renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code
e6a08c5a89
linux-next/sound/soc/codecs/wm8988.c

1026 lines
28 KiB
C
Raw Normal View History

ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
/*
* wm8988.c -- WM8988 ALSA SoC audio driver
*
* Copyright 2009 Wolfson Microelectronics plc
* Copyright 2005 Openedhand Ltd.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include "wm8988.h"
/*
* wm8988 register cache
* We can't read the WM8988 register space when we
* are using 2 wire for device control, so we cache them instead.
*/
static const u16 wm8988_reg[] = {
0x0097, 0x0097, 0x0079, 0x0079, /* 0 */
0x0000, 0x0008, 0x0000, 0x000a, /* 4 */
0x0000, 0x0000, 0x00ff, 0x00ff, /* 8 */
0x000f, 0x000f, 0x0000, 0x0000, /* 12 */
0x0000, 0x007b, 0x0000, 0x0032, /* 16 */
0x0000, 0x00c3, 0x00c3, 0x00c0, /* 20 */
0x0000, 0x0000, 0x0000, 0x0000, /* 24 */
0x0000, 0x0000, 0x0000, 0x0000, /* 28 */
0x0000, 0x0000, 0x0050, 0x0050, /* 32 */
0x0050, 0x0050, 0x0050, 0x0050, /* 36 */
0x0079, 0x0079, 0x0079, /* 40 */
};
/* codec private data */
struct wm8988_priv {
unsigned int sysclk;
struct snd_soc_codec codec;
struct snd_pcm_hw_constraint_list *sysclk_constraints;
u16 reg_cache[WM8988_NUM_REG];
};
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
#define wm8988_reset(c) snd_soc_write(c, WM8988_RESET, 0)
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
/*
* WM8988 Controls
*/
static const char *bass_boost_txt[] = {"Linear Control", "Adaptive Boost"};
static const struct soc_enum bass_boost =
SOC_ENUM_SINGLE(WM8988_BASS, 7, 2, bass_boost_txt);
static const char *bass_filter_txt[] = { "130Hz @ 48kHz", "200Hz @ 48kHz" };
static const struct soc_enum bass_filter =
SOC_ENUM_SINGLE(WM8988_BASS, 6, 2, bass_filter_txt);
static const char *treble_txt[] = {"8kHz", "4kHz"};
static const struct soc_enum treble =
SOC_ENUM_SINGLE(WM8988_TREBLE, 6, 2, treble_txt);
static const char *stereo_3d_lc_txt[] = {"200Hz", "500Hz"};
static const struct soc_enum stereo_3d_lc =
SOC_ENUM_SINGLE(WM8988_3D, 5, 2, stereo_3d_lc_txt);
static const char *stereo_3d_uc_txt[] = {"2.2kHz", "1.5kHz"};
static const struct soc_enum stereo_3d_uc =
SOC_ENUM_SINGLE(WM8988_3D, 6, 2, stereo_3d_uc_txt);
static const char *stereo_3d_func_txt[] = {"Capture", "Playback"};
static const struct soc_enum stereo_3d_func =
SOC_ENUM_SINGLE(WM8988_3D, 7, 2, stereo_3d_func_txt);
static const char *alc_func_txt[] = {"Off", "Right", "Left", "Stereo"};
static const struct soc_enum alc_func =
SOC_ENUM_SINGLE(WM8988_ALC1, 7, 4, alc_func_txt);
static const char *ng_type_txt[] = {"Constant PGA Gain",
"Mute ADC Output"};
static const struct soc_enum ng_type =
SOC_ENUM_SINGLE(WM8988_NGATE, 1, 2, ng_type_txt);
static const char *deemph_txt[] = {"None", "32Khz", "44.1Khz", "48Khz"};
static const struct soc_enum deemph =
SOC_ENUM_SINGLE(WM8988_ADCDAC, 1, 4, deemph_txt);
static const char *adcpol_txt[] = {"Normal", "L Invert", "R Invert",
"L + R Invert"};
static const struct soc_enum adcpol =
SOC_ENUM_SINGLE(WM8988_ADCDAC, 5, 4, adcpol_txt);
static const DECLARE_TLV_DB_SCALE(pga_tlv, -1725, 75, 0);
