renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code
f69255ce67
linux-next/drivers/gpio/gpio-altera.c

379 lines
10 KiB
C
Raw Normal View History

drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
/*
* Copyright (C) 2013 Altera Corporation
* Based on gpio-mpc8xxx.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#define ALTERA_GPIO_MAX_NGPIO 32
#define ALTERA_GPIO_DATA 0x0
#define ALTERA_GPIO_DIR 0x4
#define ALTERA_GPIO_IRQ_MASK 0x8
#define ALTERA_GPIO_EDGE_CAP 0xc
/**
* struct altera_gpio_chip
* @mmchip : memory mapped chip structure.
* @gpio_lock : synchronization lock so that new irq/set/get requests
will be blocked until the current one completes.
* @interrupt_trigger : specifies the hardware configured IRQ trigger type
(rising, falling, both, high)
* @mapped_irq : kernel mapped irq number.
*/
struct altera_gpio_chip {
struct of_mm_gpio_chip mmchip;
spinlock_t gpio_lock;
int interrupt_trigger;
int mapped_irq;
};
gpio: altera: use container_of() to get state container The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:54:12 +08:00
static struct altera_gpio_chip *to_altera(struct gpio_chip *gc)
{
return container_of(gc, struct altera_gpio_chip, mmchip.gc);
}
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
static void altera_gpio_irq_unmask(struct irq_data *d)
{
struct altera_gpio_chip *altera_gc;
struct of_mm_gpio_chip *mm_gc;
unsigned long flags;
u32 intmask;
gpio: altera: use container_of() to get state container The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:54:12 +08:00
altera_gc = to_altera(irq_data_get_irq_chip_data(d));
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
mm_gc = &altera_gc->mmchip;
spin_lock_irqsave(&altera_gc->gpio_lock, flags);
intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
/* Set ALTERA_GPIO_IRQ_MASK bit to unmask */
intmask |= BIT(irqd_to_hwirq(d));
writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
}
static void altera_gpio_irq_mask(struct irq_data *d)
{
struct altera_gpio_chip *altera_gc;
struct of_mm_gpio_chip *mm_gc;
unsigned long flags;
u32 intmask;
gpio: altera: use container_of() to get state container The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:54:12 +08:00
altera_gc = to_altera(irq_data_get_irq_chip_data(d));
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
mm_gc = &altera_gc->mmchip;
spin_lock_irqsave(&altera_gc->gpio_lock, flags);
intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
/* Clear ALTERA_GPIO_IRQ_MASK bit to mask */
intmask &= ~BIT(irqd_to_hwirq(d));
writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
}
/**
* This controller's IRQ type is synthesized in hardware, so this function
* just checks if the requested set_type matches the synthesized IRQ type
*/
static int altera_gpio_irq_set_type(struct irq_data *d,
unsigned int type)
{
struct altera_gpio_chip *altera_gc;
gpio: altera: use container_of() to get state container The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:54:12 +08:00
altera_gc = to_altera(irq_data_get_irq_chip_data(d));
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
if (type == IRQ_TYPE_NONE)
return 0;
if (type == IRQ_TYPE_LEVEL_HIGH &&
altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH)
return 0;
if (type == IRQ_TYPE_EDGE_RISING &&
altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_RISING)
return 0;
if (type == IRQ_TYPE_EDGE_FALLING &&
altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_FALLING)
return 0;
if (type == IRQ_TYPE_EDGE_BOTH &&
altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_BOTH)
return 0;
return -EINVAL;
}
gpio: Fix checkpatch.pl issues This patch fixes some issues given by checkpatch. Fixes include bracket placement, spacing and indenting. Signed-off-by: Daniel Lockyer <thisisdaniellockyer@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 21:26:27 +08:00
static unsigned int altera_gpio_irq_startup(struct irq_data *d)
{
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
altera_gpio_irq_unmask(d);
return 0;
}
static struct irq_chip altera_irq_chip = {
.name = "altera-gpio",
.irq_mask = altera_gpio_irq_mask,
