h
View File

@ -283,11 +283,13 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker,
pt_element_t pte;
pt_element_t __user *uninitialized_var(ptep_user);
gfn_t table_gfn;
unsigned index, pt_access, pte_access, accessed_dirty, pte_pkey;
u64 pt_access, pte_access;
unsigned index, accessed_dirty, pte_pkey;
unsigned nested_access;
gpa_t pte_gpa;
bool have_ad;
int offset;
u64 walk_nx_mask = 0;
const int write_fault = access & PFERR_WRITE_MASK;
const int user_fault = access & PFERR_USER_MASK;
const int fetch_fault = access & PFERR_FETCH_MASK;
@ -302,6 +304,7 @@ retry_walk:
have_ad = PT_HAVE_ACCESSED_DIRTY(mmu);
#if PTTYPE == 64
walk_nx_mask = 1ULL << PT64_NX_SHIFT;
if (walker->level == PT32E_ROOT_LEVEL) {
pte = mmu->get_pdptr(vcpu, (addr >> 30) & 3);
trace_kvm_mmu_paging_element(pte, walker->level);
@ -313,8 +316,6 @@ retry_walk:
walker->max_level = walker->level;
ASSERT(!(is_long_mode(vcpu) && !is_pae(vcpu)));
accessed_dirty = have_ad ? PT_GUEST_ACCESSED_MASK : 0;
/*
* FIXME: on Intel processors, loads of the PDPTE registers for PAE paging
* by the MOV to CR instruction are treated as reads and do not cause the
@ -322,14 +323,14 @@ retry_walk:
*/
nested_access = (have_ad ? PFERR_WRITE_MASK : 0) | PFERR_USER_MASK;
pt_access = pte_access = ACC_ALL;
pte_access = ~0;
++walker->level;
do {
gfn_t real_gfn;
unsigned long host_addr;
pt_access &= pte_access;
pt_access = pte_access;
--walker->level;
index = PT_INDEX(addr, walker->level);
@ -371,6 +372,12 @@ retry_walk:
trace_kvm_mmu_paging_element(pte, walker->level);
/*
* Inverting the NX it lets us AND it like other
* permission bits.
*/
pte_access = pt_access & (pte ^ walk_nx_mask);
if (unlikely(!FNAME(is_present_gpte)(pte)))
goto error;
@ -379,14 +386,16 @@ retry_walk:
goto error;
}
accessed_dirty &= pte;
pte_access = pt_access & FNAME(gpte_access)(vcpu, pte);
walker->ptes[walker->level - 1] = pte;
} while (!is_last_gpte(mmu, walker->level, pte));
pte_pkey = FNAME(gpte_pkeys)(vcpu, pte);
errcode = permission_fault(vcpu, mmu, pte_access, pte_pkey, access);
accessed_dirty = have_ad ? pte_access & PT_GUEST_ACCESSED_MASK : 0;
/* Convert to ACC_*_MASK flags for struct guest_walker. */
walker->pt_access = FNAME(gpte_access)(vcpu, pt_access ^ walk_nx_mask);
walker->pte_access = FNAME(gpte_access)(vcpu, pte_access ^ walk_nx_mask);
errcode = permission_fault(vcpu, mmu, walker->pte_access, pte_pkey, access);
if (unlikely(errcode))
goto error;
@ -403,7 +412,7 @@ retry_walk:
walker->gfn = real_gpa >> PAGE_SHIFT;
if (!write_fault)
FNAME(protect_clean_gpte)(mmu, &pte_access, pte);
FNAME(protect_clean_gpte)(mmu, &walker->pte_access, pte);
else
/*
* On a write fault, fold the dirty bit into accessed_dirty.
@ -421,10 +430,8 @@ retry_walk:
goto retry_walk;
}
walker->pt_access = pt_access;
walker->pte_access = pte_access;
pgprintk("%s: pte %llx pte_access %x pt_access %x\n",
__func__, (u64)pte, pte_access, pt_access);
__func__, (u64)pte, walker->pte_access, walker->pt_access);
return 1;
error:
@ -452,7 +459,7 @@ error:
*/
if (!(errcode & PFERR_RSVD_MASK)) {
vcpu->arch.exit_qualification &= 0x187;
vcpu->arch.exit_qualification |= ((pt_access & pte) & 0x7) << 3;
vcpu->arch.exit_qualification |= (pte_access & 0x7) << 3;
}
#endif
walker->fault.address = addr;

