2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 17:23:55 +08:00
linux-next/drivers/gpio/gpio-adnp.c

547 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (C) 2011-2012 Avionic Design GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_irq.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#define GPIO_DDR(gpio) (0x00 << (gpio)->reg_shift)
#define GPIO_PLR(gpio) (0x01 << (gpio)->reg_shift)
#define GPIO_IER(gpio) (0x02 << (gpio)->reg_shift)
#define GPIO_ISR(gpio) (0x03 << (gpio)->reg_shift)
#define GPIO_PTR(gpio) (0x04 << (gpio)->reg_shift)
struct adnp {
struct i2c_client *client;
struct gpio_chip gpio;
unsigned int reg_shift;
struct mutex i2c_lock;
struct mutex irq_lock;
u8 *irq_enable;
u8 *irq_level;
u8 *irq_rise;
u8 *irq_fall;
u8 *irq_high;
u8 *irq_low;
};
static int adnp_read(struct adnp *adnp, unsigned offset, uint8_t *value)
{
int err;
err = i2c_smbus_read_byte_data(adnp->client, offset);
if (err < 0) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
dev_err(adnp->gpio.parent, "%s failed: %d\n",
"i2c_smbus_read_byte_data()", err);
return err;
}
*value = err;
return 0;
}
static int adnp_write(struct adnp *adnp, unsigned offset, uint8_t value)
{
int err;
err = i2c_smbus_write_byte_data(adnp->client, offset, value);
if (err < 0) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
dev_err(adnp->gpio.parent, "%s failed: %d\n",
"i2c_smbus_write_byte_data()", err);
return err;
}
return 0;
}
static int adnp_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct adnp *adnp = gpiochip_get_data(chip);
unsigned int reg = offset >> adnp->reg_shift;
unsigned int pos = offset & 7;
u8 value;
int err;
err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &value);
if (err < 0)
return err;
return (value & BIT(pos)) ? 1 : 0;
}
static void __adnp_gpio_set(struct adnp *adnp, unsigned offset, int value)
{
unsigned int reg = offset >> adnp->reg_shift;
unsigned int pos = offset & 7;
int err;
u8 val;
err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &val);
if (err < 0)
return;
if (value)
val |= BIT(pos);
else
val &= ~BIT(pos);
adnp_write(adnp, GPIO_PLR(adnp) + reg, val);
}
static void adnp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct adnp *adnp = gpiochip_get_data(chip);
mutex_lock(&adnp->i2c_lock);
__adnp_gpio_set(adnp, offset, value);
mutex_unlock(&adnp->i2c_lock);
}
static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct adnp *adnp = gpiochip_get_data(chip);
unsigned int reg = offset >> adnp->reg_shift;
unsigned int pos = offset & 7;
u8 value;
int err;
mutex_lock(&adnp->i2c_lock);
err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
if (err < 0)
goto out;
value &= ~BIT(pos);
err = adnp_write(adnp, GPIO_DDR(adnp) + reg, value);
if (err < 0)
goto out;
err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
if (err < 0)
goto out;
if (err & BIT(pos))
err = -EACCES;
err = 0;
out:
mutex_unlock(&adnp->i2c_lock);
return err;
}
static int adnp_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
struct adnp *adnp = gpiochip_get_data(chip);
unsigned int reg = offset >> adnp->reg_shift;
unsigned int pos = offset & 7;
int err;
u8 val;
mutex_lock(&adnp->i2c_lock);
err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
if (err < 0)
goto out;
val |= BIT(pos);
err = adnp_write(adnp, GPIO_DDR(adnp) + reg, val);
if (err < 0)
goto out;
err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
if (err < 0)
goto out;
if (!(val & BIT(pos))) {
err = -EPERM;
goto out;
}
__adnp_gpio_set(adnp, offset, value);
err = 0;
out:
mutex_unlock(&adnp->i2c_lock);
return err;
}
static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct adnp *adnp = gpiochip_get_data(chip);
unsigned int num_regs = 1 << adnp->reg_shift, i, j;
int err;
for (i = 0; i < num_regs; i++) {
u8 ddr, plr, ier, isr;
mutex_lock(&adnp->i2c_lock);
err = adnp_read(adnp, GPIO_DDR(adnp) + i, &ddr);
if (err < 0)
goto unlock;
err = adnp_read(adnp, GPIO_PLR(adnp) + i, &plr);
if (err < 0)
goto unlock;
err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
if (err < 0)
goto unlock;
err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
if (err < 0)
goto unlock;
mutex_unlock(&adnp->i2c_lock);
for (j = 0; j < 8; j++) {
unsigned int bit = (i << adnp->reg_shift) + j;
const char *direction = "input ";
const char *level = "low ";
const char *interrupt = "disabled";
const char *pending = "";
if (ddr & BIT(j))
direction = "output";
if (plr & BIT(j))
level = "high";
if (ier & BIT(j))
interrupt = "enabled ";
if (isr & BIT(j))
pending = "pending";
