From 9001d80df9b1db946ef5d0fb52c974d74c567b86 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 25 Sep 2010 05:50:43 -0500 Subject: [PATCH 01/28] usb: musb: gadget: fix dma mode 0 in double buffer Rx case 1, In Rx double buffer case, FIFO may have two packets, so rxstate should be called to unload fifo if RXPKTRDY is set even the current request has not been completed. 2, Commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85 introduces autoclear to support double buffer in dma mode 0, so remove clearing RXPKTRDY manually for dma mode 0. 3, Commit c7af6b29ffeffbeb28caf39e5b2ce29b11807c7d may break dma mode 1 for non-doublebuffer endpoint, fix it. With this patch, either usbtest #5 or g_file_storage(writing file to device in usb host) or g_ether have been tested OK in double buffer case(using fifo mode 3). Also, this patch has been verified that single buffer case can't be broken. Cc: David Brownell Cc: Anand Gadiyar Cc: Mike Frysinger Cc: Sergei Shtylyov Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 5d815049cbaa..ce31f079b31e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -644,10 +644,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) */ csr |= MUSB_RXCSR_DMAENAB; - if (!musb_ep->hb_mult && - musb_ep->hw_ep->rx_double_buffered) - csr |= MUSB_RXCSR_AUTOCLEAR; #ifdef USE_MODE1 + csr |= MUSB_RXCSR_AUTOCLEAR; /* csr |= MUSB_RXCSR_DMAMODE; */ /* this special sequence (enabling and then @@ -656,6 +654,10 @@ static void rxstate(struct musb *musb, struct musb_request *req) */ musb_writew(epio, MUSB_RXCSR, csr | MUSB_RXCSR_DMAMODE); +#else + if (!musb_ep->hb_mult && + musb_ep->hw_ep->rx_double_buffered) + csr |= MUSB_RXCSR_AUTOCLEAR; #endif musb_writew(epio, MUSB_RXCSR, csr); @@ -807,7 +809,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) /* Autoclear doesn't clear RxPktRdy for short packets */ - if ((dma->desired_mode == 0) + if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered) || (dma->actual_len & (musb_ep->packet_sz - 1))) { /* ack the read! */ @@ -818,8 +820,16 @@ void musb_g_rx(struct musb *musb, u8 epnum) /* incomplete, and not short? wait for next IN packet */ if ((request->actual < request->length) && (musb_ep->dma->actual_len - == musb_ep->packet_sz)) + == musb_ep->packet_sz)) { + /* In double buffer case, continue to unload fifo if + * there is Rx packet in FIFO. + **/ + csr = musb_readw(epio, MUSB_RXCSR); + if ((csr & MUSB_RXCSR_RXPKTRDY) && + hw_ep->rx_double_buffered) + goto exit; return; + } #endif musb_g_giveback(musb_ep, request, 0); @@ -827,7 +837,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) if (!request) return; } - +exit: /* Analyze request */ rxstate(musb, to_musb_request(request)); } From e2c3404523c5366c6cc1099d3237d363254adde0 Mon Sep 17 00:00:00 2001 From: Rahul Ruikar Date: Sat, 2 Oct 2010 01:35:48 -0500 Subject: [PATCH 02/28] usb: musb: musb_gadget: fix resource leakage in error path In function musb_gadget_setup() call put_device() when device_register() fails. Signed-off-by: Rahul Ruikar Acked-by: Ming Lei Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ce31f079b31e..ba22e4a20f95 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1705,8 +1705,10 @@ int __init musb_gadget_setup(struct musb *musb) musb_platform_try_idle(musb, 0); status = device_register(&musb->g.dev); - if (status != 0) + if (status != 0) { + put_device(&musb->g.dev); the_gadget = NULL; + } return status; } From 120d074c58172cd44887d86c9acc44882818c7e7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 10 Oct 2010 13:52:22 -0500 Subject: [PATCH 03/28] usb: musb: don't leave PHY enabled on shutdown() Some actions like musb_platform_exit are only performed on module removal and not on shutdown, which results in PHY being left enabled on reboot at least. This is sometimes causing strange failures after reboot (observed on OMAP3 pandora board), when DEVCTL does not report VBUS state correctly due to unknown reasons (possibly because of communication issues between musb IP and PHY). Running musb_platform_exit before reset seems to resolve that issue. Move some exit code from musb_remove() to musb_shutdown() so that it is performed on both module removal and shutdown/reset. Also convert the host check so that it doesn't need #ifdef. Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c9f9024c5515..2f42a5d50a5a 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1052,6 +1052,12 @@ static void musb_shutdown(struct platform_device *pdev) clk_put(musb->clock); spin_unlock_irqrestore(&musb->lock, flags); + if (!is_otg_enabled(musb) && is_host_enabled(musb)) + usb_remove_hcd(musb_to_hcd(musb)); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_platform_exit(musb); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + /* FIXME power down */ } @@ -2244,13 +2250,6 @@ static int __exit musb_remove(struct platform_device *pdev) */ musb_exit_debugfs(musb); musb_shutdown(pdev); -#ifdef CONFIG_USB_MUSB_HDRC_HCD - if (musb->board_mode == MUSB_HOST) - usb_remove_hcd(musb_to_hcd(musb)); -#endif - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - musb_platform_exit(musb); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_free(musb); iounmap(ctrl_base); From 31c9909b512aa4c97cffc40627c255070fe0bc78 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Oct 2010 19:08:25 -0500 Subject: [PATCH 04/28] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration Commit 9f445cb29918dc488b7a9a92ef018599cce33df7[USB: musb: disable double buffering for older RTL versions] tries to disable double buffer mode by writing endpoint hw max packet size to TXMAP/RXMAP. First the approach can break full speed and cause overflow problems. We should always set those registers with the actual max