License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2005-04-17 06:20:36 +08:00
|
|
|
#ifndef _LINUX_ELF_H
|
|
|
|
|
#define _LINUX_ELF_H
|
|
|
|
|
|
2020-03-17 00:50:43 +08:00
|
|
|
#include <linux/types.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <asm/elf.h>
|
2012-10-13 17:46:48 +08:00
|
|
|
#include <uapi/linux/elf.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2011-12-12 21:54:36 +08:00
|
|
|
#ifndef elf_read_implies_exec
|
|
|
|
|
/* Executables for which elf_read_implies_exec() returns TRUE will
|
|
|
|
|
have the READ_IMPLIES_EXEC personality flag set automatically.
|
|
|
|
|
Override in asm/elf.h as needed. */
|
|
|
|
|
# define elf_read_implies_exec(ex, have_pt_gnu_stack) 0
|
|
|
|
|
#endif
|
2013-02-18 06:47:04 +08:00
|
|
|
#ifndef SET_PERSONALITY
|
|
|
|
|
#define SET_PERSONALITY(ex) \
|
|
|
|
|
set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
|
|
|
|
|
#endif
|
2011-12-12 21:54:36 +08:00
|
|
|
|
binfmt_elf: allow arch code to examine PT_LOPROC ... PT_HIPROC headers
MIPS is introducing new variants of its O32 ABI which differ in their
handling of floating point, in order to enable a gradual transition
towards a world where mips32 binaries can take advantage of new hardware
features only available when configured for certain FP modes. In order
to do this ELF binaries are being augmented with a new section that
indicates, amongst other things, the FP mode requirements of the binary.
The presence & location of such a section is indicated by a program
header in the PT_LOPROC ... PT_HIPROC range.
In order to allow the MIPS architecture code to examine the program
header & section in question, pass all program headers in this range
to an architecture-specific arch_elf_pt_proc function. This function
may return an error if the header is deemed invalid or unsuitable for
the system, in which case that error will be returned from
load_elf_binary and upwards through the execve syscall.
A means is required for the architecture code to make a decision once
it is known that all such headers have been seen, but before it is too
late to return from an execve syscall. For this purpose the
arch_check_elf function is added, and called once, after all PT_LOPROC
to PT_HIPROC headers have been passed to arch_elf_pt_proc but before
the code which invoked execve has been lost. This enables the
architecture code to make a decision based upon all the headers present
in an ELF binary and its interpreter, as is required to forbid
conflicting FP ABI requirements between an ELF & its interpreter.
In order to allow data to be stored throughout the calls to the above
functions, struct arch_elf_state is introduced.
Finally a variant of the SET_PERSONALITY macro is introduced which
accepts a pointer to the struct arch_elf_state, allowing it to act
based upon state observed from the architecture specific program
headers.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7679/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-11 15:30:16 +08:00
|
|
|
#ifndef SET_PERSONALITY2
|
|
|
|
|
#define SET_PERSONALITY2(ex, state) \
|
|
|
|
|
SET_PERSONALITY(ex)
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-03-17 00:50:44 +08:00
|
|
|
#define ELF32_GNU_PROPERTY_ALIGN 4
|
|
|
|
|
#define ELF64_GNU_PROPERTY_ALIGN 8
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#if ELF_CLASS == ELFCLASS32
|
|
|
|
|
|
|
|
|
|
extern Elf32_Dyn _DYNAMIC [];
|
|
|
|
|
#define elfhdr elf32_hdr
|
|
|
|
|
#define elf_phdr elf32_phdr
|
2010-03-06 05:44:10 +08:00
|
|
|
#define elf_shdr elf32_shdr
|
2005-04-17 06:20:36 +08:00
|
|
|
#define elf_note elf32_note
|
2006-12-07 12:37:53 +08:00
|
|
|
#define elf_addr_t Elf32_Off
|
2010-03-06 05:44:07 +08:00
|
|
|
#define Elf_Half Elf32_Half
|
2017-05-09 06:56:21 +08:00
|
|
|
#define Elf_Word Elf32_Word
|
2020-03-17 00:50:44 +08:00
|
|
|
#define ELF_GNU_PROPERTY_ALIGN ELF32_GNU_PROPERTY_ALIGN
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
extern Elf64_Dyn _DYNAMIC [];
|
|
|
|
|
#define elfhdr elf64_hdr
|
|
|
|
|
#define elf_phdr elf64_phdr
|
2010-03-06 05:44:10 +08:00
|
|
|
#define elf_shdr elf64_shdr
|
2005-04-17 06:20:36 +08:00
|
|
|
#define elf_note elf64_note
|
2006-12-07 12:37:53 +08:00
|
|
|
#define elf_addr_t Elf64_Off
|
2010-03-06 05:44:07 +08:00
|
|
|
#define Elf_Half Elf64_Half
|
2017-05-09 06:56:21 +08:00
|
|
|
#define Elf_Word Elf64_Word
|
2020-03-17 00:50:44 +08:00
|
|
|
#define ELF_GNU_PROPERTY_ALIGN ELF64_GNU_PROPERTY_ALIGN
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
[POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.
Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.
Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.
Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.
We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works). So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.
It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 12:38:12 +08:00
|
|
|
/* Optional callbacks to write extra ELF notes. */
|
2011-12-12 21:54:36 +08:00
|
|
|
struct file;
|
2013-10-06 10:24:29 +08:00
|
|
|
struct coredump_params;
|
2011-12-12 21:54:36 +08:00
|
|
|
|
[POWERPC] coredump: Add SPU elf notes to coredump.
This patch adds SPU elf notes to the coredump. It creates a separate note
for each of /regs, /fpcr, /lslr, /decr, /decr_status, /mem, /signal1,
/signal1_type, /signal2, /signal2_type, /event_mask, /event_status,
/mbox_info, /ibox_info, /wbox_info, /dma_info, /proxydma_info, /object-id.
A new macro, ARCH_HAVE_EXTRA_NOTES, was created for architectures to
specify they have extra elf core notes.
A new macro, ELF_CORE_EXTRA_NOTES_SIZE, was created so the size of the
additional notes could be calculated and added to the notes phdr entry.
A new macro, ELF_CORE_WRITE_EXTRA_NOTES, was created so the new notes
would be written after the existing notes.
The SPU coredump code resides in spufs. Stub functions are provided in the
kernel which are hooked into the spufs code which does the actual work via
register_arch_coredump_calls().
A new set of __spufs_<file>_read/get() functions was provided to allow the
coredump code to read from the spufs files without having to lock the
SPU context for each file read from.
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Dwayne Grant McConnell <decimal@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 07:46:37 +08:00
|
|
|
#ifndef ARCH_HAVE_EXTRA_ELF_NOTES
|
[POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.
Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.
Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.
Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.
We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works). So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.
It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 12:38:12 +08:00
|
|
|
static inline int elf_coredump_extra_notes_size(void) { return 0; }
|
2013-10-06 10:24:29 +08:00
|
|
|
static inline int elf_coredump_extra_notes_write(struct coredump_params *cprm) { return 0; }
|
[POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.
Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.
Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.
Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.
We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works). So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.
It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 12:38:12 +08:00
|
|
|
#else
|
|
|
|
|
extern int elf_coredump_extra_notes_size(void);
|
2013-10-06 10:24:29 +08:00
|
|
|
extern int elf_coredump_extra_notes_write(struct coredump_params *cprm);
|
[POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.
Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.
Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.
Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.
We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works). So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.
It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 12:38:12 +08:00
|
|
|
#endif
|
2020-03-17 00:50:43 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NT_GNU_PROPERTY_TYPE_0 header:
|
|
|
|
|
* Keep this internal until/unless there is an agreed UAPI definition.
|
|
|
|
|
* pr_type values (GNU_PROPERTY_*) are public and defined in the UAPI header.
|
|
|
|
|
*/
|
|
|
|
|
struct gnu_property {
|
|
|
|
|
u32 pr_type;
|
|
|
|
|
u32 pr_datasz;
|
|
|
|
|
};
|
|
|
|
|
|
2020-03-17 00:50:44 +08:00
|
|
|
struct arch_elf_state;
|
|
|
|
|
|
|
|
|
|
#ifndef CONFIG_ARCH_USE_GNU_PROPERTY
|
|
|
|
|
static inline int arch_parse_elf_property(u32 type, const void *data,
|
|
|
|
|
size_t datasz, bool compat,
|
|
|
|
|
struct arch_elf_state *arch)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
#else
|
|
|
|
|
extern int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
|
|
|
|
|
bool compat, struct arch_elf_state *arch);
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-03-17 00:50:46 +08:00
|
|
|
#ifdef CONFIG_ARCH_HAVE_ELF_PROT
|
|
|
|
|
int arch_elf_adjust_prot(int prot, const struct arch_elf_state *state,
|
|
|
|
|
bool has_interp, bool is_interp);
|
|
|
|
|
#else
|
|
|
|
|
static inline int arch_elf_adjust_prot(int prot,
|
|
|
|
|
const struct arch_elf_state *state,
|
|
|
|
|
bool has_interp, bool is_interp)
|
|
|
|
|
{
|
|
|
|
|
return prot;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif /* _LINUX_ELF_H */
|
