mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
mfd: ioc3: Add driver for SGI IOC3 chip
SGI IOC3 chip has integrated ethernet, keyboard and mouse interface. It also supports connecting a SuperIO chip for serial and parallel interfaces. IOC3 is used inside various SGI systemboards and add-on cards with different equipped external interfaces. Support for ethernet and serial interfaces were implemented inside the network driver. This patchset moves out the not network related parts to a new MFD driver, which takes care of card detection, setup of platform devices and interrupt distribution for the subdevices. Serial portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Network part: Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Network part: Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: James Hogan <jhogan@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-serial@vger.kernel.org
This commit is contained in:
parent
10cf8300ec
commit
0ce5ebd24d
arch/mips/sgi-ip27
drivers
@ -168,23 +168,3 @@ void hub_rtc_init(nasid_t nasid)
|
|||||||
LOCAL_HUB_S(PI_RT_PEND_B, 0);
|
LOCAL_HUB_S(PI_RT_PEND_B, 0);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
static int __init sgi_ip27_rtc_devinit(void)
|
|
||||||
{
|
|
||||||
struct resource res;
|
|
||||||
|
|
||||||
memset(&res, 0, sizeof(res));
|
|
||||||
res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
|
|
||||||
IOC3_BYTEBUS_DEV0);
|
|
||||||
res.end = res.start + 32767;
|
|
||||||
res.flags = IORESOURCE_MEM;
|
|
||||||
|
|
||||||
return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
|
|
||||||
&res, 1));
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* kludge make this a device_initcall after ioc3 resource conflicts
|
|
||||||
* are resolved
|
|
||||||
*/
|
|
||||||
late_initcall(sgi_ip27_rtc_devinit);
|
|
||||||
|
@ -2004,5 +2004,18 @@ config RAVE_SP_CORE
|
|||||||
Select this to get support for the Supervisory Processor
|
Select this to get support for the Supervisory Processor
|
||||||
device found on several devices in RAVE line of hardware.
|
device found on several devices in RAVE line of hardware.
|
||||||
|
|
||||||
|
config SGI_MFD_IOC3
|
||||||
|
tristate "SGI IOC3 core driver"
|
||||||
|
depends on PCI && MIPS && 64BIT
|
||||||
|
select MFD_CORE
|
||||||
|
help
|
||||||
|
This option enables basic support for the SGI IOC3-based
|
||||||
|
controller cards. This option does not enable any specific
|
||||||
|
functions on such a card, but provides necessary infrastructure
|
||||||
|
for other drivers to utilize.
|
||||||
|
|
||||||
|
If you have an SGI Origin, Octane, or a PCI IOC3 card,
|
||||||
|
then say Y. Otherwise say N.
|
||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
endif
|
endif
|
||||||
|
@ -255,3 +255,4 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
|
|||||||
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
|
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
|
||||||
obj-$(CONFIG_MFD_STMFX) += stmfx.o
|
obj-$(CONFIG_MFD_STMFX) += stmfx.o
|
||||||
|
|
||||||
|
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
|
||||||
|
669
drivers/mfd/ioc3.c
Normal file
669
drivers/mfd/ioc3.c
Normal file
@ -0,0 +1,669 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0
|
||||||
|
/*
|
||||||
|
* SGI IOC3 multifunction device driver
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
|
||||||
|
*
|
||||||
|
* Based on work by:
|
||||||
|
* Stanislaw Skowronek <skylark@unaligned.org>
|
||||||
|
* Joshua Kinard <kumba@gentoo.org>
|
||||||
|
* Brent Casavant <bcasavan@sgi.com> - IOC4 master driver
|
||||||
|
* Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/errno.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/mfd/core.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/pci.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/platform_data/sgi-w1.h>
|
||||||
|
#include <linux/rtc/ds1685.h>
|
||||||
|
|
||||||
|
#include <asm/pci/bridge.h>
|
||||||
|
#include <asm/sn/ioc3.h>
|
||||||
|
|
||||||
|
#define IOC3_IRQ_SERIAL_A 6
|
||||||
|
#define IOC3_IRQ_SERIAL_B 15
|
||||||
|
#define IOC3_IRQ_KBD 22
|
||||||
|
|
||||||
|
/* Bitmask for selecting which IRQs are level triggered */
|
||||||
|
#define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B))
|
||||||
|
|
||||||
|
#define M48T35_REG_SIZE 32768 /* size of m48t35 registers */
|
||||||
|
|
||||||
|
/* 1.2 us latency timer (40 cycles at 33 MHz) */
|
||||||
|
#define IOC3_LATENCY 40
|
||||||
|
|
||||||
|
struct ioc3_priv_data {
|
||||||
|
struct irq_domain *domain;
|
||||||
|
struct ioc3 __iomem *regs;
|
||||||
|
struct pci_dev *pdev;
|
||||||
|
int domain_irq;
|
||||||
|
};
|
||||||
|
|
||||||
|
static void ioc3_irq_ack(struct irq_data *d)
|
||||||
|
{
|
||||||
|
struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
|
||||||
|
unsigned int hwirq = irqd_to_hwirq(d);
|
||||||
|
|
||||||
|
writel(BIT(hwirq), &ipd->regs->sio_ir);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ioc3_irq_mask(struct irq_data *d)
|
||||||
|
{
|
||||||
|
struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
|
||||||
|
unsigned int hwirq = irqd_to_hwirq(d);
|
||||||
|
|
||||||
|
writel(BIT(hwirq), &ipd->regs->sio_iec);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ioc3_irq_unmask(struct irq_data *d)
|
||||||
|
{
|
||||||
|
struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
|
||||||
|
unsigned int hwirq = irqd_to_hwirq(d);
|
||||||
|
|
||||||
|
writel(BIT(hwirq), &ipd->regs->sio_ies);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct irq_chip ioc3_irq_chip = {
|
||||||
|
.name = "IOC3",
|
||||||
|
.irq_ack = ioc3_irq_ack,
|
||||||
|
.irq_mask = ioc3_irq_mask,
|
||||||
|
.irq_unmask = ioc3_irq_unmask,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
||||||
|
irq_hw_number_t hwirq)
|
||||||
|
{
|
||||||
|
/* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */
|
||||||
|
if (BIT(hwirq) & IOC3_LVL_MASK)
|
||||||
|
irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq);
|
||||||
|
else
|
||||||
|
irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq);
|
||||||
|
|
||||||
|
irq_set_chip_data(irq, d->host_data);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ioc3_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
|
||||||
|
{
|
||||||
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
||||||
|
irq_set_chip_data(irq, NULL);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct irq_domain_ops ioc3_irq_domain_ops = {
|
||||||
|
.map = ioc3_irq_domain_map,
|
||||||
|
.unmap = ioc3_irq_domain_unmap,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void ioc3_irq_handler(struct irq_desc *desc)
|
||||||
|
{
|
||||||
|
struct irq_domain *domain = irq_desc_get_handler_data(desc);
|
||||||
|
struct ioc3_priv_data *ipd = domain->host_data;
|
||||||
|
struct ioc3 __iomem *regs = ipd->regs;
|
||||||
|
u32 pending, mask;
|
||||||
|
unsigned int irq;
|
||||||
|
|
||||||
|
pending = readl(®s->sio_ir);
|
||||||
|
mask = readl(®s->sio_ies);
|
||||||
|
pending &= mask; /* Mask off not enabled interrupts */
|
||||||
|
|
||||||
|
if (pending) {
|
||||||
|
irq = irq_find_mapping(domain, __ffs(pending));
|
||||||
|
if (irq)
|
||||||
|
generic_handle_irq(irq);
|
||||||
|
} else {
|
||||||
|
spurious_interrupt();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* System boards/BaseIOs use more interrupt pins of the bridge ASIC
|
||||||
|
* to which the IOC3 is connected. Since the IOC3 MFD driver
|
||||||
|
* knows wiring of these extra pins, we use the map_irq function
|
||||||
|
* to get interrupts activated
|
||||||
|
*/
|
||||||
|
static int ioc3_map_irq(struct pci_dev *pdev, int slot, int pin)
|
||||||
|
{
|
||||||
|
struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus);
|
||||||
|
|
||||||
|
return hbrg->map_irq(pdev, slot, pin);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq)
|
||||||
|
{
|
||||||
|
struct irq_domain *domain;
|
||||||
|
struct fwnode_handle *fn;
|
||||||
|
|
||||||
|
fn = irq_domain_alloc_named_fwnode("IOC3");
|
||||||
|
if (!fn)
|
||||||
|
goto err;
|
||||||
|
|
||||||
|
domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd);
|
||||||
|
if (!domain)
|
