renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
b529d1b382
linux-next/fs/ceph/mds_client.c

4117 lines
105 KiB
C
Raw Normal View History

ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/ceph_debug.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: switch from BKL to lock_flocks() Switch from using the BKL explicitly to the new lock_flocks() interface. Eventually this will turn into a spinlock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-23 10:57:10 +08:00
#include <linux/fs.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
#include <linux/wait.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
#include <linux/gfp.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
#include <linux/sched.h>
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/debugfs.h>
#include <linux/seq_file.h>
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
#include <linux/utsname.h>
ceph: ratelimit warn messages for MDS closes session Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-22 16:38:02 +08:00
#include <linux/ratelimit.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
#include "super.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include "mds_client.h"
libceph: move feature bits to separate header This is simply cleanup that will keep things more closely synced with the userland code. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-31 07:23:22 +08:00
#include <linux/ceph/ceph_features.h>
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/messenger.h>
#include <linux/ceph/decode.h>
#include <linux/ceph/pagelist.h>
#include <linux/ceph/auth.h>
#include <linux/ceph/debugfs.h>
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* A cluster of MDS (metadata server) daemons is responsible for
* managing the file system namespace (the directory hierarchy and
* inodes) and for coordinating shared access to storage. Metadata is
* partitioning hierarchically across a number of servers, and that
* partition varies over time as the cluster adjusts the distribution
* in order to balance load.
*
* The MDS client is primarily responsible to managing synchronous
* metadata requests for operations like open, unlink, and so forth.
* If there is a MDS failure, we find out about it when we (possibly
* request and) receive a new MDS map, and can resubmit affected
* requests.
*
* For the most part, though, we take advantage of a lossless
* communications channel to the MDS, and do not need to worry about
* timing out or resubmitting requests.
*
* We maintain a stateful "session" with each MDS we interact with.
* Within each session, we sent periodic heartbeat messages to ensure
* any capabilities or leases we have been issues remain valid. If
* the session times out and goes stale, our leases and capabilities
* are no longer valid.
*/
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
struct ceph_reconnect_state {
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
int nr_caps;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
struct ceph_pagelist *pagelist;
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
unsigned msg_version;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
};
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
static void __wake_requests(struct ceph_mds_client *mdsc,
struct list_head *head);
ceph: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-20 16:40:19 +08:00
static const struct ceph_connection_operations mds_con_ops;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* mds reply parsing
*/
/*
* parse individual inode info
*/
static int parse_reply_info_in(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
struct ceph_mds_reply_info_in *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
int err = -EIO;
info->in = *p;
*p += sizeof(struct ceph_mds_reply_inode) +
sizeof(*info->in->fragtree.splits) *
le32_to_cpu(info->in->fragtree.nsplits);
ceph_decode_32_safe(p, end, info->symlink_len, bad);
ceph_decode_need(p, end, info->symlink_len, bad);
info->symlink = *p;
*p += info->symlink_len;
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
if (features & CEPH_FEATURE_DIRLAYOUTHASH)
ceph_decode_copy_safe(p, end, &info->dir_layout,
sizeof(info->dir_layout), bad);
else
memset(&info->dir_layout, 0, sizeof(info->dir_layout));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_decode_32_safe(p, end, info->xattr_len, bad);
ceph_decode_need(p, end, info->xattr_len, bad);
info->xattr_data = *p;
*p += info->xattr_len;
ceph: parse inline data in MClientReply and MClientCaps Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 21:29:55 +08:00
if (features & CEPH_FEATURE_MDS_INLINE_DATA) {
ceph_decode_64_safe(p, end, info->inline_version, bad);
ceph_decode_32_safe(p, end, info->inline_len, bad);
ceph_decode_need(p, end, info->inline_len, bad);
info->inline_data = *p;
*p += info->inline_len;
} else
info->inline_version = CEPH_INLINE_NONE;
ceph: rados pool namespace support This patch adds codes that decode pool namespace information in cap message and request reply. Pool namespace is saved in i_layout, it will be passed to libceph when doing read/write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-07 09:35:06 +08:00
info->pool_ns_len = 0;
info->pool_ns_data = NULL;
ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support Add support for the format change of MClientReply/MclientCaps. Also add code that denies access to inodes with pool_ns layouts. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-14 18:06:41 +08:00
if (features & CEPH_FEATURE_FS_FILE_LAYOUT_V2) {
ceph_decode_32_safe(p, end, info->pool_ns_len, bad);
ceph: rados pool namespace support This patch adds codes that decode pool namespace information in cap message and request reply. Pool namespace is saved in i_layout, it will be passed to libceph when doing read/write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-07 09:35:06 +08:00
if (info->pool_ns_len > 0) {
ceph_decode_need(p, end, info->pool_ns_len, bad);
info->pool_ns_data = *p;
*p += info->pool_ns_len;
}
ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support Add support for the format change of MClientReply/MclientCaps. Also add code that denies access to inodes with pool_ns layouts. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-14 18:06:41 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return 0;
bad:
return err;
}
/*
* parse a normal reply, which may contain a (dir+)dentry and/or a
* target inode.
*/
static int parse_reply_info_trace(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
struct ceph_mds_reply_info_parsed *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
int err;
if (info->head->is_dentry) {
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
err = parse_reply_info_in(p, end, &info->diri, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err < 0)
goto out_bad;
if (unlikely(*p + sizeof(*info->dirfrag) > end))
goto bad;
info->dirfrag = *p;
*p += sizeof(*info->dirfrag) +
sizeof(u32)*le32_to_cpu(info->dirfrag->ndist);
if (unlikely(*p > end))
goto bad;
ceph_decode_32_safe(p, end, info->dname_len, bad);
ceph_decode_need(p, end, info->dname_len, bad);
info->dname = *p;
*p += info->dname_len;
info->dlease = *p;
*p += sizeof(*info->dlease);
}
if (info->head->is_target) {
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
err = parse_reply_info_in(p, end, &info->targeti, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err < 0)
goto out_bad;
}
if (unlikely(*p != end))
goto bad;
return 0;
bad:
err = -EIO;
out_bad:
pr_err("problem parsing mds trace %d\n", err);
return err;
}
/*
* parse readdir results
*/
static int parse_reply_info_dir(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
struct ceph_mds_reply_info_parsed *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
u32 num, i = 0;
int err;
info->dir_dir = *p;
if (*p + sizeof(*info->dir_dir) > end)
goto bad;
*p += sizeof(*info->dir_dir) +
sizeof(u32)*le32_to_cpu(info->dir_dir->ndist);
if (*p > end)
goto bad;
ceph_decode_need(p, end, sizeof(num) + 2, bad);
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 00:59:09 +08:00
num = ceph_decode_32(p);
ceph: define 'end/complete' in readdir reply as bit flags Set a flag in readdir request, which indicates that client interprets 'end/complete' as bit flags. So that mds can reply additional flags in readdir reply. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-27 17:48:30 +08:00
{
u16 flags = ceph_decode_16(p);
info->dir_end = !!(flags & CEPH_READDIR_FRAG_END);
info->dir_complete = !!(flags & CEPH_READDIR_FRAG_COMPLETE);
ceph: using hash value to compose dentry offset If MDS sorts dentries in dirfrag in hash order, we use hash value to compose dentry offset. dentry offset is: (0xff << 52) | ((24 bits hash) << 28) | (the nth entry hash hash collision) This offset is stable across directory fragmentation. This alos means there is no need to reset readdir offset if directory get fragmented in the middle of readdir. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-29 11:27:30 +08:00
info->hash_order = !!(flags & CEPH_READDIR_HASH_ORDER);
ceph: make seeky readdir more efficient Current cephfs client uses string to indicate start position of readdir. The string is last entry of previous readdir reply. This approach does not work for seeky readdir because we can not easily convert the new postion to a string. For seeky readdir, mds needs to return dentries from the beginning. Client keeps retrying if the reply does not contain the dentry it wants. In current version of ceph, mds sorts CDentry in its cache in hash order. Client also uses dentry hash to compose dir postion. For seeky readdir, if client passes the hash part of dir postion to mds. mds can avoid replying useless dentries. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-06 00:54:05 +08:00
info->offset_hash = !!(flags & CEPH_READDIR_OFFSET_HASH);
ceph: define 'end/complete' in readdir reply as bit flags Set a flag in readdir request, which indicates that client interprets 'end/complete' as bit flags. So that mds can reply additional flags in readdir reply. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-27 17:48:30 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (num == 0)
goto done;
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
BUG_ON(!info->dir_entries);
if ((unsigned long)(info->dir_entries + num) >
(unsigned long)info->dir_entries + info->dir_buf_size) {
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
pr_err("dir contents are larger than expected\n");
WARN_ON(1);
goto bad;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
info->dir_nr = num;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
while (num) {
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
struct ceph_mds_reply_dir_entry *rde = info->dir_entries + i;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* dentry */
ceph_decode_need(p, end, sizeof(u32)*2, bad);
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
rde->name_len = ceph_decode_32(p);
ceph_decode_need(p, end, rde->name_len, bad);
rde->name = *p;
*p += rde->name_len;
dout("parsed dir dname '%.*s'\n", rde->name_len, rde->name);
rde->lease = *p;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*p += sizeof(struct ceph_mds_reply_lease);
/* inode */
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
err = parse_reply_info_in(p, end, &rde->inode, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err < 0)
goto out_bad;
ceph: record 'offset' for each entry of readdir result This is preparation for using hash value as dentry 'offset' Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 15:17:40 +08:00
/* ceph_readdir_prepopulate() will update it */
rde->offset = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
i++;
num--;
}
done:
if (*p != end)
goto bad;
return 0;
bad:
err = -EIO;
out_bad:
pr_err("problem parsing dir contents %d\n", err);
return err;
}
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
/*
* parse fcntl F_GETLK results
*/
static int parse_reply_info_filelock(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
struct ceph_mds_reply_info_parsed *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
{
if (*p + sizeof(*info->filelock_reply) > end)
goto bad;
info->filelock_reply = *p;
*p += sizeof(*info->filelock_reply);
if (unlikely(*p != end))
goto bad;
return 0;
bad:
return -EIO;
}
ceph: Check for created flag in response from mds The mds now sends back a created inode if the create request performed the create. If the file already existed, no inode is returned in the reply. This allows ceph to set the created flag in atomic_open so that permissions are properly checked in the case that the file wasn't created by the create call to the mds. To ensure compability with previous kernels, a feature for sending back the inode in the create reply was added, so that the mds will only send back the inode if the client indicates it supports the feature. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-29 01:56:46 +08:00
/*
* parse create results
*/
static int parse_reply_info_create(void **p, void *end,
struct ceph_mds_reply_info_parsed *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: Check for created flag in response from mds The mds now sends back a created inode if the create request performed the create. If the file already existed, no inode is returned in the reply. This allows ceph to set the created flag in atomic_open so that permissions are properly checked in the case that the file wasn't created by the create call to the mds. To ensure compability with previous kernels, a feature for sending back the inode in the create reply was added, so that the mds will only send back the inode if the client indicates it supports the feature. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-29 01:56:46 +08:00
{
if (features & CEPH_FEATURE_REPLY_CREATE_INODE) {
if (*p == end) {
info->has_create_ino = false;
} else {
info->has_create_ino = true;
info->ino = ceph_decode_64(p);
}
}
if (unlikely(*p != end))
goto bad;
return 0;
bad:
return -EIO;
}
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
/*
* parse extra results
*/
static int parse_reply_info_extra(void **p, void *end,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
struct ceph_mds_reply_info_parsed *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
{
ceph: fix bad endianness handling in parse_reply_info_extra sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Cc: stable@vger.kernel.org # needs backporting for < 3.14 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-13 03:42:41 +08:00
u32 op = le32_to_cpu(info->head->op);
if (op == CEPH_MDS_OP_GETFILELOCK)
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
return parse_reply_info_filelock(p, end, info, features);
ceph: fix bad endianness handling in parse_reply_info_extra sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Cc: stable@vger.kernel.org # needs backporting for < 3.14 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-13 03:42:41 +08:00
else if (op == CEPH_MDS_OP_READDIR || op == CEPH_MDS_OP_LSSNAP)
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
return parse_reply_info_dir(p, end, info, features);
ceph: fix bad endianness handling in parse_reply_info_extra sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Cc: stable@vger.kernel.org # needs backporting for < 3.14 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-13 03:42:41 +08:00
else if (op == CEPH_MDS_OP_CREATE)
ceph: Check for created flag in response from mds The mds now sends back a created inode if the create request performed the create. If the file already existed, no inode is returned in the reply. This allows ceph to set the created flag in atomic_open so that permissions are properly checked in the case that the file wasn't created by the create call to the mds. To ensure compability with previous kernels, a feature for sending back the inode in the create reply was added, so that the mds will only send back the inode if the client indicates it supports the feature. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-29 01:56:46 +08:00
return parse_reply_info_create(p, end, info, features);
else
return -EIO;
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* parse entire mds reply
*/
static int parse_reply_info(struct ceph_msg *msg,
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
struct ceph_mds_reply_info_parsed *info,
libceph: all features fields must be u64 In preparation for ceph_features.h update, change all features fields from unsigned int/u32 to u64. (ceph.git has ~40 feature bits at this point.) Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-12-25 03:19:23 +08:00
u64 features)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
void *p, *end;
u32 len;
int err;
info->head = msg->front.iov_base;
p = msg->front.iov_base + sizeof(struct ceph_mds_reply_head);
end = p + msg->front.iov_len - sizeof(struct ceph_mds_reply_head);
/* trace */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
ceph: fix length validation in parse_reply_info() "len" is read from network and thus needs validation. Otherwise, given a bogus "len" value, p+len could be an out-of-bounds pointer, which is used in further parsing. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-15 11:20:59 +08:00
ceph_decode_need(&p, end, len, bad);
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
err = parse_reply_info_trace(&p, p+len, info, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err < 0)
goto out_bad;
}
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
/* extra */
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
ceph: fix length validation in parse_reply_info() "len" is read from network and thus needs validation. Otherwise, given a bogus "len" value, p+len could be an out-of-bounds pointer, which is used in further parsing. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-15 11:20:59 +08:00
ceph_decode_need(&p, end, len, bad);
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
err = parse_reply_info_extra(&p, p+len, info, features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err < 0)
goto out_bad;
}
/* snap blob */
ceph_decode_32_safe(&p, end, len, bad);
info->snapblob_len = len;
info->snapblob = p;
p += len;
if (p != end)
goto bad;
return 0;
bad:
err = -EIO;
out_bad:
pr_err("mds parse_reply err %d\n", err);
return err;
}
static void destroy_reply_info(struct ceph_mds_reply_info_parsed *info)
{
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
if (!info->dir_entries)
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
return;
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
free_pages((unsigned long)info->dir_entries, get_order(info->dir_buf_size));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* sessions
*/
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
const char *ceph_session_state_name(int s)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
switch (s) {
case CEPH_MDS_SESSION_NEW: return "new";
case CEPH_MDS_SESSION_OPENING: return "opening";
case CEPH_MDS_SESSION_OPEN: return "open";
case CEPH_MDS_SESSION_HUNG: return "hung";
case CEPH_MDS_SESSION_CLOSING: return "closing";
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
case CEPH_MDS_SESSION_RESTARTING: return "restarting";
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
case CEPH_MDS_SESSION_RECONNECTING: return "reconnecting";
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
case CEPH_MDS_SESSION_REJECTED: return "rejected";
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
default: return "???";
}
}
static struct ceph_mds_session *get_session(struct ceph_mds_session *s)
{
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
if (refcount_inc_not_zero(&s->s_ref)) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("mdsc get_session %p %d -> %d\n", s,
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
refcount_read(&s->s_ref)-1, refcount_read(&s->s_ref));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return s;
} else {
dout("mdsc get_session %p 0 -- FAIL", s);
return NULL;
}
}
void ceph_put_mds_session(struct ceph_mds_session *s)
{
dout("mdsc put_session %p %d -> %d\n", s,
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
refcount_read(&s->s_ref), refcount_read(&s->s_ref)-1);
if (refcount_dec_and_test(&s->s_ref)) {
ceph: define ceph_auth_handshake type The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:38 +08:00
if (s->s_auth.authorizer)
libceph: make authorizer destruction independent of ceph_auth_client Starting the kernel client with cephx disabled and then enabling cephx and restarting userspace daemons can result in a crash: [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000 [262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130 [262671.584334] PGD 0 [262671.635847] Oops: 0000 [#1] SMP [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014 [262672.268937] Workqueue: ceph-msgr con_work [libceph] [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000 [262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130 [262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286 [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018 [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012 [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000 [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40 [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840 [262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000 [262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0 [262673.417556] Stack: [262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04 [262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00 [262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800 [262673.805230] Call Trace: [262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph] [262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph] [262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph] [262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph] [262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph] [262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph] [262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph] [262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph] [262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph] [262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690 [262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph] [262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0 [262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470 [262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310 [262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0 [262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 [262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70 [262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 What happens is the following: (1) new MON session is established (2) old "none" ac is destroyed (3) new "cephx" ac is constructed ... (4) old OSD session (w/ "none" authorizer) is put ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer) osd->o_auth.authorizer in the "none" case is just a bare pointer into ac, which contains a single static copy for all services. By the time we get to (4), "none" ac, freed in (2), is long gone. On top of that, a new vtable installed in (3) points us at ceph_x_destroy_authorizer(), so we end up trying to destroy a "none" authorizer with a "cephx" destructor operating on invalid memory! To fix this, decouple authorizer destruction from ac and do away with a single static "none" authorizer by making a copy for each OSD or MDS session. Authorizers themselves are independent of ac and so there is no reason for destroy_authorizer() to be an ac op. Make it an op on the authorizer itself by turning ceph_authorizer into a real struct. Fixes: http://tracker.ceph.com/issues/15447 Reported-by: Alan Zhang <alan.zhang@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-04-12 01:34:49 +08:00
ceph_auth_destroy_authorizer(s->s_auth.authorizer);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
kfree(s);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* called under mdsc->mutex
*/
struct ceph_mds_session *__ceph_lookup_mds_session(struct ceph_mds_client *mdsc,
int mds)
{
struct ceph_mds_session *session;
if (mds >= mdsc->max_sessions || mdsc->sessions[mds] == NULL)
return NULL;
session = mdsc->sessions[mds];
dout("lookup_mds_session %p %d\n", session,
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
refcount_read(&session->s_ref));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
get_session(session);
return session;
}
static bool __have_session(struct ceph_mds_client *mdsc, int mds)
{
if (mds >= mdsc->max_sessions)
return false;
return mdsc->sessions[mds];
}
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
static int __verify_registered_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *s)
{
if (s->s_mds >= mdsc->max_sessions ||
mdsc->sessions[s->s_mds] != s)
return -ENOENT;
return 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* create+register a new session for given mds.
* called under mdsc->mutex.
*/
static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
int mds)
{
struct ceph_mds_session *s;
ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds mdsmap::m_max_mds is the expected count of active mds. It's not the max rank of active mds. User can decrease mdsmap::m_max_mds, but does not stop mds whose rank >= mdsmap::m_max_mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:04:13 +08:00
if (mds >= mdsc->mdsmap->m_num_mds)
ceph: fix null pointer dereference When register_session() is given an out-of-range argument for mds, ceph_mdsmap_get_addr() will return a null pointer, which would be given to ceph_con_open() & be dereferenced, causing a kernel oops. This fixes bug #4685 in the Ceph bug tracker <http://tracker.ceph.com/issues/4685>. Signed-off-by: Nathaniel Yazdani <n1ght.4nd.d4y@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-05 12:04:30 +08:00
return ERR_PTR(-EINVAL);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
s = kzalloc(sizeof(*s), GFP_NOFS);
ceph: handle kmalloc() failure Return ERR_PTR(-ENOMEM) if kmalloc() fails. We handle allocation failures the same way later in the function. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-20 20:30:16 +08:00
if (!s)
return ERR_PTR(-ENOMEM);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
s->s_mdsc = mdsc;
s->s_mds = mds;
s->s_state = CEPH_MDS_SESSION_NEW;
s->s_ttl = 0;
s->s_seq = 0;
mutex_init(&s->s_mutex);
libceph: set peer name on con_open, not init The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil <sage@inktank.com>
2012-06-28 03:24:08 +08:00
ceph_con_init(&s->s_con, s, &mds_con_ops, &mdsc->fsc->client->msgr);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:10 +08:00
spin_lock_init(&s->s_gen_ttl_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
s->s_cap_gen = 0;
ceph: don't reset s_cap_ttl to zero Avoid the need to check for a special zero s_cap_ttl value by just using (jiffies - 1) as the value assigned to indicate "sometime in the past." Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:11 +08:00
s->s_cap_ttl = jiffies - 1;
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:10 +08:00
spin_lock_init(&s->s_cap_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
s->s_renew_requested = 0;
s->s_renew_seq = 0;
INIT_LIST_HEAD(&s->s_caps);
s->s_nr_caps = 0;
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 12:40:34 +08:00
s->s_trim_caps = 0;
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
refcount_set(&s->s_ref, 1);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_LIST_HEAD(&s->s_waiting);
INIT_LIST_HEAD(&s->s_unsafe);
s->s_num_cap_releases = 0;
ceph: handle race between cap reconnect and cap release When a cap get released while composing the cap reconnect message. We should skip queuing the release message if the cap hasn't been added to the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 11:08:14 +08:00
s->s_cap_reconnect = 0;
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
s->s_cap_iterator = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_LIST_HEAD(&s->s_cap_releases);
INIT_LIST_HEAD(&s->s_cap_flushing);
dout("register_session mds%d\n", mds);
if (mds >= mdsc->max_sessions) {
int newmax = 1 << get_count_order(mds+1);
struct ceph_mds_session **sa;
dout("register_session realloc to %d\n", newmax);
sa = kcalloc(newmax, sizeof(void *), GFP_NOFS);
if (sa == NULL)
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 03:22:36 +08:00
goto fail_realloc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (mdsc->sessions) {
memcpy(sa, mdsc->sessions,
mdsc->max_sessions * sizeof(void *));
kfree(mdsc->sessions);
}
mdsc->sessions = sa;
mdsc->max_sessions = newmax;
}
mdsc->sessions[mds] = s;
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions) use an atomic variable to track number of sessions, this can avoid block operation inside wait loops. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-09 17:00:42 +08:00
atomic_inc(&mdsc->num_sessions);
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
refcount_inc(&s->s_ref); /* one ref to sessions[], one to caller */
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 03:22:36 +08:00
libceph: set peer name on con_open, not init The peer name may change on each open attempt, even when the connection is reused. Signed-off-by: Sage Weil <sage@inktank.com>
2012-06-28 03:24:08 +08:00
ceph_con_open(&s->s_con, CEPH_ENTITY_TYPE_MDS, mds,
ceph_mdsmap_get_addr(mdsc->mdsmap, mds));
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 03:22:36 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return s;
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 03:22:36 +08:00
fail_realloc:
kfree(s);
return ERR_PTR(-ENOMEM);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* called under mdsc->mutex
*/
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
static void __unregister_session(struct ceph_mds_client *mdsc,
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 03:22:36 +08:00
struct ceph_mds_session *s)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
dout("__unregister_session mds%d %p\n", s->s_mds, s);
BUG_ON(mdsc->sessions[s->s_mds] != s);
ceph: remove bad calls to ceph_con_shutdown We want to ceph_con_close when we're done with the connection, before the ref count reaches 0. Once it does, do not call ceph_con_shutdown, as that takes the con mutex and may sleep, and besides that is unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 03:22:36 +08:00
mdsc->sessions[s->s_mds] = NULL;
ceph_con_close(&s->s_con);
ceph_put_mds_session(s);
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions) use an atomic variable to track number of sessions, this can avoid block operation inside wait loops. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-09 17:00:42 +08:00
atomic_dec(&mdsc->num_sessions);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* drop session refs in request.
*
* should be last request ref, or hold mdsc->mutex
*/
static void put_request_session(struct ceph_mds_request *req)
{
if (req->r_session) {
ceph_put_mds_session(req->r_session);
req->r_session = NULL;
}
}
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
void ceph_mdsc_release_request(struct kref *kref)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
struct ceph_mds_request *req = container_of(kref,
struct ceph_mds_request,
r_kref);
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
destroy_reply_info(&req->r_reply_info);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
if (req->r_request)
ceph_msg_put(req->r_request);
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
if (req->r_reply)
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
ceph_msg_put(req->r_reply);
if (req->r_inode) {
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:14 +08:00
ceph_put_cap_refs(ceph_inode(req->r_inode), CEPH_CAP_PIN);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
iput(req->r_inode);
}
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
if (req->r_parent)
ceph_put_cap_refs(ceph_inode(req->r_parent), CEPH_CAP_PIN);
ceph, rbd: delete unnecessary checks before two function calls The functions ceph_put_snap_context() and iput() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [idryomov@redhat.com: squashed rbd.c hunk, changelog] Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-11-02 22:20:59 +08:00
iput(req->r_target_inode);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
if (req->r_dentry)
dput(req->r_dentry);
ceph: do not assume r_old_dentry[_dir] always set together Do not assume that r_old_dentry implies that r_old_dentry_dir is also true. Separate out the ref cleanup and make the debugs dump behave when it is NULL. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-02-06 05:40:09 +08:00
if (req->r_old_dentry)
dput(req->r_old_dentry);
if (req->r_old_dentry_dir) {
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:14 +08:00
/*
* track (and drop pins for) r_old_dentry_dir
* separately, since r_old_dentry's d_parent may have
* changed between the dir mutex being dropped and
* this request being freed.
