2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
linux-next/drivers/md/md.c

6960 lines
177 KiB
C
Raw Normal View History

/*
md.c : Multiple Devices driver for Linux
Copyright (C) 1998, 1999, 2000 Ingo Molnar
completely rewritten, based on the MD driver code from Marc Zyngier
Changes:
- RAID-1/RAID-5 extensions by Miguel de Icaza, Gadi Oxman, Ingo Molnar
- RAID-6 extensions by H. Peter Anvin <hpa@zytor.com>
- boot support for linear and striped mode by Harald Hoyer <HarryH@Royal.Net>
- kerneld support by Boris Tobotras <boris@xtalk.msk.su>
- kmod support by: Cyrus Durgin
- RAID0 bugfixes: Mark Anthony Lisher <markal@iname.com>
- Devfs support by Richard Gooch <rgooch@atnf.csiro.au>
- lots of fixes and improvements to the RAID1/RAID5 and generic
RAID code (such as request based resynchronization):
Neil Brown <neilb@cse.unsw.edu.au>.
- persistent bitmap code
Copyright (C) 2003-2004, Paul Clements, SteelEye Technology, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
You should have received a copy of the GNU General Public License
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kthread.h>
#include <linux/blkdev.h>
#include <linux/sysctl.h>
#include <linux/seq_file.h>
#include <linux/buffer_head.h> /* for invalidate_bdev */
#include <linux/poll.h>
#include <linux/ctype.h>
#include <linux/hdreg.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
#include <linux/reboot.h>
#include <linux/file.h>
#include <linux/delay.h>
#include <linux/raid/md_p.h>
#include <linux/raid/md_u.h>
#include "md.h"
#include "bitmap.h"
#define DEBUG 0
#define dprintk(x...) ((void)(DEBUG && printk(x)))
#ifndef MODULE
static void autostart_arrays(int part);
#endif
static LIST_HEAD(pers_list);
static DEFINE_SPINLOCK(pers_lock);
static void md_print_devices(void);
static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
/*
* Current RAID-1,4,5 parallel reconstruction 'guaranteed speed limit'
* is 1000 KB/sec, so the extra system load does not show up that much.
* Increase it if you want to have more _guaranteed_ speed. Note that
* the RAID driver will use the maximum available bandwidth if the IO
* subsystem is idle. There is also an 'absolute maximum' reconstruction
* speed limit - in case reconstruction slows down your system despite
* idle IO detection.
*
* you can change it via /proc/sys/dev/raid/speed_limit_min and _max.
* or /sys/block/mdX/md/sync_speed_{min,max}
*/
static int sysctl_speed_limit_min = 1000;
static int sysctl_speed_limit_max = 200000;
static inline int speed_min(mddev_t *mddev)
{
return mddev->sync_speed_min ?
mddev->sync_speed_min : sysctl_speed_limit_min;
}
static inline int speed_max(mddev_t *mddev)
{
return mddev->sync_speed_max ?
mddev->sync_speed_max : sysctl_speed_limit_max;
}
static struct ctl_table_header *raid_table_header;
static ctl_table raid_table[] = {
{
.ctl_name = DEV_RAID_SPEED_LIMIT_MIN,
.procname = "speed_limit_min",
.data = &sysctl_speed_limit_min,
.maxlen = sizeof(int),
.mode = S_IRUGO|S_IWUSR,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = DEV_RAID_SPEED_LIMIT_MAX,
.procname = "speed_limit_max",
.data = &sysctl_speed_limit_max,
.maxlen = sizeof(int),
.mode = S_IRUGO|S_IWUSR,
.proc_handler = &proc_dointvec,
},
{ .ctl_name = 0 }
};
static ctl_table raid_dir_table[] = {
{
.ctl_name = DEV_RAID,
.procname = "raid",
.maxlen = 0,
.mode = S_IRUGO|S_IXUGO,
.child = raid_table,
},
{ .ctl_name = 0 }
};
static ctl_table raid_root_table[] = {
{
.ctl_name = CTL_DEV,
.procname = "dev",
.maxlen = 0,
.mode = 0555,
.child = raid_dir_table,
},
{ .ctl_name = 0 }
};
static struct block_device_operations md_fops;
static int start_readonly;
/*
* We have a system wide 'event count' that is incremented
* on any 'interesting' event, and readers of /proc/mdstat
* can use 'poll' or 'select' to find out when the event
* count increases.
*
* Events are:
* start array, stop array, error, add device, remove device,
* start build, activate spare
*/
static DECLARE_WAIT_QUEUE_HEAD(md_event_waiters);
static atomic_t md_event_count;
void md_new_event(mddev_t *mddev)
{
atomic_inc(&md_event_count);
wake_up(&md_event_waiters);
}
EXPORT_SYMBOL_GPL(md_new_event);
/* Alternate version that can be called from interrupts
* when calling sysfs_notify isn't needed.
*/
static void md_new_event_inintr(mddev_t *mddev)
{
atomic_inc(&md_event_count);
wake_up(&md_event_waiters);
}
/*
* Enables to iterate over all existing md arrays
* all_mddevs_lock protects this list.
*/
static LIST_HEAD(all_mddevs);
static DEFINE_SPINLOCK(all_mddevs_lock);
/*
* iterates through all used mddevs in the system.
* We take care to grab the all_mddevs_lock whenever navigating
* the list, and to always hold a refcount when unlocked.
* Any code which breaks out of this loop while own
* a reference to the current mddev and must mddev_put it.
*/
#define for_each_mddev(mddev,tmp) \
\
for (({ spin_lock(&all_mddevs_lock); \
tmp = all_mddevs.next; \
mddev = NULL;}); \
({ if (tmp != &all_mddevs) \
mddev_get(list_entry(tmp, mddev_t, all_mddevs));\
spin_unlock(&all_mddevs_lock); \
if (mddev) mddev_put(mddev); \
mddev = list_entry(tmp, mddev_t, all_mddevs); \
tmp != &all_mddevs;}); \
({ spin_lock(&all_mddevs_lock); \
tmp = tmp->next;}) \
)
/* Rather than calling directly into the personality make_request function,
* IO requests come here first so that we can check if the device is
* being suspended pending a reconfiguration.
* We hold a refcount over the call to ->make_request. By the time that
* call has finished, the bio has been linked into some internal structure
* and so is visible to ->quiesce(), so we don't need the refcount any more.
*/
static int md_make_request(struct request_queue *q, struct bio *bio)
{
mddev_t *mddev = q->queuedata;
int rv;
if (mddev == NULL || mddev->pers == NULL) {
bio_io_error(bio);
return 0;
}
rcu_read_lock();
if (mddev->suspended) {
DEFINE_WAIT(__wait);
for (;;) {
prepare_to_wait(&mddev->sb_wait, &__wait,
TASK_UNINTERRUPTIBLE);
if (!mddev->suspended)
break;
rcu_read_unlock();
schedule();
rcu_read_lock();
}
finish_wait(&mddev->sb_wait, &__wait);
}
atomic_inc(&mddev->active_io);
rcu_read_unlock();
rv = mddev->pers->make_request(q, bio);
if (atomic_dec_and_test(&mddev->active_io) && mddev->suspended)
wake_up(&mddev->sb_wait);
return rv;
}
static void mddev_suspend(mddev_t *mddev)
{
BUG_ON(mddev->suspended);
mddev->suspended = 1;
synchronize_rcu();
wait_event(mddev->sb_wait, atomic_read(&mddev->active_io) == 0);
mddev->pers->quiesce(mddev, 1);
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
/* we now know that no code is executing in the personality module,
* except possibly the tail end of a ->bi_end_io function, but that
* is certain to complete before the module has a chance to get
* unloaded
*/
}
static void mddev_resume(mddev_t *mddev)
{
mddev->suspended = 0;
wake_up(&mddev->sb_wait);
mddev->pers->quiesce(mddev, 0);
}
static inline mddev_t *mddev_get(mddev_t *mddev)
{
atomic_inc(&mddev->active);
return mddev;
}
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 15:57:25 +08:00
static void mddev_delayed_delete(struct work_struct *ws);
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
static void mddev_put(mddev_t *mddev)
{
if (!atomic_dec_and_lock(&mddev->active, &all_mddevs_lock))
return;
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
if (!mddev->raid_disks && list_empty(&mddev->disks) &&
!mddev->hold_active) {
list_del(&mddev->all_mddevs);
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
if (mddev->gendisk) {
/* we did a probe so need to clean up.
* Call schedule_work inside the spinlock
* so that flush_scheduled_work() after
* mddev_find will succeed in waiting for the
* work to be done.
*/
INIT_WORK(&mddev->del_work, mddev_delayed_delete);
schedule_work(&mddev->del_work);
} else
kfree(mddev);
}
spin_unlock(&all_mddevs_lock);
}
static mddev_t * mddev_find(dev_t unit)
{
mddev_t *mddev, *new = NULL;
retry:
spin_lock(&all_mddevs_lock);
if (unit) {
list_for_each_entry(mddev, &all_mddevs, all_mddevs)
if (mddev->unit == unit) {
mddev_get(mddev);
spin_unlock(&all_mddevs_lock);
kfree(new);
return mddev;
}
if (new) {
list_add(&new->all_mddevs, &all_mddevs);
spin_unlock(&all_mddevs_lock);
new->hold_active = UNTIL_IOCTL;
return new;
}
} else if (new) {
/* find an unused unit number */
static int next_minor = 512;
int start = next_minor;
int is_free = 0;
int dev = 0;
while (!is_free) {
dev = MKDEV(MD_MAJOR, next_minor);
next_minor++;
if (next_minor > MINORMASK)
next_minor = 0;
if (next_minor == start) {
/* Oh dear, all in use. */
spin_unlock(&all_mddevs_lock);
kfree(new);
return NULL;
}
is_free = 1;
list_for_each_entry(mddev, &all_mddevs, all_mddevs)
if (mddev->unit == dev) {
is_free = 0;
break;
}
}
new->unit = dev;
new->md_minor = MINOR(dev);
new->hold_active = UNTIL_STOP;
list_add(&new->all_mddevs, &all_mddevs);
spin_unlock(&all_mddevs_lock);
return new;
}
spin_unlock(&all_mddevs_lock);
new = kzalloc(sizeof(*new), GFP_KERNEL);
if (!new)
return NULL;
new->unit = unit;
if (MAJOR(unit) == MD_MAJOR)
new->md_minor = MINOR(unit);
else
new->md_minor = MINOR(unit) >> MdpMinorShift;
mutex_init(&new->reconfig_mutex);
INIT_LIST_HEAD(&new->disks);
INIT_LIST_HEAD(&new->all_mddevs);
init_timer(&new->safemode_timer);
atomic_set(&new->active, 1);
atomic_set(&new->openers, 0);
atomic_set(&new->active_io, 0);
spin_lock_init(&new->write_lock);
init_waitqueue_head(&new->sb_wait);
init_waitqueue_head(&new->recovery_wait);
new->reshape_position = MaxSector;
new->resync_min = 0;
new->resync_max = MaxSector;
new->level = LEVEL_NONE;
goto retry;
}
static inline int mddev_lock(mddev_t * mddev)
{
return mutex_lock_interruptible(&mddev->reconfig_mutex);
}
static inline int mddev_is_locked(mddev_t *mddev)
{
return mutex_is_locked(&mddev->reconfig_mutex);
}
static inline int mddev_trylock(mddev_t * mddev)
{
return mutex_trylock(&mddev->reconfig_mutex);
}
static inline void mddev_unlock(mddev_t * mddev)
{
mutex_unlock(&mddev->reconfig_mutex);
md_wakeup_thread(mddev->thread);
}
static mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
{
mdk_rdev_t *rdev;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->desc_nr == nr)
return rdev;
return NULL;
}
static mdk_rdev_t * find_rdev(mddev_t * mddev, dev_t dev)
{
mdk_rdev_t *rdev;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->bdev->bd_dev == dev)
return rdev;
return NULL;
}
static struct mdk_personality *find_pers(int level, char *clevel)
{
struct mdk_personality *pers;
list_for_each_entry(pers, &pers_list, list) {
if (level != LEVEL_NONE && pers->level == level)
return pers;
if (strcmp(pers->name, clevel)==0)
return pers;
}
return NULL;
}
/* return the offset of the super block in 512byte sectors */
static inline sector_t calc_dev_sboffset(struct block_device *bdev)
{
sector_t num_sectors = bdev->bd_inode->i_size / 512;
return MD_NEW_SIZE_SECTORS(num_sectors);
}
static sector_t calc_num_sectors(mdk_rdev_t *rdev, unsigned chunk_size)
{
sector_t num_sectors = rdev->sb_start;
if (chunk_size)
num_sectors &= ~((sector_t)chunk_size/512 - 1);
return num_sectors;
}
static int alloc_disk_sb(mdk_rdev_t * rdev)
{
if (rdev->sb_page)
MD_BUG();
rdev->sb_page = alloc_page(GFP_KERNEL);
if (!rdev->sb_page) {
printk(KERN_ALERT "md: out of memory.\n");
return -ENOMEM;
}
return 0;
}
static void free_disk_sb(mdk_rdev_t * rdev)
{
if (rdev->sb_page) {
put_page(rdev->sb_page);
rdev->sb_loaded = 0;
rdev->sb_page = NULL;
rdev->sb_start = 0;
rdev->sectors = 0;
}
}
static void super_written(struct bio *bio, int error)
{
mdk_rdev_t *rdev = bio->bi_private;
2005-11-09 13:39:34 +08:00
mddev_t *mddev = rdev->mddev;
if (error || !test_bit(BIO_UPTODATE, &bio->bi_flags)) {
printk("md: super_written gets error=%d, uptodate=%d\n",
error, test_bit(BIO_UPTODATE, &bio->bi_flags));
WARN_ON(test_bit(BIO_UPTODATE, &bio->bi_flags));
2005-11-09 13:39:34 +08:00
md_error(mddev, rdev);
}
2005-11-09 13:39:34 +08:00
if (atomic_dec_and_test(&mddev->pending_writes))
wake_up(&mddev->sb_wait);
bio_put(bio);
}
static void super_written_barrier(struct bio *bio, int error)
2005-11-09 13:39:34 +08:00
{
struct bio *bio2 = bio->bi_private;
mdk_rdev_t *rdev = bio2->bi_private;
mddev_t *mddev = rdev->mddev;
if (!test_bit(BIO_UPTODATE, &bio->bi_flags) &&
error == -EOPNOTSUPP) {
unsigned long flags;
/* barriers don't appear to be supported :-( */
set_bit(BarriersNotsupp, &rdev->flags);
mddev->barriers_work = 0;
spin_lock_irqsave(&mddev->write_lock, flags);
bio2->bi_next = mddev->biolist;
mddev->biolist = bio2;
spin_unlock_irqrestore(&mddev->write_lock, flags);
wake_up(&mddev->sb_wait);
bio_put(bio);
} else {
bio_put(bio2);
bio->bi_private = rdev;
super_written(bio, error);
2005-11-09 13:39:34 +08:00
}
}
void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
sector_t sector, int size, struct page *page)
{
/* write first size bytes of page to sector of rdev
* Increment mddev->pending_writes before returning
* and decrement it on completion, waking up sb_wait
* if zero is reached.
* If an error occurred, call md_error
2005-11-09 13:39:34 +08:00
*
* As we might need to resubmit the request if BIO_RW_BARRIER
* causes ENOTSUPP, we allocate a spare bio...
*/
struct bio *bio = bio_alloc(GFP_NOIO, 1);
int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
bio->bi_bdev = rdev->bdev;
bio->bi_sector = sector;
bio_add_page(bio, page, size, 0);
bio->bi_private = rdev;
bio->bi_end_io = super_written;
2005-11-09 13:39:34 +08:00
bio->bi_rw = rw;
atomic_inc(&mddev->pending_writes);
2005-11-09 13:39:34 +08:00
if (!test_bit(BarriersNotsupp, &rdev->flags)) {
struct bio *rbio;
rw |= (1<<BIO_RW_BARRIER);
rbio = bio_clone(bio, GFP_NOIO);
rbio->bi_private = bio;
rbio->bi_end_io = super_written_barrier;
submit_bio(rw, rbio);
} else
submit_bio(rw, bio);
}
void md_super_wait(mddev_t *mddev)
{
/* wait for all superblock writes that were scheduled to complete.
* if any had to be retried (due to BARRIER problems), retry them
*/
DEFINE_WAIT(wq);
for(;;) {
prepare_to_wait(&mddev->sb_wait, &wq, TASK_UNINTERRUPTIBLE);
if (atomic_read(&mddev->pending_writes)==0)
break;
while (mddev->biolist) {
struct bio *bio;
spin_lock_irq(&mddev->write_lock);
bio = mddev->biolist;
mddev->biolist = bio->bi_next ;
bio->bi_next = NULL;
spin_unlock_irq(&mddev->write_lock);
submit_bio(bio->bi_rw, bio);
}
schedule();
}
finish_wait(&mddev->sb_wait, &wq);
}
static void bi_complete(struct bio *bio, int error)
{
complete((struct completion*)bio->bi_private);
}
int sync_page_io(struct block_device *bdev, sector_t sector, int size,
struct page *page, int rw)
{
struct bio *bio = bio_alloc(GFP_NOIO, 1);
struct completion event;
int ret;
rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
bio->bi_bdev = bdev;
bio->bi_sector = sector;
bio_add_page(bio, page, size, 0);
init_completion(&event);
bio->bi_private = &event;
bio->bi_end_io = bi_complete;
submit_bio(rw, bio);
wait_for_completion(&event);
ret = test_bit(BIO_UPTODATE, &bio->bi_flags);
bio_put(bio);
return ret;
}
EXPORT_SYMBOL_GPL(sync_page_io);
static int read_disk_sb(mdk_rdev_t * rdev, int size)
{
char b[BDEVNAME_SIZE];
if (!rdev->sb_page) {
MD_BUG();
return -EINVAL;
}
if (rdev->sb_loaded)
return 0;
if (!sync_page_io(rdev->bdev, rdev->sb_start, size, rdev->sb_page, READ))
goto fail;
rdev->sb_loaded = 1;
return 0;
fail:
printk(KERN_WARNING "md: disabled device %s, could not read superblock.\n",
bdevname(rdev->bdev,b));
return -EINVAL;
}
static int uuid_equal(mdp_super_t *sb1, mdp_super_t *sb2)
{
return sb1->set_uuid0 == sb2->set_uuid0 &&
sb1->set_uuid1 == sb2->set_uuid1 &&
sb1->set_uuid2 == sb2->set_uuid2 &&
sb1->set_uuid3 == sb2->set_uuid3;
}
static int sb_equal(mdp_super_t *sb1, mdp_super_t *sb2)
{
int ret;
mdp_super_t *tmp1, *tmp2;
tmp1 = kmalloc(sizeof(*tmp1),GFP_KERNEL);
tmp2 = kmalloc(sizeof(*tmp2),GFP_KERNEL);
if (!tmp1 || !tmp2) {
ret = 0;
printk(KERN_INFO "md.c sb_equal(): failed to allocate memory!\n");
goto abort;
}
*tmp1 = *sb1;
*tmp2 = *sb2;
/*
* nr_disks is not constant
*/
tmp1->nr_disks = 0;
tmp2->nr_disks = 0;
ret = (memcmp(tmp1, tmp2, MD_SB_GENERIC_CONSTANT_WORDS * 4) == 0);
abort:
kfree(tmp1);
kfree(tmp2);
return ret;
}
static u32 md_csum_fold(u32 csum)
{
csum = (csum & 0xffff) + (csum >> 16);
return (csum & 0xffff) + (csum >> 16);
}
static unsigned int calc_sb_csum(mdp_super_t * sb)
{
u64 newcsum = 0;
u32 *sb32 = (u32*)sb;
int i;
unsigned int disk_csum, csum;
disk_csum = sb->sb_csum;
sb->sb_csum = 0;
for (i = 0; i < MD_SB_BYTES/4 ; i++)
newcsum += sb32[i];
csum = (newcsum & 0xffffffff) + (newcsum>>32);
#ifdef CONFIG_ALPHA
/* This used to use csum_partial, which was wrong for several
* reasons including that different results are returned on
* different architectures. It isn't critical that we get exactly
* the same return value as before (we always csum_fold before
* testing, and that removes any differences). However as we
* know that csum_partial always returned a 16bit value on
* alphas, do a fold to maximise conformity to previous behaviour.
*/
sb->sb_csum = md_csum_fold(disk_csum);
#else
sb->sb_csum = disk_csum;
#endif
return csum;
}
/*
* Handle superblock details.
* We want to be able to handle multiple superblock formats
* so we have a common interface to them all, and an array of
* different handlers.
* We rely on user-space to write the initial superblock, and support
* reading and updating of superblocks.
* Interface methods are:
* int load_super(mdk_rdev_t *dev, mdk_rdev_t *refdev, int minor_version)
* loads and validates a superblock on dev.
* if refdev != NULL, compare superblocks on both devices
* Return:
* 0 - dev has a superblock that is compatible with refdev
* 1 - dev has a superblock that is compatible and newer than refdev
* so dev should be used as the refdev in future
* -EINVAL superblock incompatible or invalid
* -othererror e.g. -EIO
*
* int validate_super(mddev_t *mddev, mdk_rdev_t *dev)
* Verify that dev is acceptable into mddev.
* The first time, mddev->raid_disks will be 0, and data from
* dev should be merged in. Subsequent calls check that dev
* is new enough. Return 0 or -EINVAL
*
* void sync_super(mddev_t *mddev, mdk_rdev_t *dev)
* Update the superblock for rdev with data in mddev
* This does not write to disc.
*
*/
struct super_type {
char *name;
struct module *owner;
int (*load_super)(mdk_rdev_t *rdev, mdk_rdev_t *refdev,
int minor_version);
int (*validate_super)(mddev_t *mddev, mdk_rdev_t *rdev);
void (*sync_super)(mddev_t *mddev, mdk_rdev_t *rdev);
unsigned long long (*rdev_size_change)(mdk_rdev_t *rdev,
sector_t num_sectors);
};
/*
* load_super for 0.90.0
*/
static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
{
char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE];
mdp_super_t *sb;
int ret;
/*
* Calculate the position of the superblock (512byte sectors),
* it's at the end of the disk.
*
* It also happens to be a multiple of 4Kb.
