2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/arch/x86_64/mm/init.c

801 lines
20 KiB
C
Raw Normal View History

/*
* linux/arch/x86_64/mm/init.c
*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2002,2003 Andi Kleen <ak@suse.de>
*/
#include <linux/config.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/dma.h>
#include <asm/fixmap.h>
#include <asm/e820.h>
#include <asm/apic.h>
#include <asm/tlb.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <asm/smp.h>
#include <asm/sections.h>
#ifndef Dprintk
#define Dprintk(x...)
#endif
struct dma_mapping_ops* dma_ops;
EXPORT_SYMBOL(dma_ops);
static unsigned long dma_reserve __initdata;
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
/*
* NOTE: pagetable_init alloc all the fixmap pagetables contiguous on the
* physical space so we can cache the place of the first one and move
* around without checking the pgd every time.
*/
void show_mem(void)
{
long i, total = 0, reserved = 0;
long shared = 0, cached = 0;
pg_data_t *pgdat;
struct page *page;
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
page = pfn_to_page(pgdat->node_start_pfn + i);
total++;
if (PageReserved(page))
reserved++;
else if (PageSwapCache(page))
cached++;
else if (page_count(page))
shared += page_count(page) - 1;
}
}
printk(KERN_INFO "%lu pages of RAM\n", total);
printk(KERN_INFO "%lu reserved pages\n",reserved);
printk(KERN_INFO "%lu pages shared\n",shared);
printk(KERN_INFO "%lu pages swap cached\n",cached);
}
/* References to section boundaries */
int after_bootmem;
static __init void *spp_getpage(void)
{
void *ptr;
if (after_bootmem)
ptr = (void *) get_zeroed_page(GFP_ATOMIC);
else
ptr = alloc_bootmem_pages(PAGE_SIZE);
if (!ptr || ((unsigned long)ptr & ~PAGE_MASK))
panic("set_pte_phys: cannot allocate page data %s\n", after_bootmem?"after bootmem":"");
Dprintk("spp_getpage %p\n", ptr);
return ptr;
}
static __init void set_pte_phys(unsigned long vaddr,
unsigned long phys, pgprot_t prot)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte, new_pte;
Dprintk("set_pte_phys %lx to %lx\n", vaddr, phys);
pgd = pgd_offset_k(vaddr);
if (pgd_none(*pgd)) {
printk("PGD FIXMAP MISSING, it should be setup in head.S!\n");
return;
}
pud = pud_offset(pgd, vaddr);
if (pud_none(*pud)) {
pmd = (pmd_t *) spp_getpage();
set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER));
if (pmd != pmd_offset(pud, 0)) {
printk("PAGETABLE BUG #01! %p <-> %p\n", pmd, pmd_offset(pud,0));
return;
}
}
pmd = pmd_offset(pud, vaddr);
if (pmd_none(*pmd)) {
pte = (pte_t *) spp_getpage();
set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER));
if (pte != pte_offset_kernel(pmd, 0)) {
printk("PAGETABLE BUG #02!\n");
return;
}
}
new_pte = pfn_pte(phys >> PAGE_SHIFT, prot);
pte = pte_offset_kernel(pmd, vaddr);
if (!pte_none(*pte) &&
pte_val(*pte) != (pte_val(new_pte) & __supported_pte_mask))
pte_ERROR(*pte);
set_pte(pte, new_pte);
/*
* It's enough to flush this one mapping.
