mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 01:04:08 +08:00
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
Convert ASPEED pinctrl bindings to DT schema format using json-schema. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Andrew Jeffery
Linus Walleij
parent
07457937bb
commit
0a617de167
@ -1,119 +0,0 @@
|
||||
=============================
|
||||
Aspeed AST2500 Pin Controller
|
||||
=============================
|
||||
|
||||
Required properties for g5:
|
||||
- compatible : Should be one of the following:
|
||||
"aspeed,ast2500-pinctrl"
|
||||
"aspeed,g5-pinctrl"
|
||||
|
||||
- aspeed,external-nodes: A cell of phandles to external controller nodes:
|
||||
0: compatible with "aspeed,ast2500-gfx", "syscon"
|
||||
1: compatible with "aspeed,ast2500-lhc", "syscon"
|
||||
|
||||
The pin controller node should be the child of a syscon node with the required
|
||||
property:
|
||||
|
||||
- compatible : Should be one of the following:
|
||||
"aspeed,ast2500-scu", "syscon", "simple-mfd"
|
||||
"aspeed,g5-scu", "syscon", "simple-mfd"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.txt
|
||||
|
||||
Subnode Format
|
||||
==============
|
||||
|
||||
The required properties of pinmux child nodes are:
|
||||
- function: the mux function to select
|
||||
- groups : the list of groups to select with this function
|
||||
|
||||
Required properties of pinconf child nodes are:
|
||||
- groups: A list of groups to select (either this or "pins" must be
|
||||
specified)
|
||||
- pins : A list of ball names as strings, eg "D14" (either this or "groups"
|
||||
must be specified)
|
||||
|
||||
Optional properties of pinconf child nodes are:
|
||||
- bias-disable : disable any pin bias
|
||||
- bias-pull-down: pull down the pin
|
||||
- drive-strength: sink or source at most X mA
|
||||
|
||||
Definitions are as specified in
|
||||
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any
|
||||
further limitations as described above.
|
||||
|
||||
For pinmux, each mux function has only one associated pin group. Each group is
|
||||
named by its function. The following values for the function and groups
|
||||
properties are supported:
|
||||
|
||||
ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
|
||||
ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
|
||||
GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
|
||||
I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME
|
||||
LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1
|
||||
NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2
|
||||
NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4
|
||||
PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10
|
||||
SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9
|
||||
SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPM SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ
|
||||
SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0
|
||||
SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
|
||||
TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS
|
||||
VGAVS VPI24 VPO WDTRST1 WDTRST2
|
||||
|
||||
Example
|
||||
=======
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
syscon: scu@1e6e2000 {
|
||||
compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
|
||||
reg = <0x1e6e2000 0x1a8>;
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g5-pinctrl";
|
||||
aspeed,external-nodes = <&gfx &lhc>;
|
||||
|
||||
pinctrl_i2c3_default: i2c3_default {
|
||||
function = "I2C3";
|
||||
groups = "I2C3";
|
||||
};
|
||||
|
||||
pinctrl_gpioh0_unbiased_default: gpioh0 {
|
||||
pins = "A18";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gfx: display@1e6e6000 {
|
||||
compatible = "aspeed,ast2500-gfx", "syscon";
|
||||
reg = <0x1e6e6000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
lpc: lpc@1e789000 {
|
||||
compatible = "aspeed,ast2500-lpc", "simple-mfd";
|
||||
reg = <0x1e789000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x1e789000 0x1000>;
|
||||
|
||||
lpc_host: lpc-host@80 {
|
||||
compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
|
||||
reg = <0x80 0x1e0>;
|
||||
reg-io-width = <4>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x80 0x1e0>;
|
||||
|
||||
lhc: lhc@20 {
|
||||
compatible = "aspeed,ast2500-lhc";
|
||||