static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
static const struct snd_kcontrol_new wm8988_snd_controls[] = {
SOC_ENUM("Bass Boost", bass_boost),
SOC_ENUM("Bass Filter", bass_filter),
SOC_SINGLE("Bass Volume", WM8988_BASS, 0, 15, 1),
SOC_SINGLE("Treble Volume", WM8988_TREBLE, 0, 15, 0),
SOC_ENUM("Treble Cut-off", treble),
SOC_SINGLE("3D Switch", WM8988_3D, 0, 1, 0),
SOC_SINGLE("3D Volume", WM8988_3D, 1, 15, 0),
SOC_ENUM("3D Lower Cut-off", stereo_3d_lc),
SOC_ENUM("3D Upper Cut-off", stereo_3d_uc),
SOC_ENUM("3D Mode", stereo_3d_func),
SOC_SINGLE("ALC Capture Target Volume", WM8988_ALC1, 0, 7, 0),
SOC_SINGLE("ALC Capture Max Volume", WM8988_ALC1, 4, 7, 0),
SOC_ENUM("ALC Capture Function", alc_func),
SOC_SINGLE("ALC Capture ZC Switch", WM8988_ALC2, 7, 1, 0),
SOC_SINGLE("ALC Capture Hold Time", WM8988_ALC2, 0, 15, 0),
SOC_SINGLE("ALC Capture Decay Time", WM8988_ALC3, 4, 15, 0),
SOC_SINGLE("ALC Capture Attack Time", WM8988_ALC3, 0, 15, 0),
SOC_SINGLE("ALC Capture NG Threshold", WM8988_NGATE, 3, 31, 0),
SOC_ENUM("ALC Capture NG Type", ng_type),
SOC_SINGLE("ALC Capture NG Switch", WM8988_NGATE, 0, 1, 0),
SOC_SINGLE("ZC Timeout Switch", WM8988_ADCTL1, 0, 1, 0),
SOC_DOUBLE_R_TLV("Capture Digital Volume", WM8988_LADC, WM8988_RADC,
0, 255, 0, adc_tlv),
SOC_DOUBLE_R_TLV("Capture Volume", WM8988_LINVOL, WM8988_RINVOL,
0, 63, 0, pga_tlv),
SOC_DOUBLE_R("Capture ZC Switch", WM8988_LINVOL, WM8988_RINVOL, 6, 1, 0),
SOC_DOUBLE_R("Capture Switch", WM8988_LINVOL, WM8988_RINVOL, 7, 1, 1),
SOC_ENUM("Playback De-emphasis", deemph),
SOC_ENUM("Capture Polarity", adcpol),
SOC_SINGLE("Playback 6dB Attenuate", WM8988_ADCDAC, 7, 1, 0),
SOC_SINGLE("Capture 6dB Attenuate", WM8988_ADCDAC, 8, 1, 0),
SOC_DOUBLE_R_TLV("PCM Volume", WM8988_LDAC, WM8988_RDAC, 0, 255, 0, dac_tlv),
SOC_SINGLE_TLV("Left Mixer Left Bypass Volume", WM8988_LOUTM1, 4, 7, 1,
bypass_tlv),
SOC_SINGLE_TLV("Left Mixer Right Bypass Volume", WM8988_LOUTM2, 4, 7, 1,
bypass_tlv),
SOC_SINGLE_TLV("Right Mixer Left Bypass Volume", WM8988_ROUTM1, 4, 7, 1,
bypass_tlv),
SOC_SINGLE_TLV("Right Mixer Right Bypass Volume", WM8988_ROUTM2, 4, 7, 1,
bypass_tlv),
SOC_DOUBLE_R("Output 1 Playback ZC Switch", WM8988_LOUT1V,
WM8988_ROUT1V, 7, 1, 0),
SOC_DOUBLE_R_TLV("Output 1 Playback Volume", WM8988_LOUT1V, WM8988_ROUT1V,
0, 127, 0, out_tlv),
SOC_DOUBLE_R("Output 2 Playback ZC Switch", WM8988_LOUT2V,
WM8988_ROUT2V, 7, 1, 0),
SOC_DOUBLE_R_TLV("Output 2 Playback Volume", WM8988_LOUT2V, WM8988_ROUT2V,
0, 127, 0, out_tlv),
};
/*
* DAPM Controls
*/
static int wm8988_lrc_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
u16 adctl2 = snd_soc_read(codec, WM8988_ADCTL2);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
/* Use the DAC to gate LRC if active, otherwise use ADC */
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
if (snd_soc_read(codec, WM8988_PWR2) & 0x180)
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
adctl2 &= ~0x4;
else
adctl2 |= 0x4;
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