*/
rdev->sb_start = calc_dev_sboffset(rdev->bdev);
ret = read_disk_sb(rdev, MD_SB_BYTES);
if (ret) return ret;
ret = -EINVAL;
bdevname(rdev->bdev, b);
sb = (mdp_super_t*)page_address(rdev->sb_page);
if (sb->md_magic != MD_SB_MAGIC) {
printk(KERN_ERR "md: invalid raid superblock magic on %s\n",
b);
goto abort;
}
if (sb->major_version != 0 ||
sb->minor_version < 90 ||
sb->minor_version > 91) {
printk(KERN_WARNING "Bad version number %d.%d on %s\n",
sb->major_version, sb->minor_version,
b);
goto abort;
}
if (sb->raid_disks <= 0)
goto abort;
if (md_csum_fold(calc_sb_csum(sb)) != md_csum_fold(sb->sb_csum)) {
printk(KERN_WARNING "md: invalid superblock checksum on %s\n",
b);
goto abort;
}
rdev->preferred_minor = sb->md_minor;
rdev->data_offset = 0;
rdev->sb_size = MD_SB_BYTES;
if (sb->state & (1<<MD_SB_BITMAP_PRESENT)) {
if (sb->level != 1 && sb->level != 4
&& sb->level != 5 && sb->level != 6
&& sb->level != 10) {
/* FIXME use a better test */
printk(KERN_WARNING
"md: bitmaps not supported for this level.\n");
goto abort;
}
}
if (sb->level == LEVEL_MULTIPATH)
rdev->desc_nr = -1;
else
rdev->desc_nr = sb->this_disk.number;
if (!refdev) {
ret = 1;
} else {
__u64 ev1, ev2;
mdp_super_t *refsb = (mdp_super_t*)page_address(refdev->sb_page);
if (!uuid_equal(refsb, sb)) {
printk(KERN_WARNING "md: %s has different UUID to %s\n",
b, bdevname(refdev->bdev,b2));
goto abort;
}
if (!sb_equal(refsb, sb)) {
printk(KERN_WARNING "md: %s has same UUID"
" but different superblock to %s\n",
b, bdevname(refdev->bdev, b2));
goto abort;
}
ev1 = md_event(sb);
ev2 = md_event(refsb);
if (ev1 > ev2)
ret = 1;
else
ret = 0;
}
rdev->sectors = calc_num_sectors(rdev, sb->chunk_size);
if (rdev->sectors < sb->size * 2 && sb->level > 1)
/* "this cannot possibly happen" ... */
ret = -EINVAL;
abort:
return ret;
}
/*
* validate_super for 0.90.0
*/
static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
{
mdp_disk_t *desc;
mdp_super_t *sb = (mdp_super_t *)page_address(rdev->sb_page);
__u64 ev1 = md_event(sb);
rdev->raid_disk = -1;
clear_bit(Faulty, &rdev->flags);
clear_bit(In_sync, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
clear_bit(BarriersNotsupp, &rdev->flags);
if (mddev->raid_disks == 0) {
mddev->major_version = 0;
mddev->minor_version = sb->minor_version;
mddev->patch_version = sb->patch_version;
mddev->external = 0;
mddev->chunk_size = sb->chunk_size;
mddev->ctime = sb->ctime;
mddev->utime = sb->utime;
mddev->level = sb->level;
mddev->clevel[0] = 0;
mddev->layout = sb->layout;
mddev->raid_disks = sb->raid_disks;
mddev->dev_sectors = sb->size * 2;
mddev->events = ev1;
mddev->bitmap_offset = 0;
mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
if (mddev->minor_version >= 91) {
mddev->reshape_position = sb->reshape_position;
mddev->delta_disks = sb->delta_disks;
mddev->new_level = sb->new_level;
mddev->new_layout = sb->new_layout;
mddev->new_chunk = sb->new_chunk;
} else {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk = mddev->chunk_size;
}
if (sb->state & (1<<MD_SB_CLEAN))
mddev->recovery_cp = MaxSector;
else {
if (sb->events_hi == sb->cp_events_hi &&
sb->events_lo == sb->cp_events_lo) {
mddev->recovery_cp = sb->recovery_cp;
} else
mddev->recovery_cp = 0;
}
memcpy(mddev->uuid+0, &sb->set_uuid0, 4);
memcpy(mddev->uuid+4, &sb->set_uuid1, 4);
memcpy(mddev->uuid+8, &sb->set_uuid2, 4);
memcpy(mddev->uuid+12,&sb->set_uuid3, 4);
mddev->max_disks = MD_SB_DISKS;
if (sb->state & (1<<MD_SB_BITMAP_PRESENT) &&
mddev->bitmap_file == NULL)
mddev->bitmap_offset = mddev->default_bitmap_offset;
} else if (mddev->pers == NULL) {
/* Insist on good event counter while assembling */
++ev1;
if (ev1 < mddev->events)
return -EINVAL;
} else if (mddev->bitmap) {
/* if adding to array with a bitmap, then we can accept an
* older device ... but not too old.
*/
if (ev1 < mddev->bitmap->events_cleared)
return 0;
} else {
if (ev1 < mddev->events)
/* just a hot-add of a new device, leave raid_disk at -1 */
return 0;
}
if (mddev->level != LEVEL_MULTIPATH) {
desc = sb->disks + rdev->desc_nr;
if (desc->state & (1<<MD_DISK_FAULTY))
set_bit(Faulty, &rdev->flags);
else if (desc->state & (1<<MD_DISK_SYNC) /* &&
desc->raid_disk < mddev->raid_disks */) {
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = desc->raid_disk;
}
if (desc->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
} else /* MULTIPATH are always insync */
set_bit(In_sync, &rdev->flags);
return 0;
}
/*
* sync_super for 0.90.0
*/
static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev)
{
mdp_super_t *sb;
mdk_rdev_t *rdev2;
int next_spare = mddev->raid_disks;
/* make rdev->sb match mddev data..
*
* 1/ zero out disks
* 2/ Add info for each disk, keeping track of highest desc_nr (next_spare);
* 3/ any empty disks < next_spare become removed
*
* disks[0] gets initialised to REMOVED because
* we cannot be sure from other fields if it has
* been initialised or not.
*/
int i;
int active=0, working=0,failed=0,spare=0,nr_disks=0;
rdev->sb_size = MD_SB_BYTES;
sb = (mdp_super_t*)page_address(rdev->sb_page);
memset(sb, 0, sizeof(*sb));
sb->md_magic = MD_SB_MAGIC;
sb->major_version = mddev->major_version;
sb->patch_version = mddev->patch_version;
sb->gvalid_words = 0; /* ignored */
memcpy(&sb->set_uuid0, mddev->uuid+0, 4);
memcpy(&sb->set_uuid1, mddev->uuid+4, 4);
memcpy(&sb->set_uuid2, mddev->uuid+8, 4);
memcpy(&sb->set_uuid3, mddev->uuid+12,4);
sb->ctime = mddev->ctime;
sb->level = mddev->level;
sb->size = mddev->dev_sectors / 2;
sb->raid_disks = mddev->raid_disks;
sb->md_minor = mddev->md_minor;
sb->not_persistent = 0;
sb->utime = mddev->utime;
sb->state = 0;
sb->events_hi = (mddev->events>>32);
sb->events_lo = (u32)mddev->events;
if (mddev->reshape_position == MaxSector)
sb->minor_version = 90;
else {
sb->minor_version = 91;
sb->reshape_position = mddev->reshape_position;
sb->new_level = mddev->new_level;
sb->delta_disks = mddev->delta_disks;
sb->new_layout = mddev->new_layout;
sb->new_chunk = mddev->new_chunk;
}
mddev->minor_version = sb->minor_version;
if (mddev->in_sync)
{
sb->recovery_cp = mddev->recovery_cp;
sb->cp_events_hi = (mddev->events>>32);
sb->cp_events_lo = (u32)mddev->events;
if (mddev->recovery_cp == MaxSector)
sb->state = (1<< MD_SB_CLEAN);
} else
sb->recovery_cp = 0;
sb->layout = mddev->layout;
sb->chunk_size = mddev->chunk_size;
if (mddev->bitmap && mddev->bitmap_file == NULL)
sb->state |= (1<<MD_SB_BITMAP_PRESENT);
sb->disks[0].state = (1<<MD_DISK_REMOVED);
list_for_each_entry(rdev2, &mddev->disks, same_set) {
mdp_disk_t *d;
int desc_nr;
if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
&& !test_bit(Faulty, &rdev2->flags))
desc_nr = rdev2->raid_disk;
else
desc_nr = next_spare++;
rdev2->desc_nr = desc_nr;
d = &sb->disks[rdev2->desc_nr];
nr_disks++;
d->number = rdev2->desc_nr;
d->major = MAJOR(rdev2->bdev->bd_dev);
d->minor = MINOR(rdev2->bdev->bd_dev);
if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
&& !test_bit(Faulty, &rdev2->flags))
d->raid_disk = rdev2->raid_disk;
else
d->raid_disk = rdev2->desc_nr; /* compatibility */
if (test_bit(Faulty, &rdev2->flags))
d->state = (1<<MD_DISK_FAULTY);
else if (test_bit(In_sync, &rdev2->flags)) {
d->state = (1<<MD_DISK_ACTIVE);
d->state |= (1<<MD_DISK_SYNC);
active++;
working++;
} else {
d->state = 0;
spare++;
working++;
}
if (test_bit(WriteMostly, &rdev2->flags))
d->state |= (1<<MD_DISK_WRITEMOSTLY);
}
/* now set the "removed" and "faulty" bits on any missing devices */
for (i=0 ; i < mddev->raid_disks ; i++) {
mdp_disk_t *d = &sb->disks[i];
if (d->state == 0 && d->number == 0) {
d->number = i;
d->raid_disk = i;
d->state = (1<<MD_DISK_REMOVED);
d->state |= (1<<MD_DISK_FAULTY);
failed++;
}
}
sb->nr_disks = nr_disks;
sb->active_disks = active;
sb->working_disks = working;
sb->failed_disks = failed;
sb->spare_disks = spare;
sb->this_disk = sb->disks[rdev->desc_nr];
sb->sb_csum = calc_sb_csum(sb);
}
/*
* rdev_size_change for 0.90.0
*/
static unsigned long long
super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
{
if (num_sectors && num_sectors < rdev->mddev->dev_sectors)
return 0; /* component must fit device */
if (rdev->mddev->bitmap_offset)
return 0; /* can't move bitmap */
rdev->sb_start = calc_dev_sboffset(rdev->bdev);
if (!num_sectors || num_sectors > rdev->sb_start)
num_sectors = rdev->sb_start;
md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
rdev->sb_page);
md_super_wait(rdev->mddev);
return num_sectors / 2; /* kB for sysfs */
}
/*
* version 1 superblock
*/
static __le32 calc_sb_1_csum(struct mdp_superblock_1 * sb)
{
__le32 disk_csum;
u32 csum;
unsigned long long newcsum;
int size = 256 + le32_to_cpu(sb->max_dev)*2;
__le32 *isuper = (__le32*)sb;
int i;
disk_csum = sb->sb_csum;
sb->sb_csum = 0;
newcsum = 0;
for (i=0; size>=4; size -= 4 )
newcsum += le32_to_cpu(*isuper++);
if (size == 2)
newcsum += le16_to_cpu(*(__le16*) isuper);
csum = (newcsum & 0xffffffff) + (newcsum >> 32);
sb->sb_csum = disk_csum;
return cpu_to_le32(csum);
}
static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
{
struct mdp_superblock_1 *sb;
int ret;
sector_t sb_start;
char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE];
int bmask;
/*
* Calculate the position of the superblock in 512byte sectors.
* It is always aligned to a 4K boundary and
* depeding on minor_version, it can be:
* 0: At least 8K, but less than 12K, from end of device
* 1: At start of device
* 2: 4K from start of device.
*/
switch(minor_version) {
case 0:
sb_start = rdev->bdev->bd_inode->i_size >> 9;
sb_start -= 8*2;
sb_start &= ~(sector_t)(4*2-1);
break;
case 1:
sb_start = 0;
break;
case 2:
sb_start = 8;
break;
default:
return -EINVAL;
}
rdev->sb_start = sb_start;
/* superblock is rarely larger than 1K, but it can be larger,
* and it is safe to read 4k, so we do that
*/
ret = read_disk_sb(rdev, 4096);
if (ret) return ret;
sb = (struct mdp_superblock_1*)page_address(rdev->sb_page);
if (sb->magic != cpu_to_le32(MD_SB_MAGIC) ||
sb->major_version != cpu_to_le32(1) ||
le32_to_cpu(sb->max_dev) > (4096-256)/2 ||
le64_to_cpu(sb->super_offset) != rdev->sb_start ||
(le32_to_cpu(sb->feature_map) & ~MD_FEATURE_ALL) != 0)
return -EINVAL;
if (calc_sb_1_csum(sb) != sb->sb_csum) {
printk("md: invalid superblock checksum on %s\n",
bdevname(rdev->bdev,b));
return -EINVAL;
}
if (le64_to_cpu(sb->data_size) < 10) {
printk("md: data_size too small on %s\n",
bdevname(rdev->bdev,b));
return -EINVAL;
}
if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET)) {
if (sb->level != cpu_to_le32(1) &&
sb->level != cpu_to_le32(4) &&
sb->level != cpu_to_le32(5) &&
sb->level != cpu_to_le32(6) &&
sb->level != cpu_to_le32(10)) {
printk(KERN_WARNING
"md: bitmaps not supported for this level.\n");
return -EINVAL;
}
}
rdev->preferred_minor = 0xffff;
rdev->data_offset = le64_to_cpu(sb->data_offset);
atomic_set(&rdev->corrected_errors, le32_to_cpu(sb->cnt_corrected_read));
rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256;
bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1;
if (rdev->sb_size & bmask)
rdev->sb_size = (rdev->sb_size | bmask) + 1;
if (minor_version
&& rdev->data_offset < sb_start + (rdev->sb_size/512))
return -EINVAL;
if (sb->level == cpu_to_le32(LEVEL_MULTIPATH))
rdev->desc_nr = -1;
else
rdev->desc_nr = le32_to_cpu(sb->dev_number);
if (!refdev) {
ret = 1;
} else {
__u64 ev1, ev2;
struct mdp_superblock_1 *refsb =
(struct mdp_superblock_1*)page_address(refdev->sb_page);
if (memcmp(sb->set_uuid, refsb->set_uuid, 16) != 0 ||
sb->level != refsb->level ||
sb->layout != refsb->layout ||
sb->chunksize != refsb->chunksize) {
printk(KERN_WARNING "md: %s has strangely different"
" superblock to %s\n",
bdevname(rdev->bdev,b),
bdevname(refdev->bdev,b2));
return -EINVAL;
}
ev1 = le64_to_cpu(sb->events);
ev2 = le64_to_cpu(refsb->events);
if (ev1 > ev2)
ret = 1;
else
ret = 0;
}
if (minor_version)
rdev->sectors = (rdev->bdev->bd_inode->i_size >> 9) -
le64_to_cpu(sb->data_offset);
else
rdev->sectors = rdev->sb_start;
if (rdev->sectors < le64_to_cpu(sb->data_size))
return -EINVAL;
rdev->sectors = le64_to_cpu(sb->data_size);
if (le32_to_cpu(sb->chunksize))
rdev->sectors &= ~((sector_t)le32_to_cpu(sb->chunksize) - 1);
if (le64_to_cpu(sb->size) > rdev->sectors)
return -EINVAL;
return ret;
}
static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
{
struct mdp_superblock_1 *sb = (struct mdp_superblock_1*)page_address(rdev->sb_page);
__u64 ev1 = le64_to_cpu(sb->events);
rdev->raid_disk = -1;
clear_bit(Faulty, &rdev->flags);
clear_bit(In_sync, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
clear_bit(BarriersNotsupp, &rdev->flags);
if (mddev->raid_disks == 0) {
mddev->major_version = 1;
mddev->patch_version = 0;
mddev->external = 0;
mddev->chunk_size = le32_to_cpu(sb->chunksize) << 9;
mddev->ctime = le64_to_cpu(sb->ctime) & ((1ULL << 32)-1);
mddev->utime = le64_to_cpu(sb->utime) & ((1ULL << 32)-1);
mddev->level = le32_to_cpu(sb->level);
mddev->clevel[0] = 0;
mddev->layout = le32_to_cpu(sb->layout);
mddev->raid_disks = le32_to_cpu(sb->raid_disks);
mddev->dev_sectors = le64_to_cpu(sb->size);
mddev->events = ev1;
mddev->bitmap_offset = 0;
mddev->default_bitmap_offset = 1024 >> 9;
mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
memcpy(mddev->uuid, sb->set_uuid, 16);
mddev->max_disks = (4096-256)/2;
if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET) &&
mddev->bitmap_file == NULL )
mddev->bitmap_offset = (__s32)le32_to_cpu(sb->bitmap_offset);
if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
mddev->reshape_position = le64_to_cpu(sb->reshape_position);
mddev->delta_disks = le32_to_cpu(sb->delta_disks);
mddev->new_level = le32_to_cpu(sb->new_level);
mddev->new_layout = le32_to_cpu(sb->new_layout);
mddev->new_chunk = le32_to_cpu(sb->new_chunk)<<9;
} else {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk = mddev->chunk_size;
}
} else if (mddev->pers == NULL) {
/* Insist of good event counter while assembling */
++ev1;
if (ev1 < mddev->events)
return -EINVAL;
} else if (mddev->bitmap) {
/* If adding to array with a bitmap, then we can accept an
* older device, but not too old.
*/
if (ev1 < mddev->bitmap->events_cleared)
return 0;
} else {
if (ev1 < mddev->events)
/* just a hot-add of a new device, leave raid_disk at -1 */
return 0;
}
if (mddev->level != LEVEL_MULTIPATH) {
int role;
role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
switch(role) {
case 0xffff: /* spare */
break;
case 0xfffe: /* faulty */
set_bit(Faulty, &rdev->flags);
break;
default:
if ((le32_to_cpu(sb->feature_map) &
MD_FEATURE_RECOVERY_OFFSET))
rdev->recovery_offset = le64_to_cpu(sb->recovery_offset);
else
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = role;
break;
}
if (sb->devflags & WriteMostly1)
set_bit(WriteMostly, &rdev->flags);
} else /* MULTIPATH are always insync */
set_bit(In_sync, &rdev->flags);
return 0;
}
static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
{
struct mdp_superblock_1 *sb;
mdk_rdev_t *rdev2;
int max_dev, i;
/* make rdev->sb match mddev and rdev data. */
sb = (struct mdp_superblock_1*)page_address(rdev->sb_page);
sb->feature_map = 0;
sb->pad0 = 0;
sb->recovery_offset = cpu_to_le64(0);
memset(sb->pad1, 0, sizeof(sb->pad1));
memset(sb->pad2, 0, sizeof(sb->pad2));
memset(sb->pad3, 0, sizeof(sb->pad3));
sb->utime = cpu_to_le64((__u64)mddev->utime);
sb->events = cpu_to_le64(mddev->events);
if (mddev->in_sync)
sb->resync_offset = cpu_to_le64(mddev->recovery_cp);
else
sb->resync_offset = cpu_to_le64(0);
sb->cnt_corrected_read = cpu_to_le32(atomic_read(&rdev->corrected_errors));
sb->raid_disks = cpu_to_le32(mddev->raid_disks);
sb->size = cpu_to_le64(mddev->dev_sectors);
sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9);
sb->level = cpu_to_le32(mddev->level);
sb->layout = cpu_to_le32(mddev->layout);
if (mddev->bitmap && mddev->bitmap_file == NULL) {
sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET);
}
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags)) {
if (mddev->curr_resync_completed > rdev->recovery_offset)
rdev->recovery_offset = mddev->curr_resync_completed;
if (rdev->recovery_offset > 0) {
sb->feature_map |=
cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET);
sb->recovery_offset =
cpu_to_le64(rdev->recovery_offset);
}
}
if (mddev->reshape_position != MaxSector) {
sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
sb->reshape_position = cpu_to_le64(mddev->reshape_position);
sb->new_layout = cpu_to_le32(mddev->new_layout);
sb->delta_disks = cpu_to_le32(mddev->delta_disks);
sb->new_level = cpu_to_le32(mddev->new_level);
sb->new_chunk = cpu_to_le32(mddev->new_chunk>>9);
}
max_dev = 0;
list_for_each_entry(rdev2, &mddev->disks, same_set)
if (rdev2->desc_nr+1 > max_dev)
max_dev = rdev2->desc_nr+1;
if (max_dev > le32_to_cpu(sb->max_dev))
sb->max_dev = cpu_to_le32(max_dev);
for (i=0; i<max_dev;i++)
sb->dev_roles[i] = cpu_to_le16(0xfffe);
list_for_each_entry(rdev2, &mddev->disks, same_set) {
i = rdev2->desc_nr;
if (test_bit(Faulty, &rdev2->flags))
sb->dev_roles[i] = cpu_to_le16(0xfffe);
else if (test_bit(In_sync, &rdev2->flags))
sb->dev_roles[i] = cpu_to_le16(rdev2->raid_disk);
else if (rdev2->raid_disk >= 0 && rdev2->recovery_offset > 0)
sb->dev_roles[i] = cpu_to_le16(rdev2->raid_disk);
else
sb->dev_roles[i] = cpu_to_le16(0xffff);
}
sb->sb_csum = calc_sb_1_csum(sb);
}
static unsigned long long
super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
{
struct mdp_superblock_1 *sb;
sector_t max_sectors;
if (num_sectors && num_sectors < rdev->mddev->dev_sectors)
return 0; /* component must fit device */
if (rdev->sb_start < rdev->data_offset) {
/* minor versions 1 and 2; superblock before data */
max_sectors = rdev->bdev->bd_inode->i_size >> 9;
max_sectors -= rdev->data_offset;
if (!num_sectors || num_sectors > max_sectors)
num_sectors = max_sectors;
} else if (rdev->mddev->bitmap_offset) {
/* minor version 0 with bitmap we can't move */
return 0;
} else {
/* minor version 0; superblock after data */
sector_t sb_start;
sb_start = (rdev->bdev->bd_inode->i_size >> 9) - 8*2;
sb_start &= ~(sector_t)(4*2 - 1);
max_sectors = rdev->sectors + sb_start - rdev->sb_start;
if (!num_sectors || num_sectors > max_sectors)
num_sectors = max_sectors;
rdev->sb_start = sb_start;
}
sb = (struct mdp_superblock_1 *) page_address(rdev->sb_page);
sb->data_size = cpu_to_le64(num_sectors);
sb->super_offset = rdev->sb_start;
sb->sb_csum = calc_sb_1_csum(sb);
md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
rdev->sb_page);
md_super_wait(rdev->mddev);
return num_sectors / 2; /* kB for sysfs */
}
static struct super_type super_types[] = {
[0] = {
.name = "0.90.0",
.owner = THIS_MODULE,
.load_super = super_90_load,
.validate_super = super_90_validate,
.sync_super = super_90_sync,
.rdev_size_change = super_90_rdev_size_change,
},
[1] = {
.name = "md-1",
.owner = THIS_MODULE,
.load_super = super_1_load,
.validate_super = super_1_validate,
.sync_super = super_1_sync,
.rdev_size_change = super_1_rdev_size_change,
},
};
static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2)
{
mdk_rdev_t *rdev, *rdev2;
rcu_read_lock();
rdev_for_each_rcu(rdev, mddev1)
rdev_for_each_rcu(rdev2, mddev2)
if (rdev->bdev->bd_contains ==
rdev2->bdev->bd_contains) {
rcu_read_unlock();
return 1;
}
rcu_read_unlock();
return 0;
}
static LIST_HEAD(pending_raid_disks);
static void md_integrity_check(mdk_rdev_t *rdev, mddev_t *mddev)
{
struct mdk_personality *pers = mddev->pers;
struct gendisk *disk = mddev->gendisk;
struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
struct blk_integrity *bi_mddev = blk_get_integrity(disk);
/* Data integrity passthrough not supported on RAID 4, 5 and 6 */
if (pers && pers->level >= 4 && pers->level <= 6)
return;
/* If rdev is integrity capable, register profile for mddev */
if (!bi_mddev && bi_rdev) {
if (blk_integrity_register(disk, bi_rdev))
printk(KERN_ERR "%s: %s Could not register integrity!\n",
__func__, disk->disk_name);
else
printk(KERN_NOTICE "Enabling data integrity on %s\n",
disk->disk_name);
return;
}
/* Check that mddev and rdev have matching profiles */
if (blk_integrity_compare(disk, rdev->bdev->bd_disk) < 0) {
printk(KERN_ERR "%s: %s/%s integrity mismatch!\n", __func__,
disk->disk_name, rdev->bdev->bd_disk->disk_name);
printk(KERN_NOTICE "Disabling data integrity on %s\n",
disk->disk_name);
blk_integrity_unregister(disk);
}
}
static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
{
char b[BDEVNAME_SIZE];
struct kobject *ko;
char *s;
int err;
if (rdev->mddev) {
MD_BUG();
return -EINVAL;
}
/* prevent duplicates */
if (find_rdev(mddev, rdev->bdev->bd_dev))
return -EEXIST;
/* make sure rdev->sectors exceeds mddev->dev_sectors */
if (rdev->sectors && (mddev->dev_sectors == 0 ||
rdev->sectors < mddev->dev_sectors)) {
if (mddev->pers) {
/* Cannot change size, so fail
* If mddev->level <= 0, then we don't care
* about aligning sizes (e.g. linear)
*/
if (mddev->level > 0)
return -ENOSPC;
} else
mddev->dev_sectors = rdev->sectors;
}
/* Verify rdev->desc_nr is unique.
