2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/arch/arm64/mm/hugetlbpage.c

485 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm64/mm/hugetlbpage.c
*
* Copyright (C) 2013 Linaro Ltd.
*
* Based on arch/x86/mm/hugetlbpage.c.
*/
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/pgalloc.h>
#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
bool arch_hugetlb_migration_supported(struct hstate *h)
{
size_t pagesize = huge_page_size(h);
switch (pagesize) {
#ifdef CONFIG_ARM64_4K_PAGES
case PUD_SIZE:
#endif
case PMD_SIZE:
case CONT_PMD_SIZE:
case CONT_PTE_SIZE:
return true;
}
pr_warn("%s: unrecognized huge page size 0x%lx\n",
__func__, pagesize);
return false;
}
#endif
int pmd_huge(pmd_t pmd)
{
return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
}
int pud_huge(pud_t pud)
{
arm64: fix pud_huge() for 2-level pagetables The following happens when trying to run a kvm guest on a kernel configured for 64k pages. This doesn't happen with 4k pages: BUG: failure at include/linux/mm.h:297/put_page_testzero()! Kernel panic - not syncing: BUG! CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF 3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1 Call trace: [<fffffe0000096034>] dump_backtrace+0x0/0x16c [<fffffe00000961b4>] show_stack+0x14/0x1c [<fffffe000066e648>] dump_stack+0x84/0xb0 [<fffffe0000668678>] panic+0xf4/0x220 [<fffffe000018ec78>] free_reserved_area+0x0/0x110 [<fffffe000018edd8>] free_pages+0x50/0x88 [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40 [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44 [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184 [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c [<fffffe00001edc1c>] __fput+0xb0/0x288 [<fffffe00001ede4c>] ____fput+0xc/0x14 [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c [<fffffe0000095c14>] do_notify_resume+0x54/0x58 In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page() on the stage2 pgd which leads to the BUG in put_page_testzero(). This happens because a pud_huge() test in unmap_range() returns true when it should always be false with 2-level pages tables used by 64k pages. This patch removes support for huge puds if 2-level pagetables are being used. Signed-off-by: Mark Salter <msalter@redhat.com> [catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # v3.11+
2014-05-15 22:19:22 +08:00
#ifndef __PAGETABLE_PMD_FOLDED
return pud_val(pud) && !(pud_val(pud) & PUD_TABLE_BIT);
arm64: fix pud_huge() for 2-level pagetables The following happens when trying to run a kvm guest on a kernel configured for 64k pages. This doesn't happen with 4k pages: BUG: failure at include/linux/mm.h:297/put_page_testzero()! Kernel panic - not syncing: BUG! CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF 3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1 Call trace: [<fffffe0000096034>] dump_backtrace+0x0/0x16c [<fffffe00000961b4>] show_stack+0x14/0x1c [<fffffe000066e648>] dump_stack+0x84/0xb0 [<fffffe0000668678>] panic+0xf4/0x220 [<fffffe000018ec78>] free_reserved_area+0x0/0x110 [<fffffe000018edd8>] free_pages+0x50/0x88 [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40 [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44 [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184 [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c [<fffffe00001edc1c>] __fput+0xb0/0x288 [<fffffe00001ede4c>] ____fput+0xc/0x14 [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c [<fffffe0000095c14>] do_notify_resume+0x54/0x58 In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page() on the stage2 pgd which leads to the BUG in put_page_testzero(). This happens because a pud_huge() test in unmap_range() returns true when it should always be false with 2-level pages tables used by 64k pages. This patch removes support for huge puds if 2-level pagetables are being used. Signed-off-by: Mark Salter <msalter@redhat.com> [catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # v3.11+
2014-05-15 22:19:22 +08:00
#else
return 0;
#endif
}
/*
* Select all bits except the pfn
*/
static inline pgprot_t pte_pgprot(pte_t pte)
{
unsigned long pfn = pte_pfn(pte);
return __pgprot(pte_val(pfn_pte(pfn, __pgprot(0))) ^ pte_val(pte));
}
