renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
f4e2dd53d5
linux-next/arch/cris/Kconfig

563 lines
13 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config MMU
bool
default y
[PATCH] optional ZONE_DMA: introduce CONFIG_ZONE_DMA This patch simply defines CONFIG_ZONE_DMA for all arches. We later do special things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work without ZONE_DMA. CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture handles ISA DMA. First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch needs ZONE_DMA because ISA DMA devices are supported. We can catch this in mm/Kconfig and do not need to modify arch code. Second, arches may use ZONE_DMA in an unknown way. We set CONFIG_ZONE_DMA for all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards compatibility. The arches may later undefine ZONE_DMA if their arch code has been verified to not depend on ZONE_DMA. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:43:09 +08:00
config ZONE_DMA
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config RWSEM_GENERIC_SPINLOCK
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
[PATCH] LOG2: Implement a general integer log2 facility in the kernel This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 18:37:49 +08:00
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
[PATCH] bitops: cris: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove generic_fls() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove sched_find_first_bit() Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 17:39:21 +08:00
config GENERIC_HWEIGHT
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config GENERIC_CALIBRATE_DELAY
bool
default y
[PATCH] sort the devres mess out * Split the implementation-agnostic stuff in separate files. * Make sure that targets using non-default request_irq() pull kernel/irq/devres.o * Introduce new symbols (HAS_IOPORT and HAS_IOMEM) defaulting to positive; allow architectures to turn them off (we needed these symbols anyway for dependencies of quite a few drivers). * protect the ioport-related parts of lib/devres.o with CONFIG_HAS_IOPORT. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 23:41:31 +08:00
config NO_IOPORT
def_bool y
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
config FORCE_MAX_ZONEORDER
int
default 6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config CRIS
bool
default y
ide: introduce HAVE_IDE To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09 17:46:40 +08:00
select HAVE_IDE
cris: select GENERIC_ATOMIC64 Cris doesn't implement atomic64 operations neither, should select GENERIC_ATOMIC64. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 06:06:15 +08:00
select GENERIC_ATOMIC64
Kconfig: clean up the long arch list for the UID16 config option Introduce HAVE_UID16 config option and select it in corresponding architecture Kconfig files. UID16 now only depends on HAVE_UID16. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:28:08 +08:00
select HAVE_UID16
Select VIRT_TO_BUS directly where needed In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-07 12:48:16 +08:00
select VIRT_TO_BUS
ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 05:42:46 +08:00
select ARCH_WANT_IPC_PARSE_VERSION
cris: Use generic show_interrupts() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com>
2011-03-17 20:39:19 +08:00
select GENERIC_IRQ_SHOW
lib: move GENERIC_IOMAP to lib/Kconfig define GENERIC_IOMAP in a central location instead of all architectures. This will be helpful for the follow-up patch which makes it select other configs. Code is also a bit shorter this way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-11-24 20:54:28 +08:00
select GENERIC_IOMAP
cris: Use generic idle thread allocation Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Link: http://lkml.kernel.org/r/20120420124557.789657793@linutronix.de
2012-04-20 21:05:53 +08:00
select GENERIC_SMP_IDLE_THREAD if ETRAX_ARCH_V32
cris: Use generic time config Signed-off-by: Anna-Maria Gleixner <anna-maria@glx-um.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Link: http://lkml.kernel.org/r/20120518163105.286556794@glx-um.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-19 00:45:46 +08:00
select GENERIC_CMOS_UPDATE
Make most arch asm/module.h files use asm-generic/module.h Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela, ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version into asm-generic/module.h for all arches bar MIPS. Also, use the generic definition mod_arch_specific where possible. To this end, I've defined three new config bools: (*) HAVE_MOD_ARCH_SPECIFIC Arches define this if they don't want to use the empty generic mod_arch_specific struct. (*) MODULES_USE_ELF_RELA Arches define this if their modules can contain RELA records. This causes the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be defined by the arch rather than have the core emit an error message. (*) MODULES_USE_ELF_REL Arches define this if their modules can contain REL records. This causes the Elf_Rel mapping to be emitted and allows apply_relocate() to be defined by the arch rather than have the core emit an error message. Note that it is possible to allow both REL and RELA records: m68k and mips are two arches that do this. With this, some arch asm/module.h files can be deleted entirely and replaced with a generic-y marker in the arch Kbuild file. Additionally, I have removed the bits from m32r and score that handle the unsupported type of relocation record as that's now handled centrally. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 13:01:03 +08:00
