renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
ba46ee4c0e
linux-next/include/net/ip6_route.h

214 lines
5.9 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef _NET_IP6_ROUTE_H
#define _NET_IP6_ROUTE_H
[IPV6]: ROUTE: Add experimental support for Route Information Option in RA (RFC4191). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 09:06:24 +08:00
struct route_info {
__u8 type;
__u8 length;
__u8 prefix_len;
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved_h:3,
route_pref:2,
reserved_l:3;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 reserved_l:3,
route_pref:2,
reserved_h:3;
#endif
[IPV6]: Misc endianness annotations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 12:56:00 +08:00
__be32 lifetime;
[IPV6]: ROUTE: Add experimental support for Route Information Option in RA (RFC4191). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 09:06:24 +08:00
__u8 prefix[0]; /* 0,8 or 16 */
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <net/flow.h>
#include <net/ip6_fib.h>
#include <net/sock.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
ipv6: Introduce rt6_nexthop() to select nexthop address. For RTF_GATEWAY route, return rt->rt6i_gateway. Otherwise, return 2nd argument (destination address). This will be used by following patches which remove rt->n dependency patches in ip6_dst_lookup_tail() and ip6_finish_output2(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17 20:53:48 +08:00
#include <linux/route.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 08:37:42 +08:00
#define RT6_LOOKUP_F_IFACE 0x00000001
#define RT6_LOOKUP_F_REACHABLE 0x00000002
#define RT6_LOOKUP_F_HAS_SADDR 0x00000004
#define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008
#define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010
#define RT6_LOOKUP_F_SRCPREF_COA 0x00000020
[IPV6] ROUTE: Unify RT6_F_xxx and RT6_SELECT_F_xxx flags Unify RT6_F_xxx and RT6_SELECT_F_xxx flags into RT6_LOOKUP_F_xxx flags, and put them into ip6_route.h Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Ville Nuorvala <vnuorval@tcs.hut.fi Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-24 08:25:05 +08:00
ipv6: Limit mtu to 65575 bytes Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11 12:23:36 +08:00
/* We do not (yet ?) support IPv6 jumbograms (RFC 2675)
* Unlike IPv4, hdr->seg_len doesn't include the IPv6 header
*/
#define IP6_MAX_MTU (0xFFFF + sizeof(struct ipv6hdr))
ipv6: Optmize translation between IPV6_PREFER_SRC_xxx and RT6_LOOKUP_F_xxx. IPV6_PREFER_SRC_xxx definitions: | #define IPV6_PREFER_SRC_TMP 0x0001 | #define IPV6_PREFER_SRC_PUBLIC 0x0002 | #define IPV6_PREFER_SRC_COA 0x0004 RT6_LOOKUP_F_xxx definitions: | #define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008 | #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 | #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 So, we can translate between these two groups by shift operation instead of multiple 'if's. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07 08:14:44 +08:00
/*
* rt6_srcprefs2flags() and rt6_flags2srcprefs() translate
* between IPV6_ADDR_PREFERENCES socket option values
* IPV6_PREFER_SRC_TMP = 0x1
* IPV6_PREFER_SRC_PUBLIC = 0x2
* IPV6_PREFER_SRC_COA = 0x4
* and above RT6_LOOKUP_F_SRCPREF_xxx flags.
