renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-19 16:14:13 +08:00
Code

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

Browse Source 
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (28 commits)
  Blackfin arch: SPI_MMC is now mainlined MMC_SPI
  Blackfin arch: disable legacy /proc/scsi/ support by default
  Blackfin arch: remove duplicated ANOMALY_05000448 ifdef check
  Blackfin arch: add stubs for anomalies 447 and 448
  Blackfin arch: cleanup bfin_sport.h header and export it to userspace
  Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently
  Blackfin arch: remove spurious dash when dcache is off
  Blackfin arch: mark init_pda as __init as only __init funcs all it
  Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup from "mem"
  Blackfin arch: Random read/write errors are a bad thing
  Blackfin arch: update default kernel config, select KSZ8893M driver for BF518
  Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit
  Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled
  Blackfin arch: make sure people do not set the kernel load address too high
  Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5
  Blackfin arch: update anomaly sheets to match latest public info
  Blackfin arch: Fix BUG - kernel fails to build in pm.c when allow wakeup fromi standby by GPIO
  Blackfin arch: PM_BFIN_WAKE_GP: update help
  Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch
  Blackfin arch: Enable Write Back Cache on all Blackfin Boards
  ...
This commit is contained in:
Linus Torvalds 2009-03-08 10:24:39 -07:00
commit 1401689996
73 changed files with 609 additions and 1603 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/blackfin/Kconfig
View File

@ -1129,6 +1129,7 @@ endchoice
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
(all processors, except ADSP-BF549). This option sets
the general-purpose wake-up enable (GPWE) control bit to enable
wake-up upon detection of an active low signal on the /GPW (PH7) pin.
On ADSP-BF549 this option enables the the same functionality on the
/MRXON pin also PH7.
endmenu
menu "CPU Frequency scaling"

6
arch/blackfin/Kconfig.debug
View File

@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
config HAVE_ARCH_KGDB
def_bool y
config KGDB_TESTCASE
tristate "KGDB: for test case in expect"
default n
help
This is a kgdb test case for automated testing.
config DEBUG_VERBOSE
bool "Verbose fault messages"
default y

63
arch/blackfin/configs/BF518F-EZBRD_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Fri Jan 9 17:58:41 2009
# Linux kernel version: 2.6.28
# Fri Feb 20 10:01:44 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@ -133,10 +133,15 @@ CONFIG_BF518=y
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_TAG_STPID=y
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_NET_DSA_KSZ8893M=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BITBANG is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set

4
arch/blackfin/configs/BF527-EZKIT_defconfig
View File

@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#

4
arch/blackfin/configs/BF533-EZKIT_defconfig
View File

@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#

4
arch/blackfin/configs/BF533-STAMP_defconfig
View File

@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#

14
arch/blackfin/configs/BF537-STAMP_defconfig
View File

@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_BFIN is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#

4
arch/blackfin/configs/BF538-EZKIT_defconfig
View File

@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#

6
arch/blackfin/configs/BF548-EZKIT_defconfig
View File

@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
@ -680,7 +680,7 @@ CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)

4
arch/blackfin/configs/BF561-EZKIT_defconfig
View File

@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set

4
arch/blackfin/configs/BlackStamp_defconfig
View File

@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#

4
arch/blackfin/configs/CM-BF527_defconfig
View File

@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#

6
arch/blackfin/configs/CM-BF548_defconfig
View File

@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
# CONFIG_MPU is not set
@ -595,7 +595,7 @@ CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)

2
arch/blackfin/configs/IP0X_defconfig
View File

@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)

4
arch/blackfin/configs/SRV1_defconfig
View File

@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_BFIN_WB=y
# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
#

1
arch/blackfin/include/asm/Kbuild
View File

@ -1,3 +1,4 @@
include include/asm-generic/Kbuild.asm
unifdef-y += bfin_sport.h
unifdef-y += fixed_code.h

45
arch/blackfin/include/asm/bfin_sport.h
View File

@ -1,30 +1,9 @@
/*
* File: include/asm-blackfin/bfin_sport.h
* Based on:
* Author: Roy Huang (roy.huang@analog.com)
* bfin_sport.h - userspace header for bfin sport driver
*
* Created: Thu Aug. 24 2006
* Description:
* Copyright 2004-2008 Analog Devices Inc.
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_SPORT_H__
@ -42,11 +21,10 @@
#define NORM_FORMAT 0x0
#define ALAW_FORMAT 0x2
#define ULAW_FORMAT 0x3
struct sport_register;
/* Function driver which use sport must initialize the structure */
struct sport_config {
/*TDM (multichannels), I2S or other mode */
/* TDM (multichannels), I2S or other mode */
unsigned int mode:3;
/* if TDM mode is selected, channels must be set */
@ -72,12 +50,18 @@ struct sport_config {
int serial_clk;
int fsync_clk;
unsigned int data_format:2; /*Normal, u-law or a-law */
unsigned int data_format:2; /* Normal, u-law or a-law */
int word_len; /* How length of the word in bits, 3-32 bits */
int dma_enabled;
};
/* Userspace interface */
#define SPORT_IOC_MAGIC 'P'
#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
#ifdef __KERNEL__
struct sport_register {
unsigned short tcr1;
unsigned short reserved0;
@ -117,9 +101,6 @@ struct sport_register {
unsigned long mrcs3;
};
#define SPORT_IOC_MAGIC 'P'
#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
struct sport_dev {
struct cdev cdev; /* Char device structure */
@ -149,6 +130,8 @@ struct sport_dev {
struct sport_config config;
};
#endif
#define SPORT_TCR1 0
#define SPORT_TCR2 1
#define SPORT_TCLKDIV 2
@ -169,4 +152,4 @@ struct sport_dev {
#define SPORT_MRCS2 22
#define SPORT_MRCS3 23
#endif /*__BFIN_SPORT_H__*/
#endif

