2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
linux-next/kernel/ptrace.c

1315 lines
33 KiB
C
Raw Normal View History

/*
* linux/kernel/ptrace.c
*
* (C) Copyright 1999 Linus Torvalds
*
* Common interfaces for "ptrace()" which we do not want
* to continually duplicate across every architecture.
*/
#include <linux/capability.h>
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/sched/mm.h>
#include <linux/sched/coredump.h>
#include <linux/sched/task.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/ptrace.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/uio.h>
#include <linux/audit.h>
#include <linux/pid_namespace.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/regset.h>
#include <linux/hw_breakpoint.h>
#include <linux/cn_proc.h>
ptrace: add ability to retrieve signals without removing from a queue (v4) This patch adds a new ptrace request PTRACE_PEEKSIGINFO. This request is used to retrieve information about pending signals starting with the specified sequence number. Siginfo_t structures are copied from the child into the buffer starting at "data". The argument "addr" is a pointer to struct ptrace_peeksiginfo_args. struct ptrace_peeksiginfo_args { u64 off; /* from which siginfo to start */ u32 flags; s32 nr; /* how may siginfos to take */ }; "nr" has type "s32", because ptrace() returns "long", which has 32 bits on i386 and a negative values is used for errors. Currently here is only one flag PTRACE_PEEKSIGINFO_SHARED for dumping signals from process-wide queue. If this flag is not set, signals are read from a per-thread queue. The request PTRACE_PEEKSIGINFO returns a number of dumped signals. If a signal with the specified sequence number doesn't exist, ptrace returns zero. The request returns an error, if no signal has been dumped. Errors: EINVAL - one or more specified flags are not supported or nr is negative EFAULT - buf or addr is outside your accessible address space. A result siginfo contains a kernel part of si_code which usually striped, but it's required for queuing the same siginfo back during restore of pending signals. This functionality is required for checkpointing pending signals. Pedro Alves suggested using it in "gdb" to peek at pending signals. gdb already uses PTRACE_GETSIGINFO to get the siginfo for the signal which was already dequeued. This functionality allows gdb to look at the pending signals which were not reported yet. The prototype of this code was developed by Oleg Nesterov. Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:59 +08:00
#include <linux/compat.h>
/*
* Access another process' address space via ptrace.
* Source/target buffer must be kernel space,
* Do not walk the page table directly, use get_user_pages
*/
int ptrace_access_vm(struct task_struct *tsk, unsigned long addr,
void *buf, int len, unsigned int gup_flags)
{
struct mm_struct *mm;
int ret;
mm = get_task_mm(tsk);
if (!mm)
return 0;
if (!tsk->ptrace ||
(current != tsk->parent) ||
((get_dumpable(mm) != SUID_DUMP_USER) &&
!ptracer_capable(tsk, mm->user_ns))) {
mmput(mm);
return 0;
}
ret = __access_remote_vm(tsk, mm, addr, buf, len, gup_flags);
mmput(mm);
return ret;
}
void __ptrace_link(struct task_struct *child, struct task_struct *new_parent,
const struct cred *ptracer_cred)
{
BUG_ON(!list_empty(&child->ptrace_entry));
list_add(&child->ptrace_entry, &new_parent->ptraced);
child->parent = new_parent;
child->ptracer_cred = get_cred(ptracer_cred);
}
/*
* ptrace a task: make the debugger its new parent and
* move it to the ptrace list.
*
* Must be called with the tasklist lock write-held.
*/
static void ptrace_link(struct task_struct *child, struct task_struct *new_parent)
{
rcu_read_lock();
__ptrace_link(child, new_parent, __task_cred(new_parent));
rcu_read_unlock();
}
/**
* __ptrace_unlink - unlink ptracee and restore its execution state
* @child: ptracee to be unlinked
*
ptrace: Always put ptracee into appropriate execution state Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 17:37:01 +08:00
* Remove @child from the ptrace list, move it back to the original parent,
* and restore the execution state so that it conforms to the group stop
* state.
*
* Unlinking can happen via two paths - explicit PTRACE_DETACH or ptracer
* exiting. For PTRACE_DETACH, unless the ptracee has been killed between
* ptrace_check_attach() and here, it's guaranteed to be in TASK_TRACED.
* If the ptracer is exiting, the ptracee can be in any state.
*
* After detach, the ptracee should be in a state which conforms to the
* group stop. If the group is stopped or in the process of stopping, the
* ptracee should be put into TASK_STOPPED; otherwise, it should be woken
* up from TASK_TRACED.
*
* If the ptracee is in TASK_TRACED and needs to be moved to TASK_STOPPED,
* it goes through TRACED -> RUNNING -> STOPPED transition which is similar
* to but in the opposite direction of what happens while attaching to a
* stopped task. However, in this direction, the intermediate RUNNING
* state is not hidden even from the current ptracer and if it immediately
* re-attaches and performs a WNOHANG wait(2), it may fail.
*
* CONTEXT:
* write_lock_irq(tasklist_lock)
*/
void __ptrace_unlink(struct task_struct *child)
{
const struct cred *old_cred;
BUG_ON(!child->ptrace);
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
child->parent = child->real_parent;
list_del_init(&child->ptrace_entry);
old_cred = child->ptracer_cred;
child->ptracer_cred = NULL;
put_cred(old_cred);
spin_lock(&child->sighand->siglock);
child->ptrace = 0;
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:14 +08:00
/*
* Clear all pending traps and TRAPPING. TRAPPING should be
* cleared regardless of JOBCTL_STOP_PENDING. Do it explicitly.
*/
task_clear_jobctl_pending(child, JOBCTL_TRAP_MASK);
task_clear_jobctl_trapping(child);
ptrace: Always put ptracee into appropriate execution state Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 17:37:01 +08:00
/*
* Reinstate JOBCTL_STOP_PENDING if group stop is in effect and
ptrace: Always put ptracee into appropriate execution state Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 17:37:01 +08:00
* @child isn't dead.
*/
if (!(child->flags & PF_EXITING) &&
(child->signal->flags & SIGNAL_STOP_STOPPED ||
child->signal->group_stop_count)) {
child->jobctl |= JOBCTL_STOP_PENDING;
ptrace: Always put ptracee into appropriate execution state Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 17:37:01 +08:00
/*
* This is only possible if this thread was cloned by the
* traced task running in the stopped group, set the signal
* for the future reports.
* FIXME: we should change ptrace_init_task() to handle this
* case.
*/
if (!(child->jobctl & JOBCTL_STOP_SIGMASK))
child->jobctl |= SIGSTOP;
}
ptrace: Always put ptracee into appropriate execution state Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 17:37:01 +08:00
/*
* If transition to TASK_STOPPED is pending or in TASK_TRACED, kick
* @child in the butt. Note that @resume should be used iff @child
* is in TASK_TRACED; otherwise, we might unduly disrupt
* TASK_KILLABLE sleeps.
*/
if (child->jobctl & JOBCTL_STOP_PENDING || task_is_traced(child))
ptrace_signal_wake_up(child, true);
ptrace: Always put ptracee into appropriate execution state Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 17:37:01 +08:00
spin_unlock(&child->sighand->siglock);
}
/* Ensure that nothing can wake it up, even SIGKILL */
static bool ptrace_freeze_traced(struct task_struct *task)
{
bool ret = false;
/* Lockless, nobody but us can set this flag */
if (task->jobctl & JOBCTL_LISTENING)
return ret;
spin_lock_irq(&task->sighand->siglock);
if (task_is_traced(task) && !__fatal_signal_pending(task)) {
task->state = __TASK_TRACED;
ret = true;
}
spin_unlock_irq(&task->sighand->siglock);
return ret;
}
static void ptrace_unfreeze_traced(struct task_struct *task)
{
if (task->state != __TASK_TRACED)
return;
WARN_ON(!task->ptrace || task->parent != current);
/*
* PTRACE_LISTEN can allow ptrace_trap_notify to wake us up remotely.