static int find_num_contig(struct mm_struct *mm, unsigned long addr,
arm64: hugetlb: refactor find_num_contig() Patch series "Support for contiguous pte hugepages", v4. This patchset updates the hugetlb code to fix issues arising from contiguous pte hugepages (such as on arm64). Compared to v3, This version addresses a build failure on arm64 by including two cleanup patches. Other than the arm64 cleanups, the rest are generic code changes. The remaining arm64 support based on these patches will be posted separately. The patches are based on v4.12-rc2. Previous related postings can be found at [0], [1], [2], and [3]. The patches fall into three categories - * Patch 1-2 - arm64 cleanups required to greatly simplify changing huge_pte_offset() prototype in Patch 5. Catalin, Will - are you happy for these patches to go via mm? * Patches 3-4 address issues with gup * Patches 5-8 relate to passing a size argument to hugepage helpers to disambiguate the size of the referred page. These changes are required to enable arch code to properly handle swap entries for contiguous pte hugepages. The changes to huge_pte_offset() (patch 5) touch multiple architectures but I've managed to minimise these changes for the other affected functions - huge_pte_clear() and set_huge_pte_at(). These patches gate the enabling of contiguous hugepages support on arm64 which has been requested for systems using !4k page granule. The ARM64 architecture supports two flavours of hugepages - * Block mappings at the pud/pmd level These are regular hugepages where a pmd or a pud page table entry points to a block of memory. Depending on the PAGE_SIZE in use the following size of block mappings are supported - PMD PUD --- --- 4K: 2M 1G 16K: 32M 64K: 512M For certain applications/usecases such as HPC and large enterprise workloads, folks are using 64k page size but the minimum hugepage size of 512MB isn't very practical. To overcome this ... * Using the Contiguous bit The architecture provides a contiguous bit in the translation table entry which acts as a hint to the mmu to indicate that it is one of a contiguous set of entries that can be cached in a single TLB entry. We use the contiguous bit in Linux to increase the mapping size at the pmd and pte (last) level. The number of supported contiguous entries varies by page size and level of the page table. Using the contiguous bit allows additional hugepage sizes - CONT PTE PMD CONT PMD PUD -------- --- -------- --- 4K: 64K 2M 32M 1G 16K: 2M 32M 1G 64K: 2M 512M 16G Of these, 64K with 4K and 2M with 64K pages have been explicitly requested by a few different users. Entries with the contiguous bit set are required to be modified all together - which makes things like memory poisoning and migration impossible to do correctly without knowing the size of hugepage being dealt with - the reason for adding size parameter to a few of the hugepage helpers in this series. This patch (of 8): As we regularly check for contiguous pte's in the huge accessors, remove this extra check from find_num_contig. [punit.agrawal@arm.com: resolve rebase conflicts due to patch re-ordering] Link: http://lkml.kernel.org/r/20170524115409.31309-2-punit.agrawal@arm.com Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: David Woods <dwoods@mellanox.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:29 +08:00
pte_t *ptep, size_t *pgsize)
{
pgd_t *pgdp = pgd_offset(mm, addr);
pud_t *pudp;
pmd_t *pmdp;
*pgsize = PAGE_SIZE;
pudp = pud_offset(pgdp, addr);
pmdp = pmd_offset(pudp, addr);
if ((pte_t *)pmdp == ptep) {
*pgsize = PMD_SIZE;
return CONT_PMDS;
}
return CONT_PTES;
}
static inline int num_contig_ptes(unsigned long size, size_t *pgsize)
{
int contig_ptes = 0;
*pgsize = size;
switch (size) {
#ifdef CONFIG_ARM64_4K_PAGES
case PUD_SIZE:
#endif
case PMD_SIZE:
contig_ptes = 1;
break;
case CONT_PMD_SIZE:
*pgsize = PMD_SIZE;
contig_ptes = CONT_PMDS;
break;
case CONT_PTE_SIZE:
*pgsize = PAGE_SIZE;
contig_ptes = CONT_PTES;
break;
}
return contig_ptes;
}
/*
* Changing some bits of contiguous entries requires us to follow a
* Break-Before-Make approach, breaking the whole contiguous set
* before we can change any entries. See ARM DDI 0487A.k_iss10775,
* "Misprogramming of the Contiguous bit", page D4-1762.
