renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
Code
e7487c86dc
linux-next/net/wireless/nl80211.h

98 lines
3.7 KiB
C
Raw Normal View History

[NL80211]: add netlink interface to cfg80211 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-21 01:09:35 +08:00
#ifndef __NET_WIRELESS_NL80211_H
#define __NET_WIRELESS_NL80211_H
#include "core.h"
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
int nl80211_init(void);
void nl80211_exit(void);
cfg80211: send events when devices are added/removed We're currently sending NEW_WIPHY events for renames (which is a bit odd, but now can't be changed), but also send them for really new devices that register. Also send DEL_WIPHY events when a device is removed, the event ID for this was already reserved. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26 19:52:25 +08:00
void nl80211_notify_wiphy(struct cfg80211_registered_device *rdev,
enum nl80211_commands cmd);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
nl80211: move scan API to wdev The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-19 01:17:03 +08:00
struct wireless_dev *wdev);
cfg80211: send scan results from work queue Due to the previous commit, when a scan finishes, it is in theory possible to hit the following sequence: 1. interface starts being removed 2. scan is cancelled by driver and cfg80211 is notified 3. scan done work is scheduled 4. interface is removed completely, rdev->scan_req is freed, event sent to userspace but scan done work remains pending 5. new scan is requested on another virtual interface 6. scan done work runs, freeing the still-running scan To fix this situation, hang on to the scan done message and block new scans while that is the case, and only send the message from the work function, regardless of whether the scan_req is already freed from interface removal. This makes step 5 above impossible and changes step 6 to be 5. scan done work runs, sending the scan done message As this can't work for wext, so we send the message immediately, but this shouldn't be an issue since we still return -EBUSY. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-22 17:14:19 +08:00
struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, bool aborted);
void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
struct sk_buff *msg);
cfg80211/nl80211: add support for scheduled scans Implement new functionality for scheduled scan offload. With this feature we can scan automatically at certain intervals. The idea is that the hardware can perform scan automatically and filter on desired results without waking up the host unnecessarily. Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN commands to the nl80211 interface. When results are available they are reported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is informed when the scheduled scan has stopped with a NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11 22:09:35 +08:00
void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 cmd);
void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
struct net_device *netdev);
cfg80211: allow wiphy specific regdomain management Add a new regulatory flag that allows a driver to manage regdomain changes/updates for its own wiphy. A self-managed wiphys only employs regulatory information obtained from the FW and driver and does not use other cfg80211 sources like beacon-hints, country-code IEs and hints from other devices on the same system. Conversely, a self-managed wiphy does not share its regulatory hints with other devices in the system. If a system contains several devices, one or more of which are self-managed, there might be contradictory regulatory settings between them. Usage of flag is generally discouraged. Only use it if the FW/driver is incompatible with non-locally originated hints. A new API lets the driver send a complete regdomain, to be applied on its wiphy only. After a wiphy-specific regdomain change takes place, usermode will get a new type of change notification. The regulatory core also takes care enforce regulatory restrictions, in case some interfaces are on forbidden channels. Signed-off-by: Jonathan Doron <jonathanx.doron@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-16 01:26:00 +08:00
void nl80211_common_reg_change_event(enum nl80211_commands cmd_id,
struct regulatory_request *request);
static inline void
nl80211_send_reg_change_event(struct regulatory_request *request)
{
nl80211_common_reg_change_event(NL80211_CMD_REG_CHANGE, request);
}
static inline void
nl80211_send_wiphy_reg_change_event(struct regulatory_request *request)
{
nl80211_common_reg_change_event(NL80211_CMD_WIPHY_REG_CHANGE, request);
}
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:47 +08:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211/mac80211: add wmm info to assoc event Userspace might need to know what queues are configured for uapsd (e.g. for setting proper default values in tspecs). Add this bitmap to the association event (inside wmm nested attribute) Add additional parameter to cfg80211_rx_assoc_resp, and update its callers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-09 22:09:45 +08:00
const u8 *buf, size_t len, gfp_t gfp,
int uapsd_queues);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:47 +08:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:47 +08:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:47 +08:00
const u8 *addr, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
nl80211: Generate deauth/disassoc event for locally generated frames Previously, nl80211 mlme events were generated only for received deauthentication and disassociation frames. We need to do the same for locally generated ones in order to let applications know that we disconnected (e.g., when AP does not reply to a probe). Rename the nl80211 and cfg80211 functions (s/rx_//) to make it clearer that they are used for both received and locally generated frames. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-28 02:53:56 +08:00
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:47 +08:00
const u8 *addr, gfp_t gfp);
cfg80211: connect/disconnect API This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:54 +08:00
void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