* Recheck state under the lock to close this race.
*/
spin_lock_irq(&task->sighand->siglock);
if (task->state == __TASK_TRACED) {
if (__fatal_signal_pending(task))
wake_up_state(task, __TASK_TRACED);
else
task->state = TASK_TRACED;
}
spin_unlock_irq(&task->sighand->siglock);
}
/**
* ptrace_check_attach - check whether ptracee is ready for ptrace operation
* @child: ptracee to check for
* @ignore_state: don't check whether @child is currently %TASK_TRACED
*
* Check whether @child is being ptraced by %current and ready for further
* ptrace operations. If @ignore_state is %false, @child also should be in
* %TASK_TRACED state and on return the child is guaranteed to be traced
* and not executing. If @ignore_state is %true, @child can be in any
* state.
*
* CONTEXT:
* Grabs and releases tasklist_lock and @child->sighand->siglock.
*
* RETURNS:
* 0 on success, -ESRCH if %child is not ready.
*/
static int ptrace_check_attach(struct task_struct *child, bool ignore_state)
{
int ret = -ESRCH;
/*
* We take the read lock around doing both checks to close a
* possible race where someone else was tracing our child and
* detached between these two checks. After this locked check,
* we are sure that this is our traced child and that can only
* be changed by us so it's not changing right after this.
*/
read_lock(&tasklist_lock);
if (child->ptrace && child->parent == current) {
WARN_ON(child->state == __TASK_TRACED);
/*
* child->sighand can't be NULL, release_task()
* does ptrace_unlink() before __exit_signal().
*/
if (ignore_state || ptrace_freeze_traced(child))
ret = 0;
}
read_unlock(&tasklist_lock);
if (!ret && !ignore_state) {
if (!wait_task_inactive(child, __TASK_TRACED)) {
/*
* This can only happen if may_ptrace_stop() fails and
* ptrace_stop() changes ->state back to TASK_RUNNING,
* so we should not worry about leaking __TASK_TRACED.
*/
WARN_ON(child->state == __TASK_TRACED);
ret = -ESRCH;
}
}
return ret;
}
static int ptrace_has_cap(struct user_namespace *ns, unsigned int mode)
{
if (mode & PTRACE_MODE_NOAUDIT)
return has_ns_capability_noaudit(current, ns, CAP_SYS_PTRACE);
else
return has_ns_capability(current, ns, CAP_SYS_PTRACE);
}
/* Returns 0 on success, -errno on denial. */
static int __ptrace_may_access(struct task_struct *task, unsigned int mode)
{
const struct cred *cred = current_cred(), *tcred;
mm: Add a user_ns owner to mm_struct and fix ptrace permission checks During exec dumpable is cleared if the file that is being executed is not readable by the user executing the file. A bug in ptrace_may_access allows reading the file if the executable happens to enter into a subordinate user namespace (aka clone(CLONE_NEWUSER), unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER). This problem is fixed with only necessary userspace breakage by adding a user namespace owner to mm_struct, captured at the time of exec, so it is clear in which user namespace CAP_SYS_PTRACE must be present in to be able to safely give read permission to the executable. The function ptrace_may_access is modified to verify that the ptracer has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns. This ensures that if the task changes it's cred into a subordinate user namespace it does not become ptraceable. The function ptrace_attach is modified to only set PT_PTRACE_CAP when CAP_SYS_PTRACE is held over task->mm->user_ns. The intent of PT_PTRACE_CAP is to be a flag to note that whatever permission changes the task might go through the tracer has sufficient permissions for it not to be an issue. task->cred->user_ns is always the same as or descendent of mm->user_ns. Which guarantees that having CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks credentials. To prevent regressions mm->dumpable and mm->user_ns are not considered when a task has no mm. As simply failing ptrace_may_attach causes regressions in privileged applications attempting to read things such as /proc/<pid>/stat Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Fixes: 8409cca70561 ("userns: allow ptrace from non-init user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-10-14 10:23:16 +08:00
struct mm_struct *mm;
ptrace: use fsuid, fsgid, effective creds for fs access checks By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:00:04 +08:00
kuid_t caller_uid;
kgid_t caller_gid;
if (!(mode & PTRACE_MODE_FSCREDS) == !(mode & PTRACE_MODE_REALCREDS)) {
WARN(1, "denying ptrace access check without PTRACE_MODE_*CREDS\n");
return -EPERM;
}
/* May we inspect the given task?
* This check is used both for attaching with ptrace
* and for allowing access to sensitive information in /proc.
*
* ptrace_attach denies several cases that /proc allows
* because setting up the necessary parent/child relationship
* or halting the specified task is impossible.
*/
ptrace: use fsuid, fsgid, effective creds for fs access checks By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:00:04 +08:00
/* Don't let security modules deny introspection */
if (same_thread_group(task, current))
return 0;
rcu_read_lock();
ptrace: use fsuid, fsgid, effective creds for fs access checks By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:00:04 +08:00
if (mode & PTRACE_MODE_FSCREDS) {
caller_uid = cred->fsuid;
caller_gid = cred->fsgid;
} else {
/*
* Using the euid would make more sense here, but something
* in userland might rely on the old behavior, and this
* shouldn't be a security problem since
* PTRACE_MODE_REALCREDS implies that the caller explicitly
* used a syscall that requests access to another process
* (and not a filesystem syscall to procfs).
