based on exynos-dt-2 and s3c24xx-dt-2

- use #include for all Samsung DT - add clk for exynos audio subsystem (audss) and i2s - support audss and i2s for exynos5250 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRwKhvAAoJEA0Cl+kVi2xqI5oP/3CgQCOQiNt+rPH4OyJvKg+D ftZ5ZqXqdKTUtWdCqKqiO2Q6+AXeSr2ddiLO/dZAlwFZ3jfbefEgQ6IQbLNTFghz feDQy5NrxalO0s9nkbdQ34hudDIRI39/+53W9cySnrHooSURvqR3+zLhzSewM6qz fsivJKygq2TeXUobUDQr8HzajEIcSNCQzWOqu0JkTpe5AY+0QCpwKCFqHfTF9Ks9 9r6F9KO05EGuRwS66IGl0xvMiW5WWbFtM8RPEdRALyFBzsiHpltg9gTQq+ZBfodl If6a7gclS+GP3WHou9NAy8/5otwFKg/DRZxgXjoVrst/4RmpcqzCnyBdmB/dP//z ZyLIPXEAS1qv0SDTnbUA8qeW9/zrStV2nHHI5YoQq5L0J3zaSedKOeRq3m996jnw PRo3HYIjMic6afotmnisXr2bAX9OLcrLnsJ6hDMjC0wZgCMAhKqJxIf3qAh1K8Sg /oKyqihn/l8QbrubigcgGcwGXNb8HBEYHXgOXprVi7cJifpUaH5MOu7uBMEgQZkH TpxDmgiNiggB1KT/xI4GhCothGJPLxh75gp5+VvII4pHym0l8jJDafMPA9i+0W/q UML8CBLB+wfWq+gzc+OUbDQAkOWfQgAE1SuCxwK/BNanlu8ujRCuhQicuS3fNgBA 2ZDtOH6e4tsIiWgrnxz7 =0n6B -----END PGP SIGNATURE----- Merge tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim: based on exynos-dt-2 and s3c24xx-dt-2 - use #include for all Samsung DT - add clk for exynos audio subsystem (audss) and i2s - support audss and i2s for exynos5250 * tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-18 18:23:53 +08:00 · 2013-06-20 22:27:52 +02:00 · 2013-06-20 22:27:52 +02:00 · 0c6abd1f25
commit 0c6abd1f25
parent efe20b421f 79d743c177
28 changed files with 288 additions and 56 deletions
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@ -0,0 +1,64 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
+binding described here is applicable to all SoC's in Exynos family.
+
+Required Properties:
+
+- compatible: should be one of the following:
+  - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
+  - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
+
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+Provided clocks:
+
+Clock           ID      SoC (if specific)
+-----------------------------------------------
+
+mout_audss      0
+mout_i2s        1
+dout_srp        2
+dout_aud_bus    3
+dout_i2s        4
+srp_clk         5
+i2s_bus         6
+sclk_i2s        7
+pcm_bus         8
+sclk_pcm        9
+
+Example 1: An example of a clock controller node is listed below.
+
+clock_audss: audss-clock-controller@3810000 {
+	compatible = "samsung,exynos5250-audss-clock";
+	reg = <0x03810000 0x0C>;
+	#clock-cells = <1>;
+};
+
+Example 2: I2S controller node that consumes the clock generated by the clock
+           controller. Refer to the standard clock bindings for information
+           about 'clocks' and 'clock-names' property.
+
+i2s0: i2s@03830000 {
+	compatible = "samsung,i2s-v5";
+	reg = <0x03830000 0x100>;
+	dmas = <&pdma0 10
+		&pdma0 9
+		&pdma0 8>;
+	dma-names = "tx", "rx", "tx-sec";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_SCLK_I2S>,
+		<&clock_audss EXYNOS_MOUT_AUDSS>,
+		<&clock_audss EXYNOS_MOUT_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
+	"mout_audss", "mout_i2s";
+};
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@ -8,6 +8,16 @@ Required SoC Specific Properties:
 - dmas: list of DMA controller phandle and DMA request line ordered pairs.
 - dma-names: identifier string for each DMA request line in the dmas property.
  These strings correspond 1:1 with the ordered pairs in dmas.
+- clocks: Handle to iis clock and RCLK source clk.
+- clock-names:
+  i2s0 uses some base clks from CMU and some are from audio subsystem internal
+  clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and
+  "i2s_opclk1" as shown in the example below.
+  i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should
+  be "iis" and "i2s_opclk0".
+  "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root
+  clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2
+  doesn't have any such mux.

 Optional SoC Specific Properties:

@ -20,44 +30,26 @@ Optional SoC Specific Properties:
  then this flag is enabled.
 - samsung,idma-addr: Internal DMA register base address of the audio
  sub system(used in secondary sound source).
-
-Required Board Specific Properties:
-
- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK
-  interface lines. The format of the gpio specifier depends on the gpio
-  controller.
-  The syntax of samsung gpio specifier is
-	<[phandle of the gpio controller node]
-	 [pin number within the gpio controller]
-	 [mux function]
-	 [flags and pull up/down]
-	 [drive strength]>
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".

