2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/drivers/edac/i5100_edac.c

1092 lines
26 KiB
C
Raw Normal View History

edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/*
* Intel 5100 Memory Controllers kernel module
*
* This file may be distributed under the terms of the
* GNU General Public License.
*
* This module is based on the following document:
*
* Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
* http://download.intel.com/design/chipsets/datashts/318378.pdf
*
* The intel 5100 has two independent channels. EDAC core currently
* can not reflect this configuration so instead the chip-select
* rows for each respective channel are layed out one after another,
* the first half belonging to channel 0, the second half belonging
* to channel 1.
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/edac.h>
#include <linux/delay.h>
#include <linux/mmzone.h>
#include "edac_core.h"
/* register addresses */
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* device 16, func 1 */
#define I5100_MC 0x40 /* Memory Control Register */
#define I5100_MC_SCRBEN_MASK (1 << 7)
#define I5100_MC_SCRBDONE_MASK (1 << 4)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define I5100_MS 0x44 /* Memory Status Register */
#define I5100_SPDDATA 0x48 /* Serial Presence Detect Status Reg */
#define I5100_SPDCMD 0x4c /* Serial Presence Detect Command Reg */
#define I5100_TOLM 0x6c /* Top of Low Memory */
#define I5100_MIR0 0x80 /* Memory Interleave Range 0 */
#define I5100_MIR1 0x84 /* Memory Interleave Range 1 */
#define I5100_AMIR_0 0x8c /* Adjusted Memory Interleave Range 0 */
#define I5100_AMIR_1 0x90 /* Adjusted Memory Interleave Range 1 */
#define I5100_FERR_NF_MEM 0xa0 /* MC First Non Fatal Errors */
#define I5100_FERR_NF_MEM_M16ERR_MASK (1 << 16)
#define I5100_FERR_NF_MEM_M15ERR_MASK (1 << 15)
#define I5100_FERR_NF_MEM_M14ERR_MASK (1 << 14)
#define I5100_FERR_NF_MEM_M12ERR_MASK (1 << 12)
#define I5100_FERR_NF_MEM_M11ERR_MASK (1 << 11)
#define I5100_FERR_NF_MEM_M10ERR_MASK (1 << 10)
#define I5100_FERR_NF_MEM_M6ERR_MASK (1 << 6)
#define I5100_FERR_NF_MEM_M5ERR_MASK (1 << 5)
#define I5100_FERR_NF_MEM_M4ERR_MASK (1 << 4)
#define I5100_FERR_NF_MEM_M1ERR_MASK 1
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define I5100_FERR_NF_MEM_ANY_MASK \
(I5100_FERR_NF_MEM_M16ERR_MASK | \
I5100_FERR_NF_MEM_M15ERR_MASK | \
I5100_FERR_NF_MEM_M14ERR_MASK | \
I5100_FERR_NF_MEM_M12ERR_MASK | \
I5100_FERR_NF_MEM_M11ERR_MASK | \
I5100_FERR_NF_MEM_M10ERR_MASK | \
I5100_FERR_NF_MEM_M6ERR_MASK | \
I5100_FERR_NF_MEM_M5ERR_MASK | \
I5100_FERR_NF_MEM_M4ERR_MASK | \
I5100_FERR_NF_MEM_M1ERR_MASK)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define I5100_NERR_NF_MEM 0xa4 /* MC Next Non-Fatal Errors */
#define I5100_EMASK_MEM 0xa8 /* MC Error Mask Register */
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* device 21 and 22, func 0 */
#define I5100_MTR_0 0x154 /* Memory Technology Registers 0-3 */
#define I5100_DMIR 0x15c /* DIMM Interleave Range */
#define I5100_VALIDLOG 0x18c /* Valid Log Markers */
#define I5100_NRECMEMA 0x190 /* Non-Recoverable Memory Error Log Reg A */
#define I5100_NRECMEMB 0x194 /* Non-Recoverable Memory Error Log Reg B */
#define I5100_REDMEMA 0x198 /* Recoverable Memory Data Error Log Reg A */
#define I5100_REDMEMB 0x19c /* Recoverable Memory Data Error Log Reg B */
#define I5100_RECMEMA 0x1a0 /* Recoverable Memory Error Log Reg A */
#define I5100_RECMEMB 0x1a4 /* Recoverable Memory Error Log Reg B */
