renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 08:44:14 +08:00
Code

Merge branch 'fortglx/3.10/time' of git://git.linaro.org/people/jstultz/linux into timers/core

Browse Source
This commit is contained in:
Thomas Gleixner 2013-04-03 12:27:29 +02:00
commit 0ed2aef9b3
130 changed files with 1679 additions and 971 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
Documentation/input/alps.txt
View File

@ -3,10 +3,26 @@ ALPS Touchpad Protocol
Introduction
------------
Currently the ALPS touchpad driver supports five protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4 and 5.
Currently the ALPS touchpad driver supports four protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
protocol versions is contained in the following sections.
Since roughly mid-2010 several new ALPS touchpads have been released and
integrated into a variety of laptops and netbooks. These new touchpads
have enough behavior differences that the alps_model_data definition
table, describing the properties of the different versions, is no longer
adequate. The design choices were to re-define the alps_model_data
table, with the risk of regression testing existing devices, or isolate
the new devices outside of the alps_model_data table. The latter design
choice was made. The new touchpad signatures are named: "Rushmore",
"Pinnacle", and "Dolphin", which you will see in the alps.c code.
For the purposes of this document, this group of ALPS touchpads will
generically be called "new ALPS touchpads".
We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
(Compatibility ID) definition as a way to uniquely identify the
different ALPS variants but there did not appear to be a 1:1 mapping.
In fact, it appeared to be an m:n mapping between the _HID and actual
hardware type.
Detection
---------
@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
matched against known models in the alps_model_data_array.
With protocol versions 3 and 4, the E7 report model signature is always
73-02-64. To differentiate between these versions, the response from the
"Enter Command Mode" sequence must be inspected as described below.
For older touchpads supporting protocol versions 3 and 4, the E7 report
model signature is always 73-02-64. To differentiate between these
versions, the response from the "Enter Command Mode" sequence must be
inspected as described below.
The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
seem to be better differentiated by the EC Command Mode response.
Command Mode
------------
@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the
register. Registers are written by writing the value one nibble at a time
using the same encoding used for addresses.
For the new ALPS touchpads, the EC command is used to enter command
mode. The response in the new ALPS touchpads is significantly different,
and more important in determining the behavior. This code has been
separated from the original alps_model_data table and put in the
alps_identify function. For example, there seem to be two hardware init
sequences for the "Dolphin" touchpads as determined by the second byte
of the EC response.
Packet Format
-------------
@ -187,3 +215,28 @@ There are several things worth noting here.
well.
So far no v4 devices with tracksticks have been encountered.
ALPS Absolute Mode - Protocol Version 5
---------------------------------------
This is basically Protocol Version 3 but with different logic for packet
decode. It uses the same alps_process_touchpad_packet_v3 call with a
specialized decode_fields function pointer to correctly interpret the
packets. This appears to only be used by the Dolphin devices.
For single-touch, the 6-byte packet format is:
byte 0: 1 1 0 0 1 0 0 0
byte 1: 0 x6 x5 x4 x3 x2 x1 x0
byte 2: 0 y6 y5 y4 y3 y2 y1 y0
byte 3: 0 M R L 1 m r l
byte 4: y10 y9 y8 y7 x10 x9 x8 x7
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
For mt, the format is:
byte 0: 1 1 1 n3 1 n2 n1 x24
byte 1: 1 y7 y6 y5 y4 y3 y2 y1
byte 2: ? x2 x1 y12 y11 y10 y9 y8
byte 3: 0 x23 x22 x21 x20 x19 x18 x17
byte 4: 0 x9 x8 x7 x6 x5 x4 x3
byte 5: 0 x16 x15 x14 x13 x12 x11 x10

77
Documentation/networking/tuntap.txt
View File

@ -105,6 +105,83 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
Proto [2 bytes]
Raw protocol(IP, IPv6, etc) frame.
3.3 Multiqueue tuntap interface:
From version 3.8, Linux supports multiqueue tuntap which can uses multiple
file descriptors (queues) to parallelize packets sending or receiving. The
device allocation is the same as before, and if user wants to create multiple
queues, TUNSETIFF with the same device name must be called many times with
IFF_MULTI_QUEUE flag.
char *dev should be the name of the device, queues is the number of queues to
be created, fds is used to store and return the file descriptors (queues)
created to the caller. Each file descriptor were served as the interface of a
queue which could be accessed by userspace.
#include <linux/if.h>
#include <linux/if_tun.h>
int tun_alloc_mq(char *dev, int queues, int *fds)
{
struct ifreq ifr;
int fd, err, i;
if (!dev)
return -1;
memset(&ifr, 0, sizeof(ifr));
/* Flags: IFF_TUN - TUN device (no Ethernet headers)
* IFF_TAP - TAP device
*
* IFF_NO_PI - Do not provide packet information
* IFF_MULTI_QUEUE - Create a queue of multiqueue device
*/
ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
strcpy(ifr.ifr_name, dev);
for (i = 0; i < queues; i++) {
if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
goto err;
err = ioctl(fd, TUNSETIFF, (void *)&ifr);
if (err) {
close(fd);
goto err;
}
fds[i] = fd;
}
return 0;
err:
for (--i; i >= 0; i--)
close(fds[i]);
return err;
}
A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
enabled by default after it was created through TUNSETIFF.
fd is the file descriptor (queue) that we want to enable or disable, when
enable is true we enable it, otherwise we disable it
#include <linux/if.h>
#include <linux/if_tun.h>
int tun_set_queue(int fd, int enable)
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
if (enable)
ifr.ifr_flags = IFF_ATTACH_QUEUE;
else
ifr.ifr_flags = IFF_DETACH_QUEUE;
return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
}
Universal TUN/TAP device driver Frequently Asked Question.
1. What platforms are supported by TUN/TAP driver ?

2
Documentation/trace/ftrace.txt
View File

@ -1873,7 +1873,7 @@ feature:
status\input | 0 | 1 | else |
--------------+------------+------------+------------+
not allocated |(do nothing)| alloc+swap | EINVAL |
not allocated |(do nothing)| alloc+swap |(do nothing)|
--------------+------------+------------+------------+
allocated | free | swap | clear |
--------------+------------+------------+------------+

2
MAINTAINERS
View File

@ -6412,6 +6412,8 @@ F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com

1
arch/arm/mach-bcm/Kconfig
View File

@ -6,6 +6,7 @@ config ARCH_BCM
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CPU_V7
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
select GPIO_BCM

7
arch/arm/mach-bcm/board_bcm.c
View File

@ -16,14 +16,11 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irqchip.h>
#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
static void timer_init(void)
{
}
static void __init board_init(void)
{
@ -35,7 +32,7 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
.init_irq = irqchip_init,
.init_time = timer_init,
.init_time = clocksource_of_init,
.init_machine = board_init,
.dt_compat = bcm11351_dt_compat,
MACHINE_END

1
arch/s390/include/asm/cpu_mf.h
View File

@ -12,6 +12,7 @@
#ifndef _ASM_S390_CPU_MF_H
#define _ASM_S390_CPU_MF_H
#include <linux/errno.h>
#include <asm/facility.h>
#define CPU_MF_INT_SF_IAE (1 << 31) /* invalid entry address */

2
arch/um/drivers/chan.h
View File

@ -37,7 +37,7 @@ extern int console_write_chan(struct chan *chan, const char *buf,
extern int console_open_chan(struct line *line, struct console *co);
extern void deactivate_chan(struct chan *chan, int irq);
extern void reactivate_chan(struct chan *chan, int irq);
extern void chan_enable_winch(struct chan *chan, struct tty_struct *tty);
extern void chan_enable_winch(struct chan *chan, struct tty_port *port);
extern int enable_chan(struct line *line);
extern void close_chan(struct line *line);
extern int chan_window_size(struct line *line,

4
arch/um/drivers/chan_kern.c
View File

@ -122,10 +122,10 @@ static int open_chan(struct list_head *chans)
return err;
}
void chan_enable_winch(struct chan *chan, struct tty_struct *tty)
void chan_enable_winch(struct chan *chan, struct tty_port *port)
{
if (chan && chan->primary && chan->ops->winch)
register_winch(chan->fd, tty);
register_winch(chan->fd, port);
}
static void line_timer_cb(struct work_struct *work)

12
arch/um/drivers/chan_user.c
View File

@ -216,7 +216,7 @@ static int winch_thread(void *arg)
}
}
static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out,
static int winch_tramp(int fd, struct tty_port *port, int *fd_out,
unsigned long *stack_out)
{
struct winch_data data;
@ -271,7 +271,7 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out,
return err;
}
void register_winch(int fd, struct tty_struct *tty)
void register_winch(int fd, struct tty_port *port)
{
unsigned long stack;
int pid, thread, count, thread_fd = -1;
@ -281,17 +281,17 @@ void register_winch(int fd, struct tty_struct *tty)
return;
pid = tcgetpgrp(fd);
if (is_skas_winch(pid, fd, tty)) {
register_winch_irq(-1, fd, -1, tty, 0);
if (is_skas_winch(pid, fd, port)) {
register_winch_irq(-1, fd, -1, port, 0);
return;
}
if (pid == -1) {
thread = winch_tramp(fd, tty, &thread_fd, &stack);
thread = winch_tramp(fd, port, &thread_fd, &stack);
if (thread < 0)
return;
register_winch_irq(thread_fd, fd, thread, tty, stack);
register_winch_irq(thread_fd, fd, thread, port, stack);
count = write(thread_fd, &c, sizeof(c));
if (count != sizeof(c))

6
arch/um/drivers/chan_user.h
View File

@ -38,10 +38,10 @@ extern int generic_window_size(int fd, void *unused, unsigned short *rows_out,
unsigned short *cols_out);
extern void generic_free(void *data);
struct tty_struct;
extern void register_winch(int fd, struct tty_struct *tty);
struct tty_port;
extern void register_winch(int fd, struct tty_port *port);
extern void register_winch_irq(int fd, int tty_fd, int pid,
struct tty_struct *tty, unsigned long stack);
struct tty_port *port, unsigned long stack);
#define __channel_help(fn, prefix) \
__uml_help(fn, prefix "[0-9]*=<channel description>\n" \

42
arch/um/drivers/line.c
View File

@ -305,7 +305,7 @@ static int line_activate(struct tty_port *port, struct tty_struct *tty)
return ret;
if (!line->sigio) {
chan_enable_winch(line->chan_out, tty);
chan_enable_winch(line->chan_out, port);
line->sigio = 1;
}
@ -315,8 +315,22 @@ static int line_activate(struct tty_port *port, struct tty_struct *tty)
return 0;
}
static void unregister_winch(struct tty_struct *tty);
static void line_destruct(struct tty_port *port)
{
struct tty_struct *tty = tty_port_tty_get(port);
struct line *line = tty->driver_data;
if (line->sigio) {
unregister_winch(tty);
line->sigio = 0;
}
}
static const struct tty_port_operations line_port_ops = {
.activate = line_activate,
.destruct = line_destruct,
};
int line_open(struct tty_struct *tty, struct file *filp)
@ -340,18 +354,6 @@ int line_install(struct tty_driver *driver, struct tty_struct *tty,
return 0;
}
static void unregister_winch(struct tty_struct *tty);
void line_cleanup(struct tty_struct *tty)
{
struct line *line = tty->driver_data;
if (line->sigio) {
unregister_winch(tty);
line->sigio = 0;
}
}
void line_close(struct tty_struct *tty, struct file * filp)
{
struct line *line = tty->driver_data;
@ -601,7 +603,7 @@ struct winch {
int fd;
int tty_fd;
int pid;
struct tty_struct *tty;
struct tty_port *port;
unsigned long stack;
struct work_struct work;
};
@ -655,7 +657,7 @@ static irqreturn_t winch_interrupt(int irq, void *data)
goto out;
}
}
tty = winch->tty;
tty = tty_port_tty_get(winch->port);
if (tty != NULL) {
line = tty->driver_data;
if (line != NULL) {
@ -663,6 +665,7 @@ static irqreturn_t winch_interrupt(int irq, void *data)
&tty->winsize.ws_col);
kill_pgrp(tty->pgrp, SIGWINCH, 1);
}
tty_kref_put(tty);
}
out:
if (winch->fd != -1)
@ -670,7 +673,7 @@ static irqreturn_t winch_interrupt(int irq, void *data)
return IRQ_HANDLED;
}
void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty,
void register_winch_irq(int fd, int tty_fd, int pid, struct tty_port *port,
unsigned long stack)
{
struct winch *winch;
@ -685,7 +688,7 @@ void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty,
.fd = fd,
.tty_fd = tty_fd,
.pid = pid,
.tty = tty,
.port = port,
.stack = stack });
if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
@ -714,15 +717,18 @@ static void unregister_winch(struct tty_struct *tty)
{
struct list_head *ele, *next;
struct winch *winch;
struct tty_struct *wtty;
spin_lock(&winch_handler_lock);
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
if (winch->tty == tty) {
wtty = tty_port_tty_get(winch->port);
if (wtty == tty) {
free_winch(winch);
break;
}
tty_kref_put(wtty);
}
spin_unlock(&winch_handler_lock);
}

2
arch/um/drivers/net_kern.c
View File

@ -218,6 +218,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
spin_lock_irqsave(&lp->lock, flags);
len = (*lp->write)(lp->fd, skb, lp);
skb_tx_timestamp(skb);
if (len == skb->len) {
dev->stats.tx_packets++;
@ -281,6 +282,7 @@ static void uml_net_get_drvinfo(struct net_device *dev,
static const struct ethtool_ops uml_net_ethtool_ops = {
.get_drvinfo = uml_net_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_ts_info = ethtool_op_get_ts_info,
};
static void uml_net_user_timer_expire(unsigned long _conn)

1
arch/um/drivers/ssl.c
View File

@ -105,7 +105,6 @@ static const struct tty_operations ssl_ops = {
.throttle = line_throttle,
.unthrottle = line_unthrottle,
.install = ssl_install,
.cleanup = line_cleanup,
.hangup = line_hangup,
};

