2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/drivers/net/wireless/wl12xx/wl1271_cmd.c

1064 lines
27 KiB
C
Raw Normal View History

/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
#include "wl1271.h"
#include "wl1271_reg.h"
#include "wl1271_spi.h"
#include "wl1271_acx.h"
#include "wl12xx_80211.h"
#include "wl1271_cmd.h"
/*
* send command to firmware
*
* @wl: wl struct
* @id: command id
* @buf: buffer containing the command, must work with dma
* @len: length of the buffer
*/
int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
size_t res_len)
{
struct wl1271_cmd_header *cmd;
unsigned long timeout;
u32 intr;
int ret = 0;
u16 status;
cmd = buf;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->id = cpu_to_le16(id);
cmd->status = 0;
WARN_ON(len % 4 != 0);
wl1271_spi_write(wl, wl->cmd_box_addr, buf, len, false);
wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
ret = -ETIMEDOUT;
goto out;
}
msleep(1);
intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
}
/* read back the status code of the command */
if (res_len == 0)
res_len = sizeof(struct wl1271_cmd_header);
wl1271_spi_read(wl, wl->cmd_box_addr, cmd, res_len, false);
status = le16_to_cpu(cmd->status);
if (status != CMD_STATUS_SUCCESS) {
wl1271_error("command execute failure %d", status);
ret = -EIO;
}
wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
WL1271_ACX_INTR_CMD_COMPLETE);
out:
return ret;
}
static int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
{
struct wl1271_cmd_cal_channel_tune *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->test.id = TEST_CMD_CHANNEL_TUNE;
cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4;
/* set up any channel, 7 is in the middle of the range */
cmd->channel = 7;
ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_CHANNEL_TUNE failed");
kfree(cmd);
return ret;
}
static int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
{
struct wl1271_cmd_cal_update_ref_point *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT;
/* FIXME: still waiting for the correct values */
cmd->ref_power = 0;
cmd->ref_detector = 0;
cmd->sub_band = WL1271_PD_REFERENCE_POINT_BAND_B_G;
ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed");
kfree(cmd);
return ret;
}
static int wl1271_cmd_cal_p2g(struct wl1271 *wl)
{
struct wl1271_cmd_cal_p2g *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->test.id = TEST_CMD_P2G_CAL;
cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G;
ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_P2G_CAL failed");
kfree(cmd);
return ret;
}
static int wl1271_cmd_cal(struct wl1271 *wl)
{
/*
* FIXME: we must make sure that we're not sleeping when calibration
* is done
*/
int ret;
wl1271_notice("performing tx calibration");
ret = wl1271_cmd_cal_channel_tune(wl);
if (ret < 0)
return ret;
ret = wl1271_cmd_cal_update_ref_point(wl);
if (ret < 0)
return ret;
ret = wl1271_cmd_cal_p2g(wl);
if (ret < 0)
return ret;
return ret;
}
int wl1271_cmd_general_parms(struct wl1271 *wl)
{
struct wl1271_general_parms_cmd *gen_parms;
struct conf_general_parms *g = &wl->conf.init.genparam;
int ret;
gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
if (!gen_parms)
return -ENOMEM;
gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
gen_parms->ref_clk = g->ref_clk;
gen_parms->settling_time = g->settling_time;
gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
gen_parms->dc2dcmode = g->dc2dcmode;
gen_parms->single_dual_band = g->single_dual_band;
gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
gen_parms->settings = g->settings;
gen_parms->sr_state = g->sr_state;
memcpy(gen_parms->srf1,
g->srf1,
CONF_MAX_SMART_REFLEX_PARAMS);
memcpy(gen_parms->srf2,
g->srf2,
CONF_MAX_SMART_REFLEX_PARAMS);
memcpy(gen_parms->srf3,
g->srf3,
CONF_MAX_SMART_REFLEX_PARAMS);
memcpy(gen_parms->sr_debug_table,
g->sr_debug_table,
CONF_MAX_SMART_REFLEX_PARAMS);
gen_parms->sr_sen_n_p = g->sr_sen_n_p;