#define I5100_MTR_4 0x1b0 /* Memory Technology Registers 4,5 */
/* bit field accessors */
static inline u32 i5100_mc_scrben(u32 mc)
{
return mc >> 7 & 1;
}
static inline u32 i5100_mc_errdeten(u32 mc)
{
return mc >> 5 & 1;
}
static inline u32 i5100_mc_scrbdone(u32 mc)
{
return mc >> 4 & 1;
}
static inline u16 i5100_spddata_rdo(u16 a)
{
return a >> 15 & 1;
}
static inline u16 i5100_spddata_sbe(u16 a)
{
return a >> 13 & 1;
}
static inline u16 i5100_spddata_busy(u16 a)
{
return a >> 12 & 1;
}
static inline u16 i5100_spddata_data(u16 a)
{
return a & ((1 << 8) - 1);
}
static inline u32 i5100_spdcmd_create(u32 dti, u32 ckovrd, u32 sa, u32 ba,
u32 data, u32 cmd)
{
return ((dti & ((1 << 4) - 1)) << 28) |
((ckovrd & 1) << 27) |
((sa & ((1 << 3) - 1)) << 24) |
((ba & ((1 << 8) - 1)) << 16) |
((data & ((1 << 8) - 1)) << 8) |
(cmd & 1);
}
static inline u16 i5100_tolm_tolm(u16 a)
{
return a >> 12 & ((1 << 4) - 1);
}
static inline u16 i5100_mir_limit(u16 a)
{
return a >> 4 & ((1 << 12) - 1);
}
static inline u16 i5100_mir_way1(u16 a)
{
return a >> 1 & 1;
}
static inline u16 i5100_mir_way0(u16 a)
{
return a & 1;
}
static inline u32 i5100_ferr_nf_mem_chan_indx(u32 a)
{
return a >> 28 & 1;
}
static inline u32 i5100_ferr_nf_mem_any(u32 a)
{
return a & I5100_FERR_NF_MEM_ANY_MASK;
}
static inline u32 i5100_nerr_nf_mem_any(u32 a)
{
return i5100_ferr_nf_mem_any(a);
}
static inline u32 i5100_dmir_limit(u32 a)
{
return a >> 16 & ((1 << 11) - 1);
}
static inline u32 i5100_dmir_rank(u32 a, u32 i)
{
return a >> (4 * i) & ((1 << 2) - 1);
}
static inline u16 i5100_mtr_present(u16 a)
{
return a >> 10 & 1;
}
static inline u16 i5100_mtr_ethrottle(u16 a)
{
return a >> 9 & 1;
}
static inline u16 i5100_mtr_width(u16 a)
{
return a >> 8 & 1;
}
static inline u16 i5100_mtr_numbank(u16 a)
{
return a >> 6 & 1;
}
static inline u16 i5100_mtr_numrow(u16 a)
{
return a >> 2 & ((1 << 2) - 1);
}
static inline u16 i5100_mtr_numcol(u16 a)
{
return a & ((1 << 2) - 1);
}
static inline u32 i5100_validlog_redmemvalid(u32 a)
{
return a >> 2 & 1;
}
static inline u32 i5100_validlog_recmemvalid(u32 a)
{
return a >> 1 & 1;
}
static inline u32 i5100_validlog_nrecmemvalid(u32 a)
{
return a & 1;
}
static inline u32 i5100_nrecmema_merr(u32 a)
{
return a >> 15 & ((1 << 5) - 1);
}
static inline u32 i5100_nrecmema_bank(u32 a)
{
return a >> 12 & ((1 << 3) - 1);
}
static inline u32 i5100_nrecmema_rank(u32 a)
{
return a >> 8 & ((1 << 3) - 1);
}
static inline u32 i5100_nrecmema_dm_buf_id(u32 a)
{
return a & ((1 << 8) - 1);
}
static inline u32 i5100_nrecmemb_cas(u32 a)
{
return a >> 16 & ((1 << 13) - 1);
}
static inline u32 i5100_nrecmemb_ras(u32 a)
{
return a & ((1 << 16) - 1);
}
static inline u32 i5100_redmemb_ecc_locator(u32 a)
{
return a & ((1 << 18) - 1);
}
static inline u32 i5100_recmema_merr(u32 a)
{
return i5100_nrecmema_merr(a);
}
static inline u32 i5100_recmema_bank(u32 a)
{
return i5100_nrecmema_bank(a);
}
static inline u32 i5100_recmema_rank(u32 a)
{
return i5100_nrecmema_rank(a);
}
static inline u32 i5100_recmema_dm_buf_id(u32 a)
{
return i5100_nrecmema_dm_buf_id(a);
}
static inline u32 i5100_recmemb_cas(u32 a)
{
return i5100_nrecmemb_cas(a);
}
static inline u32 i5100_recmemb_ras(u32 a)
{
return i5100_nrecmemb_ras(a);
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* some generic limits */
#define I5100_MAX_RANKS_PER_CHAN 6
#define I5100_CHANNELS 2
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define I5100_MAX_RANKS_PER_DIMM 4
#define I5100_DIMM_ADDR_LINES (6 - 3) /* 64 bits / 8 bits per byte */