100
arch/blackfin/include/asm/ipipe.h
View File

@ -35,9 +35,9 @@
#include <asm/atomic.h>
#include <asm/traps.h>
#define IPIPE_ARCH_STRING "1.8-00"
#define IPIPE_ARCH_STRING "1.9-00"
#define IPIPE_MAJOR_NUMBER 1
#define IPIPE_MINOR_NUMBER 8
#define IPIPE_MINOR_NUMBER 9
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
@ -83,9 +83,9 @@ struct ipipe_sysinfo {
"%2 = CYCLES2\n" \
"CC = %2 == %0\n" \
"if ! CC jump 1b\n" \
: "=r" (((unsigned long *)&t)[1]), \
"=r" (((unsigned long *)&t)[0]), \
"=r" (__cy2) \
: "=d,a" (((unsigned long *)&t)[1]), \
"=d,a" (((unsigned long *)&t)[0]), \
"=d,a" (__cy2) \
: /*no input*/ : "CC"); \
t; \
})
@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq))
#define __ipipe_lock_root() \
set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
static inline int __ipipe_check_tickdev(const char *devname)
{
return 1;
}
#define __ipipe_unlock_root() \
clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
static inline void __ipipe_lock_root(void)
{
set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
}
static inline void __ipipe_unlock_root(void)
{
clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
}
void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
#define __ipipe_sync_pipeline(syncmask) \
do { \
struct ipipe_domain *ipd = ipipe_current_domain; \
if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
__ipipe_sync_stage(syncmask); \
} while (0)
#define __ipipe_sync_pipeline ___ipipe_sync_pipeline
void ___ipipe_sync_pipeline(unsigned long syncmask);
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
int __ipipe_get_irq_priority(unsigned irq);
int __ipipe_get_irqthread_priority(unsigned irq);
void __ipipe_stall_root_raw(void);
void __ipipe_unstall_root_raw(void);
void __ipipe_serial_debug(const char *fmt, ...);
asmlinkage void __ipipe_call_irqtail(unsigned long addr);
DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
extern unsigned long __ipipe_core_clock;
@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
#define __ipipe_run_irqtail() /* Must be a macro */ \
do { \
asmlinkage void __ipipe_call_irqtail(void); \
unsigned long __pending; \
CSYNC(); \
CSYNC(); \
__pending = bfin_read_IPEND(); \
if (__pending & 0x8000) { \
__pending &= ~0x8010; \
if (__pending && (__pending & (__pending - 1)) == 0) \
__ipipe_call_irqtail(); \
__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
} \
} while (0)
#define __ipipe_run_isr(ipd, irq) \
do { \
if (ipd == ipipe_root_domain) { \
/* \
* Note: the I-pipe implements a threaded interrupt model on \
* this arch for Linux external IRQs. The interrupt handler we \
* call here only wakes up the associated IRQ thread. \
*/ \
if (ipipe_virtual_irq_p(irq)) { \
/* No irqtail here; virtual interrupts have no effect \
on IPEND so there is no need for processing \
deferral. */ \
local_irq_enable_nohead(ipd); \
local_irq_enable_hw(); \
if (ipipe_virtual_irq_p(irq)) \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
local_irq_disable_nohead(ipd); \
} else \
/* \
* No need to run the irqtail here either; \
* we can't be preempted by hw IRQs, so \
* non-Linux IRQs cannot stack over the short \
* thread wakeup code. Which in turn means \
* that no irqtail condition could be pending \
* for domains above Linux in the pipeline. \
*/ \
else \
ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
local_irq_disable_hw(); \
} else { \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
local_irq_enable_nohead(ipd); \
@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
#ifdef CONFIG_GENERIC_CLOCKEVENTS
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
#endif
#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
#define PRIO_GPIODEMUX(irq) CONFIG_PFA
#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA
#elif defined(CONFIG_BF52x)
#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
(irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
(irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-1)
#elif defined(CONFIG_BF561)
#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
(irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
(irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-1)
#ifdef CONFIG_BF561
#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val)
#define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS()
#elif defined(CONFIG_BF54x)
#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
(irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
(irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
(irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-1)
#define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val)
#define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val)
#else
# error "no PRIO_GPIODEMUX() for this part"
#endif
#define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0)
@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#endif /* !CONFIG_IPIPE */
#define ipipe_update_tick_evtdev(evtdev) do { } while (0)
#endif /* !__ASM_BLACKFIN_IPIPE_H */

12
arch/blackfin/include/asm/ipipe_base.h
View File

@ -1,5 +1,5 @@
/* -*- linux-c -*-
* include/asm-blackfin/_baseipipe.h
* include/asm-blackfin/ipipe_base.h
*
* Copyright (C) 2007 Philippe Gerum.
*
@ -27,8 +27,9 @@
#define IPIPE_NR_XIRQS NR_IRQS
#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */
/* Blackfin-specific, global domain flags */
#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */
/* Blackfin-specific, per-cpu pipeline status */
#define IPIPE_SYNCDEFER_FLAG 15
#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK)
/* Blackfin traps -- i.e. exception vector numbers */
#define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */
@ -48,11 +49,6 @@
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
extern int test_bit(int nr, const void *addr);
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
static inline void __ipipe_stall_root(void)

36
arch/blackfin/include/asm/irq.h
View File

@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags);
#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags))
#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x)
#define local_save_flags(x) \
do { \
(x) = __ipipe_test_root() ? \
#define local_save_flags(x) \
do { \
(x) = __ipipe_test_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
barrier(); \
} while (0)
#define local_irq_save(x) \
do { \
(x) = __ipipe_test_and_stall_root(); \
#define local_irq_save(x) \
do { \
(x) = __ipipe_test_and_stall_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
barrier(); \
} while (0)
#define local_irq_restore(x) __ipipe_restore_root(x)
#define local_irq_disable() __ipipe_stall_root()
#define local_irq_enable() __ipipe_unstall_root()
static inline void local_irq_restore(unsigned long x)
{
barrier();
__ipipe_restore_root(x == __all_masked_irq_flags);
}
#define local_irq_disable() \
do { \
__ipipe_stall_root(); \
barrier(); \
} while (0)
static inline void local_irq_enable(void)
{
barrier();
__ipipe_unstall_root();
}
#define irqs_disabled() __ipipe_test_root()
#define local_save_flags_hw(x) \

