renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
Code

ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor

Browse Source 
Don't request MODEM IRQ GPIO by its global number in
ams_delta_modem_init().  Instead, obtain its GPIO descriptor
and assign related IRQ to the MODEM.  Do that from
omap_gpio_deps_init(), where the chip is already looked up.  Then, in
ams_delta_modem_init(), just check for the IRQ number having been
already assigned.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Janusz Krzysztofik 2018-09-10 01:44:17 +02:00 committed by Tony Lindgren
parent 5b394b2ddf
commit 0812db9437
1 changed files with 35 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -630,6 +630,28 @@ static struct gpiod_hog ams_delta_gpio_hogs[] = {
{},
};
static struct plat_serial8250_port ams_delta_modem_ports[];
/*
* Obtain MODEM IRQ GPIO descriptor using its hardware pin
* number and assign related IRQ number to the MODEM port.
* Keep the GPIO descriptor open so nobody steps in.
*/
static void __init modem_assign_irq(struct gpio_chip *chip)
{
struct gpio_desc *gpiod;
gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ,
"modem_irq");
if (IS_ERR(gpiod)) {
pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__,
PTR_ERR(gpiod));
} else {
gpiod_direction_input(gpiod);
ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod);
}
}
/*
* The purpose of this function is to take care of proper initialization of
* devices and data structures which depend on GPIO lines provided by OMAP GPIO
@ -649,7 +671,13 @@ static void __init omap_gpio_deps_init(void)
return;
}
/*
* Start with FIQ initialization as it may have to request
* and release successfully each OMAP GPIO pin in turn.
*/
ams_delta_init_fiq(chip, &ams_delta_serio_device);
modem_assign_irq(chip);
}
static void __init ams_delta_init(void)
@ -844,20 +872,18 @@ static int __init modem_nreset_init(void)
}
/*
* This function expects MODEM IRQ number already assigned to the port
* and fails if it's not.
*/
static int __init ams_delta_modem_init(void)
{
int err;
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
if (ams_delta_modem_ports[0].irq < 0)
return ams_delta_modem_ports[0].irq;
err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
if (err) {
pr_err("Couldn't request gpio pin for modem\n");
return err;
}
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
omap_cfg_reg(M14_1510_GPIO2);
/* Initialize the modem_nreset regulator consumer before use */
modem_priv.regulator = ERR_PTR(-ENODEV);
@ -866,8 +892,6 @@ static int __init ams_delta_modem_init(void)
AMS_DELTA_LATCH2_MODEM_CODEC);
err = platform_device_register(&ams_delta_modem_device);
if (err)
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
@ -898,7 +922,6 @@ static int __init late_init(void)
unregister:
platform_device_unregister(&ams_delta_modem_device);
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}