From e684fa34c3a28b4893d43629a02a765a2a71e63e Mon Sep 17 00:00:00 2001
From: Shannon Nelson <shannon.nelson@intel.com>
Date: Tue, 11 Nov 2014 03:15:03 +0000
Subject: [PATCH 01/11] i40e: only warn once of PTP nonsupport in 100Mbit speed

Only warn once that PTP is not supported when linked at 100Mbit.

Yes, using a static this way means that this once-only message is not
port specific, but once only for the life of the driver, regardless of
the number of ports.  That should be plenty.

Change-ID: Ie6476530056df408452e195ef06afd4f57caa4b2
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ptp.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index 537b6216971d..f91510370c35 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -382,11 +382,17 @@ void i40e_ptp_set_increment(struct i40e_pf *pf)
 		incval = I40E_PTP_1GB_INCVAL;
 		break;
 	case I40E_LINK_SPEED_100MB:
-		dev_warn(&pf->pdev->dev,
-			 "%s: 1588 functionality is not supported at 100 Mbps. Stopping the PHC.\n",
-			 __func__);
+	{
+		static int warn_once;
+
+		if (!warn_once) {
+			dev_warn(&pf->pdev->dev,
+				 "1588 functionality is not supported at 100 Mbps. Stopping the PHC.\n");
+			warn_once++;
+		}
 		incval = 0;
 		break;
+	}
 	case I40E_LINK_SPEED_40GB:
 	default:
 		incval = I40E_PTP_40GB_INCVAL;

From c5c2f7c360af164448d87cb618af2ee5dad3a01a Mon Sep 17 00:00:00 2001
From: Mitch Williams <mitch.a.williams@intel.com>
Date: Tue, 11 Nov 2014 03:15:04 +0000
Subject: [PATCH 02/11] i40e: re-enable VFLR interrupt sooner

VF interrupt processing takes a looooong time, and it's possible that we
could lose a VFLR event if it happens while we're processing a VFLR on
another VF. This would leave the VF in a semi-permanent reset state,
which would not be cleared until yet another VF experiences a VFLR.

To correct this situation, we enable the VFLR interrupt cause before we
begin processing any pending resets. This means that any VFLR that
occurs during reset processing will generate another interrupt and this
routine will get called again.

This change may cause a spurious interrupt when multiple VFLRs occur
very close together in time. If this happens, then this routine will be
called again and it will detect no outstanding VFLR events and do
nothing. No harm, no foul.

Change-ID: Id0451f3e6e73a2cf6db1668296c71e129b59dc19
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index fff3c276736b..668d860275d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1869,6 +1869,12 @@ int i40e_vc_process_vflr_event(struct i40e_pf *pf)
 	if (!test_bit(__I40E_VFLR_EVENT_PENDING, &pf->state))
 		return 0;
 
+	/* re-enable vflr interrupt cause */
+	reg = rd32(hw, I40E_PFINT_ICR0_ENA);
+	reg |= I40E_PFINT_ICR0_ENA_VFLR_MASK;
+	wr32(hw, I40E_PFINT_ICR0_ENA, reg);
+	i40e_flush(hw);
+
 	clear_bit(__I40E_VFLR_EVENT_PENDING, &pf->state);
 	for (vf_id = 0; vf_id < pf->num_alloc_vfs; vf_id++) {
 		reg_idx = (hw->func_caps.vf_base_id + vf_id) / 32;
@@ -1885,12 +1891,6 @@ int i40e_vc_process_vflr_event(struct i40e_pf *pf)
 		}
 	}
 
-	/* re-enable vflr interrupt cause */
-	reg = rd32(hw, I40E_PFINT_ICR0_ENA);
-	reg |= I40E_PFINT_ICR0_ENA_VFLR_MASK;
-	wr32(hw, I40E_PFINT_ICR0_ENA, reg);
-	i40e_flush(hw);
-
 	return 0;
 }
 

From 7bda87c7fb2eaab8e144d6d0a2638099d7b6e5f5 Mon Sep 17 00:00:00 2001
From: Catherine Sullivan <catherine.sullivan@intel.com>
Date: Tue, 11 Nov 2014 03:15:06 +0000
Subject: [PATCH 03/11] i40e: Bump version to 1.1.23

Bumping minor version as this will be the second SW release and it
should be 1.

Change-ID: If0bd102095d2f059ae0c9b7f4ad625535ffbbdee
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a0bee83ab2de..68c19c87ebed 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -38,8 +38,8 @@ static const char i40e_driver_string[] =
 #define DRV_KERN "-k"
 
 #define DRV_VERSION_MAJOR 1
-#define DRV_VERSION_MINOR 0
-#define DRV_VERSION_BUILD 21
+#define DRV_VERSION_MINOR 1
+#define DRV_VERSION_BUILD 23
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN

From 2fd75f31f6bacaed38061f95f0fee26de3e01170 Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:20 +0000
Subject: [PATCH 04/11] i40e: Resume Port Tx after DCB event

When there are DCB configuration changes based on DCBX the firmware suspends
the port's Tx and generates an event to the PF. The PF is then responsible
to reconfigure the PF VSIs and switching topology as per the updated DCB
configuration and then resume the port's Tx by calling the "Resume Port Tx"
AQ command.

This patch adds this call to the flow that handles DCB re-configuration in
the PF.

Change-ID: I5b860ad48abfbf379b003143c4d3453e2ed5cc1c
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 20 ++++++++++++
 drivers/net/ethernet/intel/i40e/i40e_main.c   | 31 ++++++++++++++++++-
 .../net/ethernet/intel/i40e/i40e_prototype.h  |  2 ++
 3 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index c49416cfe616..76735d5f34eb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -3216,6 +3216,26 @@ i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw,
 	return status;
 }
 
+/**
+ * i40e_aq_resume_port_tx
+ * @hw: pointer to the hardware structure
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Resume port's Tx traffic
+ **/
+i40e_status i40e_aq_resume_port_tx(struct i40e_hw *hw,
+				   struct i40e_asq_cmd_details *cmd_details)
+{
+	struct i40e_aq_desc desc;
+	i40e_status status;
+
+	i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_resume_port_tx);
+
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+	return status;
+}
+
 /**
  * i40e_set_pci_config_data - store PCI bus info
  * @hw: pointer to hardware structure
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 68c19c87ebed..185f977e8a98 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4381,6 +4381,31 @@ static void i40e_dcb_reconfigure(struct i40e_pf *pf)
 	}
 }
 