*/
caller_uid = cred->uid;
caller_gid = cred->gid;
}
tcred = __task_cred(task);
ptrace: use fsuid, fsgid, effective creds for fs access checks By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:00:04 +08:00
if (uid_eq(caller_uid, tcred->euid) &&
uid_eq(caller_uid, tcred->suid) &&
uid_eq(caller_uid, tcred->uid) &&
gid_eq(caller_gid, tcred->egid) &&
gid_eq(caller_gid, tcred->sgid) &&
gid_eq(caller_gid, tcred->gid))
goto ok;
if (ptrace_has_cap(tcred->user_ns, mode))
goto ok;
rcu_read_unlock();
return -EPERM;
ok:
rcu_read_unlock();
mm: Add a user_ns owner to mm_struct and fix ptrace permission checks During exec dumpable is cleared if the file that is being executed is not readable by the user executing the file. A bug in ptrace_may_access allows reading the file if the executable happens to enter into a subordinate user namespace (aka clone(CLONE_NEWUSER), unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER). This problem is fixed with only necessary userspace breakage by adding a user namespace owner to mm_struct, captured at the time of exec, so it is clear in which user namespace CAP_SYS_PTRACE must be present in to be able to safely give read permission to the executable. The function ptrace_may_access is modified to verify that the ptracer has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns. This ensures that if the task changes it's cred into a subordinate user namespace it does not become ptraceable. The function ptrace_attach is modified to only set PT_PTRACE_CAP when CAP_SYS_PTRACE is held over task->mm->user_ns. The intent of PT_PTRACE_CAP is to be a flag to note that whatever permission changes the task might go through the tracer has sufficient permissions for it not to be an issue. task->cred->user_ns is always the same as or descendent of mm->user_ns. Which guarantees that having CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks credentials. To prevent regressions mm->dumpable and mm->user_ns are not considered when a task has no mm. As simply failing ptrace_may_attach causes regressions in privileged applications attempting to read things such as /proc/<pid>/stat Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Fixes: 8409cca70561 ("userns: allow ptrace from non-init user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-10-14 10:23:16 +08:00
mm = task->mm;
if (mm &&
((get_dumpable(mm) != SUID_DUMP_USER) &&
!ptrace_has_cap(mm->user_ns, mode)))
return -EPERM;
return security_ptrace_access_check(task, mode);
}
Security: split proc ptrace checking into read vs. attach Enable security modules to distinguish reading of process state via proc from full ptrace access by renaming ptrace_may_attach to ptrace_may_access and adding a mode argument indicating whether only read access or full attach access is requested. This allows security modules to permit access to reading process state without granting full ptrace access. The base DAC/capability checking remains unchanged. Read access to /proc/pid/mem continues to apply a full ptrace attach check since check_mem_permission() already requires the current task to already be ptracing the target. The other ptrace checks within proc for elements like environ, maps, and fds are changed to pass the read mode instead of attach. In the SELinux case, we model such reading of process state as a reading of a proc file labeled with the target process' label. This enables SELinux policy to permit such reading of process state without permitting control or manipulation of the target process, as there are a number of cases where programs probe for such information via proc but do not need to be able to control the target (e.g. procps, lsof, PolicyKit, ConsoleKit). At present we have to choose between allowing full ptrace in policy (more permissive than required/desired) or breaking functionality (or in some cases just silencing the denials via dontaudit rules but this can hide genuine attacks). This version of the patch incorporates comments from Casey Schaufler (change/replace existing ptrace_may_attach interface, pass access mode), and Chris Wright (provide greater consistency in the checking). Note that like their predecessors __ptrace_may_attach and ptrace_may_attach, the __ptrace_may_access and ptrace_may_access interfaces use different return value conventions from each other (0 or -errno vs. 1 or 0). I retained this difference to avoid any changes to the caller logic but made the difference clearer by changing the latter interface to return a bool rather than an int and by adding a comment about it to ptrace.h for any future callers. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-05-19 20:32:49 +08:00
bool ptrace_may_access(struct task_struct *task, unsigned int mode)
{
int err;
task_lock(task);
Security: split proc ptrace checking into read vs. attach Enable security modules to distinguish reading of process state via proc from full ptrace access by renaming ptrace_may_attach to ptrace_may_access and adding a mode argument indicating whether only read access or full attach access is requested. This allows security modules to permit access to reading process state without granting full ptrace access. The base DAC/capability checking remains unchanged. Read access to /proc/pid/mem continues to apply a full ptrace attach check since check_mem_permission() already requires the current task to already be ptracing the target. The other ptrace checks within proc for elements like environ, maps, and fds are changed to pass the read mode instead of attach. In the SELinux case, we model such reading of process state as a reading of a proc file labeled with the target process' label. This enables SELinux policy to permit such reading of process state without permitting control or manipulation of the target process, as there are a number of cases where programs probe for such information via proc but do not need to be able to control the target (e.g. procps, lsof, PolicyKit, ConsoleKit). At present we have to choose between allowing full ptrace in policy (more permissive than required/desired) or breaking functionality (or in some cases just silencing the denials via dontaudit rules but this can hide genuine attacks). This version of the patch incorporates comments from Casey Schaufler (change/replace existing ptrace_may_attach interface, pass access mode), and Chris Wright (provide greater consistency in the checking). Note that like their predecessors __ptrace_may_attach and ptrace_may_attach, the __ptrace_may_access and ptrace_may_access interfaces use different return value conventions from each other (0 or -errno vs. 1 or 0). I retained this difference to avoid any changes to the caller logic but made the difference clearer by changing the latter interface to return a bool rather than an int and by adding a comment about it to ptrace.h for any future callers. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-05-19 20:32:49 +08:00
err = __ptrace_may_access(task, mode);
task_unlock(task);
return !err;
}
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
static int ptrace_attach(struct task_struct *task, long request,
unsigned long addr,
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
unsigned long flags)
{
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
bool seize = (request == PTRACE_SEIZE);
int retval;
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
retval = -EIO;
if (seize) {
if (addr != 0)
goto out;
if (flags & ~(unsigned long)PTRACE_O_MASK)
goto out;
flags = PT_PTRACED | PT_SEIZED | (flags << PT_OPT_FLAG_SHIFT);
} else {
flags = PT_PTRACED;
}
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
audit_ptrace(task);
retval = -EPERM;
if (unlikely(task->flags & PF_KTHREAD))
goto out;
if (same_thread_group(task, current))
goto out;
/*
* Protect exec's credential calculations against our interference;
* SUID, SGID and LSM creds get determined differently
* under ptrace.
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 07:39:23 +08:00
*/
retval = -ERESTARTNOINTR;
if (mutex_lock_interruptible(&task->signal->cred_guard_mutex))
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 07:39:23 +08:00
goto out;
task_lock(task);
ptrace: use fsuid, fsgid, effective creds for fs access checks By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:00:04 +08:00
retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS);
task_unlock(task);
if (retval)
goto unlock_creds;
write_lock_irq(&tasklist_lock);
retval = -EPERM;
if (unlikely(task->exit_state))
goto unlock_tasklist;
if (task->ptrace)
goto unlock_tasklist;
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
if (seize)
flags |= PT_SEIZED;
task->ptrace = flags;
ptrace_link(task, current);
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
/* SEIZE doesn't trap tracee on attach */
if (!seize)
send_sig_info(SIGSTOP, SEND_SIG_FORCED, task);
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 17:37:00 +08:00
spin_lock(&task->sighand->siglock);
/*
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:14 +08:00
* If the task is already STOPPED, set JOBCTL_TRAP_STOP and
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 17:37:00 +08:00
* TRAPPING, and kick it so that it transits to TRACED. TRAPPING
* will be cleared if the child completes the transition or any
* event which clears the group stop states happens. We'll wait
* for the transition to complete before returning from this
* function.
*
* This hides STOPPED -> RUNNING -> TRACED transition from the
* attaching thread but a different thread in the same group can
* still observe the transient RUNNING state. IOW, if another
* thread's WNOHANG wait(2) on the stopped tracee races against
* ATTACH, the wait(2) may fail due to the transient RUNNING.
*
* The following task_is_stopped() test is safe as both transitions
* in and out of STOPPED are protected by siglock.
*/
if (task_is_stopped(task) &&
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:14 +08:00
task_set_jobctl_pending(task, JOBCTL_TRAP_STOP | JOBCTL_TRAPPING))
signal_wake_up_state(task, __TASK_STOPPED);
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 17:37:00 +08:00
spin_unlock(&task->sighand->siglock);
retval = 0;
unlock_tasklist:
write_unlock_irq(&tasklist_lock);
unlock_creds:
mutex_unlock(&task->signal->cred_guard_mutex);
out:
if (!retval) {
/*
* We do not bother to change retval or clear JOBCTL_TRAPPING
* if wait_on_bit() was interrupted by SIGKILL. The tracer will
* not return to user-mode, it will exit and clear this bit in
* __ptrace_unlink() if it wasn't already cleared by the tracee;
* and until then nobody can ptrace this task.
*/
wait_on_bit(&task->jobctl, JOBCTL_TRAPPING_BIT, TASK_KILLABLE);
proc_ptrace_connector(task, PTRACE_ATTACH);
}
return retval;
}
/**
* ptrace_traceme -- helper for PTRACE_TRACEME
*
* Performs checks and sets PT_PTRACED.
* Should be used by all ptrace implementations for PTRACE_TRACEME.
*/
static int ptrace_traceme(void)
{
int ret = -EPERM;
write_lock_irq(&tasklist_lock);
/* Are we already being traced? */
if (!current->ptrace) {
ret = security_ptrace_traceme(current->parent);
/*
* Check PF_EXITING to ensure ->real_parent has not passed
* exit_ptrace(). Otherwise we don't report the error but
* pretend ->real_parent untraces us right after return.