*
* This helper performs the break step.
*/
static pte_t get_clear_flush(struct mm_struct *mm,
unsigned long addr,
pte_t *ptep,
unsigned long pgsize,
unsigned long ncontig)
{
pte_t orig_pte = huge_ptep_get(ptep);
bool valid = pte_valid(orig_pte);
unsigned long i, saddr = addr;
for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) {
pte_t pte = ptep_get_and_clear(mm, addr, ptep);
/*
* If HW_AFDBM is enabled, then the HW could turn on
* the dirty or accessed bit for any page in the set,
* so check them all.
*/
if (pte_dirty(pte))
orig_pte = pte_mkdirty(orig_pte);
if (pte_young(pte))
orig_pte = pte_mkyoung(orig_pte);
}
mm: do not initialize TLB stack vma's with vma_init() Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02 04:43:38 +08:00
if (valid) {
struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
flush_tlb_range(&vma, saddr, addr);
mm: do not initialize TLB stack vma's with vma_init() Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02 04:43:38 +08:00
}
return orig_pte;
}
/*
* Changing some bits of contiguous entries requires us to follow a
* Break-Before-Make approach, breaking the whole contiguous set
* before we can change any entries. See ARM DDI 0487A.k_iss10775,
* "Misprogramming of the Contiguous bit", page D4-1762.
*
* This helper performs the break step for use cases where the
* original pte is not needed.
*/
static void clear_flush(struct mm_struct *mm,
unsigned long addr,
pte_t *ptep,
unsigned long pgsize,
unsigned long ncontig)
{
mm: do not initialize TLB stack vma's with vma_init() Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02 04:43:38 +08:00
struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
unsigned long i, saddr = addr;
for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
pte_clear(mm, addr, ptep);
flush_tlb_range(&vma, saddr, addr);
}
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
size_t pgsize;
int i;
arm64: hugetlb: refactor find_num_contig() Patch series "Support for contiguous pte hugepages", v4. This patchset updates the hugetlb code to fix issues arising from contiguous pte hugepages (such as on arm64). Compared to v3, This version addresses a build failure on arm64 by including two cleanup patches. Other than the arm64 cleanups, the rest are generic code changes. The remaining arm64 support based on these patches will be posted separately. The patches are based on v4.12-rc2. Previous related postings can be found at [0], [1], [2], and [3]. The patches fall into three categories - * Patch 1-2 - arm64 cleanups required to greatly simplify changing huge_pte_offset() prototype in Patch 5. Catalin, Will - are you happy for these patches to go via mm? * Patches 3-4 address issues with gup * Patches 5-8 relate to passing a size argument to hugepage helpers to disambiguate the size of the referred page. These changes are required to enable arch code to properly handle swap entries for contiguous pte hugepages. The changes to huge_pte_offset() (patch 5) touch multiple architectures but I've managed to minimise these changes for the other affected functions - huge_pte_clear() and set_huge_pte_at(). These patches gate the enabling of contiguous hugepages support on arm64 which has been requested for systems using !4k page granule. The ARM64 architecture supports two flavours of hugepages - * Block mappings at the pud/pmd level These are regular hugepages where a pmd or a pud page table entry points to a block of memory. Depending on the PAGE_SIZE in use the following size of block mappings are supported - PMD PUD --- --- 4K: 2M 1G 16K: 32M 64K: 512M For certain applications/usecases such as HPC and large enterprise workloads, folks are using 64k page size but the minimum hugepage size of 512MB isn't very practical. To overcome this ... * Using the Contiguous bit The architecture provides a contiguous bit in the translation table entry which acts as a hint to the mmu to indicate that it is one of a contiguous set of entries that can be cached in a single TLB entry. We use the contiguous bit in Linux to increase the mapping size at the pmd and pte (last) level. The number of supported contiguous entries varies by page size and level of the page table. Using the contiguous bit allows additional hugepage sizes - CONT PTE PMD CONT PMD PUD -------- --- -------- --- 4K: 64K 2M 32M 1G 16K: 2M 32M 1G 64K: 2M 512M 16G Of these, 