2
arch/blackfin/include/asm/thread_info.h
View File

@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */

8
arch/blackfin/kernel/Makefile
View File

@ -15,13 +15,15 @@ else
obj-y += time.o
endif
CFLAGS_kgdb_test.o := -mlong-calls -O0
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o
obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
# the kgdb test puts code into L2 and without linker
# relaxation, we need to force long calls to/from it
CFLAGS_kgdb_test.o := -mlong-calls -O0

4
arch/blackfin/kernel/cplb-nompu/cplbinit.c
View File

@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
i_d = i_i = 0;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
/* Set up the zero page. */
d_tbl[i_d].addr = 0;
d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
i_tbl[i_i].addr = 0;
i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
#endif
/* Cover kernel memory with 4M pages. */
addr = 0;

180
arch/blackfin/kernel/ipipe.c
View File

@ -35,14 +35,8 @@
#include <asm/atomic.h>
#include <asm/io.h>
static int create_irq_threads;
DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
static void __ipipe_no_irqtail(void);
@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void)
*/
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
int m_ack, s = -1;
@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
* interrupt.
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
this_domain = ipipe_current_domain;
if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
next_domain = list_entry(head, struct ipipe_domain, p_link);
if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
s = __test_and_set_bit(IPIPE_STALL_FLAG,
&ipipe_root_cpudom_var(status));
next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
__ipipe_dispatch_wired(next_domain, irq);
goto finalize;
return;
goto out;
}
}
/* Ack the interrupt. */
pos = head;
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
/*
* For each domain handling the incoming IRQ, mark it
* as pending in its log.
*/
if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
/*
* Domains that handle this IRQ are polled for
* acknowledging it by decreasing priority
* order. The interrupt must be made pending
* _first_ in the domain's status flags before
* the PIC is unlocked.
*/
__ipipe_set_irq_pending(next_domain, irq);
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
/*
* If the domain does not want the IRQ to be passed
* down the interrupt pipe, exit the loop now.
*/
if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
break;
pos = next_domain->p_link.next;
}
@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
* immediately to the current domain if the interrupt has been
* marked as 'sticky'. This search does not go beyond the
* current domain in the pipeline. We also enforce the
* additional root stage lock (blackfin-specific). */
* additional root stage lock (blackfin-specific).
*/
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
s = __test_and_set_bit(IPIPE_STALL_FLAG,
&ipipe_root_cpudom_var(status));
finalize:
/*
* If the interrupt preempted the head domain, then do not
* even try to walk the pipeline, unless an interrupt is
* pending for it.
*/
if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
ipipe_head_cpudom_var(irqpend_himask) == 0)
goto out;
__ipipe_walk_pipeline(head);
out:
if (!s)
__clear_bit(IPIPE_STALL_FLAG,
&ipipe_root_cpudom_var(status));
__clear_bit(IPIPE_STALL_FLAG, &p->status);
}
int __ipipe_check_root(void)
@ -187,7 +166,7 @@ int __ipipe_check_root(void)
void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
struct irq_desc *desc = irq_desc + irq;
struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
desc->depth = 0;
@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
struct irq_desc *desc = irq_desc + irq;
struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
if (ipd != &ipipe_root &&
@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs)
{
unsigned long flags;
/* We need to run the IRQ tail hook whenever we don't
/*
* We need to run the IRQ tail hook whenever we don't
* propagate a syscall to higher domains, because we know that
* important operations might be pending there (e.g. Xenomai
* deferred rescheduling). */
* deferred rescheduling).
*/
if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
if (regs->orig_p0 < NR_syscalls) {
void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
hook();
return 0;
if ((current->flags & PF_EVNOTIFY) == 0)
return 0;
}
/*
@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq)
{
unsigned long flags;
#ifdef CONFIG_IPIPE_DEBUG
if (irq >= IPIPE_NR_IRQS ||
(ipipe_virtual_irq_p(irq)
&& !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
return -EINVAL;
#endif
local_irq_save_hw(flags);
__ipipe_handle_irq(irq, NULL);
local_irq_restore_hw(flags);
return 1;
}
/* Move Linux IRQ to threads. */
static int do_irqd(void *__desc)
asmlinkage void __ipipe_sync_root(void)
{
struct irq_desc *desc = __desc;
unsigned irq = desc - irq_desc;
int thrprio = desc->thr_prio;
int thrmask = 1 << thrprio;
int cpu = smp_processor_id();
cpumask_t cpumask;
unsigned long flags;
sigfillset(&current->blocked);
current->flags |= PF_NOFREEZE;
cpumask = cpumask_of_cpu(cpu);
set_cpus_allowed(current, cpumask);
ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
BUG_ON(irqs_disabled());
while (!kthread_should_stop()) {
local_irq_disable();
if (!(desc->status & IRQ_SCHEDULED)) {
set_current_state(TASK_INTERRUPTIBLE);
resched:
local_irq_enable();
schedule();
local_irq_disable();
}
__set_current_state(TASK_RUNNING);
/*
* If higher priority interrupt servers are ready to
* run, reschedule immediately. We need this for the
* GPIO demux IRQ handler to unmask the interrupt line
* _last_, after all GPIO IRQs have run.
*/
if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
goto resched;
if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
desc->status &= ~IRQ_SCHEDULED;
desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
local_irq_enable();
}
__set_current_state(TASK_RUNNING);
return 0;
local_irq_save_hw(flags);
clear_thread_flag(TIF_IRQ_SYNC);
if (ipipe_root_cpudom_var(irqpend_himask) != 0)
__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
local_irq_restore_hw(flags);
}
static void kick_irqd(unsigned irq, void *cookie)
void ___ipipe_sync_pipeline(unsigned long syncmask)
{
struct irq_desc *desc = irq_desc + irq;
int thrprio = desc->thr_prio;
int thrmask = 1 << thrprio;
int cpu = smp_processor_id();
struct ipipe_domain *ipd = ipipe_current_domain;
if (!(desc->status & IRQ_SCHEDULED)) {
desc->status |= IRQ_SCHEDULED;
per_cpu(pending_irqthread_mask, cpu) |= thrmask;
++per_cpu(pending_irq_count[thrprio], cpu);
wake_up_process(desc->thread);
}
}
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
{
if (desc->thread || !create_irq_threads)
return 0;
desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
if (desc->thread == NULL) {
printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
return -ENOMEM;
if (ipd == ipipe_root_domain) {
if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
return;
}
wake_up_process(desc->thread);
desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
ipipe_root_domain->irqs[irq].handler = &kick_irqd;
return 0;
}
void __init ipipe_init_irq_threads(void)
{
unsigned irq;
struct irq_desc *desc;
create_irq_threads = 1;
for (irq = 0; irq < NR_IRQS; irq++) {
desc = irq_desc + irq;
if (desc->action != NULL ||
(desc->status & IRQ_NOREQUEST) != 0)
ipipe_start_irq_thread(irq, desc);
}
__ipipe_sync_stage(syncmask);
}
EXPORT_SYMBOL(show_stack);