 Example:

- SoC Specific Portion:
-
-i2s@03830000 {
+i2s0: i2s@03830000 {
 	compatible = "samsung,i2s-v5";
 	reg = <0x03830000 0x100>;
 	dmas = <&pdma0 10
 		&pdma0 9
 		&pdma0 8>;
 	dma-names = "tx", "rx", "tx-sec";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_SCLK_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 	samsung,supports-6ch;
 	samsung,supports-rstclr;
 	samsung,supports-secdai;
 	samsung,idma-addr = <0x03000000>;
-};
-
- Board Specific Portion:
-
-i2s@03830000 {
-	gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */
-		<&gpz 1 2 0 0>, /* I2S_0_CDCLK */
-		<&gpz 2 2 0 0>, /* I2S_0_LRCK */
-		<&gpz 3 2 0 0>, /* I2S_0_SDI */
-		<&gpz 4 2 0 0>, /* I2S_0_SDO[1] */
-		<&gpz 5 2 0 0>, /* I2S_0_SDO[2] */
-		<&gpz 6 2 0 0>; /* I2S_0_SDO[3] */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_bus>;
 };
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@ -19,7 +19,7 @@
 * published by the Free Software Foundation.
 */

-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"

 / {
 	interrupt-parent = <&gic>;
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@ -15,7 +15,7 @@
 */

 /dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"

 / {
 	model = "Insignal Origen evaluation board based on Exynos4210";
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@ -15,7 +15,7 @@
 */

 /dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"

 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@ -13,7 +13,7 @@
 */

 /dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"

 / {
 	model = "Samsung Trats based on Exynos4210";
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@ -13,7 +13,7 @@
 */

 /dts-v1/;
-/include/ "exynos4210.dtsi"
+#include "exynos4210.dtsi"

 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@ -19,8 +19,8 @@
 * published by the Free Software Foundation.
 */

-/include/ "exynos4.dtsi"
-/include/ "exynos4210-pinctrl.dtsi"
+#include "exynos4.dtsi"
+#include "exynos4210-pinctrl.dtsi"

 / {
 	compatible = "samsung,exynos4210";
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@ -17,7 +17,7 @@
 * published by the Free Software Foundation.
 */

-/include/ "exynos4x12.dtsi"
+#include "exynos4x12.dtsi"

 / {
 	compatible = "samsung,exynos4212";
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@ -12,7 +12,7 @@
 */

 /dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"

 / {
 	model = "Hardkernel ODROID-X board based on Exynos4412";
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@ -13,7 +13,7 @@
 */

 /dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"

 / {
 	model = "Insignal Origen evaluation board based on Exynos4412";
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@ -13,7 +13,7 @@
 */

 /dts-v1/;
-/include/ "exynos4412.dtsi"
+#include "exynos4412.dtsi"

 / {
 	model = "Samsung SMDK evaluation board based on Exynos4412";
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@ -17,7 +17,7 @@
 * published by the Free Software Foundation.
 */

-/include/ "exynos4x12.dtsi"
+#include "exynos4x12.dtsi"

 / {
 	compatible = "samsung,exynos4412";
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@ -17,8 +17,8 @@
 * published by the Free Software Foundation.
 */

-/include/ "exynos4.dtsi"
-/include/ "exynos4x12-pinctrl.dtsi"
+#include "exynos4.dtsi"
+#include "exynos4x12-pinctrl.dtsi"

 / {
 	aliases {
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@ -10,7 +10,7 @@
 */

 /dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"

 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@ -10,7 +10,7 @@
 */

 /dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"

 / {
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@ -9,8 +9,8 @@
 */

 /dts-v1/;
-/include/ "exynos5250.dtsi"
-/include/ "cros5250-common.dtsi"
+#include "exynos5250.dtsi"
+#include "cros5250-common.dtsi"

 / {
 	model = "Google Snow";
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@ -17,8 +17,10 @@
 * published by the Free Software Foundation.
 */

-/include/ "skeleton.dtsi"
-/include/ "exynos5250-pinctrl.dtsi"
+#include "skeleton.dtsi"
+#include "exynos5250-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos-audss-clk.h>

 / {
 	compatible = "samsung,exynos5250";
@ -72,6 +74,12 @@
 		#clock-cells = <1>;
 	};

+	clock_audss: audss-clock-controller@3810000 {
+		compatible = "samsung,exynos5250-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@ -451,6 +459,10 @@
 			&pdma0 9
 			&pdma0 8>;
 		dma-names = "tx", "rx", "tx-sec";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_SCLK_I2S>;
+		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 		samsung,supports-6ch;
 		samsung,supports-rstclr;
 		samsung,supports-secdai;
@ -465,6 +477,8 @@
 		dmas = <&pdma1 12
 			&pdma1 11>;
 		dma-names = "tx", "rx";
+		clocks = <&clock 307>, <&clock 157>;
+		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
 	};
@ -475,6 +489,8 @@
 		dmas = <&pdma0 12
 			&pdma0 11>;
 		dma-names = "tx", "rx";
+		clocks = <&clock 308>, <&clock 158>;
+		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
 	};
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@ -10,7 +10,7 @@
 */