+/**
+ * i40e_resume_port_tx - Resume port Tx
+ * @pf: PF struct
+ *
+ * Resume a port's Tx and issue a PF reset in case of failure to
+ * resume.
+ **/
+static int i40e_resume_port_tx(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = &pf->hw;
+	int ret;
+
+	ret = i40e_aq_resume_port_tx(hw, NULL);
+	if (ret) {
+		dev_info(&pf->pdev->dev,
+			 "AQ command Resume Port Tx failed = %d\n",
+			  pf->hw.aq.asq_last_status);
+		/* Schedule PF reset to recover */
+		set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
+		i40e_service_event_schedule(pf);
+	}
+
+	return ret;
+}
+
 /**
  * i40e_init_pf_dcb - Initialize DCB configuration
  * @pf: PF being configured
@@ -5075,7 +5100,11 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 	/* Changes in configuration update VEB/VSI */
 	i40e_dcb_reconfigure(pf);
 
-	i40e_pf_unquiesce_all_vsi(pf);
+	ret = i40e_resume_port_tx(pf);
+
+	/* In case of error no point in resuming VSIs */
+	if (!ret)
+		i40e_pf_unquiesce_all_vsi(pf);
 exit:
 	return ret;
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 246c27869a63..98a735cdf038 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -230,6 +230,8 @@ i40e_status i40e_aq_query_switch_comp_bw_config(struct i40e_hw *hw,
 		u16 seid,
 		struct i40e_aqc_query_switching_comp_bw_config_resp *bw_data,
 		struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_aq_resume_port_tx(struct i40e_hw *hw,
+				   struct i40e_asq_cmd_details *cmd_details);
 /* i40e_common */
 i40e_status i40e_init_shared_code(struct i40e_hw *hw);
 i40e_status i40e_pf_reset(struct i40e_hw *hw);

From 9fa61dd2153a4ff3a57891d4866a2595eb9ac81a Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:25 +0000
Subject: [PATCH 05/11] i40e: Add support to firmware CEE DCBX mode

This patch allows i40e driver to query and use DCB configuration from
firmware when firmware DCBX agent is in CEE mode.

Change-ID: I30f92a67eb890f0f024f35339696e6e83d49a274
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../net/ethernet/intel/i40e/i40e_adminq_cmd.h |  45 +++-
 drivers/net/ethernet/intel/i40e/i40e_common.c |  28 +++
 drivers/net/ethernet/intel/i40e/i40e_dcb.c    | 203 +++++++++++++++++-
 drivers/net/ethernet/intel/i40e/i40e_dcb.h    |   5 +
 drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c |   8 +-
 .../net/ethernet/intel/i40e/i40e_debugfs.c    |   2 +
 drivers/net/ethernet/intel/i40e/i40e_fcoe.c   |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c   |  26 ++-
 .../net/ethernet/intel/i40e/i40e_prototype.h  |   3 +
 drivers/net/ethernet/intel/i40e/i40e_type.h   |  39 ++--
 10 files changed, 327 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index a65bc4398971..8835aeeff23e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -255,6 +255,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_lldp_delete_tlv	= 0x0A04,
 	i40e_aqc_opc_lldp_stop		= 0x0A05,
 	i40e_aqc_opc_lldp_start		= 0x0A06,
+	i40e_aqc_opc_get_cee_dcb_cfg	= 0x0A07,
 
 	/* Tunnel commands */
 	i40e_aqc_opc_add_udp_tunnel	= 0x0B00,
@@ -1987,10 +1988,50 @@ struct i40e_aqc_lldp_start {
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_start);
 
-/* Apply MIB changes (0x0A07)
- * uses the generic struc as it contains no data
+/* Get CEE DCBX Oper Config (0x0A07)
+ * uses the generic descriptor struct
+ * returns below as indirect response
  */
 
+#define I40E_AQC_CEE_APP_FCOE_SHIFT	0x0
+#define I40E_AQC_CEE_APP_FCOE_MASK	(0x7 << I40E_AQC_CEE_APP_FCOE_SHIFT)
+#define I40E_AQC_CEE_APP_ISCSI_SHIFT	0x3
+#define I40E_AQC_CEE_APP_ISCSI_MASK	(0x7 << I40E_AQC_CEE_APP_ISCSI_SHIFT)
+#define I40E_AQC_CEE_APP_FIP_SHIFT	0x8
+#define I40E_AQC_CEE_APP_FIP_MASK	(0x7 << I40E_AQC_CEE_APP_FIP_SHIFT)
+#define I40E_AQC_CEE_PG_STATUS_SHIFT	0x0
+#define I40E_AQC_CEE_PG_STATUS_MASK	(0x7 << I40E_AQC_CEE_PG_STATUS_SHIFT)
+#define I40E_AQC_CEE_PFC_STATUS_SHIFT	0x3
+#define I40E_AQC_CEE_PFC_STATUS_MASK	(0x7 << I40E_AQC_CEE_PFC_STATUS_SHIFT)
+#define I40E_AQC_CEE_APP_STATUS_SHIFT	0x8
+#define I40E_AQC_CEE_APP_STATUS_MASK	(0x7 << I40E_AQC_CEE_APP_STATUS_SHIFT)
+struct i40e_aqc_get_cee_dcb_cfg_v1_resp {
+	u8	reserved1;
+	u8	oper_num_tc;
+	u8	oper_prio_tc[4];
+	u8	reserved2;
+	u8	oper_tc_bw[8];
+	u8	oper_pfc_en;
+	u8	reserved3;
+	__le16	oper_app_prio;
+	u8	reserved4;
+	__le16	tlv_status;
+};
+
+I40E_CHECK_STRUCT_LEN(0x18, i40e_aqc_get_cee_dcb_cfg_v1_resp);
+
+struct i40e_aqc_get_cee_dcb_cfg_resp {
+	u8	oper_num_tc;
+	u8	oper_prio_tc[4];
+	u8	oper_tc_bw[8];
+	u8	oper_pfc_en;
+	__le16	oper_app_prio;
+	__le32	tlv_status;
+	u8	reserved[12];
+};
+
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_get_cee_dcb_cfg_resp);
+
 /* Add Udp Tunnel command and completion (direct 0x0B00) */
 struct i40e_aqc_add_udp_tunnel {
 	__le16	udp_port;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 76735d5f34eb..b601b3cfd92b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -2659,6 +2659,34 @@ i40e_status i40e_aq_start_lldp(struct i40e_hw *hw,
 	return status;
 }
 