return snd_soc_write(codec, WM8988_ADCTL2, adctl2);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
}
static const char *wm8988_line_texts[] = {
"Line 1", "Line 2", "PGA", "Differential"};
static const unsigned int wm8988_line_values[] = {
0, 1, 3, 4};
static const struct soc_enum wm8988_lline_enum =
SOC_VALUE_ENUM_SINGLE(WM8988_LOUTM1, 0, 7,
ARRAY_SIZE(wm8988_line_texts),
wm8988_line_texts,
wm8988_line_values);
static const struct snd_kcontrol_new wm8988_left_line_controls =
SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
static const struct soc_enum wm8988_rline_enum =
SOC_VALUE_ENUM_SINGLE(WM8988_ROUTM1, 0, 7,
ARRAY_SIZE(wm8988_line_texts),
wm8988_line_texts,
wm8988_line_values);
static const struct snd_kcontrol_new wm8988_right_line_controls =
SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
/* Left Mixer */
static const struct snd_kcontrol_new wm8988_left_mixer_controls[] = {
SOC_DAPM_SINGLE("Playback Switch", WM8988_LOUTM1, 8, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_LOUTM1, 7, 1, 0),
SOC_DAPM_SINGLE("Right Playback Switch", WM8988_LOUTM2, 8, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_LOUTM2, 7, 1, 0),
};
/* Right Mixer */
static const struct snd_kcontrol_new wm8988_right_mixer_controls[] = {
SOC_DAPM_SINGLE("Left Playback Switch", WM8988_ROUTM1, 8, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_ROUTM1, 7, 1, 0),
SOC_DAPM_SINGLE("Playback Switch", WM8988_ROUTM2, 8, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_ROUTM2, 7, 1, 0),
};
static const char *wm8988_pga_sel[] = {"Line 1", "Line 2", "Differential"};
static const unsigned int wm8988_pga_val[] = { 0, 1, 3 };
/* Left PGA Mux */
static const struct soc_enum wm8988_lpga_enum =
SOC_VALUE_ENUM_SINGLE(WM8988_LADCIN, 6, 3,
ARRAY_SIZE(wm8988_pga_sel),
wm8988_pga_sel,
wm8988_pga_val);
static const struct snd_kcontrol_new wm8988_left_pga_controls =
SOC_DAPM_VALUE_ENUM("Route", wm8988_lpga_enum);
/* Right PGA Mux */
static const struct soc_enum wm8988_rpga_enum =
SOC_VALUE_ENUM_SINGLE(WM8988_RADCIN, 6, 3,
ARRAY_SIZE(wm8988_pga_sel),
wm8988_pga_sel,
wm8988_pga_val);
static const struct snd_kcontrol_new wm8988_right_pga_controls =
SOC_DAPM_VALUE_ENUM("Route", wm8988_rpga_enum);
/* Differential Mux */
static const char *wm8988_diff_sel[] = {"Line 1", "Line 2"};
static const struct soc_enum diffmux =
SOC_ENUM_SINGLE(WM8988_ADCIN, 8, 2, wm8988_diff_sel);
static const struct snd_kcontrol_new wm8988_diffmux_controls =
SOC_DAPM_ENUM("Route", diffmux);
/* Mono ADC Mux */
static const char *wm8988_mono_mux[] = {"Stereo", "Mono (Left)",
"Mono (Right)", "Digital Mono"};
static const struct soc_enum monomux =
SOC_ENUM_SINGLE(WM8988_ADCIN, 6, 4, wm8988_mono_mux);
static const struct snd_kcontrol_new wm8988_monomux_controls =
SOC_DAPM_ENUM("Route", monomux);
static const struct snd_soc_dapm_widget wm8988_dapm_widgets[] = {
SND_SOC_DAPM_MICBIAS("Mic Bias", WM8988_PWR1, 1, 0),
SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
&wm8988_diffmux_controls),
SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
&wm8988_monomux_controls),
SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