14
arch/blackfin/kernel/irqchip.c
View File

@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
#endif
generic_handle_irq(irq);
#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */
/* If we're the only interrupt running (ignoring IRQ15 which is for
syscalls), lower our priority to IRQ14 so that softirqs run at
that level. If there's another, lower-level interrupt, irq_exit
will defer softirqs to that. */
#ifndef CONFIG_IPIPE
/*
* If we're the only interrupt running (ignoring IRQ15 which
* is for syscalls), lower our priority to IRQ14 so that
* softirqs run at that level. If there's another,
* lower-level interrupt, irq_exit will defer softirqs to
* that. If the interrupt pipeline is enabled, we are already
* running at IRQ14 priority, so we don't need this code.
*/
CSYNC();
pending = bfin_read_IPEND() & ~0x8000;
other_ints = pending & (pending - 1);

9
arch/blackfin/kernel/kgdb_test.c
View File

@ -20,6 +20,7 @@
static char cmdline[256];
static unsigned long len;
#ifndef CONFIG_SMP
static int num1 __attribute__((l1_data));
void kgdb_l1_test(void) __attribute__((l1_text));
@ -32,6 +33,8 @@ void kgdb_l1_test(void)
printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
return ;
}
#endif
#if L2_LENGTH
static int num2 __attribute__((l2));
@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z)
static int test_proc_output(char *buf)
{
kgdb_test("hello world!", 12, 0x55, 0x10);
#ifndef CONFIG_SMP
kgdb_l1_test();
#if L2_LENGTH
#endif
#if L2_LENGTH
kgdb_l2_test();
#endif
#endif
return 0;
}

5
arch/blackfin/kernel/ptrace.c
View File

@ -45,6 +45,7 @@
#include <asm/asm-offsets.h>
#include <asm/dma.h>
#include <asm/fixed_code.h>
#include <asm/cacheflush.h>
#include <asm/mem_map.h>
#define TEXT_OFFSET 0
@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(tmp) <= FIXED_CODE_END) {
memcpy(&tmp, (const void *)(addr), sizeof(tmp));
copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
} else
@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(data) <= FIXED_CODE_END) {
memcpy((void *)(addr), &data, sizeof(data));
copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
copied = sizeof(data);
} else

10
arch/blackfin/kernel/setup.c
View File

@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p)
CPU, bfin_revid());
}
/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
panic("You can't run on this processor due to 05000448\n");
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
"wb"
"-wb"
#elif defined CONFIG_BFIN_WT
"wt"
"-wt"
#endif
"", 0);

5
arch/blackfin/kernel/time.c
View File

@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
write_seqlock(&xtime_lock);
#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
/*
* TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
* enabled.
*/
if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
#endif
do_timer(1);

33
arch/blackfin/mach-bf518/boards/ezbrd.c
View File

@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = {
.bits_per_word = 8,
};
#endif
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,

17
arch/blackfin/mach-bf518/include/mach/anomaly.h
View File

@ -2,12 +2,12 @@
* File: include/asm-blackfin/mach-bf518/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
* - ????
* - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@ -19,6 +19,8 @@
#define ANOMALY_05000122 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
#define ANOMALY_05000254 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@ -53,6 +55,12 @@
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
#define ANOMALY_05000444 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
#define ANOMALY_05000452 (1)
/* PWM_TRIPB Signal Not Available on PG10 */
#define ANOMALY_05000453 (1)
/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
#define ANOMALY_05000455 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
@ -65,15 +73,20 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif

4
arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
View File

@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif

26
arch/blackfin/mach-bf527/boards/cm_bf527.c
View File

@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

24
arch/blackfin/mach-bf527/boards/ezbrd.c
View File

@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

6
arch/blackfin/mach-bf527/include/mach/anomaly.h
View File

@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf527/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@ -167,12 +167,16 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif

4
arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
View File

@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif

5
arch/blackfin/mach-bf533/boards/Kconfig
View File

@ -38,9 +38,4 @@ config BFIN532_IP0X
help
Core support for IP04/IP04 open hardware IP-PBX.
config GENERIC_BF533_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice

1
arch/blackfin/mach-bf533/boards/Makefile
View File

@ -2,7 +2,6 @@
# arch/blackfin/mach-bf533/boards/Makefile
#
obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o

24
arch/blackfin/mach-bf533/boards/blackstamp.c
View File

@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

24
arch/blackfin/mach-bf533/boards/cm_bf533.c
View File

@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

126
arch/blackfin/mach-bf533/boards/generic_board.c
View File

@ -1,126 +0,0 @@
/*
* File: arch/blackfin/mach-bf533/generic_board.c
* Based on: arch/blackfin/mach-bf533/ezkit.c
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created: 2005
* Description:
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
/*
* Name the Board for the /proc/cpuinfo
*/
const char bfin_board_name[] = "UNKNOWN BOARD";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct resource smc91x_resources[] = {
{
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX+1,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sir0_device = {
.name = "bfin_sir",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
.resource = bfin_sir0_resources,
};
#endif
#endif
static struct platform_device *generic_board_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
};
static int __init generic_board_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
}
arch_initcall(generic_board_init);

13
arch/blackfin/mach-bf533/boards/ip0x.c
View File

@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/*
* CPOL (Clock Polarity)
* 0 - Active high SCK
@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 2,
.bus_num = 1,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
},
#endif
};

