ASPEED soc driver updates for 5.11

New drivers:
 
  - SoC info driver to expose revision information
 
 New features:
 
  - AST2600 support for the LPC control driver. This includes
    setting the LPC2AHB bridge up in a backwards compatible manner.
 
 Cleanups:
 
  - LPC control
  - Kconfig
  - Bindings updates for AST2600 strings
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl/Ekp8ACgkQa3ZZB4FH
 cJ5CkA/+OqPM3CmJlxqgzy496suswaEeMlyuSECSmpQ6Z6jHIvKybzBXlf8zQXsW
 IFObgwqYdGBGOPG4HmvwJ307f2FjIgscEFJGr5kuZli47HTr288xRoAqDH7Oa5xu
 S8UcgxcpkSnAqUVErn9JplpCpKEt2Qzb4VoMZ2s5NtQDpkQUwybkO5siuG7Ck265
 9mzrQgSZ05zD+VSLA5EknQqsrtcTun7fQuBh3DW+4SUCAkzeGCTqkgT2jdvZ+TSu
 jcOMvBGu+gQ2cV2FewQroJ072cIDt6JbPiFDlg+16DoB6N4c4hLypSY62UIDk4Lt
 Y3QRrh7KKAzZ0Ofi1Hlj98/eMClK5h/W0ry3AyQtP3lwtAEVmMYiSm8xyU3lxTEi
 Ohhnwlmm+Ak00fmEKgHlTf9brIYncq3ErAjVOhDvlXBdEMXQGySoON/q81NqVWSA
 TXQXNrAUKkGMO6kHt8x8+8k07tBhqg170Wm10flQrgpP7rnsKgYxdSsQZ7dJvURI
 Ydh+E2DO2d15JDoQii+1RPalcB1AZZCC4hr4Qw0U884DM0uK0M3309vGnUy3nPHS
 vIy6QdW9QGnvsdldFeYMGVF0WAeBwIKvIFVf95hqhmqYjdUkPhomaqtWydVrpjNq
 VbF0zKKgOyDOIDpeS1k4YJ3uwps/D1rgCrer+ausclaQJJOreEw=
 =KcaK
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/drivers

ASPEED soc driver updates for 5.11

New drivers:

 - SoC info driver to expose revision information

New features:

 - AST2600 support for the LPC control driver. This includes
   setting the LPC2AHB bridge up in a backwards compatible manner.

Cleanups:

 - LPC control
 - Kconfig
 - Bindings updates for AST2600 strings

* tag 'aspeed-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  soc: aspeed: Enable drivers with ARCH_ASPEED
  soc: aspeed: Fix a reference leak in aspeed_socinfo_init()
  soc: aspeed: remove unneeded semicolon
  soc: aspeed-lpc-ctrl: Fix driver name
  soc: aspeed-lpc-ctrl: Fix whitespace
  soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
  soc: aspeed-lpc-ctrl: Fail probe of lpc-ctrl if reserved memory is not aligned
  soc: aspeed: lpc: Add AST2600 compatible strings
  dt-bindings: aspeed-lpc: Add AST2600 compatible strings
  ARM: dts: aspeed: Add silicon id node
  soc: aspeed: Add soc info driver
  dt-bindings: aspeed: Add silicon id node to SCU
  soc: aspeed: Improve kconfig

Link: https://lore.kernel.org/r/CACPK8Xe=9ezhyWRMqVOEQr7SU1YoYfVBGGdGzjmE4SiBr--vJQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/mfd/aspeed-lpc.txt

@@ -46,6 +46,7 @@ Required properties
 - compatible:	One of:
 		"aspeed,ast2400-lpc", "simple-mfd"
 		"aspeed,ast2500-lpc", "simple-mfd"
+		"aspeed,ast2600-lpc", "simple-mfd"
 
 - reg:		contains the physical address and length values of the Aspeed
                 LPC memory region.
@@ -64,6 +65,7 @@ BMC Node
 - compatible:	One of:
 		"aspeed,ast2400-lpc-bmc"
 		"aspeed,ast2500-lpc-bmc"
+		"aspeed,ast2600-lpc-bmc"
 