#define I5100_MAX_DIMM_SLOTS_PER_CHAN 4
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define I5100_MAX_RANK_INTERLEAVE 4
#define I5100_MAX_DMIRS 5
#define I5100_SCRUB_REFRESH_RATE (5 * 60 * HZ)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
struct i5100_priv {
/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
int dimm_numrank[I5100_CHANNELS][I5100_MAX_DIMM_SLOTS_PER_CHAN];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/*
* mainboard chip select map -- maps i5100 chip selects to
* DIMM slot chip selects. In the case of only 4 ranks per
* channel, the mapping is fairly obvious but not unique.
* we map -1 -> NC and assume both channels use the same
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
* map...
*
*/
int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CHAN][I5100_MAX_RANKS_PER_DIMM];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* memory interleave range */
struct {
u64 limit;
unsigned way[2];
} mir[I5100_CHANNELS];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* adjusted memory interleave range register */
unsigned amir[I5100_CHANNELS];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* dimm interleave range */
struct {
unsigned rank[I5100_MAX_RANK_INTERLEAVE];
u64 limit;
} dmir[I5100_CHANNELS][I5100_MAX_DMIRS];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* memory technology registers... */
struct {
unsigned present; /* 0 or 1 */
unsigned ethrottle; /* 0 or 1 */
unsigned width; /* 4 or 8 bits */
unsigned numbank; /* 2 or 3 lines */
unsigned numrow; /* 13 .. 16 lines */
unsigned numcol; /* 11 .. 12 lines */
} mtr[I5100_CHANNELS][I5100_MAX_RANKS_PER_CHAN];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
u64 tolm; /* top of low memory in bytes */
unsigned ranksperchan; /* number of ranks per channel */
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
struct pci_dev *mc; /* device 16 func 1 */
struct pci_dev *ch0mm; /* device 21 func 0 */
struct pci_dev *ch1mm; /* device 22 func 0 */
struct delayed_work i5100_scrubbing;
int scrub_enable;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
};
/* map a rank/chan to a slot number on the mainboard */
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
int chan, int rank)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
{
const struct i5100_priv *priv = mci->pvt_info;
int i;
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
int j;
const int numrank = priv->dimm_numrank[chan][i];
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
for (j = 0; j < numrank; j++)
if (priv->dimm_csmap[i][j] == rank)
return i * 2 + chan;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
return -1;
}
static const char *i5100_err_msg(unsigned err)
{
static const char *merrs[] = {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
"unknown", /* 0 */
"uncorrectable data ECC on replay", /* 1 */
"unknown", /* 2 */
"unknown", /* 3 */
"aliased uncorrectable demand data ECC", /* 4 */
"aliased uncorrectable spare-copy data ECC", /* 5 */
"aliased uncorrectable patrol data ECC", /* 6 */
"unknown", /* 7 */
"unknown", /* 8 */
"unknown", /* 9 */
"non-aliased uncorrectable demand data ECC", /* 10 */
"non-aliased uncorrectable spare-copy data ECC", /* 11 */
"non-aliased uncorrectable patrol data ECC", /* 12 */
"unknown", /* 13 */
"correctable demand data ECC", /* 14 */
"correctable spare-copy data ECC", /* 15 */
"correctable patrol data ECC", /* 16 */
"unknown", /* 17 */
"SPD protocol error", /* 18 */
"unknown", /* 19 */
"spare copy initiated", /* 20 */