*/
ceph_put_cap_refs(ceph_inode(req->r_old_dentry_dir),
CEPH_CAP_PIN);
iput(req->r_old_dentry_dir);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
kfree(req->r_path1);
kfree(req->r_path2);
ceph: use pagelist to present MDS request data Current code uses page array to present MDS request data. Pages in the array are allocated/freed by caller of ceph_mdsc_do_request(). If request is interrupted, the pages can be freed while they are still being used by the request message. The fix is use pagelist to present MDS request data. Pagelist is reference counted. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 19:15:28 +08:00
if (req->r_pagelist)
ceph_pagelist_release(req->r_pagelist);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
put_request_session(req);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_unreserve_caps(req->r_mdsc, &req->r_caps_reservation);
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
kfree(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
DEFINE_RB_FUNCS(request, struct ceph_mds_request, r_tid, r_node)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* lookup session, bump ref if found.
*
* called under mdsc->mutex.
*/
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
static struct ceph_mds_request *
lookup_get_request(struct ceph_mds_client *mdsc, u64 tid)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
struct ceph_mds_request *req;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
req = lookup_request(&mdsc->request_tree, tid);
if (req)
ceph_mdsc_get_request(req);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
return req;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* Register an in-flight request, and assign a tid. Link to directory
* are modifying (if any).
*
* Called under mdsc->mutex.
*/
static void __register_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req,
struct inode *dir)
{
req->r_tid = ++mdsc->last_tid;
if (req->r_num_caps)
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_reserve_caps(mdsc, &req->r_caps_reservation,
req->r_num_caps);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("__register_request %p tid %lld\n", req, req->r_tid);
ceph_mdsc_get_request(req);
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
insert_request(&mdsc->request_tree, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: fix uid/gid on resent mds requests MDS requests can be rebuilt and resent in non-process context, but were filling in uid/gid from current_fsuid/gid. Put that information in the request struct on request setup. This fixes incorrect (and root) uid/gid getting set for requests that are forwarded between MDSs, usually due to metadata migrations. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 23:28:52 +08:00
req->r_uid = current_fsuid();
req->r_gid = current_fsgid();
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
if (mdsc->oldest_tid == 0 && req->r_op != CEPH_MDS_OP_SETFILELOCK)
mdsc->oldest_tid = req->r_tid;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (dir) {
ceph: take reference on mds request r_unsafe_dir We put ourselves on an inode list for the parent directory of metadata operations so that an fsync on the directory will wait for metadata updates to commit to disk. We weren't holding a reference to that directory, however, and under certain workloads (fsstress in this case) the directory can go away. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 07:12:12 +08:00
ihold(dir);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
req->r_unsafe_dir = dir;
}
}
static void __unregister_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
dout("__unregister_request %p tid %lld\n", req, req->r_tid);
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
ceph: remove req from unsafe list when unregistering it There's no reason a request should ever be on a s_unsafe list but not in the request tree. Cc: stable@vger.kernel.org Link: http://tracker.ceph.com/issues/18474 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-14 23:09:40 +08:00
/* Never leave an unregistered request on an unsafe list! */
list_del_init(&req->r_unsafe_item);
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
if (req->r_tid == mdsc->oldest_tid) {
struct rb_node *p = rb_next(&req->r_node);
mdsc->oldest_tid = 0;
while (p) {
struct ceph_mds_request *next_req =
rb_entry(p, struct ceph_mds_request, r_node);
if (next_req->r_op != CEPH_MDS_OP_SETFILELOCK) {
mdsc->oldest_tid = next_req->r_tid;
break;
}
p = rb_next(p);
}
}
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
erase_request(&mdsc->request_tree, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (req->r_unsafe_dir &&
test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags)) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_inode_info *ci = ceph_inode(req->r_unsafe_dir);
spin_lock(&ci->i_unsafe_lock);
list_del_init(&req->r_unsafe_dir_item);
spin_unlock(&ci->i_unsafe_lock);
ceph: add request to i_unsafe_dirops when getting unsafe reply Previously we add request to i_unsafe_dirops when registering request. So ceph_fsync() also waits for imcomplete requests. This is unnecessary, ceph_fsync() only needs to wait unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 17:18:00 +08:00
}
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (req->r_target_inode &&
test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags)) {
ceph: make fsync() wait unsafe requests that created/modified inode If we get a unsafe reply for request that created/modified inode, add the unsafe request to a list in the newly created/modified inode. So we can make fsync() wait these unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 18:36:06 +08:00
struct ceph_inode_info *ci = ceph_inode(req->r_target_inode);
spin_lock(&ci->i_unsafe_lock);
list_del_init(&req->r_unsafe_target_item);
spin_unlock(&ci->i_unsafe_lock);
}
ceph: take reference on mds request r_unsafe_dir We put ourselves on an inode list for the parent directory of metadata operations so that an fsync on the directory will wait for metadata updates to commit to disk. We weren't holding a reference to that directory, however, and under certain workloads (fsstress in this case) the directory can go away. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 07:12:12 +08:00
ceph: add request to i_unsafe_dirops when getting unsafe reply Previously we add request to i_unsafe_dirops when registering request. So ceph_fsync() also waits for imcomplete requests. This is unnecessary, ceph_fsync() only needs to wait unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 17:18:00 +08:00
if (req->r_unsafe_dir) {
ceph: take reference on mds request r_unsafe_dir We put ourselves on an inode list for the parent directory of metadata operations so that an fsync on the directory will wait for metadata updates to commit to disk. We weren't holding a reference to that directory, however, and under certain workloads (fsstress in this case) the directory can go away. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 07:12:12 +08:00
iput(req->r_unsafe_dir);
req->r_unsafe_dir = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: fix use after free on mds __unregister_request There was a use after free in __unregister_request that would trigger whenever the request map held the last reference. This appears to have triggered an oops during 'umount -f' when requests are being torn down. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-29 12:22:50 +08:00
ceph: wake up 'safe' waiters when unregistering request We also need to wake up 'safe' waiters if error occurs or request aborted. Otherwise sync(2)/fsync(2) may hang forever. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-10-31 09:10:47 +08:00
complete_all(&req->r_safe_completion);
ceph: fix use after free on mds __unregister_request There was a use after free in __unregister_request that would trigger whenever the request map held the last reference. This appears to have triggered an oops during 'umount -f' when requests are being torn down. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-29 12:22:50 +08:00
ceph_mdsc_put_request(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
/*
* Walk back up the dentry tree until we hit a dentry representing a
* non-snapshot inode. We do this using the rcu_read_lock (which must be held
* when calling this) to ensure that the objects won't disappear while we're
* working with them. Once we hit a candidate dentry, we attempt to take a
* reference to it, and return that as the result.
*/
ceph: tidy some white space in get_nonsnap_parent() The white space here seems slightly messed up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-23 18:39:59 +08:00
static struct inode *get_nonsnap_parent(struct dentry *dentry)
{
struct inode *inode = NULL;
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
while (dentry && !IS_ROOT(dentry)) {
inode = d_inode_rcu(dentry);
if (!inode || ceph_snap(inode) == CEPH_NOSNAP)
break;
dentry = dentry->d_parent;
}
if (inode)
inode = igrab(inode);
return inode;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* Choose mds to send request to next. If there is a hint set in the
* request (e.g., due to a prior forward hint from the mds), use that.
* Otherwise, consult frag tree and/or caps to identify the
* appropriate mds. If all else fails, choose randomly.
*
* Called under mdsc->mutex.
*/
static int __choose_mds(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
struct inode *inode;
struct ceph_inode_info *ci;
struct ceph_cap *cap;
int mode = req->r_direct_mode;
int mds = -1;
u32 hash = req->r_direct_hash;
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
bool is_hash = test_bit(CEPH_MDS_R_DIRECT_IS_HASH, &req->r_req_flags);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* is there a specific mds we should try? ignore hint if we have
* no session and the mds is not up (active or recovering).
*/
if (req->r_resend_mds >= 0 &&
(__have_session(mdsc, req->r_resend_mds) ||
ceph_mdsmap_get_state(mdsc->mdsmap, req->r_resend_mds) > 0)) {
dout("choose_mds using resend_mds mds%d\n",
req->r_resend_mds);
return req->r_resend_mds;
}
if (mode == USE_RANDOM_MDS)
goto random;
inode = NULL;
if (req->r_inode) {
ceph: send LSSNAP request to auth mds of directory inode Snapdir inode has no capability. __choose_mds() should choose mds base on capabilities of snapdir's parent inode. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-26 12:48:08 +08:00
if (ceph_snap(req->r_inode) != CEPH_SNAPDIR) {
inode = req->r_inode;
ihold(inode);
} else {
/* req->r_dentry is non-null for LSSNAP request.
* fall-thru */
WARN_ON_ONCE(!req->r_dentry);
}
}
if (!inode && req->r_dentry) {
ceph: document unlocked d_parent accesses For the most part we don't care about racing with rename when directing MDS requests; either the old or new parent is fine. Document that, and do some minor cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:26 +08:00
/* ignore race with rename; old or new d_parent is okay */
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
struct dentry *parent;
struct inode *dir;
rcu_read_lock();
parent = req->r_dentry->d_parent;
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
dir = req->r_parent ? : d_inode_rcu(parent);
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-17 00:21:27 +08:00
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
if (!dir || dir->i_sb != mdsc->fsc->sb) {
/* not this fs or parent went negative */
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
inode = d_inode(req->r_dentry);
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
if (inode)
ihold(inode);
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-17 00:21:27 +08:00
} else if (ceph_snap(dir) != CEPH_NOSNAP) {
/* direct snapped/virtual snapdir requests
* based on parent dir inode */
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
inode = get_nonsnap_parent(parent);
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-17 00:21:27 +08:00
dout("__choose_mds using nonsnap parent %p\n", inode);
ceph: handle -ESTALE reply Send requests that operate on path to directory's auth MDS if mode == USE_AUTH_MDS. Always retry using the auth MDS if got -ESTALE reply from non-auth MDS. Also clean up the code that handles auth MDS change. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:21:44 +08:00
} else {
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-17 00:21:27 +08:00
/* dentry target */
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
inode = d_inode(req->r_dentry);
ceph: handle -ESTALE reply Send requests that operate on path to directory's auth MDS if mode == USE_AUTH_MDS. Always retry using the auth MDS if got -ESTALE reply from non-auth MDS. Also clean up the code that handles auth MDS change. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:21:44 +08:00
if (!inode || mode == USE_AUTH_MDS) {
/* dir + name */
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
inode = igrab(dir);
ceph: handle -ESTALE reply Send requests that operate on path to directory's auth MDS if mode == USE_AUTH_MDS. Always retry using the auth MDS if got -ESTALE reply from non-auth MDS. Also clean up the code that handles auth MDS change. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:21:44 +08:00
hash = ceph_dentry_hash(dir, req->r_dentry);
is_hash = true;
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
} else {
ihold(inode);
ceph: handle -ESTALE reply Send requests that operate on path to directory's auth MDS if mode == USE_AUTH_MDS. Always retry using the auth MDS if got -ESTALE reply from non-auth MDS. Also clean up the code that handles auth MDS change. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:21:44 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
rcu_read_unlock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: direct requests in snapped namespace based on nonsnap parent When making a request in the virtual snapdir or a snapped portion of the namespace, we should choose the MDS based on the first nonsnap parent (and its caps). If that is not the best place, we will get forward hints to find the right MDS in the cluster. This fixes ESTALE errors when using the .snap directory and namespace with multiple MDSs. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-17 00:21:27 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("__choose_mds %p is_hash=%d (%d) mode %d\n", inode, (int)is_hash,
(int)hash, mode);
if (!inode)
goto random;
ci = ceph_inode(inode);
if (is_hash && S_ISDIR(inode->i_mode)) {
struct ceph_inode_frag frag;
int found;
ceph_choose_frag(ci, hash, &frag, &found);
if (found) {
if (mode == USE_ANY_MDS && frag.ndist > 0) {
u8 r;
/* choose a random replica */
get_random_bytes(&r, 1);
r %= frag.ndist;
mds = frag.dist[r];
dout("choose_mds %p %llx.%llx "
"frag %u mds%d (%d/%d)\n",
inode, ceph_vinop(inode),
ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-22 13:16:46 +08:00
frag.frag, mds,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
(int)r, frag.ndist);
ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-22 13:16:46 +08:00
if (ceph_mdsmap_get_state(mdsc->mdsmap, mds) >=
CEPH_MDS_STATE_ACTIVE)
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
goto out;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/* since this file/dir wasn't known to be
* replicated, then we want to look for the
* authoritative mds. */
mode = USE_AUTH_MDS;
if (frag.mds >= 0) {
/* choose auth mds */
mds = frag.mds;
dout("choose_mds %p %llx.%llx "
"frag %u mds%d (auth)\n",
inode, ceph_vinop(inode), frag.frag, mds);
ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-22 13:16:46 +08:00
if (ceph_mdsmap_get_state(mdsc->mdsmap, mds) >=
CEPH_MDS_STATE_ACTIVE)
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
goto out;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
}
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
cap = NULL;
if (mode == USE_AUTH_MDS)
cap = ci->i_auth_cap;
if (!cap && !RB_EMPTY_ROOT(&ci->i_caps))
cap = rb_entry(rb_first(&ci->i_caps), struct ceph_cap, ci_node);
if (!cap) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
iput(inode);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
goto random;
}
mds = cap->session->s_mds;
dout("choose_mds %p %llx.%llx mds%d (%scap %p)\n",
inode, ceph_vinop(inode), mds,
cap == ci->i_auth_cap ? "auth " : "", cap);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: clean up unsafe d_parent access in __choose_mds __choose_mds exists to pick an MDS to use when issuing a call. Doing that typically involves picking an inode and using the authoritative MDS for it. In most cases, that's pretty straightforward, as we are using an inode to which we hold a reference (usually represented by r_dentry or r_inode in the request). In the case of a snapshotted directory however, we need to fetch the non-snapped parent, which involves walking back up the parents in the tree. The dentries in the snapshot dir are effectively frozen but the overall parent is _not_, and could vanish if a concurrent rename were to occur. Clean this code up and take special care to ensure the validity of the entries we're working with. First, try to use the inode in r_locked_dir if one exists. If not and all we have is r_dentry, then we have to walk back up the tree. Use the rcu_read_lock for this so we can ensure that any d_parent we find won't go away, and take extra care to deal with the possibility that the dentries could go negative. Change get_nonsnap_parent to return an inode, and take a reference to that inode before returning (if any). Change all of the other places where we set "inode" in __choose_mds to also take a reference, and then call iput on that inode before exiting the function. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:56 +08:00
out:
iput(inode);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return mds;
random:
mds = ceph_mdsmap_get_random_mds(mdsc->mdsmap);
dout("choose_mds chose random mds%d\n", mds);
return mds;
}
/*
* session messages
*/
static struct ceph_msg *create_session_msg(u32 op, u64 seq)
{
struct ceph_msg *msg;
struct ceph_mds_session_head *h;
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-10 06:03:46 +08:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h), GFP_NOFS,
false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!msg) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
pr_err("create_session_msg ENOMEM creating msg\n");
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
return NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
h = msg->front.iov_base;
h->op = cpu_to_le32(op);
h->seq = cpu_to_le64(seq);
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
return msg;
}
/*
* session message, specialization for CEPH_SESSION_REQUEST_OPEN
* to include additional client metadata fields.
*/
static struct ceph_msg *create_session_open_msg(struct ceph_mds_client *mdsc, u64 seq)
{
struct ceph_msg *msg;
struct ceph_mds_session_head *h;
int i = -1;
int metadata_bytes = 0;
int metadata_key_count = 0;
struct ceph_options *opt = mdsc->fsc->client->options;
ceph: report mount root in session metadata Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-21 11:09:55 +08:00
struct ceph_mount_options *fsopt = mdsc->fsc->mount_options;
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
void *p;
client: include kernel version in client metadata Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-16 10:54:43 +08:00
const char* metadata[][2] = {
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
{"hostname", utsname()->nodename},
client: include kernel version in client metadata Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-16 10:54:43 +08:00
{"kernel_version", utsname()->release},
ceph: report mount root in session metadata Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-21 11:09:55 +08:00
{"entity_id", opt->name ? : ""},
{"root", fsopt->server_path ? : "/"},
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
{NULL, NULL}
};
/* Calculate serialized length of metadata */
metadata_bytes = 4; /* map length */
for (i = 0; metadata[i][0] != NULL; ++i) {
metadata_bytes += 8 + strlen(metadata[i][0]) +
strlen(metadata[i][1]);
metadata_key_count++;
}
/* Allocate the message */
msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h) + metadata_bytes,
GFP_NOFS, false);
if (!msg) {
pr_err("create_session_msg ENOMEM creating msg\n");
return NULL;
}
h = msg->front.iov_base;
h->op = cpu_to_le32(CEPH_SESSION_REQUEST_OPEN);
h->seq = cpu_to_le64(seq);
/*
* Serialize client metadata into waiting buffer space, using
* the format that userspace expects for map<string, string>
ceph: message versioning fixes There were two places we were assigning version in host byte order instead of network byte order. Also in MSG_CLIENT_SESSION we weren't setting compat_version in the header to reflect continued compatability with older MDSs. Fixes: http://tracker.ceph.com/issues/9945 Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-31 01:15:26 +08:00
*
* ClientSession messages with metadata are v2
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
*/
ceph: message versioning fixes There were two places we were assigning version in host byte order instead of network byte order. Also in MSG_CLIENT_SESSION we weren't setting compat_version in the header to reflect continued compatability with older MDSs. Fixes: http://tracker.ceph.com/issues/9945 Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-31 01:15:26 +08:00
msg->hdr.version = cpu_to_le16(2);
msg->hdr.compat_version = cpu_to_le16(1);
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
/* The write pointer, following the session_head structure */
p = msg->front.iov_base + sizeof(*h);
/* Number of entries in the map */
ceph_encode_32(&p, metadata_key_count);
/* Two length-prefixed strings for each entry in the map */
for (i = 0; metadata[i][0] != NULL; ++i) {
size_t const key_len = strlen(metadata[i][0]);
size_t const val_len = strlen(metadata[i][1]);
ceph_encode_32(&p, key_len);
memcpy(p, metadata[i][0], key_len);
p += key_len;
ceph_encode_32(&p, val_len);
memcpy(p, metadata[i][1], val_len);
p += val_len;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return msg;
}
/*
* send session open request.
*
* called under mdsc->mutex
*/
static int __open_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
int mstate;
int mds = session->s_mds;
/* wait for mds to go active? */
mstate = ceph_mdsmap_get_state(mdsc->mdsmap, mds);
dout("open_session to mds%d (%s)\n", mds,
ceph_mds_state_name(mstate));
session->s_state = CEPH_MDS_SESSION_OPENING;
session->s_renew_requested = jiffies;
/* send connect message */
ceph: send client metadata to MDS Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 02:26:01 +08:00
msg = create_session_open_msg(mdsc, session->s_seq);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!msg)
return -ENOMEM;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_con_send(&session->s_con, msg);
return 0;
}
ceph: introduce helper to connect to mds export targets There are a few cases where we need to open sessions with a given mds's potential export targets. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:25 +08:00
/*
* open sessions for any export targets for the given mds
*
* called under mdsc->mutex
*/
ceph: add open export target session helper Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-24 14:33:01 +08:00
static struct ceph_mds_session *
__open_export_target_session(struct ceph_mds_client *mdsc, int target)
{
struct ceph_mds_session *session;
session = __ceph_lookup_mds_session(mdsc, target);
if (!session) {
session = register_session(mdsc, target);
if (IS_ERR(session))
return session;
}
if (session->s_state == CEPH_MDS_SESSION_NEW ||
session->s_state == CEPH_MDS_SESSION_CLOSING)
__open_session(mdsc, session);
return session;
}
struct ceph_mds_session *
ceph_mdsc_open_export_target_session(struct ceph_mds_client *mdsc, int target)
{
struct ceph_mds_session *session;
dout("open_export_target_session to mds%d\n", target);
mutex_lock(&mdsc->mutex);
session = __open_export_target_session(mdsc, target);
mutex_unlock(&mdsc->mutex);
return session;
}
ceph: introduce helper to connect to mds export targets There are a few cases where we need to open sessions with a given mds's potential export targets. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:25 +08:00
static void __open_export_target_sessions(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_mds_info *mi;
struct ceph_mds_session *ts;
int i, mds = session->s_mds;
ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds mdsmap::m_max_mds is the expected count of active mds. It's not the max rank of active mds. User can decrease mdsmap::m_max_mds, but does not stop mds whose rank >= mdsmap::m_max_mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:04:13 +08:00
if (mds >= mdsc->mdsmap->m_num_mds)
ceph: introduce helper to connect to mds export targets There are a few cases where we need to open sessions with a given mds's potential export targets. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:25 +08:00
return;
ceph: add open export target session helper Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-24 14:33:01 +08:00
ceph: introduce helper to connect to mds export targets There are a few cases where we need to open sessions with a given mds's potential export targets. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:25 +08:00
mi = &mdsc->mdsmap->m_info[mds];
dout("open_export_target_sessions for mds%d (%d targets)\n",
session->s_mds, mi->num_export_targets);
for (i = 0; i < mi->num_export_targets; i++) {
ceph: add open export target session helper Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-24 14:33:01 +08:00
ts = __open_export_target_session(mdsc, mi->export_targets[i]);
if (!IS_ERR(ts))
ceph_put_mds_session(ts);
ceph: introduce helper to connect to mds export targets There are a few cases where we need to open sessions with a given mds's potential export targets. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:25 +08:00
}
}
ceph: connect to export targets on cap export When we get a cap EXPORT message, make sure we are connected to all export targets to ensure we can handle the matching IMPORT. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:45:04 +08:00
void ceph_mdsc_open_export_target_sessions(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
mutex_lock(&mdsc->mutex);
__open_export_target_sessions(mdsc, session);
mutex_unlock(&mdsc->mutex);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* session caps
*/
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
/* caller holds s_cap_lock, we drop it */
static void cleanup_cap_releases(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
__releases(session->s_cap_lock)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
LIST_HEAD(tmp_list);
list_splice_init(&session->s_cap_releases, &tmp_list);
session->s_num_cap_releases = 0;
spin_unlock(&session->s_cap_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
dout("cleanup_cap_releases mds%d\n", session->s_mds);
while (!list_empty(&tmp_list)) {
struct ceph_cap *cap;
/* zero out the in-progress message */
cap = list_first_entry(&tmp_list,
struct ceph_cap, session_caps);
list_del(&cap->session_caps);
ceph_put_cap(mdsc, cap);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
}
ceph: cleanup unsafe requests when reconnecting is denied Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-03-24 20:15:36 +08:00
static void cleanup_session_requests(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_mds_request *req;
struct rb_node *p;
dout("cleanup_session_requests mds%d\n", session->s_mds);
mutex_lock(&mdsc->mutex);
while (!list_empty(&session->s_unsafe)) {
req = list_first_entry(&session->s_unsafe,
struct ceph_mds_request, r_unsafe_item);
ceph: ratelimit warn messages for MDS closes session Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-22 16:38:02 +08:00
pr_warn_ratelimited(" dropping unsafe request %llu\n",
req->r_tid);
ceph: cleanup unsafe requests when reconnecting is denied Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-03-24 20:15:36 +08:00
__unregister_request(mdsc, req);
}
/* zero r_attempts, so kick_requests() will re-send requests */
p = rb_first(&mdsc->request_tree);
while (p) {
req = rb_entry(p, struct ceph_mds_request, r_node);
p = rb_next(p);
if (req->r_session &&
req->r_session->s_mds == session->s_mds)
req->r_attempts = 0;
}
mutex_unlock(&mdsc->mutex);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
ceph: fix cap removal races The iterate_session_caps helper traverses the session caps list and tries to grab an inode reference. However, the __ceph_remove_cap was clearing the inode backpointer _before_ removing itself from the session list, causing a null pointer dereference. Clear cap->ci under protection of s_cap_lock to avoid the race, and to tightly couple the list and backpointer state. Use a local flag to indicate whether we are releasing the cap, as cap->session may be modified by a racing thread in iterate_session_caps. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 11:56:31 +08:00
* Helper to safely iterate over all caps associated with a session, with
* special care taken to handle a racing __ceph_remove_cap().