||||||
|
goto err;
|
||||||
|
|
||||||
|
irq_domain_free_fwnode(fn);
|
||||||
|
ipd->domain = domain;
|
||||||
|
|
||||||
|
irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain);
|
||||||
|
ipd->domain_irq = irq;
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
err:
|
||||||
|
dev_err(&ipd->pdev->dev, "irq domain setup failed\n");
|
||||||
|
return -ENOMEM;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct resource ioc3_uarta_resources[] = {
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta),
|
||||||
|
sizeof_field(struct ioc3, sregs.uarta)),
|
||||||
|
DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct resource ioc3_uartb_resources[] = {
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb),
|
||||||
|
sizeof_field(struct ioc3, sregs.uartb)),
|
||||||
|
DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mfd_cell ioc3_serial_cells[] = {
|
||||||
|
{
|
||||||
|
.name = "ioc3-serial8250",
|
||||||
|
.resources = ioc3_uarta_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_uarta_resources),
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.name = "ioc3-serial8250",
|
||||||
|
.resources = ioc3_uartb_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_uartb_resources),
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Set gpio pins for RS232/RS422 mode selection */
|
||||||
|
writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL,
|
||||||
|
&ipd->regs->gpcr_s);
|
||||||
|
/* Select RS232 mode for uart a */
|
||||||
|
writel(0, &ipd->regs->gppr[6]);
|
||||||
|
/* Select RS232 mode for uart b */
|
||||||
|
writel(0, &ipd->regs->gppr[7]);
|
||||||
|
|
||||||
|
/* Switch both ports to 16650 mode */
|
||||||
|
writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN,
|
||||||
|
&ipd->regs->port_a.sscr);
|
||||||
|
writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN,
|
||||||
|
&ipd->regs->port_b.sscr);
|
||||||
|
udelay(1000); /* Wait until mode switch is done */
|
||||||
|
|
||||||
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
||||||
|
ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells),
|
||||||
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct resource ioc3_kbd_resources[] = {
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, serio),
|
||||||
|
sizeof_field(struct ioc3, serio)),
|
||||||
|
DEFINE_RES_IRQ(IOC3_IRQ_KBD)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mfd_cell ioc3_kbd_cells[] = {
|
||||||
|
{
|
||||||
|
.name = "ioc3-kbd",
|
||||||
|
.resources = ioc3_kbd_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_kbd_resources),
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_kbd_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
||||||
|
ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells),
|
||||||
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct resource ioc3_eth_resources[] = {
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, eth),
|
||||||
|
sizeof_field(struct ioc3, eth)),
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, ssram),
|
||||||
|
sizeof_field(struct ioc3, ssram)),
|
||||||
|
DEFINE_RES_IRQ(0)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct resource ioc3_w1_resources[] = {
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, mcr),
|
||||||
|
sizeof_field(struct ioc3, mcr)),
|
||||||
|
};
|
||||||
|
static struct sgi_w1_platform_data ioc3_w1_platform_data;
|
||||||
|
|
||||||
|
static struct mfd_cell ioc3_eth_cells[] = {
|
||||||
|
{
|
||||||
|
.name = "ioc3-eth",
|
||||||
|
.resources = ioc3_eth_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_eth_resources),
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.name = "sgi_w1",
|
||||||
|
.resources = ioc3_w1_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_w1_resources),
|
||||||
|
.platform_data = &ioc3_w1_platform_data,
|
||||||
|
.pdata_size = sizeof(ioc3_w1_platform_data),
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_eth_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Enable One-Wire bus */
|
||||||
|
writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s);
|
||||||
|
|
||||||
|
/* Generate unique identifier */
|
||||||
|
snprintf(ioc3_w1_platform_data.dev_id,
|
||||||
|
sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx",
|
||||||
|
ipd->pdev->resource->start);
|
||||||
|
|
||||||
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
||||||
|
ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells),
|
||||||
|
&ipd->pdev->resource[0], ipd->pdev->irq, NULL);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n");
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct resource ioc3_m48t35_resources[] = {
|
||||||
|
DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mfd_cell ioc3_m48t35_cells[] = {
|
||||||
|
{
|
||||||
|
.name = "rtc-m48t35",
|
||||||
|
.resources = ioc3_m48t35_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_m48t35_resources),
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
|
||||||
|
ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells),
|
||||||
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
||||||
|
if (ret)
|
||||||
|
dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct ds1685_rtc_platform_data ip30_rtc_platform_data = {
|
||||||
|
.bcd_mode = false,
|
||||||
|
.no_irq = false,
|
||||||
|
.uie_unsupported = true,
|
||||||
|
.access_type = ds1685_reg_indirect,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct resource ioc3_rtc_ds1685_resources[] = {
|
||||||
|
DEFINE_RES_MEM(IOC3_BYTEBUS_DEV1, 1),
|
||||||
|
DEFINE_RES_MEM(IOC3_BYTEBUS_DEV2, 1),
|
||||||
|
DEFINE_RES_IRQ(0)
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mfd_cell ioc3_ds1685_cells[] = {
|
||||||
|
{
|
||||||
|
.name = "rtc-ds1685",
|
||||||
|
.resources = ioc3_rtc_ds1685_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_rtc_ds1685_resources),
|
||||||
|
.platform_data = &ip30_rtc_platform_data,
|
||||||
|
.pdata_size = sizeof(ip30_rtc_platform_data),
|
||||||
|
.id = PLATFORM_DEVID_NONE,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_ds1685_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret, irq;
|
||||||
|
|
||||||
|
irq = ioc3_map_irq(ipd->pdev, 6, 0);
|
||||||
|
|
||||||
|
ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_ds1685_cells,
|
||||||
|
ARRAY_SIZE(ioc3_ds1685_cells),
|
||||||
|
&ipd->pdev->resource[0], irq, NULL);
|
||||||
|
if (ret)
|
||||||
|
dev_err(&ipd->pdev->dev, "Failed to add DS1685 subdev\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static struct resource ioc3_leds_resources[] = {
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, gppr[0]),
|
||||||
|
sizeof_field(struct ioc3, gppr[0])),
|
||||||
|
DEFINE_RES_MEM(offsetof(struct ioc3, gppr[1]),
|
||||||
|
sizeof_field(struct ioc3, gppr[1])),
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mfd_cell ioc3_led_cells[] = {
|
||||||
|
{
|
||||||
|
.name = "ip30-leds",
|
||||||
|
.resources = ioc3_leds_resources,
|
||||||
|
.num_resources = ARRAY_SIZE(ioc3_leds_resources),
|
||||||
|
.id = PLATFORM_DEVID_NONE,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ioc3_led_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_led_cells,
|
||||||
|
ARRAY_SIZE(ioc3_led_cells),
|
||||||
|
&ipd->pdev->resource[0], 0, ipd->domain);
|
||||||
|
if (ret)
|
||||||
|
dev_err(&ipd->pdev->dev, "Failed to add LED subdev\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ip27_baseio_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret, io_irq;
|
||||||
|
|
||||||
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
||||||
|
PCI_INTERRUPT_INTB);
|
||||||
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_eth_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_serial_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return ioc3_m48t35_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret, io_irq;
|
||||||
|
|
||||||
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
||||||
|
PCI_INTERRUPT_INTB);
|
||||||