7
arch/blackfin/mach-bf533/include/mach/anomaly.h
View File

@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@ -160,7 +160,7 @@
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@ -278,9 +278,12 @@
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif

2
arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
View File

@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART_TX,
CH_UART_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif

5
arch/blackfin/mach-bf537/boards/Kconfig
View File

@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR
help
Board supply package for CSP Minotaur
config GENERIC_BF537_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice

1
arch/blackfin/mach-bf537/boards/Makefile
View File

@ -2,7 +2,6 @@
# arch/blackfin/mach-bf537/boards/Makefile
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o

26
arch/blackfin/mach-bf537/boards/cm_bf537.c
View File

@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 1,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

745
arch/blackfin/mach-bf537/boards/generic_board.c
View File

@ -1,745 +0,0 @@
/*
* File: arch/blackfin/mach-bf537/boards/generic_board.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created:
* Description:
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
*/
const char bfin_board_name[] = "UNKNOWN BOARD";
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
.start = 0x203C0000,
.end = 0x203C0000 + 0x000fffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ,
},
};
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
.port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
.dack_polarity_high = 0,
.dreq_polarity_high = 0,
};
static struct platform_device bfin_isp1760_device = {
.name = "isp1760-hcd",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
},
.num_resources = ARRAY_SIZE(bfin_isp1760_resources),
.resource = bfin_isp1760_resources,
};
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
}, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
}, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pcmcia_cf_device = {
.name = "bfin_cf_pcmcia",
.id = -1,
.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
.resource = bfin_pcmcia_cf_resources,
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
.end = 0x203FB800 + 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x203FB800 + 4,
.end = 0x203FB800 + 5,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
},
};
static struct platform_device dm9000_device = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
};
#endif
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
}, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
}, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
}
#endif
static struct sl811_platform_data sl811_priv = {
.potpg = 10,
.power = 250, /* == 500mA */
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
.port_power = &sl811_port_power,
#endif
};
static struct platform_device sl811_hcd_device = {
.name = "sl811-hcd",
.id = 0,
.dev = {
.platform_data = &sl811_priv,
},
.num_resources = ARRAY_SIZE(sl811_hcd_resources),
.resource = sl811_hcd_resources,
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
}, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
}, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct isp1362_platform_data isp1362_priv = {
.sel15Kres = 1,
.clknotstop = 0,
.oc_enable = 0,
.int_act_high = 0,
.int_edge_triggered = 0,
.remote_wakeup_connected = 0,
.no_power_switching = 1,
.power_switching_mode = 0,
};
static struct platform_device isp1362_hcd_device = {
.name = "isp1362-hcd",
.id = 0,
.dev = {
.platform_data = &isp1362_priv,
},
.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
.resource = isp1362_hcd_resources,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device net2272_bfin_device = {
.name = "net2272",
.id = -1,
.num_resources = ARRAY_SIZE(net2272_bfin_resources),
.resource = net2272_bfin_resources,
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
.name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
.name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
static struct flash_platform_data bfin_spi_flash_data = {
.name = "m25p80",
.parts = bfin_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
.type = "m25p64",
};
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
};
#endif
#if defined(CONFIG_SPI_ADC_BF533) \
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
.bits_per_word = 8,
};
#endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.pressure_max = 1000,
.pressure_min = 0,
.stopacq_polarity = 1,
.first_conversion_delay = 3,
.acquisition_time = 1,
.averaging = 1,
.pen_down_acc_interval = 1,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SPI_ADC_BF533) \
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
},
#endif
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
#endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &spi_ad7877_chip_info,
},
#endif
};
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
.start = SPI0_REGBASE,
.end = SPI0_REGBASE + 0xFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = CH_SPI,
.end = CH_SPI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_spi0_device = {
.name = "bfin-spi",
.id = 0, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
.dev = {
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
.name = "bf537-lq035",
};
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
static struct platform_device bfin_fb_adv7393_device = {
.name = "bfin-adv7393",
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
}, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device bfin_uart_device = {
.name = "bfin-uart",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_uart_resources),
.resource = bfin_uart_resources,
};
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX+1,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sir0_device = {
.name = "bfin_sir",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
.resource = bfin_sir0_resources,
};
#endif
#ifdef CONFIG_BFIN_SIR1
static struct resource bfin_sir1_resources[] = {
{
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART1_RX,
.end = CH_UART1_RX+1,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sir1_device = {
.name = "bfin_sir",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_sir1_resources),
.resource = bfin_sir1_resources,
};
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
[0] = {
.start = TWI0_REGBASE,
.end = TWI0_REGBASE + 0xFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_TWI,
.end = IRQ_TWI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device i2c_bfin_twi_device = {
.name = "i2c-bfin-twi",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_twi0_resource),
.resource = bfin_twi0_resource,
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
.name = "bfin-sport-uart",
.id = 0,
};
static struct platform_device bfin_sport1_uart_device = {
.name = "bfin-sport-uart",
.id = 1,
};
#endif
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
&sl811_hcd_device,
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
&dm9000_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
&net2272_bfin_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
&bfin_fb_adv7393_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#ifdef CONFIG_BFIN_SIR1
&bfin_sir1_device,
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
};
static int __init generic_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
}
arch_initcall(generic_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
void bfin_get_ether_addr(char *addr)
{
random_ether_addr(addr);
printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
}
EXPORT_SYMBOL(bfin_get_ether_addr);
#endif

24
arch/blackfin/mach-bf537/boards/minotaur.c
View File

@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

24
arch/blackfin/mach-bf537/boards/pnav10.c
View File

@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

24
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View File

@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

7
arch/blackfin/mach-bf537/include/mach/anomaly.h
View File

@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@ -110,7 +110,7 @@
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@ -168,9 +168,12 @@
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif

4
arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
View File

@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif

6
arch/blackfin/mach-bf538/include/mach/anomaly.h
View File

@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf538/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@ -120,13 +120,17 @@
#define ANOMALY_05000198 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif

4
arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
View File

@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif

22
arch/blackfin/mach-bf548/include/mach/anomaly.h
View File

@ -2,12 +2,12 @@
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
* - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
* - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@ -91,8 +91,6 @@
#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@ -157,8 +155,22 @@
#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
/* OTP Write Accesses Not Supported */
#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
#define ANOMALY_05000446 (1)
/* UART IrDA Receiver Fails on Extended Bit Pulses */
#define ANOMALY_05000447 (1)
/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
/* USB DMA Mode 1 Short Packet Data Corruption */
#define ANOMALY_05000450 (1
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
@ -171,6 +183,8 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)

22
arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
View File

@ -63,7 +63,7 @@
#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
@ -74,12 +74,12 @@
# define CONFIG_UART0_RTS_PIN -1
# endif
# ifndef CONFIG_UART1_CTS_PIN
# define CONFIG_UART1_CTS_PIN -1
# ifndef CONFIG_UART2_CTS_PIN
# define CONFIG_UART2_CTS_PIN -1
# endif
# ifndef CONFIG_UART1_RTS_PIN
# define CONFIG_UART1_RTS_PIN -1
# ifndef CONFIG_UART2_RTS_PIN
# define CONFIG_UART2_RTS_PIN -1
# endif
#endif
@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@ -143,6 +143,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART1_TX,
CH_UART1_RX,
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
0,
0,
#endif
},
#endif
@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART2_TX,
CH_UART2_RX,
#endif
#ifdef CONFIG_BFIN_UART2_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART2_CTS_PIN,
CONFIG_UART2_RTS_PIN,
#endif
@ -167,6 +171,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART3_TX,
CH_UART3_RX,
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
0,
0,
#endif
},
#endif

8
arch/blackfin/mach-bf548/include/mach/irq.h
View File

@ -123,8 +123,8 @@ Events (highest priority) EMU 0
#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
@ -361,8 +361,8 @@ Events (highest priority) EMU 0
#define IRQ_UART2_ERR IRQ_UART2_ERROR
#define IRQ_CAN0_ERR IRQ_CAN0_ERROR
#define IRQ_MXVR_ERR IRQ_MXVR_ERROR
#define IRQ_EPP1_ERR IRQ_EPP1_ERROR
#define IRQ_EPP2_ERR IRQ_EPP2_ERROR
#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR
#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR
#define IRQ_UART3_ERR IRQ_UART3_ERROR
#define IRQ_HOST_ERR IRQ_HOST_ERROR
#define IRQ_PIXC_ERR IRQ_PIXC_ERROR

5
arch/blackfin/mach-bf561/boards/Kconfig
View File

@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM
help
CM-BF561 support for EVAL- and DEV-Board.
config GENERIC_BF561_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice

1
arch/blackfin/mach-bf561/boards/Makefile
View File

@ -2,7 +2,6 @@
# arch/blackfin/mach-bf561/boards/Makefile
#
obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o

15
arch/blackfin/mach-bf561/boards/cm_bf561.c
View File

@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc",
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.chip_select = 5,
.controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif

113
arch/blackfin/mach-bf561/boards/generic_board.c
View File

@ -1,113 +0,0 @@
/*
* File: arch/blackfin/mach-bf561/generic_board.c
* Based on: arch/blackfin/mach-bf533/ezkit.c
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created:
* Description:
*
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
const char bfin_board_name[] = "UNKNOWN BOARD";
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct resource smc91x_resources[] = {
{
.start = 0x2C010300,
.end = 0x2C010300 + 16,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}, {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.flags = IORESOURCE_IRQ,
},
{
.start = CH_UART0_RX,
.end = CH_UART0_RX+1,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device bfin_sir0_device = {
.name = "bfin_sir",
.id = 0,
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
.resource = bfin_sir0_resources,
};
#endif
#endif
static struct platform_device *generic_board_devices[] __initdata = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
};
static int __init generic_board_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
return platform_add_devices(generic_board_devices,
ARRAY_SIZE(generic_board_devices));
}
arch_initcall(generic_board_init);

7
arch/blackfin/mach-bf561/include/mach/anomaly.h
View File

@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2004-2008 Analog Devices Inc.
* Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@ -224,7 +224,7 @@
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@ -283,8 +283,11 @@
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#endif

2
arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
View File

@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
CH_UART_TX,
CH_UART_RX,
#endif
#ifdef CONFIG_BFIN_UART0_CTSRTS
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif

9
arch/blackfin/mach-common/arch_checks.c
View File

@ -62,3 +62,12 @@
#if (CONFIG_BOOT_LOAD & 0x3)
# error "The kernel load address must be 4 byte aligned"
#endif
/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
# error "The kernel load address is too high; keep it below 10meg for safety"
#endif
#if ANOMALY_05000448
# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
#endif

22
arch/blackfin/mach-common/cache.S
View File

@ -66,11 +66,33 @@
/* Invalidate all instruction cache lines assocoiated with this memory area */
ENTRY(_blackfin_icache_flush_range)
/*
* Walkaround to avoid loading wrong instruction after invalidating icache
* and following sequence is met.
*
* 1) One instruction address is cached in the instruction cache.
* 2) This instruction in SDRAM is changed.
* 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
* 4) This instruction is executed again, but the old one is loaded.
*/
P0 = R0;
IFLUSH[P0];
do_flush IFLUSH, , nop
ENDPROC(_blackfin_icache_flush_range)
/* Flush all cache lines assocoiated with this area of memory. */
ENTRY(_blackfin_icache_dcache_flush_range)
/*
* Walkaround to avoid loading wrong instruction after invalidating icache
* and following sequence is met.
*
* 1) One instruction address is cached in the instruction cache.
* 2) This instruction in SDRAM is changed.
* 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
* 4) This instruction is executed again, but the old one is loaded.
*/
P0 = R0;
IFLUSH[P0];
do_flush FLUSH, IFLUSH
ENDPROC(_blackfin_icache_dcache_flush_range)

2
arch/blackfin/mach-common/clocks-init.c
View File

@ -17,7 +17,7 @@
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
(PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
(PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
__attribute__((l1_text))
static void do_sync(void)