1
arch/um/drivers/stdio_console.c
View File

@ -110,7 +110,6 @@ static const struct tty_operations console_ops = {
.set_termios = line_set_termios,
.throttle = line_throttle,
.unthrottle = line_unthrottle,
.cleanup = line_cleanup,
.hangup = line_hangup,
};

2
arch/um/os-Linux/signal.c
View File

@ -15,7 +15,7 @@
#include <sysdep/mcontext.h>
#include "internal.h"
void (*sig_info[NSIG])(int, siginfo_t *, struct uml_pt_regs *) = {
void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
[SIGTRAP] = relay_signal,
[SIGFPE] = relay_signal,
[SIGILL] = relay_signal,

2
arch/um/os-Linux/start_up.c
View File

@ -15,6 +15,8 @@
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <asm/unistd.h>
#include <init.h>
#include <os.h>

1
arch/x86/Kconfig
View File

@ -120,6 +120,7 @@ config X86
select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
select OLD_SIGACTION if X86_32
select COMPAT_OLD_SIGACTION if IA32_EMULATION
select RTC_LIB
config INSTRUCTION_DECODER
def_bool y

1
arch/x86/include/asm/cpufeature.h
View File

@ -100,6 +100,7 @@
#define X86_FEATURE_AMD_DCM (3*32+27) /* multi-node processor */
#define X86_FEATURE_APERFMPERF (3*32+28) /* APERFMPERF */
#define X86_FEATURE_EAGER_FPU (3*32+29) /* "eagerfpu" Non lazy FPU restore */
#define X86_FEATURE_NONSTOP_TSC_S3 (3*32+30) /* TSC doesn't stop in S3 state */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */

12
arch/x86/kernel/cpu/intel.c
View File

@ -96,6 +96,18 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
sched_clock_stable = 1;
}
/* Penwell and Cloverview have the TSC which doesn't sleep on S3 */
if (c->x86 == 6) {
switch (c->x86_model) {
case 0x27: /* Penwell */
case 0x35: /* Cloverview */
set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC_S3);
break;
default:
break;
}
}
/*
* There is a known erratum on Pentium III and Core Solo
* and Core Duo CPUs.

69
arch/x86/kernel/rtc.c
View File

@ -13,6 +13,7 @@
#include <asm/x86_init.h>
#include <asm/time.h>
#include <asm/mrst.h>
#include <asm/rtc.h>
#ifdef CONFIG_X86_32
/*
@ -36,70 +37,24 @@ EXPORT_SYMBOL(rtc_lock);
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
int mach_set_rtc_mmss(unsigned long nowtime)
{
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
unsigned long flags;
struct rtc_time tm;
int retval = 0;
spin_lock_irqsave(&rtc_lock, flags);
/* tell the clock it's being set */
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
/* stop and reset prescaler */
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
cmos_minutes = bcd2bin(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
/* correct for half hour time zone */
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30;
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
real_seconds = bin2bcd(real_seconds);
real_minutes = bin2bcd(real_minutes);
}
CMOS_WRITE(real_seconds, RTC_SECONDS);
CMOS_WRITE(real_minutes, RTC_MINUTES);
rtc_time_to_tm(nowtime, &tm);
if (!rtc_valid_tm(&tm)) {
retval = set_rtc_time(&tm);
if (retval)
printk(KERN_ERR "%s: RTC write failed with error %d\n",
__FUNCTION__, retval);
} else {
printk_once(KERN_NOTICE
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
printk(KERN_ERR
"%s: Invalid RTC value: write of %lx to RTC failed\n",
__FUNCTION__, nowtime);
retval = -EINVAL;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock_irqrestore(&rtc_lock, flags);
return retval;
}

6
arch/x86/kernel/tsc.c
View File

@ -768,7 +768,8 @@ static cycle_t read_tsc(struct clocksource *cs)
static void resume_tsc(struct clocksource *cs)
{
clocksource_tsc.cycle_last = 0;
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
clocksource_tsc.cycle_last = 0;
}
static struct clocksource clocksource_tsc = {
@ -939,6 +940,9 @@ static int __init init_tsc_clocksource(void)
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
}
if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
/*
* Trust the results of the earlier calibration on systems
* exporting a reliable TSC.

24
arch/x86/platform/efi/efi.c
View File

@ -48,6 +48,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/x86_init.h>
#include <asm/rtc.h>
#define EFI_DEBUG 1
@ -258,10 +259,10 @@ static efi_status_t __init phys_efi_get_time(efi_time_t *tm,
int efi_set_rtc_mmss(unsigned long nowtime)
{
int real_seconds, real_minutes;
efi_status_t status;
efi_time_t eft;
efi_time_cap_t cap;
struct rtc_time tm;
status = efi.get_time(&eft, &cap);
if (status != EFI_SUCCESS) {
@ -269,13 +270,20 @@ int efi_set_rtc_mmss(unsigned long nowtime)
return -1;
}
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - eft.minute) + 15)/30) & 1)
real_minutes += 30;
real_minutes %= 60;
eft.minute = real_minutes;
eft.second = real_seconds;
rtc_time_to_tm(nowtime, &tm);
if (!rtc_valid_tm(&tm)) {
eft.year = tm.tm_year + 1900;
eft.month = tm.tm_mon + 1;
eft.day = tm.tm_mday;
eft.minute = tm.tm_min;
eft.second = tm.tm_sec;
eft.nanosecond = 0;
} else {
printk(KERN_ERR
"%s: Invalid EFI RTC value: write of %lx to EFI RTC failed\n",
__FUNCTION__, nowtime);
return -1;
}
status = efi.set_time(&eft);
if (status != EFI_SUCCESS) {

42
arch/x86/platform/mrst/vrtc.c
View File

@ -85,27 +85,35 @@ unsigned long vrtc_get_time(void)
return mktime(year, mon, mday, hour, min, sec);
}
/* Only care about the minutes and seconds */
int vrtc_set_mmss(unsigned long nowtime)
{
int real_sec, real_min;
unsigned long flags;
int vrtc_min;
struct rtc_time tm;
int year;
int retval = 0;
spin_lock_irqsave(&rtc_lock, flags);
vrtc_min = vrtc_cmos_read(RTC_MINUTES);
real_sec = nowtime % 60;
real_min = nowtime / 60;
if (((abs(real_min - vrtc_min) + 15)/30) & 1)
real_min += 30;
real_min %= 60;
vrtc_cmos_write(real_sec, RTC_SECONDS);
vrtc_cmos_write(real_min, RTC_MINUTES);
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
rtc_time_to_tm(nowtime, &tm);
if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
/*
* tm.year is the number of years since 1900, and the
* vrtc need the years since 1972.
*/
year = tm.tm_year - 72;
spin_lock_irqsave(&rtc_lock, flags);
vrtc_cmos_write(year, RTC_YEAR);
vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
spin_unlock_irqrestore(&rtc_lock, flags);
} else {
printk(KERN_ERR
"%s: Invalid vRTC value: write of %lx to vRTC failed\n",
__FUNCTION__, nowtime);
retval = -EINVAL;
}
return retval;
}
void __init mrst_rtc_init(void)

1
drivers/clocksource/Makefile
View File

@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o

211
drivers/clocksource/bcm_kona_timer.c Normal file
View File

@ -0,0 +1,211 @@
/*
* Copyright (C) 2012 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/clockchips.h>
#include <linux/types.h>
#include <linux/io.h>
#include <asm/mach/time.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#define KONA_GPTIMER_STCS_OFFSET 0x00000000
#define KONA_GPTIMER_STCLO_OFFSET 0x00000004
#define KONA_GPTIMER_STCHI_OFFSET 0x00000008
#define KONA_GPTIMER_STCM0_OFFSET 0x0000000C
#define KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT 0
#define KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT 4
struct kona_bcm_timers {
int tmr_irq;
void __iomem *tmr_regs;
};
static struct kona_bcm_timers timers;
static u32 arch_timer_rate;
/*
* We use the peripheral timers for system tick, the cpu global timer for
* profile tick
*/
static void kona_timer_disable_and_clear(void __iomem *base)
{
uint32_t reg;
/*
* clear and disable interrupts
* We are using compare/match register 0 for our system interrupts
*/
reg = readl(base + KONA_GPTIMER_STCS_OFFSET);
/* Clear compare (0) interrupt */
reg |= 1 << KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT;
/* disable compare */
reg &= ~(1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
writel(reg, base + KONA_GPTIMER_STCS_OFFSET);
}
static void
kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
{
void __iomem *base = IOMEM(timer_base);
int loop_limit = 4;
/*
* Read 64-bit free running counter
* 1. Read hi-word
* 2. Read low-word
* 3. Read hi-word again
* 4.1
* if new hi-word is not equal to previously read hi-word, then
* start from #1
* 4.2
* if new hi-word is equal to previously read hi-word then stop.
*/
while (--loop_limit) {
*msw = readl(base + KONA_GPTIMER_STCHI_OFFSET);
*lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET);
if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET))
break;
}
if (!loop_limit) {
pr_err("bcm_kona_timer: getting counter failed.\n");
pr_err(" Timer will be impacted\n");
}
return;
}
static const struct of_device_id bcm_timer_ids[] __initconst = {
{.compatible = "bcm,kona-timer"},
{},
};
static void __init kona_timers_init(void)
{
struct device_node *node;
u32 freq;
node = of_find_matching_node(NULL, bcm_timer_ids);
if (!node)
panic("No timer");
if (!of_property_read_u32(node, "clock-frequency", &freq))
arch_timer_rate = freq;
else
panic("clock-frequency not set in the .dts file");
/* Setup IRQ numbers */
timers.tmr_irq = irq_of_parse_and_map(node, 0);
/* Setup IO addresses */
timers.tmr_regs = of_iomap(node, 0);
kona_timer_disable_and_clear(timers.tmr_regs);
}
static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused)
{
/*
* timer (0) is disabled by the timer interrupt already
* so, here we reload the next event value and re-enable
* the timer.
*
* This way, we are potentially losing the time between
* timer-interrupt->set_next_event. CPU local timers, when
* they come in should get rid of skew.
*/
uint32_t lsw, msw;
uint32_t reg;
kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
/* Load the "next" event tick value */
writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET);
/* Enable compare */
reg = readl(timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
reg |= (1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
writel(reg, timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
return 0;
}
static void kona_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *unused)
{
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
/* by default mode is one shot don't do any thing */
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
kona_timer_disable_and_clear(timers.tmr_regs);
}
}
static struct clock_event_device kona_clockevent_timer = {
.name = "timer 1",
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = kona_timer_set_next_event,
.set_mode = kona_timer_set_mode
};
static void __init kona_timer_clockevents_init(void)
{
kona_clockevent_timer.cpumask = cpumask_of(0);
clockevents_config_and_register(&kona_clockevent_timer,
arch_timer_rate, 6, 0xffffffff);
}
static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &kona_clockevent_timer;
kona_timer_disable_and_clear(timers.tmr_regs);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction kona_timer_irq = {
.name = "Kona Timer Tick",
.flags = IRQF_TIMER,
.handler = kona_timer_interrupt,
};
static void __init kona_timer_init(void)
{
kona_timers_init();
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
}
CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
kona_timer_init);

8
drivers/input/keyboard/tc3589x-keypad.c
View File

@ -70,8 +70,6 @@
#define TC3589x_EVT_INT_CLR 0x2
#define TC3589x_KBD_INT_CLR 0x1
#define TC3589x_KBD_KEYMAP_SIZE 64
/**
* struct tc_keypad - data structure used by keypad driver
* @tc3589x: pointer to tc35893
@ -88,7 +86,7 @@ struct tc_keypad {
const struct tc3589x_keypad_platform_data *board;
unsigned int krow;
unsigned int kcol;
unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
unsigned short *keymap;
bool keypad_stopped;
};
@ -338,12 +336,14 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
keypad->keymap, input);
NULL, input);
if (error) {
dev_err(&pdev->dev, "Failed to build keymap\n");
goto err_free_mem;
}
keypad->keymap = input->keycode;
input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);