2
arch/x86/kvm/pmu_intel.c
View File

@ -294,7 +294,7 @@ static void intel_pmu_refresh(struct kvm_vcpu *vcpu)
((u64)1 << edx.split.bit_width_fixed) - 1;
}
pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
pmu->global_ctrl = ((1ull << pmu->nr_arch_gp_counters) - 1) |
(((1ull << pmu->nr_arch_fixed_counters) - 1) << INTEL_PMC_IDX_FIXED);
pmu->global_ctrl_mask = ~pmu->global_ctrl;

3
arch/x86/kvm/svm.c
View File

@ -1272,7 +1272,8 @@ static void init_vmcb(struct vcpu_svm *svm)
}
static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu, int index)
static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
unsigned int index)
{
u64 *avic_physical_id_table;
struct kvm_arch *vm_data = &vcpu->kvm->arch;

4
arch/x86/kvm/vmx.c
View File

@ -6504,7 +6504,7 @@ static __init int hardware_setup(void)
enable_ept_ad_bits = 0;
}
if (!cpu_has_vmx_ept_ad_bits())
if (!cpu_has_vmx_ept_ad_bits() || !enable_ept)
enable_ept_ad_bits = 0;
if (!cpu_has_vmx_unrestricted_guest())
@ -11213,7 +11213,7 @@ static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu)
if (!nested_cpu_has_pml(vmcs12))
return 0;
if (vmcs12->guest_pml_index > PML_ENTITY_NUM) {
if (vmcs12->guest_pml_index >= PML_ENTITY_NUM) {
vmx->nested.pml_full = true;
return 1;
}

45
arch/x86/kvm/x86.c
View File

@ -1763,6 +1763,7 @@ u64 get_kvmclock_ns(struct kvm *kvm)
{
struct kvm_arch *ka = &kvm->arch;
struct pvclock_vcpu_time_info hv_clock;
u64 ret;
spin_lock(&ka->pvclock_gtod_sync_lock);
if (!ka->use_master_clock) {
@ -1774,10 +1775,17 @@ u64 get_kvmclock_ns(struct kvm *kvm)
hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
spin_unlock(&ka->pvclock_gtod_sync_lock);
/* both __this_cpu_read() and rdtsc() should be on the same cpu */
get_cpu();
kvm_get_time_scale(NSEC_PER_SEC, __this_cpu_read(cpu_tsc_khz) * 1000LL,
&hv_clock.tsc_shift,
&hv_clock.tsc_to_system_mul);
return __pvclock_read_cycles(&hv_clock, rdtsc());
ret = __pvclock_read_cycles(&hv_clock, rdtsc());
put_cpu();
return ret;
}
static void kvm_setup_pvclock_page(struct kvm_vcpu *v)
@ -3288,11 +3296,14 @@ static void kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu,
}
}
#define XSAVE_MXCSR_OFFSET 24
static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
struct kvm_xsave *guest_xsave)
{
u64 xstate_bv =
*(u64 *)&guest_xsave->region[XSAVE_HDR_OFFSET / sizeof(u32)];
u32 mxcsr = *(u32 *)&guest_xsave->region[XSAVE_MXCSR_OFFSET / sizeof(u32)];
if (boot_cpu_has(X86_FEATURE_XSAVE)) {
/*
@ -3300,11 +3311,13 @@ static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
* CPUID leaf 0xD, index 0, EDX:EAX. This is for compatibility
* with old userspace.
*/
if (xstate_bv & ~kvm_supported_xcr0())
if (xstate_bv & ~kvm_supported_xcr0() ||
mxcsr & ~mxcsr_feature_mask)
return -EINVAL;
load_xsave(vcpu, (u8 *)guest_xsave->region);
} else {
if (xstate_bv & ~XFEATURE_MASK_FPSSE)
if (xstate_bv & ~XFEATURE_MASK_FPSSE ||
mxcsr & ~mxcsr_feature_mask)
return -EINVAL;
memcpy(&vcpu->arch.guest_fpu.state.fxsave,
guest_xsave->region, sizeof(struct fxregs_state));
@ -4818,16 +4831,20 @@ emul_write:
static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
{
/* TODO: String I/O for in kernel device */
int r;
int r = 0, i;
if (vcpu->arch.pio.in)
r = kvm_io_bus_read(vcpu, KVM_PIO_BUS, vcpu->arch.pio.port,
vcpu->arch.pio.size, pd);
else
r = kvm_io_bus_write(vcpu, KVM_PIO_BUS,
vcpu->arch.pio.port, vcpu->arch.pio.size,
pd);
for (i = 0; i < vcpu->arch.pio.count; i++) {
if (vcpu->arch.pio.in)
r = kvm_io_bus_read(vcpu, KVM_PIO_BUS, vcpu->arch.pio.port,
vcpu->arch.pio.size, pd);
else
r = kvm_io_bus_write(vcpu, KVM_PIO_BUS,
vcpu->arch.pio.port, vcpu->arch.pio.size,
pd);
if (r)
break;
pd += vcpu->arch.pio.size;
}
return r;
}
@ -4865,6 +4882,8 @@ static int emulator_pio_in_emulated(struct x86_emulate_ctxt *ctxt,
if (vcpu->arch.pio.count)
goto data_avail;
memset(vcpu->arch.pio_data, 0, size * count);
ret = emulator_pio_in_out(vcpu, size, port, val, count, true);
if (ret) {
data_avail:
@ -5048,6 +5067,8 @@ static bool emulator_get_segment(struct x86_emulate_ctxt *ctxt, u16 *selector,
if (var.unusable) {
memset(desc, 0, sizeof(*desc));
if (base3)
*base3 = 0;
return false;
}

