2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 13:43:55 +08:00

net: nixge: Update device-tree bindings with v3.00

Now the DMA engine is free to float elsewhere in the system map.

Signed-off-by: Alex Williams <alex.williams@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Alex Williams 2019-01-31 13:33:28 -08:00 committed by David S. Miller
parent 87ab207981
commit 0bb16830eb

View File

@ -1,8 +1,14 @@
* NI XGE Ethernet controller
Required properties:
- compatible: Should be "ni,xge-enet-2.00"
- reg: Address and length of the register set for the device
- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
older device trees with DMA engines co-located in the address map,
with the one reg entry to describe the whole device.
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names.
- reg-names: Should contain the reg names
"dma": DMA engine control and status region
"ctrl": MDIO and PHY control and status region
- interrupts: Should contain tx and rx interrupt
- interrupt-names: Should be "rx" and "tx"
- phy-mode: See ethernet.txt file in the same directory.
@ -12,8 +18,10 @@ Required properties:
Examples (10G generic PHY):
nixge0: ethernet@40000000 {
compatible = "ni,xge-enet-2.00";
reg = <0x40000000 0x6000>;
compatible = "ni,xge-enet-3.00";
reg = <0x40000000 0x4000
0x41002000 0x2000>;
reg-names = "dma", "ctrl";
nvmem-cells = <&eth1_addr>;
nvmem-cell-names = "address";