"spare copy completed", /* 21 */
};
unsigned i;
for (i = 0; i < ARRAY_SIZE(merrs); i++)
if (1 << i & err)
return merrs[i];
return "none";
}
/* convert csrow index into a rank (per channel -- 0..5) */
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
{
const struct i5100_priv *priv = mci->pvt_info;
return csrow % priv->ranksperchan;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
/* convert csrow index into a channel (0..1) */
static int i5100_csrow_to_chan(const struct mem_ctl_info *mci, int csrow)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
{
const struct i5100_priv *priv = mci->pvt_info;
return csrow / priv->ranksperchan;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
static unsigned i5100_rank_to_csrow(const struct mem_ctl_info *mci,
int chan, int rank)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
{
const struct i5100_priv *priv = mci->pvt_info;
return chan * priv->ranksperchan + rank;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
static void i5100_handle_ce(struct mem_ctl_info *mci,
int chan,
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
unsigned bank,
unsigned rank,
unsigned long syndrome,
unsigned cas,
unsigned ras,
const char *msg)
{
const int csrow = i5100_rank_to_csrow(mci, chan, rank);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
printk(KERN_ERR
"CE chan %d, bank %u, rank %u, syndrome 0x%lx, "
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
chan, bank, rank, syndrome, cas, ras,
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
csrow, mci->csrows[csrow].channels[0].label, msg);
mci->ce_count++;
mci->csrows[csrow].ce_count++;
mci->csrows[csrow].channels[0].ce_count++;
}
static void i5100_handle_ue(struct mem_ctl_info *mci,
int chan,
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
unsigned bank,
unsigned rank,
unsigned long syndrome,
unsigned cas,
unsigned ras,
const char *msg)
{
const int csrow = i5100_rank_to_csrow(mci, chan, rank);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
printk(KERN_ERR
"UE chan %d, bank %u, rank %u, syndrome 0x%lx, "
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
chan, bank, rank, syndrome, cas, ras,
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
csrow, mci->csrows[csrow].channels[0].label, msg);
mci->ue_count++;
mci->csrows[csrow].ue_count++;
}
static void i5100_read_log(struct mem_ctl_info *mci, int chan,
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
u32 ferr, u32 nerr)
{
struct i5100_priv *priv = mci->pvt_info;
struct pci_dev *pdev = (chan) ? priv->ch1mm : priv->ch0mm;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
u32 dw;
u32 dw2;
unsigned syndrome = 0;
unsigned ecc_loc = 0;
unsigned merr;
unsigned bank;
unsigned rank;
unsigned cas;
unsigned ras;
pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
if (i5100_validlog_redmemvalid(dw)) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
syndrome = dw2;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
ecc_loc = i5100_redmemb_ecc_locator(dw2);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
if (i5100_validlog_recmemvalid(dw)) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
const char *msg;
pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
merr = i5100_recmema_merr(dw2);
bank = i5100_recmema_bank(dw2);
rank = i5100_recmema_rank(dw2);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
cas = i5100_recmemb_cas(dw2);
ras = i5100_recmemb_ras(dw2);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* FIXME: not really sure if this is what merr is...