15
arch/x86/xen/enlighten_pv.c
View File

@ -142,9 +142,7 @@ static void __init xen_banner(void)
struct xen_extraversion extra;
HYPERVISOR_xen_version(XENVER_extraversion, &extra);
pr_info("Booting paravirtualized kernel %son %s\n",
xen_feature(XENFEAT_auto_translated_physmap) ?
"with PVH extensions " : "", pv_info.name);
pr_info("Booting paravirtualized kernel on %s\n", pv_info.name);
printk(KERN_INFO "Xen version: %d.%d%s%s\n",
version >> 16, version & 0xffff, extra.extraversion,
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
@ -957,15 +955,10 @@ static void xen_write_msr(unsigned int msr, unsigned low, unsigned high)
void xen_setup_shared_info(void)
{
if (!xen_feature(XENFEAT_auto_translated_physmap)) {
set_fixmap(FIX_PARAVIRT_BOOTMAP,
xen_start_info->shared_info);
set_fixmap(FIX_PARAVIRT_BOOTMAP, xen_start_info->shared_info);
HYPERVISOR_shared_info =
(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
} else
HYPERVISOR_shared_info =
(struct shared_info *)__va(xen_start_info->shared_info);
HYPERVISOR_shared_info =
(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
#ifndef CONFIG_SMP
/* In UP this is as good a place as any to set up shared info */

2
arch/x86/xen/mmu.c
View File

@ -42,7 +42,7 @@ xmaddr_t arbitrary_virt_to_machine(void *vaddr)
}
EXPORT_SYMBOL_GPL(arbitrary_virt_to_machine);
void xen_flush_tlb_all(void)
static void xen_flush_tlb_all(void)
{
struct mmuext_op *op;
struct multicall_space mcs;