&wm8988_monomux_controls),
SND_SOC_DAPM_MUX("Left PGA Mux", WM8988_PWR1, 5, 0,
&wm8988_left_pga_controls),
SND_SOC_DAPM_MUX("Right PGA Mux", WM8988_PWR1, 4, 0,
&wm8988_right_pga_controls),
SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
&wm8988_left_line_controls),
SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
&wm8988_right_line_controls),
SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8988_PWR1, 2, 0),
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8988_PWR1, 3, 0),
SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8988_PWR2, 7, 0),
SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8988_PWR2, 8, 0),
SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
&wm8988_left_mixer_controls[0],
ARRAY_SIZE(wm8988_left_mixer_controls)),
SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
&wm8988_right_mixer_controls[0],
ARRAY_SIZE(wm8988_right_mixer_controls)),
SND_SOC_DAPM_PGA("Right Out 2", WM8988_PWR2, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Out 2", WM8988_PWR2, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Out 1", WM8988_PWR2, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Out 1", WM8988_PWR2, 6, 0, NULL, 0),
SND_SOC_DAPM_POST("LRC control", wm8988_lrc_control),
SND_SOC_DAPM_OUTPUT("LOUT1"),
SND_SOC_DAPM_OUTPUT("ROUT1"),
SND_SOC_DAPM_OUTPUT("LOUT2"),
SND_SOC_DAPM_OUTPUT("ROUT2"),
SND_SOC_DAPM_OUTPUT("VREF"),
SND_SOC_DAPM_INPUT("LINPUT1"),
SND_SOC_DAPM_INPUT("LINPUT2"),
SND_SOC_DAPM_INPUT("RINPUT1"),
SND_SOC_DAPM_INPUT("RINPUT2"),
};
static const struct snd_soc_dapm_route audio_map[] = {
{ "Left Line Mux", "Line 1", "LINPUT1" },
{ "Left Line Mux", "Line 2", "LINPUT2" },
{ "Left Line Mux", "PGA", "Left PGA Mux" },
{ "Left Line Mux", "Differential", "Differential Mux" },
{ "Right Line Mux", "Line 1", "RINPUT1" },
{ "Right Line Mux", "Line 2", "RINPUT2" },
{ "Right Line Mux", "PGA", "Right PGA Mux" },
{ "Right Line Mux", "Differential", "Differential Mux" },
{ "Left PGA Mux", "Line 1", "LINPUT1" },
{ "Left PGA Mux", "Line 2", "LINPUT2" },
{ "Left PGA Mux", "Differential", "Differential Mux" },
{ "Right PGA Mux", "Line 1", "RINPUT1" },
{ "Right PGA Mux", "Line 2", "RINPUT2" },
{ "Right PGA Mux", "Differential", "Differential Mux" },
{ "Differential Mux", "Line 1", "LINPUT1" },
{ "Differential Mux", "Line 1", "RINPUT1" },
{ "Differential Mux", "Line 2", "LINPUT2" },
{ "Differential Mux", "Line 2", "RINPUT2" },
{ "Left ADC Mux", "Stereo", "Left PGA Mux" },
{ "Left ADC Mux", "Mono (Left)", "Left PGA Mux" },
{ "Left ADC Mux", "Digital Mono", "Left PGA Mux" },
{ "Right ADC Mux", "Stereo", "Right PGA Mux" },
{ "Right ADC Mux", "Mono (Right)", "Right PGA Mux" },
{ "Right ADC Mux", "Digital Mono", "Right PGA Mux" },
{ "Left ADC", NULL, "Left ADC Mux" },
{ "Right ADC", NULL, "Right ADC Mux" },
{ "Left Line Mux", "Line 1", "LINPUT1" },
{ "Left Line Mux", "Line 2", "LINPUT2" },
{ "Left Line Mux", "PGA", "Left PGA Mux" },
{ "Left Line Mux", "Differential", "Differential Mux" },
{ "Right Line Mux", "Line 1", "RINPUT1" },
{ "Right Line Mux", "Line 2", "RINPUT2" },
