renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
Code
e3e00445d4
linux-next/drivers/hwmon/adt7x10.h

38 lines
932 B
C
Raw Normal View History

hwmon: (adt7410) Add support for the adt7310/adt7320 The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map layout is a bit different, i.e. the register addresses differ between the two variants, but the bit layouts of the individual registers are identical. So both chip variants can easily be supported by the same driver. The issue of non matching register address layouts is solved by a simple look-up table which translates the I2C addresses to the SPI addresses. The patch moves the bulk of the adt7410 driver to a common module that will be shared by the adt7410 and adt7310 drivers. This common module implements the driver logic and uses a set of virtual functions to perform IO access. The adt7410 and adt7310 driver modules provide proper implementations of these IO accessor functions for I2C respective SPI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-12 18:38:46 +08:00
#ifndef __HWMON_ADT7X10_H__
#define __HWMON_ADT7X10_H__
#include <linux/types.h>
#include <linux/pm.h>
/* ADT7410 registers definition */
#define ADT7X10_TEMPERATURE 0
#define ADT7X10_STATUS 2
#define ADT7X10_CONFIG 3
#define ADT7X10_T_ALARM_HIGH 4
#define ADT7X10_T_ALARM_LOW 6
#define ADT7X10_T_CRIT 8
#define ADT7X10_T_HYST 0xA
#define ADT7X10_ID 0xB
struct device;
struct adt7x10_ops {
int (*read_byte)(struct device *, u8 reg);
int (*write_byte)(struct device *, u8 reg, u8 data);
int (*read_word)(struct device *, u8 reg);
int (*write_word)(struct device *, u8 reg, u16 data);
};
hwmon: (adt7x10) Add alarm interrupt support This allows an userspace application to poll() on the alarm files to get notified in case of a temperature threshold event. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-12 18:38:47 +08:00
int adt7x10_probe(struct device *dev, const char *name, int irq,
hwmon: (adt7410) Add support for the adt7310/adt7320 The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map layout is a bit different, i.e. the register addresses differ between the two variants, but the bit layouts of the individual registers are identical. So both chip variants can easily be supported by the same driver. The issue of non matching register address layouts is solved by a simple look-up table which translates the I2C addresses to the SPI addresses. The patch moves the bulk of the adt7410 driver to a common module that will be shared by the adt7410 and adt7310 drivers. This common module implements the driver logic and uses a set of virtual functions to perform IO access. The adt7410 and adt7310 driver modules provide proper implementations of these IO accessor functions for I2C respective SPI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-12 18:38:46 +08:00
const struct adt7x10_ops *ops);
hwmon: (adt7x10) Add alarm interrupt support This allows an userspace application to poll() on the alarm files to get notified in case of a temperature threshold event. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-12 18:38:47 +08:00
int adt7x10_remove(struct device *dev, int irq);
hwmon: (adt7410) Add support for the adt7310/adt7320 The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map layout is a bit different, i.e. the register addresses differ between the two variants, but the bit layouts of the individual registers are identical. So both chip variants can easily be supported by the same driver. The issue of non matching register address layouts is solved by a simple look-up table which translates the I2C addresses to the SPI addresses. The patch moves the bulk of the adt7410 driver to a common module that will be shared by the adt7410 and adt7310 drivers. This common module implements the driver logic and uses a set of virtual functions to perform IO access. The adt7410 and adt7310 driver modules provide proper implementations of these IO accessor functions for I2C respective SPI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-12 18:38:46 +08:00
#ifdef CONFIG_PM_SLEEP
extern const struct dev_pm_ops adt7x10_dev_pm_ops;
#define ADT7X10_DEV_PM_OPS (&adt7x10_dev_pm_ops)
#else
#define ADT7X10_DEV_PM_OPS NULL
#endif
#endif
Copy Permalink