renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
Code
e5b954e8d1
linux-next/arch/x86/crypto/crc32c-pcl-intel-asm_64.S

465 lines
13 KiB
ArmAsm
Raw Normal View History

crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
/*
* Implement fast CRC32C with PCLMULQDQ instructions. (x86_64)
*
crypto: crc32c - Update the links to the white papers on CRC32C calculations with PCLMULQDQ instructions. Herbert, The following patch update the stale link to the CRC32C white paper that was referenced. Tim Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-02-22 03:04:22 +08:00
* The white papers on CRC32C calculations with PCLMULQDQ instruction can be
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
* downloaded from:
crypto: crc32c - Update the links to the white papers on CRC32C calculations with PCLMULQDQ instructions. Herbert, The following patch update the stale link to the CRC32C white paper that was referenced. Tim Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-02-22 03:04:22 +08:00
* http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/crc-iscsi-polynomial-crc32-instruction-paper.pdf
* http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-paper.pdf
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
*
* Copyright (C) 2012 Intel Corporation.
*
* Authors:
* Wajdi Feghali <wajdi.k.feghali@intel.com>
* James Guilford <james.guilford@intel.com>
* David Cote <david.m.cote@intel.com>
* Tim Chen <tim.c.chen@linux.intel.com>
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
crypto: crc32-pclmul - Use gas macro for pclmulqdq Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y. Older versions of bintuils do not support the pclmulqdq instruction. The PCLMULQDQ gas macro is used instead. Signed-off-by: Sandy Wu <sandyw@twitter.com> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-29 08:05:44 +08:00
#include <asm/inst.h>
crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-19 19:39:21 +08:00
#include <linux/linkage.h>
x86/retpoline/crypto: Convert crypto assembler indirect jumps Convert all indirect jumps in crypto assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-6-git-send-email-dwmw@amazon.co.uk
2018-01-12 05:46:27 +08:00
#include <asm/nospec-branch.h>
crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-19 19:39:21 +08:00
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
## ISCSI CRC 32 Implementation with crc32 and pclmulqdq Instruction
.macro LABEL prefix n
\prefix\n\():
.endm
.macro JMPTBL_ENTRY i
.word crc_\i - crc_array
.endm
.macro JNC_LESS_THAN j
jnc less_than_\j
.endm
# Define threshold where buffers are considered "small" and routed to more
# efficient "by-1" code. This "by-1" code only handles up to 255 bytes, so
# SMALL_SIZE can be no larger than 255.
#define SMALL_SIZE 200
.if (SMALL_SIZE > 255)
.error "SMALL_ SIZE must be < 256"
.endif
# unsigned int crc_pcl(u8 *buffer, int len, unsigned int crc_init);
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
.text
crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-19 19:39:21 +08:00
ENTRY(crc_pcl)
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
#define bufp %rdi
#define bufp_dw %edi
#define bufp_w %di
#define bufp_b %dil
#define bufptmp %rcx
#define block_0 %rcx
#define block_1 %rdx
#define block_2 %r11
#define len %rsi
#define len_dw %esi
#define len_w %si
#define len_b %sil
#define crc_init_arg %rdx
#define tmp %rbx
#define crc_init %r8
#define crc_init_dw %r8d
#define crc1 %r9