*/
if (!merr)
msg = i5100_err_msg(ferr);
else
msg = i5100_err_msg(nerr);
i5100_handle_ce(mci, chan, bank, rank, syndrome, cas, ras, msg);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
if (i5100_validlog_nrecmemvalid(dw)) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
const char *msg;
pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
merr = i5100_nrecmema_merr(dw2);
bank = i5100_nrecmema_bank(dw2);
rank = i5100_nrecmema_rank(dw2);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
cas = i5100_nrecmemb_cas(dw2);
ras = i5100_nrecmemb_ras(dw2);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* FIXME: not really sure if this is what merr is...
*/
if (!merr)
msg = i5100_err_msg(ferr);
else
msg = i5100_err_msg(nerr);
i5100_handle_ue(mci, chan, bank, rank, syndrome, cas, ras, msg);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
}
static void i5100_check_error(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
u32 dw;
pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
if (i5100_ferr_nf_mem_any(dw)) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
u32 dw2;
pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
if (dw2)
pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM,
dw2);
pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw),
i5100_ferr_nf_mem_any(dw),
i5100_nerr_nf_mem_any(dw2));
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
}
/* The i5100 chipset will scrub the entire memory once, then
* set a done bit. Continuous scrubbing is achieved by enqueing
* delayed work to a workqueue, checking every few minutes if
* the scrubbing has completed and if so reinitiating it.
*/
static void i5100_refresh_scrubbing(struct work_struct *work)
{
struct delayed_work *i5100_scrubbing = container_of(work,
struct delayed_work,
work);
struct i5100_priv *priv = container_of(i5100_scrubbing,
struct i5100_priv,
i5100_scrubbing);
u32 dw;
pci_read_config_dword(priv->mc, I5100_MC, &dw);
if (priv->scrub_enable) {
pci_read_config_dword(priv->mc, I5100_MC, &dw);
if (i5100_mc_scrbdone(dw)) {
dw |= I5100_MC_SCRBEN_MASK;
pci_write_config_dword(priv->mc, I5100_MC, dw);
pci_read_config_dword(priv->mc, I5100_MC, &dw);
}
schedule_delayed_work(&(priv->i5100_scrubbing),
I5100_SCRUB_REFRESH_RATE);
}
}
/*
* The bandwidth is based on experimentation, feel free to refine it.
