mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
ASoC: codecs: adau1701: add DT bindings
Apart from pure matching, the bindings also support setting the the reset gpio line. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
47f5b692e0
commit
04561eacaa
23
Documentation/devicetree/bindings/sound/adi,adau1701.txt
Normal file
23
Documentation/devicetree/bindings/sound/adi,adau1701.txt
Normal file
@ -0,0 +1,23 @@
|
||||
Analog Devices ADAU1701
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should contain "adi,adau1701"
|
||||
- reg: The i2c address. Value depends on the state of ADDR0
|
||||
and ADDR1, as wired in hardware.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- reset-gpio: A GPIO spec to define which pin is connected to the
|
||||
chip's !RESET pin. If specified, the driver will
|
||||
assert a hardware reset at probe time.
|
||||
|
||||
Examples:
|
||||
|
||||
i2c_bus {
|
||||
adau1701@34 {
|
||||
compatible = "adi,adau1701";
|
||||
reg = <0x34>;
|
||||
reset-gpio = <&gpio 23 0>;
|
||||
};
|
||||
};
|
@ -13,6 +13,9 @@
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <sound/core.h>
|
||||
#include <sound/pcm.h>
|
||||
#include <sound/pcm_params.h>
|
||||
@ -452,6 +455,14 @@ static struct snd_soc_dai_driver adau1701_dai = {
|
||||
.symmetric_rates = 1,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id adau1701_dt_ids[] = {
|
||||
{ .compatible = "adi,adau1701", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, adau1701_dt_ids);
|
||||
#endif
|
||||
|
||||
static int adau1701_probe(struct snd_soc_codec *codec)
|
||||
{
|
||||
int ret;
|
||||
@ -494,12 +505,33 @@ static int adau1701_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct adau1701 *adau1701;
|
||||
struct device *dev = &client->dev;
|
||||
int gpio_nreset = -EINVAL;
|
||||
int ret;
|
||||
|
||||
adau1701 = devm_kzalloc(&client->dev, sizeof(*adau1701), GFP_KERNEL);
|
||||
adau1701 = devm_kzalloc(dev, sizeof(*adau1701), GFP_KERNEL);
|
||||
if (!adau1701)
|
||||
return -ENOMEM;
|
||||
|
||||
if (dev->of_node) {
|
||||
gpio_nreset = of_get_named_gpio(dev->of_node, "reset-gpio", 0);
|
||||
if (gpio_nreset < 0 && gpio_nreset != -ENOENT)
|
||||
return gpio_nreset;
|
||||
}
|
||||
|
||||
if (gpio_is_valid(gpio_nreset)) {
|
||||
ret = devm_gpio_request_one(dev, gpio_nreset, GPIOF_OUT_INIT_LOW,
|
||||
"ADAU1701 Reset");
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* minimum reset time is 20ns */
|
||||
udelay(1);
|
||||
gpio_set_value(gpio_nreset, 1);
|
||||
/* power-up time may be as long as 85ms */
|
||||
mdelay(85);
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, adau1701);
|
||||
ret = snd_soc_register_codec(&client->dev, &adau1701_codec_drv,
|
||||
&adau1701_dai, 1);
|
||||
@ -522,6 +554,7 @@ static struct i2c_driver adau1701_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "adau1701",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(adau1701_dt_ids),
|
||||
},
|
||||
.probe = adau1701_i2c_probe,
|
||||
.remove = adau1701_i2c_remove,
|
||||
|
Loading…
Reference in New Issue
Block a user