2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/arch/arm/mach-omap2/sleep34xx.S

769 lines
20 KiB
ArmAsm
Raw Normal View History

/*
* (C) Copyright 2007
* Texas Instruments
* Karthik Dasu <karthik-dp@ti.com>
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <plat/sram.h>
#include <mach/io.h>
#include "cm.h"
#include "prm.h"
#include "sdrc.h"
#include "control.h"
/*
* Registers access definitions
*/
#define SDRC_SCRATCHPAD_SEM_OFFS 0xc
#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\
(SDRC_SCRATCHPAD_SEM_OFFS)
#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\
OMAP3430_PM_PREPWSTST
#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
#define SRAM_BASE_P OMAP3_SRAM_PA
#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\
OMAP36XX_CONTROL_MEM_RTA_CTRL)
/* Move this as correct place is available */
#define SCRATCHPAD_MEM_OFFS 0x310
#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\
OMAP343X_CONTROL_MEM_WKUP +\
SCRATCHPAD_MEM_OFFS)
#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0)
#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1)
#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1)
#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
/*
* API functions
*/
/*
* The "get_*restore_pointer" functions are used to provide a
* physical restore address where the ROM code jumps while waking
* up from MPU OFF/OSWR state.
* The restore pointer is stored into the scratchpad.
*/
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
.word . - get_restore_pointer
.text
/* Function call to get the restore pointer for 3630 resume from OFF */
ENTRY(get_omap3630_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore_3630
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_omap3630_restore_pointer_sz)
.word . - get_omap3630_restore_pointer
.text
/* Function call to get the restore pointer for ES3 to resume from OFF */
ENTRY(get_es3_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore_es3
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_es3_restore_pointer_sz)
.word . - get_es3_restore_pointer
.text
/*
* L2 cache needs to be toggled for stable OFF mode functionality on 3630.
* This function sets up a flag that will allow for this toggling to take
* place on 3630. Hopefully some version in the future may not need this.
*/
ENTRY(enable_omap3630_toggle_l2_on_restore)
stmfd sp!, {lr} @ save registers on stack
/* Setup so that we will disable and enable l2 */
mov r1, #0x1
str r1, l2dis_3630
ldmfd sp!, {pc} @ restore regs and return
.text
/* Function to call rom code to save secure ram context */
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
and r3, r3, r12
ldr r12, sram_phy_addr_mask
orr r3, r3, r12
mov r0, #25 @ set service ID for PPA
mov r12, r0 @ copy secure service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
nop
nop
nop
nop
ldmfd sp!, {r1-r12, pc}
sram_phy_addr_mask:
.word SRAM_BASE_P
high_mask:
.word 0xffff
api_params:
.word 0x4, 0x0, 0x0, 0x1, 0x1
ENTRY(save_secure_ram_context_sz)
.word . - save_secure_ram_context
/*
* ======================
* == Idle entry point ==
* ======================
*/
/*
* Forces OMAP into idle state
*
* omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
* and executes the WFI instruction. Calling WFI effectively changes the
* power domains states to the desired target power states.
*
*
* Notes:
* - this code gets copied to internal SRAM at boot and after wake-up
* from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
* - when the OMAP wakes up it continues at different execution points
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
/*
* r0 contains restore pointer in sdram
* r1 contains information about saving context:
* 0 - No context lost
* 1 - Only L1 and logic lost
* 2 - Only L2 lost
* 3 - Both L1 and L2 lost
*/
/* Directly jump to WFI is the context save is not required */
cmp r1, #0x0
beq omap3_do_wfi
/* Otherwise fall through to the save context code */
save_context_wfi:
mov r8, r0 @ Store SDRAM address in r8
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
stmia r8!, {r4-r5} @ Push parameters for restore call
mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
stmia r8!, {r4-r5} @ Push parameters for restore call
/* Check what that target sleep state is from r1 */
cmp r1, #0x2 @ Only L2 lost, no need to save context
beq clean_caches
l1_logic_lost:
/* Store sp and spsr to SDRAM */
mov r4, sp
mrs r5, spsr
mov r6, lr
stmia r8!, {r4-r6}
/* Save all ARM registers */
/* Coprocessor access control register */
mrc p15, 0, r6, c1, c0, 2
stmia r8!, {r6}
/* TTBR0, TTBR1 and Translation table base control */
mrc p15, 0, r4, c2, c0, 0
mrc p15, 0, r5, c2, c0, 1
mrc p15, 0, r6, c2, c0, 2
stmia r8!, {r4-r6}
/*
* Domain access control register, data fault status register,
* and instruction fault status register
*/
mrc p15, 0, r4, c3, c0, 0
mrc p15, 0, r5, c5, c0, 0
mrc p15, 0, r6, c5, c0, 1
stmia r8!, {r4-r6}
/*
* Data aux fault status register, instruction aux fault status,
* data fault address register and instruction fault address register
*/
mrc p15, 0, r4, c5, c1, 0
mrc p15, 0, r5, c5, c1, 1
mrc p15, 0, r6, c6, c0, 0
mrc p15, 0, r7, c6, c0, 2
stmia r8!, {r4-r7}
/*
* user r/w thread and process ID, user r/o thread and process ID,
* priv only thread and process ID, cache size selection
*/
mrc p15, 0, r4, c13, c0, 2
mrc p15, 0, r5, c13, c0, 3
mrc p15, 0, r6, c13, c0, 4
mrc p15, 2, r7, c0, c0, 0
stmia r8!, {r4-r7}
/* Data TLB lockdown, instruction TLB lockdown registers */
mrc p15, 0, r5, c10, c0, 0
mrc p15, 0, r6, c10, c0, 1
stmia r8!, {r5-r6}
/* Secure or non secure vector base address, FCSE PID, Context PID*/
mrc p15, 0, r4, c12, c0, 0
mrc p15, 0, r5, c13, c0, 0
mrc p15, 0, r6, c13, c0, 1
stmia r8!, {r4-r6}
/* Primary remap, normal remap registers */
mrc p15, 0, r4, c10, c2, 0
mrc p15, 0, r5, c10, c2, 1
stmia r8!,{r4-r5}
/* Store current cpsr*/
mrs r2, cpsr
stmia r8!, {r2}
mrc p15, 0, r4, c1, c0, 0
/* save control register */
stmia r8!, {r4}
clean_caches:
/*
* Clean Data or unified cache to POU
* How to invalidate only L1 cache???? - #FIX_ME#
* mcr p15, 0, r11, c7, c11, 1
*/
cmp r1, #0x1 @ Check whether L2 inval is required
beq omap3_do_wfi
clean_l2:
/*
* jump out to kernel flush routine
* - reuse that code is better
* - it executes in a cached space so is faster than refetch per-block
* - should be faster and will change with kernel
* - 'might' have to copy address, load and jump to it
*/
ldr r1, kernel_flush
mov lr, pc
bx r1
omap3_do_wfi:
ldr r4, sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
str r5, [r4] @ write back to SDRC_POWER register
/* Data memory barrier and Data sync barrier */
mov r1, #0
mcr p15, 0, r1, c7, c10, 4
mcr p15, 0, r1, c7, c10, 5
/*
* ===================================
* == WFI instruction => Enter idle ==
* ===================================
*/
wfi @ wait for interrupt
/*
* ===================================
* == Resume path for non-OFF modes ==
* ===================================
*/
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bl wait_sdrc_ok
/*
* ===================================
* == Exit point from non-OFF modes ==
* ===================================
*/
ldmfd sp!, {r0-r12, pc} @ restore regs and return
/*
* ==============================
* == Resume path for OFF mode ==
* ==============================
*/
/*
* The restore_* functions are called by the ROM code
* when back from WFI in OFF mode.
* Cf. the get_*restore_pointer functions.
*
* restore_es3: applies to 34xx >= ES3.0
* restore_3630: applies to 36xx
* restore: common code for 3xxx
*/
restore_es3:
ldr r5, pm_prepwstst_core_p
ldr r4, [r5]
and r4, r4, #0x3
cmp r4, #0x0 @ Check if previous power state of CORE is OFF
bne restore
adr r0, es3_sdrc_fix
ldr r1, sram_base
ldr r2, es3_sdrc_fix_sz
mov r2, r2, ror #2
copy_to_sram:
ldmia r0!, {r3} @ val = *src
stmia r1!, {r3} @ *dst = val
subs r2, r2, #0x1 @ num_words--
bne copy_to_sram
ldr r1, sram_base
blx r1
b restore
restore_3630:
ldr r1, pm_prepwstst_core_p
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if previous power state of CORE is OFF
bne restore
/* Disable RTA before giving control */
ldr r1, control_mem_rta
mov r2, #OMAP36XX_RTA_DISABLE
str r2, [r1]
/* Fall through to common code for the remaining logic */
restore:
/*
* Check what was the reason for mpu reset and store the reason in r9:
* 0 - No context lost
* 1 - Only L1 and logic lost
* 2 - Only L2 lost - In this case, we wont be here
* 3 - Both L1 and L2 lost
*/
ldr r1, pm_pwstctrl_mpu
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if target power state was OFF or RET
moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
ldr r0, l2dis_3630
cmp r0, #0x1 @ should we disable L2 on 3630?