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_eth_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_serial_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_m48t35_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return ioc3_kbd_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ip27_mio_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_serial_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return ioc3_kbd_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ip30_sysboard_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret, io_irq;
|
||||||
|
|
||||||
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
||||||
|
PCI_INTERRUPT_INTB);
|
||||||
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_eth_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_serial_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_kbd_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_ds1685_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return ioc3_led_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ioc3_menet_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret, io_irq;
|
||||||
|
|
||||||
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
||||||
|
PCI_INTERRUPT_INTB);
|
||||||
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_eth_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return ioc3_serial_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ioc3_menet4_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
return ioc3_eth_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
int ret, io_irq;
|
||||||
|
|
||||||
|
io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
|
||||||
|
PCI_INTERRUPT_INTB);
|
||||||
|
ret = ioc3_irq_domain_setup(ipd, io_irq);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = ioc3_eth_setup(ipd);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return ioc3_kbd_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Helper macro for filling ioc3_info array */
|
||||||
|
#define IOC3_SID(_name, _sid, _setup) \
|
||||||
|
{ \
|
||||||
|
.name = _name, \
|
||||||
|
.sid = PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_ ## _sid << 16), \
|
||||||
|
.setup = _setup, \
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct {
|
||||||
|
const char *name;
|
||||||
|
u32 sid;
|
||||||
|
int (*setup)(struct ioc3_priv_data *ipd);
|
||||||
|
} ioc3_infos[] = {
|
||||||
|
IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup),
|
||||||
|
IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup),
|
||||||
|
IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup),
|
||||||
|
IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip27_baseio6g_setup),
|
||||||
|
IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup),
|
||||||
|
IOC3_SID("MENET", MENET, &ioc3_menet_setup),
|
||||||
|
IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup)
|
||||||
|
};
|
||||||
|
#undef IOC3_SID
|
||||||
|
|
||||||
|
static int ioc3_setup(struct ioc3_priv_data *ipd)
|
||||||
|
{
|
||||||
|
u32 sid;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/* Clear IRQs */
|
||||||
|
writel(~0, &ipd->regs->sio_iec);
|
||||||
|
writel(~0, &ipd->regs->sio_ir);
|
||||||
|
writel(0, &ipd->regs->eth.eier);
|
||||||
|
writel(~0, &ipd->regs->eth.eisr);
|
||||||
|
|
||||||
|
/* Read subsystem vendor id and subsystem id */
|
||||||
|
pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++)
|
||||||
|
if (sid == ioc3_infos[i].sid) {
|
||||||
|
pr_info("ioc3: %s\n", ioc3_infos[i].name);
|
||||||
|
return ioc3_infos[i].setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Treat everything not identified by PCI subid as CAD DUO */
|
||||||
|
pr_info("ioc3: CAD DUO\n");
|
||||||
|
return ioc3_cad_duo_setup(ipd);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ioc3_mfd_probe(struct pci_dev *pdev,
|
||||||
|
const struct pci_device_id *pci_id)
|
||||||
|
{
|
||||||
|
struct ioc3_priv_data *ipd;
|
||||||
|
struct ioc3 __iomem *regs;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = pci_enable_device(pdev);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY);
|
||||||
|
pci_set_master(pdev);
|
||||||
|
|
||||||
|
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
|
||||||
|
if (ret) {
|
||||||
|
pr_err("%s: No usable DMA configuration, aborting.\n",
|
||||||
|
pci_name(pdev));
|
||||||
|
goto out_disable_device;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Set up per-IOC3 data */
|
||||||
|
ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data),
|
||||||
|
GFP_KERNEL);
|
||||||
|
if (!ipd) {
|
||||||
|
ret = -ENOMEM;
|
||||||
|
goto out_disable_device;
|
||||||
|
}
|
||||||
|
ipd->pdev = pdev;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Map all IOC3 registers. These are shared between subdevices
|
||||||
|
* so the main IOC3 module manages them.
|
||||||
|
*/
|
||||||
|
regs = pci_ioremap_bar(pdev, 0);
|
||||||
|
if (!regs) {
|
||||||
|
dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n",
|
||||||
|
pci_name(pdev));
|
||||||
|
ret = -ENOMEM;
|
||||||
|
goto out_disable_device;
|
||||||
|
}
|
||||||
|
ipd->regs = regs;
|
||||||
|
|
||||||
|
/* Track PCI-device specific data */
|
||||||
|
pci_set_drvdata(pdev, ipd);
|
||||||
|
|
||||||
|
ret = ioc3_setup(ipd);
|
||||||
|
if (ret) {
|
||||||
|
/* Remove all already added MFD devices */
|
||||||
|
mfd_remove_devices(&ipd->pdev->dev);
|
||||||
|
if (ipd->domain) {
|
||||||
|
irq_domain_remove(ipd->domain);
|
||||||
|
free_irq(ipd->domain_irq, (void *)ipd);
|
||||||
|
}
|
||||||
|
pci_iounmap(pdev, regs);
|
||||||
|
goto out_disable_device;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
out_disable_device:
|
||||||
|
pci_disable_device(pdev);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ioc3_mfd_remove(struct pci_dev *pdev)
|
||||||
|
{
|
||||||
|
struct ioc3_priv_data *ipd;
|
||||||
|
|
||||||
|
ipd = pci_get_drvdata(pdev);
|
||||||
|
|
||||||
|
/* Clear and disable all IRQs */
|
||||||
|
writel(~0, &ipd->regs->sio_iec);
|
||||||
|
writel(~0, &ipd->regs->sio_ir);
|
||||||
|
|
||||||
|
/* Release resources */
|
||||||
|
mfd_remove_devices(&ipd->pdev->dev);
|
||||||
|
if (ipd->domain) {
|
||||||
|
irq_domain_remove(ipd->domain);
|
||||||
|
free_irq(ipd->domain_irq, (void *)ipd);
|
||||||
|
}
|
||||||
|
pci_iounmap(pdev, ipd->regs);
|
||||||
|
pci_disable_device(pdev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_device_id ioc3_mfd_id_table[] = {
|
||||||
|
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
|
||||||
|
{ 0, },
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table);
|
||||||
|
|
||||||
|
static struct pci_driver ioc3_mfd_driver = {
|
||||||
|
.name = "IOC3",
|
||||||
|
.id_table = ioc3_mfd_id_table,
|
||||||
|
.probe = ioc3_mfd_probe,
|
||||||
|
.remove = ioc3_mfd_remove,
|
||||||
|
};
|
||||||
|
|
||||||
|
module_pci_driver(ioc3_mfd_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
|
||||||
|
MODULE_DESCRIPTION("SGI IOC3 MFD driver");
|
||||||
|
MODULE_LICENSE("GPL v2");
|
@ -6,7 +6,7 @@
|
|||||||
config NET_VENDOR_SGI
|
config NET_VENDOR_SGI
|
||||||
bool "SGI devices"
|
bool "SGI devices"
|
||||||
default y
|
default y
|
||||||
depends on (PCI && SGI_IP27) || SGI_IP32
|
depends on (PCI && SGI_MFD_IOC3) || SGI_IP32
|
||||||
---help---
|
---help---
|
||||||
If you have a network (Ethernet) card belonging to this class, say Y.
|
If you have a network (Ethernet) card belonging to this class, say Y.
|
||||||
|
|
||||||
@ -19,7 +19,8 @@ if NET_VENDOR_SGI
|
|||||||
|
|
||||||
config SGI_IOC3_ETH
|
config SGI_IOC3_ETH
|
||||||
bool "SGI IOC3 Ethernet"
|
bool "SGI IOC3 Ethernet"
|
||||||
depends on PCI && SGI_IP27
|
depends on PCI && SGI_MFD_IOC3
|
||||||
|
select CRC16
|
||||||
select CRC32
|
select CRC32
|
||||||
select MII
|
select MII
|
||||||
---help---
|
---help---
|
||||||
|
@ -14,7 +14,6 @@
|
|||||||
* o Use prefetching for large packets. What is a good lower limit for
|
* o Use prefetching for large packets. What is a good lower limit for
|
||||||
* prefetching?
|
* prefetching?
|
||||||
* o Use hardware checksums.
|
* o Use hardware checksums.
|
||||||
* o Convert to using a IOC3 meta driver.
|
|
||||||
* o Which PHYs might possibly be attached to the IOC3 in real live,
|
* o Which PHYs might possibly be attached to the IOC3 in real live,
|
||||||
* which workarounds are required for them? Do we ever have Lucent's?