#define crc2 %r10
pushq %rbx
pushq %rdi
pushq %rsi
## Move crc_init for Linux to a different
mov crc_init_arg, crc_init
################################################################
## 1) ALIGN:
################################################################
mov bufp, bufptmp # rdi = *buf
neg bufp
and $7, bufp # calculate the unalignment amount of
# the address
je proc_block # Skip if aligned
## If len is less than 8 and we're unaligned, we need to jump
## to special code to avoid reading beyond the end of the buffer
cmp $8, len
jae do_align
# less_than_8 expects length in upper 3 bits of len_dw
# less_than_8_post_shl1 expects length = carryflag * 8 + len_dw[31:30]
shl $32-3+1, len_dw
jmp less_than_8_post_shl1
do_align:
#### Calculate CRC of unaligned bytes of the buffer (if any)
movq (bufptmp), tmp # load a quadward from the buffer
add bufp, bufptmp # align buffer pointer for quadword
# processing
sub bufp, len # update buffer length
align_loop:
crc32b %bl, crc_init_dw # compute crc32 of 1-byte
shr $8, tmp # get next byte
dec bufp
jne align_loop
proc_block:
################################################################
## 2) PROCESS BLOCKS:
################################################################
## compute num of bytes to be processed
movq len, tmp # save num bytes in tmp
cmpq $128*24, len
jae full_block
continue_block:
cmpq $SMALL_SIZE, len
jb small
## len < 128*24
movq $2731, %rax # 2731 = ceil(2^16 / 24)
mul len_dw
shrq $16, %rax
## eax contains floor(bytes / 24) = num 24-byte chunks to do
## process rax 24-byte chunks (128 >= rax >= 0)
## compute end address of each block
## block 0 (base addr + RAX * 8)
## block 1 (base addr + RAX * 16)
## block 2 (base addr + RAX * 24)
lea (bufptmp, %rax, 8), block_0
lea (block_0, %rax, 8), block_1
lea (block_1, %rax, 8), block_2
xor crc1, crc1
xor crc2, crc2
## branch into array
lea jump_table(%rip), bufp
movzxw (bufp, %rax, 2), len
x86/asm/crypto: Move jump_table to .rodata section stacktool reports the following warning: stacktool: arch/x86/crypto/crc32c-pcl-intel-asm_64.o: crc_pcl()+0x11dd: can't decode instruction It gets confused when trying to decode jump_table data. Move jump_table to the .rodata section which is a more appropriate home for read-only data. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: David S. Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/1dbf80c097bb9d89c0cbddc01a815ada690e3b32.1453405861.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-22 06:49:16 +08:00
lea crc_array(%rip), bufp
lea (bufp, len, 1), bufp
x86/retpoline/crypto: Convert crypto assembler indirect jumps Convert all indirect jumps in crypto assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-6-git-send-email-dwmw@amazon.co.uk
2018-01-12 05:46:27 +08:00
JMP_NOSPEC bufp
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
################################################################
## 2a) PROCESS FULL BLOCKS:
################################################################
full_block:
x86/asm: Replace "MOVQ $imm, %reg" with MOVL There is no reason to use MOVQ to load a non-negative immediate constant value into a 64-bit register. MOVL does the same, since the upper 32 bits are zero-extended by the CPU. This makes the code a bit smaller, while leaving functionality unchanged. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427821211-25099-8-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 01:00:10 +08:00
movl $128,%eax