select MODULES_USE_ELF_RELA
cris: switch to generic fork/vfork/clone same braindamage as on s390 - the first two arguments of clone(2) in the wrong order. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-27 03:15:13 +08:00
select CLONE_BACKWARDS2
cris: switch to generic old sigsuspend Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 05:28:27 +08:00
select OLD_SIGSUSPEND
cris: switch to generic old sigaction() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 08:30:53 +08:00
select OLD_SIGACTION
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
avoid overflows in kernel/time.c When the conversion factor between jiffies and milli- or microseconds is not a single multiply or divide, as for the case of HZ == 300, we currently do a multiply followed by a divide. The intervening result, however, is subject to overflows, especially since the fraction is not simplified (for HZ == 300, we multiply by 300 and divide by 1000). This is exposed to the user when passing a large timeout to poll(), for example. This patch replaces the multiply-divide with a reciprocal multiplication on 32-bit platforms. When the input is an unsigned long, there is no portable way to do this on 64-bit platforms there is no portable way to do this since it requires a 128-bit intermediate result (which gcc does support on 64-bit platforms but may generate libgcc calls, e.g. on 64-bit s390), but since the output is a 32-bit integer in the cases affected, just simplify the multiply-divide (*3/10 instead of *300/1000). The reciprocal multiply used can have off-by-one errors in the upper half of the valid output range. This could be avoided at the expense of having to deal with a potential 65-bit intermediate result. Since the intent is to avoid overflow problems and most of the other time conversions are only semiexact, the off-by-one errors were considered an acceptable tradeoff. At Ralf Baechle's suggestion, this version uses a Perl script to compute the necessary constants. We already have dependencies on Perl for kernel compiles. This does, however, require the Perl module Math::BigInt, which is included in the standard Perl distribution starting with version 5.8.0. In order to support older versions of Perl, include a table of canned constants in the script itself, and structure the script so that Math::BigInt isn't required if pulling values from said table. Running the script requires that the HZ value is available from the Makefile. Thus, this patch also adds the Kconfig variable CONFIG_HZ to the architectures which didn't already have it (alpha, cris, frv, h8300, m32r, m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or sh64 architectures, since Paul Mundt has dealt with those separately in the sh tree. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Richard Henderson <rth@twiddle.net>, Cc: Michael Starvik <starvik@axis.com>, Cc: David Howells <dhowells@redhat.com>, Cc: Yoshinori Sato <ysato@users.sourceforge.jp>, Cc: Hirokazu Takata <takata@linux-m32r.org>, Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Cc: Roman Zippel <zippel@linux-m68k.org>, Cc: William L. Irwin <sparclinux@vger.kernel.org>, Cc: Chris Zankel <chris@zankel.net>, Cc: H. Peter Anvin <hpa@zytor.com>, Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 20:21:26 +08:00
config HZ
int
default 100
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "init/Kconfig"
container freezer: implement freezer cgroup subsystem This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 11:27:21 +08:00
source "kernel/Kconfig.freezer"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
menu "General setup"
source "fs/Kconfig.binfmt"
config ETRAX_CMDLINE
string "Kernel command line"
default "root=/dev/mtdblock3"
help
Pass additional commands to the kernel.
config ETRAX_WATCHDOG
bool "Enable ETRAX watchdog"
help
Enable the built-in watchdog timer support on ETRAX based embedded
network computers.
config ETRAX_WATCHDOG_NICE_DOGGY
bool "Disable watchdog during Oops printouts"
depends on ETRAX_WATCHDOG
help
By enabling this you make sure that the watchdog does not bite while
printing oopses. Recommended for development systems but not for
production releases.
config ETRAX_FAST_TIMER
bool "Enable ETRAX fast timer API"
help
This options enables the API to a fast timer implementation using
timer1 to get sub jiffie resolution timers (primarily one-shot
timers).