{ "Right Line Mux", "PGA", "Right PGA Mux" },
{ "Right Line Mux", "Differential", "Differential Mux" },
{ "Left Mixer", "Playback Switch", "Left DAC" },
{ "Left Mixer", "Left Bypass Switch", "Left Line Mux" },
{ "Left Mixer", "Right Playback Switch", "Right DAC" },
{ "Left Mixer", "Right Bypass Switch", "Right Line Mux" },
{ "Right Mixer", "Left Playback Switch", "Left DAC" },
{ "Right Mixer", "Left Bypass Switch", "Left Line Mux" },
{ "Right Mixer", "Playback Switch", "Right DAC" },
{ "Right Mixer", "Right Bypass Switch", "Right Line Mux" },
{ "Left Out 1", NULL, "Left Mixer" },
{ "LOUT1", NULL, "Left Out 1" },
{ "Right Out 1", NULL, "Right Mixer" },
{ "ROUT1", NULL, "Right Out 1" },
{ "Left Out 2", NULL, "Left Mixer" },
{ "LOUT2", NULL, "Left Out 2" },
{ "Right Out 2", NULL, "Right Mixer" },
{ "ROUT2", NULL, "Right Out 2" },
};
struct _coeff_div {
u32 mclk;
u32 rate;
u16 fs;
u8 sr:5;
u8 usb:1;
};
/* codec hifi mclk clock divider coefficients */
static const struct _coeff_div coeff_div[] = {
/* 8k */
{12288000, 8000, 1536, 0x6, 0x0},
{11289600, 8000, 1408, 0x16, 0x0},
{18432000, 8000, 2304, 0x7, 0x0},
{16934400, 8000, 2112, 0x17, 0x0},
{12000000, 8000, 1500, 0x6, 0x1},
/* 11.025k */
{11289600, 11025, 1024, 0x18, 0x0},
{16934400, 11025, 1536, 0x19, 0x0},
{12000000, 11025, 1088, 0x19, 0x1},
/* 16k */
{12288000, 16000, 768, 0xa, 0x0},
{18432000, 16000, 1152, 0xb, 0x0},
{12000000, 16000, 750, 0xa, 0x1},
/* 22.05k */
{11289600, 22050, 512, 0x1a, 0x0},
{16934400, 22050, 768, 0x1b, 0x0},
{12000000, 22050, 544, 0x1b, 0x1},
/* 32k */
{12288000, 32000, 384, 0xc, 0x0},
{18432000, 32000, 576, 0xd, 0x0},
{12000000, 32000, 375, 0xa, 0x1},
/* 44.1k */
{11289600, 44100, 256, 0x10, 0x0},
{16934400, 44100, 384, 0x11, 0x0},
{12000000, 44100, 272, 0x11, 0x1},
/* 48k */
{12288000, 48000, 256, 0x0, 0x0},
{18432000, 48000, 384, 0x1, 0x0},
{12000000, 48000, 250, 0x0, 0x1},
/* 88.2k */
{11289600, 88200, 128, 0x1e, 0x0},
{16934400, 88200, 192, 0x1f, 0x0},
{12000000, 88200, 136, 0x1f, 0x1},
/* 96k */
{12288000, 96000, 128, 0xe, 0x0},
{18432000, 96000, 192, 0xf, 0x0},
{12000000, 96000, 125, 0xe, 0x1},
};
static inline int get_coeff(int mclk, int rate)
{
int i;
for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
return i;
}
return -EINVAL;
}
/* The set of rates we can generate from the above for each SYSCLK */
static unsigned int rates_12288[] = {
8000, 12000, 16000, 24000, 24000, 32000, 48000, 96000,
};
static struct snd_pcm_hw_constraint_list constraints_12288 = {
.count = ARRAY_SIZE(rates_12288),
.list = rates_12288,
};
static unsigned int rates_112896[] = {
8000, 11025, 22050, 44100,
};
static struct snd_pcm_hw_constraint_list constraints_112896 = {
.count = ARRAY_SIZE(rates_112896),
.list = rates_112896,
};
static unsigned int rates_12[] = {
8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000,
48000, 88235, 96000,
};
static struct snd_pcm_hw_constraint_list constraints_12 = {
.count = ARRAY_SIZE(rates_12),
.list = rates_12,
};
/*
* Note that this should be called from init rather than from hw_params.
