renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
Code
e90004d56b
linux-next/kernel/bpf/stackmap.c

281 lines
7.3 KiB
C
Raw Normal View History

bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
/* Copyright (c) 2016 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*/
#include <linux/bpf.h>
#include <linux/jhash.h>
#include <linux/filter.h>
#include <linux/stacktrace.h>
#include <linux/perf_event.h>
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
#include "percpu_freelist.h"
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
bpf: Add file mode configuration into bpf maps Introduce the map read/write flags to the eBPF syscalls that returns the map fd. The flags is used to set up the file mode when construct a new file descriptor for bpf maps. To not break the backward capability, the f_flags is set to O_RDWR if the flag passed by syscall is 0. Otherwise it should be O_RDONLY or O_WRONLY. When the userspace want to modify or read the map content, it will check the file mode to see if it is allowed to make the change. Signed-off-by: Chenbo Feng <fengc@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 04:00:22 +08:00
#define STACK_CREATE_FLAG_MASK \
(BPF_F_NUMA_NODE | BPF_F_RDONLY | BPF_F_WRONLY)
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
struct stack_map_bucket {
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
struct pcpu_freelist_node fnode;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
u32 hash;
u32 nr;
u64 ip[];
};
struct bpf_stack_map {
struct bpf_map map;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
void *elems;
struct pcpu_freelist freelist;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
u32 n_buckets;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
struct stack_map_bucket *buckets[];
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
};
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
static int prealloc_elems_and_freelist(struct bpf_stack_map *smap)
{
u32 elem_size = sizeof(struct stack_map_bucket) + smap->map.value_size;
int err;
bpf: Allow selecting numa node during map creation The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19 02:28:00 +08:00
smap->elems = bpf_map_area_alloc(elem_size * smap->map.max_entries,
smap->map.numa_node);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
if (!smap->elems)
return -ENOMEM;
err = pcpu_freelist_init(&smap->freelist);
if (err)
goto free_elems;
pcpu_freelist_populate(&smap->freelist, smap->elems, elem_size,
smap->map.max_entries);
return 0;
free_elems:
bpf: don't trigger OOM killer under pressure with map alloc This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(), that are to be used for map allocations. Using kmalloc() for very large allocations can cause excessive work within the page allocator, so i) fall back earlier to vmalloc() when the attempt is considered costly anyway, and even more importantly ii) don't trigger OOM killer with any of the allocators. Since this is based on a user space request, for example, when creating maps with element pre-allocation, we really want such requests to fail instead of killing other user space processes. Also, don't spam the kernel log with warnings should any of the allocations fail under pressure. Given that, we can make backend selection in bpf_map_area_alloc() generic, and convert all maps over to use this API for spots with potentially large allocation requests. Note, replacing the one kmalloc_array() is fine as overflow checks happen earlier in htab_map_alloc(), since it must also protect the multiplication for vmalloc() should kmalloc_array() fail. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 22:14:17 +08:00
bpf_map_area_free(smap->elems);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
return err;
}
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
/* Called from syscall */
static struct bpf_map *stack_map_alloc(union bpf_attr *attr)
{
u32 value_size = attr->value_size;
struct bpf_stack_map *smap;
u64 cost, n_buckets;
int err;
if (!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
bpf: Add file mode configuration into bpf maps Introduce the map read/write flags to the eBPF syscalls that returns the map fd. The flags is used to set up the file mode when construct a new file descriptor for bpf maps. To not break the backward capability, the f_flags is set to O_RDWR if the flag passed by syscall is 0. Otherwise it should be O_RDONLY or O_WRONLY. When the userspace want to modify or read the map content, it will check the file mode to see if it is allowed to make the change. Signed-off-by: Chenbo Feng <fengc@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 04:00:22 +08:00
if (attr->map_flags & ~STACK_CREATE_FLAG_MASK)
bpf: check for reserved flag bits in array and stack maps Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:16 +08:00
return ERR_PTR(-EINVAL);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
/* check sanity of attributes */
if (attr->max_entries == 0 || attr->key_size != 4 ||
value_size < 8 || value_size % 8 ||
perf core: Allow setting up max frame stack depth via sysctl The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 23:28:50 +08:00
value_size / 8 > sysctl_perf_event_max_stack)