+/**
+ * i40e_aq_get_cee_dcb_config
+ * @hw: pointer to the hw struct
+ * @buff: response buffer that stores CEE operational configuration
+ * @buff_size: size of the buffer passed
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Get CEE DCBX mode operational configuration from firmware
+ **/
+i40e_status i40e_aq_get_cee_dcb_config(struct i40e_hw *hw,
+				       void *buff, u16 buff_size,
+				       struct i40e_asq_cmd_details *cmd_details)
+{
+	struct i40e_aq_desc desc;
+	i40e_status status;
+
+	if (buff_size == 0 || !buff)
+		return I40E_ERR_PARAM;
+
+	i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_cee_dcb_cfg);
+
+	desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF);
+	status = i40e_asq_send_command(hw, &desc, (void *)buff, buff_size,
+				       cmd_details);
+
+	return status;
+}
+
 /**
  * i40e_aq_add_udp_tunnel
  * @hw: pointer to the hw struct
diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
index 036570d76176..1396c70b871c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
@@ -59,7 +59,7 @@ i40e_status i40e_get_dcbx_status(struct i40e_hw *hw, u16 *status)
 static void i40e_parse_ieee_etscfg_tlv(struct i40e_lldp_org_tlv *tlv,
 				       struct i40e_dcbx_config *dcbcfg)
 {
-	struct i40e_ieee_ets_config *etscfg;
+	struct i40e_dcb_ets_config *etscfg;
 	u8 *buf = tlv->tlvinfo;
 	u16 offset = 0;
 	u8 priority;
@@ -406,6 +406,166 @@ free_mem:
 	return ret;
 }
 
+/**
+ * i40e_cee_to_dcb_v1_config
+ * @cee_cfg: pointer to CEE v1 response configuration struct
+ * @dcbcfg: DCB configuration struct
+ *
+ * Convert CEE v1 configuration from firmware to DCB configuration
+ **/
+static void i40e_cee_to_dcb_v1_config(
+			struct i40e_aqc_get_cee_dcb_cfg_v1_resp *cee_cfg,
+			struct i40e_dcbx_config *dcbcfg)
+{
+	u16 status, tlv_status = le16_to_cpu(cee_cfg->tlv_status);
+	u16 app_prio = le16_to_cpu(cee_cfg->oper_app_prio);
+	u8 i, tc, err, sync, oper;
+
+	/* CEE PG data to ETS config */
+	dcbcfg->etscfg.maxtcs = cee_cfg->oper_num_tc;
+
+	for (i = 0; i < 4; i++) {
+		tc = (u8)((cee_cfg->oper_prio_tc[i] &
+			 I40E_CEE_PGID_PRIO_1_MASK) >>
+			 I40E_CEE_PGID_PRIO_1_SHIFT);
+		dcbcfg->etscfg.prioritytable[i*2] =  tc;
+		tc = (u8)((cee_cfg->oper_prio_tc[i] &
+			 I40E_CEE_PGID_PRIO_0_MASK) >>
+			 I40E_CEE_PGID_PRIO_0_SHIFT);
+		dcbcfg->etscfg.prioritytable[i*2 + 1] = tc;
+	}
+
+	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
+		dcbcfg->etscfg.tcbwtable[i] = cee_cfg->oper_tc_bw[i];
+
+	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
+		if (dcbcfg->etscfg.prioritytable[i] == I40E_CEE_PGID_STRICT) {
+			/* Map it to next empty TC */
+			dcbcfg->etscfg.prioritytable[i] =
+						cee_cfg->oper_num_tc - 1;
+			dcbcfg->etscfg.tsatable[i] = I40E_IEEE_TSA_STRICT;
+		} else {
+			dcbcfg->etscfg.tsatable[i] = I40E_IEEE_TSA_ETS;
+		}
+	}
+
+	/* CEE PFC data to ETS config */
+	dcbcfg->pfc.pfcenable = cee_cfg->oper_pfc_en;
+	dcbcfg->pfc.pfccap = I40E_MAX_TRAFFIC_CLASS;
+
+	status = (tlv_status & I40E_AQC_CEE_APP_STATUS_MASK) >>
+		  I40E_AQC_CEE_APP_STATUS_SHIFT;
+	err = (status & I40E_TLV_STATUS_ERR) ? 1 : 0;
+	sync = (status & I40E_TLV_STATUS_SYNC) ? 1 : 0;
+	oper = (status & I40E_TLV_STATUS_OPER) ? 1 : 0;
+	/* Add APPs if Error is False and Oper/Sync is True */
+	if (!err && sync && oper) {
+		/* CEE operating configuration supports FCoE/iSCSI/FIP only */
+		dcbcfg->numapps = I40E_CEE_OPER_MAX_APPS;
+
+		/* FCoE APP */
+		dcbcfg->app[0].priority =
+			(app_prio & I40E_AQC_CEE_APP_FCOE_MASK) >>
+			 I40E_AQC_CEE_APP_FCOE_SHIFT;
+		dcbcfg->app[0].selector = I40E_APP_SEL_ETHTYPE;
+		dcbcfg->app[0].protocolid = I40E_APP_PROTOID_FCOE;
+
+		/* iSCSI APP */
+		dcbcfg->app[1].priority =
+			(app_prio & I40E_AQC_CEE_APP_ISCSI_MASK) >>
+			 I40E_AQC_CEE_APP_ISCSI_SHIFT;
+		dcbcfg->app[1].selector = I40E_APP_SEL_TCPIP;
+		dcbcfg->app[1].protocolid = I40E_APP_PROTOID_ISCSI;
+
+		/* FIP APP */
+		dcbcfg->app[2].priority =
+			(app_prio & I40E_AQC_CEE_APP_FIP_MASK) >>
+			 I40E_AQC_CEE_APP_FIP_SHIFT;
+		dcbcfg->app[2].selector = I40E_APP_SEL_ETHTYPE;
+		dcbcfg->app[2].protocolid = I40E_APP_PROTOID_FIP;
+	}
+}
+
+/**
+ * i40e_cee_to_dcb_config
+ * @cee_cfg: pointer to CEE configuration struct
+ * @dcbcfg: DCB configuration struct
+ *
+ * Convert CEE configuration from firmware to DCB configuration
+ **/
+static void i40e_cee_to_dcb_config(
+				struct i40e_aqc_get_cee_dcb_cfg_resp *cee_cfg,
+				struct i40e_dcbx_config *dcbcfg)
+{
+	u32 status, tlv_status = le32_to_cpu(cee_cfg->tlv_status);
+	u16 app_prio = le16_to_cpu(cee_cfg->oper_app_prio);
+	u8 i, tc, err, sync, oper;
+
+	/* CEE PG data to ETS config */
+	dcbcfg->etscfg.maxtcs = cee_cfg->oper_num_tc;
+
+	for (i = 0; i < 4; i++) {
+		tc = (u8)((cee_cfg->oper_prio_tc[i] &
+			 I40E_CEE_PGID_PRIO_1_MASK) >>
+			 I40E_CEE_PGID_PRIO_1_SHIFT);
+		dcbcfg->etscfg.prioritytable[i*2] =  tc;
+		tc = (u8)((cee_cfg->oper_prio_tc[i] &
+			 I40E_CEE_PGID_PRIO_0_MASK) >>
+			 I40E_CEE_PGID_PRIO_0_SHIFT);
+		dcbcfg->etscfg.prioritytable[i*2 + 1] = tc;
+	}
+
+	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
+		dcbcfg->etscfg.tcbwtable[i] = cee_cfg->oper_tc_bw[i];
+
+	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
+		if (dcbcfg->etscfg.prioritytable[i] == I40E_CEE_PGID_STRICT) {
+			/* Map it to next empty TC */
+			dcbcfg->etscfg.prioritytable[i] =
+						cee_cfg->oper_num_tc - 1;
+			dcbcfg->etscfg.tsatable[i] = I40E_IEEE_TSA_STRICT;
+		} else {
+			dcbcfg->etscfg.tsatable[i] = I40E_IEEE_TSA_ETS;
+		}
+	}
+
+	/* CEE PFC data to ETS config */
+	dcbcfg->pfc.pfcenable = cee_cfg->oper_pfc_en;
+	dcbcfg->pfc.pfccap = I40E_MAX_TRAFFIC_CLASS;
+
+	status = (tlv_status & I40E_AQC_CEE_APP_STATUS_MASK) >>
+		  I40E_AQC_CEE_APP_STATUS_SHIFT;
+	err = (status & I40E_TLV_STATUS_ERR) ? 1 : 0;
+	sync = (status & I40E_TLV_STATUS_SYNC) ? 1 : 0;
+	oper = (status & I40E_TLV_STATUS_OPER) ? 1 : 0;
+	/* Add APPs if Error is False and Oper/Sync is True */
+	if (!err && sync && oper) {
+		/* CEE operating configuration supports FCoE/iSCSI/FIP only */
+		dcbcfg->numapps = I40E_CEE_OPER_MAX_APPS;
+
+		/* FCoE APP */
+		dcbcfg->app[0].priority =
+			(app_prio & I40E_AQC_CEE_APP_FCOE_MASK) >>
+			 I40E_AQC_CEE_APP_FCOE_SHIFT;
+		dcbcfg->app[0].selector = I40E_APP_SEL_ETHTYPE;
+		dcbcfg->app[0].protocolid = I40E_APP_PROTOID_FCOE;
+
+		/* iSCSI APP */
+		dcbcfg->app[1].priority =
+			(app_prio & I40E_AQC_CEE_APP_ISCSI_MASK) >>
+			 I40E_AQC_CEE_APP_ISCSI_SHIFT;
+		dcbcfg->app[1].selector = I40E_APP_SEL_TCPIP;
+		dcbcfg->app[1].protocolid = I40E_APP_PROTOID_ISCSI;
+
+		/* FIP APP */
+		dcbcfg->app[2].priority =
+			(app_prio & I40E_AQC_CEE_APP_FIP_MASK) >>
+			 I40E_AQC_CEE_APP_FIP_SHIFT;
+		dcbcfg->app[2].selector = I40E_APP_SEL_ETHTYPE;
+		dcbcfg->app[2].protocolid = I40E_APP_PROTOID_FIP;
+	}
+}
+
 /**
  * i40e_get_dcb_config
  * @hw: pointer to the hw struct
@@ -415,7 +575,44 @@ free_mem:
 i40e_status i40e_get_dcb_config(struct i40e_hw *hw)
 {
 	i40e_status ret = 0;
+	struct i40e_aqc_get_cee_dcb_cfg_resp cee_cfg;
+	struct i40e_aqc_get_cee_dcb_cfg_v1_resp cee_v1_cfg;
 