*/
if (!ret && !(current->real_parent->flags & PF_EXITING)) {
current->ptrace = PT_PTRACED;
ptrace_link(current, current->real_parent);
}
}
write_unlock_irq(&tasklist_lock);
return ret;
}
/*
* Called with irqs disabled, returns true if childs should reap themselves.
*/
static int ignoring_children(struct sighand_struct *sigh)
{
int ret;
spin_lock(&sigh->siglock);
ret = (sigh->action[SIGCHLD-1].sa.sa_handler == SIG_IGN) ||
(sigh->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDWAIT);
spin_unlock(&sigh->siglock);
return ret;
}
/*
* Called with tasklist_lock held for writing.
* Unlink a traced task, and clean it up if it was a traced zombie.
* Return true if it needs to be reaped with release_task().
* (We can't call release_task() here because we already hold tasklist_lock.)
*
* If it's a zombie, our attachedness prevented normal parent notification
* or self-reaping. Do notification now if it would have happened earlier.
* If it should reap itself, return true.
*
* If it's our own child, there is no notification to do. But if our normal
* children self-reap, then this child was prevented by ptrace and we must
* reap it now, in that case we must also wake up sub-threads sleeping in
* do_wait().
*/
static bool __ptrace_detach(struct task_struct *tracer, struct task_struct *p)
{
bool dead;
__ptrace_unlink(p);
if (p->exit_state != EXIT_ZOMBIE)
return false;
dead = !thread_group_leader(p);
if (!dead && thread_group_empty(p)) {
if (!same_thread_group(p->real_parent, tracer))
dead = do_notify_parent(p, p->exit_signal);
else if (ignoring_children(tracer->sighand)) {
__wake_up_parent(p, tracer);
dead = true;
}
}
/* Mark it as in the process of being reaped. */
if (dead)
p->exit_state = EXIT_DEAD;
return dead;
}
static int ptrace_detach(struct task_struct *child, unsigned int data)
{
if (!valid_signal(data))
return -EIO;
/* Architecture-specific hardware disable .. */
ptrace_disable(child);
write_lock_irq(&tasklist_lock);
/*
* We rely on ptrace_freeze_traced(). It can't be killed and
* untraced by another thread, it can't be a zombie.
*/
WARN_ON(!child->ptrace || child->exit_state);
/*
* tasklist_lock avoids the race with wait_task_stopped(), see
* the comment in ptrace_resume().
*/
child->exit_code = data;
__ptrace_detach(current, child);
write_unlock_irq(&tasklist_lock);
proc_ptrace_connector(child, PTRACE_DETACH);
return 0;
}
/*
* Detach all tasks we were using ptrace on. Called with tasklist held
* for writing.
*/
void exit_ptrace(struct task_struct *tracer, struct list_head *dead)
{
struct task_struct *p, *n;
list_for_each_entry_safe(p, n, &tracer->ptraced, ptrace_entry) {
if (unlikely(p->ptrace & PT_EXITKILL))
send_sig_info(SIGKILL, SEND_SIG_FORCED, p);
if (__ptrace_detach(tracer, p))
list_add(&p->ptrace_entry, dead);
}
}
int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len)
{
int copied = 0;
while (len > 0) {
char buf[128];
int this_len, retval;
this_len = (len > sizeof(buf)) ? sizeof(buf) : len;
retval = ptrace_access_vm(tsk, src, buf, this_len, FOLL_FORCE);
if (!retval) {
if (copied)
break;
return -EIO;
}
if (copy_to_user(dst, buf, retval))
return -EFAULT;
copied += retval;
src += retval;
dst += retval;
len -= retval;
}
return copied;
}
int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len)
{
int copied = 0;
while (len > 0) {
char buf[128];
int this_len, retval;
this_len = (len > sizeof(buf)) ? sizeof(buf) : len;
if (copy_from_user(buf, src, this_len))
return -EFAULT;
retval = ptrace_access_vm(tsk, dst, buf, this_len,
FOLL_FORCE | FOLL_WRITE);
if (!retval) {
if (copied)
break;
return -EIO;
}
copied += retval;
src += retval;
dst += retval;
len -= retval;
}
return copied;
}
static int ptrace_setoptions(struct task_struct *child, unsigned long data)
{
unsigned flags;
if (data & ~(unsigned long)PTRACE_O_MASK)
return -EINVAL;
seccomp: add ptrace options for suspend/resume This patch is the first step in enabling checkpoint/restore of processes with seccomp enabled. One of the things CRIU does while dumping tasks is inject code into them via ptrace to collect information that is only available to the process itself. However, if we are in a seccomp mode where these processes are prohibited from making these syscalls, then what CRIU does kills the task. This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp filters to disable (and re-enable) seccomp filters for another task so that they can be successfully dumped (and restored). We restrict the set of processes that can disable seccomp through ptrace because although today ptrace can be used to bypass seccomp, there is some discussion of closing this loophole in the future and we would like this patch to not depend on that behavior and be future proofed for when it is removed. Note that seccomp can be suspended before any filters are actually installed; this behavior is useful on criu restore, so that we can suspend seccomp, restore the filters, unmap our restore code from the restored process' address space, and then resume the task by detaching and have the filters resumed as well. v2 changes: * require that the tracer have no seccomp filters installed * drop TIF_NOTSC manipulation from the patch * change from ptrace command to a ptrace option and use this ptrace option as the flag to check. This means that as soon as the tracer detaches/dies, seccomp is re-enabled and as a corrollary that one can not disable seccomp across PTRACE_ATTACHs. v3 changes: * get rid of various #ifdefs everywhere * report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly used v4 changes: * get rid of may_suspend_seccomp() in favor of a capable() check in ptrace directly v5 changes: * check that seccomp is not enabled (or suspended) on the tracer Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Will Drewry <wad@chromium.org> CC: Roland McGrath <roland@hack.frob.com> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> [kees: access seccomp.mode through seccomp_mode() instead] Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 23:02:48 +08:00
if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:45:50 +08:00
if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
!IS_ENABLED(CONFIG_SECCOMP))
seccomp: add ptrace options for suspend/resume This patch is the first step in enabling checkpoint/restore of processes with seccomp enabled. One of the things CRIU does while dumping tasks is inject code into them via ptrace to collect information that is only available to the process itself. However, if we are in a seccomp mode where these processes are prohibited from making these syscalls, then what CRIU does kills the task. This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp filters to disable (and re-enable) seccomp filters for another task so that they can be successfully dumped (and restored). We restrict the set of processes that can disable seccomp through ptrace because although today ptrace can be used to bypass seccomp, there is some discussion of closing this loophole in the future and we would like this patch to not depend on that behavior and be future proofed for when it is removed. Note that seccomp can be suspended before any filters are actually installed; this behavior is useful on criu restore, so that we can suspend seccomp, restore the filters, unmap our restore code from the restored process' address space, and then resume the task by detaching and have the filters resumed as well. v2 changes: * require that the tracer have no seccomp filters installed * drop TIF_NOTSC manipulation from the patch * change from ptrace command to a ptrace option and use this ptrace option as the flag to check. This means that as soon as the tracer detaches/dies, seccomp is re-enabled and as a corrollary that one can not disable seccomp across PTRACE_ATTACHs. v3 changes: * get rid of various #ifdefs everywhere * report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly used v4 changes: * get rid of may_suspend_seccomp() in favor of a capable() check in ptrace directly v5 changes: * check that seccomp is not enabled (or suspended) on the tracer Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Will Drewry <wad@chromium.org> CC: Roland McGrath <roland@hack.frob.com> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> [kees: access seccomp.mode through seccomp_mode() instead] Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 23:02:48 +08:00