seq_printf(s, "%2u: %s %s IRQ %s %s\n", bit,
direction, level, interrupt, pending);
}
}
return;
unlock:
mutex_unlock(&adnp->i2c_lock);
}
static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios)
{
struct gpio_chip *chip = &adnp->gpio;
int err;
adnp->reg_shift = get_count_order(num_gpios) - 3;
chip->direction_input = adnp_gpio_direction_input;
chip->direction_output = adnp_gpio_direction_output;
chip->get = adnp_gpio_get;
chip->set = adnp_gpio_set;
chip->can_sleep = true;
if (IS_ENABLED(CONFIG_DEBUG_FS))
chip->dbg_show = adnp_gpio_dbg_show;
chip->base = -1;
chip->ngpio = num_gpios;
chip->label = adnp->client->name;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
chip->parent = &adnp->client->dev;
chip->of_node = chip->parent->of_node;
chip->owner = THIS_MODULE;
err = devm_gpiochip_add_data(&adnp->client->dev, chip, adnp);
if (err)
return err;
return 0;
}
static irqreturn_t adnp_irq(int irq, void *data)
{
struct adnp *adnp = data;
unsigned int num_regs, i;
num_regs = 1 << adnp->reg_shift;
for (i = 0; i < num_regs; i++) {
unsigned int base = i << adnp->reg_shift, bit;
u8 changed, level, isr, ier;
unsigned long pending;
int err;
mutex_lock(&adnp->i2c_lock);
err = adnp_read(adnp, GPIO_PLR(adnp) + i, &level);
if (err < 0) {
mutex_unlock(&adnp->i2c_lock);
continue;
}
err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
if (err < 0) {
mutex_unlock(&adnp->i2c_lock);
continue;
}
err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
if (err < 0) {
mutex_unlock(&adnp->i2c_lock);
continue;
}
mutex_unlock(&adnp->i2c_lock);
/* determine pins that changed levels */
changed = level ^ adnp->irq_level[i];
/* compute edge-triggered interrupts */
pending = changed & ((adnp->irq_fall[i] & ~level) |
(adnp->irq_rise[i] & level));
/* add in level-triggered interrupts */
pending |= (adnp->irq_high[i] & level) |
(adnp->irq_low[i] & ~level);
/* mask out non-pending and disabled interrupts */
pending &= isr & ier;
for_each_set_bit(bit, &pending, 8) {
unsigned int child_irq;
child_irq = irq_find_mapping(adnp->gpio.irq.domain,
base + bit);
handle_nested_irq(child_irq);
}
}
return IRQ_HANDLED;
}
static void adnp_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct adnp *adnp = gpiochip_get_data(gc);
unsigned int reg = d->hwirq >> adnp->reg_shift;
unsigned int pos = d->hwirq & 7;
adnp->irq_enable[reg] &= ~BIT(pos);
}
static void adnp_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct adnp *adnp = gpiochip_get_data(gc);
unsigned int reg = d->hwirq >> adnp->reg_shift;
unsigned int pos = d->hwirq & 7;
adnp->irq_enable[reg] |= BIT(pos);
}
static int adnp_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct adnp *adnp = gpiochip_get_data(gc);
unsigned int reg = d->hwirq >> adnp->reg_shift;
unsigned int pos = d->hwirq & 7;
if (type & IRQ_TYPE_EDGE_RISING)
adnp->irq_rise[reg] |= BIT(pos);
else
adnp->irq_rise[reg] &= ~BIT(pos);
if (type & IRQ_TYPE_EDGE_FALLING)
adnp->irq_fall[reg] |= BIT(pos);
else
adnp->irq_fall[reg] &= ~BIT(pos);
if (type & IRQ_TYPE_LEVEL_HIGH)
adnp->irq_high[reg] |= BIT(pos);
else
adnp->irq_high[reg] &= ~BIT(pos);
if (type & IRQ_TYPE_LEVEL_LOW)
adnp->irq_low[reg] |= BIT(pos);
else
adnp->irq_low[reg] &= ~BIT(pos);
return 0;
}
static void adnp_irq_bus_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct adnp *adnp = gpiochip_get_data(gc);
mutex_lock(&adnp->irq_lock);
}
static void adnp_irq_bus_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct adnp *adnp = gpiochip_get_data(gc);
unsigned int num_regs = 1 << adnp->reg_shift, i;
mutex_lock(&adnp->i2c_lock);
for (i = 0; i < num_regs; i++)
adnp_write(adnp, GPIO_IER(adnp) + i, adnp->irq_enable[i]);
mutex_unlock(&adnp->i2c_lock);
mutex_unlock(&adnp->irq_lock);
}
static struct irq_chip adnp_irq_chip = {
.name = "gpio-adnp",
.irq_mask = adnp_irq_mask,
.irq_unmask = adnp_irq_unmask,
.irq_set_type = adnp_irq_set_type,
.irq_bus_lock = adnp_irq_bus_lock,
.irq_bus_sync_unlock = adnp_irq_bus_unlock,
};
static int adnp_irq_setup(struct adnp *adnp)
{
unsigned int num_regs = 1 << adnp->reg_shift, i;
struct gpio_chip *chip = &adnp->gpio;
int err;
mutex_init(&adnp->irq_lock);
/*
* Allocate memory to keep track of the current level and trigger
* modes of the interrupts. To avoid multiple allocations, a single
* large buffer is allocated and pointers are setup to point at the
* corresponding offsets. For consistency, the layout of the buffer
* is chosen to match the register layout of the hardware in that
* each segment contains the corresponding bits for all interrupts.