.irq_unmask = altera_gpio_irq_unmask,
.irq_set_type = altera_gpio_irq_set_type,
.irq_startup = altera_gpio_irq_startup,
.irq_shutdown = altera_gpio_irq_mask,
};
static int altera_gpio_get(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm_gc;
mm_gc = to_of_mm_gpio_chip(gc);
return !!(readl(mm_gc->regs + ALTERA_GPIO_DATA) & BIT(offset));
}
static void altera_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct of_mm_gpio_chip *mm_gc;
struct altera_gpio_chip *chip;
unsigned long flags;
unsigned int data_reg;
mm_gc = to_of_mm_gpio_chip(gc);
chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
spin_lock_irqsave(&chip->gpio_lock, flags);
data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
if (value)
data_reg |= BIT(offset);
else
data_reg &= ~BIT(offset);
writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
spin_unlock_irqrestore(&chip->gpio_lock, flags);
}
static int altera_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm_gc;
struct altera_gpio_chip *chip;
unsigned long flags;
unsigned int gpio_ddr;
mm_gc = to_of_mm_gpio_chip(gc);
chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
spin_lock_irqsave(&chip->gpio_lock, flags);
/* Set pin as input, assumes software controlled IP */
gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
gpio_ddr &= ~BIT(offset);
writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
spin_unlock_irqrestore(&chip->gpio_lock, flags);
return 0;
}
static int altera_gpio_direction_output(struct gpio_chip *gc,
unsigned offset, int value)
{
struct of_mm_gpio_chip *mm_gc;
struct altera_gpio_chip *chip;
unsigned long flags;
unsigned int data_reg, gpio_ddr;
mm_gc = to_of_mm_gpio_chip(gc);
chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
spin_lock_irqsave(&chip->gpio_lock, flags);
/* Sets the GPIO value */
data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
if (value)
data_reg |= BIT(offset);
else
data_reg &= ~BIT(offset);
writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
/* Set pin as output, assumes software controlled IP */
gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
gpio_ddr |= BIT(offset);
writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
spin_unlock_irqrestore(&chip->gpio_lock, flags);
return 0;
}
genirq: Remove irq argument from irq flow handlers Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14 16:42:37 +08:00
static void altera_gpio_irq_edge_handler(struct irq_desc *desc)
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
{
struct altera_gpio_chip *altera_gc;
struct irq_chip *chip;
struct of_mm_gpio_chip *mm_gc;
struct irq_domain *irqdomain;
unsigned long status;
int i;
gpio: altera: use container_of() to get state container The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:54:12 +08:00
altera_gc = to_altera(irq_desc_get_handler_data(desc));
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
chip = irq_desc_get_chip(desc);
mm_gc = &altera_gc->mmchip;
irqdomain = altera_gc->mmchip.gc.irqdomain;
chained_irq_enter(chip, desc);
while ((status =
(readl(mm_gc->regs + ALTERA_GPIO_EDGE_CAP) &
readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK)))) {
writel(status, mm_gc->regs + ALTERA_GPIO_EDGE_CAP);
for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
generic_handle_irq(irq_find_mapping(irqdomain, i));
}
}
chained_irq_exit(chip, desc);
}
genirq: Remove irq argument from irq flow handlers Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14 16:42:37 +08:00
static void altera_gpio_irq_leveL_high_handler(struct irq_desc *desc)
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
{
struct altera_gpio_chip *altera_gc;
struct irq_chip *chip;
struct of_mm_gpio_chip *mm_gc;
struct irq_domain *irqdomain;
unsigned long status;
int i;
gpio: altera: use container_of() to get state container The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25 16:54:12 +08:00
altera_gc = to_altera(irq_desc_get_handler_data(desc));
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
chip = irq_desc_get_chip(desc);
mm_gc = &altera_gc->mmchip;
irqdomain = altera_gc->mmchip.gc.irqdomain;