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (seccomp_mode(&current->seccomp) != SECCOMP_MODE_DISABLED ||
current->ptrace & PT_SUSPEND_SECCOMP)
return -EPERM;
}
/* Avoid intermediate state when all opts are cleared */
flags = child->ptrace;
flags &= ~(PTRACE_O_MASK << PT_OPT_FLAG_SHIFT);
flags |= (data << PT_OPT_FLAG_SHIFT);
child->ptrace = flags;
return 0;
}
static int ptrace_getsiginfo(struct task_struct *child, siginfo_t *info)
{
unsigned long flags;
int error = -ESRCH;
if (lock_task_sighand(child, &flags)) {
error = -EINVAL;
if (likely(child->last_siginfo != NULL)) {
copy_siginfo(info, child->last_siginfo);
error = 0;
}
unlock_task_sighand(child, &flags);
}
return error;
}
static int ptrace_setsiginfo(struct task_struct *child, const siginfo_t *info)
{
unsigned long flags;
int error = -ESRCH;
if (lock_task_sighand(child, &flags)) {
error = -EINVAL;
if (likely(child->last_siginfo != NULL)) {
copy_siginfo(child->last_siginfo, info);
error = 0;
}
unlock_task_sighand(child, &flags);
}
return error;
}
ptrace: add ability to retrieve signals without removing from a queue (v4) This patch adds a new ptrace request PTRACE_PEEKSIGINFO. This request is used to retrieve information about pending signals starting with the specified sequence number. Siginfo_t structures are copied from the child into the buffer starting at "data". The argument "addr" is a pointer to struct ptrace_peeksiginfo_args. struct ptrace_peeksiginfo_args { u64 off; /* from which siginfo to start */ u32 flags; s32 nr; /* how may siginfos to take */ }; "nr" has type "s32", because ptrace() returns "long", which has 32 bits on i386 and a negative values is used for errors. Currently here is only one flag PTRACE_PEEKSIGINFO_SHARED for dumping signals from process-wide queue. If this flag is not set, signals are read from a per-thread queue. The request PTRACE_PEEKSIGINFO returns a number of dumped signals. If a signal with the specified sequence number doesn't exist, ptrace returns zero. The request returns an error, if no signal has been dumped. Errors: EINVAL - one or more specified flags are not supported or nr is negative EFAULT - buf or addr is outside your accessible address space. A result siginfo contains a kernel part of si_code which usually striped, but it's required for queuing the same siginfo back during restore of pending signals. This functionality is required for checkpointing pending signals. Pedro Alves suggested using it in "gdb" to peek at pending signals. gdb already uses PTRACE_GETSIGINFO to get the siginfo for the signal which was already dequeued. This functionality allows gdb to look at the pending signals which were not reported yet. The prototype of this code was developed by Oleg Nesterov. Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:59 +08:00
static int ptrace_peek_siginfo(struct task_struct *child,
unsigned long addr,
unsigned long data)
{
struct ptrace_peeksiginfo_args arg;
struct sigpending *pending;
struct sigqueue *q;
int ret, i;
ret = copy_from_user(&arg, (void __user *) addr,
sizeof(struct ptrace_peeksiginfo_args));
if (ret)
return -EFAULT;
if (arg.flags & ~PTRACE_PEEKSIGINFO_SHARED)
return -EINVAL; /* unknown flags */
if (arg.nr < 0)
return -EINVAL;
if (arg.flags & PTRACE_PEEKSIGINFO_SHARED)
pending = &child->signal->shared_pending;
else
pending = &child->pending;
for (i = 0; i < arg.nr; ) {
siginfo_t info;
s32 off = arg.off + i;
spin_lock_irq(&child->sighand->siglock);
list_for_each_entry(q, &pending->list, list) {
if (!off--) {
copy_siginfo(&info, &q->info);
break;
}
}
spin_unlock_irq(&child->sighand->siglock);
if (off >= 0) /* beyond the end of the list */
break;
#ifdef CONFIG_COMPAT
if (unlikely(in_compat_syscall())) {
ptrace: add ability to retrieve signals without removing from a queue (v4) This patch adds a new ptrace request PTRACE_PEEKSIGINFO. This request is used to retrieve information about pending signals starting with the specified sequence number. Siginfo_t structures are copied from the child into the buffer starting at "data". The argument "addr" is a pointer to struct ptrace_peeksiginfo_args. struct ptrace_peeksiginfo_args { u64 off; /* from which siginfo to start */ u32 flags; s32 nr; /* how may siginfos to take */ }; "nr" has type "s32", because ptrace() returns "long", which has 32 bits on i386 and a negative values is used for errors. Currently here is only one flag PTRACE_PEEKSIGINFO_SHARED for dumping signals from process-wide queue. If this flag is not set, signals are read from a per-thread queue. The request PTRACE_PEEKSIGINFO returns a number of dumped signals. If a signal with the specified sequence number doesn't exist, ptrace returns zero. The request returns an error, if no signal has been dumped. Errors: EINVAL - one or more specified flags are not supported or nr is negative EFAULT - buf or addr is outside your accessible address space. A result siginfo contains a kernel part of si_code which usually striped, but it's required for queuing the same siginfo back during restore of pending signals. This functionality is required for checkpointing pending signals. Pedro Alves suggested using it in "gdb" to peek at pending signals. gdb already uses PTRACE_GETSIGINFO to get the siginfo for the signal which was already dequeued. This functionality allows gdb to look at the pending signals which were not reported yet. The prototype of this code was developed by Oleg Nesterov. Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:59 +08:00
compat_siginfo_t __user *uinfo = compat_ptr(data);
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
if (copy_siginfo_to_user32(uinfo, &info)) {
ret = -EFAULT;
break;
}
ptrace: add ability to retrieve signals without removing from a queue (v4) This patch adds a new ptrace request PTRACE_PEEKSIGINFO. This request is used to retrieve information about pending signals starting with the specified sequence number. Siginfo_t structures are copied from the child into the buffer starting at "data". The argument "addr" is a pointer to struct ptrace_peeksiginfo_args. struct ptrace_peeksiginfo_args { u64 off; /* from which siginfo to start */ u32 flags; s32 nr; /* how may siginfos to take */ }; "nr" has type "s32", because ptrace() returns "long", which has 32 bits on i386 and a negative values is used for errors. Currently here is only one flag PTRACE_PEEKSIGINFO_SHARED for dumping signals from process-wide queue. If this flag is not set, signals are read from a per-thread queue. The request PTRACE_PEEKSIGINFO returns a number of dumped signals. If a signal with the specified sequence number doesn't exist, ptrace returns zero. The request returns an error, if no signal has been dumped. Errors: EINVAL - one or more specified flags are not supported or nr is negative EFAULT - buf or addr is outside your accessible address space. A result siginfo contains a kernel part of si_code which usually striped, but it's required for queuing the same siginfo back during restore of pending signals. This functionality is required for checkpointing pending signals. Pedro Alves suggested using it in "gdb" to peek at pending signals. gdb already uses PTRACE_GETSIGINFO to get the siginfo for the signal which was already dequeued. This functionality allows gdb to look at the pending signals which were not reported yet. The prototype of this code was developed by Oleg Nesterov. Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:59 +08:00