* If it is -1, assign a free number, else
* check number is not in use
*/
if (rdev->desc_nr < 0) {
int choice = 0;
if (mddev->pers) choice = mddev->raid_disks;
while (find_rdev_nr(mddev, choice))
choice++;
rdev->desc_nr = choice;
} else {
if (find_rdev_nr(mddev, rdev->desc_nr))
return -EBUSY;
}
if (mddev->max_disks && rdev->desc_nr >= mddev->max_disks) {
printk(KERN_WARNING "md: %s: array is limited to %d devices\n",
mdname(mddev), mddev->max_disks);
return -EBUSY;
}
bdevname(rdev->bdev,b);
while ( (s=strchr(b, '/')) != NULL)
*s = '!';
rdev->mddev = mddev;
printk(KERN_INFO "md: bind<%s>\n", b);
if ((err = kobject_add(&rdev->kobj, &mddev->kobj, "dev-%s", b)))
goto fail;
ko = &part_to_dev(rdev->bdev->bd_part)->kobj;
if ((err = sysfs_create_link(&rdev->kobj, ko, "block"))) {
kobject_del(&rdev->kobj);
goto fail;
}
rdev->sysfs_state = sysfs_get_dirent(rdev->kobj.sd, "state");
list_add_rcu(&rdev->same_set, &mddev->disks);
bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk);
/* May as well allow recovery to be retried once */
mddev->recovery_disabled = 0;
md_integrity_check(rdev, mddev);
return 0;
fail:
printk(KERN_WARNING "md: failed to register dev-%s for %s\n",
b, mdname(mddev));
return err;
}
static void md_delayed_delete(struct work_struct *ws)
{
mdk_rdev_t *rdev = container_of(ws, mdk_rdev_t, del_work);
kobject_del(&rdev->kobj);
kobject_put(&rdev->kobj);
}
static void unbind_rdev_from_array(mdk_rdev_t * rdev)
{
char b[BDEVNAME_SIZE];
if (!rdev->mddev) {
MD_BUG();
return;
}
bd_release_from_disk(rdev->bdev, rdev->mddev->gendisk);
list_del_rcu(&rdev->same_set);
printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b));
rdev->mddev = NULL;
sysfs_remove_link(&rdev->kobj, "block");
sysfs_put(rdev->sysfs_state);
rdev->sysfs_state = NULL;
/* We need to delay this, otherwise we can deadlock when
* writing to 'remove' to "dev/state". We also need
* to delay it due to rcu usage.
*/
synchronize_rcu();
INIT_WORK(&rdev->del_work, md_delayed_delete);
kobject_get(&rdev->kobj);
schedule_work(&rdev->del_work);
}
/*
* prevent the device from being mounted, repartitioned or
* otherwise reused by a RAID array (or any other kernel
* subsystem), by bd_claiming the device.
*/
static int lock_rdev(mdk_rdev_t *rdev, dev_t dev, int shared)
{
int err = 0;
struct block_device *bdev;
char b[BDEVNAME_SIZE];
bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE);
if (IS_ERR(bdev)) {
printk(KERN_ERR "md: could not open %s.\n",
__bdevname(dev, b));
return PTR_ERR(bdev);
}
err = bd_claim(bdev, shared ? (mdk_rdev_t *)lock_rdev : rdev);
if (err) {
printk(KERN_ERR "md: could not bd_claim %s.\n",
bdevname(bdev, b));
blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
return err;
}
if (!shared)
set_bit(AllReserved, &rdev->flags);
rdev->bdev = bdev;
return err;
}
static void unlock_rdev(mdk_rdev_t *rdev)
{
struct block_device *bdev = rdev->bdev;
rdev->bdev = NULL;
if (!bdev)
MD_BUG();
bd_release(bdev);
blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
}
void md_autodetect_dev(dev_t dev);
static void export_rdev(mdk_rdev_t * rdev)
{
char b[BDEVNAME_SIZE];
printk(KERN_INFO "md: export_rdev(%s)\n",
bdevname(rdev->bdev,b));
if (rdev->mddev)
MD_BUG();
free_disk_sb(rdev);
#ifndef MODULE
if (test_bit(AutoDetected, &rdev->flags))
md_autodetect_dev(rdev->bdev->bd_dev);
#endif
unlock_rdev(rdev);
kobject_put(&rdev->kobj);
}
static void kick_rdev_from_array(mdk_rdev_t * rdev)
{
unbind_rdev_from_array(rdev);
export_rdev(rdev);
}
static void export_array(mddev_t *mddev)
{
mdk_rdev_t *rdev, *tmp;
rdev_for_each(rdev, tmp, mddev) {
if (!rdev->mddev) {
MD_BUG();
continue;
}
kick_rdev_from_array(rdev);
}
if (!list_empty(&mddev->disks))
MD_BUG();
mddev->raid_disks = 0;
mddev->major_version = 0;
}
static void print_desc(mdp_disk_t *desc)
{
printk(" DISK<N:%d,(%d,%d),R:%d,S:%d>\n", desc->number,
desc->major,desc->minor,desc->raid_disk,desc->state);
}
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:08 +08:00
static void print_sb_90(mdp_super_t *sb)
{
int i;
printk(KERN_INFO
"md: SB: (V:%d.%d.%d) ID:<%08x.%08x.%08x.%08x> CT:%08x\n",
sb->major_version, sb->minor_version, sb->patch_version,
sb->set_uuid0, sb->set_uuid1, sb->set_uuid2, sb->set_uuid3,
sb->ctime);
printk(KERN_INFO "md: L%d S%08d ND:%d RD:%d md%d LO:%d CS:%d\n",
sb->level, sb->size, sb->nr_disks, sb->raid_disks,
sb->md_minor, sb->layout, sb->chunk_size);
printk(KERN_INFO "md: UT:%08x ST:%d AD:%d WD:%d"
" FD:%d SD:%d CSUM:%08x E:%08lx\n",
sb->utime, sb->state, sb->active_disks, sb->working_disks,
sb->failed_disks, sb->spare_disks,
sb->sb_csum, (unsigned long)sb->events_lo);
printk(KERN_INFO);
for (i = 0; i < MD_SB_DISKS; i++) {
mdp_disk_t *desc;
desc = sb->disks + i;
if (desc->number || desc->major || desc->minor ||
desc->raid_disk || (desc->state && (desc->state != 4))) {
printk(" D %2d: ", i);
print_desc(desc);
}
}
printk(KERN_INFO "md: THIS: ");
print_desc(&sb->this_disk);
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:08 +08:00
}
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:08 +08:00
static void print_sb_1(struct mdp_superblock_1 *sb)
{
__u8 *uuid;
uuid = sb->set_uuid;
printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
KERN_INFO "md: Name: \"%s\" CT:%llu\n",
le32_to_cpu(sb->major_version),
le32_to_cpu(sb->feature_map),
uuid[0], uuid[1], uuid[2], uuid[3],
uuid[4], uuid[5], uuid[6], uuid[7],
uuid[8], uuid[9], uuid[10], uuid[11],
uuid[12], uuid[13], uuid[14], uuid[15],
sb->set_name,
(unsigned long long)le64_to_cpu(sb->ctime)
& MD_SUPERBLOCK_1_TIME_SEC_MASK);
uuid = sb->device_uuid;
printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
" RO:%llu\n"
KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
":%02x%02x%02x%02x%02x%02x\n"
KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
KERN_INFO "md: (MaxDev:%u) \n",
le32_to_cpu(sb->level),
(unsigned long long)le64_to_cpu(sb->size),
le32_to_cpu(sb->raid_disks),
le32_to_cpu(sb->layout),
le32_to_cpu(sb->chunksize),
(unsigned long long)le64_to_cpu(sb->data_offset),
(unsigned long long)le64_to_cpu(sb->data_size),
(unsigned long long)le64_to_cpu(sb->super_offset),
(unsigned long long)le64_to_cpu(sb->recovery_offset),
le32_to_cpu(sb->dev_number),
uuid[0], uuid[1], uuid[2], uuid[3],
uuid[4], uuid[5], uuid[6], uuid[7],
uuid[8], uuid[9], uuid[10], uuid[11],
uuid[12], uuid[13], uuid[14], uuid[15],
sb->devflags,
(unsigned long long)le64_to_cpu(sb->utime) & MD_SUPERBLOCK_1_TIME_SEC_MASK,
(unsigned long long)le64_to_cpu(sb->events),
(unsigned long long)le64_to_cpu(sb->resync_offset),
le32_to_cpu(sb->sb_csum),
le32_to_cpu(sb->max_dev)
);
}
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:08 +08:00
static void print_rdev(mdk_rdev_t *rdev, int major_version)
{
char b[BDEVNAME_SIZE];
printk(KERN_INFO "md: rdev %s, Sect:%08llu F:%d S:%d DN:%u\n",
bdevname(rdev->bdev, b), (unsigned long long)rdev->sectors,
test_bit(Faulty, &rdev->flags), test_bit(In_sync, &rdev->flags),
rdev->desc_nr);
if (rdev->sb_loaded) {
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:08 +08:00
printk(KERN_INFO "md: rdev superblock (MJ:%d):\n", major_version);
switch (major_version) {
case 0:
print_sb_90((mdp_super_t*)page_address(rdev->sb_page));
break;
case 1:
print_sb_1((struct mdp_superblock_1 *)page_address(rdev->sb_page));
break;
}
} else
printk(KERN_INFO "md: no rdev superblock!\n");
}
static void md_print_devices(void)
{
struct list_head *tmp;
mdk_rdev_t *rdev;
mddev_t *mddev;
char b[BDEVNAME_SIZE];
printk("\n");
printk("md: **********************************\n");
printk("md: * <COMPLETE RAID STATE PRINTOUT> *\n");
printk("md: **********************************\n");
for_each_mddev(mddev, tmp) {
if (mddev->bitmap)
bitmap_print_sb(mddev->bitmap);
else
printk("%s: ", mdname(mddev));
list_for_each_entry(rdev, &mddev->disks, same_set)
printk("<%s>", bdevname(rdev->bdev,b));
printk("\n");
list_for_each_entry(rdev, &mddev->disks, same_set)
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:08 +08:00
print_rdev(rdev, mddev->major_version);
}
printk("md: **********************************\n");
printk("\n");
}
static void sync_sbs(mddev_t * mddev, int nospares)
{
/* Update each superblock (in-memory image), but
* if we are allowed to, skip spares which already
* have the right event counter, or have one earlier
* (which would mean they aren't being marked as dirty
* with the rest of the array)
*/
mdk_rdev_t *rdev;
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->sb_events == mddev->events ||
(nospares &&
rdev->raid_disk < 0 &&
(rdev->sb_events&1)==0 &&
rdev->sb_events+1 == mddev->events)) {
/* Don't update this superblock */
rdev->sb_loaded = 2;
} else {
super_types[mddev->major_version].
sync_super(mddev, rdev);
rdev->sb_loaded = 1;
}
}
}
static void md_update_sb(mddev_t * mddev, int force_change)
{
mdk_rdev_t *rdev;
int sync_req;
int nospares = 0;
if (mddev->external)
return;
repeat:
2005-11-09 13:39:34 +08:00
spin_lock_irq(&mddev->write_lock);
set_bit(MD_CHANGE_PENDING, &mddev->flags);
if (test_and_clear_bit(MD_CHANGE_DEVS, &mddev->flags))
force_change = 1;
if (test_and_clear_bit(MD_CHANGE_CLEAN, &mddev->flags))
/* just a clean<-> dirty transition, possibly leave spares alone,
* though if events isn't the right even/odd, we will have to do
* spares after all
*/
nospares = 1;
if (force_change)
nospares = 0;
if (mddev->degraded)
/* If the array is degraded, then skipping spares is both
* dangerous and fairly pointless.
* Dangerous because a device that was removed from the array
* might have a event_count that still looks up-to-date,
* so it can be re-added without a resync.
* Pointless because if there are any spares to skip,
* then a recovery will happen and soon that array won't
* be degraded any more and the spare can go back to sleep then.
*/
nospares = 0;
sync_req = mddev->in_sync;
mddev->utime = get_seconds();
/* If this is just a dirty<->clean transition, and the array is clean
* and 'events' is odd, we can roll back to the previous clean state */
if (nospares
&& (mddev->in_sync && mddev->recovery_cp == MaxSector)
&& (mddev->events & 1)
&& mddev->events != 1)
mddev->events--;
else {
/* otherwise we have to go forward and ... */
mddev->events ++;
if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */
/* .. if the array isn't clean, insist on an odd 'events' */
if ((mddev->events&1)==0) {
mddev->events++;
nospares = 0;
}
} else {
/* otherwise insist on an even 'events' (for clean states) */
if ((mddev->events&1)) {
mddev->events++;
nospares = 0;
}
}
}
if (!mddev->events) {
/*
* oops, this 64-bit counter should never wrap.
* Either we are in around ~1 trillion A.C., assuming
* 1 reboot per second, or we have a bug:
*/
MD_BUG();
mddev->events --;
}
/*
* do not write anything to disk if using
* nonpersistent superblocks
*/
if (!mddev->persistent) {
if (!mddev->external)
clear_bit(MD_CHANGE_PENDING, &mddev->flags);
2005-11-09 13:39:34 +08:00
spin_unlock_irq(&mddev->write_lock);
wake_up(&mddev->sb_wait);
return;
}
sync_sbs(mddev, nospares);
2005-11-09 13:39:34 +08:00
spin_unlock_irq(&mddev->write_lock);
dprintk(KERN_INFO
"md: updating %s RAID superblock on device (in sync %d)\n",
mdname(mddev),mddev->in_sync);
bitmap_update_sb(mddev->bitmap);
list_for_each_entry(rdev, &mddev->disks, same_set) {
char b[BDEVNAME_SIZE];
dprintk(KERN_INFO "md: ");
if (rdev->sb_loaded != 1)
continue; /* no noise on spare devices */
if (test_bit(Faulty, &rdev->flags))
dprintk("(skipping faulty ");
dprintk("%s ", bdevname(rdev->bdev,b));
if (!test_bit(Faulty, &rdev->flags)) {
md_super_write(mddev,rdev,
rdev->sb_start, rdev->sb_size,
rdev->sb_page);
dprintk(KERN_INFO "(write) %s's sb offset: %llu\n",
bdevname(rdev->bdev,b),
(unsigned long long)rdev->sb_start);
rdev->sb_events = mddev->events;
} else
dprintk(")\n");
if (mddev->level == LEVEL_MULTIPATH)
/* only need to write one superblock... */
break;
}
2005-11-09 13:39:34 +08:00
md_super_wait(mddev);
/* if there was a failure, MD_CHANGE_DEVS was set, and we re-write super */
2005-11-09 13:39:34 +08:00
spin_lock_irq(&mddev->write_lock);
if (mddev->in_sync != sync_req ||
test_bit(MD_CHANGE_DEVS, &mddev->flags)) {
/* have to write it out again */
2005-11-09 13:39:34 +08:00
spin_unlock_irq(&mddev->write_lock);
goto repeat;
}
clear_bit(MD_CHANGE_PENDING, &mddev->flags);
2005-11-09 13:39:34 +08:00
spin_unlock_irq(&mddev->write_lock);
wake_up(&mddev->sb_wait);
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
/* words written to sysfs files may, or may not, be \n terminated.
* We want to accept with case. For this we use cmd_match.
*/
static int cmd_match(const char *cmd, const char *str)
{
/* See if cmd, written into a sysfs file, matches
* str. They must either be the same, or cmd can
* have a trailing newline
*/
while (*cmd && *str && *cmd == *str) {
cmd++;
str++;
}
if (*cmd == '\n')
cmd++;
if (*str || *cmd)
return 0;
return 1;
}
struct rdev_sysfs_entry {
struct attribute attr;
ssize_t (*show)(mdk_rdev_t *, char *);
ssize_t (*store)(mdk_rdev_t *, const char *, size_t);
};
static ssize_t
state_show(mdk_rdev_t *rdev, char *page)
{
char *sep = "";
size_t len = 0;
if (test_bit(Faulty, &rdev->flags)) {
len+= sprintf(page+len, "%sfaulty",sep);
sep = ",";
}
if (test_bit(In_sync, &rdev->flags)) {
len += sprintf(page+len, "%sin_sync",sep);
sep = ",";
}
if (test_bit(WriteMostly, &rdev->flags)) {
len += sprintf(page+len, "%swrite_mostly",sep);
sep = ",";
}
if (test_bit(Blocked, &rdev->flags)) {
len += sprintf(page+len, "%sblocked", sep);
sep = ",";
}
if (!test_bit(Faulty, &rdev->flags) &&
!test_bit(In_sync, &rdev->flags)) {
len += sprintf(page+len, "%sspare", sep);
sep = ",";
}
return len+sprintf(page+len, "\n");
}
static ssize_t
state_store(mdk_rdev_t *rdev, const char *buf, size_t len)
{
/* can write
* faulty - simulates and error
* remove - disconnects the device
* writemostly - sets write_mostly
* -writemostly - clears write_mostly
* blocked - sets the Blocked flag
* -blocked - clears the Blocked flag
* insync - sets Insync providing device isn't active
*/
int err = -EINVAL;
if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
md_error(rdev->mddev, rdev);
err = 0;
} else if (cmd_match(buf, "remove")) {
if (rdev->raid_disk >= 0)
err = -EBUSY;
else {
mddev_t *mddev = rdev->mddev;
kick_rdev_from_array(rdev);
if (mddev->pers)
md_update_sb(mddev, 1);
md_new_event(mddev);
err = 0;
}
} else if (cmd_match(buf, "writemostly")) {
set_bit(WriteMostly, &rdev->flags);
err = 0;
} else if (cmd_match(buf, "-writemostly")) {
clear_bit(WriteMostly, &rdev->flags);
err = 0;
} else if (cmd_match(buf, "blocked")) {
set_bit(Blocked, &rdev->flags);
err = 0;
} else if (cmd_match(buf, "-blocked")) {
clear_bit(Blocked, &rdev->flags);
wake_up(&rdev->blocked_wait);
set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery);
md_wakeup_thread(rdev->mddev->thread);
err = 0;
} else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
set_bit(In_sync, &rdev->flags);
err = 0;
}
if (!err && rdev->sysfs_state)
sysfs_notify_dirent(rdev->sysfs_state);
return err ? err : len;
}
static struct rdev_sysfs_entry rdev_state =
__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
static ssize_t
errors_show(mdk_rdev_t *rdev, char *page)
{
return sprintf(page, "%d\n", atomic_read(&rdev->corrected_errors));
}
static ssize_t
errors_store(mdk_rdev_t *rdev, const char *buf, size_t len)
{
char *e;
unsigned long n = simple_strtoul(buf, &e, 10);
if (*buf && (*e == 0 || *e == '\n')) {
atomic_set(&rdev->corrected_errors, n);
return len;
}
return -EINVAL;
}
static struct rdev_sysfs_entry rdev_errors =
__ATTR(errors, S_IRUGO|S_IWUSR, errors_show, errors_store);
static ssize_t
slot_show(mdk_rdev_t *rdev, char *page)
{
if (rdev->raid_disk < 0)
return sprintf(page, "none\n");
else
return sprintf(page, "%d\n", rdev->raid_disk);
}
static ssize_t
slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
{
char *e;
int err;
char nm[20];
int slot = simple_strtoul(buf, &e, 10);
if (strncmp(buf, "none", 4)==0)
slot = -1;
else if (e==buf || (*e && *e!= '\n'))
return -EINVAL;
if (rdev->mddev->pers && slot == -1) {
/* Setting 'slot' on an active array requires also
* updating the 'rd%d' link, and communicating
* with the personality with ->hot_*_disk.
* For now we only support removing
* failed/spare devices. This normally happens automatically,
* but not when the metadata is externally managed.
*/
if (rdev->raid_disk == -1)
return -EEXIST;
/* personality does all needed checks */
if (rdev->mddev->pers->hot_add_disk == NULL)
return -EINVAL;
err = rdev->mddev->pers->
hot_remove_disk(rdev->mddev, rdev->raid_disk);
if (err)
return err;
sprintf(nm, "rd%d", rdev->raid_disk);
sysfs_remove_link(&rdev->mddev->kobj, nm);
set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery);
md_wakeup_thread(rdev->mddev->thread);
} else if (rdev->mddev->pers) {
mdk_rdev_t *rdev2;
/* Activating a spare .. or possibly reactivating
* if we ever get bitmaps working here.
*/
if (rdev->raid_disk != -1)
return -EBUSY;
if (rdev->mddev->pers->hot_add_disk == NULL)
return -EINVAL;
list_for_each_entry(rdev2, &rdev->mddev->disks, same_set)
if (rdev2->raid_disk == slot)
return -EEXIST;
rdev->raid_disk = slot;
if (test_bit(In_sync, &rdev->flags))
rdev->saved_raid_disk = slot;
else
rdev->saved_raid_disk = -1;
err = rdev->mddev->pers->
hot_add_disk(rdev->mddev, rdev);
if (err) {
rdev->raid_disk = -1;
return err;
} else
sysfs_notify_dirent(rdev->sysfs_state);
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm))
printk(KERN_WARNING
"md: cannot register "
"%s for %s\n",
nm, mdname(rdev->mddev));
/* don't wakeup anyone, leave that to userspace. */
} else {
if (slot >= rdev->mddev->raid_disks)
return -ENOSPC;
rdev->raid_disk = slot;
/* assume it is working */
clear_bit(Faulty, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
set_bit(In_sync, &rdev->flags);
sysfs_notify_dirent(rdev->sysfs_state);
}
return len;
}
static struct rdev_sysfs_entry rdev_slot =
__ATTR(slot, S_IRUGO|S_IWUSR, slot_show, slot_store);
static ssize_t
offset_show(mdk_rdev_t *rdev, char *page)
{
return sprintf(page, "%llu\n", (unsigned long long)rdev->data_offset);
}
static ssize_t
offset_store(mdk_rdev_t *rdev, const char *buf, size_t len)
{
char *e;
unsigned long long offset = simple_strtoull(buf, &e, 10);
if (e==buf || (*e && *e != '\n'))
return -EINVAL;
if (rdev->mddev->pers && rdev->raid_disk >= 0)
return -EBUSY;
if (rdev->sectors && rdev->mddev->external)
/* Must set offset before size, so overlap checks
* can be sane */
return -EBUSY;
rdev->data_offset = offset;
return len;
}
static struct rdev_sysfs_entry rdev_offset =
__ATTR(offset, S_IRUGO|S_IWUSR, offset_show, offset_store);
static ssize_t
rdev_size_show(mdk_rdev_t *rdev, char *page)
{
return sprintf(page, "%llu\n", (unsigned long long)rdev->sectors / 2);
}
static int overlaps(sector_t s1, sector_t l1, sector_t s2, sector_t l2)
{
/* check if two start/length pairs overlap */
if (s1+l1 <= s2)
return 0;
if (s2+l2 <= s1)
return 0;
return 1;
}
static int strict_blocks_to_sectors(const char *buf, sector_t *sectors)
{
unsigned long long blocks;
sector_t new;
if (strict_strtoull(buf, 10, &blocks) < 0)
return -EINVAL;
if (blocks & 1ULL << (8 * sizeof(blocks) - 1))
return -EINVAL; /* sector conversion overflow */
new = blocks * 2;
if (new != blocks * 2)
return -EINVAL; /* unsigned long long to sector_t overflow */
*sectors = new;
return 0;
}
static ssize_t
rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len)
{
mddev_t *my_mddev = rdev->mddev;
sector_t oldsectors = rdev->sectors;
sector_t sectors;
if (strict_blocks_to_sectors(buf, &sectors) < 0)
return -EINVAL;
if (my_mddev->pers && rdev->raid_disk >= 0) {
if (my_mddev->persistent) {
sectors = super_types[my_mddev->major_version].
rdev_size_change(rdev, sectors);
if (!sectors)
return -EBUSY;
} else if (!sectors)
sectors = (rdev->bdev->bd_inode->i_size >> 9) -
rdev->data_offset;
}
if (sectors < my_mddev->dev_sectors)
return -EINVAL; /* component must fit device */
rdev->sectors = sectors;
if (sectors > oldsectors && my_mddev->external) {
/* need to check that all other rdevs with the same ->bdev
* do not overlap. We need to unlock the mddev to avoid
* a deadlock. We have already changed rdev->sectors, and if
* we have to change it back, we will have the lock again.
*/
mddev_t *mddev;
int overlap = 0;
struct list_head *tmp;
mddev_unlock(my_mddev);
for_each_mddev(mddev, tmp) {
mdk_rdev_t *rdev2;
mddev_lock(mddev);
list_for_each_entry(rdev2, &mddev->disks, same_set)
if (test_bit(AllReserved, &rdev2->flags) ||
(rdev->bdev == rdev2->bdev &&
rdev != rdev2 &&
overlaps(rdev->data_offset, rdev->sectors,
rdev2->data_offset,
rdev2->sectors))) {
overlap = 1;
break;
}
mddev_unlock(mddev);
if (overlap) {
mddev_put(mddev);
break;
}
}
mddev_lock(my_mddev);
if (overlap) {
/* Someone else could have slipped in a size
* change here, but doing so is just silly.