85
drivers/input/mouse/alps.c
View File

@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
f->y_map |= (p[5] & 0x20) << 6;
}
static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
{
f->first_mp = !!(p[0] & 0x02);
f->is_mp = !!(p[0] & 0x20);
f->fingers = ((p[0] & 0x6) >> 1 |
(p[0] & 0x10) >> 2);
f->x_map = ((p[2] & 0x60) >> 5) |
((p[4] & 0x7f) << 2) |
((p[5] & 0x7f) << 9) |
((p[3] & 0x07) << 16) |
((p[3] & 0x70) << 15) |
((p[0] & 0x01) << 22);
f->y_map = (p[1] & 0x7f) |
((p[2] & 0x1f) << 7);
f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
alps_decode_buttons_v3(f, p);
}
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
if (priv->proto_version != ALPS_PROTO_V5 &&
psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
@ -994,8 +1018,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
return 0;
}
static int alps_enter_command_mode(struct psmouse *psmouse,
unsigned char *resp)
static int alps_enter_command_mode(struct psmouse *psmouse)
{
unsigned char param[4];
@ -1004,14 +1027,12 @@ static int alps_enter_command_mode(struct psmouse *psmouse,
return -1;
}
if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
param[0] != 0x73) {
psmouse_dbg(psmouse,
"unknown response while entering command mode\n");
return -1;
}
if (resp)
*resp = param[2];
return 0;
}
@ -1176,7 +1197,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse,
{
int reg_val, ret = -1;
if (alps_enter_command_mode(psmouse, NULL))
if (alps_enter_command_mode(psmouse))
return -1;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
@ -1216,7 +1237,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base)
{
int ret = -EIO, reg_val;
if (alps_enter_command_mode(psmouse, NULL))
if (alps_enter_command_mode(psmouse))
goto error;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
@ -1279,7 +1300,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
* supported by this driver. If bit 1 isn't set the packet
* format is different.
*/
if (alps_enter_command_mode(psmouse, NULL) ||
if (alps_enter_command_mode(psmouse) ||
alps_command_mode_write_reg(psmouse,
reg_base + 0x08, 0x82) ||
alps_exit_command_mode(psmouse))
@ -1306,7 +1327,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse)
alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
goto error;
if (alps_enter_command_mode(psmouse, NULL) ||
if (alps_enter_command_mode(psmouse) ||
alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
@ -1381,7 +1402,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
priv->flags &= ~ALPS_DUALPOINT;
}
if (alps_enter_command_mode(psmouse, NULL) ||
if (alps_enter_command_mode(psmouse) ||
alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
goto error;
@ -1431,7 +1452,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse)
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
if (alps_enter_command_mode(psmouse, NULL))
if (alps_enter_command_mode(psmouse))
goto error;
if (alps_absolute_mode_v4(psmouse)) {
@ -1499,6 +1520,23 @@ error:
return -1;
}
static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[2];
/* This is dolphin "v1" as empirically defined by florin9doi */
param[0] = 0x64;
param[1] = 0x28;
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
return -1;
return 0;
}
static void alps_set_defaults(struct alps_data *priv)
{
priv->byte0 = 0x8f;
@ -1532,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv)
priv->nibble_commands = alps_v4_nibble_commands;
priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
case ALPS_PROTO_V5:
priv->hw_init = alps_hw_init_dolphin_v1;
priv->process_packet = alps_process_packet_v3;
priv->decode_fields = alps_decode_dolphin;
priv->set_abs_params = alps_set_abs_params_mt;
priv->nibble_commands = alps_v3_nibble_commands;
priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
priv->byte0 = 0xc8;
priv->mask0 = 0xc8;
priv->flags = 0;
priv->x_max = 1360;
priv->y_max = 660;
priv->x_bits = 23;
priv->y_bits = 12;
break;
}
}
@ -1591,6 +1644,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
return -EIO;
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
return 0;
} else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
ec[0] == 0x73 && ec[1] == 0x01) {
priv->proto_version = ALPS_PROTO_V5;
alps_set_defaults(priv);
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x08) {
priv->proto_version = ALPS_PROTO_V3;

1
drivers/input/mouse/alps.h
View File

@ -16,6 +16,7 @@
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
#define ALPS_PROTO_V5 5
/**
* struct alps_model_info - touchpad ID table

19
drivers/input/mouse/cypress_ps2.c
View File

@ -236,6 +236,13 @@ static int cypress_read_fw_version(struct psmouse *psmouse)
cytp->fw_version = param[2] & FW_VERSION_MASX;
cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
/*
* Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to
* CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594.
*/
if (cytp->fw_version >= 11)
cytp->tp_metrics_supported = 0;
psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
cytp->tp_metrics_supported);
@ -258,6 +265,9 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse)
cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
if (!cytp->tp_metrics_supported)
return 0;
memset(param, 0, sizeof(param));
if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
/* Update trackpad parameters. */
@ -315,18 +325,15 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse)
static int cypress_query_hardware(struct psmouse *psmouse)
{
struct cytp_data *cytp = psmouse->private;
int ret;
ret = cypress_read_fw_version(psmouse);
if (ret)
return ret;
if (cytp->tp_metrics_supported) {
ret = cypress_read_tp_metrics(psmouse);
if (ret)
return ret;
}
ret = cypress_read_tp_metrics(psmouse);
if (ret)
return ret;
return 0;
}

4
drivers/input/tablet/wacom_wac.c
View File

@ -2017,6 +2017,9 @@ static const struct wacom_features wacom_features_0x100 =
static const struct wacom_features wacom_features_0x101 =
{ "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10D =
{ "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@ -2201,6 +2204,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
{ USB_DEVICE_WACOM(0x10D) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },

7
drivers/input/touchscreen/ads7846.c
View File

@ -236,7 +236,12 @@ static void __ads7846_disable(struct ads7846 *ts)
/* Must be called with ts->lock held */
static void __ads7846_enable(struct ads7846 *ts)
{
regulator_enable(ts->reg);
int error;
error = regulator_enable(ts->reg);
if (error != 0)
dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
ads7846_restart(ts);
}

34
drivers/input/touchscreen/mms114.c
View File

@ -314,15 +314,27 @@ static int mms114_start(struct mms114_data *data)
struct i2c_client *client = data->client;
int error;
if (data->core_reg)
regulator_enable(data->core_reg);
if (data->io_reg)
regulator_enable(data->io_reg);
error = regulator_enable(data->core_reg);
if (error) {
dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
return error;
}
error = regulator_enable(data->io_reg);
if (error) {
dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
regulator_disable(data->core_reg);
return error;
}
mdelay(MMS114_POWERON_DELAY);
error = mms114_setup_regs(data);
if (error < 0)
if (error < 0) {
regulator_disable(data->io_reg);
regulator_disable(data->core_reg);
return error;
}
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(true);
@ -335,16 +347,20 @@ static int mms114_start(struct mms114_data *data)
static void mms114_stop(struct mms114_data *data)
{
struct i2c_client *client = data->client;
int error;
disable_irq(client->irq);
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(false);
if (data->io_reg)
regulator_disable(data->io_reg);
if (data->core_reg)
regulator_disable(data->core_reg);
error = regulator_disable(data->io_reg);
if (error)
dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
error = regulator_disable(data->core_reg);
if (error)
dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
}
static int mms114_input_open(struct input_dev *dev)

4
drivers/isdn/i4l/isdn_tty.c
View File

@ -902,7 +902,9 @@ isdn_tty_send_msg(modem_info *info, atemu *m, char *msg)
int j;
int l;
l = strlen(msg);
l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg)
+ sizeof(cmd.parm.cmsg.para) - 2);
if (!l) {
isdn_tty_modem_result(RESULT_ERROR, info);
return;

5
drivers/net/bonding/bond_main.c
View File

@ -1964,7 +1964,6 @@ static int __bond_release_one(struct net_device *bond_dev,
}
block_netpoll_tx();
call_netdevice_notifiers(NETDEV_RELEASE, bond_dev);
write_lock_bh(&bond->lock);
slave = bond_get_slave_by_dev(bond, slave_dev);
@ -2066,8 +2065,10 @@ static int __bond_release_one(struct net_device *bond_dev,
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
if (bond->slave_cnt == 0)
if (bond->slave_cnt == 0) {
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
}
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&

17
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
View File

@ -8647,7 +8647,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC6,
&rx_tx_in_reset);
if (!rx_tx_in_reset) {
if ((!rx_tx_in_reset) &&
(params->link_flags &
PHY_INITIALIZED)) {
bnx2x_warpcore_reset_lane(bp, phy, 1);
bnx2x_warpcore_config_sfi(phy, params);
bnx2x_warpcore_reset_lane(bp, phy, 0);
@ -12527,6 +12529,8 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_NONE;
vars->phy_flags = 0;
vars->check_kr2_recovery_cnt = 0;
params->link_flags = PHY_INITIALIZED;
/* Driver opens NIG-BRB filters */
bnx2x_set_rx_filter(params, 1);
/* Check if link flap can be avoided */
@ -12691,6 +12695,7 @@ int bnx2x_lfa_reset(struct link_params *params,
struct bnx2x *bp = params->bp;
vars->link_up = 0;
vars->phy_flags = 0;
params->link_flags &= ~PHY_INITIALIZED;
if (!params->lfa_base)
return bnx2x_link_reset(params, vars, 1);
/*
@ -13411,6 +13416,7 @@ static void bnx2x_disable_kr2(struct link_params *params,
vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
bnx2x_update_link_attr(params, vars->link_attr_sync);
vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT;
/* Restart AN on leading lane */
bnx2x_warpcore_restart_AN_KR(phy, params);
}
@ -13439,6 +13445,15 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
return;
}
/* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
* since some switches tend to reinit the AN process and clear the
* advertised BP/NP after ~2 seconds causing the KR2 to be disabled
* and recovered many times
*/
if (vars->check_kr2_recovery_cnt > 0) {
vars->check_kr2_recovery_cnt--;
return;
}
lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);

4
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
View File

@ -309,6 +309,7 @@ struct link_params {
req_flow_ctrl is set to AUTO */
u16 link_flags;
#define LINK_FLAGS_INT_DISABLED (1<<0)
#define PHY_INITIALIZED (1<<1)
u32 lfa_base;
};
@ -342,7 +343,8 @@ struct link_vars {
u32 link_status;
u32 eee_status;
u8 fault_detected;
u8 rsrv1;
u8 check_kr2_recovery_cnt;
#define CHECK_KR2_RECOVERY_CNT 5
u16 periodic_flags;
#define PERIODIC_FLAGS_LINK_EVENT 0x0001

14
drivers/net/ethernet/broadcom/tg3.c
View File

@ -1869,6 +1869,8 @@ static void tg3_link_report(struct tg3 *tp)
tg3_ump_link_report(tp);
}
tp->link_up = netif_carrier_ok(tp->dev);
}
static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
@ -2522,12 +2524,6 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
return err;
}
static void tg3_carrier_on(struct tg3 *tp)
{
netif_carrier_on(tp->dev);
tp->link_up = true;
}
static void tg3_carrier_off(struct tg3 *tp)
{
netif_carrier_off(tp->dev);
@ -2553,7 +2549,7 @@ static int tg3_phy_reset(struct tg3 *tp)
return -EBUSY;
if (netif_running(tp->dev) && tp->link_up) {
tg3_carrier_off(tp);
netif_carrier_off(tp->dev);
tg3_link_report(tp);
}
@ -4262,9 +4258,9 @@ static bool tg3_test_and_report_link_chg(struct tg3 *tp, int curr_link_up)
{
if (curr_link_up != tp->link_up) {
if (curr_link_up) {
tg3_carrier_on(tp);
netif_carrier_on(tp->dev);
} else {
tg3_carrier_off(tp);
netif_carrier_off(tp->dev);
if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
tp->phy_flags &= ~TG3_PHYFLG_PARALLEL_DETECT;
}

1
drivers/net/ethernet/emulex/benet/be.h
View File

@ -349,6 +349,7 @@ struct be_adapter {
struct pci_dev *pdev;
struct net_device *netdev;
u8 __iomem *csr; /* CSR BAR used only for BE2/3 */
u8 __iomem *db; /* Door Bell */
struct mutex mbox_lock; /* For serializing mbox cmds to BE card */

36
drivers/net/ethernet/emulex/benet/be_cmds.c
View File

@ -473,19 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
return 0;
}
static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
static u16 be_POST_stage_get(struct be_adapter *adapter)
{
u32 sem;
u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
SLIPORT_SEMAPHORE_OFFSET_BE;
pci_read_config_dword(adapter->pdev, reg, &sem);
*stage = sem & POST_STAGE_MASK;
if ((sem >> POST_ERR_SHIFT) & POST_ERR_MASK)
return -1;
if (BEx_chip(adapter))
sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
else
return 0;
pci_read_config_dword(adapter->pdev,
SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
return sem & POST_STAGE_MASK;
}
int lancer_wait_ready(struct be_adapter *adapter)
@ -579,19 +577,17 @@ int be_fw_wait_ready(struct be_adapter *adapter)
}
do {
status = be_POST_stage_get(adapter, &stage);
if (status) {
dev_err(dev, "POST error; stage=0x%x\n", stage);
return -1;
} else if (stage != POST_STAGE_ARMFW_RDY) {
if (msleep_interruptible(2000)) {
dev_err(dev, "Waiting for POST aborted\n");
return -EINTR;
}
timeout += 2;
} else {
stage = be_POST_stage_get(adapter);
if (stage == POST_STAGE_ARMFW_RDY)
return 0;
dev_info(dev, "Waiting for POST, %ds elapsed\n",
timeout);
if (msleep_interruptible(2000)) {
dev_err(dev, "Waiting for POST aborted\n");
return -EINTR;
}
timeout += 2;
} while (timeout < 60);
dev_err(dev, "POST timeout; stage=0x%x\n", stage);

4
drivers/net/ethernet/emulex/benet/be_hw.h
View File

@ -32,8 +32,8 @@
#define MPU_EP_CONTROL 0
/********** MPU semphore: used for SH & BE *************/
#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c
#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94
#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */
#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */
#define POST_STAGE_MASK 0x0000FFFF
#define POST_ERR_MASK 0x1
#define POST_ERR_SHIFT 31

10
drivers/net/ethernet/emulex/benet/be_main.c
View File

@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev)
static void be_unmap_pci_bars(struct be_adapter *adapter)
{
if (adapter->csr)
pci_iounmap(adapter->pdev, adapter->csr);
if (adapter->db)
pci_iounmap(adapter->pdev, adapter->db);
}
@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter)
adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
SLI_INTF_IF_TYPE_SHIFT;
if (BEx_chip(adapter) && be_physfn(adapter)) {
adapter->csr = pci_iomap(adapter->pdev, 2, 0);
if (adapter->csr == NULL)
return -ENOMEM;
}
addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
if (addr == NULL)
goto pci_map_err;
@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
pci_restore_state(pdev);
/* Check if card is ok and fw is ready */
dev_info(&adapter->pdev->dev,
"Waiting for FW to be ready after EEH reset\n");
status = be_fw_wait_ready(adapter);
if (status)
return PCI_ERS_RESULT_DISCONNECT;

13
drivers/net/ethernet/intel/e1000e/ethtool.c
View File

@ -36,6 +36,7 @@
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/mdio.h>
#include <linux/pm_runtime.h>
#include "e1000.h"
@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev,
return 0;
}
static int e1000e_ethtool_begin(struct net_device *netdev)
{
return pm_runtime_get_sync(netdev->dev.parent);
}
static void e1000e_ethtool_complete(struct net_device *netdev)
{
pm_runtime_put_sync(netdev->dev.parent);
}
static const struct ethtool_ops e1000_ethtool_ops = {
.begin = e1000e_ethtool_begin,
.complete = e1000e_ethtool_complete,
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,

