renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Code

net: phy: add marvell usb to mdio controller

Browse Source 
An MDIO controller present on development boards for Marvell switches
from the Link Street (88E6xxx) family.

Using this module, you can use the following setup as a development
platform for switchdev and DSA related work.

   .-------.      .-----------------.
   |      USB----USB                |
   |  SoC  |      |  88E6390X-DB  ETH1-10
   |      ETH----ETH0               |
   '-------'      '-----------------'

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Tobias Waldekranz 2020-03-23 11:14:14 +01:00 committed by David S. Miller
parent 61e0150cb4
commit 04e37d92fb
4 changed files with 129 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
MAINTAINERS
View File

@ -10110,6 +10110,7 @@ MARVELL USB MDIO CONTROLLER DRIVER
M: Tobias Waldekranz <tobias@waldekranz.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/phy/mdio-mvusb.c
F: Documentation/devicetree/bindings/net/marvell,mvusb.yaml
MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER

7
drivers/net/phy/Kconfig
View File

@ -179,6 +179,13 @@ config MDIO_MSCC_MIIM
This driver supports the MIIM (MDIO) interface found in the network
switches of the Microsemi SoCs
config MDIO_MVUSB
tristate "Marvell USB to MDIO Adapter"
depends on USB
help
A USB to MDIO converter present on development boards for
Marvell's Link Street family of Ethernet switches.
config MDIO_OCTEON
tristate "Octeon and some ThunderX SOCs MDIO buses"
depends on (64BIT && OF_MDIO) || COMPILE_TEST

1
drivers/net/phy/Makefile
View File

@ -40,6 +40,7 @@ obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_MVUSB) += mdio-mvusb.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o

120
drivers/net/phy/mdio-mvusb.c Normal file
View File

@ -0,0 +1,120 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/usb.h>
#define USB_MARVELL_VID 0x1286
static const struct usb_device_id mvusb_mdio_table[] = {
{ USB_DEVICE(USB_MARVELL_VID, 0x1fa4) },
{}
};
MODULE_DEVICE_TABLE(usb, mvusb_mdio_table);
enum {
MVUSB_CMD_PREAMBLE0,
MVUSB_CMD_PREAMBLE1,
MVUSB_CMD_ADDR,
MVUSB_CMD_VAL,
};
struct mvusb_mdio {
struct usb_device *udev;
struct mii_bus *mdio;
__le16 buf[4];
};
static int mvusb_mdio_read(struct mii_bus *mdio, int dev, int reg)
{
struct mvusb_mdio *mvusb = mdio->priv;
int err, alen;
if (dev & MII_ADDR_C45)
return -EOPNOTSUPP;
mvusb->buf[MVUSB_CMD_ADDR] = cpu_to_le16(0xa400 | (dev << 5) | reg);
err = usb_bulk_msg(mvusb->udev, usb_sndbulkpipe(mvusb->udev, 2),
mvusb->buf, 6, &alen, 100);
if (err)
return err;
err = usb_bulk_msg(mvusb->udev, usb_rcvbulkpipe(mvusb->udev, 6),
&mvusb->buf[MVUSB_CMD_VAL], 2, &alen, 100);
if (err)
return err;
return le16_to_cpu(mvusb->buf[MVUSB_CMD_VAL]);
}
static int mvusb_mdio_write(struct mii_bus *mdio, int dev, int reg, u16 val)
{
struct mvusb_mdio *mvusb = mdio->priv;
int alen;
if (dev & MII_ADDR_C45)
return -EOPNOTSUPP;
mvusb->buf[MVUSB_CMD_ADDR] = cpu_to_le16(0x8000 | (dev << 5) | reg);
mvusb->buf[MVUSB_CMD_VAL] = cpu_to_le16(val);
return usb_bulk_msg(mvusb->udev, usb_sndbulkpipe(mvusb->udev, 2),
mvusb->buf, 8, &alen, 100);
}
static int mvusb_mdio_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct device *dev = &interface->dev;
struct mvusb_mdio *mvusb;
struct mii_bus *mdio;
mdio = devm_mdiobus_alloc_size(dev, sizeof(*mvusb));
if (!mdio)
return -ENOMEM;
mvusb = mdio->priv;
mvusb->mdio = mdio;
mvusb->udev = usb_get_dev(interface_to_usbdev(interface));
/* Reversed from USB PCAPs, no idea what these mean. */
mvusb->buf[MVUSB_CMD_PREAMBLE0] = cpu_to_le16(0xe800);
mvusb->buf[MVUSB_CMD_PREAMBLE1] = cpu_to_le16(0x0001);
snprintf(mdio->id, MII_BUS_ID_SIZE, "mvusb-%s", dev_name(dev));
mdio->name = mdio->id;
mdio->parent = dev;
mdio->read = mvusb_mdio_read;
mdio->write = mvusb_mdio_write;
usb_set_intfdata(interface, mvusb);
return of_mdiobus_register(mdio, dev->of_node);
}
static void mvusb_mdio_disconnect(struct usb_interface *interface)
{
struct mvusb_mdio *mvusb = usb_get_intfdata(interface);
struct usb_device *udev = mvusb->udev;
mdiobus_unregister(mvusb->mdio);
usb_set_intfdata(interface, NULL);
usb_put_dev(udev);
}
static struct usb_driver mvusb_mdio_driver = {
.name = "mvusb_mdio",
.id_table = mvusb_mdio_table,
.probe = mvusb_mdio_probe,
.disconnect = mvusb_mdio_disconnect,
};
module_usb_driver(mvusb_mdio_driver);
MODULE_AUTHOR("Tobias Waldekranz <tobias@waldekranz.com>");
MODULE_DESCRIPTION("Marvell USB MDIO Adapter");
MODULE_LICENSE("GPL");