* (PGE mappings get flushed as well)
*/
__flush_tlb_one(vaddr);
}
/* NOTE: this is meant to be run only at boot */
void __init
__set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
{
unsigned long address = __fix_to_virt(idx);
if (idx >= __end_of_fixed_addresses) {
printk("Invalid __set_fixmap\n");
return;
}
set_pte_phys(address, phys, prot);
}
unsigned long __initdata table_start, table_end;
extern pmd_t temp_boot_pmds[];
static struct temp_map {
pmd_t *pmd;
void *address;
int allocated;
} temp_mappings[] __initdata = {
{ &temp_boot_pmds[0], (void *)(40UL * 1024 * 1024) },
{ &temp_boot_pmds[1], (void *)(42UL * 1024 * 1024) },
{}
};
static __meminit void *alloc_low_page(int *index, unsigned long *phys)
{
struct temp_map *ti;
int i;
unsigned long pfn = table_end++, paddr;
void *adr;
if (after_bootmem) {
adr = (void *)get_zeroed_page(GFP_ATOMIC);
*phys = __pa(adr);
return adr;
}
if (pfn >= end_pfn)
panic("alloc_low_page: ran out of memory");
for (i = 0; temp_mappings[i].allocated; i++) {
if (!temp_mappings[i].pmd)
panic("alloc_low_page: ran out of temp mappings");
}
ti = &temp_mappings[i];
paddr = (pfn << PAGE_SHIFT) & PMD_MASK;
set_pmd(ti->pmd, __pmd(paddr | _KERNPG_TABLE | _PAGE_PSE));
ti->allocated = 1;
__flush_tlb();
adr = ti->address + ((pfn << PAGE_SHIFT) & ~PMD_MASK);
memset(adr, 0, PAGE_SIZE);
*index = i;
*phys = pfn * PAGE_SIZE;
return adr;
}
static __meminit void unmap_low_page(int i)
{
struct temp_map *ti;
if (after_bootmem)
return;
ti = &temp_mappings[i];
set_pmd(ti->pmd, __pmd(0));
ti->allocated = 0;
}
/* Must run before zap_low_mappings */
__init void *early_ioremap(unsigned long addr, unsigned long size)
{
unsigned long map = round_down(addr, LARGE_PAGE_SIZE);
/* actually usually some more */
if (size >= LARGE_PAGE_SIZE) {
printk("SMBIOS area too long %lu\n", size);
return NULL;
}
set_pmd(temp_mappings[0].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
map += LARGE_PAGE_SIZE;
set_pmd(temp_mappings[1].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
__flush_tlb();
return temp_mappings[0].address + (addr & (LARGE_PAGE_SIZE-1));
}
/* To avoid virtual aliases later */
__init void early_iounmap(void *addr, unsigned long size)
{
if ((void *)round_down((unsigned long)addr, LARGE_PAGE_SIZE) != temp_mappings[0].address)
printk("early_iounmap: bad address %p\n", addr);
set_pmd(temp_mappings[0].pmd, __pmd(0));
set_pmd(temp_mappings[1].pmd, __pmd(0));
__flush_tlb();
}
static void __meminit
phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end)
{
int i;
for (i = 0; i < PTRS_PER_PMD; pmd++, i++, address += PMD_SIZE) {
unsigned long entry;
if (address > end) {
for (; i < PTRS_PER_PMD; i++, pmd++)
set_pmd(pmd, __pmd(0));
break;
}
entry = _PAGE_NX|_PAGE_PSE|_KERNPG_TABLE|_PAGE_GLOBAL|address;
entry &= __supported_pte_mask;
set_pmd(pmd, __pmd(entry));
}
}
static void __meminit
phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
{
pmd_t *pmd = pmd_offset(pud, (unsigned long)__va(address));
if (pmd_none(*pmd)) {
spin_lock(&init_mm.page_table_lock);
phys_pmd_init(pmd, address, end);
spin_unlock(&init_mm.page_table_lock);
__flush_tlb_all();
}
}
static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
{
long i = pud_index(address);
pud = pud + i;
if (after_bootmem && pud_val(*pud)) {
phys_pmd_update(pud, address, end);
return;
}
for (; i < PTRS_PER_PUD; pud++, i++) {
int map;
unsigned long paddr, pmd_phys;
pmd_t *pmd;
paddr = (address & PGDIR_MASK) + i*PUD_SIZE;
if (paddr >= end)
break;
if (!after_bootmem && !e820_any_mapped(paddr, paddr+PUD_SIZE, 0)) {
set_pud(pud, __pud(0));
continue;
}
pmd = alloc_low_page(&map, &pmd_phys);