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
lea 128*8*2(block_0), block_1
lea 128*8*3(block_0), block_2
add $128*8*1, block_0
xor crc1,crc1
xor crc2,crc2
# Fall thruogh into top of crc array (crc_128)
################################################################
## 3) CRC Array:
################################################################
crc_array:
i=128
.rept 128-1
.altmacro
LABEL crc_ %i
.noaltmacro
crc32q -i*8(block_0), crc_init
crc32q -i*8(block_1), crc1
crc32q -i*8(block_2), crc2
i=(i-1)
.endr
.altmacro
LABEL crc_ %i
.noaltmacro
crc32q -i*8(block_0), crc_init
crc32q -i*8(block_1), crc1
# SKIP crc32 -i*8(block_2), crc2 ; Don't do this one yet
mov block_2, block_0
################################################################
## 4) Combine three results:
################################################################
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
lea (K_table-8)(%rip), bufp # first entry is for idx 1
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
shlq $3, %rax # rax *= 8
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
pmovzxdq (bufp,%rax), %xmm0 # 2 consts: K1:K2
leal (%eax,%eax,2), %eax # rax *= 3 (total *24)
subq %rax, tmp # tmp -= rax*24
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
movq crc_init, %xmm1 # CRC for block 1
crypto: crc32-pclmul - Use gas macro for pclmulqdq Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y. Older versions of bintuils do not support the pclmulqdq instruction. The PCLMULQDQ gas macro is used instead. Signed-off-by: Sandy Wu <sandyw@twitter.com> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-29 08:05:44 +08:00
PCLMULQDQ 0x00,%xmm0,%xmm1 # Multiply by K2
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
movq crc1, %xmm2 # CRC for block 2
crypto: crc32-pclmul - Use gas macro for pclmulqdq Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y. Older versions of bintuils do not support the pclmulqdq instruction. The PCLMULQDQ gas macro is used instead. Signed-off-by: Sandy Wu <sandyw@twitter.com> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-29 08:05:44 +08:00
PCLMULQDQ 0x10, %xmm0, %xmm2 # Multiply by K1
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
pxor %xmm2,%xmm1
movq %xmm1, %rax
xor -i*8(block_2), %rax
mov crc2, crc_init
crc32 %rax, crc_init
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
################################################################
## 5) Check for end:
################################################################
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
LABEL crc_ 0
mov tmp, len
cmp $128*24, tmp
jae full_block
cmp $24, tmp
jae continue_block
less_than_24:
shl $32-4, len_dw # less_than_16 expects length
# in upper 4 bits of len_dw
jnc less_than_16
crc32q (bufptmp), crc_init
crc32q 8(bufptmp), crc_init
jz do_return
add $16, bufptmp
# len is less than 8 if we got here
# less_than_8 expects length in upper 3 bits of len_dw
# less_than_8_post_shl1 expects length = carryflag * 8 + len_dw[31:30]
shl $2, len_dw
jmp less_than_8_post_shl1
#######################################################################
## 6) LESS THAN 256-bytes REMAIN AT THIS POINT (8-bits of len are full)
#######################################################################
small:
shl $32-8, len_dw # Prepare len_dw for less_than_256
j=256
.rept 5 # j = {256, 128, 64, 32, 16}
.altmacro
LABEL less_than_ %j # less_than_j: Length should be in
# upper lg(j) bits of len_dw
j=(j/2)
