mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 12:14:01 +08:00
487 lines
12 KiB
C
487 lines
12 KiB
C
|
/*
|
||
|
* Broadcom BCM63xx SPI controller support
|
||
|
*
|
||
|
* Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
|
||
|
* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License
|
||
|
* as published by the Free Software Foundation; either version 2
|
||
|
* of the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the
|
||
|
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
||
|
*/
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/spi/spi.h>
|
||
|
#include <linux/completion.h>
|
||
|
#include <linux/err.h>
|
||
|
|
||
|
#include <bcm63xx_dev_spi.h>
|
||
|
|
||
|
#define PFX KBUILD_MODNAME
|
||
|
#define DRV_VER "0.1.2"
|
||
|
|
||
|
struct bcm63xx_spi {
|
||
|
spinlock_t lock;
|
||
|
int stopping;
|
||
|
struct completion done;
|
||
|
|
||
|
void __iomem *regs;
|
||
|
int irq;
|
||
|
|
||
|
/* Platform data */
|
||
|
u32 speed_hz;
|
||
|
unsigned fifo_size;
|
||
|
|
||
|
/* Data buffers */
|
||
|
const unsigned char *tx_ptr;
|
||
|
unsigned char *rx_ptr;
|
||
|
|
||
|
/* data iomem */
|
||
|
u8 __iomem *tx_io;
|
||
|
const u8 __iomem *rx_io;
|
||
|
|
||
|
int remaining_bytes;
|
||
|
|
||
|
struct clk *clk;
|
||
|
struct platform_device *pdev;
|
||
|
};
|
||
|
|
||
|
static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
|
||
|
unsigned int offset)
|
||
|
{
|
||
|
return bcm_readb(bs->regs + bcm63xx_spireg(offset));
|
||
|
}
|
||
|
|
||
|
static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
|
||
|
unsigned int offset)
|
||
|
{
|
||
|
return bcm_readw(bs->regs + bcm63xx_spireg(offset));
|
||
|
}
|
||
|
|
||
|
static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
|
||
|
u8 value, unsigned int offset)
|
||
|
{
|
||
|
bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
|
||
|
}
|
||
|
|
||
|
static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
|
||
|
u16 value, unsigned int offset)
|
||
|
{
|
||
|
bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
|
||
|
}
|
||
|
|
||
|
static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
|
||
|
{ 20000000, SPI_CLK_20MHZ },
|
||
|
{ 12500000, SPI_CLK_12_50MHZ },
|
||
|
{ 6250000, SPI_CLK_6_250MHZ },
|
||
|
{ 3125000, SPI_CLK_3_125MHZ },
|
||
|
{ 1563000, SPI_CLK_1_563MHZ },
|
||
|
{ 781000, SPI_CLK_0_781MHZ },
|
||
|
{ 391000, SPI_CLK_0_391MHZ }
|
||
|
};
|
||
|
|
||
|
static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
|
||
|
struct spi_transfer *t)
|
||
|
{
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
|
||
|
u8 bits_per_word;
|
||
|
u8 clk_cfg, reg;
|
||
|
u32 hz;
|
||
|
int i;
|
||
|
|
||
|
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
|
||
|
hz = (t) ? t->speed_hz : spi->max_speed_hz;
|
||
|
if (bits_per_word != 8) {
|
||
|
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
|
||
|
__func__, bits_per_word);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if (spi->chip_select > spi->master->num_chipselect) {
|
||
|
dev_err(&spi->dev, "%s, unsupported slave %d\n",
|
||
|
__func__, spi->chip_select);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/* Find the closest clock configuration */
|
||
|
for (i = 0; i < SPI_CLK_MASK; i++) {
|
||
|
if (hz <= bcm63xx_spi_freq_table[i][0]) {
|
||
|
clk_cfg = bcm63xx_spi_freq_table[i][1];
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* No matching configuration found, default to lowest */
|
||
|
if (i == SPI_CLK_MASK)
|
||
|
clk_cfg = SPI_CLK_0_391MHZ;
|
||
|
|
||
|
/* clear existing clock configuration bits of the register */
|
||
|
reg = bcm_spi_readb(bs, SPI_CLK_CFG);
|
||
|
reg &= ~SPI_CLK_MASK;
|
||
|
reg |= clk_cfg;
|
||
|
|
||
|
bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
|
||
|
dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
|
||
|
clk_cfg, hz);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* the spi->mode bits understood by this driver: */
|
||
|
#define MODEBITS (SPI_CPOL | SPI_CPHA)
|
||
|
|
||
|
static int bcm63xx_spi_setup(struct spi_device *spi)
|
||
|
{
|
||
|
struct bcm63xx_spi *bs;
|
||
|
int ret;
|
||
|
|
||
|
bs = spi_master_get_devdata(spi->master);
|
||
|
|
||
|
if (bs->stopping)
|
||
|
return -ESHUTDOWN;
|
||
|
|
||
|
if (!spi->bits_per_word)
|
||
|
spi->bits_per_word = 8;
|
||
|
|
||
|
if (spi->mode & ~MODEBITS) {
|
||
|
dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
|
||
|
__func__, spi->mode & ~MODEBITS);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
ret = bcm63xx_spi_setup_transfer(spi, NULL);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