spin_lock(&init_mm.page_table_lock);
set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
phys_pmd_init(pmd, paddr, end);
spin_unlock(&init_mm.page_table_lock);
unmap_low_page(map);
}
__flush_tlb();
}
static void __init find_early_table_space(unsigned long end)
{
unsigned long puds, pmds, tables, start;
puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
tables = round_up(puds * sizeof(pud_t), PAGE_SIZE) +
round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
/* RED-PEN putting page tables only on node 0 could
cause a hotspot and fill up ZONE_DMA. The page tables
need roughly 0.5KB per GB. */
start = 0x8000;
table_start = find_e820_area(start, end, tables);
if (table_start == -1UL)
panic("Cannot find space for the kernel page tables");
table_start >>= PAGE_SHIFT;
table_end = table_start;
early_printk("kernel direct mapping tables up to %lx @ %lx-%lx\n",
end, table_start << PAGE_SHIFT, table_end << PAGE_SHIFT);
}
/* Setup the direct mapping of the physical memory at PAGE_OFFSET.
This runs before bootmem is initialized and gets pages directly from the
physical memory. To access them they are temporarily mapped. */
void __meminit init_memory_mapping(unsigned long start, unsigned long end)
{
unsigned long next;
Dprintk("init_memory_mapping\n");
/*
* Find space for the kernel direct mapping tables.
* Later we should allocate these tables in the local node of the memory
* mapped. Unfortunately this is done currently before the nodes are
* discovered.
*/
if (!after_bootmem)
find_early_table_space(end);
start = (unsigned long)__va(start);
end = (unsigned long)__va(end);
for (; start < end; start = next) {
int map;
unsigned long pud_phys;
pgd_t *pgd = pgd_offset_k(start);
pud_t *pud;
if (after_bootmem)
pud = pud_offset(pgd, start & PGDIR_MASK);
else
pud = alloc_low_page(&map, &pud_phys);
next = start + PGDIR_SIZE;
if (next > end)
next = end;
phys_pud_init(pud, __pa(start), __pa(next));
if (!after_bootmem)
set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
unmap_low_page(map);
}
if (!after_bootmem)
asm volatile("movq %%cr4,%0" : "=r" (mmu_cr4_features));
__flush_tlb_all();
}
void __cpuinit zap_low_mappings(int cpu)
{
if (cpu == 0) {
pgd_t *pgd = pgd_offset_k(0UL);
pgd_clear(pgd);
} else {
/*
* For AP's, zap the low identity mappings by changing the cr3
* to init_level4_pgt and doing local flush tlb all
*/
asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt)));
}
__flush_tlb_all();
}
[PATCH] x86_64: Add 4GB DMA32 zone Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 00:25:53 +08:00
/* Compute zone sizes for the DMA and DMA32 zones in a node. */
__init void
size_zones(unsigned long *z, unsigned long *h,
unsigned long start_pfn, unsigned long end_pfn)
{
int i;
unsigned long w;
for (i = 0; i < MAX_NR_ZONES; i++)
z[i] = 0;
if (start_pfn < MAX_DMA_PFN)
z[ZONE_DMA] = MAX_DMA_PFN - start_pfn;
if (start_pfn < MAX_DMA32_PFN) {
unsigned long dma32_pfn = MAX_DMA32_PFN;
if (dma32_pfn > end_pfn)
dma32_pfn = end_pfn;
z[ZONE_DMA32] = dma32_pfn - start_pfn;
}
z[ZONE_NORMAL] = end_pfn - start_pfn;
/* Remove lower zones from higher ones. */
w = 0;
for (i = 0; i < MAX_NR_ZONES; i++) {
if (z[i])
z[i] -= w;
w += z[i];
}
/* Compute holes */
w = start_pfn;
[PATCH] x86_64: Add 4GB DMA32 zone Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 00:25:53 +08:00
for (i = 0; i < MAX_NR_ZONES; i++) {
unsigned long s = w;
w += z[i];
h[i] = e820_hole_size(s, w);
}
/* Add the space pace needed for mem_map to the holes too. */
for (i = 0; i < MAX_NR_ZONES; i++)
h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE;
/* The 16MB DMA zone has the kernel and other misc mappings.