gen_parms->sr_sen_n_p_gain = g->sr_sen_n_p_gain;
gen_parms->sr_sen_nrn = g->sr_sen_nrn;
gen_parms->sr_sen_prn = g->sr_sen_prn;
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
if (ret < 0)
wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
kfree(gen_parms);
return ret;
}
int wl1271_cmd_radio_parms(struct wl1271 *wl)
{
struct wl1271_radio_parms_cmd *radio_parms;
struct conf_radio_parms *r = &wl->conf.init.radioparam;
int i, ret;
radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
if (!radio_parms)
return -ENOMEM;
radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
/* Static radio parameters */
radio_parms->rx_trace_loss = r->rx_trace_loss;
radio_parms->tx_trace_loss = r->tx_trace_loss;
memcpy(radio_parms->rx_rssi_and_proc_compens,
r->rx_rssi_and_proc_compens,
CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
CONF_NUMBER_OF_SUB_BANDS_5);
memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
CONF_NUMBER_OF_SUB_BANDS_5);
memcpy(radio_parms->rx_rssi_and_proc_compens_5,
r->rx_rssi_and_proc_compens_5,
CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
/* Dynamic radio parameters */
radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
radio_parms->tx_ref_power = r->tx_ref_power;
radio_parms->tx_offset_db = r->tx_offset_db;
memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_rate_limits_extreme, r->tx_rate_limits_extreme,
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
CONF_NUMBER_OF_CHANNELS_2_4);
memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
CONF_NUMBER_OF_CHANNELS_2_4);
memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
radio_parms->degraded_low_to_normal_threshold =
r->degraded_low_to_normal_threshold;
radio_parms->degraded_normal_to_high_threshold =
r->degraded_normal_to_high_threshold;
for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
radio_parms->tx_ref_pd_voltage_5[i] =
cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
CONF_NUMBER_OF_SUB_BANDS_5);
memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
CONF_NUMBER_OF_SUB_BANDS_5);
memcpy(radio_parms->tx_rate_limits_normal_5,
r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_rate_limits_degraded_5,
r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_rate_limits_extreme_5,
r->tx_rate_limits_extreme_5, CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_channel_limits_ofdm_5,
r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->rx_fem_insertion_loss_5,
r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
radio_parms->degraded_low_to_normal_threshold_5 =
r->degraded_low_to_normal_threshold_5;
radio_parms->degraded_normal_to_high_threshold_5 =
r->degraded_normal_to_high_threshold_5;
wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
radio_parms, sizeof(*radio_parms));
ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
if (ret < 0)
wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
kfree(radio_parms);
return ret;
}
int wl1271_cmd_join(struct wl1271 *wl)
{
static bool do_cal = true;
struct wl1271_cmd_join *join;
int ret, i;
u8 *bssid;
/* FIXME: remove when we get calibration from the factory */
if (do_cal) {
ret = wl1271_cmd_cal(wl);
if (ret < 0)
wl1271_warning("couldn't calibrate");
else
do_cal = false;
}
join = kzalloc(sizeof(*join), GFP_KERNEL);
if (!join) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd join");
/* Reverse order BSSID */
bssid = (u8 *) &join->bssid_lsb;
for (i = 0; i < ETH_ALEN; i++)
bssid[i] = wl->bssid[ETH_ALEN - i - 1];
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
join->rx_config_options = cpu_to_le32(wl->rx_config);
join->rx_filter_options = cpu_to_le32(wl->rx_filter);
join->bss_type = wl->bss_type;
/*
* FIXME: disable temporarily all filters because after commit
* 9cef8737 "mac80211: fix managed mode BSSID handling" broke
* association. The filter logic needs to be implemented properly
* and once that is done, this hack can be removed.