 - reg:		contains the physical address and length values of the
                 H8S/2168-compatible LPC controller memory region
@@ -74,6 +76,7 @@ Host Node
 - compatible:   One of:
 		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
 		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+		"aspeed,ast2600-lpc-host", "simple-mfd", "syscon"
 
 - reg:		contains the address and length values of the host-related
                 register space for the Aspeed LPC controller
@@ -128,6 +131,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lpc-ctrl";
 		"aspeed,ast2500-lpc-ctrl";
+		"aspeed,ast2600-lpc-ctrl";
 
 - reg:		contains offset/length values of the host interface controller
 		memory regions
@@ -168,6 +172,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lhc";
 		"aspeed,ast2500-lhc";
+		"aspeed,ast2600-lhc";
 
 - reg:		contains offset/length values of the LHC memory regions. In the
 		AST2400 and AST2500 there are two regions.
@@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose to modify this configuration.
 
 Required properties:
 
- - compatible:		"aspeed,ast2500-lpc-reset" or
+ - compatible:		"aspeed,ast2600-lpc-reset" or
+			"aspeed,ast2500-lpc-reset"
 			"aspeed,ast2400-lpc-reset"
  - reg:			offset and length of the IP in the LHC memory region
  - #reset-controller	indicates the number of reset cells expected

Documentation/devicetree/bindings/mfd/aspeed-scu.txt

@@ -20,3 +20,29 @@ syscon: syscon@1e6e2000 {
 	#clock-cells = <1>;
 	#reset-cells = <1>;
 };
+
+Silicon ID
+-----------------
+
+Families have unique hardware silicon identifiers within the SoC.
+
+Required properties:
+
+ - compatible:		"aspeed,silicon-id" or:
+			"aspeed,ast2400-silicon-id" or
+			"aspeed,ast2500-silicon-id" or
+			"aspeed,ast2600-silicon-id"
+
+ - reg:			offset and length of the silicon id information
+			optionally, a second offset and length describes the unique chip id
+
+			The reg should be the unique silicon id register, and
+			not backwards compatible one in eg. the 2600.
+
+Example:
+
+
+silicon-id@7c {
+        compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+        reg = <0x7c 0x4 0x150 0x8>;
+};

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -192,6 +192,11 @@
 					status = "disabled";
 				};
 
+				silicon-id@7c {
+					compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4>;
+				};
+
 				pinctrl: pinctrl@80 {
 					reg = <0x80 0x18>, <0xa0 0x10>;
 					compatible = "aspeed,ast2400-pinctrl";

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -239,6 +239,11 @@
 					status = "disabled";
 				};
 
+				silicon-id@7c {
+					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4 0x150 0x8>;
+				};
+
 				pinctrl: pinctrl@80 {
 					compatible = "aspeed,ast2500-pinctrl";
 					reg = <0x80 0x18>, <0xa0 0x10>;

arch/arm/boot/dts/aspeed-g6.dtsi

@@ -311,6 +311,11 @@
 					compatible = "aspeed,ast2600-pinctrl";
 				};
 
+				silicon-id@14 {
+					compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
+					reg = <0x14 0x4 0x5b0 0x8>;
+				};
+
 				smp-memram@180 {
 					compatible = "aspeed,ast2600-smpmem";
 					reg = <0x180 0x40>;

drivers/soc/Makefile

@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_ARCH_ACTIONS)	+= actions/
-obj-$(CONFIG_SOC_ASPEED)	+= aspeed/
+obj-y				+= aspeed/
 obj-$(CONFIG_ARCH_AT91)		+= atmel/
 obj-y				+= bcm/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/

drivers/soc/aspeed/Kconfig

@@ -1,32 +1,47 @@
 # SPDX-License-Identifier: GPL-2.0-only
-menu "Aspeed SoC drivers"
 
-config SOC_ASPEED
-	def_bool y
-	depends on ARCH_ASPEED || COMPILE_TEST
+if ARCH_ASPEED || COMPILE_TEST
+
+menu "ASPEED SoC drivers"
 
 config ASPEED_LPC_CTRL
-	depends on SOC_ASPEED && REGMAP && MFD_SYSCON
-	tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
+	tristate "ASPEED LPC firmware cycle control"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
 	help
-	  Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
-	  ioctl()s, the driver also provides a read/write interface to a BMC ram
-	  region where the host LPC read/write region can be buffered.
+	  Control LPC firmware cycle mappings through ioctl()s. The driver
+	  also provides a read/write interface to a BMC ram region where the
+	  host LPC read/write region can be buffered.
 