64K with 4K and 2M with 64K pages have been explicitly requested by a few different users. Entries with the contiguous bit set are required to be modified all together - which makes things like memory poisoning and migration impossible to do correctly without knowing the size of hugepage being dealt with - the reason for adding size parameter to a few of the hugepage helpers in this series. This patch (of 8): As we regularly check for contiguous pte's in the huge accessors, remove this extra check from find_num_contig. [punit.agrawal@arm.com: resolve rebase conflicts due to patch re-ordering] Link: http://lkml.kernel.org/r/20170524115409.31309-2-punit.agrawal@arm.com Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: David Woods <dwoods@mellanox.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:29 +08:00
int ncontig;
unsigned long pfn, dpfn;
pgprot_t hugeprot;
/*
* Code needs to be expanded to handle huge swap and migration
* entries. Needed for HUGETLB and MEMORY_FAILURE.
*/
WARN_ON(!pte_present(pte));
arm64: hugetlb: refactor find_num_contig() Patch series "Support for contiguous pte hugepages", v4. This patchset updates the hugetlb code to fix issues arising from contiguous pte hugepages (such as on arm64). Compared to v3, This version addresses a build failure on arm64 by including two cleanup patches. Other than the arm64 cleanups, the rest are generic code changes. The remaining arm64 support based on these patches will be posted separately. The patches are based on v4.12-rc2. Previous related postings can be found at [0], [1], [2], and [3]. The patches fall into three categories - * Patch 1-2 - arm64 cleanups required to greatly simplify changing huge_pte_offset() prototype in Patch 5. Catalin, Will - are you happy for these patches to go via mm? * Patches 3-4 address issues with gup * Patches 5-8 relate to passing a size argument to hugepage helpers to disambiguate the size of the referred page. These changes are required to enable arch code to properly handle swap entries for contiguous pte hugepages. The changes to huge_pte_offset() (patch 5) touch multiple architectures but I've managed to minimise these changes for the other affected functions - huge_pte_clear() and set_huge_pte_at(). These patches gate the enabling of contiguous hugepages support on arm64 which has been requested for systems using !4k page granule. The ARM64 architecture supports two flavours of hugepages - * Block mappings at the pud/pmd level These are regular hugepages where a pmd or a pud page table entry points to a block of memory. Depending on the PAGE_SIZE in use the following size of block mappings are supported - PMD PUD --- --- 4K: 2M 1G 16K: 32M 64K: 512M For certain applications/usecases such as HPC and large enterprise workloads, folks are using 64k page size but the minimum hugepage size of 512MB isn't very practical. To overcome this ... * Using the Contiguous bit The architecture provides a contiguous bit in the translation table entry which acts as a hint to the mmu to indicate that it is one of a contiguous set of entries that can be cached in a single TLB entry. We use the contiguous bit in Linux to increase the mapping size at the pmd and pte (last) level. The number of supported contiguous entries varies by page size and level of the page table. Using the contiguous bit allows additional hugepage sizes - CONT PTE PMD CONT PMD PUD -------- --- -------- --- 4K: 64K 2M 32M 1G 16K: 2M 32M 1G 64K: 2M 512M 16G Of these, 64K with 4K and 2M with 64K pages have been explicitly requested by a few different users. Entries with the contiguous bit set are required to be modified all together - which makes things like memory poisoning and migration impossible to do correctly without knowing the size of hugepage being dealt with - the reason for adding size parameter to a few of the hugepage helpers in this series. This patch (of 8): As we regularly check for contiguous pte's in the huge accessors, remove this extra check from find_num_contig. [punit.agrawal@arm.com: resolve rebase conflicts due to patch re-ordering] Link: http://lkml.kernel.org/r/20170524115409.31309-2-punit.agrawal@arm.com Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: David Woods <dwoods@mellanox.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:29 +08:00
if (!pte_cont(pte)) {
set_pte_at(mm, addr, ptep, pte);