This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
config ETRAX_KMALLOCED_MODULES
bool "Enable module allocation with kmalloc"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
Enable module allocation with kmalloc instead of vmalloc.
source "kernel/Kconfig.preempt"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] make each arch use mm/Kconfig For all architectures, this just means that you'll see a "Memory Model" choice in your architecture menu. For those that implement DISCONTIGMEM, you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool y" and make your users select DISCONTIGMEM right out of the new choice menu. The only disadvantage might be if you have some specific things that you need in your help option to explain something about DISCONTIGMEM. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 15:07:43 +08:00
source mm/Kconfig
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
menu "Hardware setup"
choice
prompt "Processor type"
default ETRAX100LX
config ETRAX100LX
bool "ETRAX-100LX-v1"
CRIS: GENERIC_TIME fixes GENERIC_TIME was not functional for CRIS, giving random backward time jumps. For CRISv32 implement a new clocksource using the free running counter and ditch the arch_gettimeoffset. The random time jumps still existed, but turned out to be the write_seqlock which was missing around our do_timer() call. So switch over to GENERIC_TIME using the clocksource for CRISv32. CRISv10 doesn't have the free running counter needed for the clocksource trick, but we can still use GENERIC_TIME with arch_gettimeoffset. Unfortunately, there were problems in using the prescaler register to timer0 for the gettimeoffset calculation, so it is now ignored, making our resolution worse by the tune of 40usec (0.4%) worst case. At the same time, clean up some formatting and use NSEC_PER_SEC instead of 1000000000. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-07-30 23:33:07 +08:00
select ARCH_USES_GETTIMEOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Support version 1 of the ETRAX 100LX.
config ETRAX100LX_V2
bool "ETRAX-100LX-v2"
CRIS: GENERIC_TIME fixes GENERIC_TIME was not functional for CRIS, giving random backward time jumps. For CRISv32 implement a new clocksource using the free running counter and ditch the arch_gettimeoffset. The random time jumps still existed, but turned out to be the write_seqlock which was missing around our do_timer() call. So switch over to GENERIC_TIME using the clocksource for CRISv32. CRISv10 doesn't have the free running counter needed for the clocksource trick, but we can still use GENERIC_TIME with arch_gettimeoffset. Unfortunately, there were problems in using the prescaler register to timer0 for the gettimeoffset calculation, so it is now ignored, making our resolution worse by the tune of 40usec (0.4%) worst case. At the same time, clean up some formatting and use NSEC_PER_SEC instead of 1000000000. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-07-30 23:33:07 +08:00
select ARCH_USES_GETTIMEOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Support version 2 of the ETRAX 100LX.
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
config ETRAXFS
bool "ETRAX-FS-V32"
help
Support CRIS V32.
config CRIS_MACH_ARTPEC3
bool "ARTPEC-3"
help
Support Axis ARTPEC-3.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endchoice
config ETRAX_ARCH_V10
bool
default y if ETRAX100LX || ETRAX100LX_V2
default n if !(ETRAX100LX || ETRAX100LX_V2)
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
config ETRAX_ARCH_V32
bool
default y if (ETRAXFS || CRIS_MACH_ARTPEC3)
default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config ETRAX_DRAM_SIZE
int "DRAM size (dec, in MB)"
default "8"
help
Size of DRAM (decimal in MB) typically 2, 8 or 16.