*/
static inline int rt6_srcprefs2flags(unsigned int srcprefs)
{
/* No need to bitmask because srcprefs have only 3 bits. */
return srcprefs << 3;
}
static inline unsigned int rt6_flags2srcprefs(int flags)
{
return (flags >> 3) & 7;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipv6: reuse rt6_need_strict Move the whole rt6_need_strict as static inline into ip6_route.h, so that it can be reused Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29 09:27:30 +08:00
static inline bool rt6_need_strict(const struct in6_addr *daddr)
{
return ipv6_addr_type(daddr) &
(IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK);
}
inet: Create and use rt{,6}_get_peer_create(). There's a lot of places that open-code rt{,6}_get_peer() only because they want to set 'create' to one. So add an rt{,6}_get_peer_create() for their sake. There were also a few spots open-coding plain rt{,6}_get_peer() and those are transformed here as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09 14:24:18 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
void ip6_route_input(struct sk_buff *skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail() The current implementation of ip6_dst_lookup_tail basically ignore the egress ifindex match: if the saddr is set, ip6_route_output() purposefully ignores flowi6_oif, due to the commit d46a9d678e4c ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"), if the saddr is 'any' the first route lookup in ip6_dst_lookup_tail fails, but upon failure a second lookup will be performed with saddr set, thus ignoring the ifindex constraint. This commit adds an output route lookup function variant, which allows the caller to specify lookup flags, and modify ip6_dst_lookup_tail() to enforce the ifindex match on the second lookup via said helper. ip6_route_output() becames now a static inline function build on top of ip6_route_output_flags(); as a side effect, out-of-tree modules need now a GPL license to access the output route lookup functionality. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29 19:30:19 +08:00
struct dst_entry *ip6_route_output_flags(struct net *net, const struct sock *sk,
struct flowi6 *fl6, int flags);
static inline struct dst_entry *ip6_route_output(struct net *net,
const struct sock *sk,
struct flowi6 *fl6)
{
return ip6_route_output_flags(net, sk, fl6, 0);
}
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
struct dst_entry *ip6_route_lookup(struct net *net, struct flowi6 *fl6,
int flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
int ip6_route_init(void);
void ip6_route_cleanup(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
int ipv6_route_ioctl(struct net *net, unsigned int cmd, void __user *arg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
int ip6_route_add(struct fib6_config *cfg);
int ip6_ins_rt(struct rt6_info *);
int ip6_del_rt(struct rt6_info *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
int ip6_route_get_saddr(struct net *net, struct rt6_info *rt,
const struct in6_addr *daddr, unsigned int prefs,
struct in6_addr *saddr);
ipv6: RTA_PREFSRC support for ipv6 route source address selection [ipv6] Add support for RTA_PREFSRC This patch allows a user to select the preferred source address for a specific IPv6-Route. It can be set via a netlink message setting RTA_PREFSRC to a valid IPv6 address which must be up on the device the route will be bound to. Signed-off-by: Daniel Walter <dwalter@barracuda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14 05:10:57 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
struct rt6_info *rt6_lookup(struct net *net, const struct in6_addr *daddr,
const struct in6_addr *saddr, int oif, int flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
struct dst_entry *icmp6_dst_alloc(struct net_device *dev, struct flowi6 *fl6);
int icmp6_dst_gc(void);
[IPV6]: Make ndisc_dst_alloc() common for later use. For later use, this patch is renaming ndisc_dst_alloc() (and related function/structures) to icmp6_dst_alloc() (and so on). This patch also removing unused function- pointer argument for it. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-12-07 08:11:48 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
void fib6_force_start_gc(struct net *net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
const struct in6_addr *addr, bool anycast);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: vrf: Fix dst reference counting Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08 02:10:06 +08:00
struct rt6_info *ip6_dst_alloc(struct net *net, struct net_device *dev,
int flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* support functions for ND
*
*/
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
struct rt6_info *rt6_get_dflt_router(const struct in6_addr *addr,
struct net_device *dev);
struct rt6_info *rt6_add_dflt_router(const struct in6_addr *gwaddr,
struct net_device *dev, unsigned int pref);
void rt6_purge_dflt_routers(struct net *net);
int rt6_route_rcv(struct net_device *dev, u8 *opt, int len,
const struct in6_addr *gwaddr);
void ip6_update_pmtu(struct sk_buff *skb, struct net *net, __be32 mtu, int oif,
u32 mark);
void ip6_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, __be32 mtu);
void ip6_redirect(struct sk_buff *skb, struct net *net, int oif, u32 mark);
void ip6_redirect_no_header(struct sk_buff *skb, struct net *net, int oif,
u32 mark);
void ip6_sk_redirect(struct sk_buff *skb, struct sock *sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct netlink_callback;
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:26:03 +08:00
struct rt6_rtnl_dump_arg {
[IPV6]: Increase number of possible routing tables to 2^32 Increase number of possible routing tables to 2^32 by replacing iterations over all possible table IDs by hash table walking. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-11 14:11:17 +08:00
struct sk_buff *skb;
struct netlink_callback *cb;
netns: Add network namespace argument to rt6_fill_node() and ipv6_dev_get_saddr() ipv6_dev_get_saddr() blindly de-references dst_dev to get the network namespace, but some callers might pass NULL. Change callers to pass a namespace pointer instead. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 06:33:21 +08:00
struct net *net;
[IPV6]: Increase number of possible routing tables to 2^32 Increase number of possible routing tables to 2^32 by replacing iterations over all possible table IDs by hash table walking. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-11 14:11:17 +08:00