|
* which workarounds are required for them? Do we ever have Lucent's?
|
||||||
* o For the 2.5 branch kill the mii-tool ioctls.
|
* o For the 2.5 branch kill the mii-tool ioctls.
|
||||||
@ -28,7 +27,8 @@
|
|||||||
#include <linux/mm.h>
|
#include <linux/mm.h>
|
||||||
#include <linux/errno.h>
|
#include <linux/errno.h>
|
||||||
#include <linux/module.h>
|
#include <linux/module.h>
|
||||||
#include <linux/pci.h>
|
#include <linux/init.h>
|
||||||
|
#include <linux/crc16.h>
|
||||||
#include <linux/crc32.h>
|
#include <linux/crc32.h>
|
||||||
#include <linux/mii.h>
|
#include <linux/mii.h>
|
||||||
#include <linux/in.h>
|
#include <linux/in.h>
|
||||||
@ -37,28 +37,22 @@
|
|||||||
#include <linux/tcp.h>
|
#include <linux/tcp.h>
|
||||||
#include <linux/udp.h>
|
#include <linux/udp.h>
|
||||||
#include <linux/gfp.h>
|
#include <linux/gfp.h>
|
||||||
|
|
||||||
#ifdef CONFIG_SERIAL_8250
|
|
||||||
#include <linux/serial_core.h>
|
|
||||||
#include <linux/serial_8250.h>
|
|
||||||
#include <linux/serial_reg.h>
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#include <linux/netdevice.h>
|
#include <linux/netdevice.h>
|
||||||
#include <linux/etherdevice.h>
|
#include <linux/etherdevice.h>
|
||||||
#include <linux/ethtool.h>
|
#include <linux/ethtool.h>
|
||||||
#include <linux/skbuff.h>
|
#include <linux/skbuff.h>
|
||||||
#include <linux/dma-mapping.h>
|
#include <linux/dma-mapping.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/nvmem-consumer.h>
|
||||||
|
|
||||||
#include <net/ip.h>
|
#include <net/ip.h>
|
||||||
|
|
||||||
#include <asm/byteorder.h>
|
|
||||||
#include <asm/pgtable.h>
|
|
||||||
#include <linux/uaccess.h>
|
|
||||||
#include <asm/sn/types.h>
|
|
||||||
#include <asm/sn/ioc3.h>
|
#include <asm/sn/ioc3.h>
|
||||||
#include <asm/pci/bridge.h>
|
#include <asm/pci/bridge.h>
|
||||||
|
|
||||||
|
#define CRC16_INIT 0
|
||||||
|
#define CRC16_VALID 0xb001
|
||||||
|
|
||||||
/* Number of RX buffers. This is tunable in the range of 16 <= x < 512.
|
/* Number of RX buffers. This is tunable in the range of 16 <= x < 512.
|
||||||
* The value must be a power of two.
|
* The value must be a power of two.
|
||||||
*/
|
*/
|
||||||
@ -85,7 +79,6 @@
|
|||||||
/* Private per NIC data of the driver. */
|
/* Private per NIC data of the driver. */
|
||||||
struct ioc3_private {
|
struct ioc3_private {
|
||||||
struct ioc3_ethregs *regs;
|
struct ioc3_ethregs *regs;
|
||||||
struct ioc3 *all_regs;
|
|
||||||
struct device *dma_dev;
|
struct device *dma_dev;
|
||||||
u32 *ssram;
|
u32 *ssram;
|
||||||
unsigned long *rxr; /* pointer to receiver ring */
|
unsigned long *rxr; /* pointer to receiver ring */
|
||||||
@ -104,9 +97,6 @@ struct ioc3_private {
|
|||||||
spinlock_t ioc3_lock;
|
spinlock_t ioc3_lock;
|
||||||
struct mii_if_info mii;
|
struct mii_if_info mii;
|
||||||
|
|
||||||
struct net_device *dev;
|
|
||||||
struct pci_dev *pdev;
|
|
||||||
|
|
||||||
/* Members used by autonegotiation */
|
/* Members used by autonegotiation */
|
||||||
struct timer_list ioc3_timer;
|
struct timer_list ioc3_timer;
|
||||||
};
|
};
|
||||||
@ -123,10 +113,8 @@ static int ioc3_alloc_rx_bufs(struct net_device *dev);
|
|||||||
static void ioc3_free_rx_bufs(struct ioc3_private *ip);
|
static void ioc3_free_rx_bufs(struct ioc3_private *ip);
|
||||||
static inline void ioc3_clean_tx_ring(struct ioc3_private *ip);
|
static inline void ioc3_clean_tx_ring(struct ioc3_private *ip);
|
||||||
|
|
||||||
static const char ioc3_str[] = "IOC3 Ethernet";
|
|
||||||
static const struct ethtool_ops ioc3_ethtool_ops;
|
static const struct ethtool_ops ioc3_ethtool_ops;
|
||||||
|
|
||||||
|
|
||||||
static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
|
static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
|
||||||
{
|
{
|
||||||
return (~addr + 1) & (IOC3_DMA_XFER_LEN - 1UL);
|
return (~addr + 1) & (IOC3_DMA_XFER_LEN - 1UL);
|
||||||
@ -179,225 +167,61 @@ static inline unsigned long ioc3_map(dma_addr_t addr, unsigned long attr)
|
|||||||
#define ERBAR_VAL 0
|
#define ERBAR_VAL 0
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define IOC3_SIZE 0x100000
|
static int ioc3eth_nvmem_match(struct device *dev, const void *data)
|
||||||
|
|
||||||
static inline u32 mcr_pack(u32 pulse, u32 sample)
|
|
||||||
{
|
{
|
||||||
return (pulse << 10) | (sample << 2);
|
const char *name = dev_name(dev);
|
||||||
}
|
const char *prefix = data;
|
||||||
|
int prefix_len;
|
||||||
|
|
||||||
static int nic_wait(u32 __iomem *mcr)
|
prefix_len = strlen(prefix);
|
||||||
{
|
if (strlen(name) < (prefix_len + 3))
|
||||||
u32 m;
|
return 0;
|
||||||
|
|
||||||
do {
|
if (memcmp(prefix, name, prefix_len) != 0)
|
||||||
m = readl(mcr);
|
return 0;
|
||||||
} while (!(m & 2));
|
|
||||||
|
|
||||||
return m & 1;
|
/* found nvmem device which is attached to our ioc3
|
||||||
}
|
* now check for one wire family code 09, 89 and 91
|
||||||
|
*/
|
||||||
static int nic_reset(u32 __iomem *mcr)
|
if (memcmp(name + prefix_len, "09-", 3) == 0)
|
||||||
{
|
return 1;
|
||||||
int presence;
|
if (memcmp(name + prefix_len, "89-", 3) == 0)
|
||||||
|
return 1;
|
||||||
writel(mcr_pack(500, 65), mcr);
|
if (memcmp(name + prefix_len, "91-", 3) == 0)
|
||||||
presence = nic_wait(mcr);
|
return 1;
|
||||||
|
|
||||||
writel(mcr_pack(0, 500), mcr);
|
|
||||||
nic_wait(mcr);
|
|
||||||
|
|
||||||
return presence;
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline int nic_read_bit(u32 __iomem *mcr)
|
|
||||||
{
|
|
||||||
int result;
|
|
||||||
|
|
||||||
writel(mcr_pack(6, 13), mcr);
|
|
||||||
result = nic_wait(mcr);
|
|
||||||
writel(mcr_pack(0, 100), mcr);
|
|
||||||
nic_wait(mcr);
|
|
||||||
|
|
||||||
return result;
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void nic_write_bit(u32 __iomem *mcr, int bit)
|
|
||||||
{
|
|
||||||
if (bit)
|
|
||||||
writel(mcr_pack(6, 110), mcr);
|
|
||||||
else
|
|
||||||
writel(mcr_pack(80, 30), mcr);
|
|
||||||
|
|
||||||
nic_wait(mcr);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Read a byte from an iButton device
|
|
||||||
*/
|
|
||||||
static u32 nic_read_byte(u32 __iomem *mcr)
|
|
||||||
{
|
|
||||||
u32 result = 0;
|
|
||||||
int i;
|
|
||||||
|
|
||||||
for (i = 0; i < 8; i++)
|
|
||||||
result = (result >> 1) | (nic_read_bit(mcr) << 7);
|
|
||||||
|
|
||||||
return result;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Write a byte to an iButton device
|
|
||||||
*/
|
|
||||||
static void nic_write_byte(u32 __iomem *mcr, int byte)
|
|
||||||
{
|
|
||||||
int i, bit;
|
|
||||||
|
|