 /dts-v1/;
-/include/ "exynos5440.dtsi"
+#include "exynos5440.dtsi"

 / {
 	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@ -10,7 +10,7 @@
 */

 /dts-v1/;
-/include/ "exynos5440.dtsi"
+#include "exynos5440.dtsi"

 / {
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@ -9,7 +9,7 @@
 * published by the Free Software Foundation.
 */

-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"

 / {
 	compatible = "samsung,exynos5440";
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@ -9,7 +9,7 @@
 */

 /dts-v1/;
-/include/ "s3c2416.dtsi"
+#include "s3c2416.dtsi"

 / {
 	model = "SMDK2416";
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@ -8,8 +8,8 @@
 * published by the Free Software Foundation.
 */

-/include/ "s3c24xx.dtsi"
-/include/ "s3c2416-pinctrl.dtsi"
+#include "s3c24xx.dtsi"
+#include "s3c2416-pinctrl.dtsi"

 / {
 	model = "Samsung S3C2416 SoC";
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@ -8,7 +8,7 @@
 * published by the Free Software Foundation.
 */

-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"

 / {
 	compatible = "samsung,s3c24xx";
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Padmavathi Venna <padma.v@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Audio Subsystem Clock Controller.
+*/
+
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+static struct clk_onecell_data clk_data;
+
+#define ASS_CLK_SRC 0x0
+#define ASS_CLK_DIV 0x4
+#define ASS_CLK_GATE 0x8
+
+static unsigned long reg_save[][2] = {
+	{ASS_CLK_SRC,  0},
+	{ASS_CLK_DIV,  0},
+	{ASS_CLK_GATE, 0},
+};
+
+/* list of all parent clock list */
+static const char *mout_audss_p[] = { "fin_pll", "fout_epll" };
+static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" };
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_audss_clk_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+		reg_save[i][1] = readl(reg_base + reg_save[i][0]);
+
+	return 0;
+}
+
+static void exynos_audss_clk_resume(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+		writel(reg_save[i][1], reg_base + reg_save[i][0]);
+}
+
+static struct syscore_ops exynos_audss_clk_syscore_ops = {
+	.suspend	= exynos_audss_clk_suspend,
+	.resume		= exynos_audss_clk_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+/* register exynos_audss clocks */
+void __init exynos_audss_clk_init(struct device_node *np)
+{
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: failed to map audss registers\n", __func__);
+		return;
+	}
+
+	clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
+				GFP_KERNEL);
+	if (!clk_table) {
+		pr_err("%s: could not allocate clk lookup table\n", __func__);
+		return;
+	}
+
+	clk_data.clks = clk_table;
+	clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
+				mout_audss_p, ARRAY_SIZE(mout_audss_p), 0,
+				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
+
+	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
+				mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0,
+				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
+
+	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
+				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
+				0, &lock);
+
+	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
+				"dout_aud_bus", "dout_srp", 0,
+				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
+
+	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
+				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
+				&lock);
+
+	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
+				"dout_srp", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 0, 0, &lock);
+
+	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
+				"dout_aud_bus", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 2, 0, &lock);
+
+	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
+				"dout_i2s", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 3, 0, &lock);
+
+	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
+				 "sclk_pcm", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 4, 0, &lock);
+
+	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
+				"div_pcm0", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 5, 0, &lock);
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&exynos_audss_clk_syscore_ops);
+#endif
+
+	pr_info("Exynos: Audss: clock setup completed\n");
+}
+CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock",
+		exynos_audss_clk_init);
+CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock",
+		exynos_audss_clk_init);
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@ -87,6 +87,7 @@ enum exynos5250_clks {
 	sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3,
 	sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm,
 	sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+	div_i2s1, div_i2s2,

 	/* gate clocks */
 	gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0,
@ -291,8 +292,8 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8),
 	DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4),
 	DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8),
-	DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
-	DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
+	DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
+	DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
 	DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4),
 	DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"),
 	DIV_F(none, "div_mipi1_pre", "div_mipi1",
--- a/include/dt-bindings/clk/exynos-audss-clk.h
+++ b/include/dt-bindings/clk/exynos-audss-clk.h
@ -0,0 +1,25 @@
+/*
+ * This header provides constants for Samsung audio subsystem
+ * clock controller.
+ *
+ * The constants defined in this header are being used in dts
+ * and exynos audss driver.
+ */
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+
+#define EXYNOS_MOUT_AUDSS	0
+#define EXYNOS_MOUT_I2S	1
+#define EXYNOS_DOUT_SRP	2
+#define EXYNOS_DOUT_AUD_BUS	3
+#define EXYNOS_DOUT_I2S	4
+#define EXYNOS_SRP_CLK		5
+#define EXYNOS_I2S_BUS		6
+#define EXYNOS_SCLK_I2S	7
+#define EXYNOS_PCM_BUS		8
+#define EXYNOS_SCLK_PCM	9
+
+#define EXYNOS_AUDSS_MAX_CLKS	10
+
+#endif