bne skipl2dis
mrc p15, 0, r0, c1, c0, 1
bic r0, r0, #2 @ disable L2 cache
mcr p15, 0, r0, c1, c0, 1
skipl2dis:
ldr r0, control_stat
ldr r1, [r0]
and r1, #0x700
cmp r1, #0x300
beq l2_inv_gp
mov r0, #40 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
adr r3, l2_inv_api_params @ r3 points to dummy parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
/* Write to Aux control register to set some bits */
mov r0, #42 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
/* Restore L2 aux control register */
@ set service ID for PPA
mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
mov r12, r0 @ copy service ID in r12
mov r1, #0 @ set task ID for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC]
adds r3, r3, #8 @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#endif
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalidate L2
.word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#12]
mov r12, #0x2
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r1, l2dis_3630
cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
bne skipl2reen
mrc p15, 0, r1, c1, c0, 1
orr r1, r1, #2 @ re-enable L2 cache
mcr p15, 0, r1, c1, c0, 1
skipl2reen:
mov r1, #0
/*
* Invalidate all instruction caches to PoU
* and flush branch target cache
*/
mcr p15, 0, r1, c7, c5, 0
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
adds r3, r3, #16
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
mov lr, r6
ldmia r3!, {r4-r9}
/* Coprocessor access Control Register */
mcr p15, 0, r4, c1, c0, 2
/* TTBR0 */
MCR p15, 0, r5, c2, c0, 0
/* TTBR1 */
MCR p15, 0, r6, c2, c0, 1
/* Translation table base control register */
MCR p15, 0, r7, c2, c0, 2
/* Domain access Control Register */
MCR p15, 0, r8, c3, c0, 0
/* Data fault status Register */
MCR p15, 0, r9, c5, c0, 0
ldmia r3!,{r4-r8}
/* Instruction fault status Register */
MCR p15, 0, r4, c5, c0, 1
/* Data Auxiliary Fault Status Register */
MCR p15, 0, r5, c5, c1, 0
/* Instruction Auxiliary Fault Status Register*/
MCR p15, 0, r6, c5, c1, 1
/* Data Fault Address Register */
MCR p15, 0, r7, c6, c0, 0
/* Instruction Fault Address Register*/
MCR p15, 0, r8, c6, c0, 2
ldmia r3!,{r4-r7}
/* User r/w thread and process ID */
MCR p15, 0, r4, c13, c0, 2
/* User ro thread and process ID */
MCR p15, 0, r5, c13, c0, 3
/* Privileged only thread and process ID */
MCR p15, 0, r6, c13, c0, 4
/* Cache size selection */
MCR p15, 2, r7, c0, c0, 0
ldmia r3!,{r4-r8}
/* Data TLB lockdown registers */
MCR p15, 0, r4, c10, c0, 0
/* Instruction TLB lockdown registers */
MCR p15, 0, r5, c10, c0, 1
/* Secure or Nonsecure Vector Base Address */
MCR p15, 0, r6, c12, c0, 0
/* FCSE PID */
MCR p15, 0, r7, c13, c0, 0
/* Context PID */
MCR p15, 0, r8, c13, c0, 1
ldmia r3!,{r4-r5}
/* Primary memory remap register */
MCR p15, 0, r4, c10, c2, 0
/* Normal memory remap register */
MCR p15, 0, r5, c10, c2, 1
/* Restore cpsr */
ldmia r3!,{r4} @ load CPSR from SDRAM
msr cpsr, r4 @ store cpsr
/* Enabling MMU here */
mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
and r7, #0x7
cmp r7, #0x0
beq usettbr0
ttbr_error:
/*
* More work needs to be done to support N[0:2] value other than 0
* So looping here so that the error can be detected
*/
b ttbr_error
usettbr0:
mrc p15, 0, r2, c2, c0, 0
ldr r5, ttbrbit_mask
and r2, r5
mov r4, pc
ldr r5, table_index_mask
and r4, r5 @ r4 = 31 to 20 bits of pc
/* Extract the value to be written to table entry */
ldr r1, table_entry
/* r1 has the value to be written to table entry*/
add r1, r1, r4
/* Getting the address of table entry to modify */
lsr r4, #18
/* r2 has the location which needs to be modified */
add r2, r4
/* Storing previous entry of location being modified */
ldr r5, scratchpad_base
ldr r4, [r2]
str r4, [r5, #0xC0]
/* Modify the table entry */
str r1, [r2]
/*
* Storing address of entry being modified
* - will be restored after enabling MMU
*/
ldr r5, scratchpad_base
str r2, [r5, #0xC4]
mov r0, #0
mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
/*
* Restore control register. This enables the MMU.
* The caches and prediction are not enabled here, they
* will be enabled after restoring the MMU table entry.