*/
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
adnp->irq_enable = devm_kzalloc(chip->parent, num_regs * 6,
GFP_KERNEL);
if (!adnp->irq_enable)
return -ENOMEM;
adnp->irq_level = adnp->irq_enable + (num_regs * 1);
adnp->irq_rise = adnp->irq_enable + (num_regs * 2);
adnp->irq_fall = adnp->irq_enable + (num_regs * 3);
adnp->irq_high = adnp->irq_enable + (num_regs * 4);
adnp->irq_low = adnp->irq_enable + (num_regs * 5);
for (i = 0; i < num_regs; i++) {
/*
* Read the initial level of all pins to allow the emulation
* of edge triggered interrupts.
*/
err = adnp_read(adnp, GPIO_PLR(adnp) + i, &adnp->irq_level[i]);
if (err < 0)
return err;
/* disable all interrupts */
err = adnp_write(adnp, GPIO_IER(adnp) + i, 0);
if (err < 0)
return err;
adnp->irq_enable[i] = 0x00;
}
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
err = devm_request_threaded_irq(chip->parent, adnp->client->irq,
NULL, adnp_irq,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
dev_name(chip->parent), adnp);
if (err != 0) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
dev_err(chip->parent, "can't request IRQ#%d: %d\n",
adnp->client->irq, err);
return err;
}
gpio: simplify adding threaded interrupts This tries to simplify the use of CONFIG_GPIOLIB_IRQCHIP when using threaded interrupts: add a new call gpiochip_irqchip_add_nested() to indicate that we're dealing with a nested rather than a chained irqchip, then create a separate gpiochip_set_nested_irqchip() to mirror the gpiochip_set_chained_irqchip() call to connect the parent and child interrupts. In the nested case gpiochip_set_nested_irqchip() does nothing more than call irq_set_parent() on each valid child interrupt, which has little semantic effect in the kernel, but this is probably still formally correct. Update all drivers using nested interrupts to use gpiochip_irqchip_add_nested() so we can now see clearly which these users are. The DLN2 driver can drop its specific hack with .irq_not_threaded as we now recognize whether a chip is threaded or not from its use of gpiochip_irqchip_add_nested() signature rather than from inspecting .can_sleep. We rename the .irq_parent to .irq_chained_parent since this parent IRQ is only really kept around for the chained interrupt handlers. Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Cc: Semen Protsenko <semen.protsenko@globallogic.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24 17:57:25 +08:00
err = gpiochip_irqchip_add_nested(chip,
&adnp_irq_chip,
0,
handle_simple_irq,
IRQ_TYPE_NONE);
if (err) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
dev_err(chip->parent,
"could not connect irqchip to gpiochip\n");
return err;
}
gpiochip_set_nested_irqchip(chip, &adnp_irq_chip, adnp->client->irq);
return 0;
}
static int adnp_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
struct adnp *adnp;
u32 num_gpios;
int err;
err = of_property_read_u32(np, "nr-gpios", &num_gpios);
if (err < 0)
return err;
client->irq = irq_of_parse_and_map(np, 0);
if (!client->irq)
return -EPROBE_DEFER;
adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL);
if (!adnp)
return -ENOMEM;
mutex_init(&adnp->i2c_lock);
adnp->client = client;
err = adnp_gpio_setup(adnp, num_gpios);
if (err)
return err;
if (of_find_property(np, "interrupt-controller", NULL)) {
err = adnp_irq_setup(adnp);
if (err)
return err;
}
i2c_set_clientdata(client, adnp);
return 0;
}
static const struct i2c_device_id adnp_i2c_id[] = {
{ "gpio-adnp" },
{ },
};
MODULE_DEVICE_TABLE(i2c, adnp_i2c_id);
static const struct of_device_id adnp_of_match[] = {
{ .compatible = "ad,gpio-adnp", },
{ },
};
MODULE_DEVICE_TABLE(of, adnp_of_match);
static struct i2c_driver adnp_i2c_driver = {
.driver = {
.name = "gpio-adnp",
.of_match_table = adnp_of_match,
},
.probe = adnp_i2c_probe,
.id_table = adnp_i2c_id,
};
module_i2c_driver(adnp_i2c_driver);
MODULE_DESCRIPTION("Avionic Design N-bit GPIO expander");
MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
MODULE_LICENSE("GPL");