*/
static int wm8988_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 14:35:19 +08:00
struct wm8988_priv *wm8988 = snd_soc_codec_get_drvdata(codec);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
switch (freq) {
case 11289600:
case 18432000:
case 22579200:
case 36864000:
wm8988->sysclk_constraints = &constraints_112896;
wm8988->sysclk = freq;
return 0;
case 12288000:
case 16934400:
case 24576000:
case 33868800:
wm8988->sysclk_constraints = &constraints_12288;
wm8988->sysclk = freq;
return 0;
case 12000000:
case 24000000:
wm8988->sysclk_constraints = &constraints_12;
wm8988->sysclk = freq;
return 0;
}
return -EINVAL;
}
static int wm8988_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 iface = 0;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
iface = 0x0040;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
iface |= 0x0002;
break;
case SND_SOC_DAIFMT_RIGHT_J:
break;
case SND_SOC_DAIFMT_LEFT_J:
iface |= 0x0001;
break;
case SND_SOC_DAIFMT_DSP_A:
iface |= 0x0003;
break;
case SND_SOC_DAIFMT_DSP_B:
iface |= 0x0013;
break;
default:
return -EINVAL;
}
/* clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
iface |= 0x0090;
break;
case SND_SOC_DAIFMT_IB_NF:
iface |= 0x0080;
break;
case SND_SOC_DAIFMT_NB_IF:
iface |= 0x0010;
break;
default:
return -EINVAL;
}
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_IFACE, iface);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
return 0;
}
static int wm8988_pcm_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 14:35:19 +08:00
struct wm8988_priv *wm8988 = snd_soc_codec_get_drvdata(codec);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
/* The set of sample rates that can be supported depends on the
* MCLK supplied to the CODEC - enforce this.
*/
if (!wm8988->sysclk) {
dev_err(codec->dev,
"No MCLK configured, call set_sysclk() on init\n");
return -EINVAL;
}
snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
wm8988->sysclk_constraints);
return 0;
}
static int wm8988_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 14:35:19 +08:00
struct wm8988_priv *wm8988 = snd_soc_codec_get_drvdata(codec);
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
u16 iface = snd_soc_read(codec, WM8988_IFACE) & 0x1f3;
u16 srate = snd_soc_read(codec, WM8988_SRATE) & 0x180;
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
int coeff;
coeff = get_coeff(wm8988->sysclk, params_rate(params));
if (coeff < 0) {
coeff = get_coeff(wm8988->sysclk / 2, params_rate(params));
srate |= 0x40;
}
if (coeff < 0) {
dev_err(codec->dev,
"Unable to configure sample rate %dHz with %dHz MCLK\n",
params_rate(params), wm8988->sysclk);
return coeff;
}
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
iface |= 0x0004;
break;
case SNDRV_PCM_FORMAT_S24_LE:
iface |= 0x0008;
break;
case SNDRV_PCM_FORMAT_S32_LE:
iface |= 0x000c;
break;
}
/* set iface & srate */
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_IFACE, iface);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
if (coeff >= 0)
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_SRATE, srate |
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
}
static int wm8988_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
u16 mute_reg = snd_soc_read(codec, WM8988_ADCDAC) & 0xfff7;
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
if (mute)
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
else
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_ADCDAC, mute_reg);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
return 0;
}
static int wm8988_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
u16 pwr_reg = snd_soc_read(codec, WM8988_PWR1) & ~0x1c1;
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VREF, VMID=2x50k, digital enabled */
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* VREF, VMID=2x5k */
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
/* Charge caps */
msleep(100);
}
/* VREF, VMID=2*500k, digital stopped */
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
break;
case SND_SOC_BIAS_OFF:
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
snd_soc_write(codec, WM8988_PWR1, 0x0000);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
break;
}
codec->bias_level = level;
return 0;
}
#define WM8988_RATES SNDRV_PCM_RATE_8000_96000
#define WM8988_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE)
static struct snd_soc_dai_ops wm8988_ops = {
.startup = wm8988_pcm_startup,
.hw_params = wm8988_pcm_hw_params,
.set_fmt = wm8988_set_dai_fmt,
.set_sysclk = wm8988_set_dai_sysclk,
.digital_mute = wm8988_mute,
};
struct snd_soc_dai wm8988_dai = {