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*
ceph: fix cap removal races The iterate_session_caps helper traverses the session caps list and tries to grab an inode reference. However, the __ceph_remove_cap was clearing the inode backpointer _before_ removing itself from the session list, causing a null pointer dereference. Clear cap->ci under protection of s_cap_lock to avoid the race, and to tightly couple the list and backpointer state. Use a local flag to indicate whether we are releasing the cap, as cap->session may be modified by a racing thread in iterate_session_caps. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-12 11:56:31 +08:00
* Caller must hold session s_mutex.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*/
static int iterate_session_caps(struct ceph_mds_session *session,
int (*cb)(struct inode *, struct ceph_cap *,
void *), void *arg)
{
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
struct list_head *p;
struct ceph_cap *cap;
struct inode *inode, *last_inode = NULL;
struct ceph_cap *old_cap = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
int ret;
dout("iterate_session_caps %p mds%d\n", session, session->s_mds);
spin_lock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
p = session->s_caps.next;
while (p != &session->s_caps) {
cap = list_entry(p, struct ceph_cap, session_caps);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
inode = igrab(&cap->ci->vfs_inode);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
if (!inode) {
p = p->next;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
continue;
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
}
session->s_cap_iterator = cap;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
spin_unlock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
if (last_inode) {
iput(last_inode);
last_inode = NULL;
}
if (old_cap) {
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_put_cap(session->s_mdsc, old_cap);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
old_cap = NULL;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ret = cb(inode, cap, arg);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
last_inode = inode;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
spin_lock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
p = p->next;
if (cap->ci == NULL) {
dout("iterate_session_caps finishing cap %p removal\n",
cap);
BUG_ON(cap->session != session);
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
cap->session = NULL;
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
list_del_init(&cap->session_caps);
session->s_nr_caps--;
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
if (cap->queue_release) {
list_add_tail(&cap->session_caps,
&session->s_cap_releases);
session->s_num_cap_releases++;
} else {
old_cap = cap; /* put_cap it w/o locks held */
}
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
}
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 12:40:34 +08:00
if (ret < 0)
goto out;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 12:40:34 +08:00
ret = 0;
out:
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
session->s_cap_iterator = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
spin_unlock(&session->s_cap_lock);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
ceph, rbd: delete unnecessary checks before two function calls The functions ceph_put_snap_context() and iput() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [idryomov@redhat.com: squashed rbd.c hunk, changelog] Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-11-02 22:20:59 +08:00
iput(last_inode);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
if (old_cap)
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_put_cap(session->s_mdsc, old_cap);
ceph: fix iterate_caps removal race We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 03:39:45 +08:00
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 12:40:34 +08:00
return ret;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
void *arg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
struct ceph_fs_client *fsc = (struct ceph_fs_client *)arg;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
LIST_HEAD(to_remove);
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
bool drop = false;
bool invalidate = false;
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("removing cap %p, ci is %p, inode is %p\n",
cap, ci, &ci->vfs_inode);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: queue cap release in __ceph_remove_cap() call __queue_cap_release() in __ceph_remove_cap(), this avoids acquiring s_cap_lock twice. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:15:58 +08:00
__ceph_remove_cap(cap, false);
ceph: don't mark dirty caps when there is no auth cap No i_auth_cap means reconnecting to MDS was denied. So don't add new dirty caps. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-03-24 11:36:08 +08:00
if (!ci->i_auth_cap) {
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
struct ceph_cap_flush *cf;
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
ceph: renew caps for read/write if mds session got killed. When mds session gets killed, read/write operation may hang. Client waits for Frw caps, but mds does not know what caps client wants. To recover this, client sends an open request to mds. The request will tell mds what caps client wants. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-08 15:27:16 +08:00
ci->i_ceph_flags |= CEPH_I_CAP_DROPPED;
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
if (ci->i_wrbuffer_ref > 0 &&
ceph: cleanup ACCESS_ONCE -> READ_ONCE This removes the uses of ACCESS_ONCE in favor of READ_ONCE Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-26 17:26:34 +08:00
READ_ONCE(fsc->mount_state) == CEPH_MOUNT_SHUTDOWN)
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
invalidate = true;
ceph: use list instead of rbtree to track cap flushes We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-06 11:12:56 +08:00
while (!list_empty(&ci->i_cap_flush_list)) {
cf = list_first_entry(&ci->i_cap_flush_list,
struct ceph_cap_flush, i_list);
ceph: use list_move instead of list_del/list_add Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-08-13 17:10:28 +08:00
list_move(&cf->i_list, &to_remove);
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
}
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
spin_lock(&mdsc->cap_dirty_lock);
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
ceph: use list instead of rbtree to track cap flushes We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-06 11:12:56 +08:00
list_for_each_entry(cf, &to_remove, i_list)
list_del(&cf->g_list);
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
if (!list_empty(&ci->i_dirty_item)) {
ceph: ratelimit warn messages for MDS closes session Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-22 16:38:02 +08:00
pr_warn_ratelimited(
" dropping dirty %s state for %p %lld\n",
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
ceph_cap_string(ci->i_dirty_caps),
inode, ceph_ino(inode));
ci->i_dirty_caps = 0;
list_del_init(&ci->i_dirty_item);
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
drop = true;
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
}
if (!list_empty(&ci->i_flushing_item)) {
ceph: ratelimit warn messages for MDS closes session Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-22 16:38:02 +08:00
pr_warn_ratelimited(
" dropping dirty+flushing %s state for %p %lld\n",
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
ceph_cap_string(ci->i_flushing_caps),
inode, ceph_ino(inode));
ci->i_flushing_caps = 0;
list_del_init(&ci->i_flushing_item);
mdsc->num_cap_flushing--;
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
drop = true;
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
}
spin_unlock(&mdsc->cap_dirty_lock);
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
if (!ci->i_dirty_caps && ci->i_prealloc_cap_flush) {
ceph: use list instead of rbtree to track cap flushes We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-06 11:12:56 +08:00
list_add(&ci->i_prealloc_cap_flush->i_list, &to_remove);
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
ci->i_prealloc_cap_flush = NULL;
}
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
while (!list_empty(&to_remove)) {
struct ceph_cap_flush *cf;
cf = list_first_entry(&to_remove,
ceph: use list instead of rbtree to track cap flushes We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-06 11:12:56 +08:00
struct ceph_cap_flush, i_list);
list_del(&cf->i_list);
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
ceph_free_cap_flush(cf);
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
}
ceph: renew caps for read/write if mds session got killed. When mds session gets killed, read/write operation may hang. Client waits for Frw caps, but mds does not know what caps client wants. To recover this, client sends an open request to mds. The request will tell mds what caps client wants. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-08 15:27:16 +08:00
wake_up_all(&ci->i_cap_wq);
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
if (invalidate)
ceph_queue_invalidate(inode);
ceph: renew caps for read/write if mds session got killed. When mds session gets killed, read/write operation may hang. Client waits for Frw caps, but mds does not know what caps client wants. To recover this, client sends an open request to mds. The request will tell mds what caps client wants. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-08 15:27:16 +08:00
if (drop)
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
iput(inode);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return 0;
}
/*
* caller must hold session s_mutex
*/
static void remove_session_caps(struct ceph_mds_session *session)
{
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
struct ceph_fs_client *fsc = session->s_mdsc->fsc;
struct super_block *sb = fsc->sb;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("remove_session_caps on %p\n", session);
ceph: don't call truncate_pagecache in ceph_writepages_start truncate_pagecache() may decrease inode's reference. This can cause deadlock if inode's last reference is dropped and iput_final() wants to evict the inode. (evict() calls inode_wait_for_writeback(), which waits for ceph_writepages_start() to return). The fix is use work thead to truncate dirty pages. Also add 'forced umount' check to ceph_update_writeable_page(), which prevents new pages getting dirty. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-15 13:56:12 +08:00
iterate_session_caps(session, remove_session_caps_cb, fsc);
ceph: fix freeing inode vs removing session caps race remove_session_caps() uses iterate_session_caps() to remove caps, but iterate_session_caps() skips inodes that are being deleted. So session->s_nr_caps can be non-zero after iterate_session_caps() return. We can fix the issue by waiting until deletions are complete. __wait_on_freeing_inode() is designed for the job, but it is not exported, so we use lookup inode function to access it. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-07-24 12:22:11 +08:00
ceph: optimize cap flush waiting Add a 'wake' flag to ceph_cap_flush struct, which indicates if there is someone waiting for it to finish. When getting flush ack message, we check the 'wake' flag in corresponding ceph_cap_flush struct to decide if we should wake up waiters. One corner case is that the acked cap flush has 'wake' flags is set, but it is not the first one on the flushing list. We do not wake up waiters in this case, set 'wake' flags of preceding ceph_cap_flush struct instead Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-07 15:22:38 +08:00
wake_up_all(&fsc->mdsc->cap_flushing_wq);
ceph: fix freeing inode vs removing session caps race remove_session_caps() uses iterate_session_caps() to remove caps, but iterate_session_caps() skips inodes that are being deleted. So session->s_nr_caps can be non-zero after iterate_session_caps() return. We can fix the issue by waiting until deletions are complete. __wait_on_freeing_inode() is designed for the job, but it is not exported, so we use lookup inode function to access it. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-07-24 12:22:11 +08:00
spin_lock(&session->s_cap_lock);
if (session->s_nr_caps > 0) {
struct inode *inode;
struct ceph_cap *cap, *prev = NULL;
struct ceph_vino vino;
/*
* iterate_session_caps() skips inodes that are being
* deleted, we need to wait until deletions are complete.
* __wait_on_freeing_inode() is designed for the job,
* but it is not exported, so use lookup inode function
* to access it.
*/
while (!list_empty(&session->s_caps)) {
cap = list_entry(session->s_caps.next,
struct ceph_cap, session_caps);
if (cap == prev)
break;
prev = cap;
vino = cap->ci->i_vino;
spin_unlock(&session->s_cap_lock);
ceph: remove ceph_lookup_inode() commit 6f60f889 (ceph: fix freeing inode vs removing session caps race) introduced ceph_lookup_inode(). But there is already a ceph_find_inode() which provides similar function. So remove ceph_lookup_inode(), use ceph_find_inode() instead. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <alex.elder@linary.org> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-02 15:19:53 +08:00
inode = ceph_find_inode(sb, vino);
ceph: fix freeing inode vs removing session caps race remove_session_caps() uses iterate_session_caps() to remove caps, but iterate_session_caps() skips inodes that are being deleted. So session->s_nr_caps can be non-zero after iterate_session_caps() return. We can fix the issue by waiting until deletions are complete. __wait_on_freeing_inode() is designed for the job, but it is not exported, so we use lookup inode function to access it. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-07-24 12:22:11 +08:00
iput(inode);
spin_lock(&session->s_cap_lock);
}
}
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
// drop cap expires and unlock s_cap_lock
cleanup_cap_releases(session->s_mdsc, session);
ceph: fix freeing inode vs removing session caps race remove_session_caps() uses iterate_session_caps() to remove caps, but iterate_session_caps() skips inodes that are being deleted. So session->s_nr_caps can be non-zero after iterate_session_caps() return. We can fix the issue by waiting until deletions are complete. __wait_on_freeing_inode() is designed for the job, but it is not exported, so we use lookup inode function to access it. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-07-24 12:22:11 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
BUG_ON(session->s_nr_caps > 0);
ceph: throw out dirty caps metadata, data on session teardown The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:12:25 +08:00
BUG_ON(!list_empty(&session->s_cap_flushing));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* wake up any threads waiting on this session's caps. if the cap is
* old (didn't get renewed on the client reconnect), remove it now.
*
* caller must hold s_mutex.
*/
static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap,
void *arg)
{
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
if (arg) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
ci->i_wanted_max_size = 0;
ci->i_requested_max_size = 0;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
}
ceph: fix wake_up_session_cb() We should reset i_requested_max_size before waking the waiters. (zero i_requested_max_size make waiter re-request the max size) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-19 19:15:19 +08:00
wake_up_all(&ci->i_cap_wq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return 0;
}
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
static void wake_up_session_caps(struct ceph_mds_session *session,
int reconnect)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
dout("wake_up_session_caps %p mds%d\n", session, session->s_mds);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
iterate_session_caps(session, wake_up_session_cb,
(void *)(unsigned long)reconnect);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* Send periodic message to MDS renewing all currently held caps. The
* ack will reset the expiration for all caps from this session.
*
* caller holds s_mutex
*/
static int send_renew_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
int state;
if (time_after_eq(jiffies, session->s_cap_ttl) &&
time_after_eq(session->s_cap_ttl, session->s_renew_requested))
pr_info("mds%d caps stale\n", session->s_mds);
ceph: prevent dup stale messages to console for restarting mds Prevent duplicate 'mds0 caps stale' message from spamming the console every few seconds while the MDS restarts. Set s_renew_requested earlier, so that we only print the message once, even if we don't send an actual request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 04:43:09 +08:00
session->s_renew_requested = jiffies;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* do not try to renew caps until a recovering mds has reconnected
* with its clients. */
state = ceph_mdsmap_get_state(mdsc->mdsmap, session->s_mds);
if (state < CEPH_MDS_STATE_RECONNECT) {
dout("send_renew_caps ignoring mds%d (%s)\n",
session->s_mds, ceph_mds_state_name(state));
return 0;
}
dout("send_renew_caps to mds%d (%s)\n", session->s_mds,
ceph_mds_state_name(state));
msg = create_session_msg(CEPH_SESSION_REQUEST_RENEWCAPS,
++session->s_renew_seq);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!msg)
return -ENOMEM;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_con_send(&session->s_con, msg);
return 0;
}
ceph: handle session flush message Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:48:37 +08:00
static int send_flushmsg_ack(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session, u64 seq)
{
struct ceph_msg *msg;
dout("send_flushmsg_ack to mds%d (%s)s seq %lld\n",
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
session->s_mds, ceph_session_state_name(session->s_state), seq);
ceph: handle session flush message Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:48:37 +08:00
msg = create_session_msg(CEPH_SESSION_FLUSHMSG_ACK, seq);
if (!msg)
return -ENOMEM;
ceph_con_send(&session->s_con, msg);
return 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* Note new cap ttl, and any transition from stale -> not stale (fresh?).
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
*
* Called under session->s_mutex
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*/
static void renewed_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session, int is_renew)
{
int was_stale;
int wake = 0;
spin_lock(&session->s_cap_lock);
ceph: don't reset s_cap_ttl to zero Avoid the need to check for a special zero s_cap_ttl value by just using (jiffies - 1) as the value assigned to indicate "sometime in the past." Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:11 +08:00
was_stale = is_renew && time_after_eq(jiffies, session->s_cap_ttl);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
session->s_cap_ttl = session->s_renew_requested +
mdsc->mdsmap->m_session_timeout*HZ;
if (was_stale) {
if (time_before(jiffies, session->s_cap_ttl)) {
pr_info("mds%d caps renewed\n", session->s_mds);
wake = 1;
} else {
pr_info("mds%d caps still stale\n", session->s_mds);
}
}
dout("renewed_caps mds%d ttl now %lu, was %s, now %s\n",
session->s_mds, session->s_cap_ttl, was_stale ? "stale" : "fresh",
time_before(jiffies, session->s_cap_ttl) ? "stale" : "fresh");
spin_unlock(&session->s_cap_lock);
if (wake)
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
wake_up_session_caps(session, 0);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* send a session close request
*/
static int request_close_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_msg *msg;
dout("request_close_session mds%d state %s seq %lld\n",
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
session->s_mds, ceph_session_state_name(session->s_state),
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
session->s_seq);
msg = create_session_msg(CEPH_SESSION_REQUEST_CLOSE, session->s_seq);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!msg)
return -ENOMEM;
ceph_con_send(&session->s_con, msg);
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
return 1;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* Called with s_mutex held.
*/
static int __close_session(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
if (session->s_state >= CEPH_MDS_SESSION_CLOSING)
return 0;
session->s_state = CEPH_MDS_SESSION_CLOSING;
return request_close_session(mdsc, session);
}
/*
* Trim old(er) caps.
*
* Because we can't cache an inode without one or more caps, we do
* this indirectly: if a cap is unused, we prune its aliases, at which
* point the inode will hopefully get dropped to.
*
* Yes, this is a bit sloppy. Our only real goal here is to respond to
* memory pressure from the MDS, though, so it needn't be perfect.
*/
static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg)
{
struct ceph_mds_session *session = arg;
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: fix trim caps - don't trim auth cap if there are flusing caps - don't trim auth cap if any 'write' cap is wanted - allow trimming non-auth cap even if the inode is dirty Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 13:56:24 +08:00
int used, wanted, oissued, mine;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (session->s_trim_caps <= 0)
return -1;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mine = cap->issued | cap->implemented;
used = __ceph_caps_used(ci);
ceph: fix trim caps - don't trim auth cap if there are flusing caps - don't trim auth cap if any 'write' cap is wanted - allow trimming non-auth cap even if the inode is dirty Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 13:56:24 +08:00
wanted = __ceph_caps_file_wanted(ci);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
oissued = __ceph_caps_issued_other(ci, cap);
ceph: fix trim caps - don't trim auth cap if there are flusing caps - don't trim auth cap if any 'write' cap is wanted - allow trimming non-auth cap even if the inode is dirty Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 13:56:24 +08:00
dout("trim_caps_cb %p cap %p mine %s oissued %s used %s wanted %s\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
inode, cap, ceph_cap_string(mine), ceph_cap_string(oissued),
ceph: fix trim caps - don't trim auth cap if there are flusing caps - don't trim auth cap if any 'write' cap is wanted - allow trimming non-auth cap even if the inode is dirty Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 13:56:24 +08:00
ceph_cap_string(used), ceph_cap_string(wanted));
if (cap == ci->i_auth_cap) {
ceph: don't trim auth cap when there are cap snaps Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-07 10:59:47 +08:00
if (ci->i_dirty_caps || ci->i_flushing_caps ||
!list_empty(&ci->i_cap_snaps))
ceph: fix trim caps - don't trim auth cap if there are flusing caps - don't trim auth cap if any 'write' cap is wanted - allow trimming non-auth cap even if the inode is dirty Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 13:56:24 +08:00
goto out;
if ((used | wanted) & CEPH_CAP_ANY_WR)
goto out;
}
ceph: don't invalidate page cache when inode is no longer used ceph_check_caps() invalidate page cache when inode is not used by any open file. This behaviour is not friendly for workload that repeatly read files. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-26 16:08:43 +08:00
/* The inode has cached pages, but it's no longer used.
* we can safely drop it */
if (wanted == 0 && used == CEPH_CAP_FILE_CACHE &&
!(oissued & CEPH_CAP_FILE_CACHE)) {
used = 0;
oissued = 0;
}
ceph: fix trim caps - don't trim auth cap if there are flusing caps - don't trim auth cap if any 'write' cap is wanted - allow trimming non-auth cap even if the inode is dirty Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 13:56:24 +08:00
if ((used | wanted) & ~oissued & mine)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
goto out; /* we need these caps */
session->s_trim_caps--;
if (oissued) {
/* we aren't the only cap.. just remove us */
ceph: queue cap release in __ceph_remove_cap() call __queue_cap_release() in __ceph_remove_cap(), this avoids acquiring s_cap_lock twice. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:15:58 +08:00
__ceph_remove_cap(cap, true);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
} else {
ceph: don't invalidate page cache when inode is no longer used ceph_check_caps() invalidate page cache when inode is not used by any open file. This behaviour is not friendly for workload that repeatly read files. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-26 16:08:43 +08:00
/* try dropping referring dentries */
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
d_prune_aliases(inode);
dout("trim_caps_cb %p cap %p pruned, count now %d\n",
inode, cap, atomic_read(&inode->i_count));
return 0;
}
out:
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return 0;
}
/*
* Trim session cap count down to some max number.
*/
static int trim_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
int max_caps)
{
int trim_caps = session->s_nr_caps - max_caps;
dout("trim_caps mds%d start: %d / %d, trim %d\n",
session->s_mds, session->s_nr_caps, max_caps, trim_caps);
if (trim_caps > 0) {
session->s_trim_caps = trim_caps;
iterate_session_caps(session, trim_caps_cb, session);
dout("trim_caps mds%d done: %d / %d, trimmed %d\n",
session->s_mds, session->s_nr_caps, max_caps,
trim_caps - session->s_trim_caps);
ceph: do not touch_caps while iterating over caps list Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-22 12:40:34 +08:00
session->s_trim_caps = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: flush cap release queue when trimming session caps Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-01 20:34:56 +08:00
ceph_send_cap_releases(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return 0;
}
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
static int check_caps_flush(struct ceph_mds_client *mdsc,
u64 want_flush_tid)
{
int ret = 1;
spin_lock(&mdsc->cap_dirty_lock);
ceph: use list instead of rbtree to track cap flushes We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-06 11:12:56 +08:00
if (!list_empty(&mdsc->cap_flush_list)) {
struct ceph_cap_flush *cf =
list_first_entry(&mdsc->cap_flush_list,
struct ceph_cap_flush, g_list);
if (cf->tid <= want_flush_tid) {
dout("check_caps_flush still flushing tid "
"%llu <= %llu\n", cf->tid, want_flush_tid);
ret = 0;
}
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
}
spin_unlock(&mdsc->cap_dirty_lock);
return ret;
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync) check_cap_flush() calls mutex_lock(), which may block. So we can't use it as condition check function for wait_event(); Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-08 21:30:12 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* flush all dirty inode data to disk.
*
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
* returns true if we've flushed through want_flush_tid
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*/
ceph: make sure syncfs flushes all cap snaps Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-05 21:22:13 +08:00
static void wait_caps_flush(struct ceph_mds_client *mdsc,
ceph: unify cap flush and snapcap flush This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 18:06:41 +08:00
u64 want_flush_tid)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: unify cap flush and snapcap flush This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 18:06:41 +08:00
dout("check_caps_flush want %llu\n", want_flush_tid);
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
wait_event(mdsc->cap_flushing_wq,
check_caps_flush(mdsc, want_flush_tid));
dout("check_caps_flush ok, flushed thru %llu\n", want_flush_tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* called under s_mutex
*/
ceph: release cap on import if we don't have the inode If we get an IMPORT that give us a cap, but we don't have the inode, queue a release (and try to send it immediately) so that the MDS doesn't get stuck waiting for us. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 07:47:10 +08:00
void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
struct ceph_msg *msg = NULL;
struct ceph_mds_cap_release *head;
struct ceph_mds_cap_item *item;
ceph: handle epoch barriers in cap messages Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-13 23:07:04 +08:00
struct ceph_osd_client *osdc = &mdsc->fsc->client->osdc;
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
struct ceph_cap *cap;
LIST_HEAD(tmp_list);
int num_cap_releases;
ceph: handle epoch barriers in cap messages Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-13 23:07:04 +08:00
__le32 barrier, *cap_barrier;
down_read(&osdc->lock);
barrier = cpu_to_le32(osdc->epoch_barrier);
up_read(&osdc->lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: clean up cap release loop vs spinlock Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-06 06:51:35 +08:00
spin_lock(&session->s_cap_lock);
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
again:
list_splice_init(&session->s_cap_releases, &tmp_list);
num_cap_releases = session->s_num_cap_releases;
session->s_num_cap_releases = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
spin_unlock(&session->s_cap_lock);
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
while (!list_empty(&tmp_list)) {
if (!msg) {
msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPRELEASE,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
PAGE_SIZE, GFP_NOFS, false);
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
if (!msg)
goto out_err;
head = msg->front.iov_base;
head->num = cpu_to_le32(0);
msg->front.iov_len = sizeof(*head);
ceph: handle epoch barriers in cap messages Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-13 23:07:04 +08:00
msg->hdr.version = cpu_to_le16(2);
msg->hdr.compat_version = cpu_to_le16(1);
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
}
ceph: handle epoch barriers in cap messages Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-13 23:07:04 +08:00
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
cap = list_first_entry(&tmp_list, struct ceph_cap,
session_caps);
list_del(&cap->session_caps);
num_cap_releases--;
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
ceph: fix null pointer dereference in discard_cap_releases() send_mds_reconnect() may call discard_cap_releases() after all release messages have been dropped by cleanup_cap_releases() Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-24 09:56:43 +08:00
head = msg->front.iov_base;
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
le32_add_cpu(&head->num, 1);
item = msg->front.iov_base + msg->front.iov_len;
item->ino = cpu_to_le64(cap->cap_ino);
item->cap_id = cpu_to_le64(cap->cap_id);
item->migrate_seq = cpu_to_le32(cap->mseq);
item->seq = cpu_to_le32(cap->issue_seq);
msg->front.iov_len += sizeof(*item);
ceph_put_cap(mdsc, cap);
if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
ceph: handle epoch barriers in cap messages Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-13 23:07:04 +08:00
// Append cap_barrier field
cap_barrier = msg->front.iov_base + msg->front.iov_len;
*cap_barrier = barrier;
msg->front.iov_len += sizeof(*cap_barrier);
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
dout("send_cap_releases mds%d %p\n", session->s_mds, msg);
ceph_con_send(&session->s_con, msg);
msg = NULL;
}
ceph: fix null pointer dereference in discard_cap_releases() send_mds_reconnect() may call discard_cap_releases() after all release messages have been dropped by cleanup_cap_releases() Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-24 09:56:43 +08:00
}
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
BUG_ON(num_cap_releases != 0);
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
spin_lock(&session->s_cap_lock);
if (!list_empty(&session->s_cap_releases))
goto again;
spin_unlock(&session->s_cap_lock);
if (msg) {
ceph: handle epoch barriers in cap messages Have the client store and update the osdc epoch_barrier when a cap message comes in with one. When sending cap messages, send the epoch barrier as well. This allows clients to inform servers that their released caps may not be used until a particular OSD map epoch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-13 23:07:04 +08:00
// Append cap_barrier field
cap_barrier = msg->front.iov_base + msg->front.iov_len;
*cap_barrier = barrier;
msg->front.iov_len += sizeof(*cap_barrier);
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
dout("send_cap_releases mds%d %p\n", session->s_mds, msg);
ceph_con_send(&session->s_con, msg);
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
}
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
return;
out_err:
pr_err("send_cap_releases mds%d, failed to allocate message\n",
session->s_mds);
spin_lock(&session->s_cap_lock);
list_splice(&tmp_list, &session->s_cap_releases);
session->s_num_cap_releases += num_cap_releases;
spin_unlock(&session->s_cap_lock);
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* requests
*/
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
int ceph_alloc_readdir_reply_buffer(struct ceph_mds_request *req,
struct inode *dir)
{
struct ceph_inode_info *ci = ceph_inode(dir);
struct ceph_mds_reply_info_parsed *rinfo = &req->r_reply_info;
struct ceph_mount_options *opt = req->r_mdsc->fsc->mount_options;
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
size_t size = sizeof(struct ceph_mds_reply_dir_entry);
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
int order, num_entries;
spin_lock(&ci->i_ceph_lock);
num_entries = ci->i_files + ci->i_subdirs;
spin_unlock(&ci->i_ceph_lock);
num_entries = max(num_entries, 1);
num_entries = min(num_entries, opt->max_readdir);
order = get_order(size * num_entries);
while (order >= 0) {
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
rinfo->dir_entries = (void*)__get_free_pages(GFP_KERNEL |
__GFP_NOWARN,
order);
if (rinfo->dir_entries)
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
break;
order--;
}
ceph: define struct for dir entry in readdir reply This avoids defining multiple arrays for entries in readdir reply Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-28 09:37:39 +08:00
if (!rinfo->dir_entries)
ceph: preallocate buffer for readdir reply Preallocate buffer for readdir reply. Limit number of entries in readdir reply according to the buffer size. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-03-29 13:41:15 +08:00
return -ENOMEM;
num_entries = (PAGE_SIZE << order) / size;
num_entries = min(num_entries, opt->max_readdir);
rinfo->dir_buf_size = PAGE_SIZE << order;
req->r_num_caps = num_entries + 1;
req->r_args.readdir.max_entries = cpu_to_le32(num_entries);
req->r_args.readdir.max_bytes = cpu_to_le32(opt->max_readdir_bytes);
return 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* Create an mds request.