};
ip*.h: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22 01:22:42 +08:00
int rt6_dump_route(struct rt6_info *rt, void *p_arg);
void rt6_ifdown(struct net *net, struct net_device *dev);
void rt6_mtu_change(struct net_device *dev, unsigned int mtu);
void rt6_remove_prefsrc(struct inet6_ifaddr *ifp);
ipv6: update Destination Cache entries when gateway turn into host RFC 4861 states in 7.2.5: The IsRouter flag in the cache entry MUST be set based on the Router flag in the received advertisement. In those cases where the IsRouter flag changes from TRUE to FALSE as a result of this update, the node MUST remove that router from the Default Router List and update the Destination Cache entries for all destinations using that neighbor as a router as specified in Section 7.3.3. This is needed to detect when a node that is used as a router stops forwarding packets due to being configured as a host. Currently, when dealing with NA Message which IsRouter flag changes from TRUE to FALSE, the kernel only removes router from the Default Router List, and don't update the Destination Cache entries. Now in order to update those Destination Cache entries, i introduce function rt6_clean_tohost(). Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15 15:56:14 +08:00
void rt6_clean_tohost(struct net *net, struct in6_addr *gateway);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Store a destination cache entry in a socket
*/
ipv6: kill sk_dst_lock While testing the np->opt RCU conversion, I found that UDP/IPv6 was using a mixture of xchg() and sk_dst_lock to protect concurrent changes to sk->sk_dst_cache, leading to possible corruptions and crashes. ip6_sk_dst_lookup_flow() uses sk_dst_check() anyway, so the simplest way to fix the mess is to remove sk_dst_lock completely, as we did for IPv4. __ip6_dst_store() and ip6_dst_store() share same implementation. sk_setup_caps() being called with socket lock being held or not, we have to use sk_dst_set() instead of __sk_dst_set() Note that I had to move the "np->dst_cookie = rt6_get_cookie(rt);" in ip6_dst_store() before the sk_setup_caps(sk, dst) call. This is because ip6_dst_store() can be called from process context, without any lock held. As soon as the dst is installed in sk->sk_dst_cache, dst can be freed from another cpu doing a concurrent ip6_dst_store() Doing the dst dereference before doing the install is needed to make sure no use after free would trigger. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 13:53:57 +08:00
static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst,
const struct in6_addr *daddr,
const struct in6_addr *saddr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct ipv6_pinfo *np = inet6_sk(sk);
ipv6: kill sk_dst_lock While testing the np->opt RCU conversion, I found that UDP/IPv6 was using a mixture of xchg() and sk_dst_lock to protect concurrent changes to sk->sk_dst_cache, leading to possible corruptions and crashes. ip6_sk_dst_lookup_flow() uses sk_dst_check() anyway, so the simplest way to fix the mess is to remove sk_dst_lock completely, as we did for IPv4. __ip6_dst_store() and ip6_dst_store() share same implementation. sk_setup_caps() being called with socket lock being held or not, we have to use sk_dst_set() instead of __sk_dst_set() Note that I had to move the "np->dst_cookie = rt6_get_cookie(rt);" in ip6_dst_store() before the sk_setup_caps(sk, dst) call. This is because ip6_dst_store() can be called from process context, without any lock held. As soon as the dst is installed in sk->sk_dst_cache, dst can be freed from another cpu doing a concurrent ip6_dst_store() Doing the dst dereference before doing the install is needed to make sure no use after free would trigger. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 13:53:57 +08:00
np->dst_cookie = rt6_get_cookie((struct rt6_info *)dst);
[IPV6]: Added GSO support for TCPv6 This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju <Ananda.Raju@neterion.com>. His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-01 04:37:03 +08:00
sk_setup_caps(sk, dst);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
np->daddr_cache = daddr;
[IPV6]: Cache source address as well in ipv6_pinfo{}. Based on MIPL2 kernel patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-30 08:15:09 +08:00
#ifdef CONFIG_IPV6_SUBTREES
np->saddr_cache = saddr;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ipv6: bool/const conversions phase2 Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 02:57:34 +08:00
static inline bool ipv6_unicast_destination(const struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
net: skb->dst accessors Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02 13:19:30 +08:00
struct rt6_info *rt = (struct rt6_info *) skb_dst(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return rt->rt6i_flags & RTF_LOCAL;
}
ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:55:58 +08:00
static inline bool ipv6_anycast_destination(const struct dst_entry *dst,
const struct in6_addr *daddr)
IPv6: add the option to use anycast addresses as source addresses in echo reply This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 21:57:27 +08:00
{
ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:55:58 +08:00
struct rt6_info *rt = (struct rt6_info *)dst;
IPv6: add the option to use anycast addresses as source addresses in echo reply This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 21:57:27 +08:00
ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:55:58 +08:00
return rt->rt6i_flags & RTF_ANYCAST ||
(rt->rt6i_dst.plen != 128 &&
ipv6_addr_equal(&rt->rt6i_dst.addr, daddr));
IPv6: add the option to use anycast addresses as source addresses in echo reply This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 21:57:27 +08:00
}
ipv6: Pass struct net through ip6_fragment Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2015-06-13 11:12:04 +08:00
int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
int (*output)(struct net *, struct sock *, struct sk_buff *));
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 19:42:42 +08:00
static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
{
ipv6: protect skb->sk accesses from recursive dereference inside the stack We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01 23:07:44 +08:00
struct ipv6_pinfo *np = skb->sk && !dev_recursion_level() ?