||||||
for (i = 8; i; i--) {
|
|
||||||
bit = byte & 1;
|
|
||||||
byte >>= 1;
|
|
||||||
|
|
||||||
nic_write_bit(mcr, bit);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static u64 nic_find(u32 __iomem *mcr, int *last)
|
|
||||||
{
|
|
||||||
int a, b, index, disc;
|
|
||||||
u64 address = 0;
|
|
||||||
|
|
||||||
nic_reset(mcr);
|
|
||||||
/* Search ROM. */
|
|
||||||
nic_write_byte(mcr, 0xf0);
|
|
||||||
|
|
||||||
/* Algorithm from ``Book of iButton Standards''. */
|
|
||||||
for (index = 0, disc = 0; index < 64; index++) {
|
|
||||||
a = nic_read_bit(mcr);
|
|
||||||
b = nic_read_bit(mcr);
|
|
||||||
|
|
||||||
if (a && b) {
|
|
||||||
pr_warn("NIC search failed (not fatal).\n");
|
|
||||||
*last = 0;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (!a && !b) {
|
|
||||||
if (index == *last) {
|
|
||||||
address |= 1UL << index;
|
|
||||||
} else if (index > *last) {
|
|
||||||
address &= ~(1UL << index);
|
|
||||||
disc = index;
|
|
||||||
} else if ((address & (1UL << index)) == 0) {
|
|
||||||
disc = index;
|
|
||||||
}
|
|
||||||
nic_write_bit(mcr, address & (1UL << index));
|
|
||||||
continue;
|
|
||||||
} else {
|
|
||||||
if (a)
|
|
||||||
address |= 1UL << index;
|
|
||||||
else
|
|
||||||
address &= ~(1UL << index);
|
|
||||||
nic_write_bit(mcr, a);
|
|
||||||
continue;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
*last = disc;
|
|
||||||
|
|
||||||
return address;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int nic_init(u32 __iomem *mcr)
|
|
||||||
{
|
|
||||||
const char *unknown = "unknown";
|
|
||||||
const char *type = unknown;
|
|
||||||
u8 crc;
|
|
||||||
u8 serial[6];
|
|
||||||
int save = 0, i;
|
|
||||||
|
|
||||||
while (1) {
|
|
||||||
u64 reg;
|
|
||||||
|
|
||||||
reg = nic_find(mcr, &save);
|
|
||||||
|
|
||||||
switch (reg & 0xff) {
|
|
||||||
case 0x91:
|
|
||||||
type = "DS1981U";
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
if (save == 0) {
|
|
||||||
/* Let the caller try again. */
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
continue;
|
|
||||||
}
|
|
||||||
|
|
||||||
nic_reset(mcr);
|
|
||||||
|
|
||||||
/* Match ROM. */
|
|
||||||
nic_write_byte(mcr, 0x55);
|
|
||||||
for (i = 0; i < 8; i++)
|
|
||||||
nic_write_byte(mcr, (reg >> (i << 3)) & 0xff);
|
|
||||||
|
|
||||||
reg >>= 8; /* Shift out type. */
|
|
||||||
for (i = 0; i < 6; i++) {
|
|
||||||
serial[i] = reg & 0xff;
|
|
||||||
reg >>= 8;
|
|
||||||
}
|
|
||||||
crc = reg & 0xff;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
pr_info("Found %s NIC", type);
|
|
||||||
if (type != unknown)
|
|
||||||
pr_cont(" registration number %pM, CRC %02x", serial, crc);
|
|
||||||
pr_cont(".\n");
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Read the NIC (Number-In-a-Can) device used to store the MAC address on
|
static int ioc3eth_get_mac_addr(struct resource *res, u8 mac_addr[6])
|
||||||
* SN0 / SN00 nodeboards and PCI cards.
|
|
||||||
*/
|
|
||||||
static void ioc3_get_eaddr_nic(struct ioc3_private *ip)
|
|
||||||
{
|
{
|
||||||
u32 __iomem *mcr = &ip->all_regs->mcr;
|
struct nvmem_device *nvmem;
|
||||||
int tries = 2; /* There may be some problem with the battery? */
|
char prefix[24];
|
||||||
u8 nic[14];
|
u8 prom[16];
|
||||||
|
int ret;
|
||||||
int i;
|
int i;
|
||||||
|
|
||||||
writel(1 << 21, &ip->all_regs->gpcr_s);
|
snprintf(prefix, sizeof(prefix), "ioc3-%012llx-",
|
||||||
|
res->start & ~0xffff);
|
||||||
|
|
||||||
while (tries--) {
|
nvmem = nvmem_device_find(prefix, ioc3eth_nvmem_match);
|
||||||
if (!nic_init(mcr))
|
if (IS_ERR(nvmem))
|
||||||
break;
|
return PTR_ERR(nvmem);
|
||||||
udelay(500);
|
|
||||||
}
|
|
||||||
|
|
||||||
if (tries < 0) {
|
ret = nvmem_device_read(nvmem, 0, 16, prom);
|
||||||
pr_err("Failed to read MAC address\n");
|
nvmem_device_put(nvmem);
|
||||||
return;
|
if (ret < 0)
|
||||||
}
|
return ret;
|
||||||
|
|
||||||
/* Read Memory. */
|
/* check, if content is valid */
|
||||||
nic_write_byte(mcr, 0xf0);
|
if (prom[0] != 0x0a ||
|
||||||
nic_write_byte(mcr, 0x00);
|
crc16(CRC16_INIT, prom, 13) != CRC16_VALID)
|
||||||
nic_write_byte(mcr, 0x00);
|
return -EINVAL;
|
||||||
|
|
||||||
for (i = 13; i >= 0; i--)
|
for (i = 0; i < 6; i++)
|
||||||
nic[i] = nic_read_byte(mcr);
|
mac_addr[i] = prom[10 - i];
|
||||||
|
|
||||||
for (i = 2; i < 8; i++)
|
return 0;
|
||||||
ip->dev->dev_addr[i - 2] = nic[i];
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Ok, this is hosed by design. It's necessary to know what machine the
|
|
||||||
* NIC is in in order to know how to read the NIC address. We also have
|
|
||||||
* to know if it's a PCI card or a NIC in on the node board ...
|
|
||||||
*/
|
|
||||||
static void ioc3_get_eaddr(struct ioc3_private *ip)
|
|
||||||
{
|
|
||||||
ioc3_get_eaddr_nic(ip);
|
|
||||||
|
|
||||||
pr_info("Ethernet address is %pM.\n", ip->dev->dev_addr);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void __ioc3_set_mac_address(struct net_device *dev)
|
static void __ioc3_set_mac_address(struct net_device *dev)
|
||||||
@ -770,7 +594,7 @@ static int ioc3_mii_init(struct ioc3_private *ip)
|
|||||||
u16 word;
|
u16 word;
|
||||||
|
|
||||||
for (i = 0; i < 32; i++) {
|
for (i = 0; i < 32; i++) {
|
||||||
word = ioc3_mdio_read(ip->dev, i, MII_PHYSID1);
|
word = ioc3_mdio_read(ip->mii.dev, i, MII_PHYSID1);
|
||||||
|
|
||||||
if (word != 0xffff && word != 0x0000) {
|
if (word != 0xffff && word != 0x0000) {
|
||||||
found = 1;
|
found = 1;
|
||||||
@ -975,12 +799,6 @@ static int ioc3_open(struct net_device *dev)
|
|||||||
{
|
{
|
||||||
struct ioc3_private *ip = netdev_priv(dev);
|
struct ioc3_private *ip = netdev_priv(dev);
|
||||||
|
|
||||||
if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
|
|
||||||
netdev_err(dev, "Can't get irq %d\n", dev->irq);
|
|
||||||
|
|
||||||
return -EAGAIN;
|
|
||||||
}
|
|
||||||
|
|
||||||
ip->ehar_h = 0;
|
ip->ehar_h = 0;
|
||||||
ip->ehar_l = 0;
|
ip->ehar_l = 0;
|
||||||
|
|
||||||
@ -1013,159 +831,6 @@ static int ioc3_close(struct net_device *dev)
|
|||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* MENET cards have four IOC3 chips, which are attached to two sets of
|
|
||||||
* PCI slot resources each: the primary connections are on slots
|
|
||||||
* 0..3 and the secondaries are on 4..7
|
|
||||||
*
|
|
||||||
* All four ethernets are brought out to connectors; six serial ports
|
|
||||||
* (a pair from each of the first three IOC3s) are brought out to
|
|
||||||
* MiniDINs; all other subdevices are left swinging in the wind, leave
|
|
||||||
* them disabled.