*/
struct ceph_mds_request *
ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode)
{
struct ceph_mds_request *req = kzalloc(sizeof(*req), GFP_NOFS);
if (!req)
return ERR_PTR(-ENOMEM);
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 03:01:13 +08:00
mutex_init(&req->r_fill_mutex);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
req->r_mdsc = mdsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
req->r_started = jiffies;
req->r_resend_mds = -1;
INIT_LIST_HEAD(&req->r_unsafe_dir_item);
ceph: make fsync() wait unsafe requests that created/modified inode If we get a unsafe reply for request that created/modified inode, add the unsafe request to a list in the newly created/modified inode. So we can make fsync() wait these unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 18:36:06 +08:00
INIT_LIST_HEAD(&req->r_unsafe_target_item);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
req->r_fmode = -1;
ceph: use kref for struct ceph_mds_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 04:31:09 +08:00
kref_init(&req->r_kref);
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
RB_CLEAR_NODE(&req->r_node);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_LIST_HEAD(&req->r_wait);
init_completion(&req->r_completion);
init_completion(&req->r_safe_completion);
INIT_LIST_HEAD(&req->r_unsafe_item);
ceph: use current_kernel_time() to get request time stamp ceph uses ktime_get_real_ts() to get request time stamp. In most other cases, current_kernel_time() is used to get time stamp for filesystem operations (called by current_time()). There is granularity difference between ktime_get_real_ts() and current_kernel_time(). The later one can be up to one jiffy behind the former one. This can causes inode's ctime to go back. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-01 16:44:53 +08:00
req->r_stamp = timespec_trunc(current_kernel_time(), mdsc->fsc->sb->s_time_gran);
ceph: include time stamp in every MDS request We recently modified the client/MDS protocol to include a timestamp in the client request. This allows ctime updates to follow the client's clock in most cases, which avoids subtle problems when clocks are out of sync and timestamps are updated sometimes by the MDS clock (for most requests) and sometimes by the client clock (for cap writeback). Signed-off-by: Sage Weil <sage@inktank.com>
2014-05-22 08:41:08 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
req->r_op = op;
req->r_direct_mode = mode;
return req;
}
/*
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
* return oldest (lowest) request, tid in request tree, 0 if none.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*
* called under mdsc->mutex.
*/
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
static struct ceph_mds_request *__get_oldest_req(struct ceph_mds_client *mdsc)
{
if (RB_EMPTY_ROOT(&mdsc->request_tree))
return NULL;
return rb_entry(rb_first(&mdsc->request_tree),
struct ceph_mds_request, r_node);
}
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
static inline u64 __get_oldest_tid(struct ceph_mds_client *mdsc)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
return mdsc->oldest_tid;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* Build a dentry's path. Allocate on heap; caller must kfree. Based
* on build_path_from_dentry in fs/cifs/dir.c.
*
* If @stop_on_nosnap, generate path relative to the first non-snapped
* inode.
*
* Encode hidden .snap dirs as a double /, i.e.
* foo/.snap/bar -> foo//bar
*/
char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
int stop_on_nosnap)
{
struct dentry *temp;
char *path;
int len, pos;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
unsigned seq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (dentry == NULL)
return ERR_PTR(-EINVAL);
retry:
len = 0;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
seq = read_seqbegin(&rename_lock);
rcu_read_lock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
for (temp = dentry; !IS_ROOT(temp);) {
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
struct inode *inode = d_inode(temp);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (inode && ceph_snap(inode) == CEPH_SNAPDIR)
len++; /* slash only */
else if (stop_on_nosnap && inode &&
ceph_snap(inode) == CEPH_NOSNAP)
break;
else
len += 1 + temp->d_name.len;
temp = temp->d_parent;
}
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
rcu_read_unlock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (len)
len--; /* no leading '/' */
path = kmalloc(len+1, GFP_NOFS);
if (path == NULL)
return ERR_PTR(-ENOMEM);
pos = len;
path[pos] = 0; /* trailing null */
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
rcu_read_lock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
for (temp = dentry; !IS_ROOT(temp) && pos != 0; ) {
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
struct inode *inode;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
spin_lock(&temp->d_lock);
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
inode = d_inode(temp);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (inode && ceph_snap(inode) == CEPH_SNAPDIR) {
ceph: reduce build_path debug output Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 01:14:30 +08:00
dout("build_path path+%d: %p SNAPDIR\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
pos, temp);
} else if (stop_on_nosnap && inode &&
ceph_snap(inode) == CEPH_NOSNAP) {
ceph: add missing spin_unlock at ceph_mdsc_build_path() one of the paths was missing spin_unlock Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-12-14 01:57:44 +08:00
spin_unlock(&temp->d_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
} else {
pos -= temp->d_name.len;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
if (pos < 0) {
spin_unlock(&temp->d_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
strncpy(path + pos, temp->d_name.name,
temp->d_name.len);
}
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
spin_unlock(&temp->d_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (pos)
path[--pos] = '/';
temp = temp->d_parent;
}
ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 11:43:58 +08:00
rcu_read_unlock();
if (pos != 0 || read_seqretry(&rename_lock, seq)) {
ceph: reduce build_path debug output Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 01:14:30 +08:00
pr_err("build_path did not end path lookup where "
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
"expected, namelen is %d, pos is %d\n", len, pos);
/* presumably this is only possible if racing with a
rename of one of the parent directories (we can not
lock the dentries above us to prevent this, but
retrying should be harmless) */
kfree(path);
goto retry;
}
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
*base = ceph_ino(d_inode(temp));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*plen = len;
ceph: reduce build_path debug output Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 01:14:30 +08:00
dout("build_path on %p %d built %llx '%.*s'\n",
helper for reading ->d_count Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-05 22:59:33 +08:00
dentry, d_count(dentry), *base, len, path);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return path;
}
ceph: pass parent dir ino info to build_dentry_path In the event that we have a parent inode reference in the request, we can use that instead of mucking about in the dcache. Pass any parent inode info we have down to build_dentry_path so it can make use of it. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:58 +08:00
static int build_dentry_path(struct dentry *dentry, struct inode *dir,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
const char **ppath, int *ppathlen, u64 *pino,
int *pfreepath)
{
char *path;
ceph: clean up unsafe d_parent accesses in build_dentry_path While we hold a reference to the dentry when build_dentry_path is called, we could end up racing with a rename that changes d_parent. Handle that situation correctly, by using the rcu_read_lock to ensure that the parent dentry and inode stick around long enough to safely check ceph_snap and ceph_ino. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:57 +08:00
rcu_read_lock();
ceph: pass parent dir ino info to build_dentry_path In the event that we have a parent inode reference in the request, we can use that instead of mucking about in the dcache. Pass any parent inode info we have down to build_dentry_path so it can make use of it. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:58 +08:00
if (!dir)
dir = d_inode_rcu(dentry->d_parent);
ceph: clean up unsafe d_parent accesses in build_dentry_path While we hold a reference to the dentry when build_dentry_path is called, we could end up racing with a rename that changes d_parent. Handle that situation correctly, by using the rcu_read_lock to ensure that the parent dentry and inode stick around long enough to safely check ceph_snap and ceph_ino. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:57 +08:00
if (dir && ceph_snap(dir) == CEPH_NOSNAP) {
*pino = ceph_ino(dir);
rcu_read_unlock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*ppath = dentry->d_name.name;
*ppathlen = dentry->d_name.len;
return 0;
}
ceph: clean up unsafe d_parent accesses in build_dentry_path While we hold a reference to the dentry when build_dentry_path is called, we could end up racing with a rename that changes d_parent. Handle that situation correctly, by using the rcu_read_lock to ensure that the parent dentry and inode stick around long enough to safely check ceph_snap and ceph_ino. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:57 +08:00
rcu_read_unlock();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
if (IS_ERR(path))
return PTR_ERR(path);
*ppath = path;
*pfreepath = 1;
return 0;
}
static int build_inode_path(struct inode *inode,
const char **ppath, int *ppathlen, u64 *pino,
int *pfreepath)
{
struct dentry *dentry;
char *path;
if (ceph_snap(inode) == CEPH_NOSNAP) {
*pino = ceph_ino(inode);
*ppathlen = 0;
return 0;
}
dentry = d_find_alias(inode);
path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
dput(dentry);
if (IS_ERR(path))
return PTR_ERR(path);
*ppath = path;
*pfreepath = 1;
return 0;
}
/*
* request arguments may be specified via an inode *, a dentry *, or
* an explicit ino+path.
*/
static int set_request_path_attr(struct inode *rinode, struct dentry *rdentry,
ceph: pass parent dir ino info to build_dentry_path In the event that we have a parent inode reference in the request, we can use that instead of mucking about in the dcache. Pass any parent inode info we have down to build_dentry_path so it can make use of it. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:58 +08:00
struct inode *rdiri, const char *rpath,
u64 rino, const char **ppath, int *pathlen,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
u64 *ino, int *freepath)
{
int r = 0;
if (rinode) {
r = build_inode_path(rinode, ppath, pathlen, ino, freepath);
dout(" inode %p %llx.%llx\n", rinode, ceph_ino(rinode),
ceph_snap(rinode));
} else if (rdentry) {
ceph: pass parent dir ino info to build_dentry_path In the event that we have a parent inode reference in the request, we can use that instead of mucking about in the dcache. Pass any parent inode info we have down to build_dentry_path so it can make use of it. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:58 +08:00
r = build_dentry_path(rdentry, rdiri, ppath, pathlen, ino,
freepath);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout(" dentry %p %llx/%.*s\n", rdentry, *ino, *pathlen,
*ppath);
ceph: fix encoding of ino only (not relative) paths A 'path' consists of a starting ino and relative component. Encode even when there is no relative component. This is primarily needed by the NFS reexport code. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-16 04:02:37 +08:00
} else if (rpath || rino) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*ino = rino;
*ppath = rpath;
ceph: Fix NULL ptr crash in strlen() set_request_path_attr() checks for NULL ptr before calling strlen() This fixes http://tracker.newdream.net/issues/3404 Signed-off-by: David Zafman <david.zafman@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-10-26 01:23:46 +08:00
*pathlen = rpath ? strlen(rpath) : 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout(" path %.*s\n", *pathlen, rpath);
}
return r;
}
/*
* called under mdsc->mutex
*/
static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req,
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
int mds, bool drop_cap_releases)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
struct ceph_msg *msg;
struct ceph_mds_request_head *head;
const char *path1 = NULL;
const char *path2 = NULL;
u64 ino1 = 0, ino2 = 0;
int pathlen1 = 0, pathlen2 = 0;
int freepath1 = 0, freepath2 = 0;
int len;
u16 releases;
void *p, *end;
int ret;
ret = set_request_path_attr(req->r_inode, req->r_dentry,
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
req->r_parent, req->r_path1, req->r_ino1.ino,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
&path1, &pathlen1, &ino1, &freepath1);
if (ret < 0) {
msg = ERR_PTR(ret);
goto out;
}
ret = set_request_path_attr(NULL, req->r_old_dentry,
ceph: pass parent dir ino info to build_dentry_path In the event that we have a parent inode reference in the request, we can use that instead of mucking about in the dcache. Pass any parent inode info we have down to build_dentry_path so it can make use of it. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:58 +08:00
req->r_old_dentry_dir,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
req->r_path2, req->r_ino2.ino,
&path2, &pathlen2, &ino2, &freepath2);
if (ret < 0) {
msg = ERR_PTR(ret);
goto out_free1;
}
len = sizeof(*head) +
ceph: include time stamp in every MDS request We recently modified the client/MDS protocol to include a timestamp in the client request. This allows ctime updates to follow the client's clock in most cases, which avoids subtle problems when clocks are out of sync and timestamps are updated sometimes by the MDS clock (for most requests) and sometimes by the client clock (for cap writeback). Signed-off-by: Sage Weil <sage@inktank.com>
2014-05-22 08:41:08 +08:00
pathlen1 + pathlen2 + 2*(1 + sizeof(u32) + sizeof(u64)) +
ceph: fix message length computation create_request_message() computes the maximum length of a message, but uses the wrong type for the time stamp: sizeof(struct timespec) may be 8 or 16 depending on the architecture, while sizeof(struct ceph_timespec) is always 8, and that is what gets put into the message. Found while auditing the uses of timespec for y2038 problems. Fixes: b8e69066d8af ("ceph: include time stamp in every MDS request") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-30 21:04:42 +08:00
sizeof(struct ceph_timespec);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* calculate (max) length for cap releases */
len += sizeof(struct ceph_mds_request_release) *
(!!req->r_inode_drop + !!req->r_dentry_drop +
!!req->r_old_inode_drop + !!req->r_old_dentry_drop);
if (req->r_dentry_drop)
len += req->r_dentry->d_name.len;
if (req->r_old_dentry_drop)
len += req->r_old_dentry->d_name.len;
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-10 06:03:46 +08:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_REQUEST, len, GFP_NOFS, false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!msg) {
msg = ERR_PTR(-ENOMEM);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
goto out_free2;
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: message versioning fixes There were two places we were assigning version in host byte order instead of network byte order. Also in MSG_CLIENT_SESSION we weren't setting compat_version in the header to reflect continued compatability with older MDSs. Fixes: http://tracker.ceph.com/issues/9945 Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-31 01:15:26 +08:00
msg->hdr.version = cpu_to_le16(2);
ceph: include transaction id in ceph_msg_header (protocol change) Many (most?) message types include a transaction id. By including it in the fixed size header, we always have it available even when we are unable to allocate memory for the (larger, variable sized) message body. This will allow us to error out the appropriate request instead of (silently) dropping the reply. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 03:24:33 +08:00
msg->hdr.tid = cpu_to_le64(req->r_tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
head = msg->front.iov_base;
p = msg->front.iov_base + sizeof(*head);
end = msg->front.iov_base + msg->front.iov_len;
head->mdsmap_epoch = cpu_to_le32(mdsc->mdsmap->m_epoch);
head->op = cpu_to_le32(req->r_op);
ceph: Convert struct ceph_mds_request to use kuid_t and kgid_t Hold the uid and gid for a pending ceph mds request using the types kuid_t and kgid_t. When a request message is finally created convert the kuid_t and kgid_t values into uids and gids in the initial user namespace. Cc: Sage Weil <sage@inktank.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-01-31 20:01:53 +08:00
head->caller_uid = cpu_to_le32(from_kuid(&init_user_ns, req->r_uid));
head->caller_gid = cpu_to_le32(from_kgid(&init_user_ns, req->r_gid));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
head->args = req->r_args;
ceph_encode_filepath(&p, end, ino1, path1);
ceph_encode_filepath(&p, end, ino2, path2);
ceph: do not include cap/dentry releases in replayed messages Strip the cap and dentry releases from replayed messages. They can cause the shared state to get out of sync because they were generated (with the request message) earlier, and no longer reflect the current client state. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-16 05:58:39 +08:00
/* make note of release offset, in case we need to replay */
req->r_request_release_offset = p - msg->front.iov_base;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* cap releases */
releases = 0;
if (req->r_inode_drop)
releases += ceph_encode_inode_release(&p,
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
req->r_inode ? req->r_inode : d_inode(req->r_dentry),
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mds, req->r_inode_drop, req->r_inode_unless, 0);
if (req->r_dentry_drop)
releases += ceph_encode_dentry_release(&p, req->r_dentry,
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
req->r_parent, mds, req->r_dentry_drop,
ceph: pass parent inode info to ceph_encode_dentry_release if we have it If we have a parent inode reference already, then we don't need to go back up the directory tree to find one. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:59 +08:00
req->r_dentry_unless);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (req->r_old_dentry_drop)
releases += ceph_encode_dentry_release(&p, req->r_old_dentry,
ceph: pass parent inode info to ceph_encode_dentry_release if we have it If we have a parent inode reference already, then we don't need to go back up the directory tree to find one. Link: http://tracker.ceph.com/issues/18148 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-15 21:37:59 +08:00
req->r_old_dentry_dir, mds,
req->r_old_dentry_drop,
req->r_old_dentry_unless);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (req->r_old_inode_drop)
releases += ceph_encode_inode_release(&p,
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
d_inode(req->r_old_dentry),
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mds, req->r_old_inode_drop, req->r_old_inode_unless, 0);
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
if (drop_cap_releases) {
releases = 0;
p = msg->front.iov_base + req->r_request_release_offset;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
head->num_releases = cpu_to_le16(releases);
ceph: include time stamp in every MDS request We recently modified the client/MDS protocol to include a timestamp in the client request. This allows ctime updates to follow the client's clock in most cases, which avoids subtle problems when clocks are out of sync and timestamps are updated sometimes by the MDS clock (for most requests) and sometimes by the client clock (for cap writeback). Signed-off-by: Sage Weil <sage@inktank.com>
2014-05-22 08:41:08 +08:00
/* time stamp */
ceph: fix request time stamp encoding struct timespec uses 'long' to present second and nanosecond. 'long' is 64 bits on 64bits machine. ceph MDS expects time stamp to be encoded as struct ceph_timespec, which uses 'u32' to present second and nanosecond. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-13 15:20:52 +08:00
{
struct ceph_timespec ts;
ceph_encode_timespec(&ts, &req->r_stamp);
ceph_encode_copy(&p, &ts, sizeof(ts));
}
ceph: include time stamp in every MDS request We recently modified the client/MDS protocol to include a timestamp in the client request. This allows ctime updates to follow the client's clock in most cases, which avoids subtle problems when clocks are out of sync and timestamps are updated sometimes by the MDS clock (for most requests) and sometimes by the client clock (for cap writeback). Signed-off-by: Sage Weil <sage@inktank.com>
2014-05-22 08:41:08 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
BUG_ON(p > end);
msg->front.iov_len = p - msg->front.iov_base;
msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
ceph: use pagelist to present MDS request data Current code uses page array to present MDS request data. Pages in the array are allocated/freed by caller of ceph_mdsc_do_request(). If request is interrupted, the pages can be freed while they are still being used by the request message. The fix is use pagelist to present MDS request data. Pagelist is reference counted. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 19:15:28 +08:00
if (req->r_pagelist) {
struct ceph_pagelist *pagelist = req->r_pagelist;
libceph: convert ceph_pagelist.refcnt from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-17 20:10:29 +08:00
refcount_inc(&pagelist->refcnt);
ceph: use pagelist to present MDS request data Current code uses page array to present MDS request data. Pages in the array are allocated/freed by caller of ceph_mdsc_do_request(). If request is interrupted, the pages can be freed while they are still being used by the request message. The fix is use pagelist to present MDS request data. Pagelist is reference counted. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 19:15:28 +08:00
ceph_msg_data_add_pagelist(msg, pagelist);
msg->hdr.data_len = cpu_to_le32(pagelist->length);
} else {
msg->hdr.data_len = 0;
ceph: only set message data pointers if non-empty Change it so we only assign outgoing data information for messages if there is outgoing data to send. This then allows us to add a few more (currently commented-out) assertions. This is related to: http://tracker.ceph.com/issues/4284 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-03-05 12:29:57 +08:00
}
libceph: isolate message page field manipulation Define a function ceph_msg_data_set_pages(), which more clearly abstracts the assignment page-related fields for data in a ceph message structure. Use this new function in the osd client and mds client. Ideally, these fields would never be set more than once (with BUG_ON() calls to guarantee that). At the moment though the osd client sets these every time it receives a message, and in the event of a communication problem this can happen more than once. (This will be resolved shortly, but setting up these helpers first makes it all a bit easier to work with.) Rearrange the field order in a ceph_msg structure to group those that are used to define the possible data payloads. This partially resolves: http://tracker.ceph.com/issues/4263 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
msg->hdr.data_off = cpu_to_le16(0);
out_free2:
if (freepath2)
kfree((char *)path2);
out_free1:
if (freepath1)
kfree((char *)path1);
out:
return msg;
}
/*
* called under mdsc->mutex if error, under no mutex if
* success.
*/
static void complete_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
if (req->r_callback)
req->r_callback(mdsc, req);
else
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-28 04:11:08 +08:00
complete_all(&req->r_completion);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* called under mdsc->mutex
*/
static int __prepare_send_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req,
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
int mds, bool drop_cap_releases)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
struct ceph_mds_request_head *rhead;
struct ceph_msg *msg;
int flags = 0;
req->r_attempts++;
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
if (req->r_inode) {
struct ceph_cap *cap =
ceph_get_cap_for_mds(ceph_inode(req->r_inode), mds);
if (cap)
req->r_sent_on_mseq = cap->mseq;
else
req->r_sent_on_mseq = -1;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags)) {
ceph: include time stamp in replayed MDS requests Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-01 16:54:34 +08:00
void *p;
ceph: reuse request message when replaying against recovering mds Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-16 04:24:32 +08:00
/*
* Replay. Do not regenerate message (and rebuild
* paths, etc.); just use the original message.
* Rebuilding paths will break for renames because
* d_move mangles the src name.
*/
msg = req->r_request;
rhead = msg->front.iov_base;
flags = le32_to_cpu(rhead->flags);
flags |= CEPH_MDS_FLAG_REPLAY;
rhead->flags = cpu_to_le32(flags);
if (req->r_target_inode)
rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
rhead->num_retry = req->r_attempts - 1;
ceph: do not include cap/dentry releases in replayed messages Strip the cap and dentry releases from replayed messages. They can cause the shared state to get out of sync because they were generated (with the request message) earlier, and no longer reflect the current client state. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-16 05:58:39 +08:00
/* remove cap/dentry releases from message */
rhead->num_releases = 0;
ceph: include time stamp in replayed MDS requests Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-01 16:54:34 +08:00
/* time stamp */
p = msg->front.iov_base + req->r_request_release_offset;
ceph: fix request time stamp encoding struct timespec uses 'long' to present second and nanosecond. 'long' is 64 bits on 64bits machine. ceph MDS expects time stamp to be encoded as struct ceph_timespec, which uses 'u32' to present second and nanosecond. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-13 15:20:52 +08:00
{
struct ceph_timespec ts;
ceph_encode_timespec(&ts, &req->r_stamp);
ceph_encode_copy(&p, &ts, sizeof(ts));
}
ceph: include time stamp in replayed MDS requests Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-01 16:54:34 +08:00
msg->front.iov_len = p - msg->front.iov_base;
msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
ceph: reuse request message when replaying against recovering mds Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-16 04:24:32 +08:00
return 0;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (req->r_request) {
ceph_msg_put(req->r_request);
req->r_request = NULL;
}
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
msg = create_request_message(mdsc, req, mds, drop_cap_releases);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (IS_ERR(msg)) {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
req->r_err = PTR_ERR(msg);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
return PTR_ERR(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
req->r_request = msg;
rhead = msg->front.iov_base;
rhead->oldest_client_tid = cpu_to_le64(__get_oldest_tid(mdsc));
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags))
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
flags |= CEPH_MDS_FLAG_REPLAY;
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
if (req->r_parent)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
flags |= CEPH_MDS_FLAG_WANT_DENTRY;
rhead->flags = cpu_to_le32(flags);
rhead->num_fwd = req->r_num_fwd;
rhead->num_retry = req->r_attempts - 1;
ceph: reuse request message when replaying against recovering mds Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-16 04:24:32 +08:00
rhead->ino = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
dout(" r_parent = %p\n", req->r_parent);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return 0;
}
/*
* send request, or put it on the appropriate wait list.