98
arch/x86/xen/mmu_pv.c
View File

@ -355,10 +355,8 @@ static pteval_t pte_pfn_to_mfn(pteval_t val)
pteval_t flags = val & PTE_FLAGS_MASK;
unsigned long mfn;
if (!xen_feature(XENFEAT_auto_translated_physmap))
mfn = __pfn_to_mfn(pfn);
else
mfn = pfn;
mfn = __pfn_to_mfn(pfn);
/*
* If there's no mfn for the pfn, then just create an
* empty non-present pte. Unfortunately this loses
@ -647,9 +645,6 @@ static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
limit--;
BUG_ON(limit >= FIXADDR_TOP);
if (xen_feature(XENFEAT_auto_translated_physmap))
return 0;
/*
* 64-bit has a great big hole in the middle of the address
* space, which contains the Xen mappings. On 32-bit these
@ -1289,9 +1284,6 @@ static void __init xen_pagetable_cleanhighmap(void)
static void __init xen_pagetable_p2m_setup(void)
{
if (xen_feature(XENFEAT_auto_translated_physmap))
return;
xen_vmalloc_p2m_tree();
#ifdef CONFIG_X86_64
@ -1314,8 +1306,7 @@ static void __init xen_pagetable_init(void)
xen_build_mfn_list_list();
/* Remap memory freed due to conflicts with E820 map */
if (!xen_feature(XENFEAT_auto_translated_physmap))
xen_remap_memory();
xen_remap_memory();
xen_setup_shared_info();
}
@ -1925,21 +1916,20 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
/* Zap identity mapping */
init_level4_pgt[0] = __pgd(0);
if (!xen_feature(XENFEAT_auto_translated_physmap)) {
/* Pre-constructed entries are in pfn, so convert to mfn */
/* L4[272] -> level3_ident_pgt
* L4[511] -> level3_kernel_pgt */
convert_pfn_mfn(init_level4_pgt);
/* Pre-constructed entries are in pfn, so convert to mfn */
/* L4[272] -> level3_ident_pgt */
/* L4[511] -> level3_kernel_pgt */
convert_pfn_mfn(init_level4_pgt);
/* L3_i[0] -> level2_ident_pgt */
convert_pfn_mfn(level3_ident_pgt);
/* L3_k[510] -> level2_kernel_pgt
* L3_k[511] -> level2_fixmap_pgt */
convert_pfn_mfn(level3_kernel_pgt);
/* L3_i[0] -> level2_ident_pgt */
convert_pfn_mfn(level3_ident_pgt);
/* L3_k[510] -> level2_kernel_pgt */
/* L3_k[511] -> level2_fixmap_pgt */
convert_pfn_mfn(level3_kernel_pgt);
/* L3_k[511][506] -> level1_fixmap_pgt */
convert_pfn_mfn(level2_fixmap_pgt);
/* L3_k[511][506] -> level1_fixmap_pgt */
convert_pfn_mfn(level2_fixmap_pgt);
}
/* We get [511][511] and have Xen's version of level2_kernel_pgt */
l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
@ -1962,34 +1952,30 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
if (i && i < pgd_index(__START_KERNEL_map))
init_level4_pgt[i] = ((pgd_t *)xen_start_info->pt_base)[i];
if (!xen_feature(XENFEAT_auto_translated_physmap)) {
/* Make pagetable pieces RO */
set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO);
set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
set_page_prot(level1_fixmap_pgt, PAGE_KERNEL_RO);
/* Make pagetable pieces RO */
set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO);
set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
set_page_prot(level1_fixmap_pgt, PAGE_KERNEL_RO);
/* Pin down new L4 */
pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
PFN_DOWN(__pa_symbol(init_level4_pgt)));
/* Pin down new L4 */
pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
PFN_DOWN(__pa_symbol(init_level4_pgt)));
/* Unpin Xen-provided one */
pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
/* Unpin Xen-provided one */
pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
/*
* At this stage there can be no user pgd, and no page
* structure to attach it to, so make sure we just set kernel
* pgd.
*/
xen_mc_batch();
__xen_write_cr3(true, __pa(init_level4_pgt));
xen_mc_issue(PARAVIRT_LAZY_CPU);
} else
native_write_cr3(__pa(init_level4_pgt));
/*
* At this stage there can be no user pgd, and no page structure to
* attach it to, so make sure we just set kernel pgd.
*/
xen_mc_batch();
__xen_write_cr3(true, __pa(init_level4_pgt));
xen_mc_issue(PARAVIRT_LAZY_CPU);
/* We can't that easily rip out L3 and L2, as the Xen pagetables are
* set out this way: [L4], [L1], [L2], [L3], [L1], [L1] ... for
@ -2403,9 +2389,6 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot)
static void __init xen_post_allocator_init(void)
{
if (xen_feature(XENFEAT_auto_translated_physmap))
return;
pv_mmu_ops.set_pte = xen_set_pte;
pv_mmu_ops.set_pmd = xen_set_pmd;
pv_mmu_ops.set_pud = xen_set_pud;
@ -2511,9 +2494,6 @@ void __init xen_init_mmu_ops(void)
{
x86_init.paging.pagetable_init = xen_pagetable_init;
if (xen_feature(XENFEAT_auto_translated_physmap))
return;
pv_mmu_ops = xen_mmu_ops;
memset(dummy_mapping, 0xff, PAGE_SIZE);
@ -2650,9 +2630,6 @@ int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
* this function are redundant and can be ignored.
*/
if (xen_feature(XENFEAT_auto_translated_physmap))
return 0;
if (unlikely(order > MAX_CONTIG_ORDER))
return -ENOMEM;
@ -2689,9 +2666,6 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order)
int success;
unsigned long vstart;
if (xen_feature(XENFEAT_auto_translated_physmap))
return;
if (unlikely(order > MAX_CONTIG_ORDER))
return;

