renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
Code

MIPS: Alchemy: remove get/set_au1x00_lcd_clock().

Browse Source 
There are no in-tree users, so remove them.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Manuel Lauss 2008-12-21 09:26:20 +01:00 committed by Ralf Baechle
parent 558d1de8ba
commit 1820ec1d2b
3 changed files with 0 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
arch/mips/alchemy/common/clocks.c
View File

@ -30,7 +30,6 @@
#include <asm/mach-au1x00/au1000.h>
static unsigned int au1x00_clock; /* Hz */
static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
/*
@ -61,33 +60,3 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
{
uart_baud_base = new_baud_base;
}
/*
* Calculate the Au1x00's LCD clock based on the current
* cpu clock and the system bus clock, and try to keep it
* below 40 MHz (the Pb1000 board can lock-up if the LCD
* clock is over 40 MHz).
*/
void set_au1x00_lcd_clock(void)
{
unsigned int static_cfg0;
unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
static_cfg0 = au_readl(MEM_STCFG0);
if (static_cfg0 & (1 << 11))
lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
else
lcd_clock = sys_busclk / 4;
if (lcd_clock > 50000) /* Epson MAX */
printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
lcd_clock);
}
unsigned int get_au1x00_lcd_clock(void)
{
return lcd_clock;
}
EXPORT_SYMBOL(get_au1x00_lcd_clock);

1
arch/mips/alchemy/common/time.c
View File

@ -224,7 +224,6 @@ void __init plat_time_init(void)
printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
set_au1x00_speed(est_freq);
set_au1x00_lcd_clock(); /* program the LCD clock */
#ifdef CONFIG_PM
/*

2
arch/mips/include/asm/mach-au1x00/au1000.h
View File

@ -97,8 +97,6 @@ extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
extern unsigned long get_au1x00_uart_baud_base(void);
extern void set_au1x00_lcd_clock(void);
extern unsigned int get_au1x00_lcd_clock(void);
/*
* Every board describes its IRQ mapping with this table.