*/
static int __do_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
struct ceph_mds_session *session = NULL;
int mds = -1;
ceph: EIO all operations after forced umount This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-07-01 16:27:46 +08:00
int err = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (req->r_err || test_bit(CEPH_MDS_R_GOT_RESULT, &req->r_req_flags)) {
if (test_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags))
ceph: cleanup aborted requests when re-sending requests. Aborted requests usually get cleared when the reply is received. If MDS crashes, no reply will be received. So we need to cleanup aborted requests when re-sending requests. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-26 14:25:36 +08:00
__unregister_request(mdsc, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
goto out;
ceph: cleanup aborted requests when re-sending requests. Aborted requests usually get cleared when the reply is received. If MDS crashes, no reply will be received. So we need to cleanup aborted requests when re-sending requests. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-26 14:25:36 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (req->r_timeout &&
time_after_eq(jiffies, req->r_started + req->r_timeout)) {
dout("do_request timed out\n");
err = -EIO;
goto finish;
}
ceph: cleanup ACCESS_ONCE -> READ_ONCE This removes the uses of ACCESS_ONCE in favor of READ_ONCE Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-26 17:26:34 +08:00
if (READ_ONCE(mdsc->fsc->mount_state) == CEPH_MOUNT_SHUTDOWN) {
ceph: EIO all operations after forced umount This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-07-01 16:27:46 +08:00
dout("do_request forced umount\n");
err = -EIO;
goto finish;
}
ceph: cleanup ACCESS_ONCE -> READ_ONCE This removes the uses of ACCESS_ONCE in favor of READ_ONCE Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-26 17:26:34 +08:00
if (READ_ONCE(mdsc->fsc->mount_state) == CEPH_MOUNT_MOUNTING) {
ceph: check availability of mds cluster on mount Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-10 16:02:06 +08:00
if (mdsc->mdsmap_err) {
err = mdsc->mdsmap_err;
dout("do_request mdsmap err %d\n", err);
goto finish;
}
ceph: fix mds cluster availability check We should apply the check after getting the initial mdsmap. Fixes: e9e427f0a14f ("ceph: check availability of mds cluster on mount") Link: http://tracker.ceph.com/issues/18161 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2017-01-04 16:21:58 +08:00
if (mdsc->mdsmap->m_epoch == 0) {
dout("do_request no mdsmap, waiting for map\n");
list_add(&req->r_wait, &mdsc->waiting_for_map);
goto finish;
}
ceph: check availability of mds cluster on mount Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-10 16:02:06 +08:00
if (!(mdsc->fsc->mount_options->flags &
CEPH_MOUNT_OPT_MOUNTWAIT) &&
!ceph_mdsmap_is_cluster_available(mdsc->mdsmap)) {
err = -ENOENT;
pr_info("probably no mds server is up\n");
goto finish;
}
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: associate requests with opening sessions Associate request with sessions that aren't yep open. This makes the debugfs mdsc request list more informative. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-03 04:49:00 +08:00
put_request_session(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mds = __choose_mds(mdsc, req);
if (mds < 0 ||
ceph_mdsmap_get_state(mdsc->mdsmap, mds) < CEPH_MDS_STATE_ACTIVE) {
dout("do_request no mds or not active, waiting for map\n");
list_add(&req->r_wait, &mdsc->waiting_for_map);
goto out;
}
/* get, open session */
session = __ceph_lookup_mds_session(mdsc, mds);
ceph: propagate mds session allocation failures to caller Return error to original caller if register_session() fails. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-21 11:43:28 +08:00
if (!session) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
session = register_session(mdsc, mds);
ceph: propagate mds session allocation failures to caller Return error to original caller if register_session() fails. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-21 11:43:28 +08:00
if (IS_ERR(session)) {
err = PTR_ERR(session);
goto finish;
}
}
ceph: associate requests with opening sessions Associate request with sessions that aren't yep open. This makes the debugfs mdsc request list more informative. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-03 04:49:00 +08:00
req->r_session = get_session(session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("do_request mds%d session %p state %s\n", mds, session,
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
ceph_session_state_name(session->s_state));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (session->s_state != CEPH_MDS_SESSION_OPEN &&
session->s_state != CEPH_MDS_SESSION_HUNG) {
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
if (session->s_state == CEPH_MDS_SESSION_REJECTED) {
err = -EACCES;
goto out_session;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (session->s_state == CEPH_MDS_SESSION_NEW ||
session->s_state == CEPH_MDS_SESSION_CLOSING)
__open_session(mdsc, session);
list_add(&req->r_wait, &session->s_waiting);
goto out_session;
}
/* send request */
req->r_resend_mds = -1; /* forget any previous mds hint */
if (req->r_request_started == 0) /* note request start time */
req->r_request_started = jiffies;
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
err = __prepare_send_request(mdsc, req, mds, false);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (!err) {
ceph_msg_get(req->r_request);
ceph_con_send(&session->s_con, req->r_request);
}
out_session:
ceph_put_mds_session(session);
ceph: EIO all operations after forced umount This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-07-01 16:27:46 +08:00
finish:
if (err) {
dout("__do_request early error %d\n", err);
req->r_err = err;
complete_request(mdsc, req);
__unregister_request(mdsc, req);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
out:
return err;
}
/*
* called under mdsc->mutex
*/
static void __wake_requests(struct ceph_mds_client *mdsc,
struct list_head *head)
{
ceph: Fix infinite loop in __wake_requests __wake_requests() will enter infinite loop if we use it to wake requests in the session->s_waiting list. __wake_requests() deletes requests from the list and __do_request() adds requests back to the list. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-11-19 10:49:06 +08:00
struct ceph_mds_request *req;
LIST_HEAD(tmp_list);
list_splice_init(head, &tmp_list);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: Fix infinite loop in __wake_requests __wake_requests() will enter infinite loop if we use it to wake requests in the session->s_waiting list. __wake_requests() deletes requests from the list and __do_request() adds requests back to the list. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-11-19 10:49:06 +08:00
while (!list_empty(&tmp_list)) {
req = list_entry(tmp_list.next,
struct ceph_mds_request, r_wait);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
list_del_init(&req->r_wait);
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
dout(" wake request %p tid %llu\n", req, req->r_tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
__do_request(mdsc, req);
}
}
/*
* Wake up threads with requests pending for @mds, so that they can
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 05:45:05 +08:00
* resubmit their requests to a possibly different mds.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*/
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 05:45:05 +08:00
static void kick_requests(struct ceph_mds_client *mdsc, int mds)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
struct ceph_mds_request *req;
ceph: fix kick_requests() __do_request() may unregister the request. So we should update iterator 'p' before calling __do_request() Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-30 10:12:47 +08:00
struct rb_node *p = rb_first(&mdsc->request_tree);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("kick_requests mds%d\n", mds);
ceph: fix kick_requests() __do_request() may unregister the request. So we should update iterator 'p' before calling __do_request() Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-30 10:12:47 +08:00
while (p) {
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
req = rb_entry(p, struct ceph_mds_request, r_node);
ceph: fix kick_requests() __do_request() may unregister the request. So we should update iterator 'p' before calling __do_request() Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-30 10:12:47 +08:00
p = rb_next(p);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags))
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
continue;
ceph: re-send requests when MDS enters reconnecting stage So that MDS can check if any request is already completed and process completed requests in clientreplay stage. When completed requests are processed in clientreplay stage, MDS can avoid sending traceless replies. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-04 14:26:22 +08:00
if (req->r_attempts > 0)
continue; /* only new requests */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
if (req->r_session &&
req->r_session->s_mds == mds) {
dout(" kicking tid %llu\n", req->r_tid);
ceph: make sure request isn't in any waiting list when kicking request. we may corrupt waiting list if a request in the waiting list is kicked. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-11 14:28:56 +08:00
list_del_init(&req->r_wait);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
__do_request(mdsc, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
}
}
void ceph_mdsc_submit_request(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
dout("submit_request on %p\n", req);
mutex_lock(&mdsc->mutex);
__register_request(mdsc, req, NULL);
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
}
/*
* Synchrously perform an mds request. Take care of all of the
* session setup, forwarding, retry details.
*/
int ceph_mdsc_do_request(struct ceph_mds_client *mdsc,
struct inode *dir,
struct ceph_mds_request *req)
{
int err;
dout("do_request on %p\n", req);
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
/* take CAP_PIN refs for r_inode, r_parent, r_old_dentry */
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (req->r_inode)
ceph_get_cap_refs(ceph_inode(req->r_inode), CEPH_CAP_PIN);
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
if (req->r_parent)
ceph_get_cap_refs(ceph_inode(req->r_parent), CEPH_CAP_PIN);
ceph: do not assume r_old_dentry[_dir] always set together Do not assume that r_old_dentry implies that r_old_dentry_dir is also true. Separate out the ref cleanup and make the debugs dump behave when it is NULL. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-02-06 05:40:09 +08:00
if (req->r_old_dentry_dir)
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:14 +08:00
ceph_get_cap_refs(ceph_inode(req->r_old_dentry_dir),
CEPH_CAP_PIN);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* issue */
mutex_lock(&mdsc->mutex);
__register_request(mdsc, req, dir);
__do_request(mdsc, req);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
if (req->r_err) {
err = req->r_err;
goto out;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
/* wait */
mutex_unlock(&mdsc->mutex);
dout("do_request waiting\n");
ceph: simplify two mount_timeout sites No need to bifurcate wait now that we've got ceph_timeout_jiffies(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 17:05:38 +08:00
if (!req->r_timeout && req->r_wait_for_completion) {
ceph: fix file lock interruption When a lock operation is interrupted, current code sends a unlock request to MDS to undo the lock operation. This method does not work as expected because the unlock request can drop locks that have already been acquired. The fix is use the newly introduced CEPH_LOCK_FCNTL_INTR/CEPH_LOCK_FLOCK_INTR requests to interrupt blocked file lock request. These requests do not drop locks that have alread been acquired, they only interrupt blocked file lock request. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14 10:33:35 +08:00
err = req->r_wait_for_completion(mdsc, req);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
} else {
ceph: simplify two mount_timeout sites No need to bifurcate wait now that we've got ceph_timeout_jiffies(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 17:05:38 +08:00
long timeleft = wait_for_completion_killable_timeout(
&req->r_completion,
ceph_timeout_jiffies(req->r_timeout));
if (timeleft > 0)
err = 0;
else if (!timeleft)
err = -EIO; /* timed out */
else
err = timeleft; /* killed */
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
}
dout("do_request waited, got %d\n", err);
mutex_lock(&mdsc->mutex);
ceph: properly handle aborted mds requests Previously, if the MDS request was interrupted, we would unregister the request and ignore any reply. This could cause the caps or other cache state to become out of sync. (For instance, aborting dbench and doing rm -r on clients would complain about a non-empty directory because the client didn't realize it's aborted file create request completed.) Even we don't unregister, we still can't process the reply normally because we are no longer holding the caller's locks (like the dir i_mutex). So, mark aborted operations with r_aborted, and in the reply handler, be sure to process all the caps. Do not process the namespace changes, though, since we no longer will hold the dir i_mutex. The dentry lease state can also be ignored as it's more forgiving. Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-26 03:33:08 +08:00
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
/* only abort if we didn't race with a real reply */
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_RESULT, &req->r_req_flags)) {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
err = le32_to_cpu(req->r_reply_info.head->result);
} else if (err < 0) {
dout("aborted request %lld with %d\n", req->r_tid, err);
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 03:01:13 +08:00
/*
* ensure we aren't running concurrently with
* ceph_fill_trace or ceph_readdir_prepopulate, which
* rely on locks (dir mutex) held by our caller.
*/
mutex_lock(&req->r_fill_mutex);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
req->r_err = err;
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
set_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags);
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 03:01:13 +08:00
mutex_unlock(&req->r_fill_mutex);
ceph: properly handle aborted mds requests Previously, if the MDS request was interrupted, we would unregister the request and ignore any reply. This could cause the caps or other cache state to become out of sync. (For instance, aborting dbench and doing rm -r on clients would complain about a non-empty directory because the client didn't realize it's aborted file create request completed.) Even we don't unregister, we still can't process the reply normally because we are no longer holding the caller's locks (like the dir i_mutex). So, mark aborted operations with r_aborted, and in the reply handler, be sure to process all the caps. Do not process the namespace changes, though, since we no longer will hold the dir i_mutex. The dentry lease state can also be ignored as it's more forgiving. Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-26 03:33:08 +08:00
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
if (req->r_parent &&
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 01:02:57 +08:00
(req->r_op & CEPH_MDS_OP_WRITE))
ceph_invalidate_dir_request(req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
} else {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
err = req->r_err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
out:
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("do_request %p done, result %d\n", req, err);
return err;
}
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 01:02:57 +08:00
/*
ceph: use i_release_count to indicate dir's completeness Current ceph code tracks directory's completeness in two places. ceph_readdir() checks i_release_count to decide if it can set the I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE flag. This indirection introduces locking complexity. This patch adds a new variable i_complete_count to ceph_inode_info. Set i_release_count's value to it when marking a directory complete. By comparing the two variables, we know if a directory is complete Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-03-13 19:44:32 +08:00
* Invalidate dir's completeness, dentry lease state on an aborted MDS
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 01:02:57 +08:00
* namespace request.
*/
void ceph_invalidate_dir_request(struct ceph_mds_request *req)
{
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
struct inode *inode = req->r_parent;
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 01:02:57 +08:00
ceph: use i_release_count to indicate dir's completeness Current ceph code tracks directory's completeness in two places. ceph_readdir() checks i_release_count to decide if it can set the I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE flag. This indirection introduces locking complexity. This patch adds a new variable i_complete_count to ceph_inode_info. Set i_release_count's value to it when marking a directory complete. By comparing the two variables, we know if a directory is complete Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-03-13 19:44:32 +08:00
dout("invalidate_dir_request %p (complete, lease(s))\n", inode);
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 01:02:57 +08:00
ceph: use i_release_count to indicate dir's completeness Current ceph code tracks directory's completeness in two places. ceph_readdir() checks i_release_count to decide if it can set the I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE flag. This indirection introduces locking complexity. This patch adds a new variable i_complete_count to ceph_inode_info. Set i_release_count's value to it when marking a directory complete. By comparing the two variables, we know if a directory is complete Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-03-13 19:44:32 +08:00
ceph_dir_clear_complete(inode);
ceph: use common helper for aborted dir request invalidation We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 01:02:57 +08:00
if (req->r_dentry)
ceph_invalidate_dentry_lease(req->r_dentry);
if (req->r_old_dentry)
ceph_invalidate_dentry_lease(req->r_old_dentry);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* Handle mds reply.
*
* We take the session mutex and parse and process the reply immediately.
* This preserves the logical ordering of replies, capabilities, etc., sent
* by the MDS as they are applied to our local cache.
*/
static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
{
struct ceph_mds_client *mdsc = session->s_mdsc;
struct ceph_mds_request *req;
struct ceph_mds_reply_head *head = msg->front.iov_base;
struct ceph_mds_reply_info_parsed *rinfo; /* parsed reply info */
ceph: improve reference tracking for snaprealm When snaprealm is created, its initial reference count is zero. But in some rare cases, the newly created snaprealm is not referenced by anyone. This causes snaprealm with zero reference count not freed. The fix is set reference count of newly snaprealm to 1. The reference is return the function who requests to create the snaprealm. When the function finishes its job, it releases the reference. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-23 15:30:54 +08:00
struct ceph_snap_realm *realm;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
u64 tid;
int err, result;
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
int mds = session->s_mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (msg->front.iov_len < sizeof(*head)) {
pr_err("mdsc_handle_reply got corrupt (short) reply\n");
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-15 07:13:47 +08:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return;
}
/* get request, session */
ceph: include transaction id in ceph_msg_header (protocol change) Many (most?) message types include a transaction id. By including it in the fixed size header, we always have it available even when we are unable to allocate memory for the (larger, variable sized) message body. This will allow us to error out the appropriate request instead of (silently) dropping the reply. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 03:24:33 +08:00
tid = le64_to_cpu(msg->hdr.tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_lock(&mdsc->mutex);
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
req = lookup_get_request(mdsc, tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (!req) {
dout("handle_reply on unknown tid %llu\n", tid);
mutex_unlock(&mdsc->mutex);
return;
}
dout("handle_reply %p\n", req);
/* correct session? */
ceph: fix session check on mds reply Fix a broken check that a reply came back from the same MDS we sent the request to. I don't think a case that actually triggers this would ever come up in practice, but it's clearly wrong and easy to fix. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-21 11:50:58 +08:00
if (req->r_session != session) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
pr_err("mdsc_handle_reply got %llu on session mds%d"
" not mds%d\n", tid, session->s_mds,
req->r_session ? req->r_session->s_mds : -1);
mutex_unlock(&mdsc->mutex);
goto out;
}
/* dup? */
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if ((test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags) && !head->safe) ||
(test_bit(CEPH_MDS_R_GOT_SAFE, &req->r_req_flags) && head->safe)) {
fs/ceph: replace pr_warning by pr_warn Update the last pr_warning callsites in fs branch Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Sage Weil <sage@inktank.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:35:37 +08:00
pr_warn("got a dup %s reply on %llu from mds%d\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
head->safe ? "safe" : "unsafe", tid, mds);
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_SAFE, &req->r_req_flags)) {
fs/ceph: replace pr_warning by pr_warn Update the last pr_warning callsites in fs branch Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Sage Weil <sage@inktank.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:35:37 +08:00
pr_warn("got unsafe after safe on %llu from mds%d\n",
ceph: cope with out of order (unsafe after safe) mds reply Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 00:06:02 +08:00
tid, mds);
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
result = le32_to_cpu(head->result);
/*
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
* Handle an ESTALE
* if we're not talking to the authority, send to them
* if the authority has changed while we weren't looking,
* send to new authority
* Otherwise we just have to return an ESTALE
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*/
if (result == -ESTALE) {
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
dout("got ESTALE on request %llu", req->r_tid);
ceph: reset r_resend_mds after receiving -ESTALE this makes __choose_mds() choose mds according caps Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-14 10:48:29 +08:00
req->r_resend_mds = -1;
ceph: handle -ESTALE reply Send requests that operate on path to directory's auth MDS if mode == USE_AUTH_MDS. Always retry using the auth MDS if got -ESTALE reply from non-auth MDS. Also clean up the code that handles auth MDS change. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:21:44 +08:00
if (req->r_direct_mode != USE_AUTH_MDS) {
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
dout("not using auth, setting for that now");
req->r_direct_mode = USE_AUTH_MDS;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
goto out;
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
} else {
ceph: handle -ESTALE reply Send requests that operate on path to directory's auth MDS if mode == USE_AUTH_MDS. Always retry using the auth MDS if got -ESTALE reply from non-auth MDS. Also clean up the code that handles auth MDS change. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:21:44 +08:00
int mds = __choose_mds(mdsc, req);
if (mds >= 0 && mds != req->r_session->s_mds) {
dout("but auth changed, so resending");
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
__do_request(mdsc, req);
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
dout("have to return ESTALE on request %llu", req->r_tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: handle ESTALE properly; on receipt send to authority if it wasn't Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-23 06:58:01 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (head->safe) {
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
set_bit(CEPH_MDS_R_GOT_SAFE, &req->r_req_flags);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
__unregister_request(mdsc, req);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags)) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* We already handled the unsafe response, now do the
* cleanup. No need to examine the response; the MDS
* doesn't include any result info in the safe
* response. And even if it did, there is nothing
* useful we could do with a revised return value.
*/
dout("got safe reply %llu, mds%d\n", tid, mds);
/* last unsafe request during umount? */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
if (mdsc->stopping && !__get_oldest_req(mdsc))
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-28 04:11:08 +08:00
complete_all(&mdsc->safe_umount_waiters);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
goto out;
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
} else {
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
set_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
list_add_tail(&req->r_unsafe_item, &req->r_session->s_unsafe);
ceph: add request to i_unsafe_dirops when getting unsafe reply Previously we add request to i_unsafe_dirops when registering request. So ceph_fsync() also waits for imcomplete requests. This is unnecessary, ceph_fsync() only needs to wait unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 17:18:00 +08:00
if (req->r_unsafe_dir) {
struct ceph_inode_info *ci =
ceph_inode(req->r_unsafe_dir);
spin_lock(&ci->i_unsafe_lock);
list_add_tail(&req->r_unsafe_dir_item,
&ci->i_unsafe_dirops);
spin_unlock(&ci->i_unsafe_lock);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
dout("handle_reply tid %lld result %d\n", tid, result);
rinfo = &req->r_reply_info;
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS This implements the DIRLAYOUTHASH protocol feature, which passes the dir layout over the wire from the MDS. This gives the client knowledge of the correct hash function to use for mapping dentries among dir fragments. Note that if this feature is _not_ present on the client but is on the MDS, the client may misdirect requests. This will result in a forward and degrade performance. It may also result in inaccurate NFS filehandle generation, which will prevent fh resolution when the inode is not present in the client cache and the parent directories have been fragmented. Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-15 09:37:52 +08:00
err = parse_reply_info(msg, rinfo, session->s_con.peer_features);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
if (err < 0) {
ceph: Handle file locks in replies from the MDS. Previously the kernel client incorrectly assumed everything was a directory. Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com> Acked-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-02 06:14:38 +08:00
pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid);
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-15 07:13:47 +08:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
goto out_err;
}
/* snap trace */
ceph: improve reference tracking for snaprealm When snaprealm is created, its initial reference count is zero. But in some rare cases, the newly created snaprealm is not referenced by anyone. This causes snaprealm with zero reference count not freed. The fix is set reference count of newly snaprealm to 1. The reference is return the function who requests to create the snaprealm. When the function finishes its job, it releases the reference. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-23 15:30:54 +08:00
realm = NULL;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (rinfo->snapblob_len) {
down_write(&mdsc->snap_rwsem);
ceph_update_snap_trace(mdsc, rinfo->snapblob,
ceph: improve reference tracking for snaprealm When snaprealm is created, its initial reference count is zero. But in some rare cases, the newly created snaprealm is not referenced by anyone. This causes snaprealm with zero reference count not freed. The fix is set reference count of newly snaprealm to 1. The reference is return the function who requests to create the snaprealm. When the function finishes its job, it releases the reference. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-23 15:30:54 +08:00
rinfo->snapblob + rinfo->snapblob_len,
le32_to_cpu(head->op) == CEPH_MDS_OP_RMSNAP,
&realm);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
downgrade_write(&mdsc->snap_rwsem);
} else {
down_read(&mdsc->snap_rwsem);
}
/* insert trace into our cache */
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 03:01:13 +08:00
mutex_lock(&req->r_fill_mutex);
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-07 10:34:50 +08:00
current->journal_info = req;
ceph: drop session argument to ceph_fill_trace Just get it from r_session since that's what's always passed in. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-01 00:06:13 +08:00
err = ceph_fill_trace(mdsc->fsc->sb, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err == 0) {
ceph: Check for created flag in response from mds The mds now sends back a created inode if the create request performed the create. If the file already existed, no inode is returned in the reply. This allows ceph to set the created flag in atomic_open so that permissions are properly checked in the case that the file wasn't created by the create call to the mds. To ensure compability with previous kernels, a feature for sending back the inode in the create reply was added, so that the mds will only send back the inode if the client indicates it supports the feature. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-29 01:56:46 +08:00
if (result == 0 && (req->r_op == CEPH_MDS_OP_READDIR ||
ceph: handle frag mismatch between readdir request and reply If client has outdated directory fragments information, it may request readdir an non-existent directory fragment. In this case, the MDS finds an approximate directory fragment and sends its contents back to the client. When receiving a reply with fragment that is different than the requested one, the client need to reset the 'readdir offset'. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-18 09:44:13 +08:00
req->r_op == CEPH_MDS_OP_LSSNAP))
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_readdir_prepopulate(req, req->r_session);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-07 10:34:50 +08:00
current->journal_info = NULL;
ceph: fix race between aborted requests and fill_trace When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 03:01:13 +08:00
mutex_unlock(&req->r_fill_mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
up_read(&mdsc->snap_rwsem);
ceph: improve reference tracking for snaprealm When snaprealm is created, its initial reference count is zero. But in some rare cases, the newly created snaprealm is not referenced by anyone. This causes snaprealm with zero reference count not freed. The fix is set reference count of newly snaprealm to 1. The reference is return the function who requests to create the snaprealm. When the function finishes its job, it releases the reference. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-23 15:30:54 +08:00
if (realm)
ceph_put_snap_realm(mdsc, realm);
ceph: make fsync() wait unsafe requests that created/modified inode If we get a unsafe reply for request that created/modified inode, add the unsafe request to a list in the newly created/modified inode. So we can make fsync() wait these unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 18:36:06 +08:00
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (err == 0 && req->r_target_inode &&
test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags)) {
ceph: make fsync() wait unsafe requests that created/modified inode If we get a unsafe reply for request that created/modified inode, add the unsafe request to a list in the newly created/modified inode. So we can make fsync() wait these unsafe requests. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-27 18:36:06 +08:00
struct ceph_inode_info *ci = ceph_inode(req->r_target_inode);
spin_lock(&ci->i_unsafe_lock);
list_add_tail(&req->r_unsafe_target_item, &ci->i_unsafe_iops);
spin_unlock(&ci->i_unsafe_lock);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
out_err:
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
mutex_lock(&mdsc->mutex);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (!test_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags)) {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
if (err) {
req->r_err = err;
} else {
ceph: cleanup use of ceph_msg_get Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-08-18 10:30:38 +08:00
req->r_reply = ceph_msg_get(msg);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
set_bit(CEPH_MDS_R_GOT_RESULT, &req->r_req_flags);
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
} else {
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
dout("reply arrived after request %lld was aborted\n", tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: clean up mds reply, error handling We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-14 02:19:06 +08:00
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&session->s_mutex);
/* kick calling process */
complete_request(mdsc, req);
out:
ceph_mdsc_put_request(req);
return;
}
/*
* handle mds notification that our request has been forwarded.