*/
static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
{
struct i5100_priv *priv = mci->pvt_info;
u32 dw;
pci_read_config_dword(priv->mc, I5100_MC, &dw);
if (bandwidth) {
priv->scrub_enable = 1;
dw |= I5100_MC_SCRBEN_MASK;
schedule_delayed_work(&(priv->i5100_scrubbing),
I5100_SCRUB_REFRESH_RATE);
} else {
priv->scrub_enable = 0;
dw &= ~I5100_MC_SCRBEN_MASK;
cancel_delayed_work(&(priv->i5100_scrubbing));
}
pci_write_config_dword(priv->mc, I5100_MC, dw);
pci_read_config_dword(priv->mc, I5100_MC, &dw);
bandwidth = 5900000 * i5100_mc_scrben(dw);
return 0;
}
static int i5100_get_scrub_rate(struct mem_ctl_info *mci,
u32 *bandwidth)
{
struct i5100_priv *priv = mci->pvt_info;
u32 dw;
pci_read_config_dword(priv->mc, I5100_MC, &dw);
*bandwidth = 5900000 * i5100_mc_scrben(dw);
return 0;
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
static struct pci_dev *pci_get_device_func(unsigned vendor,
unsigned device,
unsigned func)
{
struct pci_dev *ret = NULL;
while (1) {
ret = pci_get_device(vendor, device, ret);
if (!ret)
break;
if (PCI_FUNC(ret->devfn) == func)
break;
}
return ret;
}
static unsigned long __devinit i5100_npages(struct mem_ctl_info *mci,
int csrow)
{
struct i5100_priv *priv = mci->pvt_info;
const unsigned chan_rank = i5100_csrow_to_rank(mci, csrow);
const unsigned chan = i5100_csrow_to_chan(mci, csrow);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
unsigned addr_lines;
/* dimm present? */
if (!priv->mtr[chan][chan_rank].present)
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
return 0ULL;
addr_lines =
I5100_DIMM_ADDR_LINES +
priv->mtr[chan][chan_rank].numcol +
priv->mtr[chan][chan_rank].numrow +
priv->mtr[chan][chan_rank].numbank;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
return (unsigned long)
((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
}
static void __devinit i5100_init_mtr(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
int i;
for (i = 0; i < I5100_CHANNELS; i++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
int j;
struct pci_dev *pdev = mms[i];
for (j = 0; j < I5100_MAX_RANKS_PER_CHAN; j++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
const unsigned addr =
(j < 4) ? I5100_MTR_0 + j * 2 :
I5100_MTR_4 + (j - 4) * 2;
u16 w;
pci_read_config_word(pdev, addr, &w);
priv->mtr[i][j].present = i5100_mtr_present(w);
priv->mtr[i][j].ethrottle = i5100_mtr_ethrottle(w);
priv->mtr[i][j].width = 4 + 4 * i5100_mtr_width(w);
priv->mtr[i][j].numbank = 2 + i5100_mtr_numbank(w);
priv->mtr[i][j].numrow = 13 + i5100_mtr_numrow(w);
priv->mtr[i][j].numcol = 10 + i5100_mtr_numcol(w);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
}
}
/*
* FIXME: make this into a real i2c adapter (so that dimm-decode
* will work)?
*/
static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
u8 ch, u8 slot, u8 addr, u8 *byte)
{
struct i5100_priv *priv = mci->pvt_info;
u16 w;
unsigned long et;
pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
if (i5100_spddata_busy(w))
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
return -1;
pci_write_config_dword(priv->mc, I5100_SPDCMD,
i5100_spdcmd_create(0xa, 1, ch * 4 + slot, addr,
0, 0));
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* wait up to 100ms */
et = jiffies + HZ / 10;
udelay(100);
while (1) {
pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
if (!i5100_spddata_busy(w))
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
break;
udelay(100);
}
if (!i5100_spddata_rdo(w) || i5100_spddata_sbe(w))
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
return -1;
*byte = i5100_spddata_data(w);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
return 0;
}
/*
* fill dimm chip select map
*
* FIXME:
* o not the only way to may chip selects to dimm slots
* o investigate if there is some way to obtain this map from the bios
*/
static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
int i;
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
int j;
for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
priv->dimm_csmap[i][j] = -1; /* default NC */
}
/* only 2 chip selects per slot... */