.name = "WM8988",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
.rates = WM8988_RATES,
.formats = WM8988_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = WM8988_RATES,
.formats = WM8988_FORMATS,
},
.ops = &wm8988_ops,
.symmetric_rates = 1,
};
EXPORT_SYMBOL_GPL(wm8988_dai);
static int wm8988_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
wm8988_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
static int wm8988_resume(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
int i;
u8 data[2];
u16 *cache = codec->reg_cache;
/* Sync reg_cache with the hardware */
for (i = 0; i < WM8988_NUM_REG; i++) {
if (i == WM8988_RESET)
continue;
data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
data[1] = cache[i] & 0x00ff;
codec->hw_write(codec->control_data, data, 2);
}
wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
}
static struct snd_soc_codec *wm8988_codec;
static int wm8988_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec;
int ret = 0;
if (wm8988_codec == NULL) {
dev_err(&pdev->dev, "Codec device not registered\n");
return -ENODEV;
}
socdev->card->codec = wm8988_codec;
codec = wm8988_codec;
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
dev_err(codec->dev, "failed to create pcms: %d\n", ret);
goto pcm_err;
}
snd_soc_add_controls(codec, wm8988_snd_controls,
ARRAY_SIZE(wm8988_snd_controls));
snd_soc_dapm_new_controls(codec, wm8988_dapm_widgets,
ARRAY_SIZE(wm8988_dapm_widgets));
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
return ret;
pcm_err:
return ret;
}
static int wm8988_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
return 0;
}
struct snd_soc_codec_device soc_codec_dev_wm8988 = {
.probe = wm8988_probe,
.remove = wm8988_remove,
.suspend = wm8988_suspend,
.resume = wm8988_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988);
ASoC: Add I/O control bus information to factored out cache setup While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-11 05:24:27 +08:00
static int wm8988_register(struct wm8988_priv *wm8988,
enum snd_soc_control_type control)
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
{
struct snd_soc_codec *codec = &wm8988->codec;
int ret;
u16 reg;
if (wm8988_codec) {
dev_err(codec->dev, "Another WM8988 is registered\n");
ret = -EINVAL;
goto err;
}
mutex_init(&codec->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 14:35:19 +08:00
snd_soc_codec_set_drvdata(codec, wm8988);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
codec->name = "WM8988";
codec->owner = THIS_MODULE;
codec->dai = &wm8988_dai;
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache);
codec->reg_cache = &wm8988->reg_cache;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8988_set_bias_level;
memcpy(codec->reg_cache, wm8988_reg,
sizeof(wm8988_reg));
ASoC: Add I/O control bus information to factored out cache setup While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-11 05:24:27 +08:00
ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
goto err;
}
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
ret = wm8988_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
ASoC: Fix leaks in WM8988 registration error handling Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 23:29:39 +08:00
goto err;
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
}
/* set the update bits (we always update left then right) */
ASoC: Begin to factor out register cache I/O functions A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-06 00:24:50 +08:00
reg = snd_soc_read(codec, WM8988_RADC);
snd_soc_write(codec, WM8988_RADC, reg | 0x100);
reg = snd_soc_read(codec, WM8988_RDAC);
snd_soc_write(codec, WM8988_RDAC, reg | 0x0100);
reg = snd_soc_read(codec, WM8988_ROUT1V);
snd_soc_write(codec, WM8988_ROUT1V, reg | 0x0100);
reg = snd_soc_read(codec, WM8988_ROUT2V);
snd_soc_write(codec, WM8988_ROUT2V, reg | 0x0100);
reg = snd_soc_read(codec, WM8988_RINVOL);
snd_soc_write(codec, WM8988_RINVOL, reg | 0x0100);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY);
wm8988_dai.dev = codec->dev;
wm8988_codec = codec;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
ASoC: Fix leaks in WM8988 registration error handling Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 23:29:39 +08:00
goto err;
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
}
ret = snd_soc_register_dai(&wm8988_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
ASoC: Fix leaks in WM8988 registration error handling Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 23:29:39 +08:00
goto err_codec;
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
}
return 0;