71
drivers/net/ethernet/intel/e1000e/ich8lan.c
View File

@ -781,6 +781,59 @@ release:
return ret_val;
}
/**
* e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
* @hw: pointer to the HW structure
* @link: link up bool flag
*
* When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
* preventing further DMA write requests. Workaround the issue by disabling
* the de-assertion of the clock request when in 1Gpbs mode.
**/
static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
{
u32 fextnvm6 = er32(FEXTNVM6);
s32 ret_val = 0;
if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
u16 kmrn_reg;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
ret_val =
e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
&kmrn_reg);
if (ret_val)
goto release;
ret_val =
e1000e_write_kmrn_reg_locked(hw,
E1000_KMRNCTRLSTA_K1_CONFIG,
kmrn_reg &
~E1000_KMRNCTRLSTA_K1_ENABLE);
if (ret_val)
goto release;
usleep_range(10, 20);
ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
ret_val =
e1000e_write_kmrn_reg_locked(hw,
E1000_KMRNCTRLSTA_K1_CONFIG,
kmrn_reg);
release:
hw->phy.ops.release(hw);
} else {
/* clear FEXTNVM6 bit 8 on link down or 10/100 */
ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
}
return ret_val;
}
/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
return ret_val;
}
/* Work-around I218 hang issue */
if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
(hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
ret_val = e1000_k1_workaround_lpt_lp(hw, link);
if (ret_val)
return ret_val;
}
/* Clear link partner's EEE ability */
hw->dev_spec.ich8lan.eee_lp_ability = 0;
@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
phy_ctrl = er32(PHY_CTRL);
phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
if (hw->phy.type == e1000_phy_i217) {
u16 phy_reg;
u16 phy_reg, device_id = hw->adapter->pdev->device;
if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
(device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
u32 fextnvm6 = er32(FEXTNVM6);
ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
}
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)

2
drivers/net/ethernet/intel/e1000e/ich8lan.h
View File

@ -92,6 +92,8 @@
#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7

82
drivers/net/ethernet/intel/e1000e/netdev.c
View File

@ -4303,6 +4303,7 @@ static int e1000_open(struct net_device *netdev)
netif_start_queue(netdev);
adapter->idle_check = true;
hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
/* fire a link status change interrupt to start the watchdog */
@ -4662,6 +4663,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
int ret_val;
pm_runtime_get_sync(&adapter->pdev->dev);
ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
@ -4672,6 +4674,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
if (ret_val)
e_warn("Error reading PHY register\n");
pm_runtime_put_sync(&adapter->pdev->dev);
} else {
/* Do not read PHY registers if link is not up
* Set values to typical power-on defaults
@ -5887,8 +5890,7 @@ release:
return retval;
}
static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
bool runtime)
static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
@ -5912,10 +5914,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
}
e1000e_reset_interrupt_capability(adapter);
retval = pci_save_state(pdev);
if (retval)
return retval;
status = er32(STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
@ -5971,13 +5969,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
ew32(WUFC, 0);
}
*enable_wake = !!wufc;
/* make sure adapter isn't asleep if manageability is enabled */
if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
(hw->mac.ops.check_mng_mode(hw)))
*enable_wake = true;
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
@ -5986,27 +5977,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
*/
e1000e_release_hw_control(adapter);
pci_disable_device(pdev);
return 0;
}
static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
{
if (sleep && wake) {
pci_prepare_to_sleep(pdev);
return;
}
pci_wake_from_d3(pdev, wake);
pci_set_power_state(pdev, PCI_D3hot);
}
static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
bool wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
pci_clear_master(pdev);
/* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
@ -6021,12 +5992,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
(devctl & ~PCI_EXP_DEVCTL_CERE));
e1000_power_off(pdev, sleep, wake);
pci_save_state(pdev);
pci_prepare_to_sleep(pdev);
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
} else {
e1000_power_off(pdev, sleep, wake);
}
return 0;
}
#ifdef CONFIG_PCIEASPM
@ -6084,9 +6056,7 @@ static int __e1000_resume(struct pci_dev *pdev)
if (aspm_disable_flag)
e1000e_disable_aspm(pdev, aspm_disable_flag);
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_save_state(pdev);
pci_set_master(pdev);
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
@ -6152,14 +6122,8 @@ static int __e1000_resume(struct pci_dev *pdev)
static int e1000_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int retval;
bool wake;
retval = __e1000_shutdown(pdev, &wake, false);
if (!retval)
e1000_complete_shutdown(pdev, true, wake);
return retval;
return __e1000_shutdown(pdev, false);
}
static int e1000_resume(struct device *dev)
@ -6182,13 +6146,10 @@ static int e1000_runtime_suspend(struct device *dev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
if (e1000e_pm_ready(adapter)) {
bool wake;
if (!e1000e_pm_ready(adapter))
return 0;
__e1000_shutdown(pdev, &wake, true);
}
return 0;
return __e1000_shutdown(pdev, true);
}
static int e1000_idle(struct device *dev)
@ -6226,12 +6187,7 @@ static int e1000_runtime_resume(struct device *dev)
static void e1000_shutdown(struct pci_dev *pdev)
{
bool wake = false;
__e1000_shutdown(pdev, &wake, false);
if (system_state == SYSTEM_POWER_OFF)
e1000_complete_shutdown(pdev, false, wake);
__e1000_shutdown(pdev, false);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@ -6352,9 +6308,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
pci_set_master(pdev);
pdev->state_saved = true;
pci_restore_state(pdev);
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
@ -6783,7 +6739,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
(hw->mac.ops.check_mng_mode(hw)))
device_wakeup_enable(&pdev->dev);
/* save off EEPROM version number */
e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);

1
drivers/net/ethernet/intel/e1000e/regs.h
View File

@ -42,6 +42,7 @@
#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */
#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */
#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */
#define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */
#define E1000_FCT 0x00030 /* Flow Control Type - RW */
#define E1000_VET 0x00038 /* VLAN Ether Type - RW */

11
drivers/net/ethernet/intel/igb/e1000_82575.c
View File

@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
switch (hw->phy.type) {
case e1000_phy_i210:
case e1000_phy_m88:
if (hw->phy.id == I347AT4_E_PHY_ID ||
hw->phy.id == M88E1112_E_PHY_ID)
switch (hw->phy.id) {
case I347AT4_E_PHY_ID:
case M88E1112_E_PHY_ID:
case I210_I_PHY_ID:
ret_val = igb_copper_link_setup_m88_gen2(hw);
else
break;
default:
ret_val = igb_copper_link_setup_m88(hw);
break;
}
break;
case e1000_phy_igp_3:
ret_val = igb_copper_link_setup_igp(hw);

2
drivers/net/ethernet/intel/igb/igb.h
View File

@ -447,7 +447,7 @@ struct igb_adapter {
#endif
struct i2c_algo_bit_data i2c_algo;
struct i2c_adapter i2c_adap;
struct igb_i2c_client_list *i2c_clients;
struct i2c_client *i2c_client;
};
#define IGB_FLAG_HAS_MSI (1 << 0)

14
drivers/net/ethernet/intel/igb/igb_hwmon.c
View File

@ -39,6 +39,10 @@
#include <linux/pci.h>
#ifdef CONFIG_IGB_HWMON
struct i2c_board_info i350_sensor_info = {
I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
};
/* hwmon callback functions */
static ssize_t igb_hwmon_show_location(struct device *dev,
struct device_attribute *attr,
@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter)
unsigned int i;
int n_attrs;
int rc = 0;
struct i2c_client *client = NULL;
/* If this method isn't defined we don't support thermals */
if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter)
if (rc)
goto exit;
/* init i2c_client */
client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
if (client == NULL) {
dev_info(&adapter->pdev->dev,
"Failed to create new i2c device..\n");
goto exit;
}
adapter->i2c_client = client;
/* Allocation space for max attributes
* max num sensors * values (loc, temp, max, caution)
*/

76
drivers/net/ethernet/intel/igb/igb_main.c
View File

@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter)
return;
}
static const struct i2c_board_info i350_sensor_info = {
I2C_BOARD_INFO("i350bb", 0Xf8),
};
/* igb_init_i2c - Init I2C interface
* @adapter: pointer to adapter structure
*
@ -6227,13 +6223,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring,
/* If we spanned a buffer we have a huge mess so test for it */
BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
/* Guarantee this function can be used by verifying buffer sizes */
BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD +
NET_IP_ALIGN +
IGB_TS_HDR_LEN +
ETH_FRAME_LEN +
ETH_FCS_LEN));
rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
page = rx_buffer->page;
prefetchw(page);
@ -7724,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
}
}
static DEFINE_SPINLOCK(i2c_clients_lock);
/* igb_get_i2c_client - returns matching client
* in adapters's client list.
* @adapter: adapter struct
* @dev_addr: device address of i2c needed.
*/
static struct i2c_client *
igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
{
ulong flags;
struct igb_i2c_client_list *client_list;
struct i2c_client *client = NULL;
struct i2c_board_info client_info = {
I2C_BOARD_INFO("igb", 0x00),
};
spin_lock_irqsave(&i2c_clients_lock, flags);
client_list = adapter->i2c_clients;
/* See if we already have an i2c_client */
while (client_list) {
if (client_list->client->addr == (dev_addr >> 1)) {
client = client_list->client;
goto exit;
} else {
client_list = client_list->next;
}
}
/* no client_list found, create a new one */
client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC);
if (client_list == NULL)
goto exit;
/* dev_addr passed to us is left-shifted by 1 bit
* i2c_new_device call expects it to be flush to the right.
*/
client_info.addr = dev_addr >> 1;
client_info.platform_data = adapter;
client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
if (client_list->client == NULL) {
dev_info(&adapter->pdev->dev,
"Failed to create new i2c device..\n");
goto err_no_client;
}
/* insert new client at head of list */
client_list->next = adapter->i2c_clients;
adapter->i2c_clients = client_list;
client = client_list->client;
goto exit;
err_no_client:
kfree(client_list);
exit:
spin_unlock_irqrestore(&i2c_clients_lock, flags);
return client;
}
/* igb_read_i2c_byte - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
@ -7798,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data)
{
struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
struct i2c_client *this_client = adapter->i2c_client;
s32 status;
u16 swfw_mask = 0;
@ -7835,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data)
{
struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
struct i2c_client *this_client = adapter->i2c_client;
s32 status;
u16 swfw_mask = E1000_SWFW_PHY0_SM;

55
drivers/net/ethernet/marvell/mv643xx_eth.c
View File

@ -1081,6 +1081,45 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq)
/* mii management interface *************************************************/
static void mv643xx_adjust_pscr(struct mv643xx_eth_private *mp)
{
u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL);
u32 autoneg_disable = FORCE_LINK_PASS |
DISABLE_AUTO_NEG_SPEED_GMII |
DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
DISABLE_AUTO_NEG_FOR_DUPLEX;
if (mp->phy->autoneg == AUTONEG_ENABLE) {
/* enable auto negotiation */
pscr &= ~autoneg_disable;
goto out_write;
}
pscr |= autoneg_disable;
if (mp->phy->speed == SPEED_1000) {
/* force gigabit, half duplex not supported */
pscr |= SET_GMII_SPEED_TO_1000;
pscr |= SET_FULL_DUPLEX_MODE;
goto out_write;
}
pscr &= ~SET_GMII_SPEED_TO_1000;
if (mp->phy->speed == SPEED_100)
pscr |= SET_MII_SPEED_TO_100;
else
pscr &= ~SET_MII_SPEED_TO_100;
if (mp->phy->duplex == DUPLEX_FULL)
pscr |= SET_FULL_DUPLEX_MODE;
else
pscr &= ~SET_FULL_DUPLEX_MODE;
out_write:
wrlp(mp, PORT_SERIAL_CONTROL, pscr);
}
static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id)
{
struct mv643xx_eth_shared_private *msp = dev_id;
@ -1499,6 +1538,7 @@ static int
mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
int ret;
if (mp->phy == NULL)
return -EINVAL;
@ -1508,7 +1548,10 @@ mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
*/
cmd->advertising &= ~ADVERTISED_1000baseT_Half;
return phy_ethtool_sset(mp->phy, cmd);
ret = phy_ethtool_sset(mp->phy, cmd);
if (!ret)
mv643xx_adjust_pscr(mp);
return ret;
}
static void mv643xx_eth_get_drvinfo(struct net_device *dev,
@ -2442,11 +2485,15 @@ static int mv643xx_eth_stop(struct net_device *dev)
static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
int ret;
if (mp->phy != NULL)
return phy_mii_ioctl(mp->phy, ifr, cmd);
if (mp->phy == NULL)
return -ENOTSUPP;
return -EOPNOTSUPP;
ret = phy_mii_ioctl(mp->phy, ifr, cmd);
if (!ret)
mv643xx_adjust_pscr(mp);
return ret;
}
static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)

2
drivers/net/ethernet/mellanox/mlx4/cq.c
View File

@ -226,7 +226,7 @@ void __mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn)
static void mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn)
{
u64 in_param;
u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {

86
drivers/net/ethernet/mellanox/mlx4/en_netdev.c
View File

@ -565,34 +565,38 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv)
struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_dev *dev = mdev->dev;
int qpn = priv->base_qpn;
u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
u64 mac;
en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
priv->dev->dev_addr);
mlx4_unregister_mac(dev, priv->port, mac);
if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) {
if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) {
mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
priv->dev->dev_addr);
mlx4_unregister_mac(dev, priv->port, mac);
} else {
struct mlx4_mac_entry *entry;
struct hlist_node *tmp;
struct hlist_head *bucket;
unsigned int mac_hash;
unsigned int i;
mac_hash = priv->dev->dev_addr[MLX4_EN_MAC_HASH_IDX];
bucket = &priv->mac_hash[mac_hash];
hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
if (ether_addr_equal_64bits(entry->mac,
priv->dev->dev_addr)) {
en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n",
priv->port, priv->dev->dev_addr, qpn);
for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) {
bucket = &priv->mac_hash[i];
hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
mac = mlx4_en_mac_to_u64(entry->mac);
en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
entry->mac);
mlx4_en_uc_steer_release(priv, entry->mac,
qpn, entry->reg_id);
mlx4_qp_release_range(dev, qpn, 1);
mlx4_unregister_mac(dev, priv->port, mac);
hlist_del_rcu(&entry->hlist);
kfree_rcu(entry, rcu);
break;
}
}
en_dbg(DRV, priv, "Releasing qp: port %d, qpn %d\n",
priv->port, qpn);
mlx4_qp_release_range(dev, qpn, 1);
priv->flags &= ~MLX4_EN_FLAG_FORCE_PROMISC;
}
}
@ -650,28 +654,10 @@ u64 mlx4_en_mac_to_u64(u8 *addr)
return mac;
}
static int mlx4_en_set_mac(struct net_device *dev, void *addr)
static int mlx4_en_do_set_mac(struct mlx4_en_priv *priv)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
struct sockaddr *saddr = addr;
if (!is_valid_ether_addr(saddr->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
queue_work(mdev->workqueue, &priv->mac_task);
return 0;
}
static void mlx4_en_do_set_mac(struct work_struct *work)
{
struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
mac_task);
struct mlx4_en_dev *mdev = priv->mdev;
int err = 0;
mutex_lock(&mdev->state_lock);
if (priv->port_up) {
/* Remove old MAC and insert the new one */
err = mlx4_en_replace_mac(priv, priv->base_qpn,
@ -683,7 +669,26 @@ static void mlx4_en_do_set_mac(struct work_struct *work)
} else
en_dbg(HW, priv, "Port is down while registering mac, exiting...\n");
return err;
}
static int mlx4_en_set_mac(struct net_device *dev, void *addr)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
struct sockaddr *saddr = addr;
int err;
if (!is_valid_ether_addr(saddr->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
mutex_lock(&mdev->state_lock);
err = mlx4_en_do_set_mac(priv);
mutex_unlock(&mdev->state_lock);
return err;
}
static void mlx4_en_clear_list(struct net_device *dev)
@ -1348,7 +1353,7 @@ static void mlx4_en_do_get_stats(struct work_struct *work)
queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
}
if (mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port]) {
queue_work(mdev->workqueue, &priv->mac_task);
mlx4_en_do_set_mac(priv);
mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port] = 0;
}
mutex_unlock(&mdev->state_lock);
@ -1828,9 +1833,11 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
}
#ifdef CONFIG_RFS_ACCEL
priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
if (!priv->dev->rx_cpu_rmap)
goto err;
if (priv->mdev->dev->caps.comp_pool) {
priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
if (!priv->dev->rx_cpu_rmap)
goto err;
}
#endif
return 0;
@ -2078,7 +2085,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
priv->msg_enable = MLX4_EN_MSG_LEVEL;
spin_lock_init(&priv->stats_lock);
INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);

8
drivers/net/ethernet/mellanox/mlx4/fw.c
View File

@ -787,6 +787,14 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
bmme_flags &= ~MLX4_BMME_FLAG_TYPE_2_WIN;
MLX4_PUT(outbox->buf, bmme_flags, QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
/* turn off device-managed steering capability if not enabled */
if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) {
MLX4_GET(field, outbox->buf,
QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
field &= 0x7f;
MLX4_PUT(outbox->buf, field,
QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
}
return 0;
}

2
drivers/net/ethernet/mellanox/mlx4/main.c
View File

@ -1555,7 +1555,7 @@ void __mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
void mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
{
u64 in_param;
u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, idx);

2
drivers/net/ethernet/mellanox/mlx4/mlx4.h
View File

@ -1235,7 +1235,7 @@ int mlx4_get_qp_per_mgm(struct mlx4_dev *dev);
static inline void set_param_l(u64 *arg, u32 val)
{
*((u32 *)arg) = val;
*arg = (*arg & 0xffffffff00000000ULL) | (u64) val;
}
static inline void set_param_h(u64 *arg, u32 val)

1
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
View File

@ -509,7 +509,6 @@ struct mlx4_en_priv {
struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
struct mlx4_qp drop_qp;
struct work_struct rx_mode_task;
struct work_struct mac_task;
struct work_struct watchdog_task;
struct work_struct linkstate_task;
struct delayed_work stats_task;

10
drivers/net/ethernet/mellanox/mlx4/mr.c
View File

@ -183,7 +183,7 @@ u32 __mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
static u32 mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
{
u64 in_param;
u64 in_param = 0;
u64 out_param;
int err;
@ -240,7 +240,7 @@ void __mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order)
static void mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order)
{
u64 in_param;
u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
@ -351,7 +351,7 @@ void __mlx4_mpt_release(struct mlx4_dev *dev, u32 index)
static void mlx4_mpt_release(struct mlx4_dev *dev, u32 index)
{
u64 in_param;
u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, index);
@ -374,7 +374,7 @@ int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
{
u64 param;
u64 param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&param, index);
@ -395,7 +395,7 @@ void __mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
static void mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
{
u64 in_param;
u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, index);

2
drivers/net/ethernet/mellanox/mlx4/pd.c
View File

@ -101,7 +101,7 @@ void __mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
{
u64 in_param;
u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {

8
drivers/net/ethernet/mellanox/mlx4/port.c
View File

@ -175,7 +175,7 @@ EXPORT_SYMBOL_GPL(__mlx4_register_mac);
int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac)
{
u64 out_param;
u64 out_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
@ -222,7 +222,7 @@ EXPORT_SYMBOL_GPL(__mlx4_unregister_mac);
void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac)
{
u64 out_param;
u64 out_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&out_param, port);
@ -361,7 +361,7 @@ out:
int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
{
u64 out_param;
u64 out_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
@ -406,7 +406,7 @@ out:
void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index)
{
u64 in_param;
u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {

8
drivers/net/ethernet/mellanox/mlx4/qp.c
View File

@ -222,7 +222,7 @@ int __mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align,
int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base)
{
u64 in_param;
u64 in_param = 0;
u64 out_param;
int err;
@ -255,7 +255,7 @@ void __mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
{
u64 in_param;
u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
@ -319,7 +319,7 @@ err_out:
static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn)
{
u64 param;
u64 param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&param, qpn);
@ -344,7 +344,7 @@ void __mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
{
u64 in_param;
u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, qpn);

3
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
View File

@ -2990,6 +2990,9 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
u8 steer_type_mask = 2;
enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
if (dev->caps.steering_mode != MLX4_STEERING_MODE_B0)
return -EINVAL;
qpn = vhcr->in_modifier & 0xffffff;
err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err)

2
drivers/net/ethernet/mellanox/mlx4/srq.c
View File

@ -149,7 +149,7 @@ void __mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn)
static void mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn)
{
u64 in_param;
u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, srqn);

4
drivers/net/ethernet/sfc/efx.h
View File

@ -171,9 +171,9 @@ static inline void efx_device_detach_sync(struct efx_nic *efx)
* TX scheduler is stopped when we're done and before
* netif_device_present() becomes false.
*/
netif_tx_lock(dev);
netif_tx_lock_bh(dev);
netif_device_detach(dev);
netif_tx_unlock(dev);
netif_tx_unlock_bh(dev);
}
#endif /* EFX_EFX_H */

2
drivers/net/ethernet/sfc/rx.c
View File

@ -215,7 +215,7 @@ static int efx_init_rx_buffers_page(struct efx_rx_queue *rx_queue)
rx_buf = efx_rx_buffer(rx_queue, index);
rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
rx_buf->u.page = page;
rx_buf->page_offset = page_offset;
rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN;
rx_buf->len = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN;
rx_buf->flags = EFX_RX_BUF_PAGE;
++rx_queue->added_count;

3
drivers/net/hippi/rrunner.c
View File

@ -202,6 +202,9 @@ static int rr_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
out:
if (rrpriv->evt_ring)
pci_free_consistent(pdev, EVT_RING_SIZE, rrpriv->evt_ring,
rrpriv->evt_ring_dma);
if (rrpriv->rx_ring)
pci_free_consistent(pdev, RX_TOTAL_SIZE, rrpriv->rx_ring,
rrpriv->rx_ring_dma);

1
drivers/net/macvlan.c
View File

@ -660,6 +660,7 @@ void macvlan_common_setup(struct net_device *dev)
ether_setup(dev);
dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
dev->priv_flags |= IFF_UNICAST_FLT;
dev->netdev_ops = &macvlan_netdev_ops;
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,

2
drivers/net/team/team.c
View File

@ -1138,6 +1138,8 @@ static int team_port_del(struct team *team, struct net_device *port_dev)
netdev_upper_dev_unlink(port_dev, dev);
team_port_disable_netpoll(port);
vlan_vids_del_by_dev(port_dev, dev);
dev_uc_unsync(port_dev, dev);
dev_mc_unsync(port_dev, dev);
dev_close(port_dev);
team_port_leave(team, port);

2
drivers/net/tun.c
View File

@ -747,6 +747,8 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
goto drop;
skb_orphan(skb);
nf_reset(skb);
/* Enqueue packet */
skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb);

1
drivers/net/vmxnet3/vmxnet3_drv.c
View File

@ -2958,6 +2958,7 @@ vmxnet3_probe_device(struct pci_dev *pdev,
adapter->num_rx_queues = num_rx_queues;
adapter->num_tx_queues = num_tx_queues;
adapter->rx_buf_per_pkt = 1;
size = sizeof(struct Vmxnet3_TxQueueDesc) * adapter->num_tx_queues;
size += sizeof(struct Vmxnet3_RxQueueDesc) * adapter->num_rx_queues;

6
drivers/net/vmxnet3/vmxnet3_ethtool.c
View File

@ -472,6 +472,12 @@ vmxnet3_set_ringparam(struct net_device *netdev,
VMXNET3_RX_RING_MAX_SIZE)
return -EINVAL;
/* if adapter not yet initialized, do nothing */
if (adapter->rx_buf_per_pkt == 0) {
netdev_err(netdev, "adapter not completely initialized, "
"ring size cannot be changed yet\n");
return -EOPNOTSUPP;
}
/* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */
new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) &

4
drivers/net/vmxnet3/vmxnet3_int.h
View File

@ -70,10 +70,10 @@
/*
* Version numbers
*/
#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k"
#define VMXNET3_DRIVER_VERSION_STRING "1.1.30.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00
#define VMXNET3_DRIVER_VERSION_NUM 0x01011E00
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */

10
drivers/net/vxlan.c
View File

@ -961,6 +961,8 @@ static netdev_tx_t vxlan_xmit(struct sk_buff *skb, struct net_device *dev)
iph->ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
tunnel_ip_select_ident(skb, old_iph, &rt->dst);
nf_reset(skb);
vxlan_set_owner(dev, skb);
/* See iptunnel_xmit() */
@ -1504,6 +1506,14 @@ static __net_init int vxlan_init_net(struct net *net)
static __net_exit void vxlan_exit_net(struct net *net)
{
struct vxlan_net *vn = net_generic(net, vxlan_net_id);
struct vxlan_dev *vxlan;
unsigned h;
rtnl_lock();
for (h = 0; h < VNI_HASH_SIZE; ++h)
hlist_for_each_entry(vxlan, &vn->vni_list[h], hlist)
dev_close(vxlan->dev);
rtnl_unlock();
if (vn->sock) {
sk_release_kernel(vn->sock->sk);

2
drivers/net/wireless/iwlwifi/dvm/sta.c
View File

@ -151,7 +151,7 @@ int iwl_send_add_sta(struct iwl_priv *priv,
sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : "");
if (!(flags & CMD_ASYNC)) {
cmd.flags |= CMD_WANT_SKB | CMD_WANT_HCMD;
cmd.flags |= CMD_WANT_SKB;
might_sleep();
}

2
drivers/net/wireless/iwlwifi/iwl-devtrace.h
View File

@ -363,7 +363,7 @@ TRACE_EVENT(iwlwifi_dev_hcmd,
__entry->flags = cmd->flags;
memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr));
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
if (!cmd->len[i])
continue;
memcpy((u8 *)__get_dynamic_array(hcmd) + offset,

3
drivers/net/wireless/iwlwifi/iwl-drv.c
View File

@ -1102,7 +1102,6 @@ void iwl_drv_stop(struct iwl_drv *drv)
/* shared module parameters */
struct iwl_mod_params iwlwifi_mod_params = {
.amsdu_size_8K = 1,
.restart_fw = 1,
.plcp_check = true,
.bt_coex_active = true,
@ -1207,7 +1206,7 @@ MODULE_PARM_DESC(11n_disable,
"disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)");
module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");

2
drivers/net/wireless/iwlwifi/iwl-modparams.h
View File

@ -91,7 +91,7 @@ enum iwl_power_level {
* @sw_crypto: using hardware encryption, default = 0
* @disable_11n: disable 11n capabilities, default = 0,
* use IWL_DISABLE_HT_* constants
* @amsdu_size_8K: enable 8K amsdu size, default = 1
* @amsdu_size_8K: enable 8K amsdu size, default = 0
* @restart_fw: restart firmware, default = 1
* @plcp_check: enable plcp health check, default = true
* @wd_disable: enable stuck queue check, default = 0