*/
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
join->rx_config_options = cpu_to_le32(0);
join->rx_filter_options = cpu_to_le32(WL1271_DEFAULT_RX_FILTER);
if (wl->band == IEEE80211_BAND_2GHZ)
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_1MBPS |
CONF_HW_BIT_RATE_2MBPS |
CONF_HW_BIT_RATE_5_5MBPS |
CONF_HW_BIT_RATE_11MBPS);
else {
join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_6MBPS |
CONF_HW_BIT_RATE_12MBPS |
CONF_HW_BIT_RATE_24MBPS);
}
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
join->beacon_interval = cpu_to_le16(WL1271_DEFAULT_BEACON_INT);
join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
join->channel = wl->channel;
join->ssid_len = wl->ssid_len;
memcpy(join->ssid, wl->ssid, wl->ssid_len);
join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH;
/* increment the session counter */
wl->session_counter++;
if (wl->session_counter >= SESSION_COUNTER_MAX)
wl->session_counter = 0;
join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
/* reset TX security counters */
wl->tx_security_last_seq = 0;
wl->tx_security_seq_16 = 0;
wl->tx_security_seq_32 = 0;
ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd join");
goto out_free;
}
/*
* ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
* simplify locking we just sleep instead, for now
*/
msleep(10);
out_free:
kfree(join);
out:
return ret;
}
/**
* send test command to firmware
*
* @wl: wl struct
* @buf: buffer containing the command, with all headers, must work with dma
* @len: length of the buffer
* @answer: is answer needed
*/
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
{
int ret;
size_t res_len = 0;
wl1271_debug(DEBUG_CMD, "cmd test");
if (answer)
res_len = buf_len;
ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len);
if (ret < 0) {
wl1271_warning("TEST command failed");
return ret;
}
return ret;
}
/**
* read acx from firmware
*
* @wl: wl struct
* @id: acx id
* @buf: buffer for the response, including all headers, must work with dma
* @len: lenght of buf
*/
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
{
struct acx_header *acx = buf;
int ret;
wl1271_debug(DEBUG_CMD, "cmd interrogate");
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->id = cpu_to_le16(id);
/* payload length, does not include any headers */
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->len = cpu_to_le16(len - sizeof(*acx));
ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len);
if (ret < 0)
wl1271_error("INTERROGATE command failed");
return ret;
}
/**
* write acx value to firmware
*
* @wl: wl struct
* @id: acx id
* @buf: buffer containing acx, including all headers, must work with dma
* @len: length of buf
*/
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
{
struct acx_header *acx = buf;
int ret;
wl1271_debug(DEBUG_CMD, "cmd configure");
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->id = cpu_to_le16(id);
/* payload length, does not include any headers */
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
acx->len = cpu_to_le16(len - sizeof(*acx));
ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0);
if (ret < 0) {
wl1271_warning("CONFIGURE command NOK");
return ret;
}
return 0;
}
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
{
struct cmd_enabledisable_path *cmd;
int ret;
u16 cmd_rx, cmd_tx;
wl1271_debug(DEBUG_CMD, "cmd data path");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
/* the channel here is only used for calibration, so hardcoded to 1 */
cmd->channel = 1;
if (enable) {
cmd_rx = CMD_ENABLE_RX;
cmd_tx = CMD_ENABLE_TX;
} else {
cmd_rx = CMD_DISABLE_RX;
cmd_tx = CMD_DISABLE_TX;
}
ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("rx %s cmd for channel %d failed",
enable ? "start" : "stop", cmd->channel);
goto out;
}
wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
enable ? "start" : "stop", cmd->channel);
ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("tx %s cmd for channel %d failed",
enable ? "start" : "stop", cmd->channel);
return ret;
}
wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
enable ? "start" : "stop", cmd->channel);
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
{
struct wl1271_cmd_ps_params *ps_params = NULL;
int ret = 0;
/* FIXME: this should be in ps.c */
ret = wl1271_acx_wake_up_conditions(wl);
if (ret < 0) {
wl1271_error("couldn't set wake up conditions");
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd set ps mode");
ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
if (!ps_params) {
ret = -ENOMEM;
goto out;
}
ps_params->ps_mode = ps_mode;
ps_params->send_null_data = send;
ps_params->retries = 5;
ps_params->hang_over_period = 128;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
sizeof(*ps_params), 0);
if (ret < 0) {
wl1271_error("cmd set_ps_mode failed");
goto out;
}
out:
kfree(ps_params);
return ret;
}
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len)
{