9
drivers/acpi/button.c
View File

@ -57,6 +57,7 @@
#define ACPI_BUTTON_LID_INIT_IGNORE 0x00
#define ACPI_BUTTON_LID_INIT_OPEN 0x01
#define ACPI_BUTTON_LID_INIT_METHOD 0x02
#define _COMPONENT ACPI_BUTTON_COMPONENT
ACPI_MODULE_NAME("button");
@ -376,6 +377,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
case ACPI_BUTTON_LID_INIT_OPEN:
(void)acpi_lid_notify_state(device, 1);
break;
case ACPI_BUTTON_LID_INIT_METHOD:
(void)acpi_lid_update_state(device);
break;
case ACPI_BUTTON_LID_INIT_IGNORE:
default:
break;
@ -560,6 +564,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
if (!strncmp(val, "open", sizeof("open") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
pr_info("Notify initial lid state as open\n");
} else if (!strncmp(val, "method", sizeof("method") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
pr_info("Notify initial lid state with _LID return value\n");
} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
pr_info("Do not notify initial lid state\n");
@ -573,6 +580,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
switch (lid_init_state) {
case ACPI_BUTTON_LID_INIT_OPEN:
return sprintf(buffer, "open");
case ACPI_BUTTON_LID_INIT_METHOD:
return sprintf(buffer, "method");
case ACPI_BUTTON_LID_INIT_IGNORE:
return sprintf(buffer, "ignore");
default:

11
drivers/base/power/wakeup.c
View File

@ -512,13 +512,12 @@ static bool wakeup_source_not_registered(struct wakeup_source *ws)
/**
* wakup_source_activate - Mark given wakeup source as active.
* @ws: Wakeup source to handle.
* @hard: If set, abort suspends in progress and wake up from suspend-to-idle.
*
* Update the @ws' statistics and, if @ws has just been activated, notify the PM
* core of the event by incrementing the counter of of wakeup events being
* processed.
*/
static void wakeup_source_activate(struct wakeup_source *ws, bool hard)
static void wakeup_source_activate(struct wakeup_source *ws)
{
unsigned int cec;
@ -526,9 +525,6 @@ static void wakeup_source_activate(struct wakeup_source *ws, bool hard)
"unregistered wakeup source\n"))
return;
if (hard)
pm_system_wakeup();
ws->active = true;
ws->active_count++;
ws->last_time = ktime_get();
@ -554,7 +550,10 @@ static void wakeup_source_report_event(struct wakeup_source *ws, bool hard)
ws->wakeup_count++;
if (!ws->active)
wakeup_source_activate(ws, hard);
wakeup_source_activate(ws);
if (hard)
pm_system_wakeup();
}
/**

27
drivers/block/drbd/drbd_req.c
View File

@ -315,24 +315,32 @@ void drbd_req_complete(struct drbd_request *req, struct bio_and_error *m)
}
/* still holds resource->req_lock */
static int drbd_req_put_completion_ref(struct drbd_request *req, struct bio_and_error *m, int put)
static void drbd_req_put_completion_ref(struct drbd_request *req, struct bio_and_error *m, int put)
{
struct drbd_device *device = req->device;
D_ASSERT(device, m || (req->rq_state & RQ_POSTPONED));
if (!put)
return;
if (!atomic_sub_and_test(put, &req->completion_ref))
return 0;
return;
drbd_req_complete(req, m);
/* local completion may still come in later,
* we need to keep the req object around. */
if (req->rq_state & RQ_LOCAL_ABORTED)
return;
if (req->rq_state & RQ_POSTPONED) {
/* don't destroy the req object just yet,
* but queue it for retry */
drbd_restart_request(req);
return 0;
return;
}
return 1;
kref_put(&req->kref, drbd_req_destroy);
}
static void set_if_null_req_next(struct drbd_peer_device *peer_device, struct drbd_request *req)
@ -519,12 +527,8 @@ static void mod_rq_state(struct drbd_request *req, struct bio_and_error *m,
if (req->i.waiting)
wake_up(&device->misc_wait);
if (c_put) {
if (drbd_req_put_completion_ref(req, m, c_put))
kref_put(&req->kref, drbd_req_destroy);
} else {
kref_put(&req->kref, drbd_req_destroy);
}
drbd_req_put_completion_ref(req, m, c_put);
kref_put(&req->kref, drbd_req_destroy);
}
static void drbd_report_io_error(struct drbd_device *device, struct drbd_request *req)
@ -1366,8 +1370,7 @@ nodata:
}
out:
if (drbd_req_put_completion_ref(req, &m, 1))
kref_put(&req->kref, drbd_req_destroy);
drbd_req_put_completion_ref(req, &m, 1);
spin_unlock_irq(&resource->req_lock);
/* Even though above is a kref_put(), this is safe.