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
config ETRAX_VMEM_SIZE
int "Video memory size (dec, in MB)"
depends on ETRAX_ARCH_V32 && !ETRAXFS
default 8 if !ETRAXFS
help
Size of Video accessible memory (decimal, in MB).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config ETRAX_FLASH_BUSWIDTH
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
int "Buswidth of NOR flash in bytes"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default "2"
help
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
config ETRAX_FLASH1_SIZE
int "FLASH1 size (dec, in MB. 0 = Unknown)"
default "0"
choice
prompt "Product debug-port"
default ETRAX_DEBUG_PORT0
config ETRAX_DEBUG_PORT0
bool "Serial-0"
help
Choose a serial port for the ETRAX debug console. Default to
port 0.
config ETRAX_DEBUG_PORT1
bool "Serial-1"
help
Use serial port 1 for the console.
config ETRAX_DEBUG_PORT2
bool "Serial-2"
help
Use serial port 2 for the console.
config ETRAX_DEBUG_PORT3
bool "Serial-3"
help
Use serial port 3 for the console.
config ETRAX_DEBUG_PORT_NULL
bool "disabled"
help
Disable serial-port debugging.
endchoice
choice
prompt "Kernel GDB port"
depends on ETRAX_KGDB
default ETRAX_KGDB_PORT0
help
Choose a serial port for kernel debugging. NOTE: This port should
not be enabled under Drivers for built-in interfaces (as it has its
own initialization code) and should not be the same as the debug port.
config ETRAX_KGDB_PORT0
bool "Serial-0"
help
Use serial port 0 for kernel debugging.
config ETRAX_KGDB_PORT1
bool "Serial-1"
help
Use serial port 1 for kernel debugging.
config ETRAX_KGDB_PORT2
bool "Serial-2"
help
Use serial port 2 for kernel debugging.
config ETRAX_KGDB_PORT3
bool "Serial-3"
help
Use serial port 3 for kernel debugging.
endchoice
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source arch/cris/arch-v10/Kconfig
CRIS: avoid using arch links in Kconfig Improve including of architecture dependent Kconfig files. - Always include the architecture dependent Kconfig files. - Wrap architecture dependent Kconfig files inside an appropriate "if ETRAX_ARCH_Vxx" block. This makes it possible to run the configuration even without the arch links, which are created later in the build process. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:30:31 +08:00
source arch/cris/arch-v32/Kconfig
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
[NET]: add a top-level Networking menu to *config Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers/*/Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-12 12:03:49 +08:00
source "net/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# bring in ETRAX built-in drivers
menu "Drivers for built-in interfaces"
CRIS: avoid using arch links in Kconfig Improve including of architecture dependent Kconfig files. - Always include the architecture dependent Kconfig files. - Wrap architecture dependent Kconfig files inside an appropriate "if ETRAX_ARCH_Vxx" block. This makes it possible to run the configuration even without the arch links, which are created later in the build process. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:30:31 +08:00
source arch/cris/arch-v10/drivers/Kconfig
source arch/cris/arch-v32/drivers/Kconfig
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CRIS: Move ETRAX_AXISFLASHMAP to common Kconfig file.
2008-02-06 20:21:28 +08:00
config ETRAX_AXISFLASHMAP
bool "Axis flash-map support"
select MTD
select MTD_CFI
select MTD_CFI_AMDSTD
select MTD_JEDECPROBE if ETRAX_ARCH_V32
select MTD_BLOCK
select MTD_COMPLEX_MAPPINGS
help
This option enables MTD mapping of flash devices. Needed to use
flash memories. If unsure, say Y.
CRIS v10: Add synchronous serial port driver for CRIS v10.
2008-01-21 18:44:11 +08:00
config ETRAX_SYNCHRONOUS_SERIAL
bool "Synchronous serial-port support"
help
Select this to enable the synchronous serial port driver.
config ETRAX_SYNCHRONOUS_SERIAL_PORT0
bool "Synchronous serial port 0 enabled"
depends on ETRAX_SYNCHRONOUS_SERIAL
help
Enabled synchronous serial port 0.
config ETRAX_SYNCHRONOUS_SERIAL0_DMA
bool "Enable DMA on synchronous serial port 0."
depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
help
A synchronous serial port can run in manual or DMA mode.