return;
}
arm64: hugetlb: refactor find_num_contig() Patch series "Support for contiguous pte hugepages", v4. This patchset updates the hugetlb code to fix issues arising from contiguous pte hugepages (such as on arm64). Compared to v3, This version addresses a build failure on arm64 by including two cleanup patches. Other than the arm64 cleanups, the rest are generic code changes. The remaining arm64 support based on these patches will be posted separately. The patches are based on v4.12-rc2. Previous related postings can be found at [0], [1], [2], and [3]. The patches fall into three categories - * Patch 1-2 - arm64 cleanups required to greatly simplify changing huge_pte_offset() prototype in Patch 5. Catalin, Will - are you happy for these patches to go via mm? * Patches 3-4 address issues with gup * Patches 5-8 relate to passing a size argument to hugepage helpers to disambiguate the size of the referred page. These changes are required to enable arch code to properly handle swap entries for contiguous pte hugepages. The changes to huge_pte_offset() (patch 5) touch multiple architectures but I've managed to minimise these changes for the other affected functions - huge_pte_clear() and set_huge_pte_at(). These patches gate the enabling of contiguous hugepages support on arm64 which has been requested for systems using !4k page granule. The ARM64 architecture supports two flavours of hugepages - * Block mappings at the pud/pmd level These are regular hugepages where a pmd or a pud page table entry points to a block of memory. Depending on the PAGE_SIZE in use the following size of block mappings are supported - PMD PUD --- --- 4K: 2M 1G 16K: 32M 64K: 512M For certain applications/usecases such as HPC and large enterprise workloads, folks are using 64k page size but the minimum hugepage size of 512MB isn't very practical. To overcome this ... * Using the Contiguous bit The architecture provides a contiguous bit in the translation table entry which acts as a hint to the mmu to indicate that it is one of a contiguous set of entries that can be cached in a single TLB entry. We use the contiguous bit in Linux to increase the mapping size at the pmd and pte (last) level. The number of supported contiguous entries varies by page size and level of the page table. Using the contiguous bit allows additional hugepage sizes - CONT PTE PMD CONT PMD PUD -------- --- -------- --- 4K: 64K 2M 32M 1G 16K: 2M 32M 1G 64K: 2M 512M 16G Of these, 64K with 4K and 2M with 64K pages have been explicitly requested by a few different users. Entries with the contiguous bit set are required to be modified all together - which makes things like memory poisoning and migration impossible to do correctly without knowing the size of hugepage being dealt with - the reason for adding size parameter to a few of the hugepage helpers in this series. This patch (of 8): As we regularly check for contiguous pte's in the huge accessors, remove this extra check from find_num_contig. [punit.agrawal@arm.com: resolve rebase conflicts due to patch re-ordering] Link: http://lkml.kernel.org/r/20170524115409.31309-2-punit.agrawal@arm.com Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: David Woods <dwoods@mellanox.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:29 +08:00
ncontig = find_num_contig(mm, addr, ptep, &pgsize);
pfn = pte_pfn(pte);
dpfn = pgsize >> PAGE_SHIFT;
hugeprot = pte_pgprot(pte);
clear_flush(mm, addr, ptep, pgsize, ncontig);
for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
}
void set_huge_swap_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte, unsigned long sz)
{
int i, ncontig;
size_t pgsize;
ncontig = num_contig_ptes(sz, &pgsize);
for (i = 0; i < ncontig; i++, ptep++)
set_pte(ptep, pte);
}
pte_t *huge_pte_alloc(struct mm_struct *mm,
unsigned long addr, unsigned long sz)
{
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep = NULL;
pgdp = pgd_offset(mm, addr);
pudp = pud_alloc(mm, pgdp, addr);
if (!pudp)
return NULL;
if (sz == PUD_SIZE) {
ptep = (pte_t *)pudp;
} else if (sz == (CONT_PTE_SIZE)) {
pmdp = pmd_alloc(mm, pudp, addr);
WARN_ON(addr & (sz - 1));
/*
* Note that if this code were ever ported to the
* 32-bit arm platform then it will cause trouble in
* the case where CONFIG_HIGHPTE is set, since there
* will be no pte_unmap() to correspond with this
* pte_alloc_map().