|
||
|
spi->mode & ~MODEBITS);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
|
||
|
__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Fill the TX FIFO with as many bytes as possible */
|
||
|
static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
|
||
|
{
|
||
|
u8 size;
|
||
|
|
||
|
/* Fill the Tx FIFO with as many bytes as possible */
|
||
|
size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
|
||
|
bs->fifo_size;
|
||
|
memcpy_toio(bs->tx_io, bs->tx_ptr, size);
|
||
|
bs->remaining_bytes -= size;
|
||
|
}
|
||
|
|
||
|
static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
|
||
|
{
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
|
||
|
u16 msg_ctl;
|
||
|
u16 cmd;
|
||
|
|
||
|
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
|
||
|
t->tx_buf, t->rx_buf, t->len);
|
||
|
|
||
|
/* Transmitter is inhibited */
|
||
|
bs->tx_ptr = t->tx_buf;
|
||
|
bs->rx_ptr = t->rx_buf;
|
||
|
init_completion(&bs->done);
|
||
|
|
||
|
if (t->tx_buf) {
|
||
|
bs->remaining_bytes = t->len;
|
||
|
bcm63xx_spi_fill_tx_fifo(bs);
|
||
|
}
|
||
|
|
||
|
/* Enable the command done interrupt which
|
||
|
* we use to determine completion of a command */
|
||
|
bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
|
||
|
|
||
|
/* Fill in the Message control register */
|
||
|
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
|
||
|
|
||
|
if (t->rx_buf && t->tx_buf)
|
||
|
msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
|
||
|
else if (t->rx_buf)
|
||
|
msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
|
||
|
else if (t->tx_buf)
|
||
|
msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
|
||
|
|
||
|
bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
|
||
|
|
||
|
/* Issue the transfer */
|
||
|
cmd = SPI_CMD_START_IMMEDIATE;
|
||
|
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
|
||
|
cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
|
||
|
bcm_spi_writew(bs, cmd, SPI_CMD);
|
||
|
wait_for_completion(&bs->done);
|
||
|
|
||
|
/* Disable the CMD_DONE interrupt */
|
||
|
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
|
||
|
|
||
|
return t->len - bs->remaining_bytes;
|
||
|
}
|
||
|
|
||
|
static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
|
||
|
{
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
|
||
|
struct spi_transfer *t;
|
||
|
int ret = 0;
|
||
|
|
||
|
if (unlikely(list_empty(&m->transfers)))
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (bs->stopping)
|
||
|
return -ESHUTDOWN;
|
||
|
|
||
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
||
|
ret += bcm63xx_txrx_bufs(spi, t);
|
||
|
}
|
||
|
|
||
|
m->complete(m->context);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* This driver supports single master mode only. Hence
|
||
|
* CMD_DONE is the only interrupt we care about
|
||
|
*/
|
||
|
static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
|
||
|
{
|
||
|
struct spi_master *master = (struct spi_master *)dev_id;
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
||
|
u8 intr;
|
||
|
u16 cmd;
|
||
|
|
||
|
/* Read interupts and clear them immediately */
|
||
|
intr = bcm_spi_readb(bs, SPI_INT_STATUS);
|
||
|
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
|
||
|
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
|
||
|
|
||
|
/* A tansfer completed */
|
||
|
if (intr & SPI_INTR_CMD_DONE) {
|
||
|
u8 rx_tail;
|
||
|
|
||
|
rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
|
||
|
|
||
|
/* Read out all the data */
|
||
|
if (rx_tail)
|
||
|
memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
|
||
|
|
||
|
/* See if there is more data to send */
|
||
|
if (bs->remaining_bytes > 0) {
|
||
|
bcm63xx_spi_fill_tx_fifo(bs);
|
||
|
|
||
|
/* Start the transfer */
|
||
|
bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
|
||
|
SPI_MSG_CTL);
|
||
|
cmd = bcm_spi_readw(bs, SPI_CMD);
|
||
|
cmd |= SPI_CMD_START_IMMEDIATE;
|
||
|
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
|
||
|
bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
|
||
|
bcm_spi_writew(bs, cmd, SPI_CMD);
|
||
|
} else {
|
||
|
complete(&bs->done);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
|
||
|
static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct resource *r;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
|
||
|
int irq;
|
||
|
struct spi_master *master;
|
||
|
struct clk *clk;
|
||
|
struct bcm63xx_spi *bs;
|
||
|
int ret;
|
||
|
|
||
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
if (!r) {
|
||
|