20
drivers/net/wireless/iwlwifi/iwl-trans.h
View File

@ -186,19 +186,13 @@ struct iwl_rx_packet {
* @CMD_ASYNC: Return right away and don't want for the response
* @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
* response. The caller needs to call iwl_free_resp when done.
* @CMD_WANT_HCMD: The caller needs to get the HCMD that was sent in the
* response handler. Chunks flagged by %IWL_HCMD_DFL_NOCOPY won't be
* copied. The pointer passed to the response handler is in the transport
* ownership and don't need to be freed by the op_mode. This also means
* that the pointer is invalidated after the op_mode's handler returns.
* @CMD_ON_DEMAND: This command is sent by the test mode pipe.
*/
enum CMD_MODE {
CMD_SYNC = 0,
CMD_ASYNC = BIT(0),
CMD_WANT_SKB = BIT(1),
CMD_WANT_HCMD = BIT(2),
CMD_ON_DEMAND = BIT(3),
CMD_ON_DEMAND = BIT(2),
};
#define DEF_CMD_PAYLOAD_SIZE 320
@ -217,7 +211,11 @@ struct iwl_device_cmd {
#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
#define IWL_MAX_CMD_TFDS 2
/*
* number of transfer buffers (fragments) per transmit frame descriptor;
* this is just the driver's idea, the hardware supports 20
*/
#define IWL_MAX_CMD_TBS_PER_TFD 2
/**
* struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
@ -254,15 +252,15 @@ enum iwl_hcmd_dataflag {
* @id: id of the host command
*/
struct iwl_host_cmd {
const void *data[IWL_MAX_CMD_TFDS];
const void *data[IWL_MAX_CMD_TBS_PER_TFD];
struct iwl_rx_packet *resp_pkt;
unsigned long _rx_page_addr;
u32 _rx_page_order;
int handler_status;
u32 flags;
u16 len[IWL_MAX_CMD_TFDS];
u8 dataflags[IWL_MAX_CMD_TFDS];
u16 len[IWL_MAX_CMD_TBS_PER_TFD];
u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
u8 id;
};

18
drivers/net/wireless/iwlwifi/mvm/fw-api.h
View File

@ -762,18 +762,20 @@ struct iwl_phy_context_cmd {
#define IWL_RX_INFO_PHY_CNT 8
#define IWL_RX_INFO_AGC_IDX 1
#define IWL_RX_INFO_RSSI_AB_IDX 2
#define IWL_RX_INFO_RSSI_C_IDX 3
#define IWL_OFDM_AGC_DB_MSK 0xfe00
#define IWL_OFDM_AGC_DB_POS 9
#define IWL_OFDM_AGC_A_MSK 0x0000007f
#define IWL_OFDM_AGC_A_POS 0
#define IWL_OFDM_AGC_B_MSK 0x00003f80
#define IWL_OFDM_AGC_B_POS 7
#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000
#define IWL_OFDM_AGC_CODE_POS 20
#define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff
#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWL_OFDM_RSSI_A_POS 0
#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWL_OFDM_RSSI_ALLBAND_A_POS 8
#define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000
#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWL_OFDM_RSSI_B_POS 16
#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff
#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00
#define IWL_OFDM_RSSI_C_POS 0
#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWL_OFDM_RSSI_ALLBAND_B_POS 24
/**
* struct iwl_rx_phy_info - phy info

133
drivers/net/wireless/iwlwifi/mvm/fw.c
View File

@ -79,17 +79,8 @@
#define UCODE_VALID_OK cpu_to_le32(0x1)
/* Default calibration values for WkP - set to INIT image w/o running */
static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f,
0x00, 0x18, 0x00 };
static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
0x7f, 0x7f, 0x7f };
static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00,
0x00 };
static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 };
static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 };
struct iwl_calib_default_data {
u16 size;
@ -99,12 +90,7 @@ struct iwl_calib_default_data {
#define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf}
static const struct iwl_calib_default_data wkp_calib_default_data[12] = {
[5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc),
[6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter),
[7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo),
[8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq),
[9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew),
[10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq),
[11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew),
};
@ -241,20 +227,6 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
return 0;
}
#define IWL_HW_REV_ID_RAINBOW 0x2
#define IWL_PROJ_TYPE_LHP 0x5
static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm)
{
struct iwl_nvm_data *data = mvm->nvm_data;
/* Temp calls to static definitions, will be changed to CSR calls */
u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW;
u8 project_type = IWL_PROJ_TYPE_LHP;
return data->radio_cfg_dash | (data->radio_cfg_step << 2) |
(hw_rev_id << 4) | ((project_type & 0x7f) << 6) |
(data->valid_tx_ant << 16) | (data->valid_rx_ant << 20);
}
static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
{
@ -262,7 +234,7 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
enum iwl_ucode_type ucode_type = mvm->cur_ucode;
/* Set parameters */
phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm));
phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config);
phy_cfg_cmd.calib_control.event_trigger =
mvm->fw->default_calib[ucode_type].event_trigger;
phy_cfg_cmd.calib_control.flow_trigger =
@ -275,103 +247,6 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
sizeof(phy_cfg_cmd), &phy_cfg_cmd);
}
/* Starting with the new PHY DB implementation - New calibs are enabled */
/* Value - 0x405e7 */
#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\
IWL_CALIB_CFG_TEMPERATURE_IDX |\
IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
IWL_CALIB_CFG_DC_IDX |\
IWL_CALIB_CFG_BB_FILTER_IDX |\
IWL_CALIB_CFG_LO_LEAKAGE_IDX |\
IWL_CALIB_CFG_TX_IQ_IDX |\
IWL_CALIB_CFG_RX_IQ_IDX |\
IWL_CALIB_CFG_AGC_IDX)
#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0
/* Value 0x41567 */
#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\
IWL_CALIB_CFG_TEMPERATURE_IDX |\
IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
IWL_CALIB_CFG_BB_FILTER_IDX |\
IWL_CALIB_CFG_DC_IDX |\
IWL_CALIB_CFG_TX_IQ_IDX |\
IWL_CALIB_CFG_RX_IQ_IDX |\
IWL_CALIB_CFG_SENSITIVITY_IDX |\
IWL_CALIB_CFG_AGC_IDX)
#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\
IWL_CALIB_CFG_TEMPERATURE_IDX |\
IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
IWL_CALIB_CFG_TX_PWR_IDX |\
IWL_CALIB_CFG_DC_IDX |\
IWL_CALIB_CFG_TX_IQ_IDX |\
IWL_CALIB_CFG_SENSITIVITY_IDX)
/*
* Sets the calibrations trigger values that will be sent to the FW for runtime
* and init calibrations.
* The ones given in the FW TLV are not correct.
*/
static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm)
{
struct iwl_tlv_calib_ctrl default_calib;
/*
* WkP FW TLV calib bits are wrong, overwrite them.
* This defines the dynamic calibrations which are implemented in the
* uCode both for init(flow) calculation and event driven calibs.
*/
/* Init Image */
default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT);
default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT);
if (default_calib.event_trigger !=
mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger)
IWL_ERR(mvm,
"Updating the event calib for INIT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger,
default_calib.event_trigger);
if (default_calib.flow_trigger !=
mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger)
IWL_ERR(mvm,
"Updating the flow calib for INIT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger,
default_calib.flow_trigger);
memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT],
&default_calib, sizeof(struct iwl_tlv_calib_ctrl));
IWL_ERR(mvm,
"Setting uCode init calibrations event 0x%x, trigger 0x%x\n",
default_calib.event_trigger,
default_calib.flow_trigger);
/* Run time image */
default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN);
default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN);
if (default_calib.event_trigger !=
mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger)
IWL_ERR(mvm,
"Updating the event calib for RT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger,
default_calib.event_trigger);
if (default_calib.flow_trigger !=
mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger)
IWL_ERR(mvm,
"Updating the flow calib for RT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger,
default_calib.flow_trigger);
memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR],
&default_calib, sizeof(struct iwl_tlv_calib_ctrl));
IWL_ERR(mvm,
"Setting uCode runtime calibs event 0x%x, trigger 0x%x\n",
default_calib.event_trigger,
default_calib.flow_trigger);
}
static int iwl_set_default_calibrations(struct iwl_mvm *mvm)
{
u8 cmd_raw[16]; /* holds the variable size commands */
@ -446,8 +321,10 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans);
WARN_ON(ret);
/* Override the calibrations from TLV and the const of fw */
iwl_set_default_calib_trigger(mvm);
/* Send TX valid antennas before triggering calibrations */
ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant);
if (ret)
goto error;
/* WkP doesn't have all calibrations, need to set default values */
if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) {

3
drivers/net/wireless/iwlwifi/mvm/mvm.h
View File

@ -80,7 +80,8 @@
#define IWL_INVALID_MAC80211_QUEUE 0xff
#define IWL_MVM_MAX_ADDRESSES 2
#define IWL_RSSI_OFFSET 44
/* RSSI offset for WkP */
#define IWL_RSSI_OFFSET 50
enum iwl_mvm_tx_fifo {
IWL_MVM_TX_FIFO_BK = 0,

18
drivers/net/wireless/iwlwifi/mvm/ops.c
View File

@ -624,12 +624,8 @@ static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
ieee80211_free_txskb(mvm->hw, skb);
}
static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
iwl_mvm_dump_nic_error_log(mvm);
iwl_abort_notification_waits(&mvm->notif_wait);
/*
@ -663,9 +659,21 @@ static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
}
}
static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
iwl_mvm_dump_nic_error_log(mvm);
iwl_mvm_nic_restart(mvm);
}
static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
WARN_ON(1);
iwl_mvm_nic_restart(mvm);
}
static const struct iwl_op_mode_ops iwl_mvm_ops = {

37
drivers/net/wireless/iwlwifi/mvm/rx.c
View File

@ -131,33 +131,42 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm,
static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm,
struct iwl_rx_phy_info *phy_info)
{
u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db;
int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm;
int rssi_all_band_a, rssi_all_band_b;
u32 agc_a, agc_b, max_agc;
u32 val;
/* Find max rssi among 3 possible receivers.
/* Find max rssi among 2 possible receivers.
* These values are measured by the Digital Signal Processor (DSP).
* They should stay fairly constant even as the signal strength varies,
* if the radio's Automatic Gain Control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info.
*/
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS;
agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS;
max_agc = max_t(u32, agc_a, agc_b);
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]);
rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS;
rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS;
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]);
rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS;
rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >>
IWL_OFDM_RSSI_ALLBAND_A_POS;
rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >>
IWL_OFDM_RSSI_ALLBAND_B_POS;
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS;
/*
* dBm = rssi dB - agc dB - constant.
* Higher AGC (higher radio gain) means lower signal.
*/
rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a;
rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b;
max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm);
max_rssi = max_t(u32, rssi_a, rssi_b);
max_rssi = max_t(u32, max_rssi, rssi_c);
IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n",
rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b);
IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
rssi_a, rssi_b, rssi_c, max_rssi, agc_db);
/* dBm = max_rssi dB - agc dB - constant.
* Higher AGC (higher radio gain) means lower signal. */
return max_rssi - agc_db - IWL_RSSI_OFFSET;
return max_rssi_dbm;
}
/*

10
drivers/net/wireless/iwlwifi/mvm/sta.c
View File

@ -770,6 +770,16 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
u16 txq_id;
int err;
/*
* If mac80211 is cleaning its state, then say that we finished since
* our state has been cleared anyway.
*/
if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
return 0;
}
spin_lock_bh(&mvmsta->lock);
txq_id = tid_data->txq_id;

6
drivers/net/wireless/iwlwifi/mvm/tx.c
View File

@ -607,12 +607,8 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
/* Single frame failure in an AMPDU queue => send BAR */
if (txq_id >= IWL_FIRST_AMPDU_QUEUE &&
!(info->flags & IEEE80211_TX_STAT_ACK)) {
/* there must be only one skb in the skb_list */
WARN_ON_ONCE(skb_freed > 1 ||
!skb_queue_empty(&skbs));
!(info->flags & IEEE80211_TX_STAT_ACK))
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
}
/* W/A FW bug: seq_ctl is wrong when the queue is flushed */
if (status == TX_STATUS_FAIL_FIFO_FLUSHED) {

34
drivers/net/wireless/iwlwifi/pcie/internal.h
View File

@ -137,10 +137,6 @@ static inline int iwl_queue_dec_wrap(int index, int n_bd)
struct iwl_cmd_meta {
/* only for SYNC commands, iff the reply skb is wanted */
struct iwl_host_cmd *source;
DEFINE_DMA_UNMAP_ADDR(mapping);
DEFINE_DMA_UNMAP_LEN(len);
u32 flags;
};
@ -185,25 +181,36 @@ struct iwl_queue {
/*
* The FH will write back to the first TB only, so we need
* to copy some data into the buffer regardless of whether
* it should be mapped or not. This indicates how much to
* copy, even for HCMDs it must be big enough to fit the
* DRAM scratch from the TX cmd, at least 16 bytes.
* it should be mapped or not. This indicates how big the
* first TB must be to include the scratch buffer. Since
* the scratch is 4 bytes at offset 12, it's 16 now. If we
* make it bigger then allocations will be bigger and copy
* slower, so that's probably not useful.
*/
#define IWL_HCMD_MIN_COPY_SIZE 16
#define IWL_HCMD_SCRATCHBUF_SIZE 16
struct iwl_pcie_txq_entry {
struct iwl_device_cmd *cmd;
struct iwl_device_cmd *copy_cmd;
struct sk_buff *skb;
/* buffer to free after command completes */
const void *free_buf;
struct iwl_cmd_meta meta;
};
struct iwl_pcie_txq_scratch_buf {
struct iwl_cmd_header hdr;
u8 buf[8];
__le32 scratch;
};
/**
* struct iwl_txq - Tx Queue for DMA
* @q: generic Rx/Tx queue descriptor
* @tfds: transmit frame descriptors (DMA memory)
* @scratchbufs: start of command headers, including scratch buffers, for
* the writeback -- this is DMA memory and an array holding one buffer
* for each command on the queue
* @scratchbufs_dma: DMA address for the scratchbufs start
* @entries: transmit entries (driver state)
* @lock: queue lock
* @stuck_timer: timer that fires if queue gets stuck
@ -217,6 +224,8 @@ struct iwl_pcie_txq_entry {
struct iwl_txq {
struct iwl_queue q;
struct iwl_tfd *tfds;
struct iwl_pcie_txq_scratch_buf *scratchbufs;
dma_addr_t scratchbufs_dma;
struct iwl_pcie_txq_entry *entries;
spinlock_t lock;
struct timer_list stuck_timer;
@ -225,6 +234,13 @@ struct iwl_txq {
u8 active;
};
static inline dma_addr_t
iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
{
return txq->scratchbufs_dma +
sizeof(struct iwl_pcie_txq_scratch_buf) * idx;
}
/**
* struct iwl_trans_pcie - PCIe transport specific data
* @rxq: all the RX queue data