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
return ERR_PTR(-EINVAL);
/* hash table size must be power of 2 */
n_buckets = roundup_pow_of_two(attr->max_entries);
cost = n_buckets * sizeof(struct stack_map_bucket *) + sizeof(*smap);
if (cost >= U32_MAX - PAGE_SIZE)
return ERR_PTR(-E2BIG);
bpf: Allow selecting numa node during map creation The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19 02:28:00 +08:00
smap = bpf_map_area_alloc(cost, bpf_map_attr_numa_node(attr));
bpf: don't trigger OOM killer under pressure with map alloc This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(), that are to be used for map allocations. Using kmalloc() for very large allocations can cause excessive work within the page allocator, so i) fall back earlier to vmalloc() when the attempt is considered costly anyway, and even more importantly ii) don't trigger OOM killer with any of the allocators. Since this is based on a user space request, for example, when creating maps with element pre-allocation, we really want such requests to fail instead of killing other user space processes. Also, don't spam the kernel log with warnings should any of the allocations fail under pressure. Given that, we can make backend selection in bpf_map_area_alloc() generic, and convert all maps over to use this API for spots with potentially large allocation requests. Note, replacing the one kmalloc_array() is fine as overflow checks happen earlier in htab_map_alloc(), since it must also protect the multiplication for vmalloc() should kmalloc_array() fail. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 22:14:17 +08:00
if (!smap)
return ERR_PTR(-ENOMEM);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
err = -E2BIG;
cost += n_buckets * (value_size + sizeof(struct stack_map_bucket));
if (cost >= U32_MAX - PAGE_SIZE)
goto free_smap;
smap->map.map_type = attr->map_type;
smap->map.key_size = attr->key_size;
smap->map.value_size = value_size;
smap->map.max_entries = attr->max_entries;
bpf: fix wrong exposure of map_flags into fdinfo for lpm trie_alloc() always needs to have BPF_F_NO_PREALLOC passed in via attr->map_flags, since it does not support preallocation yet. We check the flag, but we never copy the flag into trie->map.map_flags, which is later on exposed into fdinfo and used by loaders such as iproute2. Latter uses this in bpf_map_selfcheck_pinned() to test whether a pinned map has the same spec as the one from the BPF obj file and if not, bails out, which is currently the case for lpm since it exposes always 0 as flags. Also copy over flags in array_map_alloc() and stack_map_alloc(). They always have to be 0 right now, but we should make sure to not miss to copy them over at a later point in time when we add actual flags for them to use. Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation") Reported-by: Jarno Rajahalme <jarno@covalent.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25 07:05:08 +08:00
smap->map.map_flags = attr->map_flags;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
smap->n_buckets = n_buckets;
smap->map.pages = round_up(cost, PAGE_SIZE) >> PAGE_SHIFT;
bpf: Allow selecting numa node during map creation The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19 02:28:00 +08:00
smap->map.numa_node = bpf_map_attr_numa_node(attr);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
err = bpf_map_precharge_memlock(smap->map.pages);
if (err)
goto free_smap;
perf core: Per event callchain limit Additionally to being able to control the system wide maximum depth via /proc/sys/kernel/perf_event_max_stack, now we are able to ask for different depths per event, using perf_event_attr.sample_max_stack for that. This uses an u16 hole at the end of perf_event_attr, that, when perf_event_attr.sample_type has the PERF_SAMPLE_CALLCHAIN, if sample_max_stack is zero, means use perf_event_max_stack, otherwise it'll be bounds checked under callchain_mutex. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 00:16:33 +08:00
err = get_callchain_buffers(sysctl_perf_event_max_stack);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
if (err)
goto free_smap;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
err = prealloc_elems_and_freelist(smap);
if (err)
goto put_buffers;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
return &smap->map;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
put_buffers:
put_callchain_buffers();
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
free_smap:
bpf: don't trigger OOM killer under pressure with map alloc This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(), that are to be used for map allocations. Using kmalloc() for very large allocations can cause excessive work within the page allocator, so i) fall back earlier to vmalloc() when the attempt is considered costly anyway, and even more importantly ii) don't trigger OOM killer with any of the allocators. Since this is based on a user space request, for example, when creating maps with element pre-allocation, we really want such requests to fail instead of killing other user space processes. Also, don't spam the kernel log with warnings should any of the allocations fail under pressure. Given that, we can make backend selection in bpf_map_area_alloc() generic, and convert all maps over to use this API for spots with potentially large allocation requests. Note, replacing the one kmalloc_array() is fine as overflow checks happen earlier in htab_map_alloc(), since it must also protect the multiplication for vmalloc() should kmalloc_array() fail. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 22:14:17 +08:00