*/
ldmia r3!, {r4}
/* Store previous value of control register in scratchpad */
str r4, [r5, #0xC8]
ldr r2, cache_pred_disable_mask
and r4, r2
mcr p15, 0, r4, c1, c0, 0
/*
* ==============================
* == Exit point from OFF mode ==
* ==============================
*/
ldmfd sp!, {r0-r12, pc} @ restore regs and return
/*
* Internal functions
*/
/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
.text
ENTRY(es3_sdrc_fix)
ldr r4, sdrc_syscfg @ get config addr
ldr r5, [r4] @ get value
tst r5, #0x100 @ is part access blocked
it eq
biceq r5, r5, #0x100 @ clear bit if set
str r5, [r4] @ write back change
ldr r4, sdrc_mr_0 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_emr2_0 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_manual_0 @ get config addr
mov r5, #0x2 @ autorefresh command
str r5, [r4] @ kick off refreshes
ldr r4, sdrc_mr_1 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_emr2_1 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_manual_1 @ get config addr
mov r5, #0x2 @ autorefresh command
str r5, [r4] @ kick off refreshes
bx lr
sdrc_syscfg:
.word SDRC_SYSCONFIG_P
sdrc_mr_0:
.word SDRC_MR_0_P
sdrc_emr2_0:
.word SDRC_EMR2_0_P
sdrc_manual_0:
.word SDRC_MANUAL_0_P
sdrc_mr_1:
.word SDRC_MR_1_P
sdrc_emr2_1:
.word SDRC_EMR2_1_P
sdrc_manual_1:
.word SDRC_MANUAL_1_P
ENTRY(es3_sdrc_fix_sz)
.word . - es3_sdrc_fix
/*
* This function implements the erratum ID i581 WA:
* SDRC state restore before accessing the SDRAM
*
* Only used at return from non-OFF mode. For OFF
* mode the ROM code configures the SDRC and
* the DPLL before calling the restore code directly
* from DDR.
*/
/* Make sure SDRC accesses are ok */
wait_sdrc_ok:
/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
ldr r4, cm_idlest_ckgen
wait_dpll3_lock:
ldr r5, [r4]
tst r5, #1
beq wait_dpll3_lock
ldr r4, cm_idlest1_core
wait_sdrc_ready:
ldr r5, [r4]
tst r5, #0x2
bne wait_sdrc_ready
/* allow DLL powerdown upon hw idle req */
ldr r4, sdrc_power
ldr r5, [r4]
bic r5, r5, #0x40
str r5, [r4]
is_dll_in_lock_mode:
/* Is dll in lock mode? */
ldr r4, sdrc_dlla_ctrl
ldr r5, [r4]
tst r5, #0x4
bxne lr @ Return if locked
/* wait till dll locks */
wait_dll_lock_timed:
ldr r4, wait_dll_lock_counter
add r4, r4, #1
str r4, wait_dll_lock_counter
ldr r4, sdrc_dlla_status
/* Wait 20uS for lock */
mov r6, #8
wait_dll_lock:
subs r6, r6, #0x1
beq kick_dll
ldr r5, [r4]
and r5, r5, #0x4
cmp r5, #0x4
bne wait_dll_lock
bx lr @ Return when locked
/* disable/reenable DLL if not locked */
kick_dll:
ldr r4, sdrc_dlla_ctrl
ldr r5, [r4]
mov r6, r5
bic r6, #(1<<3) @ disable dll
str r6, [r4]
dsb
orr r6, r6, #(1<<3) @ enable dll
str r6, [r4]
dsb
ldr r4, kick_counter
add r4, r4, #1
str r4, kick_counter
b wait_dll_lock_timed
cm_idlest1_core:
.word CM_IDLEST1_CORE_V
cm_idlest_ckgen:
.word CM_IDLEST_CKGEN_V
sdrc_dlla_status:
.word SDRC_DLLA_STATUS_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
pm_prepwstst_core_p:
.word PM_PREPWSTST_CORE_P
pm_pwstctrl_mpu:
.word PM_PWSTCTRL_MPU_P
scratchpad_base:
.word SCRATCHPAD_BASE_P
sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
.word SDRC_POWER_V
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
.word 0xFFF00000
table_entry:
.word 0x00000C02
cache_pred_disable_mask:
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
control_mem_rta:
.word CONTROL_MEM_RTA_CTRL
kernel_flush:
.word v7_flush_dcache_all
l2dis_3630:
.word 0
/*
* When exporting to userspace while the counters are in SRAM,
* these 2 words need to be at the end to facilitate retrival!
*/
kick_counter:
.word 0
wait_dll_lock_counter:
.word 0
ENTRY(omap34xx_cpu_suspend_sz)
.word . - omap34xx_cpu_suspend