mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
59 lines
1.8 KiB
Plaintext
59 lines
1.8 KiB
Plaintext
|
Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
|
||
|
|
--------------------------------------------------------------------
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
- compatible : "samsung,s5k5baf";
|
||
|
|
- reg : I2C slave address of the sensor;
|
||
|
|
- vdda-supply : analog power supply 2.8V (2.6V to 3.0V);
|
||
|
|
- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V)
|
||
|
|
or 2.8V (2.6V to 3.0);
|
||
|
|
- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V)
|
||
|
|
or 2.8V (2.5V to 3.1V);
|
||
|
|
- stbyn-gpios : GPIO connected to STDBYN pin;
|
||
|
|
- rstn-gpios : GPIO connected to RSTN pin;
|
||
|
|
- clocks : list of phandle and clock specifier pairs
|
||
|
|
according to common clock bindings for the
|
||
|
|
clocks described in clock-names;
|
||
|
|
- clock-names : should include "mclk" for the sensor's master clock;
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
|
||
|
|
- clock-frequency : the frequency at which the "mclk" clock should be
|
||
|
|
configured to operate, in Hz; if this property is not
|
||
|
|
specified default 24 MHz value will be used.
|
||
|
|
|
||
|
|
The device node should contain one 'port' child node with one child 'endpoint'
|
||
|
|
node, according to the bindings defined in Documentation/devicetree/bindings/
|
||
|
|
media/video-interfaces.txt. The following are properties specific to those
|
||
|
|
nodes.
|
||
|
|
|
||
|
|
endpoint node
|
||
|
|
-------------
|
||
|
|
|
||
|
|
- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
|
||
|
|
video-interfaces.txt. If present it should be <1> - the device
|
||
|
|
supports only one data lane without re-mapping.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
s5k5bafx@2d {
|
||
|
|
compatible = "samsung,s5k5baf";
|
||
|
|
reg = <0x2d>;
|
||
|
|
vdda-supply = <&cam_io_en_reg>;
|
||
|
|
vddreg-supply = <&vt_core_15v_reg>;
|
||
|
|
vddio-supply = <&vtcam_reg>;
|
||
|
|
stbyn-gpios = <&gpl2 0 1>;
|
||
|
|
rstn-gpios = <&gpl2 1 1>;
|
||
|
|
clock-names = "mclk";
|
||
|
|
clocks = <&clock_cam 0>;
|
||
|
|
clock-frequency = <24000000>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
s5k5bafx_ep: endpoint {
|
||
|
|
remote-endpoint = <&csis1_ep>;
|
||
|
|
data-lanes = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|