renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
d665840867
linux-next/arch/powerpc/platforms/embedded6xx/Kconfig

71 lines
1.6 KiB
Plaintext
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
choice
prompt "Machine Type"
depends on EMBEDDED6xx
[POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-02 05:53:48 +08:00
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
[POWERPC] PowerPC: select default image for Linkstation Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-23 06:52:02 +08:00
select DEFAULT_UIMAGE
[POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-02 05:53:48 +08:00
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
KuroboxHG has been tested. In the future classical Kurobox,
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
Terastation systems should be supported too.
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 15:07:15 +08:00
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 05:28:38 +08:00
config PPC_HOLLY
bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
select TSI108_BRIDGE
select PPC_UDBG_16550
[POWERPC] Update holly to use new dts wrapping feature The holly support currently has separate rules to wrap its device tree with its zImage. This can now be done automatically without the extra rules so update holly support to use the automatic feature. Signed-off-by: Mark A. Greer <mgreer@mista.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-01 03:56:15 +08:00
select WANT_DEVICE_TREE
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 05:28:38 +08:00
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
[POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 This finally adds the PPC_PRPMC2800 Kconfig option, the board setup code (the setup and reset functions) and the defconfig, to support the Motorola PrPMC2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 08:58:43 +08:00
config PPC_PRPMC2800
bool "Motorola-PrPMC2800"
select MV64X60
select NOT_COHERENT_CACHE
select WANT_DEVICE_TREE
help
This option enables support for the Motorola PrPMC2800 board
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
endchoice
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 15:07:15 +08:00
config TSI108_BRIDGE
bool
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 05:28:38 +08:00
depends on MPC7448HPC2 || PPC_HOLLY
select MPIC
select MPIC_WEIRD
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 15:07:15 +08:00
default y
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
config MPC10X_BRIDGE
bool
[POWERPC] Removed config options that we don't support in embedded6xx When we started arch/powerpc we duplicated a number of config options from arch/ppc for various platforms that are supported. Now that we actually support a few platforms, remove all the ones that haven't been moved over. Additionally, this cleanup moved the 82xx/PQ2 options over into arch/powerpc/platforms/82xx/Kconfig where they belong. It also killed GEN550 which doesn't exist in arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-16 21:46:55 +08:00
depends on LINKSTATION
ppc: Use the indirect_pci.c from arch/powerpc/sysdev This defines a CONFIG_INDIRECT_PCI symbol to control whether it gets used or not, and fixes the Kconfig to select that symbol for platforms that need it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 14:36:55 +08:00
select PPC_INDIRECT_PCI
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
default y
[POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data This patch creates platform_device entries for the Marvell mv64x60 MPSC (multi-protocol serial controller) ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 08:55:53 +08:00
config MV64X60
bool
[POWERPC] Add Marvell mv64x60 PCI bridge support This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 08:57:12 +08:00
select PPC_INDIRECT_PCI
[POWERPC] Check cache coherency of kernel vs firmware check_cache_coherency() verifies that the cache coherency setting of the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware, as indicated by coherency-off device tree property. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 08:57:35 +08:00
select CONFIG_CHECK_CACHE_COHERENCY
[POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data This patch creates platform_device entries for the Marvell mv64x60 MPSC (multi-protocol serial controller) ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 08:55:53 +08:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
config MPC10X_OPENPIC
bool
[POWERPC] Removed config options that we don't support in embedded6xx When we started arch/powerpc we duplicated a number of config options from arch/ppc for various platforms that are supported. Now that we actually support a few platforms, remove all the ones that haven't been moved over. Additionally, this cleanup moved the 82xx/PQ2 options over into arch/powerpc/platforms/82xx/Kconfig where they belong. It also killed GEN550 which doesn't exist in arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-16 21:46:55 +08:00
depends on LINKSTATION
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
Copy Permalink