renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
Code
bb9496c6f7
linux-next/drivers/usb/gadget/Makefile

44 lines
1.2 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# USB peripheral controller drivers
#
USB: usb gadget stack can now -DDEBUG with Kconfig Although the other USB driver directories got taught how use Kconfig and the Makefile to enable the debugging messages enabled by -DDEBUG, the gadget stack was overlooked. This patch remedies that omission, but doesn't update any drivers to remove previous idiosyncracies in this area ... other than the RNDIS code, which defined its own DEBUG() macro in a broken way. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-02 08:35:28 +08:00
ifeq ($(CONFIG_USB_GADGET_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o
USB: amd5536 UDC driver (in GEODE southbridge) Driver for the AMD5536 UDC, as found in the AMD Geode CS5536 (southbridge). This is a high speed DMA-capable controller, which can also be used in OTG configurations (which are not supported by this patch). Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-17 12:40:54 +08:00
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-23 06:36:39 +08:00
obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
usb: pxa27x_udc driver Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 06:56:49 +08:00
obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
USB Gadget driver for Samsung s3c2410 ARM SoC This patch adds the support for the Usb Device Controller on Samsung S3C24xx SoCs. This driver passes all tests from testusb (including #13) and has been tested on S3C2410, S3C24212, and S3C2440 SoCs. Whitespace updates, minor cleanups by David Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Herbert Pötzl <herbert@13thfloor.at> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-07 12:05:49 +08:00
obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
[PATCH] USB: add support for AT91 gadget This adds support for the USB peripheral controller on AT91 (rm9200, eventually also sam9261 or uClinux) platforms. More SOC support for Linux-USB ... an uncomplicated pure PIO driver. It'd be worth using this as a model, if you're starting a driver for some other peripheral controller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-23 02:32:37 +08:00
obj-$(CONFIG_USB_AT91) += at91_udc.o
USB: add atmel_usba_udc driver This is a driver for the Atmel USBA UDC which can be found integrated on AT32AP700x AVR32 processors. For hardware documentation, please see the AT32AP7000 data sheet: http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf This is a dual speed controller (connects at high or full speed). The driver supports up to 7 control, bulk, interrupt and isochronous endpoints with some constraints. Bulk, interrupt and isochronous transfers are driven by DMA. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-10 17:29:43 +08:00
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
USB: add Freescale high-speed USB SOC device controller driver Freescale high-speed USB SOC can be found on some Freescale processors among different architectures. It supports both host and device functions. This driver adds its device support for Linux USB Gadget layer. It is tested on MPC8349 and MPC8313, but should work on other platforms with minor tweaks. The driver passed USBCV 1.3 compliance tests. Note that this driver doesn't yet include OTG support. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <tanya.jiang@freescale.com> Signed-off-by: Bruce Schmid <duck@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-24 01:54:25 +08:00
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
USB: m66592-udc: peripheral controller driver for M66592 I would like to submit Renesas M66592 udc driver. The M66592 is Renesas USB 2.0 peripheral controller. This controller supports USB high-speed. The driver has been tested Gadget Zero, Ethernet Gadget, File-backed Storage Gadget, and passed usbtest script. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-10 12:18:23 +08:00
obj-$(CONFIG_USB_M66592) += m66592-udc.o
usb: add Freescale QE/CPM USB peripheral controller driver Some of Freescale SoC chips have a QE or CPM co-processor which supports full speed USB. The driver adds device mode support of both QE and CPM USB controller to Linux USB gadget. The driver is tested with MPC8360 and MPC8272, and should work with other models having QE/CPM given minor tweaks. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-02 19:58:10 +08:00
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# USB gadget drivers
#
usb gadget: link fixes for gadget zero Change how the Gadget Zero driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:41:31 +08:00
g_zero-objs := zero.o
usb gadget: link fixes for network gadget Change how the Ethernet/RNDIS gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". This is a bit more complicated than most of the others because it had to resolve a few symbol collisions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:45:07 +08:00
g_ether-objs := ether.o
usb gadget: link fixes for serial gadget Change how the serial gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:41:02 +08:00
g_serial-objs := serial.o
usb gadget: link fixes for MIDI gadget Change how the MIDI gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:42:04 +08:00
g_midi-objs := gmidi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gadgetfs-objs := inode.o
usb gadget: link fixes for storage gadget Change how the file storage gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:43:25 +08:00
g_file_storage-objs := file_storage.o
usb gadget: link fixes for printer gadget Change how the printer gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:42:49 +08:00
g_printer-objs := printer.o
usb gadget: link fixes for cdc composite gadget Change how the CDC Composite gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-19 08:43:56 +08:00
g_cdc-objs := cdc2.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_ZERO) += g_zero.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
USB: add Printer Gadget Driver G_PRINTER: Adds a USB printer gadget driver for use in printer firmware. This adds a USB printer gadget driver for use in printer firmware. The printer gadget channels data between the USB host and a userspace program driving the print engine. The user space program reads and writes the device file /dev/g_printer to receive or send printer data. It can use ioctl calls to the device file to get or set printer status. Signed-off-by: Craig W. Nadler <craig@nadler.us> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-12 07:00:15 +08:00
obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
USB: gmidi: New USB MIDI Gadget class driver. This driver is glue between the USB gadget interface and the ALSA MIDI interface. It allows us to appear as a MIDI Streaming device to a host system on the other end of a USB cable. This includes linux/usb/audio.h and linux/usb/midi.h containing definitions from the relevant USB specifications for USB audio and USB MIDI devices. The following changes have been made since the first RFC posting: * Bug fixes to endpoint handling. * Workaround for USB_REQ_SET_CONFIGURATION handling, not understood yet. * Added SND and SND_RAWMIDI dependencies in Kconfig. * Moved usb_audio.h and usb_midi.h to usb/*.h * Added module parameters for ALSA card index and id. * Added module parameters for USB descriptor IDs and strings. * Removed some unneeded stuff inherited from zero.c, more to go. * Provide DECLARE_* macros for the variable-length structs. * Use kmalloc instead of usb_ep_alloc_buffer. * Limit source to 80 columns. * Return actual error code instead of -ENOMEM in a few places. Signed-off-by: Ben Williamson <ben.williamson@greyinnovation.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-01 09:28:16 +08:00
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
usb gadget: new "CDC Composite" gadget driver This is a simple example of a composite gadget, combining two Communications Class Device (CDC) functions: ECM and ACM. This provides a clear example of how the composite gadget framework is intended to work. It's surprising that MS-Windows (or at least, XP and previous) won't "just work" with something this simple... One /proc/bus/usb/devices listing looks like: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 46 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0525 ProdID=a4aa Rev= 3.01 S: Manufacturer=Linux 2.6.26-rc6-pnut with net2280 S: Product=CDC Composite Gadget C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Not all USB peripheral controller hardware can support this driver. All the highspeed-capable peripheral controllers with drivers now in the mainline kernel seem to support this, as does omap_udc. But many full speed controllers don't have enough endpoints, or (as with the PXA controllers) don't support altsettings. Lightly tested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-20 09:20:26 +08:00
obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Copy Permalink