+	/* If Firmware version < v4.33 IEEE only */
+	if (((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver < 33)) ||
+	    (hw->aq.fw_maj_ver < 4))
+		goto ieee;
+
+	/* If Firmware version == v4.33 use old CEE struct */
+	if ((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver == 33)) {
+		ret = i40e_aq_get_cee_dcb_config(hw, &cee_v1_cfg,
+						 sizeof(cee_v1_cfg), NULL);
+		if (!ret) {
+			/* CEE mode */
+			hw->local_dcbx_config.dcbx_mode = I40E_DCBX_MODE_CEE;
+			i40e_cee_to_dcb_v1_config(&cee_v1_cfg,
+						  &hw->local_dcbx_config);
+		}
+	} else {
+		ret = i40e_aq_get_cee_dcb_config(hw, &cee_cfg,
+						 sizeof(cee_cfg), NULL);
+		if (!ret) {
+			/* CEE mode */
+			hw->local_dcbx_config.dcbx_mode = I40E_DCBX_MODE_CEE;
+			i40e_cee_to_dcb_config(&cee_cfg,
+					       &hw->local_dcbx_config);
+		}
+	}
+
+	/* CEE mode not enabled try querying IEEE data */
+	if (hw->aq.asq_last_status == I40E_AQ_RC_ENOENT)
+		goto ieee;
+	else
+		goto out;
+
+ieee:
+	/* IEEE mode */
+	hw->local_dcbx_config.dcbx_mode = I40E_DCBX_MODE_IEEE;
 	/* Get Local DCB Config */
 	ret = i40e_aq_get_dcb_config(hw, I40E_AQ_LLDP_MIB_LOCAL, 0,
 				     &hw->local_dcbx_config);
@@ -426,6 +623,10 @@ i40e_status i40e_get_dcb_config(struct i40e_hw *hw)
 	ret = i40e_aq_get_dcb_config(hw, I40E_AQ_LLDP_MIB_REMOTE,
 				     I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE,
 				     &hw->remote_dcbx_config);
+	/* Don't treat ENOENT as an error for Remote MIBs */
+	if (hw->aq.asq_last_status == I40E_AQ_RC_ENOENT)
+		ret = 0;
+
 out:
 	return ret;
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.h b/drivers/net/ethernet/intel/i40e/i40e_dcb.h
index 34cf1c30c7ff..e137e3fac8ee 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.h
@@ -65,6 +65,11 @@
 #define I40E_IEEE_ETS_PRIO_0_MASK	(0x7 << I40E_IEEE_ETS_PRIO_0_SHIFT)
 #define I40E_IEEE_ETS_PRIO_1_SHIFT	4
 #define I40E_IEEE_ETS_PRIO_1_MASK	(0x7 << I40E_IEEE_ETS_PRIO_1_SHIFT)
+#define I40E_CEE_PGID_PRIO_0_SHIFT	0
+#define I40E_CEE_PGID_PRIO_0_MASK	(0xF << I40E_CEE_PGID_PRIO_0_SHIFT)
+#define I40E_CEE_PGID_PRIO_1_SHIFT	4
+#define I40E_CEE_PGID_PRIO_1_MASK	(0xF << I40E_CEE_PGID_PRIO_1_SHIFT)
+#define I40E_CEE_PGID_STRICT		15
 
