diff --git a/drivers/staging/rtl8192su/Makefile b/drivers/staging/rtl8192su/Makefile
index 02d4614418ab..58073da4855d 100644
--- a/drivers/staging/rtl8192su/Makefile
+++ b/drivers/staging/rtl8192su/Makefile
@@ -12,7 +12,6 @@ EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1
 EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
 EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1
 
-EXTRA_CFLAGS += -DRTL8192SU_ASIC_VERIFICATION
 EXTRA_CFLAGS += -DRTL8192SU_USB_PHY_TEST=0
 
 #EXTRA_CFLAGS += -DMUTIPLE_BULK_OUT
diff --git a/drivers/staging/rtl8192su/r8192S_firmware.c b/drivers/staging/rtl8192su/r8192S_firmware.c
index 287927b2dbb5..8ca173eab04f 100644
--- a/drivers/staging/rtl8192su/r8192S_firmware.c
+++ b/drivers/staging/rtl8192su/r8192S_firmware.c
@@ -320,12 +320,10 @@ FirmwareCheckReady(struct net_device *dev,	u8 LoadFWStatus)
 
 		RT_TRACE(COMP_FIRMWARE, "FirmwareCheckReady(): Current RCR settings(%#x)\n", tmpU4b);
 
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 #ifdef NOT_YET   //YJ,TMP
 		priv->TransmitConfig = read_nic_dword(dev, TCR);
 		RT_TRACE(COMP_FIRMWARE, "FirmwareCheckReady(): Current TCR settings(%x)\n", priv->TransmitConfig);
 		pHalData->FwRsvdTxPageCfg = read_nic_byte(dev, FW_RSVD_PG_CRTL);
-#endif
 #endif
 
 		// Set to normal mode.
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 37abb6811760..55aeaf6ce2da 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -2957,9 +2957,7 @@ short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb)
 	memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
 
 
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 		tx_desc->NonQos = (IsQoSDataFrame(skb->data)==TRUE)? 0:1;
-#endif
 
 	/* Fill Tx descriptor */
 	//memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
@@ -4029,9 +4027,7 @@ bool GetNmodeSupportBySecCfg8192(struct net_device*dev)
         int wpa_ie_len= ieee->wpa_ie_len;
         struct ieee80211_crypt_data* crypt;
         int encrypt;
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 	return TRUE;
-#endif
 
         crypt = ieee->crypt[ieee->tx_keyidx];
 	//we use connecting AP's capability instead of only security config on our driver to distinguish whether it should use N mode or G mode
@@ -4883,13 +4879,9 @@ static void rtl8192SU_ReadAdapterInfo8192SEEPROM(struct net_device* dev)
 	RT_TRACE(COMP_EPROM, "MAC addr:"MAC_FMT"\n", MAC_ARG(dev->dev_addr));
 
 	priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 	priv->rf_chip = RF_6052;
 	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
 	//priv->card_8192_version = VERSION_8192SU_A; //Over write for temporally experiment. 2008.10.16. By Roger.
-#else
-	priv->rf_chip = RF_8256;
-#endif
 
 	{
 #if 0
@@ -5215,12 +5207,8 @@ rtl8192SU_ReadAdapterInfo8192SEFuse(struct net_device* dev)
 	// 2007/11/15 MH For RTL8192USB we assign as 1T2R now.
 	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;	// default : 1T2R
 
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 	priv->rf_chip = RF_6052;
 	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
-#else
-	priv->rf_chip = RF_8256;
-#endif
 
 	{
 		//
@@ -5660,11 +5648,7 @@ rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
 	//	priv->rf_type = RF_1T2R;
 	//}
 
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 	priv->rf_chip = RF_6052;
-#else
-	priv->rf_chip = RF_8256;
-#endif
 
 	priv->rf_chip = RF_6052;//lzm test
 	RT_TRACE(COMP_INIT, "BoardType = 0x%2x\n", priv->EEPROMBoardType);
@@ -7778,9 +7762,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
 	RESET_TYPE	RxResetType = RESET_TYPE_NORESET;
 	RT_RF_POWER_STATE 	rfState;
 
-#if defined (RTL8192SU_ASIC_VERIFICATION)
 	return RESET_TYPE_NORESET;
-#endif
 
 	rfState = priv->ieee80211->eRFPowerState;