Account them too */
if (h[ZONE_DMA]) {
h[ZONE_DMA] += dma_reserve;
if (h[ZONE_DMA] >= z[ZONE_DMA]) {
printk(KERN_WARNING
"Kernel too large and filling up ZONE_DMA?\n");
h[ZONE_DMA] = z[ZONE_DMA];
}
}
[PATCH] x86_64: Add 4GB DMA32 zone Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 00:25:53 +08:00
}
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
[PATCH] x86_64: Add 4GB DMA32 zone Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 00:25:53 +08:00
unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES];
memory_present(0, 0, end_pfn);
sparse_init();
[PATCH] x86_64: Add 4GB DMA32 zone Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 00:25:53 +08:00
size_zones(zones, holes, 0, end_pfn);
free_area_init_node(0, NODE_DATA(0), zones,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
}
#endif
/* Unmap a kernel mapping if it exists. This is useful to avoid prefetches
from the CPU leading to inconsistent cache lines. address and size
must be aligned to 2MB boundaries.
Does nothing when the mapping doesn't exist. */
void __init clear_kernel_mapping(unsigned long address, unsigned long size)
{
unsigned long end = address + size;
BUG_ON(address & ~LARGE_PAGE_MASK);
BUG_ON(size & ~LARGE_PAGE_MASK);
for (; address < end; address += LARGE_PAGE_SIZE) {
pgd_t *pgd = pgd_offset_k(address);
pud_t *pud;
pmd_t *pmd;
if (pgd_none(*pgd))
continue;
pud = pud_offset(pgd, address);
if (pud_none(*pud))
continue;
pmd = pmd_offset(pud, address);
if (!pmd || pmd_none(*pmd))
continue;
if (0 == (pmd_val(*pmd) & _PAGE_PSE)) {
/* Could handle this, but it should not happen currently. */
printk(KERN_ERR
"clear_kernel_mapping: mapping has been split. will leak memory\n");
pmd_ERROR(*pmd);
}
set_pmd(pmd, __pmd(0));
}
__flush_tlb_all();
}
/*
* Memory hotplug specific functions
*/
#if defined(CONFIG_ACPI_HOTPLUG_MEMORY) || defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)
void online_page(struct page *page)
{
ClearPageReserved(page);
init_page_count(page);
__free_page(page);
totalram_pages++;
num_physpages++;
}
#ifndef CONFIG_MEMORY_HOTPLUG
/*
* Memory Hotadd without sparsemem. The mem_maps have been allocated in advance,
* just online the pages.