*/
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
static void handle_forward(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
struct ceph_msg *msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
struct ceph_mds_request *req;
ceph: fix client_request_forward decoding The tid is in the message header, not body. Broken since 6df058c0. No need to look at next mds session; just mark the request and be done. (The old error path was broken too, but now it's gone.) Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-24 06:02:44 +08:00
u64 tid = le64_to_cpu(msg->hdr.tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
u32 next_mds;
u32 fwd_seq;
int err = -EINVAL;
void *p = msg->front.iov_base;
void *end = p + msg->front.iov_len;
ceph: fix client_request_forward decoding The tid is in the message header, not body. Broken since 6df058c0. No need to look at next mds session; just mark the request and be done. (The old error path was broken too, but now it's gone.) Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-24 06:02:44 +08:00
ceph_decode_need(&p, end, 2*sizeof(u32), bad);
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 00:59:09 +08:00
next_mds = ceph_decode_32(&p);
fwd_seq = ceph_decode_32(&p);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_lock(&mdsc->mutex);
libceph: DEFINE_RB_FUNCS macro Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:22 +08:00
req = lookup_get_request(mdsc, tid);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (!req) {
ceph: clean up on forwarded aborted mds request If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-29 07:43:16 +08:00
dout("forward tid %llu to mds%d - req dne\n", tid, next_mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
goto out; /* dup reply? */
}
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags)) {
ceph: clean up on forwarded aborted mds request If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-29 07:43:16 +08:00
dout("forward tid %llu aborted, unregistering\n", tid);
__unregister_request(mdsc, req);
} else if (fwd_seq <= req->r_num_fwd) {
dout("forward tid %llu to mds%d - old seq %d <= %d\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
tid, next_mds, req->r_num_fwd, fwd_seq);
} else {
/* resend. forward race not possible; mds would drop */
ceph: clean up on forwarded aborted mds request If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-29 07:43:16 +08:00
dout("forward tid %llu to mds%d (we resend)\n", tid, next_mds);
BUG_ON(req->r_err);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
BUG_ON(test_bit(CEPH_MDS_R_GOT_RESULT, &req->r_req_flags));
ceph: re-send requests when MDS enters reconnecting stage So that MDS can check if any request is already completed and process completed requests in clientreplay stage. When completed requests are processed in clientreplay stage, MDS can avoid sending traceless replies. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-04 14:26:22 +08:00
req->r_attempts = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
req->r_num_fwd = fwd_seq;
req->r_resend_mds = next_mds;
put_request_session(req);
__do_request(mdsc, req);
}
ceph_mdsc_put_request(req);
out:
mutex_unlock(&mdsc->mutex);
return;
bad:
pr_err("mdsc_handle_forward decode error err=%d\n", err);
}
/*
* handle a mds session control message
*/
static void handle_session(struct ceph_mds_session *session,
struct ceph_msg *msg)
{
struct ceph_mds_client *mdsc = session->s_mdsc;
u32 op;
u64 seq;
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
int mds = session->s_mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_mds_session_head *h = msg->front.iov_base;
int wake = 0;
/* decode */
if (msg->front.iov_len != sizeof(*h))
goto bad;
op = le32_to_cpu(h->op);
seq = le64_to_cpu(h->seq);
mutex_lock(&mdsc->mutex);
ceph: fix potential use-after-free __unregister_session() free the session if it drops the last reference. We should grab an extra reference if we want to use session after __unregister_session(). Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-29 15:30:24 +08:00
if (op == CEPH_SESSION_CLOSE) {
get_session(session);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
__unregister_session(mdsc, session);
ceph: fix potential use-after-free __unregister_session() free the session if it drops the last reference. We should grab an extra reference if we want to use session after __unregister_session(). Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-29 15:30:24 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* FIXME: this ttl calculation is generous */
session->s_ttl = jiffies + HZ*mdsc->mdsmap->m_session_autoclose;
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
dout("handle_session mds%d %s %p state %s seq %llu\n",
mds, ceph_session_op_name(op), session,
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
ceph_session_state_name(session->s_state), seq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (session->s_state == CEPH_MDS_SESSION_HUNG) {
session->s_state = CEPH_MDS_SESSION_OPEN;
pr_info("mds%d came back\n", session->s_mds);
}
switch (op) {
case CEPH_SESSION_OPEN:
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 05:45:05 +08:00
if (session->s_state == CEPH_MDS_SESSION_RECONNECTING)
pr_info("mds%d reconnect success\n", session->s_mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
session->s_state = CEPH_MDS_SESSION_OPEN;
renewed_caps(mdsc, session, 0);
wake = 1;
if (mdsc->stopping)
__close_session(mdsc, session);
break;
case CEPH_SESSION_RENEWCAPS:
if (session->s_renew_seq == seq)
renewed_caps(mdsc, session, 1);
break;
case CEPH_SESSION_CLOSE:
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 05:45:05 +08:00
if (session->s_state == CEPH_MDS_SESSION_RECONNECTING)
pr_info("mds%d reconnect denied\n", session->s_mds);
ceph: cleanup unsafe requests when reconnecting is denied Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-03-24 20:15:36 +08:00
cleanup_session_requests(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
remove_session_caps(session);
ceph: protect kick_requests() with mdsc->mutex Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-11 14:25:18 +08:00
wake = 2; /* for good measure */
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
wake_up_all(&mdsc->session_close_wq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
case CEPH_SESSION_STALE:
pr_info("mds%d caps went stale, renewing\n",
session->s_mds);
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:10 +08:00
spin_lock(&session->s_gen_ttl_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
session->s_cap_gen++;
ceph: don't reset s_cap_ttl to zero Avoid the need to check for a special zero s_cap_ttl value by just using (jiffies - 1) as the value assigned to indicate "sometime in the past." Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:11 +08:00
session->s_cap_ttl = jiffies - 1;
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:10 +08:00
spin_unlock(&session->s_gen_ttl_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
send_renew_caps(mdsc, session);
break;
case CEPH_SESSION_RECALL_STATE:
trim_caps(mdsc, session, le32_to_cpu(h->max_caps));
break;
ceph: handle session flush message Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-11-22 14:48:37 +08:00
case CEPH_SESSION_FLUSHMSG:
send_flushmsg_ack(mdsc, session, seq);
break;
ceph: handle SESSION_FORCE_RO message mark session as readonly and wake up all cap waiters. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-05 11:04:04 +08:00
case CEPH_SESSION_FORCE_RO:
dout("force_session_readonly %p\n", session);
spin_lock(&session->s_cap_lock);
session->s_readonly = true;
spin_unlock(&session->s_cap_lock);
wake_up_session_caps(session, 0);
break;
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
case CEPH_SESSION_REJECT:
WARN_ON(session->s_state != CEPH_MDS_SESSION_OPENING);
pr_info("mds%d rejected session\n", session->s_mds);
session->s_state = CEPH_MDS_SESSION_REJECTED;
cleanup_session_requests(mdsc, session);
remove_session_caps(session);
wake = 2; /* for good measure */
break;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
default:
pr_err("mdsc_handle_session bad op %d mds%d\n", op, mds);
WARN_ON(1);
}
mutex_unlock(&session->s_mutex);
if (wake) {
mutex_lock(&mdsc->mutex);
__wake_requests(mdsc, &session->s_waiting);
ceph: protect kick_requests() with mdsc->mutex Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-11 14:25:18 +08:00
if (wake == 2)
kick_requests(mdsc, mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
}
ceph: fix potential use-after-free __unregister_session() free the session if it drops the last reference. We should grab an extra reference if we want to use session after __unregister_session(). Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-29 15:30:24 +08:00
if (op == CEPH_SESSION_CLOSE)
ceph_put_mds_session(session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return;
bad:
pr_err("mdsc_handle_session corrupt message mds%d len %d\n", mds,
(int)msg->front.iov_len);
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-15 07:13:47 +08:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return;
}
/*
* called under session->mutex.
*/
static void replay_unsafe_requests(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
{
struct ceph_mds_request *req, *nreq;
ceph: re-send requests when MDS enters reconnecting stage So that MDS can check if any request is already completed and process completed requests in clientreplay stage. When completed requests are processed in clientreplay stage, MDS can avoid sending traceless replies. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-04 14:26:22 +08:00
struct rb_node *p;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
int err;
dout("replay_unsafe_requests mds%d\n", session->s_mds);
mutex_lock(&mdsc->mutex);
list_for_each_entry_safe(req, nreq, &session->s_unsafe, r_unsafe_item) {
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
err = __prepare_send_request(mdsc, req, session->s_mds, true);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (!err) {
ceph_msg_get(req->r_request);
ceph_con_send(&session->s_con, req->r_request);
}
}
ceph: re-send requests when MDS enters reconnecting stage So that MDS can check if any request is already completed and process completed requests in clientreplay stage. When completed requests are processed in clientreplay stage, MDS can avoid sending traceless replies. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-04 14:26:22 +08:00
/*
* also re-send old requests when MDS enters reconnect stage. So that MDS
* can process completed request in clientreplay stage.
*/
p = rb_first(&mdsc->request_tree);
while (p) {
req = rb_entry(p, struct ceph_mds_request, r_node);
p = rb_next(p);
ceph: convert bools in ceph_mds_request to a new r_req_flags field Currently, we have a bunch of bool flags in struct ceph_mds_request. We need more flags though, but each bool takes (at least) a byte. Those add up over time. Merge all of the existing bools in this struct into a single unsigned long, and use the set/test/clear_bit macros to manipulate them. These are atomic operations, but that is required here to prevent load/modify/store races. The existing flags are protected by different locks, so we can't rely on them for that purpose. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-02 02:49:09 +08:00
if (test_bit(CEPH_MDS_R_GOT_UNSAFE, &req->r_req_flags))
ceph: re-send requests when MDS enters reconnecting stage So that MDS can check if any request is already completed and process completed requests in clientreplay stage. When completed requests are processed in clientreplay stage, MDS can avoid sending traceless replies. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-04 14:26:22 +08:00
continue;
if (req->r_attempts == 0)
continue; /* only old requests */
if (req->r_session &&
req->r_session->s_mds == session->s_mds) {
ceph: drop cap releases in requests composed before cap reconnect These cap releases are stale because MDS will re-establish client caps according to the cap reconnect messages. Note: MDS can detect stale cap messages, so these stale cap releases are harmless even we don't drop them. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-27 08:54:08 +08:00
err = __prepare_send_request(mdsc, req,
session->s_mds, true);
ceph: re-send requests when MDS enters reconnecting stage So that MDS can check if any request is already completed and process completed requests in clientreplay stage. When completed requests are processed in clientreplay stage, MDS can avoid sending traceless replies. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-04 14:26:22 +08:00
if (!err) {
ceph_msg_get(req->r_request);
ceph_con_send(&session->s_con, req->r_request);
}
}
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
}
/*
* Encode information about a cap for a reconnect with the MDS.
*/
static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
void *arg)
{
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
union {
struct ceph_mds_cap_reconnect v2;
struct ceph_mds_cap_reconnect_v1 v1;
} rec;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_inode_info *ci;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
struct ceph_reconnect_state *recon_state = arg;
struct ceph_pagelist *pagelist = recon_state->pagelist;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
char *path;
int pathlen, err;
u64 pathbase;
ceph: include 'follows' of pending snapflush in cap reconnect message This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-05 09:32:31 +08:00
u64 snap_follows;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct dentry *dentry;
ci = cap->ci;
dout(" adding %p ino %llx.%llx cap %p %lld %s\n",
inode, ceph_vinop(inode), cap, cap->cap_id,
ceph_cap_string(cap->issued));
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
err = ceph_pagelist_encode_64(pagelist, ceph_ino(inode));
if (err)
return err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dentry = d_find_alias(inode);
if (dentry) {
path = ceph_mdsc_build_path(dentry, &pathlen, &pathbase, 0);
if (IS_ERR(path)) {
err = PTR_ERR(path);
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-27 00:26:37 +08:00
goto out_dput;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
} else {
path = NULL;
pathlen = 0;
ceph: initialize pathbase in the !dentry case in encode_caps_cb() pathbase is the base inode; set it to 0 if we've got no path. Coverity-id: 146348 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-08-09 22:12:09 +08:00
pathbase = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
cap->seq = 0; /* reset cap seq */
cap->issue_seq = 0; /* and issue_seq */
ceph: clear migrate seq when MDS restarts Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-31 16:25:36 +08:00
cap->mseq = 0; /* and migrate_seq */
ceph: handle race between cap reconnect and cap release When a cap get released while composing the cap reconnect message. We should skip queuing the release message if the cap hasn't been added to the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 11:08:14 +08:00
cap->cap_gen = cap->session->s_cap_gen;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
if (recon_state->msg_version >= 2) {
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
rec.v2.cap_id = cpu_to_le64(cap->cap_id);
rec.v2.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
rec.v2.issued = cpu_to_le32(cap->issued);
rec.v2.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
rec.v2.pathbase = cpu_to_le64(pathbase);
rec.v2.flock_len = 0;
} else {
rec.v1.cap_id = cpu_to_le64(cap->cap_id);
rec.v1.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
rec.v1.issued = cpu_to_le32(cap->issued);
rec.v1.size = cpu_to_le64(inode->i_size);
ceph_encode_timespec(&rec.v1.mtime, &inode->i_mtime);
ceph_encode_timespec(&rec.v1.atime, &inode->i_atime);
rec.v1.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
rec.v1.pathbase = cpu_to_le64(pathbase);
}
ceph: include 'follows' of pending snapflush in cap reconnect message This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-05 09:32:31 +08:00
if (list_empty(&ci->i_cap_snaps)) {
ceph: properly set snap follows for cap reconnect Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-16 21:42:39 +08:00
snap_follows = ci->i_head_snapc ? ci->i_head_snapc->seq : 0;
ceph: include 'follows' of pending snapflush in cap reconnect message This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-05 09:32:31 +08:00
} else {
struct ceph_cap_snap *capsnap =
list_first_entry(&ci->i_cap_snaps,
struct ceph_cap_snap, ci_item);
snap_follows = capsnap->follows;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
if (recon_state->msg_version >= 2) {
ceph: add flock/fcntl lock support Implement flock inode operation to support advisory file locking. All lock/unlock operations are synchronous with the MDS. Lock state is sent when reconnecting to a recovering MDS to restore the shared lock state. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 06:34:23 +08:00
int num_fcntl_locks, num_flock_locks;
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-16 02:03:35 +08:00
struct ceph_filelock *flocks;
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
size_t struct_len, total_len = 0;
u8 struct_v = 0;
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-16 02:03:35 +08:00
encode_again:
ceph_count_locks(inode, &num_fcntl_locks, &num_flock_locks);
flocks = kmalloc((num_fcntl_locks+num_flock_locks) *
sizeof(struct ceph_filelock), GFP_NOFS);
if (!flocks) {
err = -ENOMEM;
goto out_free;
}
err = ceph_encode_locks_to_buffer(inode, flocks,
num_fcntl_locks,
num_flock_locks);
if (err) {
kfree(flocks);
if (err == -ENOSPC)
goto encode_again;
goto out_free;
}
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
if (recon_state->msg_version >= 3) {
/* version, compat_version and struct_len */
total_len = 2 * sizeof(u8) + sizeof(u32);
ceph: include 'follows' of pending snapflush in cap reconnect message This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-05 09:32:31 +08:00
struct_v = 2;
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
}
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-16 02:03:35 +08:00
/*
* number of encoded locks is stable, so copy to pagelist
*/
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
struct_len = 2 * sizeof(u32) +
(num_fcntl_locks + num_flock_locks) *
sizeof(struct ceph_filelock);
rec.v2.flock_len = cpu_to_le32(struct_len);
struct_len += sizeof(rec.v2);
struct_len += sizeof(u32) + pathlen;
ceph: include 'follows' of pending snapflush in cap reconnect message This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-05 09:32:31 +08:00
if (struct_v >= 2)
struct_len += sizeof(u64); /* snap_follows */
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
total_len += struct_len;
err = ceph_pagelist_reserve(pagelist, total_len);
if (!err) {
if (recon_state->msg_version >= 3) {
ceph_pagelist_encode_8(pagelist, struct_v);
ceph_pagelist_encode_8(pagelist, 1);
ceph_pagelist_encode_32(pagelist, struct_len);
}
ceph_pagelist_encode_string(pagelist, path, pathlen);
ceph_pagelist_append(pagelist, &rec, sizeof(rec.v2));
ceph_locks_to_pagelist(flocks, pagelist,
num_fcntl_locks,
num_flock_locks);
ceph: include 'follows' of pending snapflush in cap reconnect message This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-05 09:32:31 +08:00
if (struct_v >= 2)
ceph_pagelist_encode_64(pagelist, snap_follows);
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
}
ceph: ceph_pagelist_append might sleep while atomic Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jim Schutt <jaschut@sandia.gov> Reviewed-by: Alex Elder <elder@inktank.com>
2013-05-16 02:03:35 +08:00
kfree(flocks);
ceph: fix reconnect encoding for old servers Fix the reconnect encoding to encode the cap record when the MDS does not have the FLOCK capability (i.e., pre v0.22). Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-08 06:59:27 +08:00
} else {
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
size_t size = sizeof(u32) + pathlen + sizeof(rec.v1);
err = ceph_pagelist_reserve(pagelist, size);
if (!err) {
ceph_pagelist_encode_string(pagelist, path, pathlen);
ceph_pagelist_append(pagelist, &rec, sizeof(rec.v1));
}
ceph: add flock/fcntl lock support Implement flock inode operation to support advisory file locking. All lock/unlock operations are synchronous with the MDS. Lock state is sent when reconnecting to a recovering MDS to restore the shared lock state. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 06:34:23 +08:00
}
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
recon_state->nr_caps++;
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-27 00:26:37 +08:00
out_free:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
kfree(path);
ceph: don't BUG on ENOMEM during mds reconnect We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-27 00:26:37 +08:00
out_dput:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dput(dentry);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
return err;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* If an MDS fails and recovers, clients need to reconnect in order to
* reestablish shared state. This includes all caps issued through
* this session _and_ the snap_realm hierarchy. Because it's not
* clear which snap realms the mds cares about, we send everything we
* know about.. that ensures we'll then get any new info the
* recovering MDS might have.
*
* This is a relatively heavyweight operation, but it's rare.
*
* called with mdsc->mutex held.
*/
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:31:25 +08:00
static void send_mds_reconnect(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
struct ceph_msg *reply;
ceph: use rbtree for snap_realms Switch from radix tree to rbtree for snap realms. This is much more appropriate given that realm keys are few and far between. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 06:37:55 +08:00
struct rb_node *p;
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:31:25 +08:00
int mds = session->s_mds;
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 12:58:38 +08:00
int err = -ENOMEM;
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
int s_nr_caps;
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
struct ceph_pagelist *pagelist;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
struct ceph_reconnect_state recon_state;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:31:25 +08:00
pr_info("mds%d reconnect start\n", mds);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
pagelist = kmalloc(sizeof(*pagelist), GFP_NOFS);
if (!pagelist)
goto fail_nopagelist;
ceph_pagelist_init(pagelist);
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-10 06:03:46 +08:00
reply = ceph_msg_new(CEPH_MSG_CLIENT_RECONNECT, 0, GFP_NOFS, false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!reply)
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
goto fail_nomsg;
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:31:25 +08:00
mutex_lock(&session->s_mutex);
session->s_state = CEPH_MDS_SESSION_RECONNECTING;
session->s_seq = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("session %p state %s\n", session,
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
ceph_session_state_name(session->s_state));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: handle race between cap reconnect and cap release When a cap get released while composing the cap reconnect message. We should skip queuing the release message if the cap hasn't been added to the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 11:08:14 +08:00
spin_lock(&session->s_gen_ttl_lock);
session->s_cap_gen++;
spin_unlock(&session->s_gen_ttl_lock);
spin_lock(&session->s_cap_lock);
ceph: handle SESSION_FORCE_RO message mark session as readonly and wake up all cap waiters. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-05 11:04:04 +08:00
/* don't know if session is readonly */
session->s_readonly = 0;
ceph: handle race between cap reconnect and cap release When a cap get released while composing the cap reconnect message. We should skip queuing the release message if the cap hasn't been added to the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 11:08:14 +08:00
/*
* notify __ceph_remove_cap() that we are composing cap reconnect.
* If a cap get released before being added to the cap reconnect,
* __ceph_remove_cap() should skip queuing cap release.
*/
session->s_cap_reconnect = 1;
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
/* drop old cap expires; we're about to reestablish that state */
ceph: don't pre-allocate space for cap release messages Previously we pre-allocate cap release messages for each caps. This wastes lots of memory when there are large amount of caps. This patch make the code not pre-allocate the cap release messages. Instead, we add the corresponding ceph_cap struct to a list when releasing a cap. Later when flush cap releases is needed, we allocate the cap release messages dynamically. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-14 17:22:42 +08:00
cleanup_cap_releases(mdsc, session);
ceph: dicard cap releases on mds restart If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 06:36:44 +08:00
ceph: trim unused inodes before reconnecting to recovering MDS So the recovering MDS does not need to fetch these ununsed inodes during cache rejoin. This may reduce MDS recovery time. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 16:56:23 +08:00
/* trim unused caps to reduce MDS's cache rejoin time */
ceph: fix null pointer dereference in send_mds_reconnect() sb->s_root can be null when umounting Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-07 15:51:08 +08:00
if (mdsc->fsc->sb->s_root)
shrink_dcache_parent(mdsc->fsc->sb->s_root);
ceph: trim unused inodes before reconnecting to recovering MDS So the recovering MDS does not need to fetch these ununsed inodes during cache rejoin. This may reduce MDS recovery time. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-09-10 16:56:23 +08:00
ceph_con_close(&session->s_con);
ceph_con_open(&session->s_con,
CEPH_ENTITY_TYPE_MDS, mds,
ceph_mdsmap_get_addr(mdsc->mdsmap, mds));
/* replay unsafe requests */
replay_unsafe_requests(mdsc, session);
down_read(&mdsc->snap_rwsem);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* traverse this session's caps */
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
s_nr_caps = session->s_nr_caps;
err = ceph_pagelist_encode_32(pagelist, s_nr_caps);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
if (err)
goto fail;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
recon_state.nr_caps = 0;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
recon_state.pagelist = pagelist;
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
if (session->s_con.peer_features & CEPH_FEATURE_MDSENC)
recon_state.msg_version = 3;
else if (session->s_con.peer_features & CEPH_FEATURE_FLOCK)
recon_state.msg_version = 2;
else
recon_state.msg_version = 1;
ceph: support v2 reconnect encoding Encode either old or v2 encoding of client_reconnect message, depending on whether the peer has the FLOCK feature bit. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-13 06:21:32 +08:00
err = iterate_session_caps(session, encode_caps_cb, &recon_state);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (err < 0)
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 12:58:38 +08:00
goto fail;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: handle race between cap reconnect and cap release When a cap get released while composing the cap reconnect message. We should skip queuing the release message if the cap hasn't been added to the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 11:08:14 +08:00
spin_lock(&session->s_cap_lock);
session->s_cap_reconnect = 0;
spin_unlock(&session->s_cap_lock);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* snaprealms. we provide mds with the ino, seq (version), and
* parent for all of our realms. If the mds has any newer info,
* it will tell us.
*/
ceph: use rbtree for snap_realms Switch from radix tree to rbtree for snap realms. This is much more appropriate given that realm keys are few and far between. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 06:37:55 +08:00
for (p = rb_first(&mdsc->snap_realms); p; p = rb_next(p)) {
struct ceph_snap_realm *realm =
rb_entry(p, struct ceph_snap_realm, node);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
struct ceph_mds_snaprealm_reconnect sr_rec;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout(" adding snap realm %llx seq %lld parent %llx\n",
realm->ino, realm->seq, realm->parent_ino);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
sr_rec.ino = cpu_to_le64(realm->ino);
sr_rec.seq = cpu_to_le64(realm->seq);
sr_rec.parent = cpu_to_le64(realm->parent_ino);
err = ceph_pagelist_append(pagelist, &sr_rec, sizeof(sr_rec));
if (err)
goto fail;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: update cap reconnect message to version 3 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 22:05:18 +08:00
reply->hdr.version = cpu_to_le16(recon_state.msg_version);
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
/* raced with cap release? */
if (s_nr_caps != recon_state.nr_caps) {
struct page *page = list_first_entry(&pagelist->head,
struct page, lru);
__le32 *addr = kmap_atomic(page);
*addr = cpu_to_le32(recon_state.nr_caps);
kunmap_atomic(addr);
ceph: only set message data pointers if non-empty Change it so we only assign outgoing data information for messages if there is outgoing data to send. This then allows us to add a few more (currently commented-out) assertions. This is related to: http://tracker.ceph.com/issues/4284 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-03-05 12:29:57 +08:00
}
ceph: set caps count after composing cap reconnect message It's possible that some caps get released while composing the cap reconnect message. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-09-22 10:28:10 +08:00
reply->hdr.data_len = cpu_to_le32(pagelist->length);
ceph_msg_data_add_pagelist(reply, pagelist);
ceph: re-send flushing caps (which are revoked) in reconnect stage if flushing caps were revoked, we should re-send the cap flush in client reconnect stage. This guarantees that MDS processes the cap flush message before issuing the flushing caps to other client. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 15:17:56 +08:00
ceph_early_kick_flushing_caps(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_con_send(&session->s_con, reply);
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 12:58:38 +08:00
mutex_unlock(&session->s_mutex);
mutex_lock(&mdsc->mutex);
__wake_requests(mdsc, &session->s_waiting);
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
up_read(&mdsc->snap_rwsem);
return;
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
fail:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_msg_put(reply);
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 12:58:38 +08:00
up_read(&mdsc->snap_rwsem);
mutex_unlock(&session->s_mutex);
ceph: use ceph_pagelist for mds reconnect message; change encoding (protocol change) Use the ceph_pagelist to encode the MDS reconnect message. We change the message encoding (protocol change!) at the same time to make our life easier (we don't know how many snaprealms we have when we start encoding). An empty message implies the session is closed/does not exist. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 04:21:51 +08:00
fail_nomsg:
ceph_pagelist_release(pagelist);
fail_nopagelist:
ceph: fix locking for waking session requests after reconnect The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 12:58:38 +08:00
pr_err("error %d preparing reconnect for mds%d\n", err, mds);
return;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* compare old and new mdsmaps, kicking requests
* and closing out old connections as necessary
*
* called under mdsc->mutex.