cfg80211: Allow cfg80211_connect_result() errors to be distinguished Previously, the status parameter to cfg80211_connect_result() was documented as using WLAN_STATUS_UNSPECIFIED_FAILURE (1) when the real status code for the failure is not known. This value can be used by an AP (and often is) and as such, user space cannot distinguish between explicitly rejected authentication/association and not being able to even try to associate or not receiving a response from the AP. Add a new inline function, cfg80211_connect_timeout(), to be used when the driver knows that the connection attempt failed due to a reason where connection could not be attempt or no response was received from the AP. The internal functions now allow a negative status value (-1) to be used as an indication of this special case. This results in the NL80211_ATTR_TIMED_OUT to be added to the NL80211_CMD_CONNECT event to allow user space to determine this case was hit. For backwards compatibility, NL80211_STATUS_CODE with the value WLAN_STATUS_UNSPECIFIED_FAILURE is still indicated in the event in such a case. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [johannes: fix cfg80211_connect_bss() prototype to use int for status, add cfg80211_connect_timeout() to docbook, fix docbook] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-31 05:16:50 +08:00
int status, gfp_t gfp);
cfg80211: connect/disconnect API This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:54 +08:00
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u16 reason,
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 09:56:11 +08:00
const u8 *ie, size_t ie_len, bool from_ap);
cfg80211: connect/disconnect API This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:54 +08:00
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void
nl80211: Add Michael MIC failure event Define a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be used to notify user space about locally detected Michael MIC failures. This matches with the MLME-MICHAELMICFAILURE.indication() primitive. Since we do not actually have TSC in the skb anymore when mac80211_ev_michael_mic_failure() is called, that function is changed to take in the TSC as an optional parameter instead of as a requirement to include the TSC after the hdr field (which we did not really follow). For now, TSC is not included in the events from mac80211, but it could be added at some point. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-28 03:59:49 +08:00
nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:47 +08:00
int key_id, const u8 *tsc, gfp_t gfp);
[NL80211]: add netlink interface to cfg80211 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-21 01:09:35 +08:00
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 03:26:46 +08:00
void
cfg80211: send regulatory beacon hint events to userspace This informs userspace when a change has occured on a world roaming wiphy's channel which has lifted some restrictions due to a regulatory beacon hint. Because this is now sent to userspace through the regulatory multicast group we remove the debug prints we used to use as they are no longer necessary. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-03 02:08:09 +08:00
nl80211_send_beacon_hint_event(struct wiphy *wiphy,
struct ieee80211_channel *channel_before,
struct ieee80211_channel *channel_after);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 03:24:32 +08:00
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
gfp_t gfp);
cfg80211/mac80211: extensible frame processing Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-12 21:38:38 +08:00
int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
cfg80211: use wdev in mgmt-tx/ROC APIs The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-15 21:30:18 +08:00
struct wireless_dev *wdev, u32 nlpid,
cfg80211/mac80211: report signal strength for mgmt frames Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06 05:18:41 +08:00
int freq, int sig_dbm,
cfg80211: add flags to cfg80211_rx_mgmt() Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-15 19:51:28 +08:00
const u8 *buf, size_t len, u32 flags, gfp_t gfp);
nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-09 01:16:19 +08:00
void
nl80211_radar_notify(struct cfg80211_registered_device *rdev,
cfg80211/mac80211: DFS setup chandef for cac event To report channel width correctly we have to send correct channel parameters from mac80211 when calling cfg80211_cac_event(). This is required in case of using channel width higher than 20MHz and we have to set correct dfs channel state after CAC (NL80211_DFS_AVAILABLE). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-06 20:55:51 +08:00
const struct cfg80211_chan_def *chandef,
nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-09 01:16:19 +08:00
enum nl80211_radar_event event,
struct net_device *netdev, gfp_t gfp);
nl80211: send event when AP operation is stopped There are a few cases, e.g. suspend, where an AP interface is stopped by the kernel rather than by userspace request, most commonly when suspending. To let userspace know about this, send the NL80211_CMD_STOP_AP command as an event every time an AP interface is stopped. This also happens when userspace did in fact request the AP stop, but that's not a problem. For full-MAC drivers this may need to be extended to also cover cases where the device stopped the AP operation for some reason, this a bit more complicated because then all cfg80211 state also needs to be reset; such API is not part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-24 21:06:29 +08:00
void nl80211_send_ap_stopped(struct wireless_dev *wdev);
cfg80211/nl80211: Add packet coalesce support In most cases, host that receives IPv4 and IPv6 multicast/broadcast packets does not do anything with these packets. Therefore the reception of these unwanted packets causes unnecessary processing and power consumption. Packet coalesce feature helps to reduce number of received interrupts to host by buffering these packets in firmware/hardware for some predefined time. Received interrupt will be generated when one of the following events occur. a) Expiration of hardware timer whose expiration time is set to maximum coalescing delay of matching coalesce rule. b) Coalescing buffer in hardware reaches it's limit. c) Packet doesn't match any of the configured coalesce rules. This patch adds set/get configuration support for packet coalesce. User needs to configure following parameters for creating a coalesce rule. a) Maximum coalescing delay b) List of packet patterns which needs to be matched c) Condition for coalescence. pattern 'match' or 'no match' Multiple such rules can be created. This feature needs to be advertised during driver initialization. Drivers are supposed to do required firmware/hardware settings based on user configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [fix kernel-doc, change free function, fix copy/paste error] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-29 02:51:26 +08:00
void cfg80211_rdev_free_coalesce(struct cfg80211_registered_device *rdev);
[NL80211]: add netlink interface to cfg80211 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-21 01:09:35 +08:00
#endif /* __NET_WIRELESS_NL80211_H */
Copy Permalink