*/
ptep = pte_alloc_map(mm, pmdp, addr);
} else if (sz == PMD_SIZE) {
if (IS_ENABLED(CONFIG_ARCH_WANT_HUGE_PMD_SHARE) &&
pud_none(READ_ONCE(*pudp)))
ptep = huge_pmd_share(mm, addr, pudp);
else
ptep = (pte_t *)pmd_alloc(mm, pudp, addr);
} else if (sz == (CONT_PMD_SIZE)) {
pmdp = pmd_alloc(mm, pudp, addr);
WARN_ON(addr & (sz - 1));
return (pte_t *)pmdp;
}
return ptep;
}
mm/hugetlb: add size parameter to huge_pte_offset() A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:42 +08:00
pte_t *huge_pte_offset(struct mm_struct *mm,
unsigned long addr, unsigned long sz)
{
pgd_t *pgdp;
pud_t *pudp, pud;
pmd_t *pmdp, pmd;
pgdp = pgd_offset(mm, addr);
if (!pgd_present(READ_ONCE(*pgdp)))
return NULL;
pudp = pud_offset(pgdp, addr);
pud = READ_ONCE(*pudp);
if (sz != PUD_SIZE && pud_none(pud))
return NULL;
/* hugepage or swap? */
if (pud_huge(pud) || !pud_present(pud))
return (pte_t *)pudp;
/* table; check the next level */
if (sz == CONT_PMD_SIZE)
addr &= CONT_PMD_MASK;
pmdp = pmd_offset(pudp, addr);
pmd = READ_ONCE(*pmdp);
if (!(sz == PMD_SIZE || sz == CONT_PMD_SIZE) &&
pmd_none(pmd))
return NULL;
if (pmd_huge(pmd) || !pmd_present(pmd))
return (pte_t *)pmdp;
if (sz == CONT_PTE_SIZE)
return pte_offset_kernel(pmdp, (addr & CONT_PTE_MASK));
return NULL;
}
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable)
{
size_t pagesize = huge_page_size(hstate_vma(vma));
if (pagesize == CONT_PTE_SIZE) {
entry = pte_mkcont(entry);
} else if (pagesize == CONT_PMD_SIZE) {
entry = pmd_pte(pmd_mkcont(pte_pmd(entry)));
} else if (pagesize != PUD_SIZE && pagesize != PMD_SIZE) {
pr_warn("%s: unrecognized huge page size 0x%lx\n",
__func__, pagesize);
}
return entry;
}
void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, unsigned long sz)
{
int i, ncontig;
size_t pgsize;
ncontig = num_contig_ptes(sz, &pgsize);
for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
pte_clear(mm, addr, ptep);
}
pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
int ncontig;
size_t pgsize;
pte_t orig_pte = huge_ptep_get(ptep);
if (!pte_cont(orig_pte))
return ptep_get_and_clear(mm, addr, ptep);
ncontig = find_num_contig(mm, addr, ptep, &pgsize);
return get_clear_flush(mm, addr, ptep, pgsize, ncontig);
}
/*
* huge_ptep_set_access_flags will update access flags (dirty, accesssed)
* and write permission.