24
arch/blackfin/mach-common/dpmc_modes.S
View File

@ -376,10 +376,22 @@ ENTRY(_do_hibernate)
#endif
#ifdef PINT0_ASSIGN
PM_SYS_PUSH(PINT0_MASK_SET)
PM_SYS_PUSH(PINT1_MASK_SET)
PM_SYS_PUSH(PINT2_MASK_SET)
PM_SYS_PUSH(PINT3_MASK_SET)
PM_SYS_PUSH(PINT0_ASSIGN)
PM_SYS_PUSH(PINT1_ASSIGN)
PM_SYS_PUSH(PINT2_ASSIGN)
PM_SYS_PUSH(PINT3_ASSIGN)
PM_SYS_PUSH(PINT0_INVERT_SET)
PM_SYS_PUSH(PINT1_INVERT_SET)
PM_SYS_PUSH(PINT2_INVERT_SET)
PM_SYS_PUSH(PINT3_INVERT_SET)
PM_SYS_PUSH(PINT0_EDGE_SET)
PM_SYS_PUSH(PINT1_EDGE_SET)
PM_SYS_PUSH(PINT2_EDGE_SET)
PM_SYS_PUSH(PINT3_EDGE_SET)
#endif
PM_SYS_PUSH(EBIU_AMBCTL0)
@ -714,10 +726,22 @@ ENTRY(_do_hibernate)
PM_SYS_POP(EBIU_AMBCTL0)
#ifdef PINT0_ASSIGN
PM_SYS_POP(PINT3_EDGE_SET)
PM_SYS_POP(PINT2_EDGE_SET)
PM_SYS_POP(PINT1_EDGE_SET)
PM_SYS_POP(PINT0_EDGE_SET)
PM_SYS_POP(PINT3_INVERT_SET)
PM_SYS_POP(PINT2_INVERT_SET)
PM_SYS_POP(PINT1_INVERT_SET)
PM_SYS_POP(PINT0_INVERT_SET)
PM_SYS_POP(PINT3_ASSIGN)
PM_SYS_POP(PINT2_ASSIGN)
PM_SYS_POP(PINT1_ASSIGN)
PM_SYS_POP(PINT0_ASSIGN)
PM_SYS_POP(PINT3_MASK_SET)
PM_SYS_POP(PINT2_MASK_SET)
PM_SYS_POP(PINT1_MASK_SET)
PM_SYS_POP(PINT0_MASK_SET)
#endif
#ifdef SICA_IWR1

61
arch/blackfin/mach-common/entry.S
View File

@ -600,6 +600,19 @@ ENTRY(_system_call)
p2 = [p2];
[p2+(TASK_THREAD+THREAD_KSP)] = sp;
#ifdef CONFIG_IPIPE
r0 = sp;
SP += -12;
call ___ipipe_syscall_root;
SP += 12;
cc = r0 == 1;
if cc jump .Lsyscall_really_exit;
cc = r0 == -1;
if cc jump .Lresume_userspace;
r3 = [sp + PT_R3];
r4 = [sp + PT_R4];
p0 = [sp + PT_ORIG_P0];
#endif /* CONFIG_IPIPE */
/* Check the System Call */
r7 = __NR_syscall;
@ -654,6 +667,17 @@ ENTRY(_system_call)
r7 = r7 & r4;
.Lsyscall_resched:
#ifdef CONFIG_IPIPE
cc = BITTST(r7, TIF_IRQ_SYNC);
if !cc jump .Lsyscall_no_irqsync;
[--sp] = reti;
r0 = [sp++];
SP += -12;
call ___ipipe_sync_root;
SP += 12;
jump .Lresume_userspace_1;
.Lsyscall_no_irqsync:
#endif
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lsyscall_sigpending;
@ -685,6 +709,10 @@ ENTRY(_system_call)
.Lsyscall_really_exit:
r5 = [sp + PT_RESERVED];
rets = r5;
#ifdef CONFIG_IPIPE
[--sp] = reti;
r5 = [sp++];
#endif /* CONFIG_IPIPE */
rts;
ENDPROC(_system_call)
@ -771,6 +799,15 @@ _new_old_task:
ENDPROC(_resume)
ENTRY(_ret_from_exception)
#ifdef CONFIG_IPIPE
[--sp] = rets;
SP += -12;
call ___ipipe_check_root
SP += 12
rets = [sp++];
cc = r0 == 0;
if cc jump 4f; /* not on behalf of Linux, get out */
#endif /* CONFIG_IPIPE */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
@ -827,6 +864,28 @@ ENTRY(_ret_from_exception)
rts;
ENDPROC(_ret_from_exception)
#ifdef CONFIG_IPIPE
_sync_root_irqs:
[--sp] = reti; /* Reenable interrupts */
r0 = [sp++];
jump.l ___ipipe_sync_root
_resume_kernel_from_int:
r0.l = _sync_root_irqs
r0.h = _sync_root_irqs
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
SP += -12;
call ___ipipe_call_irqtail
SP += 12;
( r7:4, p5:3 ) = [sp++];
rets = [sp++];
rts
#else
#define _resume_kernel_from_int 2f
#endif
ENTRY(_return_from_int)
/* If someone else already raised IRQ 15, do nothing. */
csync;
@ -848,7 +907,7 @@ ENTRY(_return_from_int)
r1 = r0 - r1;
r2 = r0 & r1;
cc = r2 == 0;
if !cc jump 2f;
if !cc jump _resume_kernel_from_int;
/* Lower the interrupt level to 15. */
p0.l = lo(EVT15);

12
arch/blackfin/mach-common/interrupt.S
View File

@ -235,6 +235,7 @@ ENDPROC(_evt_system_call)
#ifdef CONFIG_IPIPE
ENTRY(___ipipe_call_irqtail)
p0 = r0;
r0.l = 1f;
r0.h = 1f;
reti = r0;
@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail)
1:
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
p0.l = ___ipipe_irq_tail_hook;
p0.h = ___ipipe_irq_tail_hook;
p0 = [p0];
sp += -12;
call (p0);
sp += 12;
@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail)
p0.h = hi(EVT14);
[p0] = r0;
csync;
r0 = 0x401f;
r0 = 0x401f (z);
sti r0;
raise 14;
[--sp] = reti; /* IRQs on. */
@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail)
p0.h = _bfin_irq_flags;
r0 = [p0];
sti r0;
#if 0 /* FIXME: this actually raises scheduling latencies */
/* Reenable interrupts */
[--sp] = reti;
r0 = [sp++];
#endif
rts;
ENDPROC(___ipipe_call_irqtail)
#endif /* CONFIG_IPIPE */