packet size from endpoint descriptor. Second, the problem describe by commit 9f445cb29918dc488b7a9a92ef018599cce33df7 was caused by musb gadget driver; nothing to do with RTL revision as originaly suspected. The real fix to the problem is to always use actual max packet size from endpoint descriptor to config TXMAP/RXMAP registers. Cc: Cliff Cai Cc: David Brownell Cc: Anand Gadiyar Cc: Mike Frysinger Cc: Sergei Shtylyov Cc: stable@kernel.org Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ba22e4a20f95..f37b8594edeb 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -926,13 +926,9 @@ static int musb_gadget_enable(struct usb_ep *ep, * likewise high bandwidth periodic tx */ /* Set TXMAXP with the FIFO size of the endpoint - * to disable double buffering mode. Currently, It seems that double - * buffering has problem if musb RTL revision number < 2.0. + * to disable double buffering mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) - musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - else - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -968,10 +964,7 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) - musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx); - else - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { From 5d726f5add3af537952f7c35fdaebab43b718c2d Mon Sep 17 00:00:00 2001 From: Ian Jeffray Date: Sat, 23 Oct 2010 05:11:56 -0500 Subject: [PATCH 05/28] USB: musb: blackfin: fix musb_read_txhubport() definition The new MUSB power code needs musb_read_txhubport() to return a value (so stub it as 0 like the other Blackfin hub funcs). Signed-off-by: Ian Jeffray Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_regs.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 244267527a60..5a727c5b8676 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -633,8 +633,9 @@ static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) return 0; } -static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) { + return 0; } #endif /* CONFIG_BLACKFIN */ From 32d5dc9520f0c6f60f691dd478741c774e292406 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:11:58 -0500 Subject: [PATCH 06/28] USB: musb: pm: don't rely fully on clock support Since clock support is optional across processors, don't make the whole musb pm paths depend upon it. Just conditionalize the clock accesses. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2f42a5d50a5a..7efb380f9765 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2410,9 +2410,6 @@ static int musb_suspend(struct device *dev) unsigned long flags; struct musb *musb = dev_to_musb(&pdev->dev); - if (!musb->clock) - return 0; - spin_lock_irqsave(&musb->lock, flags); if (is_peripheral_active(musb)) { @@ -2427,10 +2424,12 @@ static int musb_suspend(struct device *dev) musb_save_context(musb); - if (musb->set_clock) - musb->set_clock(musb->clock, 0); - else - clk_disable(musb->clock); + if (musb->clock) { + if (musb->set_clock) + musb->set_clock(musb->clock, 0); + else + clk_disable(musb->clock); + } spin_unlock_irqrestore(&musb->lock, flags); return 0; } @@ -2440,13 +2439,12 @@ static int musb_resume_noirq(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct musb *musb = dev_to_musb(&pdev->dev); - if (!musb->clock) - return 0; - - if (musb->set_clock) - musb->set_clock(musb->clock, 1); - else - clk_enable(musb->clock); + if (musb->clock) { + if (musb->set_clock) + musb->set_clock(musb->clock, 1); + else + clk_enable(musb->clock); + } musb_restore_context(musb); From 1e393c6eece048052d4131ec4dad3b98e35a98e2 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sun, 24 Oct 2010 11:10:14 -0500 Subject: [PATCH 07/28] USB: musb: blackfin: pm: make it work Split the USB MMR init steps out into a helper func that both the platform init and the resume code may call. Then while suspending, the gpio_vrsel will change from high to low which will generate a wakeup event and resume the system immediately, so we need to manually drive it low before we sleep. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 72 ++++++++++++++++++++++++------------ drivers/usb/musb/musb_core.h | 2 +- 2 files changed, 50 insertions(+), 24 deletions(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 611a9d274363..32cc6d927760 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -323,30 +323,8 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode) return -EIO; } -int __init musb_platform_init(struct musb *musb, void *board_data) +static void musb_platform_reg_init(struct musb *musb) { - - /* - * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE - * and OTG HOST modes, while rev 1.1 and greater require PE7 to - * be low for DEVICE mode and high for HOST mode. We set it high - * here because we are in host mode - */ - - if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) { - printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n", - musb->config->gpio_vrsel); - return -ENODEV; - } - gpio_direction_output(musb->config->gpio_vrsel, 0); - - usb_nop_xceiv_register(); - musb->xceiv = otg_get_transceiver(); - if (!musb->xceiv) { - gpio_free(musb->config->gpio_vrsel); - return -ENODEV; - } - if (ANOMALY_05000346) { bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value); SSYNC(); @@ -380,6 +358,33 @@ int __init musb_platform_init(struct musb *musb, void *board_data) EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA | EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA); SSYNC(); +} + +int __init musb_platform_init(struct musb *musb, void *board_data) +{ + + /* + * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE + * and OTG HOST modes, while rev 1.1 and greater require PE7 to + * be low for DEVICE mode and high for HOST mode. We set it high + * here