|
|
||||||
*/
|
|
||||||
|
|
||||||
static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
|
|
||||||
{
|
|
||||||
struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0));
|
|
||||||
int ret = 0;
|
|
||||||
|
|
||||||
if (dev) {
|
|
||||||
if (dev->vendor == PCI_VENDOR_ID_SGI &&
|
|
||||||
dev->device == PCI_DEVICE_ID_SGI_IOC3)
|
|
||||||
ret = 1;
|
|
||||||
pci_dev_put(dev);
|
|
||||||
}
|
|
||||||
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int ioc3_is_menet(struct pci_dev *pdev)
|
|
||||||
{
|
|
||||||
return !pdev->bus->parent &&
|
|
||||||
ioc3_adjacent_is_ioc3(pdev, 0) &&
|
|
||||||
ioc3_adjacent_is_ioc3(pdev, 1) &&
|
|
||||||
ioc3_adjacent_is_ioc3(pdev, 2);
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef CONFIG_SERIAL_8250
|
|
||||||
/* Note about serial ports and consoles:
|
|
||||||
* For console output, everyone uses the IOC3 UARTA (offset 0x178)
|
|
||||||
* connected to the master node (look in ip27_setup_console() and
|
|
||||||
* ip27prom_console_write()).
|
|
||||||
*
|
|
||||||
* For serial (/dev/ttyS0 etc), we can not have hardcoded serial port
|
|
||||||
* addresses on a partitioned machine. Since we currently use the ioc3
|
|
||||||
* serial ports, we use dynamic serial port discovery that the serial.c
|
|
||||||
* driver uses for pci/pnp ports (there is an entry for the SGI ioc3
|
|
||||||
* boards in pci_boards[]). Unfortunately, UARTA's pio address is greater
|
|
||||||
* than UARTB's, although UARTA on o200s has traditionally been known as
|
|
||||||
* port 0. So, we just use one serial port from each ioc3 (since the
|
|
||||||
* serial driver adds addresses to get to higher ports).
|
|
||||||
*
|
|
||||||
* The first one to do a register_console becomes the preferred console
|
|
||||||
* (if there is no kernel command line console= directive). /dev/console
|
|
||||||
* (ie 5, 1) is then "aliased" into the device number returned by the
|
|
||||||
* "device" routine referred to in this console structure
|
|
||||||
* (ip27prom_console_dev).
|
|
||||||
*
|
|
||||||
* Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working
|
|
||||||
* around ioc3 oddities in this respect.
|
|
||||||
*
|
|
||||||
* The IOC3 serials use a 22MHz clock rate with an additional divider which
|
|
||||||
* can be programmed in the SCR register if the DLAB bit is set.
|
|
||||||
*
|
|
||||||
* Register to interrupt zero because we share the interrupt with
|
|
||||||
* the serial driver which we don't properly support yet.
|
|
||||||
*
|
|
||||||
* Can't use UPF_IOREMAP as the whole of IOC3 resources have already been
|
|
||||||
* registered.
|
|
||||||
*/
|
|
||||||
static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
|
|
||||||
{
|
|
||||||
return readb(p->membase + (offset ^ 3));
|
|
||||||
}
|
|
||||||
|
|
||||||
static void ioc3_serial_out(struct uart_port *p, int offset, int value)
|
|
||||||
{
|
|
||||||
writeb(value, p->membase + (offset ^ 3));
|
|
||||||
}
|
|
||||||
|
|
||||||
static void ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
|
|
||||||
{
|
|
||||||
#define COSMISC_CONSTANT 6
|
|
||||||
|
|
||||||
struct uart_8250_port port = {
|
|
||||||
.port = {
|
|
||||||
.irq = 0,
|
|
||||||
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
|
|
||||||
.iotype = UPIO_MEM,
|
|
||||||
.regshift = 0,
|
|
||||||
.uartclk = (22000000 << 1) / COSMISC_CONSTANT,
|
|
||||||
|
|
||||||
.membase = (unsigned char __iomem *)uart,
|
|
||||||
.mapbase = (unsigned long)uart,
|
|
||||||
.serial_in = ioc3_serial_in,
|
|
||||||
.serial_out = ioc3_serial_out,
|
|
||||||
}
|
|
||||||
};
|
|
||||||
unsigned char lcr;
|
|
||||||
|
|
||||||
lcr = readb(&uart->iu_lcr);
|
|
||||||
writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr);
|
|
||||||
writeb(COSMISC_CONSTANT, &uart->iu_scr);
|
|
||||||
writeb(lcr, &uart->iu_lcr);
|
|
||||||
readb(&uart->iu_lcr);
|
|
||||||
serial8250_register_8250_port(&port);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
|
|
||||||
{
|
|
||||||
u32 sio_iec;
|
|
||||||
|
|
||||||
/* We need to recognice and treat the fourth MENET serial as it
|
|
||||||
* does not have an SuperIO chip attached to it, therefore attempting
|
|
||||||
* to access it will result in bus errors. We call something an
|
|
||||||
* MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3
|
|
||||||
* in it. This is paranoid but we want to avoid blowing up on a
|
|
||||||
* showhorn PCI box that happens to have 4 IOC3 cards in it so it's
|
|
||||||
* not paranoid enough ...