inet6_sk(skb->sk) : NULL;
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 19:42:42 +08:00
ipv6: support IPV6_PMTU_INTERFACE on sockets IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-15 10:41:14 +08:00
return (np && np->pmtudisc >= IPV6_PMTUDISC_PROBE) ?
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 19:42:42 +08:00
skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
}
ipv6: support IPV6_PMTU_INTERFACE on sockets IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-15 10:41:14 +08:00
static inline bool ip6_sk_accept_pmtu(const struct sock *sk)
{
ipv6: yet another new IPV6_MTU_DISCOVER option IPV6_PMTUDISC_OMIT This option has the same semantic as IP_PMTUDISC_OMIT for IPv4 which got recently introduced. It doesn't honor the path mtu discovered by the host but in contrary to IPV6_PMTUDISC_INTERFACE allows the generation of fragments if the packet size exceeds the MTU of the outgoing interface MTU. Fixes: 93b36cf3425b9b ("ipv6: support IPV6_PMTU_INTERFACE on sockets") Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 08:20:43 +08:00
return inet6_sk(sk)->pmtudisc != IPV6_PMTUDISC_INTERFACE &&
inet6_sk(sk)->pmtudisc != IPV6_PMTUDISC_OMIT;
}
net: rename local_df to ignore_df As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05 07:39:18 +08:00
static inline bool ip6_sk_ignore_df(const struct sock *sk)
ipv6: yet another new IPV6_MTU_DISCOVER option IPV6_PMTUDISC_OMIT This option has the same semantic as IP_PMTUDISC_OMIT for IPv4 which got recently introduced. It doesn't honor the path mtu discovered by the host but in contrary to IPV6_PMTUDISC_INTERFACE allows the generation of fragments if the packet size exceeds the MTU of the outgoing interface MTU. Fixes: 93b36cf3425b9b ("ipv6: support IPV6_PMTU_INTERFACE on sockets") Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 08:20:43 +08:00
{
return inet6_sk(sk)->pmtudisc < IPV6_PMTUDISC_DO ||
inet6_sk(sk)->pmtudisc == IPV6_PMTUDISC_OMIT;
ipv6: support IPV6_PMTU_INTERFACE on sockets IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-15 10:41:14 +08:00
}
ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:55:58 +08:00
static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt,
struct in6_addr *daddr)
ipv6: Introduce rt6_nexthop() to select nexthop address. For RTF_GATEWAY route, return rt->rt6i_gateway. Otherwise, return 2nd argument (destination address). This will be used by following patches which remove rt->n dependency patches in ip6_dst_lookup_tail() and ip6_finish_output2(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17 20:53:48 +08:00
{
ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:55:58 +08:00
if (rt->rt6i_flags & RTF_GATEWAY)
return &rt->rt6i_gateway;
ipv6: Only create RTF_CACHE routes after encountering pmtu exception This patch creates a RTF_CACHE routes only after encountering a pmtu exception. After ip6_rt_update_pmtu() has inserted the RTF_CACHE route to the fib6 tree, the rt->rt6i_node->fn_sernum is bumped which will fail the ip6_dst_check() and trigger a relookup. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:56:00 +08:00
else if (unlikely(rt->rt6i_flags & RTF_CACHE))
ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 11:55:58 +08:00
return &rt->rt6i_dst.addr;
else
return daddr;
ipv6: Introduce rt6_nexthop() to select nexthop address. For RTF_GATEWAY route, return rt->rt6i_gateway. Otherwise, return 2nd argument (destination address). This will be used by following patches which remove rt->n dependency patches in ip6_dst_lookup_tail() and ip6_finish_output2(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-17 20:53:48 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
Copy Permalink