2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00

hpsa: trivial message and comment clean ups

Cleanup comments to be more specific. Make messages more
informational.

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This commit is contained in:
Stephen Cameron 2015-01-23 16:42:22 -06:00 committed by James Bottomley
parent c7ee65b384
commit 050f71471d

View File

@ -5863,8 +5863,8 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
} else {
use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
if (use_doorbell) {
dev_warn(&pdev->dev, "Soft reset not supported. "
"Firmware update is required.\n");
dev_warn(&pdev->dev,
"Soft reset not supported. Firmware update is required.\n");
rc = -ENOTSUPP; /* try soft reset */
goto unmap_cfgtable;
}
@ -5884,8 +5884,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
if (rc) {
dev_warn(&pdev->dev,
"failed waiting for board to become ready "
"after hard reset\n");
"Failed waiting for board to become ready after hard reset\n");
goto unmap_cfgtable;
}
@ -5984,7 +5983,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
}
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
* controllers that are capable. If not, we use IO-APIC mode.
* controllers that are capable. If not, we use legacy INTx mode.
*/
static void hpsa_interrupt_mode(struct ctlr_info *h)
@ -6003,7 +6002,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
(h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
goto default_int_mode;
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
dev_info(&h->pdev->dev, "MSIX\n");
dev_info(&h->pdev->dev, "MSI-X capable controller\n");
h->msix_vector = MAX_REPLY_QUEUES;
if (h->msix_vector > num_online_cpus())
h->msix_vector = num_online_cpus();
@ -6024,7 +6023,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
}
single_msi_mode:
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
dev_info(&h->pdev->dev, "MSI\n");
dev_info(&h->pdev->dev, "MSI capable controller\n");
if (!pci_enable_msi(h->pdev))
h->msi_vector = 1;
else
@ -6209,7 +6208,7 @@ static void hpsa_find_board_params(struct ctlr_info *h)
static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
{
if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
dev_err(&h->pdev->dev, "not a valid CISS config table\n");
return false;
}
return true;
@ -6301,7 +6300,7 @@ static int hpsa_enter_simple_mode(struct ctlr_info *h)
h->transMethod = CFGTBL_Trans_Simple;
return 0;
error:
dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
dev_err(&h->pdev->dev, "failed to enter simple mode\n");
return -ENODEV;
}
@ -7282,8 +7281,8 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
hpsa_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant)) {
dev_warn(&h->pdev->dev, "unable to get board into"
" performant mode\n");
dev_err(&h->pdev->dev,
"performant mode problem - transport not active\n");
return;
}
/* Change the access methods to the performant access methods */