* We put oldsectors back because we *know* it is
* safe, and trust userspace not to race with
* itself
*/
rdev->sectors = oldsectors;
return -EBUSY;
}
}
return len;
}
static struct rdev_sysfs_entry rdev_size =
__ATTR(size, S_IRUGO|S_IWUSR, rdev_size_show, rdev_size_store);
static struct attribute *rdev_default_attrs[] = {
&rdev_state.attr,
&rdev_errors.attr,
&rdev_slot.attr,
&rdev_offset.attr,
&rdev_size.attr,
NULL,
};
static ssize_t
rdev_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
{
struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr);
mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj);
mddev_t *mddev = rdev->mddev;
ssize_t rv;
if (!entry->show)
return -EIO;
rv = mddev ? mddev_lock(mddev) : -EBUSY;
if (!rv) {
if (rdev->mddev == NULL)
rv = -EBUSY;
else
rv = entry->show(rdev, page);
mddev_unlock(mddev);
}
return rv;
}
static ssize_t
rdev_attr_store(struct kobject *kobj, struct attribute *attr,
const char *page, size_t length)
{
struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr);
mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj);
ssize_t rv;
mddev_t *mddev = rdev->mddev;
if (!entry->store)
return -EIO;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
rv = mddev ? mddev_lock(mddev): -EBUSY;
if (!rv) {
if (rdev->mddev == NULL)
rv = -EBUSY;
else
rv = entry->store(rdev, page, length);
mddev_unlock(mddev);
}
return rv;
}
static void rdev_free(struct kobject *ko)
{
mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj);
kfree(rdev);
}
static struct sysfs_ops rdev_sysfs_ops = {
.show = rdev_attr_show,
.store = rdev_attr_store,
};
static struct kobj_type rdev_ktype = {
.release = rdev_free,
.sysfs_ops = &rdev_sysfs_ops,
.default_attrs = rdev_default_attrs,
};
/*
* Import a device. If 'super_format' >= 0, then sanity check the superblock
*
* mark the device faulty if:
*
* - the device is nonexistent (zero size)
* - the device has no valid superblock
*
* a faulty rdev _never_ has rdev->sb set.
*/
static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_minor)
{
char b[BDEVNAME_SIZE];
int err;
mdk_rdev_t *rdev;
sector_t size;
rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
if (!rdev) {
printk(KERN_ERR "md: could not alloc mem for new device!\n");
return ERR_PTR(-ENOMEM);
}
if ((err = alloc_disk_sb(rdev)))
goto abort_free;
err = lock_rdev(rdev, newdev, super_format == -2);
if (err)
goto abort_free;
kobject_init(&rdev->kobj, &rdev_ktype);
rdev->desc_nr = -1;
rdev->saved_raid_disk = -1;
rdev->raid_disk = -1;
rdev->flags = 0;
rdev->data_offset = 0;
rdev->sb_events = 0;
atomic_set(&rdev->nr_pending, 0);
atomic_set(&rdev->read_errors, 0);
atomic_set(&rdev->corrected_errors, 0);
size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS;
if (!size) {
printk(KERN_WARNING
"md: %s has zero or unknown size, marking faulty!\n",
bdevname(rdev->bdev,b));
err = -EINVAL;
goto abort_free;
}
if (super_format >= 0) {
err = super_types[super_format].
load_super(rdev, NULL, super_minor);
if (err == -EINVAL) {
printk(KERN_WARNING
"md: %s does not have a valid v%d.%d "
"superblock, not importing!\n",
bdevname(rdev->bdev,b),
super_format, super_minor);
goto abort_free;
}
if (err < 0) {
printk(KERN_WARNING
"md: could not read %s's sb, not importing!\n",
bdevname(rdev->bdev,b));
goto abort_free;
}
}
INIT_LIST_HEAD(&rdev->same_set);
init_waitqueue_head(&rdev->blocked_wait);
return rdev;
abort_free:
if (rdev->sb_page) {
if (rdev->bdev)
unlock_rdev(rdev);
free_disk_sb(rdev);
}
kfree(rdev);
return ERR_PTR(err);
}
/*
* Check a full RAID array for plausibility
*/
static void analyze_sbs(mddev_t * mddev)
{
int i;
mdk_rdev_t *rdev, *freshest, *tmp;
char b[BDEVNAME_SIZE];
freshest = NULL;
rdev_for_each(rdev, tmp, mddev)
switch (super_types[mddev->major_version].
load_super(rdev, freshest, mddev->minor_version)) {
case 1:
freshest = rdev;
break;
case 0:
break;
default:
printk( KERN_ERR \
"md: fatal superblock inconsistency in %s"
" -- removing from array\n",
bdevname(rdev->bdev,b));
kick_rdev_from_array(rdev);
}
super_types[mddev->major_version].
validate_super(mddev, freshest);
i = 0;
rdev_for_each(rdev, tmp, mddev) {
if (rdev->desc_nr >= mddev->max_disks ||
i > mddev->max_disks) {
printk(KERN_WARNING
"md: %s: %s: only %d devices permitted\n",
mdname(mddev), bdevname(rdev->bdev, b),
mddev->max_disks);
kick_rdev_from_array(rdev);
continue;
}
if (rdev != freshest)
if (super_types[mddev->major_version].
validate_super(mddev, rdev)) {
printk(KERN_WARNING "md: kicking non-fresh %s"
" from array!\n",
bdevname(rdev->bdev,b));
kick_rdev_from_array(rdev);
continue;
}
if (mddev->level == LEVEL_MULTIPATH) {
rdev->desc_nr = i++;
rdev->raid_disk = rdev->desc_nr;
set_bit(In_sync, &rdev->flags);
} else if (rdev->raid_disk >= mddev->raid_disks) {
rdev->raid_disk = -1;
clear_bit(In_sync, &rdev->flags);
}
}
if (mddev->recovery_cp != MaxSector &&
mddev->level >= 1)
printk(KERN_ERR "md: %s: raid array is not clean"
" -- starting background reconstruction\n",
mdname(mddev));
}
static void md_safemode_timeout(unsigned long data);
static ssize_t
safe_delay_show(mddev_t *mddev, char *page)
{
int msec = (mddev->safemode_delay*1000)/HZ;
return sprintf(page, "%d.%03d\n", msec/1000, msec%1000);
}
static ssize_t
safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len)
{
int scale=1;
int dot=0;
int i;
unsigned long msec;
char buf[30];
/* remove a period, and count digits after it */
if (len >= sizeof(buf))
return -EINVAL;
strlcpy(buf, cbuf, sizeof(buf));
for (i=0; i<len; i++) {
if (dot) {
if (isdigit(buf[i])) {
buf[i-1] = buf[i];
scale *= 10;
}
buf[i] = 0;
} else if (buf[i] == '.') {
dot=1;
buf[i] = 0;
}
}
if (strict_strtoul(buf, 10, &msec) < 0)
return -EINVAL;
msec = (msec * 1000) / scale;
if (msec == 0)
mddev->safemode_delay = 0;
else {
unsigned long old_delay = mddev->safemode_delay;
mddev->safemode_delay = (msec*HZ)/1000;
if (mddev->safemode_delay == 0)
mddev->safemode_delay = 1;
if (mddev->safemode_delay < old_delay)
md_safemode_timeout((unsigned long)mddev);
}
return len;
}
static struct md_sysfs_entry md_safe_delay =
__ATTR(safe_mode_delay, S_IRUGO|S_IWUSR,safe_delay_show, safe_delay_store);
static ssize_t
level_show(mddev_t *mddev, char *page)
{
struct mdk_personality *p = mddev->pers;
if (p)
return sprintf(page, "%s\n", p->name);
else if (mddev->clevel[0])
return sprintf(page, "%s\n", mddev->clevel);
else if (mddev->level != LEVEL_NONE)
return sprintf(page, "%d\n", mddev->level);
else
return 0;
}
static ssize_t
level_store(mddev_t *mddev, const char *buf, size_t len)
{
char level[16];
ssize_t rv = len;
struct mdk_personality *pers;
void *priv;
if (mddev->pers == NULL) {
if (len == 0)
return 0;
if (len >= sizeof(mddev->clevel))
return -ENOSPC;
strncpy(mddev->clevel, buf, len);
if (mddev->clevel[len-1] == '\n')
len--;
mddev->clevel[len] = 0;
mddev->level = LEVEL_NONE;
return rv;
}
/* request to change the personality. Need to ensure:
* - array is not engaged in resync/recovery/reshape
* - old personality can be suspended
* - new personality will access other array.
*/
if (mddev->sync_thread || mddev->reshape_position != MaxSector)
return -EBUSY;
if (!mddev->pers->quiesce) {
printk(KERN_WARNING "md: %s: %s does not support online personality change\n",
mdname(mddev), mddev->pers->name);
return -EINVAL;
}
/* Now find the new personality */
if (len == 0 || len >= sizeof(level))
return -EINVAL;
strncpy(level, buf, len);
if (level[len-1] == '\n')
len--;
level[len] = 0;
request_module("md-%s", level);
spin_lock(&pers_lock);
pers = find_pers(LEVEL_NONE, level);
if (!pers || !try_module_get(pers->owner)) {
spin_unlock(&pers_lock);
printk(KERN_WARNING "md: personality %s not loaded\n", level);
return -EINVAL;
}
spin_unlock(&pers_lock);
if (pers == mddev->pers) {
/* Nothing to do! */
module_put(pers->owner);
return rv;
}
if (!pers->takeover) {
module_put(pers->owner);
printk(KERN_WARNING "md: %s: %s does not support personality takeover\n",
mdname(mddev), level);
return -EINVAL;
}
/* ->takeover must set new_* and/or delta_disks
* if it succeeds, and may set them when it fails.
*/
priv = pers->takeover(mddev);
if (IS_ERR(priv)) {
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk = mddev->chunk_size;
mddev->raid_disks -= mddev->delta_disks;
mddev->delta_disks = 0;
module_put(pers->owner);
printk(KERN_WARNING "md: %s: %s would not accept array\n",
mdname(mddev), level);
return PTR_ERR(priv);
}
/* Looks like we have a winner */
mddev_suspend(mddev);
mddev->pers->stop(mddev);
module_put(mddev->pers->owner);
mddev->pers = pers;
mddev->private = priv;
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
mddev->level = mddev->new_level;
mddev->layout = mddev->new_layout;
mddev->chunk_size = mddev->new_chunk;
mddev->delta_disks = 0;
pers->run(mddev);
mddev_resume(mddev);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
return rv;
}
static struct md_sysfs_entry md_level =
__ATTR(level, S_IRUGO|S_IWUSR, level_show, level_store);
static ssize_t
layout_show(mddev_t *mddev, char *page)
{
/* just a number, not meaningful for all levels */
if (mddev->reshape_position != MaxSector &&
mddev->layout != mddev->new_layout)
return sprintf(page, "%d (%d)\n",
mddev->new_layout, mddev->layout);
return sprintf(page, "%d\n", mddev->layout);
}
static ssize_t
layout_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
unsigned long n = simple_strtoul(buf, &e, 10);
if (!*buf || (*e && *e != '\n'))
return -EINVAL;
if (mddev->pers) {
int err;
if (mddev->pers->reconfig == NULL)
return -EBUSY;
err = mddev->pers->reconfig(mddev, n, -1);
if (err)
return err;
} else {
mddev->new_layout = n;
if (mddev->reshape_position == MaxSector)
mddev->layout = n;
}
return len;
}
static struct md_sysfs_entry md_layout =
__ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
static ssize_t
raid_disks_show(mddev_t *mddev, char *page)
{
if (mddev->raid_disks == 0)
return 0;
if (mddev->reshape_position != MaxSector &&
mddev->delta_disks != 0)
return sprintf(page, "%d (%d)\n", mddev->raid_disks,
mddev->raid_disks - mddev->delta_disks);
return sprintf(page, "%d\n", mddev->raid_disks);
}
static int update_raid_disks(mddev_t *mddev, int raid_disks);
static ssize_t
raid_disks_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
int rv = 0;
unsigned long n = simple_strtoul(buf, &e, 10);
if (!*buf || (*e && *e != '\n'))
return -EINVAL;
if (mddev->pers)
rv = update_raid_disks(mddev, n);
else if (mddev->reshape_position != MaxSector) {
int olddisks = mddev->raid_disks - mddev->delta_disks;
mddev->delta_disks = n - olddisks;
mddev->raid_disks = n;
} else
mddev->raid_disks = n;
return rv ? rv : len;
}
static struct md_sysfs_entry md_raid_disks =
__ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
static ssize_t
chunk_size_show(mddev_t *mddev, char *page)
{
if (mddev->reshape_position != MaxSector &&
mddev->chunk_size != mddev->new_chunk)
return sprintf(page, "%d (%d)\n", mddev->new_chunk,
mddev->chunk_size);
return sprintf(page, "%d\n", mddev->chunk_size);
}
static ssize_t
chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
unsigned long n = simple_strtoul(buf, &e, 10);
if (!*buf || (*e && *e != '\n'))
return -EINVAL;
if (mddev->pers) {
int err;
if (mddev->pers->reconfig == NULL)
return -EBUSY;
err = mddev->pers->reconfig(mddev, -1, n);
if (err)
return err;
} else {
mddev->new_chunk = n;
if (mddev->reshape_position == MaxSector)
mddev->chunk_size = n;
}
return len;
}
static struct md_sysfs_entry md_chunk_size =
__ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
static ssize_t
resync_start_show(mddev_t *mddev, char *page)
{
if (mddev->recovery_cp == MaxSector)
return sprintf(page, "none\n");
return sprintf(page, "%llu\n", (unsigned long long)mddev->recovery_cp);
}
static ssize_t
resync_start_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
unsigned long long n = simple_strtoull(buf, &e, 10);
if (mddev->pers)
return -EBUSY;
if (!*buf || (*e && *e != '\n'))
return -EINVAL;
mddev->recovery_cp = n;
return len;
}
static struct md_sysfs_entry md_resync_start =
__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store);
/*
* The array state can be:
*
* clear
* No devices, no size, no level
* Equivalent to STOP_ARRAY ioctl
* inactive
* May have some settings, but array is not active
* all IO results in error
* When written, doesn't tear down array, but just stops it
* suspended (not supported yet)
* All IO requests will block. The array can be reconfigured.
* Writing this, if accepted, will block until array is quiescent
* readonly
* no resync can happen. no superblocks get written.
* write requests fail
* read-auto
* like readonly, but behaves like 'clean' on a write request.
*
* clean - no pending writes, but otherwise active.
* When written to inactive array, starts without resync
* If a write request arrives then
* if metadata is known, mark 'dirty' and switch to 'active'.
* if not known, block and switch to write-pending
* If written to an active array that has pending writes, then fails.
* active
* fully active: IO and resync can be happening.
* When written to inactive array, starts with resync
*
* write-pending
* clean, but writes are blocked waiting for 'active' to be written.
*
* active-idle
* like active, but no writes have been seen for a while (100msec).
*
*/
enum array_state { clear, inactive, suspended, readonly, read_auto, clean, active,
write_pending, active_idle, bad_word};
static char *array_states[] = {
"clear", "inactive", "suspended", "readonly", "read-auto", "clean", "active",
"write-pending", "active-idle", NULL };
static int match_word(const char *word, char **list)
{
int n;
for (n=0; list[n]; n++)
if (cmd_match(word, list[n]))
break;
return n;
}
static ssize_t
array_state_show(mddev_t *mddev, char *page)
{
enum array_state st = inactive;
if (mddev->pers)
switch(mddev->ro) {
case 1:
st = readonly;
break;
case 2:
st = read_auto;
break;
case 0:
if (mddev->in_sync)
st = clean;
else if (test_bit(MD_CHANGE_CLEAN, &mddev->flags))
st = write_pending;
else if (mddev->safemode)
st = active_idle;
else
st = active;
}
else {
if (list_empty(&mddev->disks) &&
mddev->raid_disks == 0 &&
mddev->dev_sectors == 0)
st = clear;
else
st = inactive;
}
return sprintf(page, "%s\n", array_states[st]);
}
static int do_md_stop(mddev_t * mddev, int ro, int is_open);
static int do_md_run(mddev_t * mddev);
static int restart_array(mddev_t *mddev);
static ssize_t
array_state_store(mddev_t *mddev, const char *buf, size_t len)
{
int err = -EINVAL;
enum array_state st = match_word(buf, array_states);
switch(st) {
case bad_word:
break;
case clear:
/* stopping an active array */
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
err = do_md_stop(mddev, 0, 0);
break;
case inactive:
/* stopping an active array */
if (mddev->pers) {
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
err = do_md_stop(mddev, 2, 0);
} else
err = 0; /* already inactive */
break;
case suspended:
break; /* not supported yet */
case readonly:
if (mddev->pers)
err = do_md_stop(mddev, 1, 0);
else {
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
err = do_md_run(mddev);
}
break;
case read_auto:
if (mddev->pers) {
if (mddev->ro == 0)
err = do_md_stop(mddev, 1, 0);
else if (mddev->ro == 1)
err = restart_array(mddev);
if (err == 0) {
mddev->ro = 2;
set_disk_ro(mddev->gendisk, 0);
}
} else {
mddev->ro = 2;
err = do_md_run(mddev);
}
break;
case clean:
if (mddev->pers) {
restart_array(mddev);
spin_lock_irq(&mddev->write_lock);
if (atomic_read(&mddev->writes_pending) == 0) {
if (mddev->in_sync == 0) {
mddev->in_sync = 1;
if (mddev->safemode == 1)
mddev->safemode = 0;
if (mddev->persistent)
set_bit(MD_CHANGE_CLEAN,
&mddev->flags);
}
err = 0;
} else
err = -EBUSY;
spin_unlock_irq(&mddev->write_lock);
} else
err = -EINVAL;
break;
case active:
if (mddev->pers) {
restart_array(mddev);
if (mddev->external)
clear_bit(MD_CHANGE_CLEAN, &mddev->flags);
wake_up(&mddev->sb_wait);
err = 0;
} else {
mddev->ro = 0;
set_disk_ro(mddev->gendisk, 0);
err = do_md_run(mddev);
}
break;
case write_pending:
case active_idle:
/* these cannot be set */
break;
}
if (err)
return err;
else {
sysfs_notify_dirent(mddev->sysfs_state);
return len;
}
}
static struct md_sysfs_entry md_array_state =
__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
static ssize_t
null_show(mddev_t *mddev, char *page)
{
return -EINVAL;
}
static ssize_t
new_dev_store(mddev_t *mddev, const char *buf, size_t len)
{
/* buf must be %d:%d\n? giving major and minor numbers */
/* The new device is added to the array.
* If the array has a persistent superblock, we read the
* superblock to initialise info and check validity.
* Otherwise, only checking done is that in bind_rdev_to_array,
* which mainly checks size.
*/
char *e;
int major = simple_strtoul(buf, &e, 10);
int minor;
dev_t dev;
mdk_rdev_t *rdev;
int err;
if (!*buf || *e != ':' || !e[1] || e[1] == '\n')
return -EINVAL;
minor = simple_strtoul(e+1, &e, 10);
if (*e && *e != '\n')
return -EINVAL;
dev = MKDEV(major, minor);
if (major != MAJOR(dev) ||
minor != MINOR(dev))
return -EOVERFLOW;
if (mddev->persistent) {
rdev = md_import_device(dev, mddev->major_version,
mddev->minor_version);
if (!IS_ERR(rdev) && !list_empty(&mddev->disks)) {
mdk_rdev_t *rdev0 = list_entry(mddev->disks.next,
mdk_rdev_t, same_set);
err = super_types[mddev->major_version]
.load_super(rdev, rdev0, mddev->minor_version);
if (err < 0)
goto out;
}
} else if (mddev->external)
rdev = md_import_device(dev, -2, -1);
else
rdev = md_import_device(dev, -1, -1);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
err = bind_rdev_to_array(rdev, mddev);
out:
if (err)
export_rdev(rdev);
return err ? err : len;
}
static struct md_sysfs_entry md_new_device =
__ATTR(new_dev, S_IWUSR, null_show, new_dev_store);
static ssize_t
bitmap_store(mddev_t *mddev, const char *buf, size_t len)
{
char *end;
unsigned long chunk, end_chunk;
if (!mddev->bitmap)
goto out;
/* buf should be <chunk> <chunk> ... or <chunk>-<chunk> ... (range) */
while (*buf) {
chunk = end_chunk = simple_strtoul(buf, &end, 0);
if (buf == end) break;
if (*end == '-') { /* range */
buf = end + 1;
end_chunk = simple_strtoul(buf, &end, 0);
if (buf == end) break;
}
if (*end && !isspace(*end)) break;
bitmap_dirty_bits(mddev->bitmap, chunk, end_chunk);
buf = end;
while (isspace(*buf)) buf++;
}
bitmap_unplug(mddev->bitmap); /* flush the bits to disk */
out:
return len;
}
static struct md_sysfs_entry md_bitmap =
__ATTR(bitmap_set_bits, S_IWUSR, null_show, bitmap_store);
static ssize_t
size_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long)mddev->dev_sectors / 2);
}
static int update_size(mddev_t *mddev, sector_t num_sectors);
static ssize_t
size_store(mddev_t *mddev, const char *buf, size_t len)
{
/* If array is inactive, we can reduce the component size, but
* not increase it (except from 0).
* If array is active, we can try an on-line resize
*/
sector_t sectors;
int err = strict_blocks_to_sectors(buf, &sectors);
if (err < 0)
return err;
if (mddev->pers) {
err = update_size(mddev, sectors);
md_update_sb(mddev, 1);
} else {
if (mddev->dev_sectors == 0 ||
mddev->dev_sectors > sectors)
mddev->dev_sectors = sectors;
else
err = -ENOSPC;
}
return err ? err : len;
}
static struct md_sysfs_entry md_size =
__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
/* Metdata version.
* This is one of
* 'none' for arrays with no metadata (good luck...)
* 'external' for arrays with externally managed metadata,
* or N.M for internally known formats
*/
static ssize_t
metadata_show(mddev_t *mddev, char *page)
{
if (mddev->persistent)
return sprintf(page, "%d.%d\n",
mddev->major_version, mddev->minor_version);
else if (mddev->external)
return sprintf(page, "external:%s\n", mddev->metadata_type);
else
return sprintf(page, "none\n");
}
static ssize_t
metadata_store(mddev_t *mddev, const char *buf, size_t len)
{
int major, minor;
char *e;
/* Changing the details of 'external' metadata is
* always permitted. Otherwise there must be
* no devices attached to the array.