reg = <0x20 0x24 0x48 0x8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,134 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2500-pinctrl.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ASPEED AST2500 Pin Controller
|
||||
|
||||
maintainers:
|
||||
- Andrew Jeffery <andrew@aj.id.au>
|
||||
|
||||
description: |+
|
||||
The pin controller node should be the child of a syscon node with the
|
||||
required property:
|
||||
|
||||
- compatible: Should be one of the following:
|
||||
"aspeed,ast2500-scu", "syscon", "simple-mfd"
|
||||
"aspeed,g5-scu", "syscon", "simple-mfd"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.txt
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum: [ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl ]
|
||||
aspeed,external-nodes:
|
||||
minItems: 2
|
||||
maxItems: 2
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: |
|
||||
A cell of phandles to external controller nodes:
|
||||
0: compatible with "aspeed,ast2500-gfx", "syscon"
|
||||
1: compatible with "aspeed,ast2500-lhc", "syscon"
|
||||
|
||||
patternProperties:
|
||||
'^.*$':
|
||||
if:
|
||||
type: object
|
||||
then:
|
||||
patternProperties:
|
||||
"^function|groups$":
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/string"
|
||||
- enum: [ "ACPI", "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13",
|
||||
"ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7",
|
||||
"ADC8", "ADC9", "BMCINT", "DDCCLK", "DDCDAT", "ESPI", "FWSPICS1",
|
||||
"FWSPICS2", "GPID0", "GPID2", "GPID4", "GPID6", "GPIE0", "GPIE2",
|
||||
"GPIE4", "GPIE6", "I2C10", "I2C11", "I2C12", "I2C13", "I2C14",
|
||||
"I2C3", "I2C4", "I2C5", "I2C6", "I2C7", "I2C8", "I2C9", "LAD0",
|
||||
"LAD1", "LAD2", "LAD3", "LCLK", "LFRAME", "LPCHC", "LPCPD",
|
||||
"LPCPLUS", "LPCPME", "LPCRST", "LPCSMI", "LSIRQ", "MAC1LINK",
|
||||
"MAC2LINK", "MDIO1", "MDIO2", "NCTS1", "NCTS2", "NCTS3", "NCTS4",
|
||||
"NDCD1", "NDCD2", "NDCD3", "NDCD4", "NDSR1", "NDSR2", "NDSR3",
|
||||
"NDSR4", "NDTR1", "NDTR2", "NDTR3", "NDTR4", "NRI1", "NRI2",
|
||||
"NRI3", "NRI4", "NRTS1", "NRTS2", "NRTS3", "NRTS4", "OSCCLK",
|
||||
"PEWAKE", "PNOR", "PWM0", "PWM1", "PWM2", "PWM3", "PWM4", "PWM5",
|
||||
"PWM6", "PWM7", "RGMII1", "RGMII2", "RMII1", "RMII2", "RXD1",
|
||||
"RXD2", "RXD3", "RXD4", "SALT1", "SALT10", "SALT11", "SALT12",
|
||||
"SALT13", "SALT14", "SALT2", "SALT3", "SALT4", "SALT5", "SALT6",
|
||||
"SALT7", "SALT8", "SALT9", "SCL1", "SCL2", "SD1", "SD2", "SDA1",
|
||||
"SDA2", "SGPS1", "SGPS2", "SIOONCTRL", "SIOPBI", "SIOPBO",
|
||||
"SIOPWREQ", "SIOPWRGD", "SIOS3", "SIOS5", "SIOSCI", "SPI1",
|
||||
"SPI1CS1", "SPI1DEBUG", "SPI1PASSTHRU", "SPI2CK", "SPI2CS0",
|
||||
"SPI2CS1", "SPI2MISO", "SPI2MOSI", "TIMER3", "TIMER4", "TIMER5",
|
||||
"TIMER6", "TIMER7", "TIMER8", "TXD1", "TXD2", "TXD3", "TXD4",
|
||||
"UART6", "USB11BHID", "USB2AD", "USB2AH", "USB2BD", "USB2BH",
|
||||
"USBCKI", "VGABIOSROM", "VGAHS", "VGAVS", "VPI24", "VPO",
|
||||
"WDTRST1", "WDTRST2", ]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- aspeed,external-nodes
|
||||
|
||||
examples:
|
||||
- |
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
|
||||
apb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
syscon: scu@1e6e2000 {
|
||||
compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
|
||||
reg = <0x1e6e2000 0x1a8>;
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g5-pinctrl";
|
||||
aspeed,external-nodes = <&gfx &lhc>;
|
||||
|
||||
pinctrl_i2c3_default: i2c3_default {
|
||||
function = "I2C3";
|
||||
groups = "I2C3";
|
||||
};
|
||||
|
||||
pinctrl_gpioh0_unbiased_default: gpioh0 {
|
||||
pins = "A18";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gfx: display@1e6e6000 {
|
||||
compatible = "aspeed,ast2500-gfx", "syscon";
|
||||
reg = <0x1e6e6000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
lpc: lpc@1e789000 {
|
||||
compatible = "aspeed,ast2500-lpc", "simple-mfd";
|
||||
reg = <0x1e789000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x1e789000 0x1000>;
|
||||
|
||||
lpc_host: lpc-host@80 {
|
||||
compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
|
||||
reg = <0x80 0x1e0>;
|
||||
reg-io-width = <4>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x80 0x1e0>;
|
||||
|
||||
lhc: lhc@20 {
|
||||
compatible = "aspeed,ast2500-lhc";
|
||||
reg = <0x20 0x24 0x48 0x8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user