 /* Defines for IEEE TSA types */
 #define I40E_IEEE_TSA_STRICT		0
diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c b/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
index 00bc0cdb3a03..183dcb63ce98 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
@@ -207,7 +207,7 @@ void i40e_dcbnl_set_all(struct i40e_vsi *vsi)
  * VSI
  **/
 static int i40e_dcbnl_vsi_del_app(struct i40e_vsi *vsi,
-				  struct i40e_ieee_app_priority_table *app)
+				  struct i40e_dcb_app_priority_table *app)
 {
 	struct net_device *dev = vsi->netdev;
 	struct dcb_app sapp;
@@ -229,7 +229,7 @@ static int i40e_dcbnl_vsi_del_app(struct i40e_vsi *vsi,
  * Delete given APP from all the VSIs for given PF
  **/
 static void i40e_dcbnl_del_app(struct i40e_pf *pf,
-			      struct i40e_ieee_app_priority_table *app)
+			       struct i40e_dcb_app_priority_table *app)
 {
 	int v, err;
 	for (v = 0; v < pf->num_alloc_vsi; v++) {
@@ -252,7 +252,7 @@ static void i40e_dcbnl_del_app(struct i40e_pf *pf,
  * Find given APP in the DCB configuration
  **/
 static bool i40e_dcbnl_find_app(struct i40e_dcbx_config *cfg,
-				struct i40e_ieee_app_priority_table *app)
+				struct i40e_dcb_app_priority_table *app)
 {
 	int i;
 
@@ -277,7 +277,7 @@ static bool i40e_dcbnl_find_app(struct i40e_dcbx_config *cfg,
 void i40e_dcbnl_flush_apps(struct i40e_pf *pf,
 			   struct i40e_dcbx_config *new_cfg)
 {
-	struct i40e_ieee_app_priority_table app;
+	struct i40e_dcb_app_priority_table app;
 	struct i40e_dcbx_config *dcbxcfg;
 	struct i40e_hw *hw = &pf->hw;
 	int i;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index a03f4590cb0f..3a3c237b76d4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1312,6 +1312,8 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 			kfree(bw_data);
 			bw_data = NULL;
 
+			dev_info(&pf->pdev->dev,
+				 "port dcbx_mode=%d\n", cfg->dcbx_mode);
 			dev_info(&pf->pdev->dev,
 				 "port ets_cfg: willing=%d cbs=%d, maxtcs=%d\n",
 				 cfg->etscfg.willing, cfg->etscfg.cbs,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_fcoe.c b/drivers/net/ethernet/intel/i40e/i40e_fcoe.c
index 5d01db1d789b..a8b8bd95108d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_fcoe.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_fcoe.c
@@ -343,7 +343,7 @@ int i40e_init_pf_fcoe(struct i40e_pf *pf)
  **/
 u8 i40e_get_fcoe_tc_map(struct i40e_pf *pf)
 {
-	struct i40e_ieee_app_priority_table app;
+	struct i40e_dcb_app_priority_table app;
 	struct i40e_hw *hw = &pf->hw;
 	u8 enabled_tc = 0;
 	u8 tc, i;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 185f977e8a98..99b985cb53d5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4442,6 +4442,8 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
 			/* Enable DCB tagging only when more than one TC */
 			if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1)
 				pf->flags |= I40E_FLAG_DCB_ENABLED;
+			dev_dbg(&pf->pdev->dev,
+				"DCBX offload is supported for this PF.\n");
 		}
 	} else {
 		dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
@@ -5023,6 +5025,8 @@ bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
 		dev_dbg(&pf->pdev->dev, "APP Table change detected.\n");
 	}
 
+	dev_dbg(&pf->pdev->dev, "%s: need_reconfig=%d\n", __func__,
+		need_reconfig);
 	return need_reconfig;
 }
 
@@ -5050,11 +5054,16 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 	/* Ignore if event is not for Nearest Bridge */
 	type = ((mib->type >> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT)
 		& I40E_AQ_LLDP_BRIDGE_TYPE_MASK);
+	dev_dbg(&pf->pdev->dev,
+		"%s: LLDP event mib bridge type 0x%x\n", __func__, type);
 	if (type != I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE)
 		return ret;
 
 	/* Check MIB Type and return if event for Remote MIB update */
 	type = mib->type & I40E_AQ_LLDP_MIB_TYPE_MASK;
+	dev_dbg(&pf->pdev->dev,
+		"%s: LLDP event mib type %s\n", __func__,
+		type ? "remote" : "local");
 	if (type == I40E_AQ_LLDP_MIB_REMOTE) {
 		/* Update the remote cached instance and return */
 		ret = i40e_aq_get_dcb_config(hw, I40E_AQ_LLDP_MIB_REMOTE,
@@ -5063,12 +5072,14 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 		goto exit;
 	}
 
-	/* Convert/store the DCBX data from LLDPDU temporarily */
 	memset(&tmp_dcbx_cfg, 0, sizeof(tmp_dcbx_cfg));
-	ret = i40e_lldp_to_dcb_config(e->msg_buf, &tmp_dcbx_cfg);
+	/* Store the old configuration */
+	tmp_dcbx_cfg = *dcbx_cfg;
+
+	/* Get updated DCBX data from firmware */
+	ret = i40e_get_dcb_config(&pf->hw);
 	if (ret) {
-		/* Error in LLDPDU parsing return */
-		dev_info(&pf->pdev->dev, "Failed parsing LLDPDU from event buffer\n");
+		dev_info(&pf->pdev->dev, "Failed querying DCB configuration data from firmware.\n");
 		goto exit;
 	}
 
@@ -5078,12 +5089,9 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 		goto exit;
 	}
 
-	need_reconfig = i40e_dcb_need_reconfig(pf, dcbx_cfg, &tmp_dcbx_cfg);
+	need_reconfig = i40e_dcb_need_reconfig(pf, &tmp_dcbx_cfg, dcbx_cfg);
 
-	i40e_dcbnl_flush_apps(pf, &tmp_dcbx_cfg);
-
-	/* Overwrite the new configuration */
-	*dcbx_cfg = tmp_dcbx_cfg;
+	i40e_dcbnl_flush_apps(pf, dcbx_cfg);
 
 	if (!need_reconfig)
 		goto exit;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 98a735cdf038..24bdc4333dc6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -175,6 +175,9 @@ i40e_status i40e_aq_stop_lldp(struct i40e_hw *hw, bool shutdown_agent,
 				struct i40e_asq_cmd_details *cmd_details);
 i40e_status i40e_aq_start_lldp(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_aq_get_cee_dcb_config(struct i40e_hw *hw,
+				       void *buff, u16 buff_size,
+				       struct i40e_asq_cmd_details *cmd_details);
 i40e_status i40e_aq_add_udp_tunnel(struct i40e_hw *hw,
 				u16 udp_port, u8 protocol_index,
 				u8 *filter_index,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 3a237c3d0dcb..afe2539b49d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -381,9 +381,18 @@ struct i40e_fc_info {
 #define I40E_MAX_USER_PRIORITY		8
 #define I40E_DCBX_MAX_APPS		32
 #define I40E_LLDPDU_SIZE		1500
+#define I40E_TLV_STATUS_OPER		0x1
+#define I40E_TLV_STATUS_SYNC		0x2
+#define I40E_TLV_STATUS_ERR		0x4
+#define I40E_CEE_OPER_MAX_APPS		3
+#define I40E_APP_PROTOID_FCOE		0x8906
+#define I40E_APP_PROTOID_ISCSI		0x0cbc
+#define I40E_APP_PROTOID_FIP		0x8914
+#define I40E_APP_SEL_ETHTYPE		0x1
+#define I40E_APP_SEL_TCPIP		0x2
 
