2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-09 13:54:00 +08:00

regulator: core: Add support for disabling ramp delay

Some hardwares support disabling ramp delay, so adding ramp_disable flag to
constraints. It will be used to figure out whether ramp_delay in constraints
is explicitly set to zero or its unintialized (zero by default).
And we don't need to call set_voltage_time_sel() for regulators for whom ramp
delay is disabled in constraints.

Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Yadwinder Singh Brar 2013-06-29 18:21:15 +05:30 committed by Mark Brown
parent ad81f0545e
commit 1653ccf4c5
4 changed files with 16 additions and 5 deletions

View File

@ -12,6 +12,8 @@ Optional properties:
- regulator-allow-bypass: allow the regulator to go into bypass mode
- <name>-supply: phandle to the parent supply/regulator node
- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
For hardwares which support disabling ramp rate, it should be explicitly
intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple

View File

@ -984,7 +984,8 @@ static int set_machine_constraints(struct regulator_dev *rdev,
}
}
if (rdev->constraints->ramp_delay && ops->set_ramp_delay) {
if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
&& ops->set_ramp_delay) {
ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
if (ret < 0) {
rdev_err(rdev, "failed to set ramp_delay\n");
@ -2438,7 +2439,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
}
/* Call set_voltage_time_sel if successfully obtained old_selector */
if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
if (ret == 0 && !rdev->constraints->ramp_disable &&
_regulator_is_enabled(rdev) && old_selector >= 0 &&
old_selector != selector && rdev->desc->ops->set_voltage_time_sel) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,

View File

@ -21,6 +21,7 @@ static void of_get_regulation_constraints(struct device_node *np,
{
const __be32 *min_uV, *max_uV, *uV_offset;
const __be32 *min_uA, *max_uA, *ramp_delay;
struct property *prop;
struct regulation_constraints *constraints = &(*init_data)->constraints;
constraints->name = of_get_property(np, "regulator-name", NULL);
@ -64,9 +65,14 @@ static void of_get_regulation_constraints(struct device_node *np,
if (of_property_read_bool(np, "regulator-allow-bypass"))
constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
ramp_delay = of_get_property(np, "regulator-ramp-delay", NULL);
if (ramp_delay)
constraints->ramp_delay = be32_to_cpu(*ramp_delay);
prop = of_find_property(np, "regulator-ramp-delay", NULL);
if (prop && prop->value) {
ramp_delay = prop->value;
if (*ramp_delay)
constraints->ramp_delay = be32_to_cpu(*ramp_delay);
else
constraints->ramp_disable = true;
}
}
/**

View File

@ -134,6 +134,7 @@ struct regulation_constraints {
unsigned always_on:1; /* regulator never off when system is on */
unsigned boot_on:1; /* bootloader/firmware enabled regulator */
unsigned apply_uV:1; /* apply uV constraint if min == max */
unsigned ramp_disable:1; /* disable ramp delay */
};
/**