14
drivers/net/wireless/iwlwifi/pcie/rx.c
View File

@ -637,22 +637,14 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
index = SEQ_TO_INDEX(sequence);
cmd_index = get_cmd_index(&txq->q, index);
if (reclaim) {
struct iwl_pcie_txq_entry *ent;
ent = &txq->entries[cmd_index];
cmd = ent->copy_cmd;
WARN_ON_ONCE(!cmd && ent->meta.flags & CMD_WANT_HCMD);
} else {
if (reclaim)
cmd = txq->entries[cmd_index].cmd;
else
cmd = NULL;
}
err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
if (reclaim) {
/* The original command isn't needed any more */
kfree(txq->entries[cmd_index].copy_cmd);
txq->entries[cmd_index].copy_cmd = NULL;
/* nor is the duplicated part of the command */
kfree(txq->entries[cmd_index].free_buf);
txq->entries[cmd_index].free_buf = NULL;
}

276
drivers/net/wireless/iwlwifi/pcie/tx.c
View File

@ -191,12 +191,9 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data)
}
for (i = q->read_ptr; i != q->write_ptr;
i = iwl_queue_inc_wrap(i, q->n_bd)) {
struct iwl_tx_cmd *tx_cmd =
(struct iwl_tx_cmd *)txq->entries[i].cmd->payload;
i = iwl_queue_inc_wrap(i, q->n_bd))
IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
get_unaligned_le32(&tx_cmd->scratch));
}
le32_to_cpu(txq->scratchbufs[i].scratch));
iwl_op_mode_nic_error(trans->op_mode);
}
@ -367,8 +364,8 @@ static inline u8 iwl_pcie_tfd_get_num_tbs(struct iwl_tfd *tfd)
}
static void iwl_pcie_tfd_unmap(struct iwl_trans *trans,
struct iwl_cmd_meta *meta, struct iwl_tfd *tfd,
enum dma_data_direction dma_dir)
struct iwl_cmd_meta *meta,
struct iwl_tfd *tfd)
{
int i;
int num_tbs;
@ -382,17 +379,12 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans,
return;
}
/* Unmap tx_cmd */
if (num_tbs)
dma_unmap_single(trans->dev,
dma_unmap_addr(meta, mapping),
dma_unmap_len(meta, len),
DMA_BIDIRECTIONAL);
/* first TB is never freed - it's the scratchbuf data */
/* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++)
dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i),
iwl_pcie_tfd_tb_get_len(tfd, i), dma_dir);
iwl_pcie_tfd_tb_get_len(tfd, i),
DMA_TO_DEVICE);
tfd->num_tbs = 0;
}
@ -406,8 +398,7 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans,
* Does NOT advance any TFD circular buffer read/write indexes
* Does NOT free the TFD itself (which is within circular buffer)
*/
static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq,
enum dma_data_direction dma_dir)
static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq)
{
struct iwl_tfd *tfd_tmp = txq->tfds;
@ -418,8 +409,7 @@ static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq,
lockdep_assert_held(&txq->lock);
/* We have only q->n_window txq->entries, but we use q->n_bd tfds */
iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr],
dma_dir);
iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr]);
/* free SKB */
if (txq->entries) {
@ -479,6 +469,7 @@ static int iwl_pcie_txq_alloc(struct iwl_trans *trans,
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
size_t tfd_sz = sizeof(struct iwl_tfd) * TFD_QUEUE_SIZE_MAX;
size_t scratchbuf_sz;
int i;
if (WARN_ON(txq->entries || txq->tfds))
@ -514,9 +505,25 @@ static int iwl_pcie_txq_alloc(struct iwl_trans *trans,
IWL_ERR(trans, "dma_alloc_coherent(%zd) failed\n", tfd_sz);
goto error;
}
BUILD_BUG_ON(IWL_HCMD_SCRATCHBUF_SIZE != sizeof(*txq->scratchbufs));
BUILD_BUG_ON(offsetof(struct iwl_pcie_txq_scratch_buf, scratch) !=
sizeof(struct iwl_cmd_header) +
offsetof(struct iwl_tx_cmd, scratch));
scratchbuf_sz = sizeof(*txq->scratchbufs) * slots_num;
txq->scratchbufs = dma_alloc_coherent(trans->dev, scratchbuf_sz,
&txq->scratchbufs_dma,
GFP_KERNEL);
if (!txq->scratchbufs)
goto err_free_tfds;
txq->q.id = txq_id;
return 0;
err_free_tfds:
dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->q.dma_addr);
error:
if (txq->entries && txq_id == trans_pcie->cmd_queue)
for (i = 0; i < slots_num; i++)
@ -565,22 +572,13 @@ static void iwl_pcie_txq_unmap(struct iwl_trans *trans, int txq_id)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_txq *txq = &trans_pcie->txq[txq_id];
struct iwl_queue *q = &txq->q;
enum dma_data_direction dma_dir;
if (!q->n_bd)
return;
/* In the command queue, all the TBs are mapped as BIDI
* so unmap them as such.
*/
if (txq_id == trans_pcie->cmd_queue)
dma_dir = DMA_BIDIRECTIONAL;
else
dma_dir = DMA_TO_DEVICE;
spin_lock_bh(&txq->lock);
while (q->write_ptr != q->read_ptr) {
iwl_pcie_txq_free_tfd(trans, txq, dma_dir);
iwl_pcie_txq_free_tfd(trans, txq);
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
}
spin_unlock_bh(&txq->lock);
@ -610,7 +608,6 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id)
if (txq_id == trans_pcie->cmd_queue)
for (i = 0; i < txq->q.n_window; i++) {
kfree(txq->entries[i].cmd);
kfree(txq->entries[i].copy_cmd);
kfree(txq->entries[i].free_buf);
}
@ -619,6 +616,10 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id)
dma_free_coherent(dev, sizeof(struct iwl_tfd) *
txq->q.n_bd, txq->tfds, txq->q.dma_addr);
txq->q.dma_addr = 0;
dma_free_coherent(dev,
sizeof(*txq->scratchbufs) * txq->q.n_window,
txq->scratchbufs, txq->scratchbufs_dma);
}
kfree(txq->entries);
@ -962,7 +963,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn,
iwl_pcie_txq_inval_byte_cnt_tbl(trans, txq);
iwl_pcie_txq_free_tfd(trans, txq, DMA_TO_DEVICE);
iwl_pcie_txq_free_tfd(trans, txq);
}
iwl_pcie_txq_progress(trans_pcie, txq);
@ -1152,29 +1153,29 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
void *dup_buf = NULL;
dma_addr_t phys_addr;
int idx;
u16 copy_size, cmd_size, dma_size;
u16 copy_size, cmd_size, scratch_size;
bool had_nocopy = false;
int i;
u32 cmd_pos;
const u8 *cmddata[IWL_MAX_CMD_TFDS];
u16 cmdlen[IWL_MAX_CMD_TFDS];
const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD];
u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD];
copy_size = sizeof(out_cmd->hdr);
cmd_size = sizeof(out_cmd->hdr);
/* need one for the header if the first is NOCOPY */
BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1);
BUILD_BUG_ON(IWL_MAX_CMD_TBS_PER_TFD > IWL_NUM_OF_TBS - 1);
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
cmddata[i] = cmd->data[i];
cmdlen[i] = cmd->len[i];
if (!cmd->len[i])
continue;
/* need at least IWL_HCMD_MIN_COPY_SIZE copied */
if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
int copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
/* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) {
int copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size;
if (copy > cmdlen[i])
copy = cmdlen[i];
@ -1260,15 +1261,15 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
/* and copy the data that needs to be copied */
cmd_pos = offsetof(struct iwl_device_cmd, payload);
copy_size = sizeof(out_cmd->hdr);
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
int copy = 0;
if (!cmd->len)
continue;
/* need at least IWL_HCMD_MIN_COPY_SIZE copied */
if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
/* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) {
copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size;
if (copy > cmd->len[i])
copy = cmd->len[i];
@ -1286,50 +1287,38 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
}
}
WARN_ON_ONCE(txq->entries[idx].copy_cmd);
/*
* since out_cmd will be the source address of the FH, it will write
* the retry count there. So when the user needs to receivce the HCMD
* that corresponds to the response in the response handler, it needs
* to set CMD_WANT_HCMD.
*/
if (cmd->flags & CMD_WANT_HCMD) {
txq->entries[idx].copy_cmd =
kmemdup(out_cmd, cmd_pos, GFP_ATOMIC);
if (unlikely(!txq->entries[idx].copy_cmd)) {
idx = -ENOMEM;
goto out;
}
}
IWL_DEBUG_HC(trans,
"Sending command %s (#%x), seq: 0x%04X, %d bytes at %d[%d]:%d\n",
get_cmd_string(trans_pcie, out_cmd->hdr.cmd),
out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
cmd_size, q->write_ptr, idx, trans_pcie->cmd_queue);
/*
* If the entire command is smaller than IWL_HCMD_MIN_COPY_SIZE, we must
* still map at least that many bytes for the hardware to write back to.
* We have enough space, so that's not a problem.
*/
dma_size = max_t(u16, copy_size, IWL_HCMD_MIN_COPY_SIZE);
/* start the TFD with the scratchbuf */
scratch_size = min_t(int, copy_size, IWL_HCMD_SCRATCHBUF_SIZE);
memcpy(&txq->scratchbufs[q->write_ptr], &out_cmd->hdr, scratch_size);
iwl_pcie_txq_build_tfd(trans, txq,
iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr),
scratch_size, 1);
phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, dma_size,
DMA_BIDIRECTIONAL);
if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
idx = -ENOMEM;
goto out;
/* map first command fragment, if any remains */
if (copy_size > scratch_size) {
phys_addr = dma_map_single(trans->dev,
((u8 *)&out_cmd->hdr) + scratch_size,
copy_size - scratch_size,
DMA_TO_DEVICE);
if (dma_mapping_error(trans->dev, phys_addr)) {
iwl_pcie_tfd_unmap(trans, out_meta,
&txq->tfds[q->write_ptr]);
idx = -ENOMEM;
goto out;
}
iwl_pcie_txq_build_tfd(trans, txq, phys_addr,
copy_size - scratch_size, 0);
}
dma_unmap_addr_set(out_meta, mapping, phys_addr);
dma_unmap_len_set(out_meta, len, dma_size);
iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1);
/* map the remaining (adjusted) nocopy/dup fragments */
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
const void *data = cmddata[i];
if (!cmdlen[i])
@ -1340,11 +1329,10 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
if (cmd->dataflags[i] & IWL_HCMD_DFL_DUP)
data = dup_buf;
phys_addr = dma_map_single(trans->dev, (void *)data,
cmdlen[i], DMA_BIDIRECTIONAL);
cmdlen[i], DMA_TO_DEVICE);
if (dma_mapping_error(trans->dev, phys_addr)) {
iwl_pcie_tfd_unmap(trans, out_meta,
&txq->tfds[q->write_ptr],
DMA_BIDIRECTIONAL);
&txq->tfds[q->write_ptr]);
idx = -ENOMEM;
goto out;
}
@ -1418,7 +1406,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans,
cmd = txq->entries[cmd_index].cmd;
meta = &txq->entries[cmd_index].meta;
iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index], DMA_BIDIRECTIONAL);
iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index]);
/* Input error checking is done when commands are added to queue. */
if (meta->flags & CMD_WANT_SKB) {
@ -1597,10 +1585,9 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
struct iwl_cmd_meta *out_meta;
struct iwl_txq *txq;
struct iwl_queue *q;
dma_addr_t phys_addr = 0;
dma_addr_t txcmd_phys;
dma_addr_t scratch_phys;
u16 len, firstlen, secondlen;
dma_addr_t tb0_phys, tb1_phys, scratch_phys;
void *tb1_addr;
u16 len, tb1_len, tb2_len;
u8 wait_write_ptr = 0;
__le16 fc = hdr->frame_control;
u8 hdr_len = ieee80211_hdrlen(fc);
@ -1638,35 +1625,73 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
INDEX_TO_SEQ(q->write_ptr)));
tb0_phys = iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr);
scratch_phys = tb0_phys + sizeof(struct iwl_cmd_header) +
offsetof(struct iwl_tx_cmd, scratch);
tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
/* Set up first empty entry in queue's array of Tx/cmd buffers */
out_meta = &txq->entries[q->write_ptr].meta;
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
* (payload data will be in another buffer).
* Size of this varies, due to varying MAC header length.
* If end is not dword aligned, we'll have 2 extra bytes at the end
* of the MAC header (device reads on dword boundaries).
* We'll tell device about this padding later.
* The second TB (tb1) points to the remainder of the TX command
* and the 802.11 header - dword aligned size
* (This calculation modifies the TX command, so do it before the
* setup of the first TB)
*/
len = sizeof(struct iwl_tx_cmd) +
sizeof(struct iwl_cmd_header) + hdr_len;
firstlen = (len + 3) & ~3;
len = sizeof(struct iwl_tx_cmd) + sizeof(struct iwl_cmd_header) +
hdr_len - IWL_HCMD_SCRATCHBUF_SIZE;
tb1_len = (len + 3) & ~3;
/* Tell NIC about any 2-byte padding after MAC header */
if (firstlen != len)
if (tb1_len != len)
tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys = dma_map_single(trans->dev,
&dev_cmd->hdr, firstlen,
DMA_BIDIRECTIONAL);
if (unlikely(dma_mapping_error(trans->dev, txcmd_phys)))
/* The first TB points to the scratchbuf data - min_copy bytes */
memcpy(&txq->scratchbufs[q->write_ptr], &dev_cmd->hdr,
IWL_HCMD_SCRATCHBUF_SIZE);
iwl_pcie_txq_build_tfd(trans, txq, tb0_phys,
IWL_HCMD_SCRATCHBUF_SIZE, 1);
/* there must be data left over for TB1 or this code must be changed */
BUILD_BUG_ON(sizeof(struct iwl_tx_cmd) < IWL_HCMD_SCRATCHBUF_SIZE);
/* map the data for TB1 */
tb1_addr = ((u8 *)&dev_cmd->hdr) + IWL_HCMD_SCRATCHBUF_SIZE;
tb1_phys = dma_map_single(trans->dev, tb1_addr, tb1_len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(trans->dev, tb1_phys)))
goto out_err;
dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
dma_unmap_len_set(out_meta, len, firstlen);
iwl_pcie_txq_build_tfd(trans, txq, tb1_phys, tb1_len, 0);
/*
* Set up TFD's third entry to point directly to remainder
* of skb, if any (802.11 null frames have no payload).
*/
tb2_len = skb->len - hdr_len;
if (tb2_len > 0) {
dma_addr_t tb2_phys = dma_map_single(trans->dev,
skb->data + hdr_len,
tb2_len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(trans->dev, tb2_phys))) {
iwl_pcie_tfd_unmap(trans, out_meta,
&txq->tfds[q->write_ptr]);
goto out_err;
}
iwl_pcie_txq_build_tfd(trans, txq, tb2_phys, tb2_len, 0);
}
/* Set up entry for this TFD in Tx byte-count array */
iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len));
trace_iwlwifi_dev_tx(trans->dev, skb,
&txq->tfds[txq->q.write_ptr],
sizeof(struct iwl_tfd),
&dev_cmd->hdr, IWL_HCMD_SCRATCHBUF_SIZE + tb1_len,
skb->data + hdr_len, tb2_len);
trace_iwlwifi_dev_tx_data(trans->dev, skb,
skb->data + hdr_len, tb2_len);
if (!ieee80211_has_morefrags(fc)) {
txq->need_update = 1;
@ -1675,49 +1700,6 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
txq->need_update = 0;
}
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
secondlen = skb->len - hdr_len;
if (secondlen > 0) {
phys_addr = dma_map_single(trans->dev, skb->data + hdr_len,
secondlen, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
dma_unmap_single(trans->dev,
dma_unmap_addr(out_meta, mapping),
dma_unmap_len(out_meta, len),
DMA_BIDIRECTIONAL);
goto out_err;
}
}
/* Attach buffers to TFD */
iwl_pcie_txq_build_tfd(trans, txq, txcmd_phys, firstlen, 1);
if (secondlen > 0)
iwl_pcie_txq_build_tfd(trans, txq, phys_addr, secondlen, 0);
scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
offsetof(struct iwl_tx_cmd, scratch);
/* take back ownership of DMA buffer to enable update */
dma_sync_single_for_cpu(trans->dev, txcmd_phys, firstlen,
DMA_BIDIRECTIONAL);
tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
/* Set up entry for this TFD in Tx byte-count array */
iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len));
dma_sync_single_for_device(trans->dev, txcmd_phys, firstlen,
DMA_BIDIRECTIONAL);
trace_iwlwifi_dev_tx(trans->dev, skb,
&txq->tfds[txq->q.write_ptr],
sizeof(struct iwl_tfd),
&dev_cmd->hdr, firstlen,
skb->data + hdr_len, secondlen);
trace_iwlwifi_dev_tx_data(trans->dev, skb,
skb->data + hdr_len, secondlen);
/* start timer if queue currently empty */
if (txq->need_update && q->read_ptr == q->write_ptr &&
trans_pcie->wd_timeout)