*/
int __add_pages(struct zone *z, unsigned long start_pfn, unsigned long nr_pages)
{
int err = -EIO;
unsigned long pfn;
unsigned long total = 0, mem = 0;
for (pfn = start_pfn; pfn < start_pfn + nr_pages; pfn++) {
[PATCH] x86_64: Reserve SRAT hotadd memory on x86-64 From: Keith Mannthey, Andi Kleen Implement memory hotadd without sparsemem. The memory in the SRAT hotadd area is just preserved instead and can be activated later. There are a few restrictions: - Only one continuous hotadd area allowed per node The main problem is dealing with the many buggy SRAT tables that are out there. The strategy here is to reject anything suspicious. Originally from Keith Mannthey, with several hacks and changes by AK and also contributions from Andrew Morton [ TBD: Problems pointed out by KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>: 1) Goto's rebuild_zonelist patch will not work if CONFIG_MEMORY_HOTPLUG=n. Rebuilding zonelist is necessary when the system has just memory < 4G at boot, and hot add memory > 4G. because x86_64 has DMA32, ZONE_NORAML is not included into zonelist at boot time if system doesn't have memory >4G at boot. [AK: should just force the higher zones at boot time when SRAT tells us] 2) zone and node's spanned_pages and present_pages are not incremented. They should be. For example, our server (ia64/Fujitsu PrimeQuest) can equip memory from 4G to 1T(maybe 2T in future), and SRAT will *always* say we have possible 1T +memory. (Microsoft requires "write all possible memory in SRAT") When we reserve memmap for possible 1T memory, Linux will not work well in +minimum 4G configuraion ;) [AK: needs limiting to 5-10% of max memory] ] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-08 01:49:18 +08:00
if (pfn_valid(pfn)) {
online_page(pfn_to_page(pfn));
err = 0;
mem++;
}
total++;
}
if (!err) {
z->spanned_pages += total;
z->present_pages += mem;
z->zone_pgdat->node_spanned_pages += total;
z->zone_pgdat->node_present_pages += mem;
}
return err;
}
#endif
/*
* Memory is added always to NORMAL zone. This means you will never get
* additional DMA/DMA32 memory.
*/
int add_memory(u64 start, u64 size)
{
struct pglist_data *pgdat = NODE_DATA(0);
struct zone *zone = pgdat->node_zones + MAX_NR_ZONES-2;
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
int ret;
ret = __add_pages(zone, start_pfn, nr_pages);
if (ret)
goto error;
init_memory_mapping(start, (start + size -1));
return ret;
error:
printk("%s: Problem encountered in __add_pages!\n", __func__);
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
int remove_memory(u64 start, u64 size)
{
return -EINVAL;
}
EXPORT_SYMBOL_GPL(remove_memory);
#endif
static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules,
kcore_vsyscall;
void __init mem_init(void)
{
long codesize, reservedpages, datasize, initsize;
pci_iommu_alloc();
/* How many end-of-memory variables you have, grandma! */
max_low_pfn = end_pfn;
max_pfn = end_pfn;
num_physpages = end_pfn;
high_memory = (void *) __va(end_pfn * PAGE_SIZE);
/* clear the zero-page */
memset(empty_zero_page, 0, PAGE_SIZE);
reservedpages = 0;
/* this will put all low memory onto the freelists */
#ifdef CONFIG_NUMA
totalram_pages = numa_free_all_bootmem();
#else
totalram_pages = free_all_bootmem();
#endif
reservedpages = end_pfn - totalram_pages - e820_hole_size(0, end_pfn);
after_bootmem = 1;
codesize = (unsigned long) &_etext - (unsigned long) &_text;
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
/* Register memory areas for /proc/kcore */
kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
VMALLOC_END-VMALLOC_START);
kclist_add(&kcore_kernel, &_stext, _end - _stext);
kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN);
kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START,
VSYSCALL_END - VSYSCALL_START);
printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, %ldk data, %ldk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
end_pfn << (PAGE_SHIFT-10),
codesize >> 10,
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10);
#ifdef CONFIG_SMP
/*
* Sync boot_level4_pgt mappings with the init_level4_pgt
* except for the low identity mappings which are already zapped
* in init_level4_pgt. This sync-up is essential for AP's bringup
*/
memcpy(boot_level4_pgt+1, init_level4_pgt+1, (PTRS_PER_PGD-1)*sizeof(pgd_t));
#endif
}
void free_init_pages(char *what, unsigned long begin, unsigned long end)
{
unsigned long addr;
if (begin >= end)
return;
printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
for (addr = begin; addr < end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
memset((void *)(addr & ~(PAGE_SIZE-1)), 0xcc, PAGE_SIZE);
free_page(addr);
totalram_pages++;
}
}
void free_initmem(void)
{
memset(__initdata_begin, 0xba, __initdata_end - __initdata_begin);
free_init_pages("unused kernel memory",
(unsigned long)(&__init_begin),
(unsigned long)(&__init_end));
}
#ifdef CONFIG_DEBUG_RODATA
extern char __start_rodata, __end_rodata;
void mark_rodata_ro(void)
{
unsigned long addr = (unsigned long)&__start_rodata;
for (; addr < (unsigned long)&__end_rodata; addr += PAGE_SIZE)
change_page_attr_addr(addr, 1, PAGE_KERNEL_RO);
printk ("Write protecting the kernel read-only data: %luk\n",
(&__end_rodata - &__start_rodata) >> 10);
/*
* change_page_attr_addr() requires a global_flush_tlb() call after it.