*/
if (mddev->external && strncmp(buf, "external:", 9) == 0)
;
else if (!list_empty(&mddev->disks))
return -EBUSY;
if (cmd_match(buf, "none")) {
mddev->persistent = 0;
mddev->external = 0;
mddev->major_version = 0;
mddev->minor_version = 90;
return len;
}
if (strncmp(buf, "external:", 9) == 0) {
size_t namelen = len-9;
if (namelen >= sizeof(mddev->metadata_type))
namelen = sizeof(mddev->metadata_type)-1;
strncpy(mddev->metadata_type, buf+9, namelen);
mddev->metadata_type[namelen] = 0;
if (namelen && mddev->metadata_type[namelen-1] == '\n')
mddev->metadata_type[--namelen] = 0;
mddev->persistent = 0;
mddev->external = 1;
mddev->major_version = 0;
mddev->minor_version = 90;
return len;
}
major = simple_strtoul(buf, &e, 10);
if (e==buf || *e != '.')
return -EINVAL;
buf = e+1;
minor = simple_strtoul(buf, &e, 10);
if (e==buf || (*e && *e != '\n') )
return -EINVAL;
if (major >= ARRAY_SIZE(super_types) || super_types[major].name == NULL)
return -ENOENT;
mddev->major_version = major;
mddev->minor_version = minor;
mddev->persistent = 1;
mddev->external = 0;
return len;
}
static struct md_sysfs_entry md_metadata =
__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
static ssize_t
action_show(mddev_t *mddev, char *page)
{
char *type = "idle";
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
(!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) {
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
type = "reshape";
else if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
type = "resync";
else if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
type = "check";
else
type = "repair";
} else if (test_bit(MD_RECOVERY_RECOVER, &mddev->recovery))
type = "recover";
}
return sprintf(page, "%s\n", type);
}
static ssize_t
action_store(mddev_t *mddev, const char *page, size_t len)
{
if (!mddev->pers || !mddev->pers->sync_request)
return -EINVAL;
if (cmd_match(page, "idle")) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
mddev->recovery = 0;
}
} else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return -EBUSY;
else if (cmd_match(page, "resync"))
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
else if (cmd_match(page, "recover")) {
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
} else if (cmd_match(page, "reshape")) {
int err;
if (mddev->pers->start_reshape == NULL)
return -EINVAL;
err = mddev->pers->start_reshape(mddev);
if (err)
return err;
sysfs_notify(&mddev->kobj, NULL, "degraded");
} else {
if (cmd_match(page, "check"))
set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
else if (!cmd_match(page, "repair"))
return -EINVAL;
set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
sysfs_notify_dirent(mddev->sysfs_action);
return len;
}
static ssize_t
mismatch_cnt_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long) mddev->resync_mismatches);
}
static struct md_sysfs_entry md_scan_mode =
__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
static struct md_sysfs_entry md_mismatches = __ATTR_RO(mismatch_cnt);
static ssize_t
sync_min_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%d (%s)\n", speed_min(mddev),
mddev->sync_speed_min ? "local": "system");
}
static ssize_t
sync_min_store(mddev_t *mddev, const char *buf, size_t len)
{
int min;
char *e;
if (strncmp(buf, "system", 6)==0) {
mddev->sync_speed_min = 0;
return len;
}
min = simple_strtoul(buf, &e, 10);
if (buf == e || (*e && *e != '\n') || min <= 0)
return -EINVAL;
mddev->sync_speed_min = min;
return len;
}
static struct md_sysfs_entry md_sync_min =
__ATTR(sync_speed_min, S_IRUGO|S_IWUSR, sync_min_show, sync_min_store);
static ssize_t
sync_max_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%d (%s)\n", speed_max(mddev),
mddev->sync_speed_max ? "local": "system");
}
static ssize_t
sync_max_store(mddev_t *mddev, const char *buf, size_t len)
{
int max;
char *e;
if (strncmp(buf, "system", 6)==0) {
mddev->sync_speed_max = 0;
return len;
}
max = simple_strtoul(buf, &e, 10);
if (buf == e || (*e && *e != '\n') || max <= 0)
return -EINVAL;
mddev->sync_speed_max = max;
return len;
}
static struct md_sysfs_entry md_sync_max =
__ATTR(sync_speed_max, S_IRUGO|S_IWUSR, sync_max_show, sync_max_store);
static ssize_t
degraded_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%d\n", mddev->degraded);
}
static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded);
static ssize_t
sync_force_parallel_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%d\n", mddev->parallel_resync);
}
static ssize_t
sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len)
{
long n;
if (strict_strtol(buf, 10, &n))
return -EINVAL;
if (n != 0 && n != 1)
return -EINVAL;
mddev->parallel_resync = n;
if (mddev->sync_thread)
wake_up(&resync_wait);
return len;
}
/* force parallel resync, even with shared block devices */
static struct md_sysfs_entry md_sync_force_parallel =
__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR,
sync_force_parallel_show, sync_force_parallel_store);
static ssize_t
sync_speed_show(mddev_t *mddev, char *page)
{
unsigned long resync, dt, db;
if (mddev->curr_resync == 0)
return sprintf(page, "none\n");
resync = mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active);
dt = (jiffies - mddev->resync_mark) / HZ;
if (!dt) dt++;
db = resync - mddev->resync_mark_cnt;
return sprintf(page, "%lu\n", db/dt/2); /* K/sec */
}
static struct md_sysfs_entry md_sync_speed = __ATTR_RO(sync_speed);
static ssize_t
sync_completed_show(mddev_t *mddev, char *page)
{
unsigned long max_sectors, resync;
if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return sprintf(page, "none\n");
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
else
max_sectors = mddev->dev_sectors;
resync = mddev->curr_resync_completed;
return sprintf(page, "%lu / %lu\n", resync, max_sectors);
}
static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed);
static ssize_t
min_sync_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long)mddev->resync_min);
}
static ssize_t
min_sync_store(mddev_t *mddev, const char *buf, size_t len)
{
unsigned long long min;
if (strict_strtoull(buf, 10, &min))
return -EINVAL;
if (min > mddev->resync_max)
return -EINVAL;
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
/* Must be a multiple of chunk_size */
if (mddev->chunk_size) {
if (min & (sector_t)((mddev->chunk_size>>9)-1))
return -EINVAL;
}
mddev->resync_min = min;
return len;
}
static struct md_sysfs_entry md_min_sync =
__ATTR(sync_min, S_IRUGO|S_IWUSR, min_sync_show, min_sync_store);
static ssize_t
max_sync_show(mddev_t *mddev, char *page)
{
if (mddev->resync_max == MaxSector)
return sprintf(page, "max\n");
else
return sprintf(page, "%llu\n",
(unsigned long long)mddev->resync_max);
}
static ssize_t
max_sync_store(mddev_t *mddev, const char *buf, size_t len)
{
if (strncmp(buf, "max", 3) == 0)
mddev->resync_max = MaxSector;
else {
unsigned long long max;
if (strict_strtoull(buf, 10, &max))
return -EINVAL;
if (max < mddev->resync_min)
return -EINVAL;
if (max < mddev->resync_max &&
test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
/* Must be a multiple of chunk_size */
if (mddev->chunk_size) {
if (max & (sector_t)((mddev->chunk_size>>9)-1))
return -EINVAL;
}
mddev->resync_max = max;
}
wake_up(&mddev->recovery_wait);
return len;
}
static struct md_sysfs_entry md_max_sync =
__ATTR(sync_max, S_IRUGO|S_IWUSR, max_sync_show, max_sync_store);
static ssize_t
suspend_lo_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%llu\n", (unsigned long long)mddev->suspend_lo);
}
static ssize_t
suspend_lo_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
if (mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
if (new >= mddev->suspend_hi ||
(new > mddev->suspend_lo && new < mddev->suspend_hi)) {
mddev->suspend_lo = new;
mddev->pers->quiesce(mddev, 2);
return len;
} else
return -EINVAL;
}
static struct md_sysfs_entry md_suspend_lo =
__ATTR(suspend_lo, S_IRUGO|S_IWUSR, suspend_lo_show, suspend_lo_store);
static ssize_t
suspend_hi_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%llu\n", (unsigned long long)mddev->suspend_hi);
}
static ssize_t
suspend_hi_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
if (mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
if ((new <= mddev->suspend_lo && mddev->suspend_lo >= mddev->suspend_hi) ||
(new > mddev->suspend_lo && new > mddev->suspend_hi)) {
mddev->suspend_hi = new;
mddev->pers->quiesce(mddev, 1);
mddev->pers->quiesce(mddev, 0);
return len;
} else
return -EINVAL;
}
static struct md_sysfs_entry md_suspend_hi =
__ATTR(suspend_hi, S_IRUGO|S_IWUSR, suspend_hi_show, suspend_hi_store);
static ssize_t
reshape_position_show(mddev_t *mddev, char *page)
{
if (mddev->reshape_position != MaxSector)
return sprintf(page, "%llu\n",
(unsigned long long)mddev->reshape_position);
strcpy(page, "none\n");
return 5;
}
static ssize_t
reshape_position_store(mddev_t *mddev, const char *buf, size_t len)
{
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
if (mddev->pers)
return -EBUSY;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
mddev->reshape_position = new;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk = mddev->chunk_size;
return len;
}
static struct md_sysfs_entry md_reshape_position =
__ATTR(reshape_position, S_IRUGO|S_IWUSR, reshape_position_show,
reshape_position_store);
static ssize_t
array_size_show(mddev_t *mddev, char *page)
{
if (mddev->external_size)
return sprintf(page, "%llu\n",
(unsigned long long)mddev->array_sectors/2);
else
return sprintf(page, "default\n");
}
static ssize_t
array_size_store(mddev_t *mddev, const char *buf, size_t len)
{
sector_t sectors;
if (strncmp(buf, "default", 7) == 0) {
if (mddev->pers)
sectors = mddev->pers->size(mddev, 0, 0);
else
sectors = mddev->array_sectors;
mddev->external_size = 0;
} else {
if (strict_blocks_to_sectors(buf, &sectors) < 0)
return -EINVAL;
if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors)
return -E2BIG;
mddev->external_size = 1;
}
mddev->array_sectors = sectors;
set_capacity(mddev->gendisk, mddev->array_sectors);
if (mddev->pers) {
struct block_device *bdev = bdget_disk(mddev->gendisk, 0);
if (bdev) {
mutex_lock(&bdev->bd_inode->i_mutex);
i_size_write(bdev->bd_inode,
(loff_t)mddev->array_sectors << 9);
mutex_unlock(&bdev->bd_inode->i_mutex);
bdput(bdev);
}
}
return len;
}
static struct md_sysfs_entry md_array_size =
__ATTR(array_size, S_IRUGO|S_IWUSR, array_size_show,
array_size_store);
static struct attribute *md_default_attrs[] = {
&md_level.attr,
&md_layout.attr,
&md_raid_disks.attr,
&md_chunk_size.attr,
&md_size.attr,
&md_resync_start.attr,
&md_metadata.attr,
&md_new_device.attr,
&md_safe_delay.attr,
&md_array_state.attr,
&md_reshape_position.attr,
&md_array_size.attr,
NULL,
};
static struct attribute *md_redundancy_attrs[] = {
&md_scan_mode.attr,
&md_mismatches.attr,
&md_sync_min.attr,
&md_sync_max.attr,
&md_sync_speed.attr,
&md_sync_force_parallel.attr,
&md_sync_completed.attr,
&md_min_sync.attr,
&md_max_sync.attr,
&md_suspend_lo.attr,
&md_suspend_hi.attr,
&md_bitmap.attr,
&md_degraded.attr,
NULL,
};
static struct attribute_group md_redundancy_group = {
.name = NULL,
.attrs = md_redundancy_attrs,
};
static ssize_t
md_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
{
struct md_sysfs_entry *entry = container_of(attr, struct md_sysfs_entry, attr);
mddev_t *mddev = container_of(kobj, struct mddev_s, kobj);
ssize_t rv;
if (!entry->show)
return -EIO;
rv = mddev_lock(mddev);
if (!rv) {
rv = entry->show(mddev, page);
mddev_unlock(mddev);
}
return rv;
}
static ssize_t
md_attr_store(struct kobject *kobj, struct attribute *attr,
const char *page, size_t length)
{
struct md_sysfs_entry *entry = container_of(attr, struct md_sysfs_entry, attr);
mddev_t *mddev = container_of(kobj, struct mddev_s, kobj);
ssize_t rv;
if (!entry->store)
return -EIO;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
rv = mddev_lock(mddev);
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
if (mddev->hold_active == UNTIL_IOCTL)
mddev->hold_active = 0;
if (!rv) {
rv = entry->store(mddev, page, length);
mddev_unlock(mddev);
}
return rv;
}
static void md_free(struct kobject *ko)
{
mddev_t *mddev = container_of(ko, mddev_t, kobj);
if (mddev->sysfs_state)
sysfs_put(mddev->sysfs_state);
if (mddev->gendisk) {
del_gendisk(mddev->gendisk);
put_disk(mddev->gendisk);
}
if (mddev->queue)
blk_cleanup_queue(mddev->queue);
kfree(mddev);
}
static struct sysfs_ops md_sysfs_ops = {
.show = md_attr_show,
.store = md_attr_store,
};
static struct kobj_type md_ktype = {
.release = md_free,
.sysfs_ops = &md_sysfs_ops,
.default_attrs = md_default_attrs,
};
int mdp_major = 0;
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 15:57:25 +08:00
static void mddev_delayed_delete(struct work_struct *ws)
{
mddev_t *mddev = container_of(ws, mddev_t, del_work);
if (mddev->private == &md_redundancy_group) {
sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
if (mddev->sysfs_action)
sysfs_put(mddev->sysfs_action);
mddev->sysfs_action = NULL;
mddev->private = NULL;
}
kobject_del(&mddev->kobj);
kobject_put(&mddev->kobj);
}
static int md_alloc(dev_t dev, char *name)
{
static DEFINE_MUTEX(disks_mutex);
mddev_t *mddev = mddev_find(dev);
struct gendisk *disk;
int partitioned;
int shift;
int unit;
int error;
if (!mddev)
return -ENODEV;
partitioned = (MAJOR(mddev->unit) != MD_MAJOR);
shift = partitioned ? MdpMinorShift : 0;
unit = MINOR(mddev->unit) >> shift;
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
/* wait for any previous instance if this device
* to be completed removed (mddev_delayed_delete).
*/
flush_scheduled_work();
mutex_lock(&disks_mutex);
if (mddev->gendisk) {
mutex_unlock(&disks_mutex);
mddev_put(mddev);
return -EEXIST;
}
if (name) {
/* Need to ensure that 'name' is not a duplicate.
*/
mddev_t *mddev2;
spin_lock(&all_mddevs_lock);
list_for_each_entry(mddev2, &all_mddevs, all_mddevs)
if (mddev2->gendisk &&
strcmp(mddev2->gendisk->disk_name, name) == 0) {
spin_unlock(&all_mddevs_lock);
return -EEXIST;
}
spin_unlock(&all_mddevs_lock);
}
mddev->queue = blk_alloc_queue(GFP_KERNEL);
if (!mddev->queue) {
mutex_unlock(&disks_mutex);
mddev_put(mddev);
return -ENOMEM;
}
mddev->queue->queuedata = mddev;
/* Can be unlocked because the queue is new: no concurrency */
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue);
blk_queue_make_request(mddev->queue, md_make_request);
disk = alloc_disk(1 << shift);
if (!disk) {
mutex_unlock(&disks_mutex);
blk_cleanup_queue(mddev->queue);
mddev->queue = NULL;
mddev_put(mddev);
return -ENOMEM;
}
disk->major = MAJOR(mddev->unit);
disk->first_minor = unit << shift;
if (name)
strcpy(disk->disk_name, name);
else if (partitioned)
sprintf(disk->disk_name, "md_d%d", unit);
else
sprintf(disk->disk_name, "md%d", unit);
disk->fops = &md_fops;
disk->private_data = mddev;
disk->queue = mddev->queue;
/* Allow extended partitions. This makes the
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
* 'mdp' device redundant, but we can't really
* remove it now.
*/
disk->flags |= GENHD_FL_EXT_DEVT;
add_disk(disk);
mddev->gendisk = disk;
error = kobject_init_and_add(&mddev->kobj, &md_ktype,
&disk_to_dev(disk)->kobj, "%s", "md");
mutex_unlock(&disks_mutex);
if (error)
printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
disk->disk_name);
else {
kobject_uevent(&mddev->kobj, KOBJ_ADD);
mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state");
}
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
mddev_put(mddev);
return 0;
}
static struct kobject *md_probe(dev_t dev, int *part, void *data)
{
md_alloc(dev, NULL);
return NULL;
}
static int add_named_array(const char *val, struct kernel_param *kp)
{
/* val must be "md_*" where * is not all digits.
* We allocate an array with a large free minor number, and
* set the name to val. val must not already be an active name.
*/
int len = strlen(val);
char buf[DISK_NAME_LEN];
while (len && val[len-1] == '\n')
len--;
if (len >= DISK_NAME_LEN)
return -E2BIG;
strlcpy(buf, val, len+1);
if (strncmp(buf, "md_", 3) != 0)
return -EINVAL;
return md_alloc(0, buf);
}
static void md_safemode_timeout(unsigned long data)
{
mddev_t *mddev = (mddev_t *) data;
if (!atomic_read(&mddev->writes_pending)) {
mddev->safemode = 1;
if (mddev->external)
sysfs_notify_dirent(mddev->sysfs_state);
}
md_wakeup_thread(mddev->thread);
}
static int start_dirty_degraded;
static int do_md_run(mddev_t * mddev)
{
int err;
int chunk_size;
mdk_rdev_t *rdev;
struct gendisk *disk;
struct mdk_personality *pers;
char b[BDEVNAME_SIZE];
if (list_empty(&mddev->disks))
/* cannot run an array with no devices.. */
return -EINVAL;
if (mddev->pers)
return -EBUSY;
/*
* Analyze all RAID superblock(s)
*/
if (!mddev->raid_disks) {
if (!mddev->persistent)
return -EINVAL;
analyze_sbs(mddev);
}
chunk_size = mddev->chunk_size;
if (chunk_size) {
if (chunk_size > MAX_CHUNK_SIZE) {
printk(KERN_ERR "too big chunk_size: %d > %d\n",
chunk_size, MAX_CHUNK_SIZE);
return -EINVAL;
}
/*
* chunk-size has to be a power of 2
*/
if ( (1 << ffz(~chunk_size)) != chunk_size) {
printk(KERN_ERR "chunk_size of %d not valid\n", chunk_size);
return -EINVAL;
}
/* devices must have minimum size of one chunk */
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (test_bit(Faulty, &rdev->flags))
continue;
if (rdev->sectors < chunk_size / 512) {
printk(KERN_WARNING
"md: Dev %s smaller than chunk_size:"
" %llu < %d\n",
bdevname(rdev->bdev,b),
(unsigned long long)rdev->sectors,
chunk_size / 512);
return -EINVAL;
}
}
}
if (mddev->level != LEVEL_NONE)
request_module("md-level-%d", mddev->level);
else if (mddev->clevel[0])
request_module("md-%s", mddev->clevel);
/*
* Drop all container device buffers, from now on
* the only valid external interface is through the md
* device.
*/
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (test_bit(Faulty, &rdev->flags))
continue;
sync_blockdev(rdev->bdev);
invalidate_bdev(rdev->bdev);
/* perform some consistency tests on the device.
* We don't want the data to overlap the metadata,
* Internal Bitmap issues have been handled elsewhere.
*/
if (rdev->data_offset < rdev->sb_start) {
if (mddev->dev_sectors &&
rdev->data_offset + mddev->dev_sectors
> rdev->sb_start) {
printk("md: %s: data overlaps metadata\n",
mdname(mddev));
return -EINVAL;
}
} else {
if (rdev->sb_start + rdev->sb_size/512
> rdev->data_offset) {
printk("md: %s: metadata overlaps data\n",
mdname(mddev));
return -EINVAL;
}
}
sysfs_notify_dirent(rdev->sysfs_state);
}
md_probe(mddev->unit, NULL, NULL);
disk = mddev->gendisk;
if (!disk)
return -ENOMEM;
spin_lock(&pers_lock);
pers = find_pers(mddev->level, mddev->clevel);
if (!pers || !try_module_get(pers->owner)) {
spin_unlock(&pers_lock);
if (mddev->level != LEVEL_NONE)
printk(KERN_WARNING "md: personality for level %d is not loaded!\n",
mddev->level);
else
printk(KERN_WARNING "md: personality for level %s is not loaded!\n",
mddev->clevel);
return -EINVAL;
}
mddev->pers = pers;
spin_unlock(&pers_lock);
if (mddev->level != pers->level) {
mddev->level = pers->level;
mddev->new_level = pers->level;
}
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (pers->level >= 4 && pers->level <= 6)
/* Cannot support integrity (yet) */
blk_integrity_unregister(mddev->gendisk);
if (mddev->reshape_position != MaxSector &&
pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
mddev->pers = NULL;
module_put(pers->owner);
return -EINVAL;
}
if (pers->sync_request) {
/* Warn if this is a potentially silly
* configuration.
*/
char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE];
mdk_rdev_t *rdev2;
int warned = 0;
list_for_each_entry(rdev, &mddev->disks, same_set)
list_for_each_entry(rdev2, &mddev->disks, same_set) {
if (rdev < rdev2 &&
rdev->bdev->bd_contains ==
rdev2->bdev->bd_contains) {
printk(KERN_WARNING
"%s: WARNING: %s appears to be"
" on the same physical disk as"
" %s.\n",
mdname(mddev),
bdevname(rdev->bdev,b),
bdevname(rdev2->bdev,b2));
warned = 1;
}
}
if (warned)
printk(KERN_WARNING
"True protection against single-disk"
" failure might be compromised.\n");
}
mddev->recovery = 0;
/* may be over-ridden by personality */
mddev->resync_max_sectors = mddev->dev_sectors;
2005-11-09 13:39:34 +08:00
mddev->barriers_work = 1;
mddev->ok_start_degraded = start_dirty_degraded;
if (start_readonly)
mddev->ro = 2; /* read-only, but switch on first write */
err = mddev->pers->run(mddev);
if (err)
printk(KERN_ERR "md: pers->run() failed ...\n");
else if (mddev->pers->size(mddev, 0, 0) < mddev->array_sectors) {
WARN_ONCE(!mddev->external_size, "%s: default size too small,"
" but 'external_size' not in effect?\n", __func__);
printk(KERN_ERR
"md: invalid array_size %llu > default size %llu\n",
(unsigned long long)mddev->array_sectors / 2,
(unsigned long long)mddev->pers->size(mddev, 0, 0) / 2);
err = -EINVAL;
mddev->pers->stop(mddev);
}
if (err == 0 && mddev->pers->sync_request) {
err = bitmap_create(mddev);
if (err) {
printk(KERN_ERR "%s: failed to create bitmap (%d)\n",
mdname(mddev), err);
mddev->pers->stop(mddev);
}
}
if (err) {
module_put(mddev->pers->owner);
mddev->pers = NULL;
bitmap_destroy(mddev);
return err;
}
if (mddev->pers->sync_request) {
if (sysfs_create_group(&mddev->kobj, &md_redundancy_group))
printk(KERN_WARNING
"md: cannot register extra attributes for %s\n",
mdname(mddev));
mddev->sysfs_action = sysfs_get_dirent(mddev->kobj.sd, "sync_action");
} else if (mddev->ro == 2) /* auto-readonly not meaningful */
mddev->ro = 0;
atomic_set(&mddev->writes_pending,0);
mddev->safemode = 0;
mddev->safemode_timer.function = md_safemode_timeout;
mddev->safemode_timer.data = (unsigned long) mddev;
mddev->safemode_delay = (200 * HZ)/1000 +1; /* 200 msec delay */
mddev->in_sync = 1;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0) {
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
printk("md: cannot register %s for %s\n",
nm, mdname(mddev));
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
if (mddev->flags)
md_update_sb(mddev, 0);
set_capacity(disk, mddev->array_sectors);
/* If there is a partially-recovered drive we need to
* start recovery here. If we leave it to md_check_recovery,
* it will remove the drives and not do the right thing
*/
if (mddev->degraded && !mddev->sync_thread) {
int spares = 0;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
!test_bit(Faulty, &rdev->flags))
/* complete an interrupted recovery */
spares++;
if (spares && mddev->pers->sync_request) {
mddev->recovery = 0;
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync,
mddev,
"%s_resync");
if (!mddev->sync_thread) {
printk(KERN_ERR "%s: could not start resync"
" thread...\n",
mdname(mddev));
/* leave the spares where they are, it shouldn't hurt */
mddev->recovery = 0;
}
}
}
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
mddev->changed = 1;
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
if (mddev->sysfs_action)
sysfs_notify_dirent(mddev->sysfs_action);
sysfs_notify(&mddev->kobj, NULL, "degraded");
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
return 0;
}
static int restart_array(mddev_t *mddev)
{
struct gendisk *disk = mddev->gendisk;
/* Complain if it has no devices */
if (list_empty(&mddev->disks))
return -ENXIO;
if (!mddev->pers)
return -EINVAL;
if (!mddev->ro)
return -EBUSY;
mddev->safemode = 0;
mddev->ro = 0;
set_disk_ro(disk, 0);
printk(KERN_INFO "md: %s switched to read-write mode.\n",
mdname(mddev));
/* Kick recovery or resync if necessary */
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread);
sysfs_notify_dirent(mddev->sysfs_state);
return 0;
}
/* similar to deny_write_access, but accounts for our holding a reference
* to the file ourselves */
static int deny_bitmap_write_access(struct file * file)
{
struct inode *inode = file->f_mapping->host;
spin_lock(&inode->i_lock);
if (atomic_read(&inode->i_writecount) > 1) {
spin_unlock(&inode->i_lock);
return -ETXTBSY;
}
atomic_set(&inode->i_writecount, -1);
spin_unlock(&inode->i_lock);
return 0;
}
static void restore_bitmap_write_access(struct file *file)
{
struct inode *inode = file->f_mapping->host;
spin_lock(&inode->i_lock);
atomic_set(&inode->i_writecount, 1);
spin_unlock(&inode->i_lock);
}
/* mode:
* 0 - completely stop and dis-assemble array
* 1 - switch to readonly
* 2 - stop but do not disassemble array
*/
static int do_md_stop(mddev_t * mddev, int mode, int is_open)
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
return -EBUSY;
}
if (mddev->pers) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
}
del_timer_sync(&mddev->safemode_timer);
switch(mode) {
case 1: /* readonly */
err = -ENXIO;
if (mddev->ro==1)
goto out;
mddev->ro = 1;
break;
case 0: /* disassemble */
case 2: /* stop */
bitmap_flush(mddev);
2005-11-09 13:39:34 +08:00
md_super_wait(mddev);
if (mddev->ro)
set_disk_ro(disk, 0);
mddev->pers->stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
module_put(mddev->pers->owner);
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 15:57:25 +08:00
if (mddev->pers->sync_request)
mddev->private = &md_redundancy_group;
mddev->pers = NULL;
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0) {
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
sysfs_remove_link(&mddev->kobj, nm);
}
set_capacity(disk, 0);
mddev->changed = 1;
if (mddev->ro)
mddev->ro = 0;
}
if (!mddev->in_sync || mddev->flags) {
/* mark array as shutdown cleanly */
mddev->in_sync = 1;
md_update_sb(mddev, 1);
}
if (mode == 1)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
/*
* Free resources if final stop
*/
if (mode == 0) {
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
bitmap_destroy(mddev);
if (mddev->bitmap_file) {
restore_bitmap_write_access(mddev->bitmap_file);
fput(mddev->bitmap_file);
mddev->bitmap_file = NULL;
}
mddev->bitmap_offset = 0;
/* make sure all md_delayed_delete calls have finished */
flush_scheduled_work();
export_array(mddev);
mddev->array_sectors = 0;
mddev->external_size = 0;
mddev->dev_sectors = 0;
mddev->raid_disks = 0;
mddev->recovery_cp = 0;
mddev->resync_min = 0;
mddev->resync_max = MaxSector;
mddev->reshape_position = MaxSector;
mddev->external = 0;
mddev->persistent = 0;
mddev->level = LEVEL_NONE;
mddev->clevel[0] = 0;
mddev->flags = 0;
mddev->ro = 0;
mddev->metadata_type[0] = 0;
mddev->chunk_size = 0;
mddev->ctime = mddev->utime = 0;
mddev->layout = 0;
mddev->max_disks = 0;
mddev->events = 0;
mddev->delta_disks = 0;
mddev->new_level = LEVEL_NONE;
mddev->new_layout = 0;
mddev->new_chunk = 0;
mddev->curr_resync = 0;
mddev->resync_mismatches = 0;
mddev->suspend_lo = mddev->suspend_hi = 0;
mddev->sync_speed_min = mddev->sync_speed_max = 0;
mddev->recovery = 0;
mddev->in_sync = 0;
mddev->changed = 0;
mddev->degraded = 0;
mddev->barriers_work = 0;
mddev->safemode = 0;
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
} else if (mddev->pers)
printk(KERN_INFO "md: %s switched to read-only mode.\n",
mdname(mddev));
err = 0;
blk_integrity_unregister(disk);
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
out:
return err;
}
#ifndef MODULE
static void autorun_array(mddev_t *mddev)
{
mdk_rdev_t *rdev;
int err;
if (list_empty(&mddev->disks))
return;
printk(KERN_INFO "md: running: ");
list_for_each_entry(rdev, &mddev->disks, same_set) {
char b[BDEVNAME_SIZE];
printk("<%s>", bdevname(rdev->bdev,b));
}
printk("\n");
err = do_md_run(mddev);
if (err) {
printk(KERN_WARNING "md: do_md_run() returned %d\n", err);
do_md_stop(mddev, 0, 0);
}
}
/*
* lets try to run arrays based on all disks that have arrived
* until now. (those are in pending_raid_disks)
*
* the method: pick the first pending disk, collect all disks with
* the same UUID, remove all from the pending list and put them into
* the 'same_array' list. Then order this list based on superblock
* update time (freshest comes first), kick out 'old' disks and
* compare superblocks. If everything's fine then run it.