Selecting this option will make it run in DMA mode.
config ETRAX_SYNCHRONOUS_SERIAL_PORT1
bool "Synchronous serial port 1 enabled"
depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
help
Enabled synchronous serial port 1.
config ETRAX_SYNCHRONOUS_SERIAL1_DMA
bool "Enable DMA on synchronous serial port 1."
depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
help
A synchronous serial port can run in manual or DMA mode.
Selecting this option will make it run in DMA mode.
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
choice
prompt "Network LED behavior"
depends on ETRAX_ETHERNET
default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
config ETRAX_NETWORK_LED_ON_WHEN_LINK
bool "LED_on_when_link"
help
Selecting LED_on_when_link will light the LED when there is a
connection and will flash off when there is activity.
Selecting LED_on_when_activity will light the LED only when
there is activity.
This setting will also affect the behaviour of other activity LEDs
e.g. Bluetooth.
config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
bool "LED_on_when_activity"
help
Selecting LED_on_when_link will light the LED when there is a
connection and will flash off when there is activity.
Selecting LED_on_when_activity will light the LED only when
there is activity.
This setting will also affect the behaviour of other activity LEDs
e.g. Bluetooth.
endchoice
choice
prompt "Ser0 DMA out channel"
depends on ETRAX_SERIAL_PORT0
default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10
config ETRAX_SERIAL_PORT0_NO_DMA_OUT
bool "Ser0 uses no DMA for output"
help
Do not use DMA for ser0 output.
config ETRAX_SERIAL_PORT0_DMA6_OUT
bool "Ser0 uses DMA6 for output"
depends on ETRAXFS
help
Enables the DMA6 output channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
used when transmitting data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
config ETRAX_SERIAL_PORT0_DMA0_OUT
bool "Ser0 uses DMA0 for output"
depends on CRIS_MACH_ARTPEC3
help
Enables the DMA0 output channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
used when transmitting data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
endchoice
choice
prompt "Ser0 DMA in channel "
depends on ETRAX_SERIAL_PORT0
default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10
help
What DMA channel to use for ser0.
config ETRAX_SERIAL_PORT0_NO_DMA_IN
bool "Ser0 uses no DMA for input"
help
Do not use DMA for ser0 input.
config ETRAX_SERIAL_PORT0_DMA7_IN
bool "Ser0 uses DMA7 for input"
depends on ETRAXFS
help
Enables the DMA7 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
config ETRAX_SERIAL_PORT0_DMA1_IN
bool "Ser0 uses DMA1 for input"
depends on CRIS_MACH_ARTPEC3
help
Enables the DMA1 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
trivial: fix typos/grammar errors in Kconfig texts Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-26 18:12:25 +08:00
used when receiving data.
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
Normally you want to use DMA, unless you use the DMA channel for
something else.
endchoice
choice
prompt "Ser1 DMA in channel "
depends on ETRAX_SERIAL_PORT1
default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10
help
What DMA channel to use for ser1.
config ETRAX_SERIAL_PORT1_NO_DMA_IN
bool "Ser1 uses no DMA for input"
help
Do not use DMA for ser1 input.
config ETRAX_SERIAL_PORT1_DMA5_IN
bool "Ser1 uses DMA5 for input"
depends on ETRAX_ARCH_V32
help
Enables the DMA5 input channel for ser1 (ttyS1).
If you do not enable DMA, an interrupt for each character will be
used when receiving data.
Normally you want this on, unless you use the DMA channel for
something else.
config ETRAX_SERIAL_PORT1_DMA9_IN
depends on ETRAX_ARCH_V10
bool "Ser1 uses DMA9 for input"
endchoice
choice
prompt "Ser1 DMA out channel"
depends on ETRAX_SERIAL_PORT1
default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10
help
What DMA channel to use for ser1.
config ETRAX_SERIAL_PORT1_NO_DMA_OUT
bool "Ser1 uses no DMA for output"
help
Do not use DMA for ser1 output.
config ETRAX_SERIAL_PORT1_DMA8_OUT
depends on ETRAX_ARCH_V10
bool "Ser1 uses DMA8 for output"
config ETRAX_SERIAL_PORT1_DMA4_OUT
depends on ETRAX_ARCH_V32
bool "Ser1 uses DMA4 for output"
help
Enables the DMA4 output channel for ser1 (ttyS1).