because we are in host mode + */ + + if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) { + printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n", + musb->config->gpio_vrsel); + return -ENODEV; + } + gpio_direction_output(musb->config->gpio_vrsel, 0); + + usb_nop_xceiv_register(); + musb->xceiv = otg_get_transceiver(); + if (!musb->xceiv) { + gpio_free(musb->config->gpio_vrsel); + return -ENODEV; + } + + musb_platform_reg_init(musb); if (is_host_enabled(musb)) { musb->board_set_vbus = bfin_set_vbus; @@ -394,6 +399,27 @@ int __init musb_platform_init(struct musb *musb, void *board_data) return 0; } +#ifdef CONFIG_PM +void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + if (is_host_active(musb)) + /* + * During hibernate gpio_vrsel will change from high to low + * low which will generate wakeup event resume the system + * immediately. Set it to 0 before hibernate to avoid this + * wakeup event. + */ + gpio_set_value(musb->config->gpio_vrsel, 0); +} + +void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + musb_platform_reg_init(musb); +} +#endif + int musb_platform_exit(struct musb *musb) { gpio_free(musb->config->gpio_vrsel); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 69797e5b46a7..febaabcc2b35 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -487,7 +487,7 @@ struct musb_context_registers { }; #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) + defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN) extern void musb_platform_save_context(struct musb *musb, struct musb_context_registers *musb_context); extern void musb_platform_restore_context(struct musb *musb, From 68f64714dc35a515a3064b300729e7809bcdd0e0 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:12:00 -0500 Subject: [PATCH 08/28] USB: musb: blackfin: fix dynamic device<->host changing We need to restart the timer in order to recognize USB devices in host-only mode. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 32cc6d927760..ade45a219c47 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -171,8 +171,9 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) } /* Start sampling ID pin, when plug is removed from MUSB */ - if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE - || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE + || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) || + (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); musb->a_wait_bcon = TIMER_DELAY; } From 9c7564620f82e55a9c8713311bffd401ec9d60fe Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:12:01 -0500 Subject: [PATCH 09/28] USB: musb: blackfin: push clkin value to platform resources In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 3 ++- include/linux/usb/musb.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ade45a219c47..fcb5206a65bd 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -337,7 +337,8 @@ static void musb_platform_reg_init(struct musb *musb) } /* Configure PLL oscillator register */ - bfin_write_USB_PLLOSC_CTRL(0x30a8); + bfin_write_USB_PLLOSC_CTRL(0x3080 | + ((480/musb->config->clkin) << 1)); SSYNC(); bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index ee2dd1d506ed..2387f9fc8138 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -89,6 +89,8 @@ struct musb_hdrc_config { /* A GPIO controlling VRSEL in Blackfin */ unsigned int gpio_vrsel; unsigned int gpio_vrsel_active; + /* musb CLKIN in Blackfin in MHZ */ + unsigned char clkin; #endif }; From b212091474a5f967979e62c5c24687ee4d0342d9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 27 Oct 2010 09:42:32 -0500 Subject: [PATCH 10/28] usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time musb driver still may write MUSB_DEVCTL register after clock is disabled in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc module is loaded for the 2nd time. The patch fixes the kernel oops in this case. [1] kernel oops when loading musb_hdrc module for the 2nd time [ 93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5 [ 93.387847] bus: 'platform': add driver musb_hdrc [ 93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc [ 93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc [ 93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable 0x0 [ 93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 93.405395] musb_hdrc: MHDRC RTL version 1.400 [ 93.405426] musb_hdrc: setup fifo_mode 3 [ 93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory [ 93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64 [ 93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512 [ 93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512 [ 93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512 [ 93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512 [ 93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256 [ 93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256 [ 93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms [ 93.405944] device: 'gadget': device_add [ 93.406921] PM: Adding info for No Bus:gadget [ 93.406951] musb_init_controller 2136: OTG mode, status 0, dev80 [ 93.407379] musb_do_idle 51: musb_do_idle: state=1 [ 93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc' [ 93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc [ 124.486938] bus: 'platform': remove driver musb_hdrc [ 124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend [ 124.491424] device: 'gadget': device_unregister [ 124.491424] PM: Removing info for No Bus:gadget [ 124.495269] gadget: musb_gadget_release [ 124.498992] driver: 'musb_hdrc': driver_release [ 129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5 [ 129.576934] bus: 'platform': add driver musb_hdrc [ 129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc [ 129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc [ 129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume [ 129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404 [ 129.600830] Internal error: : 1028 [#1] [ 129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev [ 129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc] [ 129.619964] CPU: 0 Not tainted (2.6.36-next-20101021+ #372) [ 129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc] [ 129.632415] LR is at mark_held_locks+0x64/0x94 [ 129.637084] pc : [] lr : [] psr: 20000013 [ 129.637084] sp : c6d5fcb0 ip : c6d5fc38 fp : c6d5fcd4 [ 129.649139] r10: c6e72180 r9 : fa0ab000 r8 : c05612e8 [ 129.654602] r7 : 0000005c r6 : c0559cc8 r5 : c6e72180 r4 : c0561548 [ 129.661468] r3 : 04d60047 r2 : fa0ab000 r1 : c07169d8 r0 : 00000000 [ 129.668304] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 129.675811] Control: 10c5387d Table: 86e4c019 DAC: 00000015 [ 129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0) [ 129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000) [ 129.692626] fca0: fa0ab000 c0555c54 c6d5fcd4 c0561548 [ 129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8 [ 129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40 [ 129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc [ 129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330 [ 129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0 [ 129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0 [ 129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74 [ 129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8 [ 129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8 [ 129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08 [ 129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222 [ 129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000 [ 129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278 [ 129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4 [ 129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8 [ 129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4 [ 129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0 [ 129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8 [ 129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28 [ 129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000 [ 129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388 [ 129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac [ 129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8 [ 129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a [ 129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b [ 129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c [ 129.924499] Backtrace: [ 129.927185] [] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [] (musb_probe+0x250/0xf2c [musb_hdrc]) [ 129.938781] r6:c05612e0 r5:00000003 r4:c0561548 [ 129.943695] [] (musb_probe+0x0/0xf2c [musb_hdrc]) from [] (platform_drv_probe+0x20/0x24) [ 129.954040] [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0x10c/0x264) [ 129.964172] [] (driver_probe_device+0x0/0x264) from [] (__driver_attach+0x9c/0xa0) [ 129.973968] [] (__driver_attach+0x0/0xa0) from [] (bus_for_each_dev+0x68/0x94) [ 129.983367] r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000 [ 129.989349] [] (bus_for_each_dev+0x0/0x94) from [] (driver_attach+0x24/0x28) [ 129.998565] r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000 [ 130.004547] [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xd0/0x274) [ 130.013671] [] (bus_add_driver+0x0/0x274) from [] (driver_register+0x78/0x158) [ 130.023101] [] (driver_register+0x0/0x158) from [] (platform_driver_register+0x5c/0x60) [ 130.033325] r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0 [ 130.039276] [] (platform_driver_register+0x0/0x60) from [] (platform_driver_probe+0x20/0xa8) [ 130.050018] [] (platform_driver_probe+0x0/0xa8) from [] (musb_init+0x4c/0x54 [musb_hdrc]) [ 130.060424] r5:000b9008 r4:0010281c [ 130.064239] [] (musb_init+0x0/0x54 [musb_hdrc]) from [] (do_one_initcall+0x3c/0x1c0) [ 130.074218] [] (do_one_initcall+0x0/0x1c0) from [] (sys_init_module+0xbc/0x1d0) [ 130.083709] [] (sys_init_module+0x0/0x1d0) from [] (ret_fast_syscall+0x0/0x3c) [ 130.093109] r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e [ 130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404) [ 130.105621] ---[ end trace 1d0bd69deb79164d ]--- Cc: Ajay Kumar Gupta Cc: Sergei Shtylyov Cc: Anand Gadiyar Cc: stable@kernel.org Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 7efb380f9765..78277170275b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1056,7 +1056,6 @@ static void musb_shutdown(struct platform_device *pdev) usb_remove_hcd(musb_to_hcd(musb)); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); /* FIXME power down */ } From 19aab56c7f68a577d638a98c019b89420943ee70 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 29 Oct 2010 04:23:27 -0500 Subject: [PATCH 11/28] usb: musb: Fix handling of spurious SESSREQ Rely on VBUS being valid on top off B device. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 78277170275b..e6669fc3b804 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -552,7 +552,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (int_usb & MUSB_INTR_SESSREQ) { void __iomem *mbase = musb->mregs; - if (devctl & MUSB_DEVCTL_BDEVICE) { + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS + && (devctl & MUSB_DEVCTL_BDEVICE)) { DBG(3, "SessReq while on B state\n"); return IRQ_HANDLED; } From 07397021058b7db468b67f8c41ce29ef6331ab92 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 24 Sep 2010 13:44:11 +0300 Subject: [PATCH 12/28] usb: musb: gadget: kill duplicate code in musb_gadget_queue() musb_gadget_queue() checks for '!req->buf' condition twice: in the second case the code is both duplicated and unreachable as the first check returns early. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f37b8594edeb..36cfd060dbe5 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1169,8 +1169,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, : DMA_FROM_DEVICE); request->mapped = 0; } - } else if (!req->buf) { - return -ENODATA; } else request->mapped = 0; From a91be2acc648f18d39b15c6eb7136b0c208e2cab Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 25 Oct 2010 15:04:13 -0700 Subject: [PATCH 13/28] usb.h: fix ioctl kernel-doc info Fix struct field name, prevent kernel-doc warnings. Warning(include/linux/usb.h:865): No description found for parameter 'unlocked_ioctl' Warning(include/linux/usb.h:865): Excess struct/union/enum/typedef member 'ioctl' description in 'usb_driver' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/usb.h b/include/linux/usb.h index 35fe6ab222bb..24300d8a1bc1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -797,7 +797,7 @@ struct usbdrv_wrap { * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the * driver module is being unloaded. - * @ioctl: Used for drivers that want to talk to userspace through + * @unlocked_ioctl: Used for drivers that want to talk to userspace through * the "usbfs" filesystem. This lets devices provide ways to * expose information to user space regardless of where they * do (or don't) show up otherwise in the filesystem. From 7fea0f714ffb3f303d4b66933af2df2f5584c9bf Mon Sep 17 00:00:00 2001 From: Sebastien Bourdeauducq Date: Wed, 3 Nov 2010 11:54:12 +0100 Subject: [PATCH 14/28] USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter (http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/) to the ftdi_sio driver and disable the first serial channel (used as JTAG from userspace). Signed-off-by: Sebastien Bourdeauducq Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 89a9a5847803..76f8b3556672 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -794,6 +794,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, + { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 7dfe02f1fb6a..263f62551197 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1100,3 +1100,10 @@ #define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18 #define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C #define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D + +/* + * Milkymist One JTAG/Serial + */ +#define QIHARDWARE_VID 0x20B7 +#define MILKYMISTONE_JTAGSERIAL_PID 0x0713 + From 6e16edfe62eb49274c8a74dc04d1c6f315f8f82b Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 8 Nov 2010 00:20:30 -0600 Subject: [PATCH 15/28] usb: musb: fail unaligned DMA transfers on v1.8 and above The Inventra DMA engine in version 1.8 and later of the MUSB controller cannot handle DMA addresses that are not aligned to a 4 byte boundary. It ends up ignoring the last two bits programmed in the DMA_ADDR register. This is a deliberate design change in the controller and is documented in the programming guide. Earlier versions of the controller could handle these accesses just fine. Fail dma_channel_program if we see an unaligned address when using the newer controllers, so that the caller can carry out the transfer using PIO mode. (Current callers already have this backup path in place). Signed-off-by: Anand Gadiyar Tested-by: Ming Lei Cc: Ajay Kumar Gupta Cc: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/musbhsdma.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 6f771af5cbdb..563114d613d6 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -158,6 +158,8 @@ static int dma_channel_program(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { struct musb_dma_channel *musb_channel = channel->private_data; + struct musb_dma_controller *controller = musb_channel->controller; + struct musb *musb = controller->private_data; DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n", musb_channel->epnum, @@ -167,6 +169,18 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + /* + * The DMA engine in RTL1.8 and above cannot handle + * DMA addresses that are not aligned to a 4 byte boundary. + * It ends up masking the last two bits of the address + * programmed in DMA_ADDR. + * + * Fail such DMA transfers, so that the backup PIO mode + * can carry out the transfer + */ + if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4)) + return false; + channel->actual_len = 0; musb_channel->start_addr = dma_addr; musb_channel->len = len; From c9a7ec8e543c105e3f661c2e290ce703d7d5d31e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Nov 2010 09:11:49 -0800 Subject: [PATCH 16/28] USB: the development of the usb tree is now in git So change the MAINTAINERS file to properly reflect this. Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0094224ca79b..5213f1f83ecc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6233,7 +6233,7 @@ USB SUBSYSTEM M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org W: http://www.linux-usb.org -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git S: Supported F: Documentation/usb/ F: drivers/net/usb/ From 018b97d084db483096421f95dfdf6c00e7144d67 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 29 Oct 2010 11:04:49 +0200 Subject: [PATCH 17/28] USB: Fix FSL USB driver on non Open Firmware systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB controller on powerpc. In this commit the Open Firmware code was selected and compiled unconditionally. This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX series), because ARM don't have OF support (yet). This patch fixes the problem by