*
* If "unit" is allocated, then bump its reference count
*/
static void autorun_devices(int part)
{
mdk_rdev_t *rdev0, *rdev, *tmp;
mddev_t *mddev;
char b[BDEVNAME_SIZE];
printk(KERN_INFO "md: autorun ...\n");
while (!list_empty(&pending_raid_disks)) {
int unit;
dev_t dev;
LIST_HEAD(candidates);
rdev0 = list_entry(pending_raid_disks.next,
mdk_rdev_t, same_set);
printk(KERN_INFO "md: considering %s ...\n",
bdevname(rdev0->bdev,b));
INIT_LIST_HEAD(&candidates);
rdev_for_each_list(rdev, tmp, &pending_raid_disks)
if (super_90_load(rdev, rdev0, 0) >= 0) {
printk(KERN_INFO "md: adding %s ...\n",
bdevname(rdev->bdev,b));
list_move(&rdev->same_set, &candidates);
}
/*
* now we have a set of devices, with all of them having
* mostly sane superblocks. It's time to allocate the
* mddev.
*/
if (part) {
dev = MKDEV(mdp_major,
rdev0->preferred_minor << MdpMinorShift);
unit = MINOR(dev) >> MdpMinorShift;
} else {
dev = MKDEV(MD_MAJOR, rdev0->preferred_minor);
unit = MINOR(dev);
}
if (rdev0->preferred_minor != unit) {
printk(KERN_INFO "md: unit number in %s is bad: %d\n",
bdevname(rdev0->bdev, b), rdev0->preferred_minor);
break;
}
md_probe(dev, NULL, NULL);
mddev = mddev_find(dev);
if (!mddev || !mddev->gendisk) {
if (mddev)
mddev_put(mddev);
printk(KERN_ERR
"md: cannot allocate memory for md drive.\n");
break;
}
if (mddev_lock(mddev))
printk(KERN_WARNING "md: %s locked, cannot run\n",
mdname(mddev));
else if (mddev->raid_disks || mddev->major_version
|| !list_empty(&mddev->disks)) {
printk(KERN_WARNING
"md: %s already running, cannot run %s\n",
mdname(mddev), bdevname(rdev0->bdev,b));
mddev_unlock(mddev);
} else {
printk(KERN_INFO "md: created %s\n", mdname(mddev));
mddev->persistent = 1;
rdev_for_each_list(rdev, tmp, &candidates) {
list_del_init(&rdev->same_set);
if (bind_rdev_to_array(rdev, mddev))
export_rdev(rdev);
}
autorun_array(mddev);
mddev_unlock(mddev);
}
/* on success, candidates will be empty, on error
* it won't...
*/
rdev_for_each_list(rdev, tmp, &candidates) {
list_del_init(&rdev->same_set);
export_rdev(rdev);
}
mddev_put(mddev);
}
printk(KERN_INFO "md: ... autorun DONE.\n");
}
#endif /* !MODULE */
static int get_version(void __user * arg)
{
mdu_version_t ver;
ver.major = MD_MAJOR_VERSION;
ver.minor = MD_MINOR_VERSION;
ver.patchlevel = MD_PATCHLEVEL_VERSION;
if (copy_to_user(arg, &ver, sizeof(ver)))
return -EFAULT;
return 0;
}
static int get_array_info(mddev_t * mddev, void __user * arg)
{
mdu_array_info_t info;
int nr,working,active,failed,spare;
mdk_rdev_t *rdev;
nr=working=active=failed=spare=0;
list_for_each_entry(rdev, &mddev->disks, same_set) {
nr++;
if (test_bit(Faulty, &rdev->flags))
failed++;
else {
working++;
if (test_bit(In_sync, &rdev->flags))
active++;
else
spare++;
}
}
info.major_version = mddev->major_version;
info.minor_version = mddev->minor_version;
info.patch_version = MD_PATCHLEVEL_VERSION;
info.ctime = mddev->ctime;
info.level = mddev->level;
info.size = mddev->dev_sectors / 2;
if (info.size != mddev->dev_sectors / 2) /* overflow */
info.size = -1;
info.nr_disks = nr;
info.raid_disks = mddev->raid_disks;
info.md_minor = mddev->md_minor;
info.not_persistent= !mddev->persistent;
info.utime = mddev->utime;
info.state = 0;
if (mddev->in_sync)
info.state = (1<<MD_SB_CLEAN);
if (mddev->bitmap && mddev->bitmap_offset)
info.state = (1<<MD_SB_BITMAP_PRESENT);
info.active_disks = active;
info.working_disks = working;
info.failed_disks = failed;
info.spare_disks = spare;
info.layout = mddev->layout;
info.chunk_size = mddev->chunk_size;
if (copy_to_user(arg, &info, sizeof(info)))
return -EFAULT;
return 0;
}
static int get_bitmap_file(mddev_t * mddev, void __user * arg)
{
mdu_bitmap_file_t *file = NULL; /* too big for stack allocation */
char *ptr, *buf = NULL;
int err = -ENOMEM;
if (md_allow_write(mddev))
file = kmalloc(sizeof(*file), GFP_NOIO);
else
file = kmalloc(sizeof(*file), GFP_KERNEL);
if (!file)
goto out;
/* bitmap disabled, zero the first byte and copy out */
if (!mddev->bitmap || !mddev->bitmap->file) {
file->pathname[0] = '\0';
goto copy_out;
}
buf = kmalloc(sizeof(file->pathname), GFP_KERNEL);
if (!buf)
goto out;
ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname));
if (IS_ERR(ptr))
goto out;
strcpy(file->pathname, ptr);
copy_out:
err = 0;
if (copy_to_user(arg, file, sizeof(*file)))
err = -EFAULT;
out:
kfree(buf);
kfree(file);
return err;
}
static int get_disk_info(mddev_t * mddev, void __user * arg)
{
mdu_disk_info_t info;
mdk_rdev_t *rdev;
if (copy_from_user(&info, arg, sizeof(info)))
return -EFAULT;
rdev = find_rdev_nr(mddev, info.number);
if (rdev) {
info.major = MAJOR(rdev->bdev->bd_dev);
info.minor = MINOR(rdev->bdev->bd_dev);
info.raid_disk = rdev->raid_disk;
info.state = 0;
if (test_bit(Faulty, &rdev->flags))
info.state |= (1<<MD_DISK_FAULTY);
else if (test_bit(In_sync, &rdev->flags)) {
info.state |= (1<<MD_DISK_ACTIVE);
info.state |= (1<<MD_DISK_SYNC);
}
if (test_bit(WriteMostly, &rdev->flags))
info.state |= (1<<MD_DISK_WRITEMOSTLY);
} else {
info.major = info.minor = 0;
info.raid_disk = -1;
info.state = (1<<MD_DISK_REMOVED);
}
if (copy_to_user(arg, &info, sizeof(info)))
return -EFAULT;
return 0;
}
static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
{
char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE];
mdk_rdev_t *rdev;
dev_t dev = MKDEV(info->major,info->minor);
if (info->major != MAJOR(dev) || info->minor != MINOR(dev))
return -EOVERFLOW;
if (!mddev->raid_disks) {
int err;
/* expecting a device which has a superblock */
rdev = md_import_device(dev, mddev->major_version, mddev->minor_version);
if (IS_ERR(rdev)) {
printk(KERN_WARNING
"md: md_import_device returned %ld\n",
PTR_ERR(rdev));
return PTR_ERR(rdev);
}
if (!list_empty(&mddev->disks)) {
mdk_rdev_t *rdev0 = list_entry(mddev->disks.next,
mdk_rdev_t, same_set);
int err = super_types[mddev->major_version]
.load_super(rdev, rdev0, mddev->minor_version);
if (err < 0) {
printk(KERN_WARNING
"md: %s has different UUID to %s\n",
bdevname(rdev->bdev,b),
bdevname(rdev0->bdev,b2));
export_rdev(rdev);
return -EINVAL;
}
}
err = bind_rdev_to_array(rdev, mddev);
if (err)
export_rdev(rdev);
return err;
}
/*
* add_new_disk can be used once the array is assembled
* to add "hot spares". They must already have a superblock
* written
*/
if (mddev->pers) {
int err;
if (!mddev->pers->hot_add_disk) {
printk(KERN_WARNING
"%s: personality does not support diskops!\n",
mdname(mddev));
return -EINVAL;
}
if (mddev->persistent)
rdev = md_import_device(dev, mddev->major_version,
mddev->minor_version);
else
rdev = md_import_device(dev, -1, -1);
if (IS_ERR(rdev)) {
printk(KERN_WARNING
"md: md_import_device returned %ld\n",
PTR_ERR(rdev));
return PTR_ERR(rdev);
}
/* set save_raid_disk if appropriate */
if (!mddev->persistent) {
if (info->state & (1<<MD_DISK_SYNC) &&
info->raid_disk < mddev->raid_disks)
rdev->raid_disk = info->raid_disk;
else
rdev->raid_disk = -1;
} else
super_types[mddev->major_version].
validate_super(mddev, rdev);
rdev->saved_raid_disk = rdev->raid_disk;
clear_bit(In_sync, &rdev->flags); /* just to be sure */
if (info->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
else
clear_bit(WriteMostly, &rdev->flags);
rdev->raid_disk = -1;
err = bind_rdev_to_array(rdev, mddev);
if (!err && !mddev->pers->hot_remove_disk) {
/* If there is hot_add_disk but no hot_remove_disk
* then added disks for geometry changes,
* and should be added immediately.
*/
super_types[mddev->major_version].
validate_super(mddev, rdev);
err = mddev->pers->hot_add_disk(mddev, rdev);
if (err)
unbind_rdev_from_array(rdev);
}
if (err)
export_rdev(rdev);
else
sysfs_notify_dirent(rdev->sysfs_state);
md_update_sb(mddev, 1);
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
return err;
}
/* otherwise, add_new_disk is only allowed
* for major_version==0 superblocks
*/
if (mddev->major_version != 0) {
printk(KERN_WARNING "%s: ADD_NEW_DISK not supported\n",
mdname(mddev));
return -EINVAL;
}
if (!(info->state & (1<<MD_DISK_FAULTY))) {
int err;
rdev = md_import_device(dev, -1, 0);
if (IS_ERR(rdev)) {
printk(KERN_WARNING
"md: error, md_import_device() returned %ld\n",
PTR_ERR(rdev));
return PTR_ERR(rdev);
}
rdev->desc_nr = info->number;
if (info->raid_disk < mddev->raid_disks)
rdev->raid_disk = info->raid_disk;
else
rdev->raid_disk = -1;
if (rdev->raid_disk < mddev->raid_disks)
if (info->state & (1<<MD_DISK_SYNC))
set_bit(In_sync, &rdev->flags);
if (info->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
if (!mddev->persistent) {
printk(KERN_INFO "md: nonpersistent superblock ...\n");
rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
} else
rdev->sb_start = calc_dev_sboffset(rdev->bdev);
rdev->sectors = calc_num_sectors(rdev, mddev->chunk_size);
err = bind_rdev_to_array(rdev, mddev);
if (err) {
export_rdev(rdev);
return err;
}
}
return 0;
}
static int hot_remove_disk(mddev_t * mddev, dev_t dev)
{
char b[BDEVNAME_SIZE];
mdk_rdev_t *rdev;
rdev = find_rdev(mddev, dev);
if (!rdev)
return -ENXIO;
if (rdev->raid_disk >= 0)
goto busy;
kick_rdev_from_array(rdev);
md_update_sb(mddev, 1);
md_new_event(mddev);
return 0;
busy:
printk(KERN_WARNING "md: cannot remove active disk %s from %s ...\n",
bdevname(rdev->bdev,b), mdname(mddev));
return -EBUSY;
}
static int hot_add_disk(mddev_t * mddev, dev_t dev)
{
char b[BDEVNAME_SIZE];
int err;
mdk_rdev_t *rdev;
if (!mddev->pers)
return -ENODEV;
if (mddev->major_version != 0) {
printk(KERN_WARNING "%s: HOT_ADD may only be used with"
" version-0 superblocks.\n",
mdname(mddev));
return -EINVAL;
}
if (!mddev->pers->hot_add_disk) {
printk(KERN_WARNING
"%s: personality does not support diskops!\n",
mdname(mddev));
return -EINVAL;
}
rdev = md_import_device(dev, -1, 0);
if (IS_ERR(rdev)) {
printk(KERN_WARNING
"md: error, md_import_device() returned %ld\n",
PTR_ERR(rdev));
return -EINVAL;
}
if (mddev->persistent)
rdev->sb_start = calc_dev_sboffset(rdev->bdev);
else
rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
rdev->sectors = calc_num_sectors(rdev, mddev->chunk_size);
if (test_bit(Faulty, &rdev->flags)) {
printk(KERN_WARNING
"md: can not hot-add faulty %s disk to %s!\n",
bdevname(rdev->bdev,b), mdname(mddev));
err = -EINVAL;
goto abort_export;
}
clear_bit(In_sync, &rdev->flags);
rdev->desc_nr = -1;
rdev->saved_raid_disk = -1;
err = bind_rdev_to_array(rdev, mddev);
if (err)
goto abort_export;
/*
* The rest should better be atomic, we can have disk failures
* noticed in interrupt contexts ...
*/
rdev->raid_disk = -1;
md_update_sb(mddev, 1);
/*
* Kick recovery, maybe this spare has to be added to the
* array immediately.
*/
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_new_event(mddev);
return 0;
abort_export:
export_rdev(rdev);
return err;
}
static int set_bitmap_file(mddev_t *mddev, int fd)
{
int err;
if (mddev->pers) {
if (!mddev->pers->quiesce)
return -EBUSY;
if (mddev->recovery || mddev->sync_thread)
return -EBUSY;
/* we should be able to change the bitmap.. */
}
if (fd >= 0) {
if (mddev->bitmap)
return -EEXIST; /* cannot add when bitmap is present */
mddev->bitmap_file = fget(fd);
if (mddev->bitmap_file == NULL) {
printk(KERN_ERR "%s: error: failed to get bitmap file\n",
mdname(mddev));
return -EBADF;
}
err = deny_bitmap_write_access(mddev->bitmap_file);
if (err) {
printk(KERN_ERR "%s: error: bitmap file is already in use\n",
mdname(mddev));
fput(mddev->bitmap_file);
mddev->bitmap_file = NULL;
return err;
}
mddev->bitmap_offset = 0; /* file overrides offset */
} else if (mddev->bitmap == NULL)
return -ENOENT; /* cannot remove what isn't there */
err = 0;
if (mddev->pers) {
mddev->pers->quiesce(mddev, 1);
if (fd >= 0)
err = bitmap_create(mddev);
if (fd < 0 || err) {
bitmap_destroy(mddev);
fd = -1; /* make sure to put the file */
}
mddev->pers->quiesce(mddev, 0);
}
if (fd < 0) {
if (mddev->bitmap_file) {
restore_bitmap_write_access(mddev->bitmap_file);
fput(mddev->bitmap_file);
}
mddev->bitmap_file = NULL;
}
return err;
}
/*
* set_array_info is used two different ways
* The original usage is when creating a new array.
* In this usage, raid_disks is > 0 and it together with
* level, size, not_persistent,layout,chunksize determine the
* shape of the array.
* This will always create an array with a type-0.90.0 superblock.
* The newer usage is when assembling an array.
* In this case raid_disks will be 0, and the major_version field is
* use to determine which style super-blocks are to be found on the devices.
* The minor and patch _version numbers are also kept incase the
* super_block handler wishes to interpret them.
*/
static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
{
if (info->raid_disks == 0) {
/* just setting version number for superblock loading */
if (info->major_version < 0 ||
info->major_version >= ARRAY_SIZE(super_types) ||
super_types[info->major_version].name == NULL) {
/* maybe try to auto-load a module? */
printk(KERN_INFO
"md: superblock version %d not known\n",
info->major_version);
return -EINVAL;
}
mddev->major_version = info->major_version;
mddev->minor_version = info->minor_version;
mddev->patch_version = info->patch_version;
mddev->persistent = !info->not_persistent;
return 0;
}
mddev->major_version = MD_MAJOR_VERSION;
mddev->minor_version = MD_MINOR_VERSION;
mddev->patch_version = MD_PATCHLEVEL_VERSION;
mddev->ctime = get_seconds();
mddev->level = info->level;
mddev->clevel[0] = 0;
mddev->dev_sectors = 2 * (sector_t)info->size;
mddev->raid_disks = info->raid_disks;
/* don't set md_minor, it is determined by which /dev/md* was
* openned
*/
if (info->state & (1<<MD_SB_CLEAN))
mddev->recovery_cp = MaxSector;
else
mddev->recovery_cp = 0;
mddev->persistent = ! info->not_persistent;
mddev->external = 0;
mddev->layout = info->layout;
mddev->chunk_size = info->chunk_size;
mddev->max_disks = MD_SB_DISKS;
if (mddev->persistent)
mddev->flags = 0;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
mddev->bitmap_offset = 0;
mddev->reshape_position = MaxSector;
/*
* Generate a 128 bit UUID
*/
get_random_bytes(mddev->uuid, 16);
mddev->new_level = mddev->level;
mddev->new_chunk = mddev->chunk_size;
mddev->new_layout = mddev->layout;
mddev->delta_disks = 0;
return 0;
}
void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors)
{
WARN(!mddev_is_locked(mddev), "%s: unlocked mddev!\n", __func__);
if (mddev->external_size)
return;
mddev->array_sectors = array_sectors;
}
EXPORT_SYMBOL(md_set_array_sectors);
static int update_size(mddev_t *mddev, sector_t num_sectors)
{
mdk_rdev_t *rdev;
int rv;
int fit = (num_sectors == 0);
if (mddev->pers->resize == NULL)
return -EINVAL;
/* The "num_sectors" is the number of sectors of each device that
* is used. This can only make sense for arrays with redundancy.
* linear and raid0 always use whatever space is available. We can only
* consider changing this number if no resync or reconstruction is
* happening, and if the new size is acceptable. It must fit before the
* sb_start or, if that is <data_offset, it must fit before the size
* of each device. If num_sectors is zero, we find the largest size
* that fits.
*/
if (mddev->sync_thread)
return -EBUSY;
if (mddev->bitmap)
/* Sorry, cannot grow a bitmap yet, just remove it,
* grow, and re-add.
*/
return -EBUSY;
list_for_each_entry(rdev, &mddev->disks, same_set) {
sector_t avail = rdev->sectors;
if (fit && (num_sectors == 0 || num_sectors > avail))
num_sectors = avail;
if (avail < num_sectors)
return -ENOSPC;
}
rv = mddev->pers->resize(mddev, num_sectors);
if (!rv) {
struct block_device *bdev;
bdev = bdget_disk(mddev->gendisk, 0);
if (bdev) {
mutex_lock(&bdev->bd_inode->i_mutex);
i_size_write(bdev->bd_inode,
(loff_t)mddev->array_sectors << 9);
mutex_unlock(&bdev->bd_inode->i_mutex);
bdput(bdev);
}
}
return rv;
}
static int update_raid_disks(mddev_t *mddev, int raid_disks)
{
int rv;
/* change the number of raid disks */
if (mddev->pers->check_reshape == NULL)
return -EINVAL;
if (raid_disks <= 0 ||
raid_disks >= mddev->max_disks)
return -EINVAL;
if (mddev->sync_thread || mddev->reshape_position != MaxSector)
return -EBUSY;
mddev->delta_disks = raid_disks - mddev->raid_disks;
rv = mddev->pers->check_reshape(mddev);
return rv;
}
/*
* update_array_info is used to change the configuration of an
* on-line array.
* The version, ctime,level,size,raid_disks,not_persistent, layout,chunk_size
* fields in the info are checked against the array.
* Any differences that cannot be handled will cause an error.
* Normally, only one change can be managed at a time.