 config ASPEED_LPC_SNOOP
-	tristate "Aspeed ast2500 HOST LPC snoop support"
-	depends on SOC_ASPEED && REGMAP && MFD_SYSCON
+	tristate "ASPEED LPC snoop support"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
 	help
 	  Provides a driver to control the LPC snoop interface which
 	  allows the BMC to listen on and save the data written by
 	  the host to an arbitrary LPC I/O port.
 
 config ASPEED_P2A_CTRL
-	depends on SOC_ASPEED && REGMAP && MFD_SYSCON
-	tristate "Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC bridge control"
+	tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
+	select REGMAP
+	select MFD_SYSCON
+	default ARCH_ASPEED
 	help
-	  Control Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC mappings through
-	  ioctl()s, the driver also provides an interface for userspace mappings to
-	  a pre-defined region.
+	  Control ASPEED P2A VGA MMIO to BMC mappings through ioctl()s.  The
+	  driver also provides an interface for userspace mappings to a
+	  pre-defined region.
+
+config ASPEED_SOCINFO
+	bool "ASPEED SoC Information driver"
+	default ARCH_ASPEED
+	select SOC_BUS
+	default ARCH_ASPEED
+	help
+	  Say yes to support decoding of ASPEED BMC information.
 
 endmenu
+
+endif

drivers/soc/aspeed/Makefile

@@ -2,3 +2,4 @@
 obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
 obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
 obj-$(CONFIG_ASPEED_P2A_CTRL)	+= aspeed-p2a-ctrl.o
+obj-$(CONFIG_ASPEED_SOCINFO)	+= aspeed-socinfo.o

drivers/soc/aspeed/aspeed-lpc-ctrl.c

@@ -4,6 +4,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/log2.h>
 #include <linux/mfd/syscon.h>
 #include <linux/miscdevice.h>
 #include <linux/mm.h>
@@ -21,6 +22,9 @@
 #define HICR5_ENL2H	BIT(8)
 #define HICR5_ENFWH	BIT(10)
 
+#define HICR6 0x4
+#define SW_FWH2AHB	BIT(17)
+
 #define HICR7 0x8
 #define HICR8 0xc
 
@@ -30,8 +34,9 @@ struct aspeed_lpc_ctrl {
 	struct clk		*clk;
 	phys_addr_t		mem_base;
 	resource_size_t		mem_size;
-	u32		pnor_size;
-	u32		pnor_base;
+	u32			pnor_size;
+	u32			pnor_base;
+	bool			fwh2ahb;
 };
 
 static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
@@ -176,6 +181,16 @@ static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
 		if (rc)
 			return rc;
 
+		/*
+		 * Switch to FWH2AHB mode, AST2600 only.
+		 *
+		 * The other bits in this register are interrupt status bits
+		 * that are cleared by writing 1. As we don't want to clear
+		 * them, set only the bit of interest.
+		 */
+		if (lpc_ctrl->fwh2ahb)
+			regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB);
+
 		/*
 		 * Enable LPC FHW cycles. This is required for the host to
 		 * access the regions specified.
@@ -241,6 +256,18 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
 
 		lpc_ctrl->mem_size = resource_size(&resm);
 		lpc_ctrl->mem_base = resm.start;
+
+		if (!is_power_of_2(lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory size must be a power of 2, got %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
+
+		if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory must be naturally aligned for size %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
 	}
 
 	lpc_ctrl->regmap = syscon_node_to_regmap(
@@ -261,6 +288,9 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
 		return rc;
 	}
 
+	if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl"))
+		lpc_ctrl->fwh2ahb = true;
+
 	lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
 	lpc_ctrl->miscdev.name = DEVICE_NAME;
 	lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
@@ -291,6 +321,7 @@ static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
 static const struct of_device_id aspeed_lpc_ctrl_match[] = {
 	{ .compatible = "aspeed,ast2400-lpc-ctrl" },
 	{ .compatible = "aspeed,ast2500-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2600-lpc-ctrl" },
 	{ },
 };
 