} else
#endif
{
siginfo_t __user *uinfo = (siginfo_t __user *) data;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
if (copy_siginfo_to_user(uinfo, &info)) {
ret = -EFAULT;
break;
}
ptrace: add ability to retrieve signals without removing from a queue (v4) This patch adds a new ptrace request PTRACE_PEEKSIGINFO. This request is used to retrieve information about pending signals starting with the specified sequence number. Siginfo_t structures are copied from the child into the buffer starting at "data". The argument "addr" is a pointer to struct ptrace_peeksiginfo_args. struct ptrace_peeksiginfo_args { u64 off; /* from which siginfo to start */ u32 flags; s32 nr; /* how may siginfos to take */ }; "nr" has type "s32", because ptrace() returns "long", which has 32 bits on i386 and a negative values is used for errors. Currently here is only one flag PTRACE_PEEKSIGINFO_SHARED for dumping signals from process-wide queue. If this flag is not set, signals are read from a per-thread queue. The request PTRACE_PEEKSIGINFO returns a number of dumped signals. If a signal with the specified sequence number doesn't exist, ptrace returns zero. The request returns an error, if no signal has been dumped. Errors: EINVAL - one or more specified flags are not supported or nr is negative EFAULT - buf or addr is outside your accessible address space. A result siginfo contains a kernel part of si_code which usually striped, but it's required for queuing the same siginfo back during restore of pending signals. This functionality is required for checkpointing pending signals. Pedro Alves suggested using it in "gdb" to peek at pending signals. gdb already uses PTRACE_GETSIGINFO to get the siginfo for the signal which was already dequeued. This functionality allows gdb to look at the pending signals which were not reported yet. The prototype of this code was developed by Oleg Nesterov. Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:59 +08:00
}
data += sizeof(siginfo_t);
i++;
if (signal_pending(current))
break;
cond_resched();
}
if (i > 0)
return i;
return ret;
}
#ifdef PTRACE_SINGLESTEP
#define is_singlestep(request) ((request) == PTRACE_SINGLESTEP)
#else
#define is_singlestep(request) 0
#endif
#ifdef PTRACE_SINGLEBLOCK
#define is_singleblock(request) ((request) == PTRACE_SINGLEBLOCK)
#else
#define is_singleblock(request) 0
#endif
#ifdef PTRACE_SYSEMU
#define is_sysemu_singlestep(request) ((request) == PTRACE_SYSEMU_SINGLESTEP)
#else
#define is_sysemu_singlestep(request) 0
#endif
static int ptrace_resume(struct task_struct *child, long request,
unsigned long data)
{
ptrace: fix race between ptrace_resume() and wait_task_stopped() ptrace_resume() is called when the tracee is still __TASK_TRACED. We set tracee->exit_code and then wake_up_state() changes tracee->state. If the tracer's sub-thread does wait() in between, task_stopped_code(ptrace => T) wrongly looks like another report from tracee. This confuses debugger, and since wait_task_stopped() clears ->exit_code the tracee can miss a signal. Test-case: #include <stdio.h> #include <unistd.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <pthread.h> #include <assert.h> int pid; void *waiter(void *arg) { int stat; for (;;) { assert(pid == wait(&stat)); assert(WIFSTOPPED(stat)); if (WSTOPSIG(stat) == SIGHUP) continue; assert(WSTOPSIG(stat) == SIGCONT); printf("ERR! extra/wrong report:%x\n", stat); } } int main(void) { pthread_t thread; pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); for (;;) kill(getpid(), SIGHUP); } assert(pthread_create(&thread, NULL, waiter, NULL) == 0); for (;;) ptrace(PTRACE_CONT, pid, 0, SIGCONT); return 0; } Note for stable: the bug is very old, but without 9899d11f6544 "ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL" the fix should use lock_task_sighand(child). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Pavel Labath <labath@google.com> Tested-by: Pavel Labath <labath@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 03:47:29 +08:00
bool need_siglock;
if (!valid_signal(data))
return -EIO;
if (request == PTRACE_SYSCALL)
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
else
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
#ifdef TIF_SYSCALL_EMU
if (request == PTRACE_SYSEMU || request == PTRACE_SYSEMU_SINGLESTEP)
set_tsk_thread_flag(child, TIF_SYSCALL_EMU);
else
clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
#endif
if (is_singleblock(request)) {
if (unlikely(!arch_has_block_step()))
return -EIO;
user_enable_block_step(child);
} else if (is_singlestep(request) || is_sysemu_singlestep(request)) {
if (unlikely(!arch_has_single_step()))
return -EIO;
user_enable_single_step(child);
} else {
user_disable_single_step(child);
}
ptrace: fix race between ptrace_resume() and wait_task_stopped() ptrace_resume() is called when the tracee is still __TASK_TRACED. We set tracee->exit_code and then wake_up_state() changes tracee->state. If the tracer's sub-thread does wait() in between, task_stopped_code(ptrace => T) wrongly looks like another report from tracee. This confuses debugger, and since wait_task_stopped() clears ->exit_code the tracee can miss a signal. Test-case: #include <stdio.h> #include <unistd.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <pthread.h> #include <assert.h> int pid; void *waiter(void *arg) { int stat; for (;;) { assert(pid == wait(&stat)); assert(WIFSTOPPED(stat)); if (WSTOPSIG(stat) == SIGHUP) continue; assert(WSTOPSIG(stat) == SIGCONT); printf("ERR! extra/wrong report:%x\n", stat); } } int main(void) { pthread_t thread; pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); for (;;) kill(getpid(), SIGHUP); } assert(pthread_create(&thread, NULL, waiter, NULL) == 0); for (;;) ptrace(PTRACE_CONT, pid, 0, SIGCONT); return 0; } Note for stable: the bug is very old, but without 9899d11f6544 "ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL" the fix should use lock_task_sighand(child). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Pavel Labath <labath@google.com> Tested-by: Pavel Labath <labath@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 03:47:29 +08:00
/*
* Change ->exit_code and ->state under siglock to avoid the race
* with wait_task_stopped() in between; a non-zero ->exit_code will
* wrongly look like another report from tracee.
*
* Note that we need siglock even if ->exit_code == data and/or this
* status was not reported yet, the new status must not be cleared by
* wait_task_stopped() after resume.
*
* If data == 0 we do not care if wait_task_stopped() reports the old
* status and clears the code too; this can't race with the tracee, it
* takes siglock after resume.