dev_err(dev, "no iomem\n");
|
||
|
ret = -ENXIO;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
irq = platform_get_irq(pdev, 0);
|
||
|
if (irq < 0) {
|
||
|
dev_err(dev, "no irq\n");
|
||
|
ret = -ENXIO;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
clk = clk_get(dev, "spi");
|
||
|
if (IS_ERR(clk)) {
|
||
|
dev_err(dev, "no clock for device\n");
|
||
|
ret = PTR_ERR(clk);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
master = spi_alloc_master(dev, sizeof(*bs));
|
||
|
if (!master) {
|
||
|
dev_err(dev, "out of memory\n");
|
||
|
ret = -ENOMEM;
|
||
|
goto out_clk;
|
||
|
}
|
||
|
|
||
|
bs = spi_master_get_devdata(master);
|
||
|
init_completion(&bs->done);
|
||
|
|
||
|
platform_set_drvdata(pdev, master);
|
||
|
bs->pdev = pdev;
|
||
|
|
||
|
if (!devm_request_mem_region(&pdev->dev, r->start,
|
||
|
resource_size(r), PFX)) {
|
||
|
dev_err(dev, "iomem request failed\n");
|
||
|
ret = -ENXIO;
|
||
|
goto out_err;
|
||
|
}
|
||
|
|
||
|
bs->regs = devm_ioremap_nocache(&pdev->dev, r->start,
|
||
|
resource_size(r));
|
||
|
if (!bs->regs) {
|
||
|
dev_err(dev, "unable to ioremap regs\n");
|
||
|
ret = -ENOMEM;
|
||
|
goto out_err;
|
||
|
}
|
||
|
|
||
|
bs->irq = irq;
|
||
|
bs->clk = clk;
|
||
|
bs->fifo_size = pdata->fifo_size;
|
||
|
|
||
|
ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
|
||
|
pdev->name, master);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "unable to request irq\n");
|
||
|
goto out_err;
|
||
|
}
|
||
|
|
||
|
master->bus_num = pdata->bus_num;
|
||
|
master->num_chipselect = pdata->num_chipselect;
|
||
|
master->setup = bcm63xx_spi_setup;
|
||
|
master->transfer = bcm63xx_transfer;
|
||
|
bs->speed_hz = pdata->speed_hz;
|
||
|
bs->stopping = 0;
|
||
|
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
|
||
|
bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
|
||
|
spin_lock_init(&bs->lock);
|
||
|
|
||
|
/* Initialize hardware */
|
||
|
clk_enable(bs->clk);
|
||
|
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
|
||
|
|
||
|
/* register and we are done */
|
||
|
ret = spi_register_master(master);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "spi register failed\n");
|
||
|
goto out_clk_disable;
|
||
|
}
|
||
|
|
||
|
dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
|
||
|
r->start, irq, bs->fifo_size, DRV_VER);
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
out_clk_disable:
|
||
|
clk_disable(clk);
|
||
|
out_err:
|
||
|
platform_set_drvdata(pdev, NULL);
|
||
|
spi_master_put(master);
|
||
|
out_clk:
|
||
|
clk_put(clk);
|
||
|
out:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct spi_master *master = platform_get_drvdata(pdev);
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
||
|
|
||
|
/* reset spi block */
|
||
|
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
|
||
|
spin_lock(&bs->lock);
|
||
|
bs->stopping = 1;
|
||
|
|
||
|
/* HW shutdown */
|
||
|
clk_disable(bs->clk);
|
||
|
clk_put(bs->clk);
|
||
|
|
||
|
spin_unlock(&bs->lock);
|
||
|
platform_set_drvdata(pdev, 0);
|
||
|
spi_unregister_master(master);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_PM
|
||
|
static int bcm63xx_spi_suspend(struct device *dev)
|
||
|
{
|
||
|
struct spi_master *master =
|
||
|
platform_get_drvdata(to_platform_device(dev));
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
||
|
|
||
|
clk_disable(bs->clk);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bcm63xx_spi_resume(struct device *dev)
|
||
|
{
|
||
|
struct spi_master *master =
|
||
|
platform_get_drvdata(to_platform_device(dev));
|
||
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
||
|
|
||
|
clk_enable(bs->clk);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
|
||
|
.suspend = bcm63xx_spi_suspend,
|
||
|
.resume = bcm63xx_spi_resume,
|
||
|
};
|
||
|
|
||
|
#define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops)
|
||
|
#else
|
||
|
#define BCM63XX_SPI_PM_OPS NULL
|
||
|
#endif
|
||
|
|
||
|
static struct platform_driver bcm63xx_spi_driver = {
|
||
|
.driver = {
|
||
|
.name = "bcm63xx-spi",
|
||
|
.owner = THIS_MODULE,
|
||
|
.pm = BCM63XX_SPI_PM_OPS,
|
||
|
},
|
||
|
.probe = bcm63xx_spi_probe,
|
||
|
.remove = __devexit_p(bcm63xx_spi_remove),
|
||
|
};
|
||
|
|
||
|
module_platform_driver(bcm63xx_spi_driver);
|
||
|
|
||
|
MODULE_ALIAS("platform:bcm63xx_spi");
|
||
|
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
|
||
|
MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
|
||
|
MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
|
||
|
MODULE_LICENSE("GPL");
|