ASoC: Fix leaks in WM8988 registration error handling Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 23:29:39 +08:00
err_codec:
snd_soc_unregister_codec(codec);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
err:
kfree(wm8988);
return ret;
}
static void wm8988_unregister(struct wm8988_priv *wm8988)
{
wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_OFF);
snd_soc_unregister_dai(&wm8988_dai);
snd_soc_unregister_codec(&wm8988->codec);
kfree(wm8988);
wm8988_codec = NULL;
}
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static int wm8988_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8988_priv *wm8988;
struct snd_soc_codec *codec;
wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
if (wm8988 == NULL)
return -ENOMEM;
codec = &wm8988->codec;
i2c_set_clientdata(i2c, wm8988);
codec->control_data = i2c;
codec->dev = &i2c->dev;
ASoC: Add I/O control bus information to factored out cache setup While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-11 05:24:27 +08:00
return wm8988_register(wm8988, SND_SOC_I2C);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
}
static int wm8988_i2c_remove(struct i2c_client *client)
{
struct wm8988_priv *wm8988 = i2c_get_clientdata(client);
wm8988_unregister(wm8988);
return 0;
}
static const struct i2c_device_id wm8988_i2c_id[] = {
{ "wm8988", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8988_i2c_id);
static struct i2c_driver wm8988_i2c_driver = {
.driver = {
.name = "WM8988",
.owner = THIS_MODULE,
},
.probe = wm8988_i2c_probe,
.remove = wm8988_i2c_remove,
.id_table = wm8988_i2c_id,
};
#endif
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8988_spi_probe(struct spi_device *spi)
{
struct wm8988_priv *wm8988;
struct snd_soc_codec *codec;
wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
if (wm8988 == NULL)
return -ENOMEM;
codec = &wm8988->codec;
codec->control_data = spi;
codec->dev = &spi->dev;
Sound: remove direct access of driver_data This is the last in-kernel direct usage of driver_data, replace it with the proper dev_get/set_drvdata() calls. Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-23 06:46:03 +08:00
dev_set_drvdata(&spi->dev, wm8988);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
ASoC: Add I/O control bus information to factored out cache setup While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-11 05:24:27 +08:00
return wm8988_register(wm8988, SND_SOC_SPI);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
}
static int __devexit wm8988_spi_remove(struct spi_device *spi)
{
Sound: remove direct access of driver_data This is the last in-kernel direct usage of driver_data, replace it with the proper dev_get/set_drvdata() calls. Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-23 06:46:03 +08:00
struct wm8988_priv *wm8988 = dev_get_drvdata(&spi->dev);
ASoC: Add WM8988 CODEC driver The WM8988 is a low power, high quality stereo CODEC designed for portable digital audio applications. The device integrates complete interfaces to 2 stereo headphone or line out ports. External component requirements are drastically reduced as no separate headphone amplifiers are required. Advanced on-chip digital signal processing performs graphic equaliser, 3-D sound enhancement and automatic level control for the microphone or line input. The WM8988 can operate as a master or a slave, with various master clock frequencies including 12 or 24MHz for USB devices, or standard 256fs rates like 12.288MHz and 24.576MHz. Different audio sample rates such as 96kHz, 48kHz, 44.1kHz are generated directly from the master clock without the need for an external PLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-08 01:45:21 +08:00
wm8988_unregister(wm8988);
return 0;
}
static struct spi_driver wm8988_spi_driver = {
.driver = {
.name = "wm8988",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8988_spi_probe,
.remove = __devexit_p(wm8988_spi_remove),
};
#endif
static int __init wm8988_modinit(void)
{
int ret;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&wm8988_i2c_driver);
if (ret != 0)
pr_err("WM8988: Unable to register I2C driver: %d\n", ret);
#endif
#if defined(CONFIG_SPI_MASTER)
ret = spi_register_driver(&wm8988_spi_driver);
if (ret != 0)
pr_err("WM8988: Unable to register SPI driver: %d\n", ret);
#endif
return ret;
}
module_init(wm8988_modinit);
static void __exit wm8988_exit(void)
{
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8988_i2c_driver);
#endif
#if defined(CONFIG_SPI_MASTER)
spi_unregister_driver(&wm8988_spi_driver);
#endif
}
module_exit(wm8988_exit);
MODULE_DESCRIPTION("ASoC WM8988 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
Copy Permalink