only selecting the OF code on systems with Open Firmware support. Reported-by: Uwe Kleine-König Signed-off-by: Marc Kleine-Budde Compile-Tested-by: Uwe Kleine-König Acked-by: Grant Likely Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/host/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b739ca814651..607d0db4a988 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -158,7 +158,7 @@ config USB_GADGET_FSL_USB2 boolean "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC select USB_GADGET_DUALSPEED - select USB_FSL_MPH_DR_OF + select USB_FSL_MPH_DR_OF if OF help Some of Freescale PowerPC processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2391c396ca32..6f4f8e6a40c7 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -122,7 +122,7 @@ config USB_EHCI_FSL bool "Support for Freescale on-chip EHCI USB controller" depends on USB_EHCI_HCD && FSL_SOC select USB_EHCI_ROOT_HUB_TT - select USB_FSL_MPH_DR_OF + select USB_FSL_MPH_DR_OF if OF ---help--- Variation of ARC USB block used in some Freescale chips. From 724c85251f78f1332e0a28f80cead0cee5b7c906 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 2 Nov 2010 10:30:57 +0100 Subject: [PATCH 18/28] USB: ehci/mxc: compile fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 65fd427 (USB: ehci tdi : let's tdi_reset set host mode) broke the build using ARM's mx51_defconfig: CC drivers/usb/host/ehci-hcd.o In file included from drivers/usb/host/ehci-hcd.c:1166: drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe': drivers/usb/host/ehci-mxc.c:192: error: 'ehci' undeclared (first use in this function) drivers/usb/host/ehci-mxc.c:192: error: (Each undeclared identifier is reported only once drivers/usb/host/ehci-mxc.c:192: error: for each function it appears in.) drivers/usb/host/ehci-mxc.c:117: warning: unused variable 'temp' make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1 make[2]: *** [drivers/usb/host/ehci-hcd.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Fix it together with the warning about the unused variable and use msleep instead of mdelay as requested by Alan Stern. Cc: Dinh Nguyen Cc: Alan Stern Signed-off-by: Uwe Kleine-König Tested-by: Nguyen Dinh-R00091 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mxc.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ac9c4d7c44af..bce85055019a 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -36,6 +36,8 @@ struct ehci_mxc_priv { static int ehci_mxc_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct device *dev = hcd->self.controller; + struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev); int retval; /* EHCI registers start at offset 0x100 */ @@ -63,6 +65,12 @@ static int ehci_mxc_setup(struct usb_hcd *hcd) ehci_reset(ehci); + /* set up the PORTSCx register */ + ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]); + + /* is this really needed? */ + msleep(10); + ehci_port_power(ehci, 0); return 0; } @@ -114,7 +122,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; struct usb_hcd *hcd; struct resource *res; - int irq, ret, temp; + int irq, ret; struct ehci_mxc_priv *priv; struct device *dev = &pdev->dev; @@ -188,10 +196,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_enable(priv->ahbclk); } - /* set up the PORTSCx register */ - ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]); - mdelay(10); - /* setup specific usb hw */ ret = mxc_initialize_usb_hw(pdev->id, pdata->flags); if (ret < 0) From 4b4cd731b08fd7fa2f370a5b329062fb5006dc24 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Wed, 3 Nov 2010 18:02:38 +0000 Subject: [PATCH 19/28] usb: gadget: goku_udc: add registered flag bit, fixing build The commit below cleaned up error handling, in part by introducing a registered flag bit. This however was not added to the device structure leding to build failures: commit 319feaabb6c7ccd90da6e3207563c265da7d21ae Author: Dan Carpenter Date: Tue Oct 5 18:55:34 2010 +0200 usb: gadget: goku_udc: Fix error path Add the missing registered flag bit. Signed-off-by: Andy Whitcroft Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/goku_udc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h index 566cb2319056..e7e0c69d3b1f 100644 --- a/drivers/usb/gadget/goku_udc.h +++ b/drivers/usb/gadget/goku_udc.h @@ -251,7 +251,8 @@ struct goku_udc { got_region:1, req_config:1, configured:1, - enabled:1; + enabled:1, + registered:1; /* pci state used to access those endpoints */ struct pci_dev *pdev; From ef821ae70fc35a76bdce7e07c70a1a7c2c33cdb9 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 2 Nov 2010 23:47:18 +0100 Subject: [PATCH 20/28] USB: xhci: Use GFP_ATOMIC under spin_lock coccinelle check scripts/coccinelle/locks/call_kern.cocci found that in drivers/usb/host/xhci.c an allocation with GFP_KERNEL is done with locks held: xhci_resume spin_lock_irq(xhci->lock) xhci_setup_msix kmalloc(GFP_KERNEL) Change it to GFP_ATOMIC. Signed-off-by: David Sterba CC: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5d7d4e951ea4..8ddc965718ab 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -240,7 +240,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) xhci->msix_entries = kmalloc((sizeof(struct msix_entry))*xhci->msix_count, - GFP_KERNEL); + GFP_ATOMIC); if (!xhci->msix_entries) { xhci_err(xhci, "Failed to allocate MSI-X entries\n"); return -ENOMEM; From 58c0d9d70109bd7e82bdb9517007311a48499960 Mon Sep 17 00:00:00 2001 From: ma rui Date: Mon, 1 Nov 2010 11:32:18 +0800 Subject: [PATCH 21/28] USB: option: fix when the driver is loaded incorrectly for some Huawei devices. When huawei datacard with PID 0x14AC is insterted into Linux system, the present kernel will load the "option" driver to all the interfaces. But actually, some interfaces run as