*/
need_siglock = data && !thread_group_empty(current);
if (need_siglock)
spin_lock_irq(&child->sighand->siglock);
child->exit_code = data;
ptrace: ptrace_resume() shouldn't wake up !TASK_TRACED thread It is not clear why ptrace_resume() does wake_up_process(). Unless the caller is PTRACE_KILL the tracee should be TASK_TRACED so we can use wake_up_state(__TASK_TRACED). If sys_ptrace() races with SIGKILL we do not need the extra and potentionally spurious wakeup. If the caller is PTRACE_KILL, wake_up_process() is even more wrong. The tracee can sleep in any state in any place, and if we have a buggy code which doesn't handle a spurious wakeup correctly PTRACE_KILL can be used to exploit it. For example: int main(void) { int child, status; child = fork(); if (!child) { int ret; assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); ret = pause(); printf("pause: %d %m\n", ret); return 0x23; } sleep(1); assert(ptrace(PTRACE_KILL, child, 0,0) == 0); assert(child == wait(&status)); printf("wait: %x\n", status); return 0; } prints "pause: -1 Unknown error 514", -ERESTARTNOHAND leaks to the userland. In this case sys_pause() is buggy as well and should be fixed. I do not know what was the original rationality behind PTRACE_KILL. The man page is simply wrong and afaics it was always wrong. Imho it should be deprecated, or may be it should do send_sig(SIGKILL) as Denys suggests, but in any case I do not think that the current behaviour was intentional. Note: there is another problem, ptrace_resume() changes ->exit_code and this can race with SIGKILL too. Eventually we should change ptrace to not use ->exit_code. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-26 01:20:21 +08:00
wake_up_state(child, __TASK_TRACED);
ptrace: fix race between ptrace_resume() and wait_task_stopped() ptrace_resume() is called when the tracee is still __TASK_TRACED. We set tracee->exit_code and then wake_up_state() changes tracee->state. If the tracer's sub-thread does wait() in between, task_stopped_code(ptrace => T) wrongly looks like another report from tracee. This confuses debugger, and since wait_task_stopped() clears ->exit_code the tracee can miss a signal. Test-case: #include <stdio.h> #include <unistd.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <pthread.h> #include <assert.h> int pid; void *waiter(void *arg) { int stat; for (;;) { assert(pid == wait(&stat)); assert(WIFSTOPPED(stat)); if (WSTOPSIG(stat) == SIGHUP) continue; assert(WSTOPSIG(stat) == SIGCONT); printf("ERR! extra/wrong report:%x\n", stat); } } int main(void) { pthread_t thread; pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); for (;;) kill(getpid(), SIGHUP); } assert(pthread_create(&thread, NULL, waiter, NULL) == 0); for (;;) ptrace(PTRACE_CONT, pid, 0, SIGCONT); return 0; } Note for stable: the bug is very old, but without 9899d11f6544 "ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL" the fix should use lock_task_sighand(child). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Pavel Labath <labath@google.com> Tested-by: Pavel Labath <labath@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 03:47:29 +08:00
if (need_siglock)
spin_unlock_irq(&child->sighand->siglock);
return 0;
}
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
static const struct user_regset *
find_regset(const struct user_regset_view *view, unsigned int type)
{
const struct user_regset *regset;
int n;
for (n = 0; n < view->n; ++n) {
regset = view->regsets + n;
if (regset->core_note_type == type)
return regset;
}
return NULL;
}
static int ptrace_regset(struct task_struct *task, int req, unsigned int type,
struct iovec *kiov)
{
const struct user_regset_view *view = task_user_regset_view(task);
const struct user_regset *regset = find_regset(view, type);
int regset_no;
if (!regset || (kiov->iov_len % regset->size) != 0)
return -EINVAL;
regset_no = regset - view->regsets;
kiov->iov_len = min(kiov->iov_len,
(__kernel_size_t) (regset->n * regset->size));
if (req == PTRACE_GETREGSET)
return copy_regset_to_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
else
return copy_regset_from_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
}
/*
* This is declared in linux/regset.h and defined in machine-dependent
* code. We put the export here, near the primary machine-neutral use,
* to ensure no machine forgets it.
*/
EXPORT_SYMBOL_GPL(task_user_regset_view);
#endif
int ptrace_request(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
bool seized = child->ptrace & PT_SEIZED;
int ret = -EIO;
ptrace: implement PTRACE_LISTEN The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:18 +08:00
siginfo_t siginfo, *si;
void __user *datavp = (void __user *) data;
unsigned long __user *datalp = datavp;
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
unsigned long flags;
switch (request) {
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
return generic_ptrace_peekdata(child, addr, data);
case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
return generic_ptrace_pokedata(child, addr, data);
#ifdef PTRACE_OLDSETOPTIONS
case PTRACE_OLDSETOPTIONS:
#endif
case PTRACE_SETOPTIONS:
ret = ptrace_setoptions(child, data);
break;
case PTRACE_GETEVENTMSG:
ret = put_user(child->ptrace_message, datalp);
break;
ptrace: add ability to retrieve signals without removing from a queue (v4) This patch adds a new ptrace request PTRACE_PEEKSIGINFO. This request is used to retrieve information about pending signals starting with the specified sequence number. Siginfo_t structures are copied from the child into the buffer starting at "data". The argument "addr" is a pointer to struct ptrace_peeksiginfo_args. struct ptrace_peeksiginfo_args { u64 off; /* from which siginfo to start */ u32 flags; s32 nr; /* how may siginfos to take */ }; "nr" has type "s32", because ptrace() returns "long", which has 32 bits on i386 and a negative values is used for errors. Currently here is only one flag PTRACE_PEEKSIGINFO_SHARED for dumping signals from process-wide queue. If this flag is not set, signals are read from a per-thread queue. The request PTRACE_PEEKSIGINFO returns a number of dumped signals. If a signal with the specified sequence number doesn't exist, ptrace returns zero. The request returns an error, if no signal has been dumped. Errors: EINVAL - one or more specified flags are not supported or nr is negative EFAULT - buf or addr is outside your accessible address space. A result siginfo contains a kernel part of si_code which usually striped, but it's required for queuing the same siginfo back during restore of pending signals. This functionality is required for checkpointing pending signals. Pedro Alves suggested using it in "gdb" to peek at pending signals. gdb already uses PTRACE_GETSIGINFO to get the siginfo for the signal which was already dequeued. This functionality allows gdb to look at the pending signals which were not reported yet. The prototype of this code was developed by Oleg Nesterov. Signed-off-by: Andrew Vagin <avagin@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Alves <palves@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:59 +08:00
case PTRACE_PEEKSIGINFO:
ret = ptrace_peek_siginfo(child, addr, data);
break;
case PTRACE_GETSIGINFO:
ret = ptrace_getsiginfo(child, &siginfo);
if (!ret)
ret = copy_siginfo_to_user(datavp, &siginfo);
break;
case PTRACE_SETSIGINFO:
if (copy_from_user(&siginfo, datavp, sizeof siginfo))
ret = -EFAULT;
else
ret = ptrace_setsiginfo(child, &siginfo);
break;
case PTRACE_GETSIGMASK:
if (addr != sizeof(sigset_t)) {
ret = -EINVAL;
break;
}
if (copy_to_user(datavp, &child->blocked, sizeof(sigset_t)))
ret = -EFAULT;
else
ret = 0;
break;
case PTRACE_SETSIGMASK: {
sigset_t new_set;
if (addr != sizeof(sigset_t)) {
ret = -EINVAL;
break;
}
if (copy_from_user(&new_set, datavp, sizeof(sigset_t))) {
ret = -EFAULT;
break;
}
sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP));
/*
* Every thread does recalc_sigpending() after resume, so
* retarget_shared_pending() and recalc_sigpending() are not
* called here.
*/
spin_lock_irq(&child->sighand->siglock);
child->blocked = new_set;
spin_unlock_irq(&child->sighand->siglock);
ret = 0;
break;
}
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
case PTRACE_INTERRUPT:
/*
* Stop tracee without any side-effect on signal or job
* control. At least one trap is guaranteed to happen
* after this request. If @child is already trapped, the
* current trap is not disturbed and another trap will
* happen after the current trap is ended with PTRACE_CONT.
*
* The actual trap might not be PTRACE_EVENT_STOP trap but
* the pending condition is cleared regardless.
*/
if (unlikely(!seized || !lock_task_sighand(child, &flags)))
break;
ptrace: implement PTRACE_LISTEN The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:18 +08:00
/*
* INTERRUPT doesn't disturb existing trap sans one
* exception. If ptracer issued LISTEN for the current
* STOP, this INTERRUPT should clear LISTEN and re-trap
* tracee into STOP.
*/
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
if (likely(task_set_jobctl_pending(child, JOBCTL_TRAP_STOP)))
ptrace_signal_wake_up(child, child->jobctl & JOBCTL_LISTENING);
ptrace: implement PTRACE_LISTEN The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:18 +08:00
unlock_task_sighand(child, &flags);
ret = 0;
break;
case PTRACE_LISTEN:
/*
* Listen for events. Tracee must be in STOP. It's not
* resumed per-se but is not considered to be in TRACED by
* wait(2) or ptrace(2). If an async event (e.g. group
* stop state change) happens, tracee will enter STOP trap
* again. Alternatively, ptracer can issue INTERRUPT to
* finish listening and re-trap tracee into STOP.
*/
if (unlikely(!seized || !lock_task_sighand(child, &flags)))
break;
si = child->last_siginfo;
if (likely(si && (si->si_code >> 8) == PTRACE_EVENT_STOP)) {
child->jobctl |= JOBCTL_LISTENING;
/*
* If NOTIFY is set, it means event happened between
* start of this trap and now. Trigger re-trap.