shl $1, len_dw # Get next MSB
JNC_LESS_THAN %j
.noaltmacro
i=0
.rept (j/8)
crc32q i(bufptmp), crc_init # Compute crc32 of 8-byte data
i=i+8
.endr
jz do_return # Return if remaining length is zero
add $j, bufptmp # Advance buf
.endr
less_than_8: # Length should be stored in
# upper 3 bits of len_dw
shl $1, len_dw
less_than_8_post_shl1:
jnc less_than_4
crc32l (bufptmp), crc_init_dw # CRC of 4 bytes
jz do_return # return if remaining data is zero
add $4, bufptmp
less_than_4: # Length should be stored in
# upper 2 bits of len_dw
shl $1, len_dw
jnc less_than_2
crc32w (bufptmp), crc_init_dw # CRC of 2 bytes
jz do_return # return if remaining data is zero
add $2, bufptmp
less_than_2: # Length should be stored in the MSB
# of len_dw
shl $1, len_dw
jnc less_than_1
crc32b (bufptmp), crc_init_dw # CRC of 1 byte
less_than_1: # Length should be zero
do_return:
movq crc_init, %rax
popq %rsi
popq %rdi
popq %rbx
ret
x86/asm/crypto: Move jump_table to .rodata section stacktool reports the following warning: stacktool: arch/x86/crypto/crc32c-pcl-intel-asm_64.o: crc_pcl()+0x11dd: can't decode instruction It gets confused when trying to decode jump_table data. Move jump_table to the .rodata section which is a more appropriate home for read-only data. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: David S. Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/1dbf80c097bb9d89c0cbddc01a815ada690e3b32.1453405861.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-22 06:49:16 +08:00
ENDPROC(crc_pcl)
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
crypto: x86/crc32c - fix %progbits -> @progbits %progbits form is used on ARM (where @ is a comment char). x86 consistently uses @progbits everywhere else. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Josh Poimboeuf <jpoimboe@redhat.com> CC: Xiaodong Liu <xiaodong.liu@intel.com> CC: Megha Dey <megha.dey@intel.com> CC: George Spelvin <linux@horizon.com> CC: linux-crypto@vger.kernel.org CC: x86@kernel.org CC: linux-kernel@vger.kernel.org Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-20 05:28:05 +08:00
.section .rodata, "a", @progbits
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
################################################################
## jump table Table is 129 entries x 2 bytes each
################################################################
.align 4
jump_table:
i=0
.rept 129
.altmacro
JMPTBL_ENTRY %i
.noaltmacro
i=i+1
.endr
crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-19 19:39:21 +08:00
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
################################################################
## PCLMULQDQ tables
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
## Table is 128 entries x 2 words (8 bytes) each
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
################################################################
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
.align 8
crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdf Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-28 06:44:22 +08:00
K_table:
crypto: crc32c-pclmul - Shrink K_table to 32-bit words There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-07 11:08:58 +08:00
.long 0x493c7d27, 0x00000001
.long 0xba4fc28e, 0x493c7d27
.long 0xddc0152b, 0xf20c0dfe
.long 0x9e4addf8, 0xba4fc28e
.long 0x39d3b296, 0x3da6d0cb
.long 0x0715ce53, 0xddc0152b
.long 0x47db8317, 0x1c291d04
.long 0x0d3b6092, 0x9e4addf8
.long 0xc96cfdc0, 0x740eef02