other function and do not need "option" driver. In this path, we modify the id_tables, when the PID is 0x14ac ,VID is 0x12d1, Only when the interface's Class is 0xff,Subclass is 0xff, Pro is 0xff, it does need "option" driver. Signed-off-by: ma rui Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2297fb1bcf65..ef2977d3a613 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -518,7 +518,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, From 28609d4083bcd4879e951b0c4ecf4c3a88761261 Mon Sep 17 00:00:00 2001 From: Jim Sung Date: Thu, 4 Nov 2010 18:47:51 -0700 Subject: [PATCH 22/28] usb: subtle increased memory usage in u_serial OK, the USB gadget serial driver actually has a couple of problems. On gs_open(), it always allocates and queues an additional QUEUE_SIZE (16) worth of requests, so with a loop like this: i=1 ; while echo $i > /dev/ttyGS0 ; do let i++ ; done eventually we run into OOM (Out of Memory). Technically, it is not a leak as everything gets freed up when the USB connection is broken, but not on gs_close(). With a USB device/gadget controller driver that has limited resources (e.g., Marvell has a this MAX_XDS_FOR_TR_CALLS of 64 for transmit and receive), so even after 4 stty -F /dev/ttyGS0 we cannot transmit anymore. We can still receive (not necessarily reliably) as now we have 16 * 4 = 64 descriptors/buffers ready, but the device is otherwise not usable. Signed-off-by: Jim Sung Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/u_serial.c | 54 ++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 14 deletions(-) diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 01e5354a4c20..40f7716b31fc 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -105,11 +105,15 @@ struct gs_port { wait_queue_head_t close_wait; /* wait for last close */ struct list_head read_pool; + int read_started; + int read_allocated; struct list_head read_queue; unsigned n_read; struct tasklet_struct push; struct list_head write_pool; + int write_started; + int write_allocated; struct gs_buf port_write_buf; wait_queue_head_t drain_wait; /* wait while writes drain */ @@ -363,6 +367,9 @@ __acquires(&port->port_lock) struct usb_request *req; int len; + if (port->write_started >= QUEUE_SIZE) + break; + req = list_entry(pool->next, struct usb_request, list); len = gs_send_packet(port, req->buf, in->maxpacket); if (len == 0) { @@ -397,6 +404,8 @@ __acquires(&port->port_lock) break; } + port->write_started++; + /* abort immediately after disconnect */ if (!port->port_usb) break; @@ -418,7 +427,6 @@ __acquires(&port->port_lock) { struct list_head *pool = &port->read_pool; struct usb_ep *out = port->port_usb->out; - unsigned started = 0; while (!list_empty(pool)) { struct usb_request *req; @@ -430,6 +438,9 @@ __acquires(&port->port_lock) if (!tty) break; + if (port->read_started >= QUEUE_SIZE) + break; + req = list_entry(pool->next, struct usb_request, list); list_del(&req->list); req->length = out->maxpacket; @@ -447,13 +458,13 @@ __acquires(&port->port_lock) list_add(&req->list, pool); break; } - started++; + port->read_started++; /* abort immediately after disconnect */ if (!port->port_usb) break; } - return started; + return port->read_started; } /* @@ -535,6 +546,7 @@ static void gs_rx_push(unsigned long _port) } recycle: list_move(&req->list, &port->read_pool); + port->read_started--; } /* Push from tty to ldisc; without low_latency set this is handled by @@ -587,6 +599,7 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) spin_lock(&port->port_lock); list_add(&req->list, &port->write_pool); + port->write_started--; switch (req->status) { default: @@ -608,7 +621,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock(&port->port_lock); } -static void gs_free_requests(struct usb_ep *ep, struct list_head *head) +static void gs_free_requests(struct usb_ep *ep, struct list_head *head, + int *allocated) { struct usb_request *req; @@ -616,25 +630,31 @@ static void gs_free_requests(struct usb_ep *ep, struct list_head *head) req = list_entry(head->next, struct usb_request, list); list_del(&req->list); gs_free_req(ep, req); + if (allocated) + (*allocated)--; } } static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head, - void (*fn)(struct usb_ep *, struct usb_request *)) + void (*fn)(struct usb_ep *, struct usb_request *), + int *allocated) { int i; struct usb_request *req; + int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE; /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't * do quite that many this time, don't fail ... we just won't * be as speedy as we might otherwise be. */ - for (i = 0; i < QUEUE_SIZE; i++) { + for (i = 0; i < n; i++) { req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); if (!req) return list_empty(head) ? -ENOMEM : 0; req->complete = fn; list_add_tail(&req->list, head); + if (allocated) + (*allocated)++; } return 0; } @@ -661,14 +681,15 @@ static int gs_start_io(struct gs_port *port) * configurations may use different endpoints with a given port; * and high speed vs full speed changes packet sizes too. */ - status = gs_alloc_requests(ep, head, gs_read_complete); + status = gs_alloc_requests(ep, head, gs_read_complete, + &port->read_allocated); if (status) return status; status = gs_alloc_requests(port->port_usb->in, &port->write_pool, - gs_write_complete); + gs_write_complete, &port->write_allocated); if (status) { - gs_free_requests(ep, head); + gs_free_requests(ep, head, &port->read_allocated); return status; } @@ -680,8 +701,9 @@ static int gs_start_io(struct gs_port *port) if (started) { tty_wakeup(port->port_tty); } else { - gs_free_requests(ep, head); - gs_free_requests(port->port_usb->in, &port->write_pool); + gs_free_requests(ep, head, &port->read_allocated); + gs_free_requests(port->port_usb->in, &port->write_pool, + &port->write_allocated); status = -EIO; } @@ -1315,8 +1337,12 @@ void gserial_disconnect(struct gserial *gser) spin_lock_irqsave(&port->port_lock, flags); if (port->open_count == 0 && !port->openclose) gs_buf_free(&port->port_write_buf); - gs_free_requests(gser->out, &port->read_pool); - gs_free_requests(gser->out, &port->read_queue); - gs_free_requests(gser->in, &port->write_pool); + gs_free_requests(gser->out, &port->read_pool, NULL); + gs_free_requests(gser->out, &port->read_queue, NULL); + gs_free_requests(gser->in, &port->write_pool, NULL); + + port->read_allocated = port->read_started = + port->write_allocated = port->write_started = 0; + spin_unlock_irqrestore(&port->port_lock, flags); } From 5dc92cf1d0b4b0debbd2e333b83f9746c103533d Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sat, 6 Nov 2010 17:41:35 +0300 Subject: [PATCH 23/28] usb: misc: sisusbvga: fix information leak to userland Structure sisusb_info is copied to userland with "sisusb_reserved" field uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 70d00e99a4b4..dd573abd2d1e 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3008,6 +3008,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) #else x.sisusb_conactive = 0; #endif + memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved)); if (copy_to_user((void __user *)arg, &x, sizeof(x))) retval = -EFAULT; From eca67aaeebd6e5d22b0d991af1dd0424dc703bfb Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sat, 6 Nov 2010 17:41:31 +0300 Subject: [PATCH 24/28] usb: misc: iowarrior: fix information leak to userland Structure iowarrior_info is copied to userland with padding byted between "serial" and "revision" fields uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov Cc: stable Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/iowarrior.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 375664198776..c9078e4e1f4d 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -553,6 +553,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, /* needed for power consumption */ struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc; + memset(&info, 0, sizeof(info)); /* directly from the descriptor */ info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); info.product = dev->product_id; From 886ccd4520064408ce5876cfe00554ce52ecf4a7 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sat, 6 Nov 2010 17:41:28 +0300 Subject: [PATCH 25/28] usb: core: fix information leak to userland Structure usbdevfs_connectinfo is copied to userland with padding byted after "slow" field uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index f1aaff6202a5..045bb4b823e1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -965,10 +965,11 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg) static int proc_connectinfo(struct dev_state *ps, void __user *arg) { - struct usbdevfs_connectinfo ci; + struct usbdevfs_connectinfo ci = { + .devnum = ps->dev->devnum, + .slow = ps->dev->speed == USB_SPEED_LOW + }; - ci.devnum = ps->dev->devnum; - ci.slow = ps->dev->speed == USB_SPEED_LOW; if (copy_to_user(arg, &ci, sizeof(ci))) return -EFAULT; return 0; From 793b62337ecf1bf9a816fcb7105bb1ca424cf7d4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 7 Nov 2010 22:04:43 +0100 Subject: [PATCH 26/28] UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than crashing on NULL dereference if kzalloc fails Crashing on a null pointer deref is never a nice thing to do. It seems to me that it's better to simply return UWB_RSV_ALLOC_NOT_FOUND if kzalloc() fails in uwb_rsv_find_best_allocation(). Signed-off-by: Jesper Juhl Acked-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/allocator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c index 436e4f7110cb..e45e673b8770 100644 --- a/drivers/uwb/allocator.c +++ b/drivers/uwb/allocator.c @@ -326,7 +326,8 @@ int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *availab int bit_index; ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL); - + if (!ai) + return UWB_RSV_ALLOC_NOT_FOUND; ai->min_mas = rsv->min_mas; ai->max_mas = rsv->max_mas; ai->max_interval = rsv->max_interval; From 1c0a38038e8fcfaa6b5a81d53a4898f3f939f582 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Sun, 7 Nov 2010 22:14:31 +0100 Subject: [PATCH 27/28] USB: ohci-jz4740: Fix spelling in MODULE_ALIAS platfrom -> platform Cc: David Brownell Signed-off-by: Stefan Weil Reviewed-by: Jesper Juhl Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-jz4740.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c index 10e1872f3ab9..931d588c3fb5 100644 --- a/drivers/usb/host/ohci-jz4740.c +++ b/drivers/usb/host/ohci-jz4740.c @@ -273,4 +273,4 @@ static struct platform_driver ohci_hcd_jz4740_driver = { }, }; -MODULE_ALIAS("platfrom:jz4740-ohci"); +MODULE_ALIAS("platform:jz4740-ohci"); From 868719752d60fb04a3714d77fdeb780b4d585faf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 11 Nov 2010 09:41:02 -0800 Subject: [PATCH 28/28] Revert "USB: xhci: Use GFP_ATOMIC under spin_lock" This reverts commit ef821ae70fc35a76bdce7e07c70a1a7c2c33cdb9. The correct thing to do is to drop the spinlock, not change the GFP flag here. Thanks to Sarah for pointing out I shouldn't have taken this patch in the first place. Cc: Sarah Sharp Cc: David Sterba Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8ddc965718ab..5d7d4e951ea4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -240,7 +240,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) xhci->msix_entries = kmalloc((sizeof(struct msix_entry))*xhci->msix_count, - GFP_ATOMIC); + GFP_KERNEL); if (!xhci->msix_entries) { xhci_err(xhci, "Failed to allocate MSI-X entries\n"); return -ENOMEM;