|
|
||||||
*/
|
|
||||||
if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3)
|
|
||||||
return;
|
|
||||||
|
|
||||||
/* Switch IOC3 to PIO mode. It probably already was but let's be
|
|
||||||
* paranoid
|
|
||||||
*/
|
|
||||||
writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL, &ioc3->gpcr_s);
|
|
||||||
readl(&ioc3->gpcr_s);
|
|
||||||
writel(0, &ioc3->gppr[6]);
|
|
||||||
readl(&ioc3->gppr[6]);
|
|
||||||
writel(0, &ioc3->gppr[7]);
|
|
||||||
readl(&ioc3->gppr[7]);
|
|
||||||
writel(readl(&ioc3->port_a.sscr) & ~SSCR_DMA_EN, &ioc3->port_a.sscr);
|
|
||||||
readl(&ioc3->port_a.sscr);
|
|
||||||
writel(readl(&ioc3->port_b.sscr) & ~SSCR_DMA_EN, &ioc3->port_b.sscr);
|
|
||||||
readl(&ioc3->port_b.sscr);
|
|
||||||
/* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */
|
|
||||||
sio_iec = readl(&ioc3->sio_iec);
|
|
||||||
sio_iec &= ~(SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL |
|
|
||||||
SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER |
|
|
||||||
SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS |
|
|
||||||
SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR);
|
|
||||||
sio_iec |= SIO_IR_SA_INT;
|
|
||||||
sio_iec &= ~(SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL |
|
|
||||||
SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER |
|
|
||||||
SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS |
|
|
||||||
SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR);
|
|
||||||
sio_iec |= SIO_IR_SB_INT;
|
|
||||||
writel(sio_iec, &ioc3->sio_iec);
|
|
||||||
writel(0, &ioc3->port_a.sscr);
|
|
||||||
writel(0, &ioc3->port_b.sscr);
|
|
||||||
|
|
||||||
ioc3_8250_register(&ioc3->sregs.uarta);
|
|
||||||
ioc3_8250_register(&ioc3->sregs.uartb);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
static const struct net_device_ops ioc3_netdev_ops = {
|
static const struct net_device_ops ioc3_netdev_ops = {
|
||||||
.ndo_open = ioc3_open,
|
.ndo_open = ioc3_open,
|
||||||
.ndo_stop = ioc3_close,
|
.ndo_stop = ioc3_close,
|
||||||
@ -1178,61 +843,52 @@ static const struct net_device_ops ioc3_netdev_ops = {
|
|||||||
.ndo_set_mac_address = ioc3_set_mac_address,
|
.ndo_set_mac_address = ioc3_set_mac_address,
|
||||||
};
|
};
|
||||||
|
|
||||||
static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
static int ioc3eth_probe(struct platform_device *pdev)
|
||||||
{
|
{
|
||||||
unsigned int sw_physid1, sw_physid2;
|
u32 sw_physid1, sw_physid2, vendor, model, rev;
|
||||||
struct net_device *dev = NULL;
|
|
||||||
struct ioc3_private *ip;
|
struct ioc3_private *ip;
|
||||||
struct ioc3 *ioc3;
|
struct net_device *dev;
|
||||||
unsigned long ioc3_base, ioc3_size;
|
struct resource *regs;
|
||||||
u32 vendor, model, rev;
|
u8 mac_addr[6];
|
||||||
int err;
|
int err;
|
||||||
|
|
||||||
/* Configure DMA attributes. */
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||||
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
|
/* get mac addr from one wire prom */
|
||||||
if (err) {
|
if (ioc3eth_get_mac_addr(regs, mac_addr))
|
||||||
pr_err("%s: No usable DMA configuration, aborting.\n",
|
return -EPROBE_DEFER; /* not available yet */
|
||||||
pci_name(pdev));
|
|
||||||
goto out;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (pci_enable_device(pdev))
|
|
||||||
return -ENODEV;
|
|
||||||
|
|
||||||
dev = alloc_etherdev(sizeof(struct ioc3_private));
|
dev = alloc_etherdev(sizeof(struct ioc3_private));
|
||||||
if (!dev) {
|
if (!dev)
|
||||||
err = -ENOMEM;
|
return -ENOMEM;
|
||||||
goto out_disable;
|
|
||||||
}
|
|
||||||
|
|
||||||
err = pci_request_regions(pdev, "ioc3");
|
|
||||||
if (err)
|
|
||||||
goto out_free;
|
|
||||||
|
|
||||||
SET_NETDEV_DEV(dev, &pdev->dev);
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
||||||
|
|
||||||
ip = netdev_priv(dev);
|
ip = netdev_priv(dev);
|
||||||
ip->dev = dev;
|
ip->dma_dev = pdev->dev.parent;
|
||||||
ip->dma_dev = &pdev->dev;
|
ip->regs = devm_platform_ioremap_resource(pdev, 0);
|
||||||
|
if (!ip->regs) {
|
||||||
dev->irq = pdev->irq;
|
|
||||||
|
|
||||||
ioc3_base = pci_resource_start(pdev, 0);
|
|
||||||
ioc3_size = pci_resource_len(pdev, 0);
|
|
||||||
ioc3 = (struct ioc3 *)ioremap(ioc3_base, ioc3_size);
|
|
||||||
if (!ioc3) {
|
|
||||||
pr_err("ioc3eth(%s): ioremap failed, goodbye.\n",
|
|
||||||
pci_name(pdev));
|
|
||||||
err = -ENOMEM;
|
err = -ENOMEM;
|
||||||
goto out_res;
|
goto out_free;
|
||||||
}
|
}
|
||||||
ip->regs = &ioc3->eth;
|
|
||||||
ip->ssram = ioc3->ssram;
|
|
||||||
ip->all_regs = ioc3;
|
|
||||||
|
|
||||||
#ifdef CONFIG_SERIAL_8250
|
ip->ssram = devm_platform_ioremap_resource(pdev, 1);
|
||||||
ioc3_serial_probe(pdev, ioc3);
|
if (!ip->ssram) {
|
||||||
#endif
|
err = -ENOMEM;
|
||||||
|
goto out_free;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev->irq = platform_get_irq(pdev, 0);
|
||||||
|
if (dev->irq < 0) {
|
||||||
|
err = dev->irq;
|
||||||
|
goto out_free;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (devm_request_irq(&pdev->dev, dev->irq, ioc3_interrupt,
|
||||||
|
IRQF_SHARED, "ioc3-eth", dev)) {
|
||||||
|
dev_err(&pdev->dev, "Can't get irq %d\n", dev->irq);
|
||||||
|
err = -ENODEV;
|
||||||
|
goto out_free;
|
||||||
|
}
|
||||||
|
|
||||||
spin_lock_init(&ip->ioc3_lock);
|
spin_lock_init(&ip->ioc3_lock);
|
||||||
timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
|
timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
|
||||||
@ -1262,8 +918,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||||||
|
|
||||||
ioc3_init(dev);
|
ioc3_init(dev);
|
||||||
|
|
||||||
ip->pdev = pdev;
|
|
||||||
|
|
||||||
ip->mii.phy_id_mask = 0x1f;
|
ip->mii.phy_id_mask = 0x1f;
|
||||||
ip->mii.reg_num_mask = 0x1f;
|
ip->mii.reg_num_mask = 0x1f;
|
||||||
ip->mii.dev = dev;
|
ip->mii.dev = dev;
|
||||||
@ -1273,15 +927,14 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||||||
ioc3_mii_init(ip);
|
ioc3_mii_init(ip);
|
||||||
|
|
||||||
if (ip->mii.phy_id == -1) {
|
if (ip->mii.phy_id == -1) {
|
||||||
pr_err("ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
|
netdev_err(dev, "Didn't find a PHY, goodbye.\n");
|
||||||
pci_name(pdev));
|
|
||||||
err = -ENODEV;
|
err = -ENODEV;
|
||||||
goto out_stop;
|
goto out_stop;
|
||||||
}
|
}
|
||||||
|
|
||||||
ioc3_mii_start(ip);
|
ioc3_mii_start(ip);
|
||||||
ioc3_ssram_disc(ip);
|
ioc3_ssram_disc(ip);
|
||||||
ioc3_get_eaddr(ip);
|
memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
|
||||||
|
|
||||||
/* The IOC3-specific entries in the device structure. */
|
/* The IOC3-specific entries in the device structure. */
|
||||||
dev->watchdog_timeo = 5 * HZ;
|
dev->watchdog_timeo = 5 * HZ;
|
||||||
@ -1318,21 +971,14 @@ out_stop:
|
|||||||
if (ip->tx_ring)
|
if (ip->tx_ring)
|
||||||
dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->tx_ring,
|
dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->tx_ring,
|
||||||
ip->txr_dma);
|
ip->txr_dma);
|
||||||
out_res:
|
|
||||||
pci_release_regions(pdev);
|
|
||||||
out_free:
|
out_free:
|
||||||
free_netdev(dev);
|
free_netdev(dev);
|
||||||
out_disable:
|
|
||||||
/* We should call pci_disable_device(pdev); here if the IOC3 wasn't
|
|
||||||
* such a weird device ...
|
|
||||||
*/
|
|
||||||
out:
|
|
||||||
return err;
|
return err;
|
||||||
}
|
}
|
||||||
|
|
||||||
static void ioc3_remove_one(struct pci_dev *pdev)
|
static int ioc3eth_remove(struct platform_device *pdev)
|
||||||
{
|
{
|
||||||
struct net_device *dev = pci_get_drvdata(pdev);
|
struct net_device *dev = platform_get_drvdata(pdev);
|
||||||
struct ioc3_private *ip = netdev_priv(dev);
|
struct ioc3_private *ip = netdev_priv(dev);
|
||||||
|
|
||||||
dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr, ip->rxr_dma);
|
dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr, ip->rxr_dma);
|
||||||
@ -1340,27 +986,11 @@ static void ioc3_remove_one(struct pci_dev *pdev)
|
|||||||
|
|
||||||
unregister_netdev(dev);
|
unregister_netdev(dev);
|
||||||
del_timer_sync(&ip->ioc3_timer);
|
del_timer_sync(&ip->ioc3_timer);
|
||||||
|
|
||||||
iounmap(ip->all_regs);
|
|
||||||
pci_release_regions(pdev);
|
|
||||||
free_netdev(dev);
|
free_netdev(dev);
|
||||||
/* We should call pci_disable_device(pdev); here if the IOC3 wasn't
|
|
||||||
* such a weird device ...