-/* IEEE 802.1Qaz ETS Configuration data */
-struct i40e_ieee_ets_config {
+/* CEE or IEEE 802.1Qaz ETS Configuration data */
+struct i40e_dcb_ets_config {
 	u8 willing;
 	u8 cbs;
 	u8 maxtcs;
@@ -392,34 +401,30 @@ struct i40e_ieee_ets_config {
 	u8 tsatable[I40E_MAX_TRAFFIC_CLASS];
 };
 
-/* IEEE 802.1Qaz ETS Recommendation data */
-struct i40e_ieee_ets_recommend {
-	u8 prioritytable[I40E_MAX_TRAFFIC_CLASS];
-	u8 tcbwtable[I40E_MAX_TRAFFIC_CLASS];
-	u8 tsatable[I40E_MAX_TRAFFIC_CLASS];
-};
-
-/* IEEE 802.1Qaz PFC Configuration data */
-struct i40e_ieee_pfc_config {
+/* CEE or IEEE 802.1Qaz PFC Configuration data */
+struct i40e_dcb_pfc_config {
 	u8 willing;
 	u8 mbc;
 	u8 pfccap;
 	u8 pfcenable;
 };
 
-/* IEEE 802.1Qaz Application Priority data */
-struct i40e_ieee_app_priority_table {
+/* CEE or IEEE 802.1Qaz Application Priority data */
+struct i40e_dcb_app_priority_table {
 	u8  priority;
 	u8  selector;
 	u16 protocolid;
 };
 
 struct i40e_dcbx_config {
+	u8  dcbx_mode;
+#define I40E_DCBX_MODE_CEE	0x1
+#define I40E_DCBX_MODE_IEEE	0x2
 	u32 numapps;
-	struct i40e_ieee_ets_config etscfg;
-	struct i40e_ieee_ets_recommend etsrec;
-	struct i40e_ieee_pfc_config pfc;
-	struct i40e_ieee_app_priority_table app[I40E_DCBX_MAX_APPS];
+	struct i40e_dcb_ets_config etscfg;
+	struct i40e_dcb_ets_config etsrec;
+	struct i40e_dcb_pfc_config pfc;
+	struct i40e_dcb_app_priority_table app[I40E_DCBX_MAX_APPS];
 };
 
 /* Port hardware description */

From e1c4751ee22f5d5f6f6cfcb70614e18e4218892e Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:30 +0000
Subject: [PATCH 06/11] i40e: Check for LLDP AdminStatus before querying DCBX

This patch adds a check whether LLDP Agent's default AdminStatus is
enabled or disabled on a given port. If it is disabled then it sets
the DCBX status to disabled as well; and would not query firmware for
any DCBX configuration data.

Change-ID: I73c0b9f0adbf4cae177d14914b20a48c9a8f50fd
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_dcb.c    | 49 +++++++++++++++++++
 .../net/ethernet/intel/i40e/i40e_prototype.h  |  2 +
 drivers/net/ethernet/intel/i40e/i40e_type.h   | 12 +++++
 3 files changed, 63 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
index 1396c70b871c..3ce43588592d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
@@ -640,10 +640,27 @@ out:
 i40e_status i40e_init_dcb(struct i40e_hw *hw)
 {
 	i40e_status ret = 0;
+	struct i40e_lldp_variables lldp_cfg;
+	u8 adminstatus = 0;
 
 	if (!hw->func_caps.dcb)
 		return ret;
 
+	/* Read LLDP NVM area */
+	ret = i40e_read_lldp_cfg(hw, &lldp_cfg);
+	if (ret)
+		return ret;
+
+	/* Get the LLDP AdminStatus for the current port */
+	adminstatus = lldp_cfg.adminstatus >> (hw->port * 4);
+	adminstatus &= 0xF;
+
+	/* LLDP agent disabled */
+	if (!adminstatus) {
+		hw->dcbx_status = I40E_DCBX_STATUS_DISABLED;
+		return ret;
+	}
+
 	/* Get DCBX status */
 	ret = i40e_get_dcbx_status(hw, &hw->dcbx_status);
 	if (ret)
@@ -655,6 +672,8 @@ i40e_status i40e_init_dcb(struct i40e_hw *hw)
 	case I40E_DCBX_STATUS_IN_PROGRESS:
 		/* Get current DCBX configuration */
 		ret = i40e_get_dcb_config(hw);
+		if (ret)
+			return ret;
 		break;
 	case I40E_DCBX_STATUS_DISABLED:
 		return ret;
@@ -671,3 +690,33 @@ i40e_status i40e_init_dcb(struct i40e_hw *hw)
 
 	return ret;
 }
+
+/**
+ * i40e_read_lldp_cfg - read LLDP Configuration data from NVM
+ * @hw: pointer to the HW structure
+ * @lldp_cfg: pointer to hold lldp configuration variables
+ *
+ * Reads the LLDP configuration data from NVM
+ **/
+i40e_status i40e_read_lldp_cfg(struct i40e_hw *hw,
+			       struct i40e_lldp_variables *lldp_cfg)
+{
+	i40e_status ret = 0;
+	u32 offset = (2 * I40E_NVM_LLDP_CFG_PTR);
+
+	if (!lldp_cfg)
+		return I40E_ERR_PARAM;
+
+	ret = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (ret)
+		goto err_lldp_cfg;
+
+	ret = i40e_aq_read_nvm(hw, I40E_SR_EMP_MODULE_PTR, offset,
+			       sizeof(struct i40e_lldp_variables),
+			       (u8 *)lldp_cfg,
+			       true, NULL);
+	i40e_release_nvm(hw);
+
+err_lldp_cfg:
+	return ret;
+}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 24bdc4333dc6..2fb4306597e8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -235,6 +235,8 @@ i40e_status i40e_aq_query_switch_comp_bw_config(struct i40e_hw *hw,
 		struct i40e_asq_cmd_details *cmd_details);
 i40e_status i40e_aq_resume_port_tx(struct i40e_hw *hw,
 				   struct i40e_asq_cmd_details *cmd_details);
+i40e_status i40e_read_lldp_cfg(struct i40e_hw *hw,
+			       struct i40e_lldp_variables *lldp_cfg);
 /* i40e_common */
 i40e_status i40e_init_shared_code(struct i40e_hw *hw);
 i40e_status i40e_pf_reset(struct i40e_hw *hw);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index afe2539b49d6..c85214373a51 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -1377,6 +1377,18 @@ enum i40e_reset_type {
 	I40E_RESET_EMPR		= 3,
 };
 