.long 0x878a92a7, 0x39d3b296
.long 0xdaece73e, 0x083a6eec
.long 0xab7aff2a, 0x0715ce53
.long 0x2162d385, 0xc49f4f67
.long 0x83348832, 0x47db8317
.long 0x299847d5, 0x2ad91c30
.long 0xb9e02b86, 0x0d3b6092
.long 0x18b33a4e, 0x6992cea2
.long 0xb6dd949b, 0xc96cfdc0
.long 0x78d9ccb7, 0x7e908048
.long 0xbac2fd7b, 0x878a92a7
.long 0xa60ce07b, 0x1b3d8f29
.long 0xce7f39f4, 0xdaece73e
.long 0x61d82e56, 0xf1d0f55e
.long 0xd270f1a2, 0xab7aff2a
.long 0xc619809d, 0xa87ab8a8
.long 0x2b3cac5d, 0x2162d385
.long 0x65863b64, 0x8462d800
.long 0x1b03397f, 0x83348832
.long 0xebb883bd, 0x71d111a8
.long 0xb3e32c28, 0x299847d5
.long 0x064f7f26, 0xffd852c6
.long 0xdd7e3b0c, 0xb9e02b86
.long 0xf285651c, 0xdcb17aa4
.long 0x10746f3c, 0x18b33a4e
.long 0xc7a68855, 0xf37c5aee
.long 0x271d9844, 0xb6dd949b
.long 0x8e766a0c, 0x6051d5a2
.long 0x93a5f730, 0x78d9ccb7
.long 0x6cb08e5c, 0x18b0d4ff
.long 0x6b749fb2, 0xbac2fd7b
.long 0x1393e203, 0x21f3d99c
.long 0xcec3662e, 0xa60ce07b
.long 0x96c515bb, 0x8f158014
.long 0xe6fc4e6a, 0xce7f39f4
.long 0x8227bb8a, 0xa00457f7
.long 0xb0cd4768, 0x61d82e56
.long 0x39c7ff35, 0x8d6d2c43
.long 0xd7a4825c, 0xd270f1a2
.long 0x0ab3844b, 0x00ac29cf
.long 0x0167d312, 0xc619809d
.long 0xf6076544, 0xe9adf796
.long 0x26f6a60a, 0x2b3cac5d
.long 0xa741c1bf, 0x96638b34
.long 0x98d8d9cb, 0x65863b64
.long 0x49c3cc9c, 0xe0e9f351
.long 0x68bce87a, 0x1b03397f
.long 0x57a3d037, 0x9af01f2d
.long 0x6956fc3b, 0xebb883bd
.long 0x42d98888, 0x2cff42cf
.long 0x3771e98f, 0xb3e32c28
.long 0xb42ae3d9, 0x88f25a3a
.long 0x2178513a, 0x064f7f26
.long 0xe0ac139e, 0x4e36f0b0
.long 0x170076fa, 0xdd7e3b0c
.long 0x444dd413, 0xbd6f81f8
.long 0x6f345e45, 0xf285651c
.long 0x41d17b64, 0x91c9bd4b
.long 0xff0dba97, 0x10746f3c
.long 0xa2b73df1, 0x885f087b
.long 0xf872e54c, 0xc7a68855
.long 0x1e41e9fc, 0x4c144932
.long 0x86d8e4d2, 0x271d9844
.long 0x651bd98b, 0x52148f02
.long 0x5bb8f1bc, 0x8e766a0c
.long 0xa90fd27a, 0xa3c6f37a
.long 0xb3af077a, 0x93a5f730
.long 0x4984d782, 0xd7c0557f
.long 0xca6ef3ac, 0x6cb08e5c
.long 0x234e0b26, 0x63ded06a
.long 0xdd66cbbb, 0x6b749fb2
.long 0x4597456a, 0x4d56973c
.long 0xe9e28eb4, 0x1393e203
.long 0x7b3ff57a, 0x9669c9df
.long 0xc9c8b782, 0xcec3662e
.long 0x3f70cc6f, 0xe417f38a
.long 0x93e106a4, 0x96c515bb
.long 0x62ec6c6d, 0x4b9e0f71
.long 0xd813b325, 0xe6fc4e6a
.long 0x0df04680, 0xd104b8fc
.long 0x2342001e, 0x8227bb8a
.long 0x0a2a8d7e, 0x5b397730
.long 0x6d9a4957, 0xb0cd4768
.long 0xe8b6368b, 0xe78eb416
.long 0xd2c3ed1a, 0x39c7ff35
.long 0x995a5724, 0x61ff0e01
.long 0x9ef68d35, 0xd7a4825c
.long 0x0c139b31, 0x8d96551c
.long 0xf2271e60, 0x0ab3844b
.long 0x0b0bf8ca, 0x0bf80dd2
.long 0x2664fd8b, 0x0167d312
.long 0xed64812d, 0x8821abed
.long 0x02ee03b2, 0xf6076544
.long 0x8604ae0f, 0x6a45d2b2
.long 0x363bd6b3, 0x26f6a60a
.long 0x135c83fd, 0xd8d26619
.long 0x5fabe670, 0xa741c1bf
.long 0x35ec3279, 0xde87806c
.long 0x00bcf5f6, 0x98d8d9cb
.long 0x8ae00689, 0x14338754
.long 0x17f27698, 0x49c3cc9c
.long 0x58ca5f00, 0x5bd2011f
.long 0xaa7c7ad5, 0x68bce87a
.long 0xb5cfca28, 0xdd07448e
.long 0xded288f8, 0x57a3d037
.long 0x59f229bc, 0xdde8f5b9
.long 0x6d390dec, 0x6956fc3b
.long 0x37170390, 0xa3e3e02c
.long 0x6353c1cc, 0x42d98888
.long 0xc4584f5c, 0xd73c7bea
.long 0xf48642e9, 0x3771e98f
.long 0x531377e2, 0x80ff0093
.long 0xdd35bc8d, 0xb42ae3d9
.long 0xb25b29f2, 0x8fe4c34d
.long 0x9a5ede41, 0x2178513a
.long 0xa563905d, 0xdf99fc11
.long 0x45cddf4e, 0xe0ac139e
.long 0xacfa3103, 0x6c23e841
.long 0xa51b6135, 0x170076fa
Copy Permalink