renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 17:23:55 +08:00
Code
eb6211d360
linux-next/arch/powerpc/sysdev/fsl_msi.h

55 lines
1.5 KiB
C
Raw Normal View History

[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
/*
* Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Tony Li <tony.li@freescale.com>
* Jason Jin <Jason.jin@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2 of the
* License.
*
*/
#ifndef _POWERPC_SYSDEV_FSL_MSI_H
#define _POWERPC_SYSDEV_FSL_MSI_H
powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes On Freescale parts with multiple MSI controllers, the controllers are combined into one "pool" of interrupts. Whenever a device requests an MSI interrupt, the next available interrupt from the pool is selected, regardless of which MSI controller the interrupt is from. This works because each PCI bus has an ATMU to all of CCSR, so any PCI device can access any MSI interrupt register. The fsl,msi property is used to specify that a given PCI bus should only use a specific MSI device. This is necessary, for example, with the Freescale hypervisor, because the MSI devices are assigned to specific partitions. Ideally, we'd like to be able to assign MSI devices to PCI busses within the MSI or PCI layers. However, there does not appear to be a mechanism to do that. Whenever the MSI layer wants to allocate an MSI interrupt to a PCI device, it just calls arch_setup_msi_irqs(). It would be nice if we could register an MSI device with a specific PCI bus. So instead we remember the phandles of each MSI device, and we use that to limit our search for an available interrupt. Whenever we are asked to allocate a new interrupt for a PCI device, we check the fsl,msi property of the PCI bus for that device. If it exists, then as we are looping over all MSI devices, we skip the ones that don't have a matching phandle. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-01 06:06:35 +08:00
#include <linux/of.h>
powerpc: Convert the FSL MSI code to use msi_bitmap This is 90% straight forward, although we have to change a few printk format strings as well because of the change in type of hwirq. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-06 07:10:02 +08:00
#include <asm/msi_bitmap.h>
powerpc/fsl_msi: add MSIIR1 support for MPIC v4.3 The original MPIC MSI bank contains 8 registers, MPIC v4.3 MSI bank contains 16 registers, and this patch adds NR_MSI_REG_MAX and NR_MSI_IRQS_MAX to describe the maximum capability of MSI bank. MPIC v4.3 provides MSIIR1 to index these 16 MSI registers. MSIIR1 uses different bits definition than MSIIR. This patch adds ibs_shift and srs_shift to indicate the bits definition of the MSIIR and MSIIR1, so the same code can handle the MSIIR and MSIIR1 simultaneously. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> [scottwood@freescale.com: reinstated static on all_avail] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-21 18:59:14 +08:00
#define NR_MSI_REG_MSIIR 8 /* MSIIR can index 8 MSI registers */
#define NR_MSI_REG_MSIIR1 16 /* MSIIR1 can index 16 MSI registers */
#define NR_MSI_REG_MAX NR_MSI_REG_MSIIR1
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
#define IRQS_PER_MSI_REG 32
powerpc/fsl_msi: add MSIIR1 support for MPIC v4.3 The original MPIC MSI bank contains 8 registers, MPIC v4.3 MSI bank contains 16 registers, and this patch adds NR_MSI_REG_MAX and NR_MSI_IRQS_MAX to describe the maximum capability of MSI bank. MPIC v4.3 provides MSIIR1 to index these 16 MSI registers. MSIIR1 uses different bits definition than MSIIR. This patch adds ibs_shift and srs_shift to indicate the bits definition of the MSIIR and MSIIR1, so the same code can handle the MSIIR and MSIIR1 simultaneously. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> [scottwood@freescale.com: reinstated static on all_avail] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-21 18:59:14 +08:00
#define NR_MSI_IRQS_MAX (NR_MSI_REG_MAX * IRQS_PER_MSI_REG)
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
powerpc/fsl: add MSI support for the Freescale hypervisor Add support for vmpic-msi nodes to the fsl_msi driver. The MSI is virtualized by the hypervisor, so the vmpic-msi does not contain a 'reg' property. Instead, the driver uses hcalls. Add support for the "msi-address-64" property to the fsl_pci driver. The Freescale hypervisor typically puts the virtualized MSIIR register in the page after the end of DDR, so we extend the DDR ATMU to cover it. Any other location for MSIIR is not supported, for now. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-14 04:51:59 +08:00
#define FSL_PIC_IP_MASK 0x0000000F
#define FSL_PIC_IP_MPIC 0x00000001
#define FSL_PIC_IP_IPIC 0x00000002
#define FSL_PIC_IP_VMPIC 0x00000003
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
powerpc/85xx: workaround for chips with MSI hardware errata The MPIC version 2.0 has a MSI errata (errata PIC1 of mpc8544), It causes that neither MSI nor MSI-X can work fine. This is a workaround to allow MSI-X to function properly. Signed-off-by: Liu Shuo <soniccat.liu@gmail.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-02-26 15:23:08 +08:00
#define MSI_HW_ERRATA_ENDIAN 0x00000010
powerpc/fsl_msi: reorganize structs to improve clarity and flexibility Store cascade_data in an array inside the driver data for later use. Get rid of the msi_virq array since now we can encapsulate the virqs in the cascade_data directly and access them through the array mentioned earlier. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-08-19 19:25:01 +08:00