struct cmd_read_write_memory *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd read memory");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
WARN_ON(len > MAX_READ_SIZE);
len = min_t(size_t, len, MAX_READ_SIZE);
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->addr = cpu_to_le32(addr);
cmd->size = cpu_to_le32(len);
ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd),
sizeof(*cmd));
if (ret < 0) {
wl1271_error("read memory command failed: %d", ret);
goto out;
}
/* the read command got in */
memcpy(answer, cmd->value, len);
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
u8 active_scan, u8 high_prio, u8 band,
u8 probe_requests)
{
struct wl1271_cmd_trigger_scan_to *trigger = NULL;
struct wl1271_cmd_scan *params = NULL;
struct ieee80211_channel *channels;
int i, j, n_ch, ret;
u16 scan_options = 0;
u8 ieee_band;
if (band == WL1271_SCAN_BAND_2_4_GHZ)
ieee_band = IEEE80211_BAND_2GHZ;
else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled())
ieee_band = IEEE80211_BAND_2GHZ;
else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled())
ieee_band = IEEE80211_BAND_5GHZ;
else
return -EINVAL;
if (wl->hw->wiphy->bands[ieee_band]->channels == NULL)
return -EINVAL;
channels = wl->hw->wiphy->bands[ieee_band]->channels;
n_ch = wl->hw->wiphy->bands[ieee_band]->n_channels;
if (test_bit(WL1271_FLAG_SCANNING, &wl->flags))
return -EINVAL;
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;
params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
params->params.rx_filter_options =
cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
if (!active_scan)
scan_options |= WL1271_SCAN_OPT_PASSIVE;
if (high_prio)
scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
params->params.scan_options = cpu_to_le16(scan_options);
params->params.num_probe_requests = probe_requests;
/* Let the fw autodetect suitable tx_rate for probes */
params->params.tx_rate = 0;
params->params.tid_trigger = 0;
params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
if (band == WL1271_SCAN_BAND_DUAL)
params->params.band = WL1271_SCAN_BAND_2_4_GHZ;
else
params->params.band = band;
for (i = 0, j = 0; i < n_ch && i < WL1271_SCAN_MAX_CHANNELS; i++) {
if (!(channels[i].flags & IEEE80211_CHAN_DISABLED)) {
params->channels[j].min_duration =
cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
params->channels[j].max_duration =
cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
memset(&params->channels[j].bssid_lsb, 0xff, 4);
memset(&params->channels[j].bssid_msb, 0xff, 2);
params->channels[j].early_termination = 0;
params->channels[j].tx_power_att =
WL1271_SCAN_CURRENT_TX_PWR;
params->channels[j].channel = channels[i].hw_value;
j++;
}
}
params->params.num_channels = j;
if (len && ssid) {
params->params.ssid_len = len;
memcpy(params->params.ssid, ssid, len);
}
ret = wl1271_cmd_build_probe_req(wl, ssid, len, ieee_band);
if (ret < 0) {
wl1271_error("PROBE request template failed");
goto out;
}
trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
if (!trigger) {
ret = -ENOMEM;
goto out;
}
/* disable the timeout */
trigger->timeout = 0;
ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
sizeof(*trigger), 0);
if (ret < 0) {
wl1271_error("trigger scan to failed for hw scan");
goto out;
}
wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
set_bit(WL1271_FLAG_SCANNING, &wl->flags);
if (wl1271_11a_enabled()) {
wl->scan.state = band;
if (band == WL1271_SCAN_BAND_DUAL) {
wl->scan.active = active_scan;
wl->scan.high_prio = high_prio;
wl->scan.probe_requests = probe_requests;
if (len && ssid) {
wl->scan.ssid_len = len;
memcpy(wl->scan.ssid, ssid, len);
} else
wl->scan.ssid_len = 0;
}
}
ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0);
if (ret < 0) {
wl1271_error("SCAN failed");
clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
goto out;
}
out:
kfree(params);
return ret;
}
int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
void *buf, size_t buf_len)
{
struct wl1271_cmd_template_set *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id);
WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE);
buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->len = cpu_to_le16(buf_len);
cmd->template_type = template_id;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->enabled_rates = cpu_to_le32(wl->conf.tx.rc_conf.enabled_rates);
cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit;
cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit;
if (buf)
memcpy(cmd->template_data, buf, buf_len);
ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("cmd set_template failed: %d", ret);
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
static int wl1271_build_basic_rates(u8 *rates, u8 band)
{
u8 index = 0;
if (band == IEEE80211_BAND_2GHZ) {
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
} else if (band == IEEE80211_BAND_5GHZ) {
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
} else {
wl1271_error("build_basic_rates invalid band: %d", band);