8
drivers/block/xen-blkback/xenbus.c
View File

@ -504,11 +504,13 @@ static int xen_blkbk_remove(struct xenbus_device *dev)
dev_set_drvdata(&dev->dev, NULL);
if (be->blkif)
if (be->blkif) {
xen_blkif_disconnect(be->blkif);
/* Put the reference we set in xen_blkif_alloc(). */
xen_blkif_put(be->blkif);
/* Put the reference we set in xen_blkif_alloc(). */
xen_blkif_put(be->blkif);
}
kfree(be->mode);
kfree(be);
return 0;

6
drivers/char/lp.c
View File

@ -859,7 +859,11 @@ static int __init lp_setup (char *str)
} else if (!strcmp(str, "auto")) {
parport_nr[0] = LP_PARPORT_AUTO;
} else if (!strcmp(str, "none")) {
parport_nr[parport_ptr++] = LP_PARPORT_NONE;
if (parport_ptr < LP_NO)
parport_nr[parport_ptr++] = LP_PARPORT_NONE;
else
printk(KERN_INFO "lp: too many ports, %s ignored.\n",
str);
} else if (!strcmp(str, "reset")) {
reset = 1;
}

5
drivers/char/mem.c
View File

@ -340,6 +340,11 @@ static const struct vm_operations_struct mmap_mem_ops = {
static int mmap_mem(struct file *file, struct vm_area_struct *vma)
{
size_t size = vma->vm_end - vma->vm_start;
phys_addr_t offset = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
/* It's illegal to wrap around the end of the physical address space. */
if (offset + (phys_addr_t)size < offset)
return -EINVAL;
if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
return -EINVAL;

9
drivers/cpufreq/Kconfig.arm
View File

@ -71,6 +71,15 @@ config ARM_HIGHBANK_CPUFREQ
If in doubt, say N.
config ARM_DB8500_CPUFREQ
tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
default ARCH_U8500
depends on HAS_IOMEM
depends on !CPU_THERMAL || THERMAL
help
This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
series.
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC

2
drivers/cpufreq/Makefile
View File

@ -53,7 +53,7 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_DB8500_CPUFREQ) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o

2
drivers/dax/super.c
View File

@ -44,6 +44,7 @@ void dax_read_unlock(int id)
}
EXPORT_SYMBOL_GPL(dax_read_unlock);
#ifdef CONFIG_BLOCK
int bdev_dax_pgoff(struct block_device *bdev, sector_t sector, size_t size,
pgoff_t *pgoff)
{
@ -112,6 +113,7 @@ int __bdev_dax_supported(struct super_block *sb, int blocksize)
return 0;
}
EXPORT_SYMBOL_GPL(__bdev_dax_supported);
#endif
/**
* struct dax_device - anchor object for dax services