if (priv->ranksperchan == 4) {
priv->dimm_csmap[0][0] = 0;
priv->dimm_csmap[0][1] = 3;
priv->dimm_csmap[1][0] = 1;
priv->dimm_csmap[1][1] = 2;
priv->dimm_csmap[2][0] = 2;
priv->dimm_csmap[3][0] = 3;
} else {
priv->dimm_csmap[0][0] = 0;
priv->dimm_csmap[0][1] = 1;
priv->dimm_csmap[1][0] = 2;
priv->dimm_csmap[1][1] = 3;
priv->dimm_csmap[2][0] = 4;
priv->dimm_csmap[2][1] = 5;
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
int i;
for (i = 0; i < I5100_CHANNELS; i++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
int j;
for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CHAN; j++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
u8 rank;
if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
priv->dimm_numrank[i][j] = 0;
else
priv->dimm_numrank[i][j] = (rank & 3) + 1;
}
}
i5100_init_dimm_csmap(mci);
}
static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
struct mem_ctl_info *mci)
{
u16 w;
u32 dw;
struct i5100_priv *priv = mci->pvt_info;
struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
int i;
pci_read_config_word(pdev, I5100_TOLM, &w);
priv->tolm = (u64) i5100_tolm_tolm(w) * 256 * 1024 * 1024;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_word(pdev, I5100_MIR0, &w);
priv->mir[0].limit = (u64) i5100_mir_limit(w) << 28;
priv->mir[0].way[1] = i5100_mir_way1(w);
priv->mir[0].way[0] = i5100_mir_way0(w);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_word(pdev, I5100_MIR1, &w);
priv->mir[1].limit = (u64) i5100_mir_limit(w) << 28;
priv->mir[1].way[1] = i5100_mir_way1(w);
priv->mir[1].way[0] = i5100_mir_way0(w);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_read_config_word(pdev, I5100_AMIR_0, &w);
priv->amir[0] = w;
pci_read_config_word(pdev, I5100_AMIR_1, &w);
priv->amir[1] = w;
for (i = 0; i < I5100_CHANNELS; i++) {
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
int j;
for (j = 0; j < 5; j++) {
int k;
pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
priv->dmir[i][j].limit =
(u64) i5100_dmir_limit(dw) << 28;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
priv->dmir[i][j].rank[k] =
i5100_dmir_rank(dw, k);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
}
i5100_init_mtr(mci);
}
static void __devinit i5100_init_csrows(struct mem_ctl_info *mci)
{
int i;
unsigned long total_pages = 0UL;
struct i5100_priv *priv = mci->pvt_info;
for (i = 0; i < mci->nr_csrows; i++) {
const unsigned long npages = i5100_npages(mci, i);
const unsigned chan = i5100_csrow_to_chan(mci, i);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
const unsigned rank = i5100_csrow_to_rank(mci, i);
if (!npages)
continue;
/*
* FIXME: these two are totally bogus -- I don't see how to
* map them correctly to this structure...
*/
mci->csrows[i].first_page = total_pages;
mci->csrows[i].last_page = total_pages + npages - 1;
mci->csrows[i].page_mask = 0UL;
mci->csrows[i].nr_pages = npages;
mci->csrows[i].grain = 32;
mci->csrows[i].csrow_idx = i;
mci->csrows[i].dtype =
(priv->mtr[chan][rank].width == 4) ? DEV_X4 : DEV_X8;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
mci->csrows[i].ue_count = 0;
mci->csrows[i].ce_count = 0;
mci->csrows[i].mtype = MEM_RDDR2;
mci->csrows[i].edac_mode = EDAC_SECDED;
mci->csrows[i].mci = mci;
mci->csrows[i].nr_channels = 1;
mci->csrows[i].channels[0].chan_idx = 0;
mci->csrows[i].channels[0].ce_count = 0;
mci->csrows[i].channels[0].csrow = mci->csrows + i;
snprintf(mci->csrows[i].channels[0].label,
sizeof(mci->csrows[i].channels[0].label),
"DIMM%u", i5100_rank_to_slot(mci, chan, rank));
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
total_pages += npages;
}
}
static int __devinit i5100_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int rc;
struct mem_ctl_info *mci;
struct i5100_priv *priv;
struct pci_dev *ch0mm, *ch1mm;
int ret = 0;
u32 dw;
int ranksperch;
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
rc = pci_enable_device(pdev);
if (rc < 0) {
ret = rc;
goto bail;
}
/* ECC enabled? */
pci_read_config_dword(pdev, I5100_MC, &dw);
if (!i5100_mc_errdeten(dw)) {
printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
ret = -ENODEV;
goto bail_pdev;
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* figure out how many ranks, from strapped state of 48GB_Mode input */
pci_read_config_dword(pdev, I5100_MS, &dw);
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
/* enable error reporting... */
pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_21, 0);
if (!ch0mm) {
ret = -ENODEV;
goto bail_pdev;
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
rc = pci_enable_device(ch0mm);
if (rc < 0) {
ret = rc;
goto bail_ch0;
}
/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_22, 0);
if (!ch1mm) {
ret = -ENODEV;
goto bail_disable_ch0;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
rc = pci_enable_device(ch1mm);
if (rc < 0) {
ret = rc;
goto bail_ch1;
}
mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
if (!mci) {
ret = -ENOMEM;
goto bail_disable_ch1;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
mci->dev = &pdev->dev;
priv = mci->pvt_info;
priv->ranksperchan = ranksperch;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
priv->mc = pdev;
priv->ch0mm = ch0mm;
priv->ch1mm = ch1mm;
INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);
/* If scrubbing was already enabled by the bios, start maintaining it */
pci_read_config_dword(pdev, I5100_MC, &dw);
if (i5100_mc_scrben(dw)) {
priv->scrub_enable = 1;
schedule_delayed_work(&(priv->i5100_scrubbing),
I5100_SCRUB_REFRESH_RATE);
}
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
i5100_init_dimm_layout(pdev, mci);
i5100_init_interleaving(pdev, mci);
mci->mtype_cap = MEM_FLAG_FB_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = "i5100_edac.c";
mci->mod_ver = "not versioned";
mci->ctl_name = "i5100";
mci->dev_name = pci_name(pdev);
mci->ctl_page_to_phys = NULL;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
mci->edac_check = i5100_check_error;
mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
i5100_init_csrows(mci);
/* this strange construction seems to be in every driver, dunno why */
switch (edac_op_state) {
case EDAC_OPSTATE_POLL:
case EDAC_OPSTATE_NMI:
break;
default:
edac_op_state = EDAC_OPSTATE_POLL;
break;
}
if (edac_mc_add_mc(mci)) {
ret = -ENODEV;
goto bail_scrub;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
}
return ret;
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
bail_scrub:
priv->scrub_enable = 0;
cancel_delayed_work_sync(&(priv->i5100_scrubbing));
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
edac_mc_free(mci);
bail_disable_ch1:
pci_disable_device(ch1mm);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
bail_ch1:
pci_dev_put(ch1mm);
bail_disable_ch0:
pci_disable_device(ch0mm);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
bail_ch0:
pci_dev_put(ch0mm);
bail_pdev:
pci_disable_device(pdev);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
bail:
return ret;
}
static void __devexit i5100_remove_one(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
struct i5100_priv *priv;
mci = edac_mc_del_mc(&pdev->dev);
if (!mci)
return;
priv = mci->pvt_info;
priv->scrub_enable = 0;
cancel_delayed_work_sync(&(priv->i5100_scrubbing));
pci_disable_device(pdev);
pci_disable_device(priv->ch0mm);
pci_disable_device(priv->ch1mm);
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
pci_dev_put(priv->ch0mm);
pci_dev_put(priv->ch1mm);
edac_mc_free(mci);
}
static const struct pci_device_id i5100_pci_tbl[] __devinitdata = {
/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
static struct pci_driver i5100_driver = {
.name = KBUILD_BASENAME,
.probe = i5100_init_one,
.remove = __devexit_p(i5100_remove_one),
.id_table = i5100_pci_tbl,
};
static int __init i5100_init(void)
{
int pci_rc;
pci_rc = pci_register_driver(&i5100_driver);
return (pci_rc < 0) ? pci_rc : 0;
}
static void __exit i5100_exit(void)
{
pci_unregister_driver(&i5100_driver);
}
module_init(i5100_init);
module_exit(i5100_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR
("Arthur Jones <ajones@riverbed.com>");
MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");