* We do this after the printk so that if something went wrong in the
* change, the printk gets out at least to give a better debug hint
* of who is the culprit.
*/
global_flush_tlb();
}
#endif
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
free_init_pages("initrd memory", start, end);
}
#endif
void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
{
/* Should check here against the e820 map to avoid double free */
#ifdef CONFIG_NUMA
int nid = phys_to_nid(phys);
reserve_bootmem_node(NODE_DATA(nid), phys, len);
#else
reserve_bootmem(phys, len);
#endif
if (phys+len <= MAX_DMA_PFN*PAGE_SIZE)
dma_reserve += len / PAGE_SIZE;
}
int kern_addr_valid(unsigned long addr)
{
unsigned long above = ((long)addr) >> __VIRTUAL_MASK_SHIFT;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
if (above != 0 && above != -1UL)
return 0;
pgd = pgd_offset_k(addr);
if (pgd_none(*pgd))
return 0;
pud = pud_offset(pgd, addr);
if (pud_none(*pud))
return 0;
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return 0;
if (pmd_large(*pmd))
return pfn_valid(pmd_pfn(*pmd));
pte = pte_offset_kernel(pmd, addr);
if (pte_none(*pte))
return 0;
return pfn_valid(pte_pfn(*pte));
}
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
extern int exception_trace, page_fault_trace;
static ctl_table debug_table2[] = {
{ 99, "exception-trace", &exception_trace, sizeof(int), 0644, NULL,
proc_dointvec },
{ 0, }
};
static ctl_table debug_root_table2[] = {
{ .ctl_name = CTL_DEBUG, .procname = "debug", .mode = 0555,
.child = debug_table2 },
{ 0 },
};
static __init int x8664_sysctl_init(void)
{
register_sysctl_table(debug_root_table2, 1);
return 0;
}
__initcall(x8664_sysctl_init);
#endif
/* A pseudo VMAs to allow ptrace access for the vsyscall page. This only
covers the 64bit vsyscall page now. 32bit has a real VMA now and does
not need special handling anymore. */
static struct vm_area_struct gate_vma = {
.vm_start = VSYSCALL_START,
.vm_end = VSYSCALL_END,
.vm_page_prot = PAGE_READONLY
};
struct vm_area_struct *get_gate_vma(struct task_struct *tsk)
{
#ifdef CONFIG_IA32_EMULATION
if (test_tsk_thread_flag(tsk, TIF_IA32))
return NULL;
#endif
return &gate_vma;
}
int in_gate_area(struct task_struct *task, unsigned long addr)
{
struct vm_area_struct *vma = get_gate_vma(task);
if (!vma)
return 0;
return (addr >= vma->vm_start) && (addr < vma->vm_end);
}
/* Use this when you have no reliable task/vma, typically from interrupt
* context. It is less reliable than using the task's vma and may give
* false positives.
*/
int in_gate_area_no_task(unsigned long addr)
{
return (addr >= VSYSCALL_START) && (addr < VSYSCALL_END);
}