17
drivers/firmware/efi/efi-pstore.c
View File

@ -53,6 +53,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry,
if (sscanf(name, "dump-type%u-%u-%d-%lu-%c",
&record->type, &part, &cnt, &time, &data_type) == 5) {
record->id = generic_id(time, part, cnt);
record->part = part;
record->count = cnt;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
@ -64,6 +65,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry,
} else if (sscanf(name, "dump-type%u-%u-%d-%lu",
&record->type, &part, &cnt, &time) == 4) {
record->id = generic_id(time, part, cnt);
record->part = part;
record->count = cnt;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
@ -77,6 +79,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry,
* multiple logs, remains.
*/
record->id = generic_id(time, part, 0);
record->part = part;
record->count = 0;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
@ -241,9 +244,15 @@ static int efi_pstore_write(struct pstore_record *record)
efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
int i, ret = 0;
record->time.tv_sec = get_seconds();
record->time.tv_nsec = 0;
record->id = generic_id(record->time.tv_sec, record->part,
record->count);
snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu-%c",
record->type, record->part, record->count,
get_seconds(), record->compressed ? 'C' : 'D');
record->time.tv_sec, record->compressed ? 'C' : 'D');
for (i = 0; i < DUMP_NAME_LEN; i++)
efi_name[i] = name[i];
@ -255,7 +264,6 @@ static int efi_pstore_write(struct pstore_record *record)
if (record->reason == KMSG_DUMP_OOPS)
efivar_run_worker();
record->id = record->part;
return ret;
};
@ -287,7 +295,7 @@ static int efi_pstore_erase_func(struct efivar_entry *entry, void *data)
* holding multiple logs, remains.
*/
snprintf(name_old, sizeof(name_old), "dump-type%u-%u-%lu",
ed->record->type, (unsigned int)ed->record->id,
ed->record->type, ed->record->part,
ed->record->time.tv_sec);
for (i = 0; i < DUMP_NAME_LEN; i++)
@ -320,10 +328,7 @@ static int efi_pstore_erase(struct pstore_record *record)
char name[DUMP_NAME_LEN];
efi_char16_t efi_name[DUMP_NAME_LEN];
int found, i;
unsigned int part;
do_div(record->id, 1000);
part = do_div(record->id, 100);
snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu",
record->type, record->part, record->count,
record->time.tv_sec);

21
drivers/firmware/google/vpd.c
View File

@ -116,9 +116,13 @@ static int vpd_section_attrib_add(const u8 *key, s32 key_len,
return VPD_OK;
info = kzalloc(sizeof(*info), GFP_KERNEL);
info->key = kzalloc(key_len + 1, GFP_KERNEL);
if (!info->key)
if (!info)
return -ENOMEM;
info->key = kzalloc(key_len + 1, GFP_KERNEL);
if (!info->key) {
ret = -ENOMEM;
goto free_info;
}
memcpy(info->key, key, key_len);
@ -135,12 +139,17 @@ static int vpd_section_attrib_add(const u8 *key, s32 key_len,
list_add_tail(&info->list, &sec->attribs);
ret = sysfs_create_bin_file(sec->kobj, &info->bin_attr);
if (ret) {
kfree(info->key);
return ret;
}
if (ret)
goto free_info_key;
return 0;
free_info_key:
kfree(info->key);
free_info:
kfree(info);
return ret;
}
static void vpd_section_attrib_destroy(struct vpd_section *sec)

3
drivers/firmware/ti_sci.c
View File

@ -202,7 +202,8 @@ static int ti_sci_debugfs_create(struct platform_device *pdev,
info->debug_buffer[info->debug_region_size] = 0;
info->d = debugfs_create_file(strncat(debug_name, dev_name(dev),
sizeof(debug_name)),
sizeof(debug_name) -
sizeof("ti_sci_debug@")),
0444, NULL, info, &ti_sci_debug_fops);
if (IS_ERR(info->d))
return PTR_ERR(info->d);

