renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
Code
ebf6b78ebb
linux-next/drivers/media/platform/Makefile

53 lines
1.4 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Makefile for the video capture/playback device drivers.
#
V4L/DVB (9815): omap2: add OMAP2 camera driver. Add a driver for the OMAP2 camera block. OMAP2 is used in e.g. Nokia N800/N810 internet tablet. This driver uses the V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-02 02:40:09 +08:00
omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 14:38:15 +08:00
obj-$(CONFIG_VIDEO_VINO) += indycam.o
obj-$(CONFIG_VIDEO_VINO) += vino.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[media] move soc_camera to its own directory That helps to better organize the soc_camera items. While here, cleanup Makefiles, removing uneeded include dirs. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 20:49:34 +08:00
obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
[media] move soc_camera to its own directory That helps to better organize the soc_camera items. While here, cleanup Makefiles, removing uneeded include dirs. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 20:49:34 +08:00
obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
[media] marvell-cam: Move cafe-ccic into its own directory This driver will soon become a family of drivers, so let's give it its own place to live. This move requires putting ov7670.h into include/media, but there are no code changes. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-12 01:46:42 +08:00
obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
[media] marvell-cam: Basic working MMP camera driver Now we have a camera working over the marvell cam controller core. It works like the cafe driver and has all the same limitations, contiguous DMA only being one of them. But it's a start. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-12 01:46:49 +08:00
obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
V4L/DVB (5863): TCM825x: Add driver. Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used e.g. in Nokia N800 internet tablet. This driver uses the new V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-19 05:04:17 +08:00
[media] move soc_camera to its own directory That helps to better organize the soc_camera items. While here, cleanup Makefiles, removing uneeded include dirs. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 20:49:34 +08:00
obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o
[media] omap3isp: Kconfig and Makefile Add the OMAP3 ISP driver to the kernel build system. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-13 05:05:06 +08:00
obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/
V4L/DVB: v4l: Add MPC5121e VIU video capture driver Adds support for Video-In (VIU) unit of Freescale MPC5121e. The driver supports RGB888/RGB565 formats, capture and overlay on MPC5121e DIU frame buffer. Signed-off-by: Hongjun Chen <hong-jun.chen@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-02 21:10:09 +08:00
obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
V4L/DVB (3775): Add VIVI Kconfig stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-10 02:51:18 +08:00
obj-$(CONFIG_VIDEO_VIVI) += vivi.o
V4L/DVB: V4L: v4l2-subdev driver for AK8813 and AK8814 TV-encoders from AKM AK8814 only differs from AK8813 by included Macrovision Copy Protection function. This patch adds a driver for AK8813 and AK8814 I2C PAL/NTSC TV encoders. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-03-29 15:45:22 +08:00
[media] move soc_camera to its own directory That helps to better organize the soc_camera items. While here, cleanup Makefiles, removing uneeded include dirs. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 20:49:34 +08:00
obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
[media] v4l: Move s5p-fimc driver into Video capture devices s5p-fimc now also implements a camera capture video node so move it under the "Video capture devices" Kconfig menu. Also update the entry to reflect the driver's coverage of EXYNOS4 SoCs and separate the Makefile entry from the soc-camera drivers set. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04 20:21:57 +08:00
[media] MEM2MEM: Add support for eMMa-PrP mem2mem operations i.MX2x SoCs have a PrP which is capable of resizing and format conversion of video frames. This driver provides support for resizing and format conversion from YUYV to YUV420. This operation is of the utmost importance since some of these SoCs like i.MX27 include an H.264 video codec which only accepts YUV420 as input. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-13 17:31:02 +08:00
obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
[media] move soc_camera to its own directory That helps to better organize the soc_camera items. While here, cleanup Makefiles, removing uneeded include dirs. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 20:49:34 +08:00
obj-$(CONFIG_VIDEO_CODA) += coda.o
[media] MEM2MEM: Add support for eMMa-PrP mem2mem operations i.MX2x SoCs have a PrP which is capable of resizing and format conversion of video frames. This driver provides support for resizing and format conversion from YUYV to YUV420. This operation is of the utmost importance since some of these SoCs like i.MX27 include an H.264 video codec which only accepts YUV420 as input. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-13 17:31:02 +08:00
[media] media: Add mem2mem deinterlacing driver Some video decoders such as tvp5150 provide separate video fields (V4L2_FIELD_SEQ_TB/BT). This driver uses dmaengine to convert this format to V4L2_FIELD_INTERLACED_TB/BT (weaving) or V4L2_FIELD_NONE (line doubling) so that the image can be displayed or processed. Of course there will be combing effect in the image but this can be accepted for some low quality applications. Currently only YUV420 and YUYV formats are supported but it can be extended later. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-26 16:55:18 +08:00
obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o
V4L/DVB: v4l: Add driver for Samsung S5P SoC video postprocessor This driver exports a video device node per each camera interface/ video postprocessor (FIMC) device contained in Samsung S5P SoC series. The driver is based on v4l2-mem2mem framework. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-03 20:50:29 +08:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/
[media] Exynos4 JPEG codec v4l2 driver Add driver for the JPEG codec IP block available in Samsung Exynos SoC series. The driver is implemented as a V4L2 mem-to-mem device. It exposes two video nodes to user space, one for the encoding part, and one for the decoding part. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-24 22:15:23 +08:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/
[media] MFC: Add MFC 5.1 V4L2 driver Multi Format Codec 5.1 is a hardware video coding acceleration module found in the S5PV210 and Exynos4 Samsung SoCs. It is capable of handling a range of video codecs and this driver provides a V4L2 interface for video decoding and encoding. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Jeongtae Park <jtp.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-21 21:51:26 +08:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/
[media] v4l: s5p-tv: add drivers for HDMI on Samsung S5P platform Add drivers for HDMI outputs on Samsung platforms from S5P family. Drivers are using: - v4l2 framework - runtime PM Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-03 00:16:37 +08:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/
V4L/DVB (7170): soc_camera V4L2 driver for directly-connected SoC-based cameras This driver provides an interface between platform-specific camera busses and camera devices. It should be used if the camera is connected not over a "proper" bus like PCI or USB, but over a special bus, like, for example, the Quick Capture interface on PXA270 SoCs. Later it should also be used for i.MX31 SoCs from Freescale. It can handle multiple cameras and / or multiple busses, which can be used, e.g., in stereo-vision applications. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:42:03 +08:00
[media] v4l: add G2D driver for s5p device family G2D is a 2D graphics accelerator engine present in the s5p family of Samsung SoCs. It is capable of bitblt and raster operations on images having dimensions of up to 8000x8000. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-06 22:32:12 +08:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/
[media] gscaler: mark it as BROKEN -EMISSINGMAKEFILE Without a Makefile, the driver will not compile, causing breakages for arm exynos5 sub-architecture. Cc: Shaik Ameer Basha <shaik.ameer@samsung.com> Cc: Sungchun Kang <sungchun.kang@samsung.com> Cc: "Seung-Woo Kim/Mobile S/W Platform Lab(DMC)/E4" <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-15 23:35:08 +08:00
# FIXME!!! This driver is broken, as there's no makefile there!
#obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/
[media] v4l: add G2D driver for s5p device family G2D is a 2D graphics accelerator engine present in the s5p family of Samsung SoCs. It is capable of bitblt and raster operations on images having dimensions of up to 8000x8000. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-06 22:32:12 +08:00
[media] add blackfin capture bridge driver This is a v4l2 bridge driver for Blackfin video capture device, support ppi and eppi interface. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-09 04:44:17 +08:00
obj-$(CONFIG_BLACKFIN) += blackfin/
V4L/DVB: V4L: SuperH Video Output Unit (VOU) driver A number of SuperH Mobile SoCs, including sh7724, include a Video Output Unit. This patch adds a video (V4L2) output driver for it. The driver uses v4l2-subdev and mediabus APIs to interface to TV encoders. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-03-17 22:21:13 +08:00
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
Makefile: Add missing soc_camera/ directory drivers/built-in.o: In function `imx074_s_power': imx074.c:(.text+0x1de93d0): undefined reference to `soc_camera_power_on' imx074.c:(.text+0x1de93f3): undefined reference to `soc_camera_power_off' drivers/built-in.o: In function `mt9m001_s_mbus_config': Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-22 06:46:46 +08:00
obj-$(CONFIG_SOC_CAMERA) += soc_camera/
V4L/DVB: vpfe_capture: Create separate Kconfig file for davinci devices Currently VPFE Capture driver and DM6446 CCDC driver is being reused for AM3517. So this patch is preparing the Kconfig/makefile for re-use of such IP's. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-12 20:09:56 +08:00
obj-y += davinci/
V4L/DVB (12177): dm646x: Add an entry for dm646x EVM card at building system Makefile and Kconfig changes for DM646x Video Display device, using davinci/vpif, adv7343 and ths7303 drivers. Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-09 17:38:58 +08:00
V4L/DVB: V4L2: Add support for OMAP2/3 V4L2 display driver on top of DSS2 Features Supported - 1. Provides V4L2 user interface for the video pipelines of DSS 2. Basic streaming working on LCD, DVI and TV. 3. Works on latest DSS2 library from Tomi 4. Support for various pixel formats like YUV, UYVY, RGB32, RGB24, RGB565 5. Supports Alpha blending. 6. Supports Color keying both source and destination. 7. Supports rotation. 8. Supports cropping. 9. Supports Background color setting. 10. Allocated buffers to only needed size Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Murailidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-11 21:41:49 +08:00
obj-$(CONFIG_ARCH_OMAP) += omap/
[media] Fix vino compilation A trivial fix so that vino can find the saa7191.h header. [mchehab@redhat.com: Fix merge conflict] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 15:00:14 +08:00
ccflags-y += -I$(srctree)/drivers/media/i2c
Copy Permalink