mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
ARM: dts: imx7: add support for kamstrup flex concentrator
This adds support for the OMNIA Flex Concentrator product from Kamstrup A/S. It's providing radio mesh communication infrastructure for smart electricity meters. Kamstrup OMNIA is a modular and scalable smart grid platform. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Bruno Thomsen
Shawn Guo
parent
b675aaee54
commit
1e1a5afde9
@ -644,6 +644,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
|
||||
imx7d-colibri-emmc-aster.dtb \
|
||||
imx7d-colibri-emmc-eval-v3.dtb \
|
||||
imx7d-colibri-eval-v3.dtb \
|
||||
imx7d-flex-concentrator.dtb \
|
||||
imx7d-flex-concentrator-mfg.dtb \
|
||||
imx7d-mba7.dtb \
|
||||
imx7d-meerkat96.dtb \
|
||||
imx7d-nitrogen7.dtb \
|
||||
|
||||
25
arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
Normal file
25
arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
Normal file
@ -0,0 +1,25 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for Kamstrup OMNIA Flex Concentrator in
|
||||
* manufacturing/debugging mode.
|
||||
*
|
||||
* Copyright (C) 2020 Kamstrup A/S
|
||||
* Author: Bruno Thomsen <bruno.thomsen@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx7d-flex-concentrator.dts"
|
||||
|
||||
/ {
|
||||
model = "Kamstrup OMNIA Flex Concentrator - Manufacturing";
|
||||
compatible = "kam,imx7d-flex-concentrator-mfg", "fsl,imx7d";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart4;
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
};
|
||||
314
arch/arm/boot/dts/imx7d-flex-concentrator.dts
Normal file
314
arch/arm/boot/dts/imx7d-flex-concentrator.dts
Normal file
@ -0,0 +1,314 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for Kamstrup OMNIA Flex Concentrator.
|
||||
*
|
||||
* Copyright (C) 2020 Kamstrup A/S
|
||||
* Author: Bruno Thomsen <bruno.thomsen@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx7d-tqma7.dtsi"
|
||||
|
||||
/* One I2C device on TQMa7 SoM is not mounted */
|
||||
/delete-node/ &ds1339;
|
||||
|
||||
/ {
|
||||
model = "Kamstrup OMNIA Flex Concentrator";
|
||||
compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d";
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
/* 1024 MB - TQMa7D board configuration */
|
||||
reg = <0x80000000 0x40000000>;
|
||||
};
|
||||
|
||||
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBUS_USBOTG2";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_vref_1v8: regulator-vref-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC1V8_REF";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&sw2_reg>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Human Machine Interface consists of 4 dual red/green LEDs.
|
||||
* hmi-a:green is controlled directly by the switch-mode power supply.
|
||||
* hmi-a:red is not used.
|
||||
*/
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_leds>;
|
||||
|
||||
led-0 {
|
||||
label = "hmi-b:red:heartbeat-degraded";
|
||||
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "hmi-b:green:heartbeat-running";
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
label = "hmi-c:red:mesh-error";
|
||||
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
label = "hmi-c:green:mesh-activity";
|
||||
gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
label = "hmi-d:red:omnia-error";
|
||||
gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-5 {
|
||||
label = "hmi-d:green:omnia-activity";
|
||||
gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Errata e10574 board restart workaround.
|
||||
*/
|
||||
gpio-restart {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_restart>;
|
||||
compatible = "gpio-restart";
|
||||
gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
|
||||
priority = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Analog signals
|
||||
* ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806)
|
||||
*/
|
||||
&adc1 {
|
||||
vref-supply = <®_vref_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi2>;
|
||||
num-chipselects = <1>;
|
||||
cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
pcf2127: rtc@0 {
|
||||
compatible = "nxp,pcf2127";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi4>;
|
||||
num-chipselects = <1>;
|
||||
cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* ST chip maximum SPI clock frequency is 33 MHz.
|
||||
*
|
||||
* TCG specification - Section 6.4.1 Clocking:
|
||||
* TPM shall support a SPI clock frequency range of 10-24 MHz.
|
||||
*/
|
||||
st33htph: tpm-tis@0 {
|
||||
compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet1>;
|
||||
phy-mode = "rmii";
|
||||
phy-handle = <ðphy>;
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* MDIO bus reset is used to generate PHY device reset before
|
||||
* Ethernet PHY type ID auto-detection. Otherwise this communication
|
||||
* fails as device does not answer when recommended reset circuit
|
||||
* is used.
|
||||
*/
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset-delay-us = <100000>;
|
||||
reset-post-delay-us = <500000>;
|
||||
reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
|
||||
|
||||
/* Microchip/Micrel KSZ8081RNB */
|
||||
ethphy: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Detection signals for internal USB modules.
|
||||
* Used for robust USB plug and play handling such as USB downstream port
|
||||
* power-cycle and USB hub reset in case of misbehaving or crashed modules.
|
||||
*
|
||||
* SMPS - AC input monitor based on zero crossing.
|
||||
* Used for last gasp notification.
|
||||
*/
|
||||
&gpio3 {
|
||||
gpio-line-names = "", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "module-b-detection", "", "module-a-detection", "", "", "", "";
|
||||
};
|
||||
|
||||
/*
|
||||
* Tamper IRQ trigger timestamp reading.
|
||||
* Used for sealed cover opened/closed notification.
|
||||
*/
|
||||
&gpio5 {
|
||||
gpio-line-names = "", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "rtc-tamper-irq", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_misc>;
|
||||
|
||||
pinctrl_ecspi2: ecspi2grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */
|
||||
MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */
|
||||
MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */
|
||||
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */
|
||||
/* RTC - Tamper IRQ */
|
||||
MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi4: ecspi4grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */
|
||||
MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */
|
||||
MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */
|
||||
MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet1: enet1grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */
|
||||
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */
|
||||
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */
|
||||
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */
|
||||
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */
|
||||
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */
|
||||
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */
|
||||
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */
|
||||
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */
|
||||
/* PHY reset: SRE_FAST, DSE_X1 */
|
||||
MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */
|
||||
/* Clock from PHY to MAC: 100kPU */
|
||||
MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */
|
||||
/* PHY interrupt: 100kPU, HYS */
|
||||
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_leds: ledsgrp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */
|
||||
MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */
|
||||
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */
|
||||
MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */
|
||||
MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */
|
||||
MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_misc: miscgrp {
|
||||
fsl,pins = <
|
||||
/* Module A detection (low = present) */
|
||||
MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */
|
||||
/* Module B detection (low = present) */
|
||||
MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */
|
||||
/* SMPS - AC input monitor (high = failure) */
|
||||
MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */
|
||||
/* USB - Hub reset */
|
||||
MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_restart: restartgrp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */
|
||||
MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc_lpsr {
|
||||
pinctrl_usbotg2: usbotg2grp {
|
||||
fsl,pins = <
|
||||
MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */
|
||||
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */
|
||||
>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
|
||||
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg2>;
|
||||
vbus-supply = <®_usb_otg2_vbus>;
|
||||
srp-disable;
|
||||
hnp-disable;
|
||||
adp-disable;
|
||||
over-current-active-low;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* External watchdog feature provided by pcf2127.
|
||||
*/
|
||||
&wdog1 {
|
||||
status = "disabled";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user