49
drivers/gpu/drm/arm/hdlcd_crtc.c
View File

@ -10,6 +10,7 @@
*/
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
@ -226,16 +227,33 @@ static const struct drm_crtc_helper_funcs hdlcd_crtc_helper_funcs = {
static int hdlcd_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
u32 src_w, src_h;
struct drm_rect clip = { 0 };
struct drm_crtc_state *crtc_state;
u32 src_h = state->src_h >> 16;
src_w = state->src_w >> 16;
src_h = state->src_h >> 16;
/* we can't do any scaling of the plane source */
if ((src_w != state->crtc_w) || (src_h != state->crtc_h))
/* only the HDLCD_REG_FB_LINE_COUNT register has a limit */
if (src_h >= HDLCD_MAX_YRES) {
DRM_DEBUG_KMS("Invalid source width: %d\n", src_h);
return -EINVAL;
}
return 0;
if (!state->fb || !state->crtc)
return 0;
crtc_state = drm_atomic_get_existing_crtc_state(state->state,
state->crtc);
if (!crtc_state) {
DRM_DEBUG_KMS("Invalid crtc state\n");
return -EINVAL;
}
clip.x2 = crtc_state->adjusted_mode.hdisplay;
clip.y2 = crtc_state->adjusted_mode.vdisplay;
return drm_plane_helper_check_state(state, &clip,
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
false, true);
}
static void hdlcd_plane_atomic_update(struct drm_plane *plane,
@ -244,21 +262,20 @@ static void hdlcd_plane_atomic_update(struct drm_plane *plane,
struct drm_framebuffer *fb = plane->state->fb;
struct hdlcd_drm_private *hdlcd;
struct drm_gem_cma_object *gem;
u32 src_w, src_h, dest_w, dest_h;
u32 src_x, src_y, dest_h;
dma_addr_t scanout_start;
if (!fb)
return;
src_w = plane->state->src_w >> 16;
src_h = plane->state->src_h >> 16;
dest_w = plane->state->crtc_w;
dest_h = plane->state->crtc_h;
src_x = plane->state->src.x1 >> 16;
src_y = plane->state->src.y1 >> 16;
dest_h = drm_rect_height(&plane->state->dst);
gem = drm_fb_cma_get_gem_obj(fb, 0);
scanout_start = gem->paddr + fb->offsets[0] +
plane->state->crtc_y * fb->pitches[0] +
plane->state->crtc_x *
fb->format->cpp[0];
src_y * fb->pitches[0] +
src_x * fb->format->cpp[0];
hdlcd = plane->dev->dev_private;
hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_LENGTH, fb->pitches[0]);
@ -305,7 +322,6 @@ static struct drm_plane *hdlcd_plane_init(struct drm_device *drm)
formats, ARRAY_SIZE(formats),
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
devm_kfree(drm->dev, plane);
return ERR_PTR(ret);
}
@ -329,7 +345,6 @@ int hdlcd_setup_crtc(struct drm_device *drm)
&hdlcd_crtc_funcs, NULL);
if (ret) {
hdlcd_plane_destroy(primary);
devm_kfree(drm->dev, primary);
return ret;
}

32
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
View File

@ -152,8 +152,7 @@ static const struct drm_connector_funcs atmel_hlcdc_panel_connector_funcs = {
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
const struct device_node *np)
static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int endpoint)
{
struct atmel_hlcdc_dc *dc = dev->dev_private;
struct atmel_hlcdc_rgb_output *output;
@ -161,6 +160,11 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
struct drm_bridge *bridge;
int ret;
ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 0, endpoint,
&panel, &bridge);
if (ret)
return ret;
output = devm_kzalloc(dev->dev, sizeof(*output), GFP_KERNEL);
if (!output)
return -EINVAL;
@ -177,10 +181,6 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
output->encoder.possible_crtcs = 0x1;
ret = drm_of_find_panel_or_bridge(np, 0, 0, &panel, &bridge);
if (ret)
return ret;
if (panel) {
output->connector.dpms = DRM_MODE_DPMS_OFF;
output->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
@ -220,22 +220,14 @@ err_encoder_cleanup:
int atmel_hlcdc_create_outputs(struct drm_device *dev)
{
struct device_node *remote;
int ret = -ENODEV;
int endpoint = 0;
int endpoint, ret = 0;
while (true) {
/* Loop thru possible multiple connections to the output */
remote = of_graph_get_remote_node(dev->dev->of_node, 0,
endpoint++);
if (!remote)
break;
for (endpoint = 0; !ret; endpoint++)
ret = atmel_hlcdc_attach_endpoint(dev, endpoint);
ret = atmel_hlcdc_attach_endpoint(dev, remote);
of_node_put(remote);
if (ret)
return ret;
}
/* At least one device was successfully attached.*/
if (ret == -ENODEV && endpoint)
return 0;
return ret;
}

4
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
View File

@ -44,6 +44,7 @@ static struct etnaviv_gem_submit *submit_create(struct drm_device *dev,
/* initially, until copy_from_user() and bo lookup succeeds: */
submit->nr_bos = 0;
submit->fence = NULL;
ww_acquire_init(&submit->ticket, &reservation_ww_class);
}
@ -294,7 +295,8 @@ static void submit_cleanup(struct etnaviv_gem_submit *submit)
}
ww_acquire_fini(&submit->ticket);
dma_fence_put(submit->fence);
if (submit->fence)
dma_fence_put(submit->fence);
kfree(submit);
}

Some files were not shown because too many files have changed in this diff Show More