9
fs/hostfs/hostfs_kern.c
View File

@ -845,15 +845,8 @@ int hostfs_setattr(struct dentry *dentry, struct iattr *attr)
return err;
if ((attr->ia_valid & ATTR_SIZE) &&
attr->ia_size != i_size_read(inode)) {
int error;
error = inode_newsize_ok(inode, attr->ia_size);
if (error)
return error;
attr->ia_size != i_size_read(inode))
truncate_setsize(inode, attr->ia_size);
}
setattr_copy(inode, attr);
mark_inode_dirty(inode);

1
include/linux/clocksource.h
View File

@ -206,6 +206,7 @@ struct clocksource {
#define CLOCK_SOURCE_WATCHDOG 0x10
#define CLOCK_SOURCE_VALID_FOR_HRES 0x20
#define CLOCK_SOURCE_UNSTABLE 0x40
#define CLOCK_SOURCE_SUSPEND_NONSTOP 0x80
/* simplify initialization of mask field */
#define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)

5
include/linux/hrtimer.h
View File

@ -157,6 +157,7 @@ enum hrtimer_base_type {
HRTIMER_BASE_MONOTONIC,
HRTIMER_BASE_REALTIME,
HRTIMER_BASE_BOOTTIME,
HRTIMER_BASE_TAI,
HRTIMER_MAX_CLOCK_BASES,
};
@ -327,7 +328,9 @@ extern ktime_t ktime_get(void);
extern ktime_t ktime_get_real(void);
extern ktime_t ktime_get_boottime(void);
extern ktime_t ktime_get_monotonic_offset(void);
extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot);
extern ktime_t ktime_get_clocktai(void);
extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot,
ktime_t *offs_tai);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);

1
include/linux/jiffies.h
View File

@ -75,7 +75,6 @@ extern int register_refined_jiffies(long clock_tick_rate);
*/
extern u64 __jiffy_data jiffies_64;
extern unsigned long volatile __jiffy_data jiffies;
extern seqlock_t jiffies_lock;
#if (BITS_PER_LONG < 64)
u64 get_jiffies_64(void);

3
include/linux/time.h
View File

@ -181,6 +181,9 @@ extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
extern int timekeeping_valid_for_hres(void);
extern u64 timekeeping_max_deferment(void);
extern int timekeeping_inject_offset(struct timespec *ts);
extern s32 timekeeping_get_tai_offset(void);
extern void timekeeping_set_tai_offset(s32 tai_offset);
extern void timekeeping_clocktai(struct timespec *ts);
struct tms;
extern void do_sys_times(struct tms *);

7
include/linux/timekeeper_internal.h
View File

@ -62,8 +62,11 @@ struct timekeeper {
ktime_t offs_boot;
/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
struct timespec raw_time;
/* Seqlock for all timekeeper values */
seqlock_t lock;
/* The current UTC to TAI offset in seconds */
s32 tai_offset;
/* Offset clock monotonic -> clock tai */
ktime_t offs_tai;
};
static inline struct timespec tk_xtime(struct timekeeper *tk)

6
include/uapi/linux/time.h
View File

@ -54,11 +54,9 @@ struct itimerval {
#define CLOCK_BOOTTIME 7
#define CLOCK_REALTIME_ALARM 8
#define CLOCK_BOOTTIME_ALARM 9
#define CLOCK_SGI_CYCLE 10 /* Hardware specific */
#define CLOCK_TAI 11
/*
* The IDs of various hardware clocks:
*/
#define CLOCK_SGI_CYCLE 10
#define MAX_CLOCKS 16
#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC)
#define CLOCKS_MONO CLOCK_MONOTONIC

14
kernel/hrtimer.c
View File

@ -83,6 +83,12 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
.get_time = &ktime_get_boottime,
.resolution = KTIME_LOW_RES,
},
{
.index = HRTIMER_BASE_TAI,
.clockid = CLOCK_TAI,
.get_time = &ktime_get_clocktai,
.resolution = KTIME_LOW_RES,
},
}
};
@ -90,6 +96,7 @@ static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
[CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
[CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
[CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
[CLOCK_TAI] = HRTIMER_BASE_TAI,
};
static inline int hrtimer_clockid_to_base(clockid_t clock_id)
@ -106,8 +113,10 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
{
ktime_t xtim, mono, boot;
struct timespec xts, tom, slp;
s32 tai_offset;
get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
tai_offset = timekeeping_get_tai_offset();
xtim = timespec_to_ktime(xts);
mono = ktime_add(xtim, timespec_to_ktime(tom));
@ -115,6 +124,8 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
base->clock_base[HRTIMER_BASE_TAI].softirq_time =
ktime_add(xtim, ktime_set(tai_offset, 0));
}
/*
@ -651,8 +662,9 @@ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
{
ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
return ktime_get_update_offsets(offs_real, offs_boot);
return ktime_get_update_offsets(offs_real, offs_boot, offs_tai);
}
/*

16
kernel/posix-timers.c
View File

@ -221,6 +221,11 @@ static int posix_get_boottime(const clockid_t which_clock, struct timespec *tp)
return 0;
}
static int posix_get_tai(clockid_t which_clock, struct timespec *tp)
{
timekeeping_clocktai(tp);
return 0;
}
/*
* Initialize everything, well, just everything in Posix clocks/timers ;)
@ -261,6 +266,16 @@ static __init int init_posix_timers(void)
.clock_getres = posix_get_coarse_res,
.clock_get = posix_get_monotonic_coarse,
};
struct k_clock clock_tai = {
.clock_getres = hrtimer_get_res,
.clock_get = posix_get_tai,
.nsleep = common_nsleep,
.nsleep_restart = hrtimer_nanosleep_restart,
.timer_create = common_timer_create,
.timer_set = common_timer_set,
.timer_get = common_timer_get,
.timer_del = common_timer_del,
};
struct k_clock clock_boottime = {
.clock_getres = hrtimer_get_res,
.clock_get = posix_get_boottime,
@ -278,6 +293,7 @@ static __init int init_posix_timers(void)
posix_timers_register_clock(CLOCK_REALTIME_COARSE, &clock_realtime_coarse);
posix_timers_register_clock(CLOCK_MONOTONIC_COARSE, &clock_monotonic_coarse);
posix_timers_register_clock(CLOCK_BOOTTIME, &clock_boottime);
posix_timers_register_clock(CLOCK_TAI, &clock_tai);
posix_timers_cache = kmem_cache_create("posix_timers_cache",
sizeof (struct k_itimer), 0, SLAB_PANIC,

11
kernel/time.c
View File

@ -138,13 +138,14 @@ int persistent_clock_is_local;
*/
static inline void warp_clock(void)
{
struct timespec adjust;
if (sys_tz.tz_minuteswest != 0) {
struct timespec adjust;
adjust = current_kernel_time();
if (sys_tz.tz_minuteswest != 0)
persistent_clock_is_local = 1;
adjust.tv_sec += sys_tz.tz_minuteswest * 60;
do_settimeofday(&adjust);
adjust.tv_sec = sys_tz.tz_minuteswest * 60;
adjust.tv_nsec = 0;
timekeeping_inject_offset(&adjust);
}
}
/*

18
kernel/time/ntp.c
View File

@ -53,9 +53,6 @@ static int time_state = TIME_OK;
/* clock status bits: */
static int time_status = STA_UNSYNC;
/* TAI offset (secs): */
static long time_tai;
/* time adjustment (nsecs): */
static s64 time_offset;
@ -415,7 +412,6 @@ int second_overflow(unsigned long secs)
else if (secs % 86400 == 0) {
leap = -1;
time_state = TIME_OOP;
time_tai++;
printk(KERN_NOTICE
"Clock: inserting leap second 23:59:60 UTC\n");
}
@ -425,7 +421,6 @@ int second_overflow(unsigned long secs)
time_state = TIME_OK;
else if ((secs + 1) % 86400 == 0) {
leap = 1;
time_tai--;
time_state = TIME_WAIT;
printk(KERN_NOTICE
"Clock: deleting leap second 23:59:59 UTC\n");
@ -579,7 +574,9 @@ static inline void process_adj_status(struct timex *txc, struct timespec *ts)
* Called with ntp_lock held, so we can access and modify
* all the global NTP state:
*/
static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts)
static inline void process_adjtimex_modes(struct timex *txc,
struct timespec *ts,
s32 *time_tai)
{
if (txc->modes & ADJ_STATUS)
process_adj_status(txc, ts);
@ -613,7 +610,7 @@ static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts
}
if (txc->modes & ADJ_TAI && txc->constant > 0)
time_tai = txc->constant;
*time_tai = txc->constant;
if (txc->modes & ADJ_OFFSET)
ntp_update_offset(txc->offset);
@ -632,6 +629,7 @@ static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts
int do_adjtimex(struct timex *txc)
{
struct timespec ts;
u32 time_tai, orig_tai;
int result;
/* Validate the data before disabling interrupts */
@ -671,6 +669,7 @@ int do_adjtimex(struct timex *txc)
}
getnstimeofday(&ts);
orig_tai = time_tai = timekeeping_get_tai_offset();
raw_spin_lock_irq(&ntp_lock);
@ -687,7 +686,7 @@ int do_adjtimex(struct timex *txc)
/* If there are input parameters, then process them: */
if (txc->modes)
process_adjtimex_modes(txc, &ts);
process_adjtimex_modes(txc, &ts, &time_tai);
txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
NTP_SCALE_SHIFT);
@ -716,6 +715,9 @@ int do_adjtimex(struct timex *txc)
raw_spin_unlock_irq(&ntp_lock);
if (time_tai != orig_tai)
timekeeping_set_tai_offset(time_tai);
txc->time.tv_sec = ts.tv_sec;
txc->time.tv_usec = ts.tv_nsec;
if (!(time_status & STA_NANO))

Some files were not shown because too many files have changed in this diff Show More