@@ -308,4 +339,4 @@ module_platform_driver(aspeed_lpc_ctrl_driver);
 MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
-MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings");
+MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");

drivers/soc/aspeed/aspeed-lpc-snoop.c

@@ -325,6 +325,8 @@ static const struct of_device_id aspeed_lpc_snoop_match[] = {
 	  .data = &ast2400_model_data },
 	{ .compatible = "aspeed,ast2500-lpc-snoop",
 	  .data = &ast2500_model_data },
+	{ .compatible = "aspeed,ast2600-lpc-snoop",
+	  .data = &ast2500_model_data },
 	{ },
 };
 

drivers/soc/aspeed/aspeed-socinfo.c

@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright 2019 IBM Corp. */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+static struct {
+	const char *name;
+	const u32 id;
+} const rev_table[] = {
+	/* AST2400 */
+	{ "AST2400", 0x02000303 },
+	{ "AST1400", 0x02010103 },
+	{ "AST1250", 0x02010303 },
+	/* AST2500 */
+	{ "AST2500", 0x04000303 },
+	{ "AST2510", 0x04000103 },
+	{ "AST2520", 0x04000203 },
+	{ "AST2530", 0x04000403 },
+	/* AST2600 */
+	{ "AST2600", 0x05000303 },
+	{ "AST2620", 0x05010203 },
+};
+
+static const char *siliconid_to_name(u32 siliconid)
+{
+	unsigned int id = siliconid & 0xff00ffff;
+	unsigned int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(rev_table) ; ++i) {
+		if (rev_table[i].id == id)
+			return rev_table[i].name;
+	}
+
+	return "Unknown";
+}
+
+static const char *siliconid_to_rev(u32 siliconid)
+{
+	unsigned int rev = (siliconid >> 16) & 0xff;
+
+	switch (rev) {
+	case 0:
+		return "A0";
+	case 1:
+		return "A1";
+	case 3:
+		return "A2";
+	}
+
+	return "??";
+}
+
+static int __init aspeed_socinfo_init(void)
+{
+	struct soc_device_attribute *attrs;
+	struct soc_device *soc_dev;
+	struct device_node *np;
+	void __iomem *reg;
+	bool has_chipid = false;
+	u32 siliconid;
+	u32 chipid[2];
+	const char *machine = NULL;
+
+	np = of_find_compatible_node(NULL, NULL, "aspeed,silicon-id");
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	reg = of_iomap(np, 0);
+	if (!reg) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+	siliconid = readl(reg);
+	iounmap(reg);
+
+	/* This is optional, the ast2400 does not have it */
+	reg = of_iomap(np, 1);
+	if (reg) {
+		has_chipid = true;
+		chipid[0] = readl(reg);
+		chipid[1] = readl(reg + 4);
+		iounmap(reg);
+	}
+	of_node_put(np);
+
+	attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
+	if (!attrs)
+		return -ENODEV;
+
+	/*
+	 * Machine: Romulus BMC
+	 * Family: AST2500
+	 * Revision: A1
+	 * SoC ID: raw silicon revision id
+	 * Serial Number: 64-bit chipid
+	 */
+
+	np = of_find_node_by_path("/");
+	of_property_read_string(np, "model", &machine);
+	if (machine)
+		attrs->machine = kstrdup(machine, GFP_KERNEL);
+	of_node_put(np);
+
+	attrs->family = siliconid_to_name(siliconid);
+	attrs->revision = siliconid_to_rev(siliconid);
+	attrs->soc_id = kasprintf(GFP_KERNEL, "%08x", siliconid);
+
+	if (has_chipid)
+		attrs->serial_number = kasprintf(GFP_KERNEL, "%08x%08x",
+						 chipid[1], chipid[0]);
+
+	soc_dev = soc_device_register(attrs);
+	if (IS_ERR(soc_dev)) {
+		kfree(attrs->soc_id);
+		kfree(attrs->serial_number);
+		kfree(attrs);
+		return PTR_ERR(soc_dev);
+	}
+
+	pr_info("ASPEED %s rev %s (%s)\n",
+			attrs->family,
+			attrs->revision,
+			attrs->soc_id);
+
+	return 0;
+}
+early_initcall(aspeed_socinfo_init);