bpf_map_area_free(smap);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
return ERR_PTR(err);
}
bpf: add BPF_CALL_x macros for declaring helpers This work adds BPF_CALL_<n>() macros and converts all the eBPF helper functions to use them, in a similar fashion like we do with SYSCALL_DEFINE<n>() macros that are used today. Motivation for this is to hide all the register handling and all necessary casts from the user, so that it is done automatically in the background when adding a BPF_CALL_<n>() call. This makes current helpers easier to review, eases to write future helpers, avoids getting the casting mess wrong, and allows for extending all helpers at once (f.e. build time checks, etc). It also helps detecting more easily in code reviews that unused registers are not instrumented in the code by accident, breaking compatibility with existing programs. BPF_CALL_<n>() internals are quite similar to SYSCALL_DEFINE<n>() ones with some fundamental differences, for example, for generating the actual helper function that carries all u64 regs, we need to fill unused regs, so that we always end up with 5 u64 regs as an argument. I reviewed several 0-5 generated BPF_CALL_<n>() variants of the .i results and they look all as expected. No sparse issue spotted. We let this also sit for a few days with Fengguang's kbuild test robot, and there were no issues seen. On s390, it barked on the "uses dynamic stack allocation" notice, which is an old one from bpf_perf_event_output{,_tp}() reappearing here due to the conversion to the call wrapper, just telling that the perf raw record/frag sits on stack (gcc with s390's -mwarn-dynamicstack), but that's all. Did various runtime tests and they were fine as well. All eBPF helpers are now converted to use these macros, getting rid of a good chunk of all the raw castings. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09 08:45:31 +08:00
BPF_CALL_3(bpf_get_stackid, struct pt_regs *, regs, struct bpf_map *, map,
u64, flags)
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
struct perf_callchain_entry *trace;
struct stack_map_bucket *bucket, *new_bucket, *old_bucket;
u32 max_depth = map->value_size / 8;
perf core: Allow setting up max frame stack depth via sysctl The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 23:28:50 +08:00
/* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
u32 init_nr = sysctl_perf_event_max_stack - max_depth;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
u32 hash, id, trace_nr, trace_len;
bool user = flags & BPF_F_USER_STACK;
bool kernel = !user;
u64 *ips;
if (unlikely(flags & ~(BPF_F_SKIP_FIELD_MASK | BPF_F_USER_STACK |
BPF_F_FAST_STACK_CMP | BPF_F_REUSE_STACKID)))
return -EINVAL;
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 23:30:53 +08:00
trace = get_perf_callchain(regs, init_nr, kernel, user,
sysctl_perf_event_max_stack, false, false);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
if (unlikely(!trace))
/* couldn't fetch the stack trace */
return -EFAULT;
/* get_perf_callchain() guarantees that trace->nr >= init_nr
perf core: Allow setting up max frame stack depth via sysctl The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 23:28:50 +08:00
* and trace-nr <= sysctl_perf_event_max_stack, so trace_nr <= max_depth
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
*/
trace_nr = trace->nr - init_nr;
if (trace_nr <= skip)
/* skipping more than usable stack trace */
return -EFAULT;
trace_nr -= skip;
trace_len = trace_nr * sizeof(u64);
ips = trace->ip + skip + init_nr;
hash = jhash2((u32 *)ips, trace_len / sizeof(u32), 0);
id = hash & (smap->n_buckets - 1);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
bucket = READ_ONCE(smap->buckets[id]);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
if (bucket && bucket->hash == hash) {
if (flags & BPF_F_FAST_STACK_CMP)
return id;
if (bucket->nr == trace_nr &&
memcmp(bucket->ip, ips, trace_len) == 0)
return id;
}
/* this call stack is not in the map, try to add it */
if (bucket && !(flags & BPF_F_REUSE_STACKID))
return -EEXIST;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
new_bucket = (struct stack_map_bucket *)
pcpu_freelist_pop(&smap->freelist);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
if (unlikely(!new_bucket))
return -ENOMEM;
memcpy(new_bucket->ip, ips, trace_len);
new_bucket->hash = hash;
new_bucket->nr = trace_nr;
old_bucket = xchg(&smap->buckets[id], new_bucket);
if (old_bucket)
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
pcpu_freelist_push(&smap->freelist, &old_bucket->fnode);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
return id;
}
const struct bpf_func_proto bpf_get_stackid_proto = {
.func = bpf_get_stackid,
.gpl_only = true,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_CONST_MAP_PTR,
.arg3_type = ARG_ANYTHING,
};
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