chained_irq_enter(chip, desc);
status = readl(mm_gc->regs + ALTERA_GPIO_DATA);
status &= readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
generic_handle_irq(irq_find_mapping(irqdomain, i));
}
chained_irq_exit(chip, desc);
}
altera_gpio_probe() can be static Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 17:40:02 +08:00
static int altera_gpio_probe(struct platform_device *pdev)
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
{
struct device_node *node = pdev->dev.of_node;
int reg, ret;
struct altera_gpio_chip *altera_gc;
altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL);
if (!altera_gc)
return -ENOMEM;
spin_lock_init(&altera_gc->gpio_lock);
if (of_property_read_u32(node, "altr,ngpio", &reg))
/* By default assume maximum ngpio */
altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
else
altera_gc->mmchip.gc.ngpio = reg;
if (altera_gc->mmchip.gc.ngpio > ALTERA_GPIO_MAX_NGPIO) {
dev_warn(&pdev->dev,
"ngpio is greater than %d, defaulting to %d\n",
ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO);
altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
}
altera_gc->mmchip.gc.direction_input = altera_gpio_direction_input;
altera_gc->mmchip.gc.direction_output = altera_gpio_direction_output;
altera_gc->mmchip.gc.get = altera_gpio_get;
altera_gc->mmchip.gc.set = altera_gpio_set;
altera_gc->mmchip.gc.owner = THIS_MODULE;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
altera_gc->mmchip.gc.parent = &pdev->dev;
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
ret = of_mm_gpiochip_add(node, &altera_gc->mmchip);
if (ret) {
dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
return ret;
}
platform_set_drvdata(pdev, altera_gc);
altera_gc->mapped_irq = platform_get_irq(pdev, 0);
if (altera_gc->mapped_irq < 0)
goto skip_irq;
if (of_property_read_u32(node, "altr,interrupt-type", &reg)) {
ret = -EINVAL;
dev_err(&pdev->dev,
"altr,interrupt-type value not set in device tree\n");
goto teardown;
}
altera_gc->interrupt_trigger = reg;
ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0,
handle_simple_irq, IRQ_TYPE_NONE);
if (ret) {
dev_info(&pdev->dev, "could not add irqchip\n");
return ret;
}
gpiochip_set_chained_irqchip(&altera_gc->mmchip.gc,
&altera_irq_chip,
altera_gc->mapped_irq,
altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ?
altera_gpio_irq_leveL_high_handler :
altera_gpio_irq_edge_handler);
skip_irq:
return 0;
teardown:
pr_err("%s: registration failed with status %d\n",
node->full_name, ret);
return ret;
}
static int altera_gpio_remove(struct platform_device *pdev)
{
struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev);
gpio: altera: use of_mm_gpiochip_remove() to fix memory leak This driver calls of_mm_gpiochip_add() to add a memory mapped gpio chip. So, of_mm_gpiochip_remove() should be used when removing it. The direct call of gpiochip_remove() misses unmapping the register and freeing the label. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-17 19:59:42 +08:00
of_mm_gpiochip_remove(&altera_gc->mmchip);
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
gpio: altera: fix return value of altera_gpio_remove() The remove callback never succeeds, which seems odd. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-17 19:59:43 +08:00
return 0;
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
}
static const struct of_device_id altera_gpio_of_match[] = {
{ .compatible = "altr,pio-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, altera_gpio_of_match);
static struct platform_driver altera_gpio_driver = {
.driver = {
.name = "altera_gpio",
.of_match_table = of_match_ptr(altera_gpio_of_match),
},
.probe = altera_gpio_probe,
.remove = altera_gpio_remove,
};
static int __init altera_gpio_init(void)
{
return platform_driver_register(&altera_gpio_driver);
}
subsys_initcall(altera_gpio_init);
static void __exit altera_gpio_exit(void)
{
platform_driver_unregister(&altera_gpio_driver);
}
module_exit(altera_gpio_exit);
MODULE_AUTHOR("Tien Hock Loh <thloh@altera.com>");
MODULE_DESCRIPTION("Altera GPIO driver");
MODULE_LICENSE("GPL");
Copy Permalink