126
arch/blackfin/mach-common/ints-priority.c
View File

@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq)
static void bfin_internal_mask_irq(unsigned int irq)
{
unsigned long flags;
#ifdef CONFIG_BF53x
local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq)
~(1 << mask_bit));
#endif
#endif
local_irq_restore_hw(flags);
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
unsigned long flags;
#ifdef CONFIG_BF53x
local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq)
(1 << mask_bit));
#endif
#endif
local_irq_restore_hw(flags);
}
#ifdef CONFIG_PM
@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
{
#ifdef CONFIG_IPIPE
_set_irq_handler(irq, handle_edge_irq);
_set_irq_handler(irq, handle_level_irq);
#else
struct irq_desc *desc = irq_desc + irq;
/* May not call generic set_irq_handler() due to spinlock
@ -1055,13 +1065,18 @@ int __init init_arch_irq(void)
#endif
default:
#ifdef CONFIG_IPIPE
/*
* We want internal interrupt sources to be masked, because
* ISRs may trigger interrupts recursively (e.g. DMA), but
* interrupts are _not_ masked at CPU level. So let's handle
* them as level interrupts.
*/
set_irq_handler(irq, handle_level_irq);
/*
* We want internal interrupt sources to be
* masked, because ISRs may trigger interrupts
* recursively (e.g. DMA), but interrupts are
* _not_ masked at CPU level. So let's handle
* most of them as level interrupts, except
* the timer interrupt which is special.
*/
if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
set_irq_handler(irq, handle_simple_irq);
else
set_irq_handler(irq, handle_level_irq);
#else /* !CONFIG_IPIPE */
set_irq_handler(irq, handle_simple_irq);
#endif /* !CONFIG_IPIPE */
@ -1123,9 +1138,8 @@ int __init init_arch_irq(void)
#ifdef CONFIG_IPIPE
for (irq = 0; irq < NR_IRQS; irq++) {
struct irq_desc *desc = irq_desc + irq;
struct irq_desc *desc = irq_to_desc(irq);
desc->ic_prio = __ipipe_get_irq_priority(irq);
desc->thr_prio = __ipipe_get_irqthread_priority(irq);
}
#endif /* CONFIG_IPIPE */
@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq)
return IVG15;
}
int __ipipe_get_irqthread_priority(unsigned irq)
{
int ient, prio;
int demux_irq;
/* The returned priority value is rescaled to [0..IVG13+1]
* with 0 being the lowest effective priority level. */
if (irq <= IRQ_CORETMR)
return IVG13 - irq + 1;
/* GPIO IRQs are given the priority of the demux
* interrupt. */
if (IS_GPIOIRQ(irq)) {
#if defined(CONFIG_BF54x)
u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
demux_irq = (bank == 0 ? IRQ_PINT0 :
bank == 1 ? IRQ_PINT1 :
bank == 2 ? IRQ_PINT2 :
IRQ_PINT3);
#elif defined(CONFIG_BF561)
demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
IRQ_PROG0_INTA);
#elif defined(CONFIG_BF52x)
demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
IRQ_PORTF_INTA);
#else
demux_irq = irq;
#endif
return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
}
/* The GPIO demux interrupt is given a lower priority
* than the GPIO IRQs, so that its threaded handler
* unmasks the interrupt line after the decoded IRQs
* have been processed. */
prio = PRIO_GPIODEMUX(irq);
/* demux irq? */
if (prio != -1)
return IVG13 - prio;
for (ient = 0; ient < NR_PERI_INTS; ient++) {
struct ivgx *ivg = ivg_table + ient;
if (ivg->irqno == irq) {
for (prio = 0; prio <= IVG13-IVG7; prio++) {
if (ivg7_13[prio].ifirst <= ivg &&
ivg7_13[prio].istop > ivg)
return IVG7 - prio;
}
}
}
return 0;
}
/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain = ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
int irq;
int irq, s;
if (likely(vec == EVT_IVTMR_P)) {
irq = IRQ_CORETMR;
goto handle_irq;
goto core_tick;
}
SSYNC();
@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
irq = ivg->irqno;
if (irq == IRQ_SYSTMR) {
#ifdef CONFIG_GENERIC_CLOCKEVENTS
core_tick:
#else
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
#endif
/* This is basically what we need from the register frame. */
__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
if (!ipipe_root_domain_p)
__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
else
if (this_domain != ipipe_root_domain)
__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
else
__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
}
handle_irq:
#ifndef CONFIG_GENERIC_CLOCKEVENTS
core_tick:
#endif
if (this_domain == ipipe_root_domain) {
s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
barrier();
}
ipipe_trace_irq_entry(irq);
__ipipe_handle_irq(irq, regs);
ipipe_trace_irq_exit(irq);
ipipe_trace_irq_exit(irq);
if (ipipe_root_domain_p)
return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
if (this_domain == ipipe_root_domain) {
set_thread_flag(TIF_IRQ_SYNC);
if (!s) {
__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
return !test_bit(IPIPE_STALL_FLAG, &p->status);
}
}
return 0;
}

6
arch/blackfin/mach-common/smp.c
View File

@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
kfree(msg);
break;
case BFIN_IPI_CALL_FUNC:
spin_unlock(&msg_queue->lock);
ipi_call_function(cpu, msg);
spin_lock(&msg_queue->lock);
break;
case BFIN_IPI_CPU_STOP:
spin_unlock(&msg_queue->lock);
ipi_cpu_stop(cpu);
spin_lock(&msg_queue->lock);
kfree(msg);
break;
default:
@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
smp_flush_data.start = start;
smp_flush_data.end = end;
if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);

2
arch/blackfin/mm/init.c
View File

@ -104,7 +104,7 @@ void __init paging_init(void)
}
}
asmlinkage void init_pda(void)
asmlinkage void __init init_pda(void)
{
unsigned int cpu = raw_smp_processor_id();