*
* For a contiguous huge pte range we need to check whether or not write
* permission has to change only on the first pte in the set. Then for
* all the contiguous ptes we need to check whether or not there is a
* discrepancy between dirty or young.
*/
static int __cont_access_flags_changed(pte_t *ptep, pte_t pte, int ncontig)
{
int i;
if (pte_write(pte) != pte_write(huge_ptep_get(ptep)))
return 1;
for (i = 0; i < ncontig; i++) {
pte_t orig_pte = huge_ptep_get(ptep + i);
if (pte_dirty(pte) != pte_dirty(orig_pte))
return 1;
if (pte_young(pte) != pte_young(orig_pte))
return 1;
}
return 0;
}
int huge_ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
{
int ncontig, i;
size_t pgsize = 0;
unsigned long pfn = pte_pfn(pte), dpfn;
pgprot_t hugeprot;
pte_t orig_pte;
if (!pte_cont(pte))
return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
ncontig = find_num_contig(vma->vm_mm, addr, ptep, &pgsize);
dpfn = pgsize >> PAGE_SHIFT;
if (!__cont_access_flags_changed(ptep, pte, ncontig))
return 0;
orig_pte = get_clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig);
/* Make sure we don't lose the dirty or young state */
if (pte_dirty(orig_pte))
pte = pte_mkdirty(pte);
if (pte_young(orig_pte))
pte = pte_mkyoung(pte);
hugeprot = pte_pgprot(pte);
for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
set_pte_at(vma->vm_mm, addr, ptep, pfn_pte(pfn, hugeprot));
return 1;
}
void huge_ptep_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
unsigned long pfn, dpfn;
pgprot_t hugeprot;
int ncontig, i;
size_t pgsize;
pte_t pte;
if (!pte_cont(READ_ONCE(*ptep))) {
ptep_set_wrprotect(mm, addr, ptep);
return;
}
ncontig = find_num_contig(mm, addr, ptep, &pgsize);
dpfn = pgsize >> PAGE_SHIFT;
pte = get_clear_flush(mm, addr, ptep, pgsize, ncontig);
pte = pte_wrprotect(pte);
hugeprot = pte_pgprot(pte);
pfn = pte_pfn(pte);
for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
}
void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
size_t pgsize;
int ncontig;
if (!pte_cont(READ_ONCE(*ptep))) {
ptep_clear_flush(vma, addr, ptep);
return;
}
ncontig = find_num_contig(vma->vm_mm, addr, ptep, &pgsize);
clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig);
}
static void __init add_huge_page_size(unsigned long size)
{
if (size_to_hstate(size))
return;
hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
}
static int __init hugetlbpage_init(void)
{
#ifdef CONFIG_ARM64_4K_PAGES
add_huge_page_size(PUD_SIZE);
#endif
add_huge_page_size(CONT_PMD_SIZE);
add_huge_page_size(PMD_SIZE);
add_huge_page_size(CONT_PTE_SIZE);
return 0;
}
arch_initcall(hugetlbpage_init);
static __init int setup_hugepagesz(char *opt)
{
unsigned long ps = memparse(opt, &opt);
switch (ps) {
#ifdef CONFIG_ARM64_4K_PAGES
case PUD_SIZE:
#endif
case CONT_PMD_SIZE:
case PMD_SIZE:
case CONT_PTE_SIZE:
add_huge_page_size(ps);
return 1;
}
hugetlb_bad_size();
pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
return 0;
}
__setup("hugepagesz=", setup_hugepagesz);