*/
static void check_new_map(struct ceph_mds_client *mdsc,
struct ceph_mdsmap *newmap,
struct ceph_mdsmap *oldmap)
{
int i;
int oldstate, newstate;
struct ceph_mds_session *s;
dout("check_new_map new %u old %u\n",
newmap->m_epoch, oldmap->m_epoch);
ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds mdsmap::m_max_mds is the expected count of active mds. It's not the max rank of active mds. User can decrease mdsmap::m_max_mds, but does not stop mds whose rank >= mdsmap::m_max_mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:04:13 +08:00
for (i = 0; i < oldmap->m_num_mds && i < mdsc->max_sessions; i++) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (mdsc->sessions[i] == NULL)
continue;
s = mdsc->sessions[i];
oldstate = ceph_mdsmap_get_state(oldmap, i);
newstate = ceph_mdsmap_get_state(newmap, i);
ceph: track laggy state of mds from mdsmap Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 05:19:01 +08:00
dout("check_new_map mds%d state %s%s -> %s%s (session %s)\n",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
i, ceph_mds_state_name(oldstate),
ceph: track laggy state of mds from mdsmap Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 05:19:01 +08:00
ceph_mdsmap_is_laggy(oldmap, i) ? " (laggy)" : "",
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_mds_state_name(newstate),
ceph: track laggy state of mds from mdsmap Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 05:19:01 +08:00
ceph_mdsmap_is_laggy(newmap, i) ? " (laggy)" : "",
ceph: export ceph_session_state_name function ...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-09-19 20:51:08 +08:00
ceph_session_state_name(s->s_state));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds mdsmap::m_max_mds is the expected count of active mds. It's not the max rank of active mds. User can decrease mdsmap::m_max_mds, but does not stop mds whose rank >= mdsmap::m_max_mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:04:13 +08:00
if (i >= newmap->m_num_mds ||
ceph: Fix oops when handling mdsmap that decreases max_mds When i >= newmap->m_max_mds, ceph_mdsmap_get_addr(newmap, i) return NULL. Passing NULL to memcmp() triggers oops. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2012-09-20 17:42:25 +08:00
memcmp(ceph_mdsmap_get_addr(oldmap, i),
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_mdsmap_get_addr(newmap, i),
sizeof(struct ceph_entity_addr))) {
if (s->s_state == CEPH_MDS_SESSION_OPENING) {
/* the session never opened, just close it
* out now */
ceph: fix potential use-after-free __unregister_session() free the session if it drops the last reference. We should grab an extra reference if we want to use session after __unregister_session(). Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-29 15:30:24 +08:00
get_session(s);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
__unregister_session(mdsc, s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
__wake_requests(mdsc, &s->s_waiting);
ceph: fix potential use-after-free __unregister_session() free the session if it drops the last reference. We should grab an extra reference if we want to use session after __unregister_session(). Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-29 15:30:24 +08:00
ceph_put_mds_session(s);
ceph: close stopped mds' session If a mds has stopped, close its session and clean up its session requests/caps. The process is similar to handling SESSION_CLOSE initiated by mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:56:29 +08:00
} else if (i >= newmap->m_num_mds) {
/* force close session for stopped mds */
get_session(s);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
__unregister_session(mdsc, s);
ceph: close stopped mds' session If a mds has stopped, close its session and clean up its session requests/caps. The process is similar to handling SESSION_CLOSE initiated by mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:56:29 +08:00
__wake_requests(mdsc, &s->s_waiting);
kick_requests(mdsc, i);
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
cleanup_session_requests(mdsc, s);
remove_session_caps(s);
mutex_unlock(&s->s_mutex);
ceph_put_mds_session(s);
mutex_lock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
} else {
/* just close it */
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
mutex_lock(&mdsc->mutex);
ceph_con_close(&s->s_con);
mutex_unlock(&s->s_mutex);
s->s_state = CEPH_MDS_SESSION_RESTARTING;
}
} else if (oldstate == newstate) {
continue; /* nothing new with this mds */
}
/*
* send reconnect?
*/
if (s->s_state == CEPH_MDS_SESSION_RESTARTING &&
ceph: clean up send_mds_reconnect interface Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 07:31:25 +08:00
newstate >= CEPH_MDS_STATE_RECONNECT) {
mutex_unlock(&mdsc->mutex);
send_mds_reconnect(mdsc, s);
mutex_lock(&mdsc->mutex);
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 05:45:05 +08:00
* kick request on any mds that has gone active.
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
*/
if (oldstate < CEPH_MDS_STATE_ACTIVE &&
newstate >= CEPH_MDS_STATE_ACTIVE) {
ceph: wait for mds OPEN reply to indicate reconnect success We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 05:45:05 +08:00
if (oldstate != CEPH_MDS_STATE_CREATING &&
oldstate != CEPH_MDS_STATE_STARTING)
pr_info("mds%d recovery completed\n", s->s_mds);
kick_requests(mdsc, i);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_kick_flushing_caps(mdsc, s);
ceph: reset requested max_size after mds reconnect The max_size increase request to the MDS can get lost during an MDS restart and reconnect. Reset our requested value after the MDS recovers, so that any blocked writes will re-request a larger max_size upon waking. Also, explicit wake session caps after the reconnect. Normally the cap renewal catches this, but not in the cases where the caps didn't go stale in the first place, which would leave writers waiting on max_size asleep. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 05:43:45 +08:00
wake_up_session_caps(s, 1);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
}
ceph: connect to export targets if mds is laggy If an MDS we are talking to may have failed, we need to open sessions to its potential export targets to ensure that any in-progress migration that may have involved some of our caps is properly handled. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:35 +08:00
ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds mdsmap::m_max_mds is the expected count of active mds. It's not the max rank of active mds. User can decrease mdsmap::m_max_mds, but does not stop mds whose rank >= mdsmap::m_max_mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-28 17:04:13 +08:00
for (i = 0; i < newmap->m_num_mds && i < mdsc->max_sessions; i++) {
ceph: connect to export targets if mds is laggy If an MDS we are talking to may have failed, we need to open sessions to its potential export targets to ensure that any in-progress migration that may have involved some of our caps is properly handled. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 04:38:35 +08:00
s = mdsc->sessions[i];
if (!s)
continue;
if (!ceph_mdsmap_is_laggy(newmap, i))
continue;
if (s->s_state == CEPH_MDS_SESSION_OPEN ||
s->s_state == CEPH_MDS_SESSION_HUNG ||
s->s_state == CEPH_MDS_SESSION_CLOSING) {
dout(" connecting to export targets of laggy mds%d\n",
i);
__open_export_target_sessions(mdsc, s);
}
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* leases
*/
/*
* caller must hold session s_mutex, dentry->d_lock
*/
void __ceph_mdsc_drop_dentry_lease(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
ceph_put_mds_session(di->lease_session);
di->lease_session = NULL;
}
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
static void handle_lease(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
struct ceph_msg *msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct super_block *sb = mdsc->fsc->sb;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct inode *inode;
struct dentry *parent, *dentry;
struct ceph_dentry_info *di;
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
int mds = session->s_mds;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_mds_lease *h = msg->front.iov_base;
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-05 01:05:40 +08:00
u32 seq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_vino vino;
struct qstr dname;
int release = 0;
dout("handle_lease from mds%d\n", mds);
/* decode */
if (msg->front.iov_len < sizeof(*h) + sizeof(u32))
goto bad;
vino.ino = le64_to_cpu(h->ino);
vino.snap = CEPH_NOSNAP;
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-05 01:05:40 +08:00
seq = le32_to_cpu(h->seq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dname.name = (void *)h + sizeof(*h) + sizeof(u32);
dname.len = msg->front.iov_len - sizeof(*h) - sizeof(u32);
if (dname.len != get_unaligned_le32(h+1))
goto bad;
/* lookup inode */
inode = ceph_find_inode(sb, vino);
ceph: ignore lease mask The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:28:25 +08:00
dout("handle_lease %s, ino %llx %p %.*s\n",
ceph_lease_op_name(h->action), vino.ino, inode,
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-05 01:05:40 +08:00
dname.len, dname.name);
ceph: move ceph_find_inode() outside the s_mutex ceph_find_inode() may wait on freeing inode, using it inside the s_mutex may cause deadlock. (the freeing inode is waiting for OSD read reply, but dispatch thread is blocked by the s_mutex) Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-17 07:45:12 +08:00
mutex_lock(&session->s_mutex);
session->s_seq++;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
if (inode == NULL) {
dout("handle_lease no inode %llx\n", vino.ino);
goto release;
}
/* dentry */
parent = d_find_alias(inode);
if (!parent) {
dout("no parent dentry on inode %p\n", inode);
WARN_ON(1);
goto release; /* hrm... */
}
vfs: make the string hashes salt the hash We always mixed in the parent pointer into the dentry name hash, but we did it late at lookup time. It turns out that we can simplify that lookup-time action by salting the hash with the parent pointer early instead of late. A few other users of our string hashes also wanted to mix in their own pointers into the hash, and those are updated to use the same mechanism. Hash users that don't have any particular initial salt can just use the NULL pointer as a no-salt. Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-10 22:51:30 +08:00
dname.hash = full_name_hash(parent, dname.name, dname.len);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dentry = d_lookup(parent, &dname);
dput(parent);
if (!dentry)
goto release;
spin_lock(&dentry->d_lock);
di = ceph_dentry(dentry);
switch (h->action) {
case CEPH_MDS_LEASE_REVOKE:
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
if (di->lease_session == session) {
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-05 01:05:40 +08:00
if (ceph_seq_cmp(di->lease_seq, seq) > 0)
h->seq = cpu_to_le32(di->lease_seq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
__ceph_mdsc_drop_dentry_lease(dentry);
}
release = 1;
break;
case CEPH_MDS_LEASE_RENEW:
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
if (di->lease_session == session &&
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
di->lease_gen == session->s_cap_gen &&
di->lease_renew_from &&
di->lease_renew_after == 0) {
unsigned long duration =
ceph: use msecs_to_jiffies for time conversion This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-06 19:52:17 +08:00
msecs_to_jiffies(le32_to_cpu(h->duration_ms));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: fix lease revocation when seq doesn't match If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-05 01:05:40 +08:00
di->lease_seq = seq;
ceph: don't use ->d_time Pretty simple: just use ceph_dentry_info.time instead (which was already there, unused). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-22 22:35:04 +08:00
di->time = di->lease_renew_from + duration;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
di->lease_renew_after = di->lease_renew_from +
(duration >> 1);
di->lease_renew_from = 0;
}
break;
}
spin_unlock(&dentry->d_lock);
dput(dentry);
if (!release)
goto out;
release:
/* let's just reuse the same message */
h->action = CEPH_MDS_LEASE_REVOKE_ACK;
ceph_msg_get(msg);
ceph_con_send(&session->s_con, msg);
out:
iput(inode);
mutex_unlock(&session->s_mutex);
return;
bad:
pr_err("corrupt lease message\n");
ceph: hex dump corrupt server data to KERN_DEBUG Also, print fsid using standard format, NOT hex dump. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-15 07:13:47 +08:00
ceph_msg_dump(msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
void ceph_mdsc_lease_send_msg(struct ceph_mds_session *session,
struct inode *inode,
struct dentry *dentry, char action,
u32 seq)
{
struct ceph_msg *msg;
struct ceph_mds_lease *lease;
int len = sizeof(*lease) + sizeof(u32);
int dnamelen = 0;
dout("lease_send_msg inode %p dentry %p %s to mds%d\n",
inode, dentry, ceph_lease_op_name(action), session->s_mds);
dnamelen = dentry->d_name.len;
len += dnamelen;
libceph: don't complain on msgpool alloc failures The pool allocation failures are masked by the pool; there is no need to spam the console about them. (That's the whole point of having the pool in the first place.) Mark msg allocations whose failure is safely handled as such. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-10 06:03:46 +08:00
msg = ceph_msg_new(CEPH_MSG_CLIENT_LEASE, len, GFP_NOFS, false);
ceph: make ceph_msg_new return NULL on failure; clean up, fix callers Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 07:06:19 +08:00
if (!msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return;
lease = msg->front.iov_base;
lease->action = action;
lease->ino = cpu_to_le64(ceph_vino(inode).ino);
lease->first = lease->last = cpu_to_le64(ceph_vino(inode).snap);
lease->seq = cpu_to_le32(seq);
put_unaligned_le32(dnamelen, lease + 1);
memcpy((void *)(lease + 1) + 4, dentry->d_name.name, dnamelen);
/*
* if this is a preemptive lease RELEASE, no need to
* flush request stream, since the actual request will
* soon follow.
*/
msg->more_to_follow = (action == CEPH_MDS_LEASE_RELEASE);
ceph_con_send(&session->s_con, msg);
}
/*
* drop all leases (and dentry refs) in preparation for umount
*/
static void drop_leases(struct ceph_mds_client *mdsc)
{
int i;
dout("drop_leases\n");
mutex_lock(&mdsc->mutex);
for (i = 0; i < mdsc->max_sessions; i++) {
struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
if (!s)
continue;
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
mutex_unlock(&s->s_mutex);
ceph_put_mds_session(s);
mutex_lock(&mdsc->mutex);
}
mutex_unlock(&mdsc->mutex);
}
/*
* delayed work -- periodically trim expired leases, renew caps with mds
*/
static void schedule_delayed(struct ceph_mds_client *mdsc)
{
int delay = 5;
unsigned hz = round_jiffies_relative(HZ * delay);
schedule_delayed_work(&mdsc->delayed_work, hz);
}
static void delayed_work(struct work_struct *work)
{
int i;
struct ceph_mds_client *mdsc =
container_of(work, struct ceph_mds_client, delayed_work.work);
int renew_interval;
int renew_caps;
dout("mdsc delayed_work\n");
ceph: flush dirty caps via the cap_dirty list Previously we were flushing dirty caps by passing an extra flag when traversing the delayed caps list. Besides being a bit ugly, that can also miss caps that are dirty but didn't result in a cap requeue: notably, mark_caps_dirty(). Separate the flushing into a separate helper, and traverse the cap_dirty list. This also brings i_dirty_item in line with i_dirty_caps: we are on the list IFF caps != 0. We carry an inode ref IFF dirty_caps|flushing_caps != 0. Lose the unused return value from __ceph_mark_caps_dirty(). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 05:27:38 +08:00
ceph_check_delayed_caps(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_lock(&mdsc->mutex);
renew_interval = mdsc->mdsmap->m_session_timeout >> 2;
renew_caps = time_after_eq(jiffies, HZ*renew_interval +
mdsc->last_renew_caps);
if (renew_caps)
mdsc->last_renew_caps = jiffies;
for (i = 0; i < mdsc->max_sessions; i++) {
struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
if (s == NULL)
continue;
if (s->s_state == CEPH_MDS_SESSION_CLOSING) {
dout("resending session close request for mds%d\n",
s->s_mds);
request_close_session(mdsc, s);
ceph_put_mds_session(s);
continue;
}
if (s->s_ttl && time_after(jiffies, s->s_ttl)) {
if (s->s_state == CEPH_MDS_SESSION_OPEN) {
s->s_state = CEPH_MDS_SESSION_HUNG;
pr_info("mds%d hung\n", s->s_mds);
}
}
if (s->s_state < CEPH_MDS_SESSION_OPEN) {
/* this mds is failed or recovering, just wait */
ceph_put_mds_session(s);
continue;
}
mutex_unlock(&mdsc->mutex);
mutex_lock(&s->s_mutex);
if (renew_caps)
send_renew_caps(mdsc, s);
else
ceph_con_keepalive(&s->s_con);
ceph: only send cap releases when mds is OPEN|HUNG On OPENING we shouldn't have any caps (or releases). On CLOSING, we should wait until we succeed (and throw it all out), or don't (and are OPEN again). On RECONNECTING we can wait until we are OPEN. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-18 07:30:21 +08:00
if (s->s_state == CEPH_MDS_SESSION_OPEN ||
s->s_state == CEPH_MDS_SESSION_HUNG)
ceph: release cap on import if we don't have the inode If we get an IMPORT that give us a cap, but we don't have the inode, queue a release (and try to send it immediately) so that the MDS doesn't get stuck waiting for us. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 07:47:10 +08:00
ceph_send_cap_releases(mdsc, s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&s->s_mutex);
ceph_put_mds_session(s);
mutex_lock(&mdsc->mutex);
}
mutex_unlock(&mdsc->mutex);
schedule_delayed(mdsc);
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
int ceph_mdsc_init(struct ceph_fs_client *fsc)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_mds_client *mdsc;
mdsc = kzalloc(sizeof(struct ceph_mds_client), GFP_NOFS);
if (!mdsc)
return -ENOMEM;
mdsc->fsc = fsc;
fsc->mdsc = mdsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_init(&mdsc->mutex);
mdsc->mdsmap = kzalloc(sizeof(*mdsc->mdsmap), GFP_NOFS);
ceph: Free mdsc if alloc mdsc->mdsmap failed. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-06-25 14:48:19 +08:00
if (mdsc->mdsmap == NULL) {
kfree(mdsc);
ceph: handle kzalloc() failure Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-26 18:04:40 +08:00
return -ENOMEM;
ceph: Free mdsc if alloc mdsc->mdsmap failed. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-06-25 14:48:19 +08:00
}
ceph: handle kzalloc() failure Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-26 18:04:40 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
init_completion(&mdsc->safe_umount_waiters);
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
init_waitqueue_head(&mdsc->session_close_wq);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_LIST_HEAD(&mdsc->waiting_for_map);
mdsc->sessions = NULL;
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions) use an atomic variable to track number of sessions, this can avoid block operation inside wait loops. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-09 17:00:42 +08:00
atomic_set(&mdsc->num_sessions, 0);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mdsc->max_sessions = 0;
mdsc->stopping = 0;
ceph: make sure syncfs flushes all cap snaps Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-05 21:22:13 +08:00
mdsc->last_snap_seq = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
init_rwsem(&mdsc->snap_rwsem);
ceph: use rbtree for snap_realms Switch from radix tree to rbtree for snap realms. This is much more appropriate given that realm keys are few and far between. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 06:37:55 +08:00
mdsc->snap_realms = RB_ROOT;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_LIST_HEAD(&mdsc->snap_empty);
spin_lock_init(&mdsc->snap_empty_lock);
mdsc->last_tid = 0;
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
mdsc->oldest_tid = 0;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
mdsc->request_tree = RB_ROOT;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_DELAYED_WORK(&mdsc->delayed_work, delayed_work);
mdsc->last_renew_caps = jiffies;
INIT_LIST_HEAD(&mdsc->cap_delay_list);
spin_lock_init(&mdsc->cap_delay_lock);
INIT_LIST_HEAD(&mdsc->snap_flush_list);
spin_lock_init(&mdsc->snap_flush_lock);
ceph: track pending caps flushing accurately Previously we do not trace accurate TID for flushing caps. when MDS failovers, we have no choice but to re-send all flushing caps with a new TID. This can cause problem because MDS can has already flushed some caps and has issued the same caps to other client. The re-sent cap flush has a new TID, which makes MDS unable to detect if it has already processed the cap flush. This patch adds code to track pending caps flushing accurately. When re-sending cap flush is needed, we use its original flush TID. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 15:48:57 +08:00
mdsc->last_cap_flush_tid = 1;
ceph: use list instead of rbtree to track cap flushes We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-06 11:12:56 +08:00
INIT_LIST_HEAD(&mdsc->cap_flush_list);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
INIT_LIST_HEAD(&mdsc->cap_dirty);
ceph: fix cap flush race reentrancy In e9964c10 we change cap flushing to do a delicate dance because some inodes on the cap_dirty list could be in a migrating state (got EXPORT but not IMPORT) in which we couldn't actually flush and move from dirty->flushing, breaking the while (!empty) { process first } loop structure. It worked for a single sync thread, but was not reentrant and triggered infinite loops when multiple syncers came along. Instead, move inodes with dirty to a separate cap_dirty_migrating list when in the limbo export-but-no-import state, allowing us to go back to the simple loop structure (which was reentrant). This is cleaner and more robust. Audited the cap_dirty users and this looks fine: list_empty(&ci->i_dirty_item) is still a reliable indicator of whether we have dirty caps (which list we're on is irrelevant) and list_del_init() calls still do the right thing. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-25 02:46:31 +08:00
INIT_LIST_HEAD(&mdsc->cap_dirty_migrating);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mdsc->num_cap_flushing = 0;
spin_lock_init(&mdsc->cap_dirty_lock);
init_waitqueue_head(&mdsc->cap_flushing_wq);
spin_lock_init(&mdsc->dentry_lru_lock);
INIT_LIST_HEAD(&mdsc->dentry_lru);
ceph: handle kzalloc() failure Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-26 18:04:40 +08:00
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_caps_init(mdsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_adjust_min_caps(mdsc, fsc->min_caps);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph: check OSD caps before read/write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-27 15:33:28 +08:00
init_rwsem(&mdsc->pool_perm_rwsem);
mdsc->pool_perm_tree = RB_ROOT;
ceph: handle errors during osd client init Unwind initializing if we get ENOMEM during client initialization. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 06:52:18 +08:00
return 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* Wait for safe replies on open mds requests. If we time out, drop
* all requests from the tree to avoid dangling dentry refs.
*/
static void wait_requests(struct ceph_mds_client *mdsc)
{
libceph: store timeouts in jiffies, verify user input There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-05-15 17:02:17 +08:00
struct ceph_options *opts = mdsc->fsc->client->options;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_mds_request *req;
mutex_lock(&mdsc->mutex);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
if (__get_oldest_req(mdsc)) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("wait_requests waiting for requests\n");
wait_for_completion_timeout(&mdsc->safe_umount_waiters,
libceph: store timeouts in jiffies, verify user input There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-05-15 17:02:17 +08:00
ceph_timeout_jiffies(opts->mount_timeout));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* tear down remaining requests */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
mutex_lock(&mdsc->mutex);
while ((req = __get_oldest_req(mdsc))) {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("wait_requests timed out on tid %llu\n",
req->r_tid);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
__unregister_request(mdsc, req);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
}
mutex_unlock(&mdsc->mutex);
dout("wait_requests done\n");
}
/*
* called before mount is ro, and before dentries are torn down.
* (hmm, does this still race with new lookups?)
*/
void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc)
{
dout("pre_umount\n");
mdsc->stopping = 1;
drop_leases(mdsc);
ceph: flush dirty caps via the cap_dirty list Previously we were flushing dirty caps by passing an extra flag when traversing the delayed caps list. Besides being a bit ugly, that can also miss caps that are dirty but didn't result in a cap requeue: notably, mark_caps_dirty(). Separate the flushing into a separate helper, and traverse the cap_dirty list. This also brings i_dirty_item in line with i_dirty_caps: we are on the list IFF caps != 0. We carry an inode ref IFF dirty_caps|flushing_caps != 0. Lose the unused return value from __ceph_mark_caps_dirty(). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 05:27:38 +08:00
ceph_flush_dirty_caps(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
wait_requests(mdsc);
ceph: delay umount until all mds requests drop inode+dentry refs This fixes a race between handle_reply finishing an mds request, signalling completion, and then dropping the request structing and its dentry+inode refs, and pre_umount function waiting for requests to finish before letting the vfs tear down the dcache. If umount was delayed waiting for mds requests, we could race and BUG in shrink_dcache_for_umount_subtree because of a slow dput. This delays umount until the msgr queue flushes, which means handle_reply will exit and will have dropped the ceph_mds_request struct. I'm assuming the VFS has already ensured that its calls have all completed and those request refs have thus been dropped as well (I haven't seen that race, at least). Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-22 07:12:26 +08:00
/*
* wait for reply handlers to drop their request refs and
* their inode/dcache refs
*/
ceph_msgr_flush();
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
/*
* wait for all write mds requests to flush.