*/
static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
{
int rv = 0;
int cnt = 0;
int state = 0;
/* calculate expected state,ignoring low bits */
if (mddev->bitmap && mddev->bitmap_offset)
state |= (1 << MD_SB_BITMAP_PRESENT);
if (mddev->major_version != info->major_version ||
mddev->minor_version != info->minor_version ||
/* mddev->patch_version != info->patch_version || */
mddev->ctime != info->ctime ||
mddev->level != info->level ||
/* mddev->layout != info->layout || */
!mddev->persistent != info->not_persistent||
mddev->chunk_size != info->chunk_size ||
/* ignore bottom 8 bits of state, and allow SB_BITMAP_PRESENT to change */
((state^info->state) & 0xfffffe00)
)
return -EINVAL;
/* Check there is only one change */
if (info->size >= 0 && mddev->dev_sectors / 2 != info->size)
cnt++;
if (mddev->raid_disks != info->raid_disks)
cnt++;
if (mddev->layout != info->layout)
cnt++;
if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT))
cnt++;
if (cnt == 0)
return 0;
if (cnt > 1)
return -EINVAL;
if (mddev->layout != info->layout) {
/* Change layout
* we don't need to do anything at the md level, the
* personality will take care of it all.
*/
if (mddev->pers->reconfig == NULL)
return -EINVAL;
else
return mddev->pers->reconfig(mddev, info->layout, -1);
}
if (info->size >= 0 && mddev->dev_sectors / 2 != info->size)
rv = update_size(mddev, (sector_t)info->size * 2);
if (mddev->raid_disks != info->raid_disks)
rv = update_raid_disks(mddev, info->raid_disks);
if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) {
if (mddev->pers->quiesce == NULL)
return -EINVAL;
if (mddev->recovery || mddev->sync_thread)
return -EBUSY;
if (info->state & (1<<MD_SB_BITMAP_PRESENT)) {
/* add the bitmap */
if (mddev->bitmap)
return -EEXIST;
if (mddev->default_bitmap_offset == 0)
return -EINVAL;
mddev->bitmap_offset = mddev->default_bitmap_offset;
mddev->pers->quiesce(mddev, 1);
rv = bitmap_create(mddev);
if (rv)
bitmap_destroy(mddev);
mddev->pers->quiesce(mddev, 0);
} else {
/* remove the bitmap */
if (!mddev->bitmap)
return -ENOENT;
if (mddev->bitmap->file)
return -EINVAL;
mddev->pers->quiesce(mddev, 1);
bitmap_destroy(mddev);
mddev->pers->quiesce(mddev, 0);
mddev->bitmap_offset = 0;
}
}
md_update_sb(mddev, 1);
return rv;
}
static int set_disk_faulty(mddev_t *mddev, dev_t dev)
{
mdk_rdev_t *rdev;
if (mddev->pers == NULL)
return -ENODEV;
rdev = find_rdev(mddev, dev);
if (!rdev)
return -ENODEV;
md_error(mddev, rdev);
return 0;
}
/*
* We have a problem here : there is no easy way to give a CHS
* virtual geometry. We currently pretend that we have a 2 heads
* 4 sectors (with a BIG number of cylinders...). This drives
* dosfs just mad... ;-)
*/
static int md_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
mddev_t *mddev = bdev->bd_disk->private_data;
geo->heads = 2;
geo->sectors = 4;
geo->cylinders = get_capacity(mddev->gendisk) / 8;
return 0;
}
static int md_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
int err = 0;
void __user *argp = (void __user *)arg;
mddev_t *mddev = NULL;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
/*
* Commands dealing with the RAID driver but not any
* particular array:
*/
switch (cmd)
{
case RAID_VERSION:
err = get_version(argp);
goto done;
case PRINT_RAID_DEBUG:
err = 0;
md_print_devices();
goto done;
#ifndef MODULE
case RAID_AUTORUN:
err = 0;
autostart_arrays(arg);
goto done;
#endif
default:;
}
/*
* Commands creating/starting a new array:
*/
mddev = bdev->bd_disk->private_data;
if (!mddev) {
BUG();
goto abort;
}
err = mddev_lock(mddev);
if (err) {
printk(KERN_INFO
"md: ioctl lock interrupted, reason %d, cmd %d\n",
err, cmd);
goto abort;
}
switch (cmd)
{
case SET_ARRAY_INFO:
{
mdu_array_info_t info;
if (!arg)
memset(&info, 0, sizeof(info));
else if (copy_from_user(&info, argp, sizeof(info))) {
err = -EFAULT;
goto abort_unlock;
}
if (mddev->pers) {
err = update_array_info(mddev, &info);
if (err) {
printk(KERN_WARNING "md: couldn't update"
" array info. %d\n", err);
goto abort_unlock;
}
goto done_unlock;
}
if (!list_empty(&mddev->disks)) {
printk(KERN_WARNING
"md: array %s already has disks!\n",
mdname(mddev));
err = -EBUSY;
goto abort_unlock;
}
if (mddev->raid_disks) {
printk(KERN_WARNING
"md: array %s already initialised!\n",
mdname(mddev));
err = -EBUSY;
goto abort_unlock;
}
err = set_array_info(mddev, &info);
if (err) {
printk(KERN_WARNING "md: couldn't set"
" array info. %d\n", err);
goto abort_unlock;
}
}
goto done_unlock;
default:;
}
/*
* Commands querying/configuring an existing array:
*/
/* if we are not initialised yet, only ADD_NEW_DISK, STOP_ARRAY,
* RUN_ARRAY, and GET_ and SET_BITMAP_FILE are allowed */
if ((!mddev->raid_disks && !mddev->external)
&& cmd != ADD_NEW_DISK && cmd != STOP_ARRAY
&& cmd != RUN_ARRAY && cmd != SET_BITMAP_FILE
&& cmd != GET_BITMAP_FILE) {
err = -ENODEV;
goto abort_unlock;
}
/*
* Commands even a read-only array can execute:
*/
switch (cmd)
{
case GET_ARRAY_INFO:
err = get_array_info(mddev, argp);
goto done_unlock;
case GET_BITMAP_FILE:
err = get_bitmap_file(mddev, argp);
goto done_unlock;
case GET_DISK_INFO:
err = get_disk_info(mddev, argp);
goto done_unlock;
case RESTART_ARRAY_RW:
err = restart_array(mddev);
goto done_unlock;
case STOP_ARRAY:
err = do_md_stop(mddev, 0, 1);
goto done_unlock;
case STOP_ARRAY_RO:
err = do_md_stop(mddev, 1, 1);
goto done_unlock;
}
/*
* The remaining ioctls are changing the state of the
* superblock, so we do not allow them on read-only arrays.
* However non-MD ioctls (e.g. get-size) will still come through
* here and hit the 'default' below, so only disallow
* 'md' ioctls, and switch to rw mode if started auto-readonly.
*/
if (_IOC_TYPE(cmd) == MD_MAJOR && mddev->ro && mddev->pers) {
if (mddev->ro == 2) {
mddev->ro = 0;
sysfs_notify_dirent(mddev->sysfs_state);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
} else {
err = -EROFS;
goto abort_unlock;
}
}
switch (cmd)
{
case ADD_NEW_DISK:
{
mdu_disk_info_t info;
if (copy_from_user(&info, argp, sizeof(info)))
err = -EFAULT;
else
err = add_new_disk(mddev, &info);
goto done_unlock;
}
case HOT_REMOVE_DISK:
err = hot_remove_disk(mddev, new_decode_dev(arg));
goto done_unlock;
case HOT_ADD_DISK:
err = hot_add_disk(mddev, new_decode_dev(arg));
goto done_unlock;
case SET_DISK_FAULTY:
err = set_disk_faulty(mddev, new_decode_dev(arg));
goto done_unlock;
case RUN_ARRAY:
err = do_md_run(mddev);
goto done_unlock;
case SET_BITMAP_FILE:
err = set_bitmap_file(mddev, (int)arg);
goto done_unlock;
default:
err = -EINVAL;
goto abort_unlock;
}
done_unlock:
abort_unlock:
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
if (mddev->hold_active == UNTIL_IOCTL &&
err != -EINVAL)
mddev->hold_active = 0;
mddev_unlock(mddev);
return err;
done:
if (err)
MD_BUG();
abort:
return err;
}
static int md_open(struct block_device *bdev, fmode_t mode)
{
/*
* Succeed if we can lock the mddev, which confirms that
* it isn't being stopped right now.
*/
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
mddev_t *mddev = mddev_find(bdev->bd_dev);
int err;
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
if (mddev->gendisk != bdev->bd_disk) {
/* we are racing with mddev_put which is discarding this
* bd_disk.
*/
mddev_put(mddev);
/* Wait until bdev->bd_disk is definitely gone */
flush_scheduled_work();
/* Then retry the open from the top */
return -ERESTARTSYS;
}
BUG_ON(mddev != bdev->bd_disk->private_data);
if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
goto out;
err = 0;
atomic_inc(&mddev->openers);
mddev_unlock(mddev);
check_disk_change(bdev);
out:
return err;
}
static int md_release(struct gendisk *disk, fmode_t mode)
{
mddev_t *mddev = disk->private_data;
BUG_ON(!mddev);
atomic_dec(&mddev->openers);
mddev_put(mddev);
return 0;
}
static int md_media_changed(struct gendisk *disk)
{
mddev_t *mddev = disk->private_data;
return mddev->changed;
}
static int md_revalidate(struct gendisk *disk)
{
mddev_t *mddev = disk->private_data;
mddev->changed = 0;
return 0;
}
static struct block_device_operations md_fops =
{
.owner = THIS_MODULE,
.open = md_open,
.release = md_release,
.locked_ioctl = md_ioctl,
.getgeo = md_getgeo,
.media_changed = md_media_changed,
.revalidate_disk= md_revalidate,
};
static int md_thread(void * arg)
{
mdk_thread_t *thread = arg;
/*
* md_thread is a 'system-thread', it's priority should be very
* high. We avoid resource deadlocks individually in each
* raid personality. (RAID5 does preallocation) We also use RR and
* the very same RT priority as kswapd, thus we will never get
* into a priority inversion deadlock.
*
* we definitely have to have equal or higher priority than
* bdflush, otherwise bdflush will deadlock if there are too
* many dirty RAID5 blocks.
*/
allow_signal(SIGKILL);
while (!kthread_should_stop()) {
/* We need to wait INTERRUPTIBLE so that
* we don't add to the load-average.
* That means we need to be sure no signals are
* pending
*/
if (signal_pending(current))
flush_signals(current);
wait_event_interruptible_timeout
(thread->wqueue,
test_bit(THREAD_WAKEUP, &thread->flags)
|| kthread_should_stop(),
thread->timeout);
clear_bit(THREAD_WAKEUP, &thread->flags);
thread->run(thread->mddev);
}
return 0;
}
void md_wakeup_thread(mdk_thread_t *thread)
{
if (thread) {
dprintk("md: waking up MD thread %s.\n", thread->tsk->comm);
set_bit(THREAD_WAKEUP, &thread->flags);
wake_up(&thread->wqueue);
}
}
mdk_thread_t *md_register_thread(void (*run) (mddev_t *), mddev_t *mddev,
const char *name)
{
mdk_thread_t *thread;
thread = kzalloc(sizeof(mdk_thread_t), GFP_KERNEL);
if (!thread)
return NULL;
init_waitqueue_head(&thread->wqueue);
thread->run = run;
thread->mddev = mddev;
thread->timeout = MAX_SCHEDULE_TIMEOUT;
thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev));
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
}
return thread;
}
void md_unregister_thread(mdk_thread_t *thread)
{
if (!thread)
return;
dprintk("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
kthread_stop(thread->tsk);
kfree(thread);
}
void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
{
if (!mddev) {
MD_BUG();
return;
}
if (!rdev || test_bit(Faulty, &rdev->flags))
return;
if (mddev->external)
set_bit(Blocked, &rdev->flags);
/*
dprintk("md_error dev:%s, rdev:(%d:%d), (caller: %p,%p,%p,%p).\n",
mdname(mddev),
MAJOR(rdev->bdev->bd_dev), MINOR(rdev->bdev->bd_dev),
__builtin_return_address(0),__builtin_return_address(1),
__builtin_return_address(2),__builtin_return_address(3));
*/
if (!mddev->pers)
return;
if (!mddev->pers->error_handler)
return;
mddev->pers->error_handler(mddev,rdev);
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
set_bit(StateChanged, &rdev->flags);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_new_event_inintr(mddev);
}
/* seq_file implementation /proc/mdstat */
static void status_unused(struct seq_file *seq)
{
int i = 0;
mdk_rdev_t *rdev;
seq_printf(seq, "unused devices: ");
list_for_each_entry(rdev, &pending_raid_disks, same_set) {
char b[BDEVNAME_SIZE];
i++;
seq_printf(seq, "%s ",
bdevname(rdev->bdev,b));
}
if (!i)
seq_printf(seq, "<none>");
seq_printf(seq, "\n");
}
static void status_resync(struct seq_file *seq, mddev_t * mddev)
{
sector_t max_sectors, resync, res;
unsigned long dt, db;
sector_t rt;
int scale;
unsigned int per_milli;
resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
else
max_sectors = mddev->dev_sectors;
/*
* Should not happen.
*/
if (!max_sectors) {
MD_BUG();
return;
}
/* Pick 'scale' such that (resync>>scale)*1000 will fit
* in a sector_t, and (max_sectors>>scale) will fit in a
* u32, as those are the requirements for sector_div.
* Thus 'scale' must be at least 10
*/
scale = 10;
if (sizeof(sector_t) > sizeof(unsigned long)) {
while ( max_sectors/2 > (1ULL<<(scale+32)))
scale++;
}
res = (resync>>scale)*1000;
sector_div(res, (u32)((max_sectors>>scale)+1));
per_milli = res;
{
int i, x = per_milli/50, y = 20-x;
seq_printf(seq, "[");
for (i = 0; i < x; i++)
seq_printf(seq, "=");
seq_printf(seq, ">");
for (i = 0; i < y; i++)
seq_printf(seq, ".");
seq_printf(seq, "] ");
}
seq_printf(seq, " %s =%3u.%u%% (%llu/%llu)",
(test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)?
"reshape" :
(test_bit(MD_RECOVERY_CHECK, &mddev->recovery)?
"check" :
(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ?
"resync" : "recovery"))),
per_milli/10, per_milli % 10,
(unsigned long long) resync/2,
(unsigned long long) max_sectors/2);
/*
* dt: time from mark until now
* db: blocks written from mark until now
* rt: remaining time
*
* rt is a sector_t, so could be 32bit or 64bit.
* So we divide before multiply in case it is 32bit and close
* to the limit.
* We scale the divisor (db) by 32 to avoid loosing precision
* near the end of resync when the number of remaining sectors
* is close to 'db'.
* We then divide rt by 32 after multiplying by db to compensate.
* The '+1' avoids division by zero if db is very small.
*/
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
- mddev->resync_mark_cnt;
rt = max_sectors - resync; /* number of remaining sectors */
sector_div(rt, db/32+1);
rt *= dt;
rt >>= 5;
seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60,
((unsigned long)rt % 60)/6);
seq_printf(seq, " speed=%ldK/sec", db/2/dt);
}
static void *md_seq_start(struct seq_file *seq, loff_t *pos)
{
struct list_head *tmp;
loff_t l = *pos;
mddev_t *mddev;
if (l >= 0x10000)
return NULL;
if (!l--)
/* header */
return (void*)1;
spin_lock(&all_mddevs_lock);
list_for_each(tmp,&all_mddevs)
if (!l--) {
mddev = list_entry(tmp, mddev_t, all_mddevs);
mddev_get(mddev);
spin_unlock(&all_mddevs_lock);
return mddev;
}
spin_unlock(&all_mddevs_lock);
if (!l--)
return (void*)2;/* tail */
return NULL;
}
static void *md_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct list_head *tmp;
mddev_t *next_mddev, *mddev = v;
++*pos;
if (v == (void*)2)
return NULL;
spin_lock(&all_mddevs_lock);
if (v == (void*)1)
tmp = all_mddevs.next;
else
tmp = mddev->all_mddevs.next;
if (tmp != &all_mddevs)
next_mddev = mddev_get(list_entry(tmp,mddev_t,all_mddevs));
else {
next_mddev = (void*)2;
*pos = 0x10000;
}
spin_unlock(&all_mddevs_lock);
if (v != (void*)1)
mddev_put(mddev);
return next_mddev;
}
static void md_seq_stop(struct seq_file *seq, void *v)
{
mddev_t *mddev = v;
if (mddev && v != (void*)1 && v != (void*)2)
mddev_put(mddev);
}
struct mdstat_info {
int event;
};
static int md_seq_show(struct seq_file *seq, void *v)
{
mddev_t *mddev = v;
sector_t sectors;
mdk_rdev_t *rdev;
struct mdstat_info *mi = seq->private;
struct bitmap *bitmap;
if (v == (void*)1) {
struct mdk_personality *pers;
seq_printf(seq, "Personalities : ");
spin_lock(&pers_lock);
list_for_each_entry(pers, &pers_list, list)
seq_printf(seq, "[%s] ", pers->name);
spin_unlock(&pers_lock);
seq_printf(seq, "\n");
mi->event = atomic_read(&md_event_count);
return 0;
}
if (v == (void*)2) {
status_unused(seq);
return 0;
}
if (mddev_lock(mddev) < 0)
return -EINTR;
if (mddev->pers || mddev->raid_disks || !list_empty(&mddev->disks)) {
seq_printf(seq, "%s : %sactive", mdname(mddev),
mddev->pers ? "" : "in");
if (mddev->pers) {
if (mddev->ro==1)
seq_printf(seq, " (read-only)");
if (mddev->ro==2)
seq_printf(seq, " (auto-read-only)");
seq_printf(seq, " %s", mddev->pers->name);
}
sectors = 0;
list_for_each_entry(rdev, &mddev->disks, same_set) {
char b[BDEVNAME_SIZE];
seq_printf(seq, " %s[%d]",
bdevname(rdev->bdev,b), rdev->desc_nr);
if (test_bit(WriteMostly, &rdev->flags))
seq_printf(seq, "(W)");
if (test_bit(Faulty, &rdev->flags)) {
seq_printf(seq, "(F)");
continue;
} else if (rdev->raid_disk < 0)
seq_printf(seq, "(S)"); /* spare */
sectors += rdev->sectors;
}
if (!list_empty(&mddev->disks)) {
if (mddev->pers)
seq_printf(seq, "\n %llu blocks",
(unsigned long long)
mddev->array_sectors / 2);
else
seq_printf(seq, "\n %llu blocks",
(unsigned long long)sectors / 2);
}
if (mddev->persistent) {
if (mddev->major_version != 0 ||
mddev->minor_version != 90) {
seq_printf(seq," super %d.%d",
mddev->major_version,
mddev->minor_version);
}
} else if (mddev->external)
seq_printf(seq, " super external:%s",
mddev->metadata_type);
else
seq_printf(seq, " super non-persistent");
if (mddev->pers) {
mddev->pers->status(seq, mddev);
seq_printf(seq, "\n ");
if (mddev->pers->sync_request) {
if (mddev->curr_resync > 2) {
status_resync(seq, mddev);
seq_printf(seq, "\n ");
} else if (mddev->curr_resync == 1 || mddev->curr_resync == 2)
seq_printf(seq, "\tresync=DELAYED\n ");
else if (mddev->recovery_cp < MaxSector)
seq_printf(seq, "\tresync=PENDING\n ");
}
} else
seq_printf(seq, "\n ");
if ((bitmap = mddev->bitmap)) {
unsigned long chunk_kb;
unsigned long flags;
spin_lock_irqsave(&bitmap->lock, flags);
chunk_kb = bitmap->chunksize >> 10;
seq_printf(seq, "bitmap: %lu/%lu pages [%luKB], "
"%lu%s chunk",
bitmap->pages - bitmap->missing_pages,
bitmap->pages,
(bitmap->pages - bitmap->missing_pages)
<< (PAGE_SHIFT - 10),
chunk_kb ? chunk_kb : bitmap->chunksize,
chunk_kb ? "KB" : "B");
if (bitmap->file) {
seq_printf(seq, ", file: ");
seq_path(seq, &bitmap->file->f_path, " \t\n");
}
seq_printf(seq, "\n");
spin_unlock_irqrestore(&bitmap->lock, flags);
}
seq_printf(seq, "\n");
}
mddev_unlock(mddev);
return 0;
}
static const struct seq_operations md_seq_ops = {
.start = md_seq_start,
.next = md_seq_next,
.stop = md_seq_stop,
.show = md_seq_show,
};
static int md_seq_open(struct inode *inode, struct file *file)
{
int error;
struct mdstat_info *mi = kmalloc(sizeof(*mi), GFP_KERNEL);
if (mi == NULL)
return -ENOMEM;
error = seq_open(file, &md_seq_ops);
if (error)
kfree(mi);
else {
struct seq_file *p = file->private_data;
p->private = mi;
mi->event = atomic_read(&md_event_count);
}
return error;
}
static unsigned int mdstat_poll(struct file *filp, poll_table *wait)
{
struct seq_file *m = filp->private_data;
struct mdstat_info *mi = m->private;
int mask;
poll_wait(filp, &md_event_waiters, wait);
/* always allow read */
mask = POLLIN | POLLRDNORM;
if (mi->event != atomic_read(&md_event_count))
mask |= POLLERR | POLLPRI;
return mask;
}
static const struct file_operations md_seq_fops = {
.owner = THIS_MODULE,
.open = md_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_private,
.poll = mdstat_poll,
};
int register_md_personality(struct mdk_personality *p)
{
spin_lock(&pers_lock);
list_add_tail(&p->list, &pers_list);
printk(KERN_INFO "md: %s personality registered for level %d\n", p->name, p->level);
spin_unlock(&pers_lock);
return 0;
}
int unregister_md_personality(struct mdk_personality *p)
{
printk(KERN_INFO "md: %s personality unregistered\n", p->name);
spin_lock(&pers_lock);
list_del_init(&p->list);
spin_unlock(&pers_lock);
return 0;
}
static int is_mddev_idle(mddev_t *mddev, int init)
{
mdk_rdev_t * rdev;
int idle;
int curr_events;
idle = 1;
rcu_read_lock();
rdev_for_each_rcu(rdev, mddev) {
struct gendisk *disk = rdev->bdev->bd_contains->bd_disk;
curr_events = (int)part_stat_read(&disk->part0, sectors[0]) +
(int)part_stat_read(&disk->part0, sectors[1]) -
atomic_read(&disk->sync_io);
/* sync IO will cause sync_io to increase before the disk_stats
* as sync_io is counted when a request starts, and
* disk_stats is counted when it completes.
* So resync activity will cause curr_events to be smaller than
* when there was no such activity.
* non-sync IO will cause disk_stat to increase without
* increasing sync_io so curr_events will (eventually)
* be larger than it was before. Once it becomes
* substantially larger, the test below will cause
* the array to appear non-idle, and resync will slow
* down.
* If there is a lot of outstanding resync activity when
* we set last_event to curr_events, then all that activity
* completing might cause the array to appear non-idle
* and resync will be slowed down even though there might
* not have been non-resync activity. This will only
* happen once though. 'last_events' will soon reflect
* the state where there is little or no outstanding
* resync requests, and further resync activity will
* always make curr_events less than last_events.
*
*/
if (init || curr_events - rdev->last_events > 64) {
rdev->last_events = curr_events;
idle = 0;
}
}
rcu_read_unlock();
return idle;
}
void md_done_sync(mddev_t *mddev, int blocks, int ok)
{
/* another "blocks" (512byte) blocks have been synced */
atomic_sub(blocks, &mddev->recovery_active);
wake_up(&mddev->recovery_wait);
if (!ok) {
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread(mddev->thread);
// stop recovery, signal do_sync ....
}
}
/* md_write_start(mddev, bi)
* If we need to update some array metadata (e.g. 'active' flag
* in superblock) before writing, schedule a superblock update
* and wait for it to complete.