struct fsl_msi_cascade_data;
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
struct fsl_msi {
irq_domain/powerpc: Use common irq_domain structure instead of irq_host This patch drops the powerpc-specific irq_host structures and uses the common irq_domain strucutres defined in linux/irqdomain.h. It also fixes all the users to use the new structure names. Renaming irq_host to irq_domain has been discussed for a long time, and this patch is a step in the process of generalizing the powerpc virq code to be usable by all architecture. An astute reader will notice that this patch actually removes the irq_host structure instead of renaming it. This is because the irq_domain structure already exists in include/linux/irqdomain.h and has the needed data members. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:50 +08:00
struct irq_domain *irqhost;
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
unsigned long cascade_irq;
powerpc/fsl_msi: add support for "msi-address-64" property Add support for the msi-address-64 property of a PCI node. This property specifies the PCI address of MSIIR (message signaled interrupt index register). In commit 3da34aae ("powerpc/fsl: Support unique MSI addresses per PCIe Root Complex"), the msi_addr_hi/msi_addr_lo fields of struct fsl_msi were redefined from an actual address to just an offset, but the fields were not renamed accordingly. These fields are replace with a single field, msiir_offset, to reflect the new meaning. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-24 01:41:35 +08:00
u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
powerpc/fsl_msi: add MSIIR1 support for MPIC v4.3 The original MPIC MSI bank contains 8 registers, MPIC v4.3 MSI bank contains 16 registers, and this patch adds NR_MSI_REG_MAX and NR_MSI_IRQS_MAX to describe the maximum capability of MSI bank. MPIC v4.3 provides MSIIR1 to index these 16 MSI registers. MSIIR1 uses different bits definition than MSIIR. This patch adds ibs_shift and srs_shift to indicate the bits definition of the MSIIR and MSIIR1, so the same code can handle the MSIIR and MSIIR1 simultaneously. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> [scottwood@freescale.com: reinstated static on all_avail] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-21 18:59:14 +08:00
u32 ibs_shift; /* Shift of interrupt bit select */
u32 srs_shift; /* Shift of the shared interrupt register select */
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
void __iomem *msi_regs;
u32 feature;
powerpc/fsl_msi: reorganize structs to improve clarity and flexibility Store cascade_data in an array inside the driver data for later use. Get rid of the msi_virq array since now we can encapsulate the virqs in the cascade_data directly and access them through the array mentioned earlier. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-08-19 19:25:01 +08:00
struct fsl_msi_cascade_data *cascade_array[NR_MSI_REG_MAX];
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
powerpc: Convert the FSL MSI code to use msi_bitmap This is 90% straight forward, although we have to change a few printk format strings as well because of the change in type of hwirq. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-06 07:10:02 +08:00
struct msi_bitmap bitmap;
powerpc/fsl_msi: enable msi allocation in all banks Put all fsl_msi banks in a linked list. The list of banks then can be traversed when allocating new msi interrupts. Also fix failing path of fsl_setup_msi_irqs(). Signed-off-by: Zhao Chenhui <b26998@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-22 16:31:36 +08:00
struct list_head list; /* support multiple MSI banks */
powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes On Freescale parts with multiple MSI controllers, the controllers are combined into one "pool" of interrupts. Whenever a device requests an MSI interrupt, the next available interrupt from the pool is selected, regardless of which MSI controller the interrupt is from. This works because each PCI bus has an ATMU to all of CCSR, so any PCI device can access any MSI interrupt register. The fsl,msi property is used to specify that a given PCI bus should only use a specific MSI device. This is necessary, for example, with the Freescale hypervisor, because the MSI devices are assigned to specific partitions. Ideally, we'd like to be able to assign MSI devices to PCI busses within the MSI or PCI layers. However, there does not appear to be a mechanism to do that. Whenever the MSI layer wants to allocate an MSI interrupt to a PCI device, it just calls arch_setup_msi_irqs(). It would be nice if we could register an MSI device with a specific PCI bus. So instead we remember the phandles of each MSI device, and we use that to limit our search for an available interrupt. Whenever we are asked to allocate a new interrupt for a PCI device, we check the fsl,msi property of the PCI bus for that device. If it exists, then as we are looping over all MSI devices, we skip the ones that don't have a matching phandle. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-01 06:06:35 +08:00
phandle phandle;
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 16:32:46 +08:00
};
#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
Copy Permalink