*/
static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
{
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 06:28:54 +08:00
struct ceph_mds_request *req = NULL, *nextreq;
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
struct rb_node *n;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_lock(&mdsc->mutex);
dout("wait_unsafe_requests want %lld\n", want_tid);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 06:28:54 +08:00
restart:
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
req = __get_oldest_req(mdsc);
while (req && req->r_tid <= want_tid) {
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 06:28:54 +08:00
/* find next request */
n = rb_next(&req->r_node);
if (n)
nextreq = rb_entry(n, struct ceph_mds_request, r_node);
else
nextreq = NULL;
ceph: exclude setfilelock requests when calculating oldest tid setfilelock requests can block for a long time, which can prevent client from advancing its oldest tid. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-05-19 18:54:40 +08:00
if (req->r_op != CEPH_MDS_OP_SETFILELOCK &&
(req->r_op & CEPH_MDS_OP_WRITE)) {
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
/* write op */
ceph_mdsc_get_request(req);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 06:28:54 +08:00
if (nextreq)
ceph_mdsc_get_request(nextreq);
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
mutex_unlock(&mdsc->mutex);
dout("wait_unsafe_requests wait on %llu (want %llu)\n",
req->r_tid, want_tid);
wait_for_completion(&req->r_safe_completion);
mutex_lock(&mdsc->mutex);
ceph_mdsc_put_request(req);
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 06:28:54 +08:00
if (!nextreq)
break; /* next dne before, so we're done! */
if (RB_EMPTY_NODE(&nextreq->r_node)) {
/* next request was removed from tree */
ceph_mdsc_put_request(nextreq);
goto restart;
}
ceph_mdsc_put_request(nextreq); /* won't go away */
ceph: use rbtree for mds requests The rbtree is a more appropriate data structure than a radix_tree. It avoids extra memory usage and simplifies the code. It also fixes a bug where the debugfs 'mdsc' file wasn't including the most recent mds request. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 04:08:46 +08:00
}
ceph: fix mds sync() race with completing requests The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-17 06:28:54 +08:00
req = nextreq;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
mutex_unlock(&mdsc->mutex);
dout("wait_unsafe_requests done\n");
}
void ceph_mdsc_sync(struct ceph_mds_client *mdsc)
{
ceph: unify cap flush and snapcap flush This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 18:06:41 +08:00
u64 want_tid, want_flush;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph: cleanup ACCESS_ONCE -> READ_ONCE This removes the uses of ACCESS_ONCE in favor of READ_ONCE Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-26 17:26:34 +08:00
if (READ_ONCE(mdsc->fsc->mount_state) == CEPH_MOUNT_SHUTDOWN)
ceph: skip mds sync on forced unmount Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 06:22:00 +08:00
return;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("sync\n");
mutex_lock(&mdsc->mutex);
want_tid = mdsc->last_tid;
mutex_unlock(&mdsc->mutex);
ceph: flush dirty caps via the cap_dirty list Previously we were flushing dirty caps by passing an extra flag when traversing the delayed caps list. Besides being a bit ugly, that can also miss caps that are dirty but didn't result in a cap requeue: notably, mark_caps_dirty(). Separate the flushing into a separate helper, and traverse the cap_dirty list. This also brings i_dirty_item in line with i_dirty_caps: we are on the list IFF caps != 0. We carry an inode ref IFF dirty_caps|flushing_caps != 0. Lose the unused return value from __ceph_mark_caps_dirty(). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 05:27:38 +08:00
ceph_flush_dirty_caps(mdsc);
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync) check_cap_flush() calls mutex_lock(), which may block. So we can't use it as condition check function for wait_event(); Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-08 21:30:12 +08:00
spin_lock(&mdsc->cap_dirty_lock);
ceph: track pending caps flushing globally So we know TID of the oldest pending caps flushing. Later patch will send this information to MDS, so that MDS can trim its completed caps flush list. Tracking pending caps flushing globally also simplifies syncfs code. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-09 17:20:12 +08:00
want_flush = mdsc->last_cap_flush_tid;
ceph: optimize cap flush waiting Add a 'wake' flag to ceph_cap_flush struct, which indicates if there is someone waiting for it to finish. When getting flush ack message, we check the 'wake' flag in corresponding ceph_cap_flush struct to decide if we should wake up waiters. One corner case is that the acked cap flush has 'wake' flags is set, but it is not the first one on the flushing list. We do not wake up waiters in this case, set 'wake' flags of preceding ceph_cap_flush struct instead Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-07 15:22:38 +08:00
if (!list_empty(&mdsc->cap_flush_list)) {
struct ceph_cap_flush *cf =
list_last_entry(&mdsc->cap_flush_list,
struct ceph_cap_flush, g_list);
cf->wake = true;
}
ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync) check_cap_flush() calls mutex_lock(), which may block. So we can't use it as condition check function for wait_event(); Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-08 21:30:12 +08:00
spin_unlock(&mdsc->cap_dirty_lock);
ceph: unify cap flush and snapcap flush This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 18:06:41 +08:00
dout("sync want tid %lld flush_seq %lld\n",
want_tid, want_flush);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
wait_unsafe_requests(mdsc, want_tid);
ceph: unify cap flush and snapcap flush This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-04 18:06:41 +08:00
wait_caps_flush(mdsc, want_flush);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
/*
* true if all sessions are closed, or we force unmount
*/
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
static bool done_closing_sessions(struct ceph_mds_client *mdsc, int skipped)
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
{
ceph: cleanup ACCESS_ONCE -> READ_ONCE This removes the uses of ACCESS_ONCE in favor of READ_ONCE Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-12-26 17:26:34 +08:00
if (READ_ONCE(mdsc->fsc->mount_state) == CEPH_MOUNT_SHUTDOWN)
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
return true;
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
return atomic_read(&mdsc->num_sessions) <= skipped;
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* called after sb is ro.
*/
void ceph_mdsc_close_sessions(struct ceph_mds_client *mdsc)
{
libceph: store timeouts in jiffies, verify user input There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-05-15 17:02:17 +08:00
struct ceph_options *opts = mdsc->fsc->client->options;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
struct ceph_mds_session *session;
int i;
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
int skipped = 0;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("close_sessions\n");
/* close sessions */
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
mutex_lock(&mdsc->mutex);
for (i = 0; i < mdsc->max_sessions; i++) {
session = __ceph_lookup_mds_session(mdsc, i);
if (!session)
continue;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
mutex_lock(&session->s_mutex);
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
if (__close_session(mdsc, session) <= 0)
skipped++;
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_lock(&mdsc->mutex);
}
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
mutex_unlock(&mdsc->mutex);
dout("waiting for sessions to close\n");
ceph: handle CEPH_SESSION_REJECT message Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 16:39:51 +08:00
wait_event_timeout(mdsc->session_close_wq,
done_closing_sessions(mdsc, skipped),
libceph: store timeouts in jiffies, verify user input There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-05-15 17:02:17 +08:00
ceph_timeout_jiffies(opts->mount_timeout));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/* tear down remaining sessions */
ceph: fix multiple mds session shutdown The use of a completion when waiting for session shutdown during umount is inappropriate, given the complexity of the condition. For multiple MDS's, this resulted in the umount thread spinning, often preventing the session close message from being processed in some cases. Switch to a waitqueue and defined a condition helper. This cleans things up nicely. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-12 05:51:23 +08:00
mutex_lock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
for (i = 0; i < mdsc->max_sessions; i++) {
if (mdsc->sessions[i]) {
session = get_session(mdsc->sessions[i]);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
__unregister_session(mdsc, session);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
remove_session_caps(session);
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
mutex_lock(&mdsc->mutex);
}
}
WARN_ON(!list_empty(&mdsc->cap_delay_list));
mutex_unlock(&mdsc->mutex);
ceph_cleanup_empty_realms(mdsc);
cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
dout("stopped\n");
}
ceph: EIO all operations after forced umount This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-07-01 16:27:46 +08:00
void ceph_mdsc_force_umount(struct ceph_mds_client *mdsc)
{
struct ceph_mds_session *session;
int mds;
dout("force umount\n");
mutex_lock(&mdsc->mutex);
for (mds = 0; mds < mdsc->max_sessions; mds++) {
session = __ceph_lookup_mds_session(mdsc, mds);
if (!session)
continue;
mutex_unlock(&mdsc->mutex);
mutex_lock(&session->s_mutex);
__close_session(mdsc, session);
if (session->s_state == CEPH_MDS_SESSION_CLOSING) {
cleanup_session_requests(mdsc, session);
remove_session_caps(session);
}
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
mutex_lock(&mdsc->mutex);
kick_requests(mdsc, mds);
}
__wake_requests(mdsc, &mdsc->waiting_for_map);
mutex_unlock(&mdsc->mutex);
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static void ceph_mdsc_stop(struct ceph_mds_client *mdsc)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
dout("stop\n");
cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
if (mdsc->mdsmap)
ceph_mdsmap_destroy(mdsc->mdsmap);
kfree(mdsc->sessions);
ceph: do caps accounting per mds_client Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-18 07:16:12 +08:00
ceph_caps_finalize(mdsc);
ceph: check OSD caps before read/write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-27 15:33:28 +08:00
ceph_pool_perm_destroy(mdsc);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
void ceph_mdsc_destroy(struct ceph_fs_client *fsc)
{
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: flush msgr_wq during mds_client shutdown The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-26 04:27:48 +08:00
dout("mdsc_destroy %p\n", mdsc);
/* flush out any connection work with references to us */
ceph_msgr_flush();
ceph: avoid invalid memory dereference in the middle of umount extra_mon_dispatch() and debugfs' foo_show functions dereference fsc->mdsc. we should clean up fsc->client->extra_mon_dispatch and debugfs before destroying fsc->mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-22 16:26:34 +08:00
ceph_mdsc_stop(mdsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mdsc = NULL;
kfree(mdsc);
ceph: flush msgr_wq during mds_client shutdown The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-26 04:27:48 +08:00
dout("mdsc_destroy %p done\n", mdsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
}
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
void ceph_mdsc_handle_fsmap(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
{
struct ceph_fs_client *fsc = mdsc->fsc;
const char *mds_namespace = fsc->mount_options->mds_namespace;
void *p = msg->front.iov_base;
void *end = p + msg->front.iov_len;
u32 epoch;
u32 map_len;
u32 num_fs;
u32 mount_fscid = (u32)-1;
u8 struct_v, struct_cv;
int err = -EINVAL;
ceph_decode_need(&p, end, sizeof(u32), bad);
epoch = ceph_decode_32(&p);
dout("handle_fsmap epoch %u\n", epoch);
ceph_decode_need(&p, end, 2 + sizeof(u32), bad);
struct_v = ceph_decode_8(&p);
struct_cv = ceph_decode_8(&p);
map_len = ceph_decode_32(&p);
ceph_decode_need(&p, end, sizeof(u32) * 3, bad);
p += sizeof(u32) * 2; /* skip epoch and legacy_client_fscid */
num_fs = ceph_decode_32(&p);
while (num_fs-- > 0) {
void *info_p, *info_end;
u32 info_len;
u8 info_v, info_cv;
u32 fscid, namelen;
ceph_decode_need(&p, end, 2 + sizeof(u32), bad);
info_v = ceph_decode_8(&p);
info_cv = ceph_decode_8(&p);
info_len = ceph_decode_32(&p);
ceph_decode_need(&p, end, info_len, bad);
info_p = p;
info_end = p + info_len;
p = info_end;
ceph_decode_need(&info_p, info_end, sizeof(u32) * 2, bad);
fscid = ceph_decode_32(&info_p);
namelen = ceph_decode_32(&info_p);
ceph_decode_need(&info_p, info_end, namelen, bad);
if (mds_namespace &&
strlen(mds_namespace) == namelen &&
!strncmp(mds_namespace, (char *)info_p, namelen)) {
mount_fscid = fscid;
break;
}
}
ceph_monc_got_map(&fsc->client->monc, CEPH_SUB_FSMAP, epoch);
if (mount_fscid != (u32)-1) {
fsc->client->monc.fs_cluster_id = mount_fscid;
ceph_monc_want_map(&fsc->client->monc, CEPH_SUB_MDSMAP,
0, true);
ceph_monc_renew_subs(&fsc->client->monc);
} else {
err = -ENOENT;
goto err_out;
}
return;
bad:
pr_err("error decoding fsmap\n");
err_out:
mutex_lock(&mdsc->mutex);
mdsc->mdsmap_err = -ENOENT;
__wake_requests(mdsc, &mdsc->waiting_for_map);
mutex_unlock(&mdsc->mutex);
return;
}
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
/*
* handle mds map update.
*/
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
void ceph_mdsc_handle_mdsmap(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
{
u32 epoch;
u32 maplen;
void *p = msg->front.iov_base;
void *end = p + msg->front.iov_len;
struct ceph_mdsmap *newmap, *oldmap;
struct ceph_fsid fsid;
int err = -EINVAL;
ceph_decode_need(&p, end, sizeof(fsid)+2*sizeof(u32), bad);
ceph_decode_copy(&p, &fsid, sizeof(fsid));
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (ceph_check_fsid(mdsc->fsc->client, &fsid) < 0)
ceph: fix debugfs entry, simplify fsid checks We may first learn our fsid from any of the mon, osd, or mds maps (whichever the monitor sends first). Consolidate checks in a single helper. Initialize the client debugfs entry then, since we need the fsid (and global_id) for the directory name. Also remove dead mount code. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:50:41 +08:00
return;
ceph: convert encode/decode macros to inlines This avoids the fugly pass by reference and makes the code a bit easier to read. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-15 00:59:09 +08:00
epoch = ceph_decode_32(&p);
maplen = ceph_decode_32(&p);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
dout("handle_map epoch %u len %d\n", epoch, (int)maplen);
/* do we need it? */
mutex_lock(&mdsc->mutex);
if (mdsc->mdsmap && epoch <= mdsc->mdsmap->m_epoch) {
dout("handle_map epoch %u <= our %u\n",
epoch, mdsc->mdsmap->m_epoch);
mutex_unlock(&mdsc->mutex);
return;
}
newmap = ceph_mdsmap_decode(&p, end);
if (IS_ERR(newmap)) {
err = PTR_ERR(newmap);
goto bad_unlock;
}
/* swap into place */
if (mdsc->mdsmap) {
oldmap = mdsc->mdsmap;
mdsc->mdsmap = newmap;
check_new_map(mdsc, newmap, oldmap);
ceph_mdsmap_destroy(oldmap);
} else {
mdsc->mdsmap = newmap; /* first mds map */
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
mdsc->fsc->sb->s_maxbytes = mdsc->mdsmap->m_max_file_size;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
__wake_requests(mdsc, &mdsc->waiting_for_map);
libceph: revamp subs code, switch to SUBSCRIBE2 protocol It is currently hard-coded in the mon_client that mdsmap and monmap subs are continuous, while osdmap sub is always "onetime". To better handle full clusters/pools in the osd_client, we need to be able to issue continuous osdmap subs. Revamp subs code to allow us to specify for each sub whether it should be continuous or not. Although not strictly required for the above, switch to SUBSCRIBE2 protocol while at it, eliminating the ambiguity between a request for "every map since X" and a request for "just the latest" when we don't have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now required - it's been supported since pre-argonaut (2010). Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling in before we validate the epoch and successfully install the new map can mess up mon_client sub state. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-01-19 23:19:06 +08:00
ceph_monc_got_map(&mdsc->fsc->client->monc, CEPH_SUB_MDSMAP,
mdsc->mdsmap->m_epoch);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
mutex_unlock(&mdsc->mutex);
schedule_delayed(mdsc);
return;
bad_unlock:
mutex_unlock(&mdsc->mutex);
bad:
pr_err("error decoding mdsmap %d\n", err);
return;
}
static struct ceph_connection *con_get(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
if (get_session(s)) {
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
dout("mdsc con_get %p ok (%d)\n", s, refcount_read(&s->s_ref));
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
return con;
}
dout("mdsc con_get %p FAIL\n", s);
return NULL;
}
static void con_put(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-03 17:15:06 +08:00
dout("mdsc con_put %p (%d)\n", s, refcount_read(&s->s_ref) - 1);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_put_mds_session(s);
}
/*
* if the client is unresponsive for long enough, the mds will kill
* the session entirely.
*/
static void peer_reset(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
ceph: attempt mds reconnect if mds closes our session Currently, if our session is closed (due to a timeout, or explicit close, or whatever), we just sit there doing nothing unless/until the MDS restarts, at which point we try to reconnect. Change client to attempt an immediate reconnect if our session is closed. Note that currently the MDS doesn't support this, and our attempt will fail. We'll get a session CLOSE, our caps and dirty cap state will be dropped, and the client will be free to attempt to reconnect. That's clearly not as nice as a successful reconnect, but it at least allows us to try to carry on, and in the future the MDS will support a reconnect and we will fare better. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 04:59:12 +08:00
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
fs/ceph: replace pr_warning by pr_warn Update the last pr_warning callsites in fs branch Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Sage Weil <sage@inktank.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:35:37 +08:00
pr_warn("mds%d closed our session\n", s->s_mds);
ceph: attempt mds reconnect if mds closes our session Currently, if our session is closed (due to a timeout, or explicit close, or whatever), we just sit there doing nothing unless/until the MDS restarts, at which point we try to reconnect. Change client to attempt an immediate reconnect if our session is closed. Note that currently the MDS doesn't support this, and our attempt will fail. We'll get a session CLOSE, our caps and dirty cap state will be dropped, and the client will be free to attempt to reconnect. That's clearly not as nice as a successful reconnect, but it at least allows us to try to carry on, and in the future the MDS will support a reconnect and we will fare better. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-19 04:59:12 +08:00
send_mds_reconnect(mdsc, s);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
}
static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
int type = le16_to_cpu(msg->hdr.type);
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
mutex_lock(&mdsc->mutex);
if (__verify_registered_session(mdsc, s) < 0) {
mutex_unlock(&mdsc->mutex);
goto out;
}
mutex_unlock(&mdsc->mutex);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
switch (type) {
case CEPH_MSG_MDS_MAP:
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
ceph_mdsc_handle_mdsmap(mdsc, msg);
break;
case CEPH_MSG_FS_MAP_USER:
ceph_mdsc_handle_fsmap(mdsc, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
case CEPH_MSG_CLIENT_SESSION:
handle_session(s, msg);
break;
case CEPH_MSG_CLIENT_REPLY:
handle_reply(s, msg);
break;
case CEPH_MSG_CLIENT_REQUEST_FORWARD:
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
handle_forward(mdsc, s, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
case CEPH_MSG_CLIENT_CAPS:
ceph_handle_caps(s, msg);
break;
case CEPH_MSG_CLIENT_SNAP:
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
ceph_handle_snap(mdsc, s, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
case CEPH_MSG_CLIENT_LEASE:
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
handle_lease(mdsc, s, msg);
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
break;
default:
pr_err("received unknown message type %d %s\n", type,
ceph_msg_type_name(type));
}
ceph: drop messages on unregistered mds sessions; cleanup Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 07:12:16 +08:00
out:
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
ceph_msg_put(msg);
}
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
/*
* authentication
*/
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
/*
* Note: returned pointer is the address of a structure that's
* managed separately. Caller must *not* attempt to free it.
*/
static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
ceph: use info returned by get_authorizer Rather than passing a bunch of arguments to be filled in with the content of the ceph_auth_handshake buffer now returned by the get_authorizer method, just use the returned information in the caller, and drop the unnecessary arguments. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
int *proto, int force_new)
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
struct ceph_auth_handshake *auth = &s->s_auth;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
if (force_new && auth->authorizer) {
libceph: make authorizer destruction independent of ceph_auth_client Starting the kernel client with cephx disabled and then enabling cephx and restarting userspace daemons can result in a crash: [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000 [262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130 [262671.584334] PGD 0 [262671.635847] Oops: 0000 [#1] SMP [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014 [262672.268937] Workqueue: ceph-msgr con_work [libceph] [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000 [262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130 [262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286 [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018 [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012 [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000 [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40 [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840 [262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000 [262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0 [262673.417556] Stack: [262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04 [262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00 [262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800 [262673.805230] Call Trace: [262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph] [262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph] [262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph] [262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph] [262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph] [262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph] [262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph] [262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph] [262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph] [262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690 [262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph] [262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0 [262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470 [262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310 [262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0 [262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 [262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70 [262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 What happens is the following: (1) new MON session is established (2) old "none" ac is destroyed (3) new "cephx" ac is constructed ... (4) old OSD session (w/ "none" authorizer) is put ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer) osd->o_auth.authorizer in the "none" case is just a bare pointer into ac, which contains a single static copy for all services. By the time we get to (4), "none" ac, freed in (2), is long gone. On top of that, a new vtable installed in (3) points us at ceph_x_destroy_authorizer(), so we end up trying to destroy a "none" authorizer with a "cephx" destructor operating on invalid memory! To fix this, decouple authorizer destruction from ac and do away with a single static "none" authorizer by making a copy for each OSD or MDS session. Authorizers themselves are independent of ac and so there is no reason for destroy_authorizer() to be an ac op. Make it an op on the authorizer itself by turning ceph_authorizer into a real struct. Fixes: http://tracker.ceph.com/issues/15447 Reported-by: Alan Zhang <alan.zhang@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-04-12 01:34:49 +08:00
ceph_auth_destroy_authorizer(auth->authorizer);
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
auth->authorizer = NULL;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
}
libceph: wrap auth ops in wrapper functions Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-03-26 01:26:14 +08:00
if (!auth->authorizer) {
int ret = ceph_auth_create_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
auth);
libceph: add update_authorizer auth method Currently the messenger calls out to a get_authorizer con op, which will create a new authorizer if it doesn't yet have one. In the meantime, when we rotate our service keys, the authorizer doesn't get updated. Eventually it will be rejected by the server on a new connection attempt and get invalidated, and we will then rebuild a new authorizer, but this is not ideal. Instead, if we do have an authorizer, call a new update_authorizer op that will verify that the current authorizer is using the latest secret. If it is not, we will build a new one that does. This avoids the transient failure. This fixes one of the sorry sequence of events for bug http://tracker.ceph.com/issues/4282 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-03-26 01:26:01 +08:00
if (ret)
return ERR_PTR(ret);
libceph: wrap auth ops in wrapper functions Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-03-26 01:26:14 +08:00
} else {
int ret = ceph_auth_update_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
auth);
ceph: ensure auth ops are defined before use In the create_authorizer method for both the mds and osd clients, the auth_client->ops pointer is blindly dereferenced. There is no obvious guarantee that this pointer has been assigned. And furthermore, even if the ops pointer is non-null there is definitely no guarantee that the create_authorizer or destroy_authorizer methods are defined. Add checks in both routines to make sure they are defined (non-null) before use. Add similar checks in a few other spots in these files while we're at it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
if (ret)
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
return ERR_PTR(ret);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
}
*proto = ac->protocol;
ceph: messenger: reduce args to create_authorizer Make use of the new ceph_auth_handshake structure in order to reduce the number of arguments passed to the create_authorizor method in ceph_auth_client_ops. Use a local variable of that type as a shorthand in the get_authorizer method definitions. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
ceph: have get_authorizer methods return pointers Have the get_authorizer auth_client method return a ceph_auth pointer rather than an integer, pointer-encoding any returned error value. This is to pave the way for making use of the returned value in an upcoming patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:39 +08:00
return auth;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
}
libceph: drop len argument of *verify_authorizer_reply() The length of the reply is protocol-dependent - for cephx it's ceph_x_authorize_reply. Nothing sensible can be passed from the messenger layer anyway. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-12-02 23:35:09 +08:00
static int verify_authorizer_reply(struct ceph_connection *con)
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
libceph: drop len argument of *verify_authorizer_reply() The length of the reply is protocol-dependent - for cephx it's ceph_x_authorize_reply. Nothing sensible can be passed from the messenger layer anyway. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-12-02 23:35:09 +08:00
return ceph_auth_verify_authorizer_reply(ac, s->s_auth.authorizer);
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
}
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 08:21:06 +08:00
static int invalidate_authorizer(struct ceph_connection *con)
{
struct ceph_mds_session *s = con->private;
struct ceph_mds_client *mdsc = s->s_mdsc;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 08:21:06 +08:00
libceph: wrap auth ops in wrapper functions Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-03-26 01:26:14 +08:00
ceph_auth_invalidate_authorizer(ac, CEPH_ENTITY_TYPE_MDS);
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 08:21:06 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
return ceph_monc_validate_auth(&mdsc->fsc->client->monc);
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 08:21:06 +08:00
}
libceph: define mds_alloc_msg() method The only user of the ceph messenger that doesn't define an alloc_msg method is the mds client. Define one, such that it works just like it did before, and simplify ceph_con_in_msg_alloc() by assuming the alloc_msg method is always present. This and the next patch resolve: http://tracker.ceph.com/issues/4322 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-03-02 08:00:14 +08:00
static struct ceph_msg *mds_alloc_msg(struct ceph_connection *con,
struct ceph_msg_header *hdr, int *skip)
{
struct ceph_msg *msg;
int type = (int) le16_to_cpu(hdr->type);
int front_len = (int) le32_to_cpu(hdr->front_len);
if (con->in_msg)
return con->in_msg;
*skip = 0;
msg = ceph_msg_new(type, front_len, GFP_NOFS, false);
if (!msg) {
pr_err("unable to allocate msg type %d len %d\n",
type, front_len);
return NULL;
}
return msg;
}
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
static int mds_sign_message(struct ceph_msg *msg)
libceph: message signature support Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-04 16:33:37 +08:00
{
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
struct ceph_mds_session *s = msg->con->private;
libceph: message signature support Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-04 16:33:37 +08:00
struct ceph_auth_handshake *auth = &s->s_auth;
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
libceph: message signature support Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-04 16:33:37 +08:00
return ceph_auth_sign_message(auth, msg);
}
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
static int mds_check_message_signature(struct ceph_msg *msg)
libceph: message signature support Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-04 16:33:37 +08:00
{
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
struct ceph_mds_session *s = msg->con->private;
libceph: message signature support Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-04 16:33:37 +08:00
struct ceph_auth_handshake *auth = &s->s_auth;
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
libceph: message signature support Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-04 16:33:37 +08:00
return ceph_auth_check_message_signature(auth, msg);
}
ceph: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-20 16:40:19 +08:00
static const struct ceph_connection_operations mds_con_ops = {
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
.get = con_get,
.put = con_put,
.dispatch = dispatch,
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
.get_authorizer = get_authorizer,
.verify_authorizer_reply = verify_authorizer_reply,
ceph: allow renewal of auth credentials Add infrastructure to allow the mon_client to periodically renew its auth credentials. Also add a messenger callback that will force such a renewal if a peer rejects our authenticator. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-03 08:21:06 +08:00
.invalidate_authorizer = invalidate_authorizer,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
.peer_reset = peer_reset,
libceph: define mds_alloc_msg() method The only user of the ceph messenger that doesn't define an alloc_msg method is the mds client. Define one, such that it works just like it did before, and simplify ceph_con_in_msg_alloc() by assuming the alloc_msg method is always present. This and the next patch resolve: http://tracker.ceph.com/issues/4322 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-03-02 08:00:14 +08:00
.alloc_msg = mds_alloc_msg,
libceph: msg signing callouts don't need con argument We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-27 05:23:56 +08:00
.sign_message = mds_sign_message,
.check_message_signature = mds_check_message_signature,
ceph: MDS client The MDS (metadata server) client is responsible for submitting requests to the MDS cluster and parsing the response. We decide which MDS to submit each request to based on cached information about the current partition of the directory hierarchy across the cluster. A stateful session is opened with each MDS before we submit requests to it, and a mutex is used to control the ordering of messages within each session. An MDS request may generate two responses. The first indicates the operation was a success and returns any result. A second reply is sent when the operation commits to disk. Note that locking on the MDS ensures that the results of updates are visible only to the updating client before the operation commits. Requests are linked to the containing directory so that an fsync will wait for them to commit. If an MDS fails and/or recovers, we resubmit requests as needed. We also reconnect existing capabilities to a recovering MDS to reestablish that shared session state. Old dentry leases are invalidated. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:09 +08:00
};
/* eof */
Copy Permalink