*/
void md_write_start(mddev_t *mddev, struct bio *bi)
{
int did_change = 0;
if (bio_data_dir(bi) != WRITE)
return;
BUG_ON(mddev->ro == 1);
if (mddev->ro == 2) {
/* need to switch to read/write */
mddev->ro = 0;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread);
did_change = 1;
}
atomic_inc(&mddev->writes_pending);
if (mddev->safemode == 1)
mddev->safemode = 0;
if (mddev->in_sync) {
2005-11-09 13:39:34 +08:00
spin_lock_irq(&mddev->write_lock);
if (mddev->in_sync) {
mddev->in_sync = 0;
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
md_wakeup_thread(mddev->thread);
did_change = 1;
}
2005-11-09 13:39:34 +08:00
spin_unlock_irq(&mddev->write_lock);
}
if (did_change)
sysfs_notify_dirent(mddev->sysfs_state);
wait_event(mddev->sb_wait,
!test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
!test_bit(MD_CHANGE_PENDING, &mddev->flags));
}
void md_write_end(mddev_t *mddev)
{
if (atomic_dec_and_test(&mddev->writes_pending)) {
if (mddev->safemode == 2)
md_wakeup_thread(mddev->thread);
else if (mddev->safemode_delay)
mod_timer(&mddev->safemode_timer, jiffies + mddev->safemode_delay);
}
}
/* md_allow_write(mddev)
* Calling this ensures that the array is marked 'active' so that writes
* may proceed without blocking. It is important to call this before
* attempting a GFP_KERNEL allocation while holding the mddev lock.
* Must be called with mddev_lock held.
*
* In the ->external case MD_CHANGE_CLEAN can not be cleared until mddev->lock
* is dropped, so return -EAGAIN after notifying userspace.
*/
int md_allow_write(mddev_t *mddev)
{
if (!mddev->pers)
return 0;
if (mddev->ro)
return 0;
if (!mddev->pers->sync_request)
return 0;
spin_lock_irq(&mddev->write_lock);
if (mddev->in_sync) {
mddev->in_sync = 0;
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
if (mddev->safemode_delay &&
mddev->safemode == 0)
mddev->safemode = 1;
spin_unlock_irq(&mddev->write_lock);
md_update_sb(mddev, 0);
sysfs_notify_dirent(mddev->sysfs_state);
} else
spin_unlock_irq(&mddev->write_lock);
if (test_bit(MD_CHANGE_CLEAN, &mddev->flags))
return -EAGAIN;
else
return 0;
}
EXPORT_SYMBOL_GPL(md_allow_write);
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
void md_do_sync(mddev_t *mddev)
{
mddev_t *mddev2;
unsigned int currspeed = 0,
window;
sector_t max_sectors,j, io_sectors;
unsigned long mark[SYNC_MARKS];
sector_t mark_cnt[SYNC_MARKS];
int last_mark,m;
struct list_head *tmp;
sector_t last_check;
int skipped = 0;
mdk_rdev_t *rdev;
char *desc;
/* just incase thread restarts... */
if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
return;
if (mddev->ro) /* never try to sync a read-only array */
return;
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
desc = "data-check";
else if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
desc = "requested-resync";
else
desc = "resync";
} else if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
desc = "reshape";
else
desc = "recovery";
/* we overload curr_resync somewhat here.
* 0 == not engaged in resync at all
* 2 == checking that there is no conflict with another sync
* 1 == like 2, but have yielded to allow conflicting resync to
* commense
* other == active in resync - this many blocks
*
* Before starting a resync we must have set curr_resync to
* 2, and then checked that every "conflicting" array has curr_resync
* less than ours. When we find one that is the same or higher
* we wait on resync_wait. To avoid deadlock, we reduce curr_resync
* to 1 if we choose to yield (based arbitrarily on address of mddev structure).
* This will mean we have to start checking from the beginning again.
*
*/
do {
mddev->curr_resync = 2;
try_again:
if (kthread_should_stop()) {
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto skip;
}
for_each_mddev(mddev2, tmp) {
if (mddev2 == mddev)
continue;
if (!mddev->parallel_resync
&& mddev2->curr_resync
&& match_mddev_units(mddev, mddev2)) {
DEFINE_WAIT(wq);
if (mddev < mddev2 && mddev->curr_resync == 2) {
/* arbitrarily yield */
mddev->curr_resync = 1;
wake_up(&resync_wait);
}
if (mddev > mddev2 && mddev->curr_resync == 1)
/* no need to wait here, we can wait the next
* time 'round when curr_resync == 2
*/
continue;
/* We need to wait 'interruptible' so as not to
* contribute to the load average, and not to
* be caught by 'softlockup'
*/
prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying %s of %s"
" until %s has finished (they"
" share one or more physical units)\n",
desc, mdname(mddev), mdname(mddev2));
mddev_put(mddev2);
if (signal_pending(current))
flush_signals(current);
schedule();
finish_wait(&resync_wait, &wq);
goto try_again;
}
finish_wait(&resync_wait, &wq);
}
}
} while (mddev->curr_resync < 2);
j = 0;
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
/* resync follows the size requested by the personality,
* which defaults to physical size, but can be virtual size
*/
max_sectors = mddev->resync_max_sectors;
mddev->resync_mismatches = 0;
/* we don't use the checkpoint if there's a bitmap */
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
j = mddev->resync_min;
else if (!mddev->bitmap)
j = mddev->recovery_cp;
} else if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
max_sectors = mddev->dev_sectors;
else {
/* recovery follows the physical size of devices */
max_sectors = mddev->dev_sectors;
j = MaxSector;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
!test_bit(Faulty, &rdev->flags) &&
!test_bit(In_sync, &rdev->flags) &&
rdev->recovery_offset < j)
j = rdev->recovery_offset;
}
printk(KERN_INFO "md: %s of RAID array %s\n", desc, mdname(mddev));
printk(KERN_INFO "md: minimum _guaranteed_ speed:"
" %d KB/sec/disk.\n", speed_min(mddev));
printk(KERN_INFO "md: using maximum available idle IO bandwidth "
"(but not more than %d KB/sec) for %s.\n",
speed_max(mddev), desc);
is_mddev_idle(mddev, 1); /* this initializes IO event counters */
io_sectors = 0;
for (m = 0; m < SYNC_MARKS; m++) {
mark[m] = jiffies;
mark_cnt[m] = io_sectors;
}
last_mark = 0;
mddev->resync_mark = mark[last_mark];
mddev->resync_mark_cnt = mark_cnt[last_mark];
/*
* Tune reconstruction:
*/
window = 32*(PAGE_SIZE/512);
printk(KERN_INFO "md: using %dk window, over a total of %llu blocks.\n",
window/2,(unsigned long long) max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
last_check = 0;
if (j>2) {
printk(KERN_INFO
"md: resuming %s of %s from checkpoint.\n",
desc, mdname(mddev));
mddev->curr_resync = j;
}
while (j < max_sectors) {
sector_t sectors;
skipped = 0;
if ((mddev->curr_resync > mddev->curr_resync_completed &&
(mddev->curr_resync - mddev->curr_resync_completed)
> (max_sectors >> 4)) ||
md: update sync_completed and reshape_position even more often. There are circumstances when a user-space process might need to "oversee" a resync/reshape process. For example when doing an in-place reshape of a raid5, it is prudent to take a backup of each section before reshaping it as this is the only way to provide safety against an unplanned shutdown (i.e. crash/power failure). The sync_max sysfs value can be used to stop the resync from advancing beyond a particular point. So user-space can: suspend IO to the first section and back it up set 'sync_max' to the end of the section wait for 'sync_completed' to reach that point resume IO on the first section and move on to the next section. However this process requires the kernel and user-space to run in lock-step which could introduce unnecessary delays. It would be better if a 'double buffered' approach could be used with userspace and kernel space working on different sections with the 'next' section always ready when the 'current' section is finished. One problem with implementing this is that sync_completed is only guaranteed to be updated when the sync process reaches sync_max. (it is updated on a time basis at other times, but it is hard to rely on that). This defeats some of the double buffering. With this patch, sync_completed (and reshape_position) get updated as the current position approaches sync_max, so there is room for userspace to advance sync_max early without losing updates. To be precise, sync_completed is updated when the current sync position reaches half way between the current value of sync_completed and the value of sync_max. This will usually be a good time for user space to update sync_max. If sync_max does not get updated, the updates to sync_completed (together with associated metadata updates) will occur at an exponentially increasing frequency which will get unreasonably fast (one update every page) immediately before the process hits sync_max and stops. So the update rate will be unreasonably fast only for an insignificant period of time. Signed-off-by: NeilBrown <neilb@suse.de>
2009-04-17 09:06:30 +08:00
(j - mddev->curr_resync_completed)*2
>= mddev->resync_max - mddev->curr_resync_completed
) {
/* time to update curr_resync_completed */
blk_unplug(mddev->queue);
wait_event(mddev->recovery_wait,
atomic_read(&mddev->recovery_active) == 0);
mddev->curr_resync_completed =
mddev->curr_resync;
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
if (j >= mddev->resync_max)
wait_event(mddev->recovery_wait,
mddev->resync_max > j
|| kthread_should_stop());
if (kthread_should_stop())
goto interrupted;
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto out;
}
if (!skipped) { /* actual IO requested */
io_sectors += sectors;
atomic_add(sectors, &mddev->recovery_active);
}
j += sectors;
if (j>1) mddev->curr_resync = j;
mddev->curr_mark_cnt = io_sectors;
if (last_check == 0)
/* this is the earliers that rebuilt will be
* visible in /proc/mdstat
*/
md_new_event(mddev);
if (last_check + window > io_sectors || j == max_sectors)
continue;
last_check = io_sectors;
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
break;
repeat:
if (time_after_eq(jiffies, mark[last_mark] + SYNC_MARK_STEP )) {
/* step marks */
int next = (last_mark+1) % SYNC_MARKS;
mddev->resync_mark = mark[next];
mddev->resync_mark_cnt = mark_cnt[next];
mark[next] = jiffies;
mark_cnt[next] = io_sectors - atomic_read(&mddev->recovery_active);
last_mark = next;
}
if (kthread_should_stop())
goto interrupted;
/*
* this loop exits only if either when we are slower than
* the 'hard' speed limit, or the system was IO-idle for
* a jiffy.
* the system might be non-idle CPU-wise, but we only care
* about not overloading the IO subsystem. (things like an
* e2fsck being done on the RAID array should execute fast)
*/
blk_unplug(mddev->queue);
cond_resched();
currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2
/((jiffies-mddev->resync_mark)/HZ +1) +1;
if (currspeed > speed_min(mddev)) {
if ((currspeed > speed_max(mddev)) ||
!is_mddev_idle(mddev, 0)) {
msleep(500);
goto repeat;
}
}
}
printk(KERN_INFO "md: %s: %s done.\n",mdname(mddev), desc);
/*
* this also signals 'finished resyncing' to md_stop
*/
out:
blk_unplug(mddev->queue);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
/* tell personality that we are finished */
mddev->pers->sync_request(mddev, max_sectors, &skipped, 1);
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
mddev->curr_resync > 2) {
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
if (mddev->curr_resync >= mddev->recovery_cp) {
printk(KERN_INFO
"md: checkpointing %s of %s.\n",
desc, mdname(mddev));
mddev->recovery_cp = mddev->curr_resync;
}
} else
mddev->recovery_cp = MaxSector;
} else {
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery))
mddev->curr_resync = MaxSector;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
!test_bit(Faulty, &rdev->flags) &&
!test_bit(In_sync, &rdev->flags) &&
rdev->recovery_offset < mddev->curr_resync)
rdev->recovery_offset = mddev->curr_resync;
}
}
set_bit(MD_CHANGE_DEVS, &mddev->flags);
skip:
mddev->curr_resync = 0;
mddev->curr_resync_completed = 0;
mddev->resync_min = 0;
mddev->resync_max = MaxSector;
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
wake_up(&resync_wait);
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
return;
interrupted:
/*
* got a signal, exit.
*/
printk(KERN_INFO
"md: md_do_sync() got signal ... exiting\n");
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto out;
}
EXPORT_SYMBOL_GPL(md_do_sync);
static int remove_and_add_spares(mddev_t *mddev)
{
mdk_rdev_t *rdev;
int spares = 0;
mddev->curr_resync_completed = 0;
list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
!test_bit(Blocked, &rdev->flags) &&
(test_bit(Faulty, &rdev->flags) ||
! test_bit(In_sync, &rdev->flags)) &&
atomic_read(&rdev->nr_pending)==0) {
if (mddev->pers->hot_remove_disk(
mddev, rdev->raid_disk)==0) {
char nm[20];
sprintf(nm,"rd%d", rdev->raid_disk);
sysfs_remove_link(&mddev->kobj, nm);
rdev->raid_disk = -1;
}
}
if (mddev->degraded && ! mddev->ro && !mddev->recovery_disabled) {
list_for_each_entry(rdev, &mddev->disks, same_set) {
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
!test_bit(Blocked, &rdev->flags))
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
spares++;
if (rdev->raid_disk < 0
&& !test_bit(Faulty, &rdev->flags)) {
rdev->recovery_offset = 0;
if (mddev->pers->
hot_add_disk(mddev, rdev) == 0) {
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
printk(KERN_WARNING
"md: cannot register "
"%s for %s\n",
nm, mdname(mddev));
spares++;
md_new_event(mddev);
} else
break;
}
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
}
}
return spares;
}
/*
* This routine is regularly called by all per-raid-array threads to
* deal with generic issues like resync and super-block update.
* Raid personalities that don't have a thread (linear/raid0) do not
* need this as they never do any recovery or update the superblock.
*
* It does not do any resync itself, but rather "forks" off other threads
* to do that as needed.
* When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in
* "->recovery" and create a thread at ->sync_thread.
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:39 +08:00
* When the thread finishes it sets MD_RECOVERY_DONE
* and wakeups up this thread which will reap the thread and finish up.
* This thread also removes any faulty devices (with nr_pending == 0).
*
* The overall approach is:
* 1/ if the superblock needs updating, update it.
* 2/ If a recovery thread is running, don't do anything else.
* 3/ If recovery has finished, clean up, possibly marking spares active.
* 4/ If there are any faulty devices, remove them.
* 5/ If array is degraded, try to add spares devices
* 6/ If array has spares or is not in-sync, start a resync thread.
*/
void md_check_recovery(mddev_t *mddev)
{
mdk_rdev_t *rdev;
if (mddev->bitmap)
bitmap_daemon_work(mddev->bitmap);
if (mddev->ro)
return;
if (signal_pending(current)) {
if (mddev->pers->sync_request && !mddev->external) {
printk(KERN_INFO "md: %s in immediate safe mode\n",
mdname(mddev));
mddev->safemode = 2;
}
flush_signals(current);
}
if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
if ( ! (
(mddev->flags && !mddev->external) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
(mddev->external == 0 && mddev->safemode == 1) ||
(mddev->safemode == 2 && ! atomic_read(&mddev->writes_pending)
&& !mddev->in_sync && mddev->recovery_cp == MaxSector)
))
return;
if (mddev_trylock(mddev)) {
int spares = 0;
if (mddev->ro) {
/* Only thing we do on a ro array is remove
* failed devices.
*/
remove_and_add_spares(mddev);
clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
goto unlock;
}
if (!mddev->external) {
int did_change = 0;
spin_lock_irq(&mddev->write_lock);
if (mddev->safemode &&
!atomic_read(&mddev->writes_pending) &&
!mddev->in_sync &&
mddev->recovery_cp == MaxSector) {
mddev->in_sync = 1;
did_change = 1;
if (mddev->persistent)
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
}
if (mddev->safemode == 1)
mddev->safemode = 0;
spin_unlock_irq(&mddev->write_lock);
if (did_change)
sysfs_notify_dirent(mddev->sysfs_state);
}
if (mddev->flags)
md_update_sb(mddev, 0);
list_for_each_entry(rdev, &mddev->disks, same_set)
if (test_and_clear_bit(StateChanged, &rdev->flags))
sysfs_notify_dirent(rdev->sysfs_state);
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
!test_bit(MD_RECOVERY_DONE, &mddev->recovery)) {
/* resync/recovery still happening */
clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
goto unlock;
}
if (mddev->sync_thread) {
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* success...*/
/* activate any spares */
if (mddev->pers->spare_active(mddev))
sysfs_notify(&mddev->kobj, NULL,
"degraded");
}
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
mddev->pers->finish_reshape)
mddev->pers->finish_reshape(mddev);
md_update_sb(mddev, 1);
/* if array is no-longer degraded, then any saved_raid_disk
* information must be scrapped
*/
if (!mddev->degraded)
list_for_each_entry(rdev, &mddev->disks, same_set)
rdev->saved_raid_disk = -1;
mddev->recovery = 0;
/* flag recovery needed just to double check */
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
sysfs_notify_dirent(mddev->sysfs_action);
md_new_event(mddev);
goto unlock;
}
/* Set RUNNING before clearing NEEDED to avoid
* any transients in the value of "sync_action".
*/
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
/* Clear some bits that don't mean anything, but
* might be left set
*/
clear_bit(MD_RECOVERY_INTR, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery))
goto unlock;
/* no recovery is running.
* remove any failed drives, then
* add spares if possible.
* Spare are also removed and re-added, to allow
* the personality to fail the re-add.
*/
if (mddev->reshape_position != MaxSector) {
if (mddev->pers->check_reshape(mddev) != 0)
/* Cannot proceed */
goto unlock;
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if ((spares = remove_and_add_spares(mddev))) {
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if (mddev->recovery_cp < MaxSector) {
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if (!test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
/* nothing to be done ... */
goto unlock;
if (mddev->pers->sync_request) {
if (spares && mddev->bitmap && ! mddev->bitmap->file) {
/* We are adding a device or devices to an array
* which has the bitmap stored on all devices.
* So make sure all bitmap pages get written
*/
bitmap_write_all(mddev->bitmap);
}
mddev->sync_thread = md_register_thread(md_do_sync,
mddev,
"%s_resync");
if (!mddev->sync_thread) {
printk(KERN_ERR "%s: could not start resync"
" thread...\n",
mdname(mddev));
/* leave the spares where they are, it shouldn't hurt */
mddev->recovery = 0;
} else
md_wakeup_thread(mddev->sync_thread);
sysfs_notify_dirent(mddev->sysfs_action);
md_new_event(mddev);
}
unlock:
if (!mddev->sync_thread) {
clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
if (test_and_clear_bit(MD_RECOVERY_RECOVER,
&mddev->recovery))
if (mddev->sysfs_action)
sysfs_notify_dirent(mddev->sysfs_action);
}
mddev_unlock(mddev);
}
}
void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
{
sysfs_notify_dirent(rdev->sysfs_state);
wait_event_timeout(rdev->blocked_wait,
!test_bit(Blocked, &rdev->flags),
msecs_to_jiffies(5000));
rdev_dec_pending(rdev, mddev);
}
EXPORT_SYMBOL(md_wait_for_blocked_rdev);
static int md_notify_reboot(struct notifier_block *this,
unsigned long code, void *x)
{
struct list_head *tmp;
mddev_t *mddev;
if ((code == SYS_DOWN) || (code == SYS_HALT) || (code == SYS_POWER_OFF)) {
printk(KERN_INFO "md: stopping all md devices.\n");
for_each_mddev(mddev, tmp)
if (mddev_trylock(mddev)) {
/* Force a switch to readonly even array
* appears to still be in use. Hence
* the '100'.
*/
do_md_stop(mddev, 1, 100);
mddev_unlock(mddev);
}
/*
* certain more exotic SCSI devices are known to be
* volatile wrt too early system reboots. While the
* right place to handle this issue is the given
* driver, we do want to have a safe RAID driver ...
*/
mdelay(1000*1);
}
return NOTIFY_DONE;
}
static struct notifier_block md_notifier = {
.notifier_call = md_notify_reboot,
.next = NULL,
.priority = INT_MAX, /* before any real devices */
};
static void md_geninit(void)
{
dprintk("md: sizeof(mdp_super_t) = %d\n", (int)sizeof(mdp_super_t));
proc_create("mdstat", S_IRUGO, NULL, &md_seq_fops);
}
static int __init md_init(void)
{
if (register_blkdev(MD_MAJOR, "md"))
return -1;
if ((mdp_major=register_blkdev(0, "mdp"))<=0) {
unregister_blkdev(MD_MAJOR, "md");
return -1;
}
blk_register_region(MKDEV(MD_MAJOR, 0), 1UL<<MINORBITS, THIS_MODULE,
md_probe, NULL, NULL);
blk_register_region(MKDEV(mdp_major, 0), 1UL<<MINORBITS, THIS_MODULE,
md_probe, NULL, NULL);
register_reboot_notifier(&md_notifier);
[PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 16:34:09 +08:00
raid_table_header = register_sysctl_table(raid_root_table);
md_geninit();
return 0;
}
#ifndef MODULE
/*
* Searches all registered partitions for autorun RAID arrays
* at boot time.
*/
static LIST_HEAD(all_detected_devices);
struct detected_devices_node {
struct list_head list;
dev_t dev;
};
void md_autodetect_dev(dev_t dev)
{
struct detected_devices_node *node_detected_dev;
node_detected_dev = kzalloc(sizeof(*node_detected_dev), GFP_KERNEL);
if (node_detected_dev) {
node_detected_dev->dev = dev;
list_add_tail(&node_detected_dev->list, &all_detected_devices);
} else {
printk(KERN_CRIT "md: md_autodetect_dev: kzalloc failed"
", skipping dev(%d,%d)\n", MAJOR(dev), MINOR(dev));
}
}
static void autostart_arrays(int part)
{
mdk_rdev_t *rdev;
struct detected_devices_node *node_detected_dev;
dev_t dev;
int i_scanned, i_passed;
i_scanned = 0;
i_passed = 0;
printk(KERN_INFO "md: Autodetecting RAID arrays.\n");
while (!list_empty(&all_detected_devices) && i_scanned < INT_MAX) {
i_scanned++;
node_detected_dev = list_entry(all_detected_devices.next,
struct detected_devices_node, list);
list_del(&node_detected_dev->list);
dev = node_detected_dev->dev;
kfree(node_detected_dev);
rdev = md_import_device(dev,0, 90);
if (IS_ERR(rdev))
continue;
if (test_bit(Faulty, &rdev->flags)) {
MD_BUG();
continue;
}
set_bit(AutoDetected, &rdev->flags);
list_add(&rdev->same_set, &pending_raid_disks);
i_passed++;
}
printk(KERN_INFO "md: Scanned %d and added %d devices.\n",
i_scanned, i_passed);
autorun_devices(part);
}
#endif /* !MODULE */
static __exit void md_exit(void)
{
mddev_t *mddev;
struct list_head *tmp;
blk_unregister_region(MKDEV(MD_MAJOR,0), 1U << MINORBITS);
blk_unregister_region(MKDEV(mdp_major,0), 1U << MINORBITS);
unregister_blkdev(MD_MAJOR,"md");
unregister_blkdev(mdp_major, "mdp");
unregister_reboot_notifier(&md_notifier);
unregister_sysctl_table(raid_table_header);
remove_proc_entry("mdstat", NULL);
for_each_mddev(mddev, tmp) {
export_array(mddev);
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 05:31:10 +08:00
mddev->hold_active = 0;
}
}
subsys_initcall(md_init);
module_exit(md_exit)
static int get_ro(char *buffer, struct kernel_param *kp)
{
return sprintf(buffer, "%d", start_readonly);
}
static int set_ro(const char *val, struct kernel_param *kp)
{
char *e;
int num = simple_strtoul(val, &e, 10);
if (*val && (*e == '\0' || *e == '\n')) {
start_readonly = num;
return 0;
}
return -EINVAL;
}
module_param_call(start_ro, set_ro, get_ro, NULL, S_IRUSR|S_IWUSR);
module_param(start_dirty_degraded, int, S_IRUGO|S_IWUSR);
module_param_call(new_array, add_named_array, NULL, NULL, S_IWUSR);
EXPORT_SYMBOL(register_md_personality);
EXPORT_SYMBOL(unregister_md_personality);
EXPORT_SYMBOL(md_error);
EXPORT_SYMBOL(md_done_sync);
EXPORT_SYMBOL(md_write_start);
EXPORT_SYMBOL(md_write_end);
EXPORT_SYMBOL(md_register_thread);
EXPORT_SYMBOL(md_unregister_thread);
EXPORT_SYMBOL(md_wakeup_thread);
EXPORT_SYMBOL(md_check_recovery);
MODULE_LICENSE("GPL");
MODULE_ALIAS("md");
MODULE_ALIAS_BLOCKDEV_MAJOR(MD_MAJOR);