renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
Code
c6a64de08e
linux-next/drivers/usb/Makefile

62 lines
1.6 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Makefile for the kernel USB device drivers.
#
# Object files in subdirectories
obj-$(CONFIG_USB) += core/
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 23:10:58 +08:00
obj-$(CONFIG_USB_DWC3) += dwc3/
Move DWC2 driver out of staging The DWC2 driver should now be in good enough shape to move out of staging. I have stress tested it overnight on RPI running mass storage and Ethernet transfers in parallel, and for several days on our proprietary PCI-based platform. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-14 05:50:09 +08:00
obj-$(CONFIG_USB_DWC2) += dwc2/
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 23:10:58 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_MON) += mon/
[PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
2005-09-24 08:14:37 +08:00
obj-$(CONFIG_PCI) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_EHCI_HCD) += host/
[PATCH] USB: Add isp116x-hcd USB host controller driver This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-10 03:57:39 +08:00
obj-$(CONFIG_USB_ISP116X_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
USB: Driver for Freescale QUICC Engine USB Host Controller This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-10 10:03:21 +08:00
obj-$(CONFIG_USB_FHCI_HCD) += host/
USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. Add Makefile and Kconfig entries for the xHCI host controller driver. List Sarah Sharp as the maintainer for the xHCI driver. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 10:07:13 +08:00
obj-$(CONFIG_USB_XHCI_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_SL811_HCD) += host/
USB: NXP ISP1362 USB host driver Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-17 08:51:21 +08:00
obj-$(CONFIG_USB_ISP1362_HCD) += host/
USB: u132-hcd: host controller driver for ELAN U132 adapter This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 18:27:35 +08:00
obj-$(CONFIG_USB_U132_HCD) += host/
USB: r8a66597-hcd: host controller driver for R8A66597 I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-10 12:18:19 +08:00
obj-$(CONFIG_USB_R8A66597_HCD) += host/
wusb: add HWA host controller driver Add a driver for Wireless USB host controllers connected via USB (a Host Wire Adapter or HWA). Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 23:34:30 +08:00
obj-$(CONFIG_USB_HWA_HCD) += host/
USB: Add platform device support for the ISP1760 USB chip Currently, the driver only supports PCI and PPC_OF but there are boards like ARM RealView where this is a platform device. The patch adds the necessary functions and registration to the isp1760-if.c file and modifies the corresponding Makefile and Kconfig to be able to use this driver even if PCI and PPC_OF are not enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-11 00:55:51 +08:00
obj-$(CONFIG_USB_ISP1760_HCD) += host/
USB: MXC: Add i.MX21 specific USB host controller driver. This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-21 19:14:48 +08:00
obj-$(CONFIG_USB_IMX21_HCD) += host/
USB: fix build of FSL MPH DR OF platform driver When only FSL USB gadget driver is selected in the kernel configuration the MPH DR OF driver for creation of FSL USB platform devices from device tree won't be built. As a result no USB platform devices for MPH DR USB controller will be created at run time and no probing will be done in the fsl_udc_core driver. Add an entry to the Makefile to build the MPH DR OF platform driver if CONFIG_USB_FSL_MPH_DR_OF is defined. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19 04:01:56 +08:00
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += host/
usb host: Faraday USB2.0 FUSBH200-HCD driver FUSBH200-HCD is an USB2.0 hcd for Faraday FUSBH200. FUSBH200 is an ehci-like controller with some differences. First, register layout of FUSBH200 is incompatible with EHCI. Furthermore, FUSBH200 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17 18:14:14 +08:00
obj-$(CONFIG_USB_FUSBH200_HCD) += host/
usb: host: Faraday fotg210-hcd driver FOTG210 is an OTG controller which can be configured as an USB2.0 host. FOTG210 host is an ehci-like controller with some differences. First, register layout of FOTG210 is incompatible with EHCI. Furthermore, FOTG210 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Feng-Hsin Chiang <john453@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-30 00:48:32 +08:00
obj-$(CONFIG_USB_FOTG210_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: add Cypress c67x00 OTG controller HCD driver This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-27 14:59:45 +08:00
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
wusb: add the Wireless USB core (build-system) Add the WUSB build system (Kconfig and Kbuild) files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 23:34:26 +08:00
obj-$(CONFIG_USB_WUSB) += wusbcore/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work. If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 03:53:02 +08:00
obj-$(CONFIG_USB_WDM) += class/
obj-$(CONFIG_USB_TMC) += class/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_STORAGE) += storage/
[PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-23 11:15:09 +08:00
obj-$(CONFIG_USB) += storage/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_MDC800) += image/
obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
USB: always visit drivers/usb/misc/ Currently, every driver under drivers/usb/misc/ also has to be listed in drivers/usb/Makefile. This has been forgotten more than once, and this patch changes drivers/usb/Makefile to simply always visit drivers/usb/misc/ when building the USB code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Toralf Förster <toralf.foerster@gmx.de> Acked-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-12 01:10:21 +08:00
obj-$(CONFIG_USB) += misc/
usb: phy: make PHY driver selection possible by controller drivers Convert PHY Drivers from menuconfig to menu so that the PHY drivers can be explicitely selected by the controller drivers. USB_PHY is no longer a user visible option. It is upto to the PHY drivers to select it if needed. This patch does so for the existing PHY drivers that use the USB_PHY library. Doing so moves the USB_PHY and PHY driver selection problem from the end user to the PHY and controller driver developer. e.g. Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver depended on USB_PHY. Making the controller driver depend on USB_PHY has a negative effect i.e. it becomes invisible to the user till USB_PHY is enabled. Most end users will not familiar with this. With this patch, the end user just needs to select the controller driver needed for his/her platform without worrying about which PHY driver to select. Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend on USB_PHY any more. They can safely select the necessary PHY drivers. [ balbi@ti.com : refreshed on top of my next branch. Changed bool followed by default n into def_bool n ] CC: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-14 17:51:41 +08:00
obj-$(CONFIG_USB_SUPPORT) += phy/
USB: drivers/usb/Makefile: conditionally descend to 'early' Don't descend to the EARLY_PRINTK_DBGP directory unless it is actually used. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-27 23:27:51 +08:00
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
usb: don't enter usb subdirectories directly Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07 15:59:34 +08:00
obj-$(CONFIG_USB_MUSB_HDRC) += musb/
usb: move ci13xxx and related code to drivers/usb/chipidea Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:45 +08:00
obj-$(CONFIG_USB_CHIPIDEA) += chipidea/
usb: don't enter usb subdirectories directly Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07 15:59:34 +08:00
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
obj-$(CONFIG_USB_GADGET) += gadget/
usb: Provide usb_speed_string() function In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-30 23:11:19 +08:00
obj-$(CONFIG_USB_COMMON) += usb-common.o
Copy Permalink