/* Called from eBPF program */
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
static void *stack_map_lookup_elem(struct bpf_map *map, void *key)
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
{
return NULL;
}
/* Called from syscall */
int bpf_stackmap_copy(struct bpf_map *map, void *key, void *value)
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
struct stack_map_bucket *bucket, *old_bucket;
u32 id = *(u32 *)key, trace_len;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
if (unlikely(id >= smap->n_buckets))
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
return -ENOENT;
bucket = xchg(&smap->buckets[id], NULL);
if (!bucket)
return -ENOENT;
trace_len = bucket->nr * sizeof(u64);
memcpy(value, bucket->ip, trace_len);
memset(value + trace_len, 0, map->value_size - trace_len);
old_bucket = xchg(&smap->buckets[id], bucket);
if (old_bucket)
pcpu_freelist_push(&smap->freelist, &old_bucket->fnode);
return 0;
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
}
static int stack_map_get_next_key(struct bpf_map *map, void *key, void *next_key)
{
return -EINVAL;
}
static int stack_map_update_elem(struct bpf_map *map, void *key, void *value,
u64 map_flags)
{
return -EINVAL;
}
/* Called from syscall or from eBPF program */
static int stack_map_delete_elem(struct bpf_map *map, void *key)
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
struct stack_map_bucket *old_bucket;
u32 id = *(u32 *)key;
if (unlikely(id >= smap->n_buckets))
return -E2BIG;
old_bucket = xchg(&smap->buckets[id], NULL);
if (old_bucket) {
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
pcpu_freelist_push(&smap->freelist, &old_bucket->fnode);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
return 0;
} else {
return -ENOENT;
}
}
/* Called when map->refcnt goes to zero, either from workqueue or from syscall */
static void stack_map_free(struct bpf_map *map)
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
/* wait for bpf programs to complete before freeing stack map */
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
synchronize_rcu();
bpf: don't trigger OOM killer under pressure with map alloc This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(), that are to be used for map allocations. Using kmalloc() for very large allocations can cause excessive work within the page allocator, so i) fall back earlier to vmalloc() when the attempt is considered costly anyway, and even more importantly ii) don't trigger OOM killer with any of the allocators. Since this is based on a user space request, for example, when creating maps with element pre-allocation, we really want such requests to fail instead of killing other user space processes. Also, don't spam the kernel log with warnings should any of the allocations fail under pressure. Given that, we can make backend selection in bpf_map_area_alloc() generic, and convert all maps over to use this API for spots with potentially large allocation requests. Note, replacing the one kmalloc_array() is fine as overflow checks happen earlier in htab_map_alloc(), since it must also protect the multiplication for vmalloc() should kmalloc_array() fail. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 22:14:17 +08:00
bpf_map_area_free(smap->elems);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:57:17 +08:00
pcpu_freelist_destroy(&smap->freelist);
bpf: don't trigger OOM killer under pressure with map alloc This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(), that are to be used for map allocations. Using kmalloc() for very large allocations can cause excessive work within the page allocator, so i) fall back earlier to vmalloc() when the attempt is considered costly anyway, and even more importantly ii) don't trigger OOM killer with any of the allocators. Since this is based on a user space request, for example, when creating maps with element pre-allocation, we really want such requests to fail instead of killing other user space processes. Also, don't spam the kernel log with warnings should any of the allocations fail under pressure. Given that, we can make backend selection in bpf_map_area_alloc() generic, and convert all maps over to use this API for spots with potentially large allocation requests. Note, replacing the one kmalloc_array() is fine as overflow checks happen earlier in htab_map_alloc(), since it must also protect the multiplication for vmalloc() should kmalloc_array() fail. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 22:14:17 +08:00
bpf_map_area_free(smap);
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
put_callchain_buffers();
}
bpf: remove struct bpf_map_type_list There's no need to have struct bpf_map_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to the types header file added by the previous patch and include it in the same fashion. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11 21:34:58 +08:00
const struct bpf_map_ops stack_map_ops = {
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:58:58 +08:00
.map_alloc = stack_map_alloc,
.map_free = stack_map_free,
.map_get_next_key = stack_map_get_next_key,
.map_lookup_elem = stack_map_lookup_elem,
.map_update_elem = stack_map_update_elem,
.map_delete_elem = stack_map_delete_elem,
};
Copy Permalink