If you do not enable DMA, an interrupt for each character will be
used when transmitting data.
Normally you want this on, unless you use the DMA channel for
something else.
endchoice
choice
prompt "Ser2 DMA out channel"
depends on ETRAX_SERIAL_PORT2
default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10
config ETRAX_SERIAL_PORT2_NO_DMA_OUT
bool "Ser2 uses no DMA for output"
help
Do not use DMA for ser2 output.
config ETRAX_SERIAL_PORT2_DMA2_OUT
bool "Ser2 uses DMA2 for output"
depends on ETRAXFS || ETRAX_ARCH_V10
help
Enables the DMA2 output channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
used when transmitting data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
config ETRAX_SERIAL_PORT2_DMA6_OUT
bool "Ser2 uses DMA6 for output"
depends on CRIS_MACH_ARTPEC3
help
Enables the DMA6 output channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
used when transmitting data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
endchoice
choice
prompt "Ser2 DMA in channel"
depends on ETRAX_SERIAL_PORT2
default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10
help
What DMA channel to use for ser2.
config ETRAX_SERIAL_PORT2_NO_DMA_IN
bool "Ser2 uses no DMA for input"
help
Do not use DMA for ser2 input.
config ETRAX_SERIAL_PORT2_DMA3_IN
bool "Ser2 uses DMA3 for input"
depends on ETRAXFS || ETRAX_ARCH_V10
help
Enables the DMA3 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
config ETRAX_SERIAL_PORT2_DMA7_IN
bool "Ser2 uses DMA7 for input"
depends on CRIS_MACH_ARTPEC3
help
Enables the DMA7 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
trivial: fix typos/grammar errors in Kconfig texts Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-26 18:12:25 +08:00
used when receiving data.
CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. - Remove some unneeded configs and add some new ones. - Merge common config items to common file instead of duplicating them. - Pull in standard Kconfig.preempt. - Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci) - Rename CRISv32 config items which had different types from CRISv10. (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT, ETRAX_I2C_CLK_PORT)
2007-12-06 01:10:36 +08:00
Normally you want to use DMA, unless you use the DMA channel for
something else.
endchoice
choice
prompt "Ser3 DMA in channel"
depends on ETRAX_SERIAL_PORT3
default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10
help
What DMA channel to use for ser3.
config ETRAX_SERIAL_PORT3_NO_DMA_IN
bool "Ser3 uses no DMA for input"
help
Do not use DMA for ser3 input.
config ETRAX_SERIAL_PORT3_DMA5_IN
depends on ETRAX_ARCH_V10
bool "DMA 5"
endchoice
choice
prompt "Ser3 DMA out channel"
depends on ETRAX_SERIAL_PORT3
default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32
default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10
config ETRAX_SERIAL_PORT3_NO_DMA_OUT
bool "Ser3 uses no DMA for output"
help
Do not use DMA for ser3 output.
config ETRAX_SERIAL_PORT3_DMA4_OUT
depends on ETRAX_ARCH_V10
bool "DMA 4"
endchoice
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
cris: Switch cris to drivers/Kconfig allmodconfig: drivers/video/console/fonts.c:71:2: error: #error No fonts configured. This is caused by cris not using the generic drivers/Kconfig, and thus not traversing drivers/video/console/Kconfig. As the build system does traverse drivers/video/console/Makefile, fonts.c was compiled with an inconsistent configuration. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-05-14 19:54:21 +08:00
source "drivers/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "fs/Kconfig"
source "arch/cris/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
Copy Permalink