+/* IEEE 802.1AB LLDP Agent Variables from NVM */
+#define I40E_NVM_LLDP_CFG_PTR		0xD
+struct i40e_lldp_variables {
+	u16 length;
+	u16 adminstatus;
+	u16 msgfasttx;
+	u16 msgtxinterval;
+	u16 txparams;
+	u16 timers;
+	u16 crc8;
+};
+
 /* RSS Hash Table Size */
 #define I40E_PFQF_CTL_0_HASHLUTSIZE_512	0x00010000
 #endif /* _I40E_TYPE_H_ */

From 23cd1f095adf110d118ef972914c714176cd48d0 Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:41 +0000
Subject: [PATCH 07/11] i40e: Update VEB's enabled_tc after reconfiguration

When the port TC configuration changes as a result of DCBx the driver
modifies the enabled TCs for the VEBs it manages. But, in the process
it did not update the enabled_tc value that it caches on a per VEB basis.

So, when the next reconfiguration event occurs where the number of TC
value is same as the value cached in enabled_tc for a given VEB; driver
does not modify it's TC configuration by calling appropriate AQ command
believing it is running with the same configuration as requested.
Now, as the VEB is not actually enabled for the TCs that are there any
TC configuration command for VSI attached to that VEB with TCs that are
not enabled for the VEB fails.

This patch fixes this issue.

Change-ID: Ife5694469b05494228e0d850429ea1734738cf29
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 99b985cb53d5..71ab3277a295 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8279,6 +8279,7 @@ static int i40e_veb_get_bw_info(struct i40e_veb *veb)
 	veb->bw_limit = le16_to_cpu(ets_data.port_bw_limit);
 	veb->bw_max_quanta = ets_data.tc_bw_max;
 	veb->is_abs_credits = bw_data.absolute_credits_enable;
+	veb->enabled_tc = ets_data.tc_valid_bits;
 	tc_bw_max = le16_to_cpu(bw_data.tc_bw_max[0]) |
 		    (le16_to_cpu(bw_data.tc_bw_max[1]) << 16);
 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {

From 69129dc39fac45e0ea1dbbca995abdac279df376 Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:46 +0000
Subject: [PATCH 08/11] i40e: Modify Tx disable wait flow in case of DCB
 reconfiguration

When DCB TC configuration changes the firmware suspends the port's Tx.
Now, as DCB TCs may have changed the PF driver tries to reconfigure the
TC configuration of the VSIs it manages. As part of this process it disables
the VSI queues but the Tx queue disable will not complete as the port's
Tx has been suspended. So, waiting for Tx queues to go to disable state
in this flow may lead to detection of Tx queue disable timeout errors.

Hence, this patch adds a new PF state so that if a port's Tx is in
suspended state the Tx queue disable flow would just put the request for
the queue to be disabled and return without waiting for the queue to be
actually disabled.
Once the VSI(s) TC reconfiguration has been done and driver has called
firmware AQC "Resume PF Traffic" the driver checks the Tx queues requested
to be disabled are actually disabled before re-enabling them again.

Change-ID: If3e03ce4813a4e342dbd5a1eb1d2861e952b7544
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c | 60 +++++++++++++++++++++
 2 files changed, 61 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index b7a807b380d7..464342a35214 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -146,6 +146,7 @@ enum i40e_state_t {
 	__I40E_DOWN_REQUESTED,
 	__I40E_FD_FLUSH_REQUESTED,
 	__I40E_RESET_FAILED,
+	__I40E_PORT_TX_SUSPENDED,
 };
 
 enum i40e_interrupt_policy {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 71ab3277a295..3e55cef3176f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3492,6 +3492,9 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 		}
 
 		wr32(hw, I40E_QTX_ENA(pf_q), tx_reg);
+		/* No waiting for the Tx queue to disable */
+		if (!enable && test_bit(__I40E_PORT_TX_SUSPENDED, &pf->state))
+			continue;
 
 		/* wait for the change to finish */
 		ret = i40e_pf_txq_wait(pf, pf_q, enable);
@@ -3911,6 +3914,56 @@ static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf)
 	}
 }
 
+#ifdef CONFIG_I40E_DCB
+/**
+ * i40e_vsi_wait_txq_disabled - Wait for VSI's queues to be disabled
+ * @vsi: the VSI being configured
+ *
+ * This function waits for the given VSI's Tx queues to be disabled.
+ **/
+static int i40e_vsi_wait_txq_disabled(struct i40e_vsi *vsi)
+{
+	struct i40e_pf *pf = vsi->back;
+	int i, pf_q, ret;
+
+	pf_q = vsi->base_queue;
+	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
+		/* Check and wait for the disable status of the queue */
+		ret = i40e_pf_txq_wait(pf, pf_q, false);
+		if (ret) {
+			dev_info(&pf->pdev->dev,
+				 "%s: VSI seid %d Tx ring %d disable timeout\n",
+				 __func__, vsi->seid, pf_q);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * i40e_pf_wait_txq_disabled - Wait for all queues of PF VSIs to be disabled
+ * @pf: the PF
+ *
+ * This function waits for the Tx queues to be in disabled state for all the
+ * VSIs that are managed by this PF.
+ **/
+static int i40e_pf_wait_txq_disabled(struct i40e_pf *pf)
+{
+	int v, ret = 0;
+
+	for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
+		if (pf->vsi[v]) {
+			ret = i40e_vsi_wait_txq_disabled(pf->vsi[v]);
+			if (ret)
+				break;
+		}
+	}
+
+	return ret;
+}
+
+#endif
 /**
  * i40e_dcb_get_num_tc -  Get the number of TCs from DCBx config
  * @dcbcfg: the corresponding DCBx configuration structure
@@ -5102,6 +5155,7 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 	else
 		pf->flags &= ~I40E_FLAG_DCB_ENABLED;
 
+	set_bit(__I40E_PORT_TX_SUSPENDED, &pf->state);
 	/* Reconfiguration needed quiesce all VSIs */
 	i40e_pf_quiesce_all_vsi(pf);
 
@@ -5110,7 +5164,13 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 
 	ret = i40e_resume_port_tx(pf);
 
+	clear_bit(__I40E_PORT_TX_SUSPENDED, &pf->state);
 	/* In case of error no point in resuming VSIs */
+	if (ret)
+		goto exit;
+
+	/* Wait for the PF's Tx queues to be disabled */
+	ret = i40e_pf_wait_txq_disabled(pf);
 	if (!ret)
 		i40e_pf_unquiesce_all_vsi(pf);
 exit:

From d341b7a52be79520f8e8b1ed0e3df657b2442e5b Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:51 +0000
Subject: [PATCH 09/11] i40e: Do not disable/enable FCoE VSI with DCB reconfig

FCoE VSI Tx queue disable times out when reconfiguring as a result of
DCB TC configuration change event.

