renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code

mmc: msm_sdcc: Check for only DATA_END interrupt to end a request

Browse Source 
The current code checks for both DATA_END and DATA_BLK_END bits in
MCI_STATUS register and ends a request only if both are set at a time.
The hardware doesn't always set DATA_BLK_END when DATA_END is set.
But DATA_END status itself is sufficient condition from hardware that
data transfer is done and hence, check for only DATA_END interrupt in
software to end a request.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
This commit is contained in:
Sahitya Tummala 2010-12-08 15:03:07 +05:30 committed by David Brown
parent 71dd9106af
commit 0c521ccbd0
2 changed files with 4 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/mmc/host/msm_sdcc.c
View File

@ -190,7 +190,7 @@ static void
msmsdcc_stop_data(struct msmsdcc_host *host)
{
host->curr.data = NULL;
host->curr.got_dataend = host->curr.got_datablkend = 0;
host->curr.got_dataend = 0;
}
uint32_t msmsdcc_fifo_addr(struct msmsdcc_host *host)
@ -277,8 +277,7 @@ msmsdcc_dma_complete_tlet(unsigned long data)
host->dma.sg = NULL;
host->dma.busy = 0;
if ((host->curr.got_dataend && host->curr.got_datablkend)
|| mrq->data->error) {
if (host->curr.got_dataend || mrq->data->error) {
/*
* If we've already gotten our DATAEND / DATABLKEND
@ -506,7 +505,6 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data,
host->curr.xfer_remain = host->curr.xfer_size;
host->curr.data_xfered = 0;
host->curr.got_dataend = 0;
host->curr.got_datablkend = 0;
memset(&host->pio, 0, sizeof(host->pio));
@ -827,14 +825,10 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status,
if (!host->curr.got_dataend && (status & MCI_DATAEND))
host->curr.got_dataend = 1;
if (!host->curr.got_datablkend && (status & MCI_DATABLOCKEND))
host->curr.got_datablkend = 1;
/*
* If DMA is still in progress, we complete via the completion handler
*/
if (host->curr.got_dataend && host->curr.got_datablkend &&
!host->dma.busy) {
if (host->curr.got_dataend && !host->dma.busy) {
/*
* There appears to be an issue in the controller where
* if you request a small block transfer (< fifo size),
@ -871,8 +865,7 @@ msmsdcc_irq(int irq, void *dev_id)
do {
status = msmsdcc_readl(host, MMCISTATUS);
status &= (msmsdcc_readl(host, MMCIMASK0) |
MCI_DATABLOCKENDMASK);
status &= msmsdcc_readl(host, MMCIMASK0);
msmsdcc_writel(host, status, MMCICLEAR);
if (status & MCI_SDIOINTR)

1
drivers/mmc/host/msm_sdcc.h
View File

@ -190,7 +190,6 @@ struct msmsdcc_curr_req {
unsigned int xfer_remain; /* Bytes remaining to send */
unsigned int data_xfered; /* Bytes acked by BLKEND irq */
int got_dataend;
int got_datablkend;
int user_pages;
};