renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code

drm/i915/gen9_lp: Increase DDI PHY0 power well enabling timeout

Browse Source 
On GLK sporadic timeouts occur during PHY0 enabling. Based on logs it looks
like they happen sometime after a system suspend/resume cycle, with the
same power well enabling succeeding both before and after the failed
one and no other problems observed. The current timeout in the code is
not actually specified by BSpec, so let's try to increase that until a
BSpec update.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409122716.4055-1-imre.deak@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This commit is contained in:
Imre Deak 2018-04-09 15:27:16 +03:00
parent 8b69449d26
commit 1b85147b4b
1 changed files with 6 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/gpu/drm/i915/intel_dpio_phy.c
View File

@ -380,13 +380,14 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
* all 1s. Eventually they become accessible as they power up, then
* the reserved bit will give the default 0. Poll on the reserved bit
* becoming 0 to find when the PHY is accessible.
* HW team confirmed that the time to reach phypowergood status is
* anywhere between 50 us and 100us.
* The flag should get set in 100us according to the HW team, but
* use 1ms due to occasional timeouts observed with that.
*/
if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
(PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) {
if (intel_wait_for_register_fw(dev_priv, BXT_PORT_CL1CM_DW0(phy),
PHY_RESERVED | PHY_POWER_GOOD,
PHY_POWER_GOOD,
1))
DRM_ERROR("timeout during PHY%d power on\n", phy);
}
/* Program PLL Rcomp code offset */
val = I915_READ(BXT_PORT_CL1CM_DW9(phy));