*/
if (child->jobctl & JOBCTL_TRAP_NOTIFY)
ptrace_signal_wake_up(child, true);
ret = 0;
}
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
unlock_task_sighand(child, &flags);
break;
case PTRACE_DETACH: /* detach a process that was attached. */
ret = ptrace_detach(child, data);
break;
#ifdef CONFIG_BINFMT_ELF_FDPIC
case PTRACE_GETFDPIC: {
struct mm_struct *mm = get_task_mm(child);
unsigned long tmp = 0;
ret = -ESRCH;
if (!mm)
break;
switch (addr) {
case PTRACE_GETFDPIC_EXEC:
tmp = mm->context.exec_fdpic_loadmap;
break;
case PTRACE_GETFDPIC_INTERP:
tmp = mm->context.interp_fdpic_loadmap;
break;
default:
break;
}
mmput(mm);
ret = put_user(tmp, datalp);
break;
}
#endif
#ifdef PTRACE_SINGLESTEP
case PTRACE_SINGLESTEP:
#endif
#ifdef PTRACE_SINGLEBLOCK
case PTRACE_SINGLEBLOCK:
#endif
#ifdef PTRACE_SYSEMU
case PTRACE_SYSEMU:
case PTRACE_SYSEMU_SINGLESTEP:
#endif
case PTRACE_SYSCALL:
case PTRACE_CONT:
return ptrace_resume(child, request, data);
case PTRACE_KILL:
if (child->exit_state) /* already dead */
return 0;
return ptrace_resume(child, request, SIGKILL);
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
case PTRACE_GETREGSET:
case PTRACE_SETREGSET: {
struct iovec kiov;
struct iovec __user *uiov = datavp;
if (!access_ok(VERIFY_WRITE, uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(kiov.iov_base, &uiov->iov_base) ||
__get_user(kiov.iov_len, &uiov->iov_len))
return -EFAULT;
ret = ptrace_regset(child, request, addr, &kiov);
if (!ret)
ret = __put_user(kiov.iov_len, &uiov->iov_len);
break;
}
#endif
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 08:23:59 +08:00
case PTRACE_SECCOMP_GET_FILTER:
ret = seccomp_get_filter(child, addr, datavp);
break;
case PTRACE_SECCOMP_GET_METADATA:
ret = seccomp_get_metadata(child, addr, datavp);
break;
default:
break;
}
return ret;
}
static struct task_struct *ptrace_get_task_struct(pid_t pid)
{
struct task_struct *child;
rcu_read_lock();
child = find_task_by_vpid(pid);
if (child)
get_task_struct(child);
rcu_read_unlock();
if (!child)
return ERR_PTR(-ESRCH);
return child;
}
#ifndef arch_ptrace_attach
#define arch_ptrace_attach(child) do { } while (0)
#endif
SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr,
unsigned long, data)
{
struct task_struct *child;
long ret;
if (request == PTRACE_TRACEME) {
ret = ptrace_traceme();
if (!ret)
arch_ptrace_attach(current);
goto out;
}
child = ptrace_get_task_struct(pid);
if (IS_ERR(child)) {
ret = PTR_ERR(child);
goto out;
}
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
if (request == PTRACE_ATTACH || request == PTRACE_SEIZE) {
ret = ptrace_attach(child, request, addr, data);
/*
* Some architectures need to do book-keeping after
* a ptrace attach.
*/
if (!ret)
arch_ptrace_attach(child);
goto out_put_task_struct;
}
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
ret = ptrace_check_attach(child, request == PTRACE_KILL ||
request == PTRACE_INTERRUPT);
if (ret < 0)
goto out_put_task_struct;
ret = arch_ptrace(child, request, addr, data);
if (ret || request != PTRACE_DETACH)
ptrace_unfreeze_traced(child);
out_put_task_struct:
put_task_struct(child);
out:
return ret;
}
int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr,
unsigned long data)
{
unsigned long tmp;
int copied;
copied = ptrace_access_vm(tsk, addr, &tmp, sizeof(tmp), FOLL_FORCE);
if (copied != sizeof(tmp))
return -EIO;
return put_user(tmp, (unsigned long __user *)data);
}
int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr,
unsigned long data)
{
int copied;
copied = ptrace_access_vm(tsk, addr, &data, sizeof(data),
FOLL_FORCE | FOLL_WRITE);
return (copied == sizeof(data)) ? 0 : -EIO;
}
#if defined CONFIG_COMPAT
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data)
{
compat_ulong_t __user *datap = compat_ptr(data);
compat_ulong_t word;
siginfo_t siginfo;
int ret;
switch (request) {
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
ret = ptrace_access_vm(child, addr, &word, sizeof(word),
FOLL_FORCE);
if (ret != sizeof(word))
ret = -EIO;
else
ret = put_user(word, datap);
break;
case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
ret = ptrace_access_vm(child, addr, &data, sizeof(data),
FOLL_FORCE | FOLL_WRITE);
ret = (ret != sizeof(data) ? -EIO : 0);
break;
case PTRACE_GETEVENTMSG:
ret = put_user((compat_ulong_t) child->ptrace_message, datap);
break;
case PTRACE_GETSIGINFO:
ret = ptrace_getsiginfo(child, &siginfo);
if (!ret)
ret = copy_siginfo_to_user32(
(struct compat_siginfo __user *) datap,
&siginfo);
break;
case PTRACE_SETSIGINFO:
if (copy_siginfo_from_user32(
&siginfo, (struct compat_siginfo __user *) datap))
ret = -EFAULT;
else
ret = ptrace_setsiginfo(child, &siginfo);
break;
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
case PTRACE_GETREGSET:
case PTRACE_SETREGSET:
{
struct iovec kiov;
struct compat_iovec __user *uiov =
(struct compat_iovec __user *) datap;
compat_uptr_t ptr;
compat_size_t len;
if (!access_ok(VERIFY_WRITE, uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(ptr, &uiov->iov_base) ||
__get_user(len, &uiov->iov_len))
return -EFAULT;
kiov.iov_base = compat_ptr(ptr);
kiov.iov_len = len;
ret = ptrace_regset(child, request, addr, &kiov);
if (!ret)
ret = __put_user(kiov.iov_len, &uiov->iov_len);
break;
}
#endif
default:
ret = ptrace_request(child, request, addr, data);
}
return ret;
}
COMPAT_SYSCALL_DEFINE4(ptrace, compat_long_t, request, compat_long_t, pid,
compat_long_t, addr, compat_long_t, data)
{
struct task_struct *child;
long ret;
if (request == PTRACE_TRACEME) {
ret = ptrace_traceme();
goto out;
}
child = ptrace_get_task_struct(pid);
if (IS_ERR(child)) {
ret = PTR_ERR(child);
goto out;
}
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:15 +08:00
if (request == PTRACE_ATTACH || request == PTRACE_SEIZE) {
ret = ptrace_attach(child, request, addr, data);
/*
* Some architectures need to do book-keeping after
* a ptrace attach.
*/
if (!ret)
arch_ptrace_attach(child);
goto out_put_task_struct;
}
ptrace: implement PTRACE_INTERRUPT Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 17:20:16 +08:00
ret = ptrace_check_attach(child, request == PTRACE_KILL ||
request == PTRACE_INTERRUPT);
if (!ret) {
ret = compat_arch_ptrace(child, request, addr, data);
if (ret || request != PTRACE_DETACH)
ptrace_unfreeze_traced(child);
}
out_put_task_struct:
put_task_struct(child);
out:
return ret;
}
#endif /* CONFIG_COMPAT */