|
return 0;
|
||||||
*/
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static const struct pci_device_id ioc3_pci_tbl[] = {
|
|
||||||
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
|
|
||||||
{ 0 }
|
|
||||||
};
|
|
||||||
MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl);
|
|
||||||
|
|
||||||
static struct pci_driver ioc3_driver = {
|
|
||||||
.name = "ioc3-eth",
|
|
||||||
.id_table = ioc3_pci_tbl,
|
|
||||||
.probe = ioc3_probe,
|
|
||||||
.remove = ioc3_remove_one,
|
|
||||||
};
|
|
||||||
|
|
||||||
static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
||||||
{
|
{
|
||||||
@ -1542,11 +1172,10 @@ static inline unsigned int ioc3_hash(const unsigned char *addr)
|
|||||||
static void ioc3_get_drvinfo(struct net_device *dev,
|
static void ioc3_get_drvinfo(struct net_device *dev,
|
||||||
struct ethtool_drvinfo *info)
|
struct ethtool_drvinfo *info)
|
||||||
{
|
{
|
||||||
struct ioc3_private *ip = netdev_priv(dev);
|
|
||||||
|
|
||||||
strlcpy(info->driver, IOC3_NAME, sizeof(info->driver));
|
strlcpy(info->driver, IOC3_NAME, sizeof(info->driver));
|
||||||
strlcpy(info->version, IOC3_VERSION, sizeof(info->version));
|
strlcpy(info->version, IOC3_VERSION, sizeof(info->version));
|
||||||
strlcpy(info->bus_info, pci_name(ip->pdev), sizeof(info->bus_info));
|
strlcpy(info->bus_info, pci_name(to_pci_dev(dev->dev.parent)),
|
||||||
|
sizeof(info->bus_info));
|
||||||
}
|
}
|
||||||
|
|
||||||
static int ioc3_get_link_ksettings(struct net_device *dev,
|
static int ioc3_get_link_ksettings(struct net_device *dev,
|
||||||
@ -1658,7 +1287,16 @@ static void ioc3_set_multicast_list(struct net_device *dev)
|
|||||||
spin_unlock_irq(&ip->ioc3_lock);
|
spin_unlock_irq(&ip->ioc3_lock);
|
||||||
}
|
}
|
||||||
|
|
||||||
module_pci_driver(ioc3_driver);
|
static struct platform_driver ioc3eth_driver = {
|
||||||
|
.probe = ioc3eth_probe,
|
||||||
|
.remove = ioc3eth_remove,
|
||||||
|
.driver = {
|
||||||
|
.name = "ioc3-eth",
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(ioc3eth_driver);
|
||||||
|
|
||||||
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
|
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
|
||||||
MODULE_DESCRIPTION("SGI IOC3 Ethernet driver");
|
MODULE_DESCRIPTION("SGI IOC3 Ethernet driver");
|
||||||
MODULE_LICENSE("GPL");
|
MODULE_LICENSE("GPL");
|
||||||
|
98
drivers/tty/serial/8250/8250_ioc3.c
Normal file
98
drivers/tty/serial/8250/8250_ioc3.c
Normal file
@ -0,0 +1,98 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0
|
||||||
|
/*
|
||||||
|
* SGI IOC3 8250 UART driver
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
|
||||||
|
*
|
||||||
|
* based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
|
||||||
|
* Copyright (C) 2014 Joshua Kinard <kumba@gentoo.org>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/errno.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
|
||||||
|
#include "8250.h"
|
||||||
|
|
||||||
|
#define IOC3_UARTCLK (22000000 / 3)
|
||||||
|
|
||||||
|
struct ioc3_8250_data {
|
||||||
|
int line;
|
||||||
|
};
|
||||||
|
|
||||||
|
static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
|
||||||
|
{
|
||||||
|
return readb(p->membase + (offset ^ 3));
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ioc3_serial_out(struct uart_port *p, int offset, int value)
|
||||||
|
{
|
||||||
|
writeb(value, p->membase + (offset ^ 3));
|
||||||
|
}
|
||||||
|
|
||||||
|
static int serial8250_ioc3_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct ioc3_8250_data *data;
|
||||||
|
struct uart_8250_port up;
|
||||||
|
struct resource *r;
|
||||||
|
void __iomem *membase;
|
||||||
|
int irq, line;
|
||||||
|
|
||||||
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||||
|
if (!r)
|
||||||
|
return -ENODEV;
|
||||||
|
|
||||||
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
||||||
|
if (!data)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
membase = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
|
||||||
|
if (!membase)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
irq = platform_get_irq(pdev, 0);
|
||||||
|
if (irq < 0)
|
||||||
|
irq = 0; /* no interrupt -> use polling */
|
||||||
|
|
||||||
|
/* Register serial ports with 8250.c */
|
||||||
|
memset(&up, 0, sizeof(struct uart_8250_port));
|
||||||
|
up.port.iotype = UPIO_MEM;
|
||||||
|
up.port.uartclk = IOC3_UARTCLK;
|
||||||
|
up.port.type = PORT_16550A;
|
||||||
|
up.port.irq = irq;
|
||||||
|
up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ);
|
||||||
|
up.port.dev = &pdev->dev;
|
||||||
|
up.port.membase = membase;
|
||||||
|
up.port.mapbase = r->start;
|
||||||
|
up.port.serial_in = ioc3_serial_in;
|
||||||
|
up.port.serial_out = ioc3_serial_out;
|
||||||
|
line = serial8250_register_8250_port(&up);
|
||||||
|
if (line < 0)
|
||||||
|
return line;
|
||||||
|
|
||||||
|
platform_set_drvdata(pdev, data);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int serial8250_ioc3_remove(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct ioc3_8250_data *data = platform_get_drvdata(pdev);
|
||||||
|
|
||||||
|
serial8250_unregister_port(data->line);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct platform_driver serial8250_ioc3_driver = {
|
||||||
|
.probe = serial8250_ioc3_probe,
|
||||||
|
.remove = serial8250_ioc3_remove,
|
||||||
|
.driver = {
|
||||||
|
.name = "ioc3-serial8250",
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(serial8250_ioc3_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
|
||||||
|
MODULE_DESCRIPTION("SGI IOC3 8250 UART driver");
|
||||||
|
MODULE_LICENSE("GPL");
|
@ -371,6 +371,17 @@ config SERIAL_8250_EM
|
|||||||
port hardware found on the Emma Mobile line of processors.
|
port hardware found on the Emma Mobile line of processors.
|
||||||
If unsure, say N.
|
If unsure, say N.
|
||||||
|
|
||||||
|
config SERIAL_8250_IOC3
|
||||||
|
tristate "SGI IOC3 8250 UART support"
|
||||||
|
depends on SGI_MFD_IOC3 && SERIAL_8250
|
||||||
|
select SERIAL_8250_EXTENDED
|
||||||
|
select SERIAL_8250_SHARE_IRQ
|
||||||
|
help
|
||||||
|
Enable this if you have a SGI Origin or Octane machine. This module
|
||||||
|
provides basic serial support by directly driving the UART chip
|
||||||
|
behind the IOC3 device on those systems. Maximum baud speed is
|
||||||
|
38400bps using this driver.
|
||||||
|
|
||||||
config SERIAL_8250_RT288X
|
config SERIAL_8250_RT288X
|
||||||
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
|
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
|
||||||
depends on SERIAL_8250
|
depends on SERIAL_8250
|
||||||
|
@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
|
|||||||
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
|
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
|
||||||
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
|
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
|
||||||
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
|
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
|
||||||
|
obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o
|
||||||
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
|
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
|
||||||
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
|
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
|
||||||
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
|
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
|
||||||
|
Loading…
Reference in New Issue
Block a user