The hardware allows us to skip disabling and enabling of Tx queues for
VSIs with single TC enabled. As FCoE VSI is configured to have only
single TC we skip it from disable/enable flow.

Change-ID: Ia73ff3df8785ba2aa3db91e6f2c9005e61ebaec2
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3e55cef3176f..c3107dca24da 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3862,6 +3862,15 @@ static void i40e_quiesce_vsi(struct i40e_vsi *vsi)
 	if (test_bit(__I40E_DOWN, &vsi->state))
 		return;
 
+	/* No need to disable FCoE VSI when Tx suspended */
+	if ((test_bit(__I40E_PORT_TX_SUSPENDED, &vsi->back->state)) &&
+	    vsi->type == I40E_VSI_FCOE) {
+		dev_dbg(&vsi->back->pdev->dev,
+			"%s: VSI seid %d skipping FCoE VSI disable\n",
+			 __func__, vsi->seid);
+		return;
+	}
+
 	set_bit(__I40E_NEEDS_RESTART, &vsi->state);
 	if (vsi->netdev && netif_running(vsi->netdev)) {
 		vsi->netdev->netdev_ops->ndo_stop(vsi->netdev);
@@ -3953,7 +3962,8 @@ static int i40e_pf_wait_txq_disabled(struct i40e_pf *pf)
 	int v, ret = 0;
 
 	for (v = 0; v < pf->hw.func_caps.num_vsis; v++) {
-		if (pf->vsi[v]) {
+		/* No need to wait for FCoE VSI queues */
+		if (pf->vsi[v] && pf->vsi[v]->type != I40E_VSI_FCOE) {
 			ret = i40e_vsi_wait_txq_disabled(pf->vsi[v]);
 			if (ret)
 				break;

From 4b7698cb95638693e3d9a2fc01a2bdbd8710ff81 Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:18:57 +0000
Subject: [PATCH 10/11] i40e: Prevent link flow control settings when PFC is
 enabled

When PFC is enabled we should not proceed with setting the link flow control
parameters.  Also, always report the link flow Tx/Rx settings as off when
PFC is enabled.

Change-ID: Ib09ec58afdf0b2e587ac9d8851a5c80ad58206c4
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index afad5aa5a12b..bb1698a7b3d1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -644,11 +644,19 @@ static void i40e_get_pauseparam(struct net_device *netdev,
 	struct i40e_pf *pf = np->vsi->back;
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
 
 	pause->autoneg =
 		((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
 		  AUTONEG_ENABLE : AUTONEG_DISABLE);
 
+	/* PFC enabled so report LFC as off */
+	if (dcbx_cfg->pfc.pfcenable) {
+		pause->rx_pause = 0;
+		pause->tx_pause = 0;
+		return;
+	}
+
 	if (hw->fc.current_mode == I40E_FC_RX_PAUSE) {
 		pause->rx_pause = 1;
 	} else if (hw->fc.current_mode == I40E_FC_TX_PAUSE) {
@@ -672,6 +680,7 @@ static int i40e_set_pauseparam(struct net_device *netdev,
 	struct i40e_vsi *vsi = np->vsi;
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+	struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
 	bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
 	i40e_status status;
 	u8 aq_failures;
@@ -693,8 +702,9 @@ static int i40e_set_pauseparam(struct net_device *netdev,
 		netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n");
 	}
 
-	if (hw->fc.current_mode == I40E_FC_PFC) {
-		netdev_info(netdev, "Priority flow control enabled. Cannot set link flow control.\n");
+	if (dcbx_cfg->pfc.pfcenable) {
+		netdev_info(netdev,
+			    "Priority flow control enabled. Cannot set link flow control.\n");
 		return -EOPNOTSUPP;
 	}
 

From 3ffa037d7f78ceb25115eda29176c2bd2844866f Mon Sep 17 00:00:00 2001
From: Neerav Parikh <neerav.parikh@intel.com>
Date: Wed, 12 Nov 2014 00:19:02 +0000
Subject: [PATCH 11/11] i40e: Set XPS bit mask to zero in DCB mode

Due to DCBX configuration change if the VSI needs to use more than 1 TC;
it needs to disable the XPS maps that were set when operating in 1 TC mode.
Without disabling XPS the netdev layer will select queues based on those
settings and not use the TC queue mapping to make the queue selection.

This patch allows the driver to enable/disable the XPS based on the number
of TCs being enabled for the given VSI.

Change-ID: Idc4dec47a672d2a509f6d7fe11ed1ee65b4f0e08
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 38 +++++++++++++++++----
 1 file changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c3107dca24da..c998d82da0fc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2381,6 +2381,35 @@ static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
 #endif
 }
 
+/**
+ * i40e_config_xps_tx_ring - Configure XPS for a Tx ring
+ * @ring: The Tx ring to configure
+ *
+ * This enables/disables XPS for a given Tx descriptor ring
+ * based on the TCs enabled for the VSI that ring belongs to.
+ **/
+static void i40e_config_xps_tx_ring(struct i40e_ring *ring)
+{
+	struct i40e_vsi *vsi = ring->vsi;
+	cpumask_var_t mask;
+
+	if (ring->q_vector && ring->netdev) {
+		/* Single TC mode enable XPS */
+		if (vsi->tc_config.numtc <= 1 &&
+		    !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state)) {
+			netif_set_xps_queue(ring->netdev,
+					    &ring->q_vector->affinity_mask,
+					    ring->queue_index);
+		} else if (alloc_cpumask_var(&mask, GFP_KERNEL)) {
+			/* Disable XPS to allow selection based on TC */
+			bitmap_zero(cpumask_bits(mask), nr_cpumask_bits);
+			netif_set_xps_queue(ring->netdev, mask,
+					    ring->queue_index);
+			free_cpumask_var(mask);
+		}
+	}
+}
+
 /**
  * i40e_configure_tx_ring - Configure a transmit ring context and rest
  * @ring: The Tx ring to configure
@@ -2404,13 +2433,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)
 		ring->atr_sample_rate = 0;
 	}
 
-	/* initialize XPS */
-	if (ring->q_vector && ring->netdev &&
-	    vsi->tc_config.numtc <= 1 &&
-	    !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state))
-		netif_set_xps_queue(ring->netdev,
-				    &ring->q_vector->affinity_mask,
-				    ring->queue_index);
+	/* configure XPS */
+	i40e_config_xps_tx_ring(ring);
 
 	/* clear the context structure first */
 	memset(&tx_ctx, 0, sizeof(tx_ctx));