}
return index;
}
static int wl1271_build_extended_rates(u8 *rates, u8 band)
{
u8 index = 0;
if (band == IEEE80211_BAND_2GHZ) {
rates[index++] = IEEE80211_OFDM_RATE_6MB;
rates[index++] = IEEE80211_OFDM_RATE_9MB;
rates[index++] = IEEE80211_OFDM_RATE_12MB;
rates[index++] = IEEE80211_OFDM_RATE_18MB;
rates[index++] = IEEE80211_OFDM_RATE_24MB;
rates[index++] = IEEE80211_OFDM_RATE_36MB;
rates[index++] = IEEE80211_OFDM_RATE_48MB;
rates[index++] = IEEE80211_OFDM_RATE_54MB;
} else if (band == IEEE80211_BAND_5GHZ) {
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
rates[index++] =
IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
} else {
wl1271_error("build_basic_rates invalid band: %d", band);
}
return index;
}
int wl1271_cmd_build_null_data(struct wl1271 *wl)
{
struct wl12xx_null_data_template template;
if (!is_zero_ether_addr(wl->bssid)) {
memcpy(template.header.da, wl->bssid, ETH_ALEN);
memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
} else {
memset(template.header.da, 0xff, ETH_ALEN);
memset(template.header.bssid, 0xff, ETH_ALEN);
}
memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
IEEE80211_STYPE_NULLFUNC |
IEEE80211_FCTL_TODS);
return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template,
sizeof(template));
}
int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid)
{
struct wl12xx_ps_poll_template template;
memcpy(template.bssid, wl->bssid, ETH_ALEN);
memcpy(template.ta, wl->mac_addr, ETH_ALEN);
/* aid in PS-Poll has its two MSBs each set to 1 */
template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid);
template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template,
sizeof(template));
}
int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
u8 band)
{
struct wl12xx_probe_req_template template;
struct wl12xx_ie_rates *rates;
char *ptr;
u16 size;
int ret;
ptr = (char *)&template;
size = sizeof(struct ieee80211_header);
memset(template.header.da, 0xff, ETH_ALEN);
memset(template.header.bssid, 0xff, ETH_ALEN);
memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
/* IEs */
/* SSID */
template.ssid.header.id = WLAN_EID_SSID;
template.ssid.header.len = ssid_len;
if (ssid_len && ssid)
memcpy(template.ssid.ssid, ssid, ssid_len);
size += sizeof(struct wl12xx_ie_header) + ssid_len;
ptr += size;
/* Basic Rates */
rates = (struct wl12xx_ie_rates *)ptr;
rates->header.id = WLAN_EID_SUPP_RATES;
rates->header.len = wl1271_build_basic_rates(rates->rates, band);
size += sizeof(struct wl12xx_ie_header) + rates->header.len;
ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
/* Extended rates */
rates = (struct wl12xx_ie_rates *)ptr;
rates->header.id = WLAN_EID_EXT_SUPP_RATES;
rates->header.len = wl1271_build_extended_rates(rates->rates, band);
size += sizeof(struct wl12xx_ie_header) + rates->header.len;
wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
if (band == IEEE80211_BAND_2GHZ)
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
&template, size);
else
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
&template, size);
return ret;
}
int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->id = id;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->key_action = cpu_to_le16(KEY_SET_ID);
cmd->key_type = KEY_WEP;
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("cmd set_default_wep_key failed: %d", ret);
goto out;
}
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
u8 key_size, const u8 *key, const u8 *addr,
u32 tx_seq_32, u16 tx_seq_16)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
if (key_type != KEY_WEP)
memcpy(cmd->addr, addr, ETH_ALEN);
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->key_action = cpu_to_le16(action);
cmd->key_size = key_size;
cmd->key_type = key_type;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16);
cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32);
/* we have only one SSID profile */
cmd->ssid_profile = 0;
cmd->id = id;
if (key_type == KEY_TKIP) {
/*
* We get the key in the following form:
* TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
* but the target is expecting:
* TKIP - RX MIC - TX MIC
*/
memcpy(cmd->key, key, 16);
memcpy(cmd->key + 16, key + 24, 8);
memcpy(cmd->key + 24, key + 16, 8);
} else {
memcpy(cmd->key, key, key_size);
}
wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("could not set keys");
goto out;
}
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_disconnect(struct wl1271 *wl)
{
struct wl1271_cmd_disconnect *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd disconnect");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
cmd->rx_config_options = cpu_to_le32(wl->rx_config);
cmd->rx_filter_options = cpu_to_le32(wl->rx_filter);
/* disconnect reason is not used in immediate disconnections */
cmd->type = DISCONNECT_IMMEDIATE;
ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send disconnect command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}