2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
linux-next/include/uapi/asm-generic/siginfo.h

301 lines
8.4 KiB
C
Raw Normal View History

#ifndef _UAPI_ASM_GENERIC_SIGINFO_H
#define _UAPI_ASM_GENERIC_SIGINFO_H
#include <linux/compiler.h>
#include <linux/types.h>
typedef union sigval {
int sival_int;
void __user *sival_ptr;
} sigval_t;
/*
* This is the size (including padding) of the part of the
* struct siginfo that is before the union.
*/
#ifndef __ARCH_SI_PREAMBLE_SIZE
#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
#endif
#define SI_MAX_SIZE 128
#ifndef SI_PAD_SIZE
#define SI_PAD_SIZE ((SI_MAX_SIZE - __ARCH_SI_PREAMBLE_SIZE) / sizeof(int))
#endif
#ifndef __ARCH_SI_UID_T
#define __ARCH_SI_UID_T __kernel_uid32_t
#endif
/*
* The default "si_band" type is "long", as specified by POSIX.
* However, some architectures want to override this to "int"
* for historical compatibility reasons, so we allow that.
*/
#ifndef __ARCH_SI_BAND_T
#define __ARCH_SI_BAND_T long
#endif
#ifndef __ARCH_SI_CLOCK_T
#define __ARCH_SI_CLOCK_T __kernel_clock_t
#endif
#ifndef __ARCH_SI_ATTRIBUTES
#define __ARCH_SI_ATTRIBUTES
#endif
#ifndef HAVE_ARCH_SIGINFO_T
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
__kernel_pid_t _pid; /* sender's pid */
__ARCH_SI_UID_T _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
__kernel_timer_t _tid; /* timer id */
int _overrun; /* overrun count */
char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
sigval_t _sigval; /* same as below */
int _sys_private; /* not to be passed to user */
} _timer;
/* POSIX.1b signals */
struct {
__kernel_pid_t _pid; /* sender's pid */
__ARCH_SI_UID_T _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
__kernel_pid_t _pid; /* which child */
__ARCH_SI_UID_T _uid; /* sender's uid */
int _status; /* exit code */
__ARCH_SI_CLOCK_T _utime;
__ARCH_SI_CLOCK_T _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void __user *_addr; /* faulting insn/memory ref. */
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
short _addr_lsb; /* LSB of the reported address */
signals, pkeys: Notify userspace about protection key faults A protection key fault is very similar to any other access error. There must be a VMA, etc... We even want to take the same action (SIGSEGV) that we do with a normal access fault. However, we do need to let userspace know that something is different. We do this the same way what we did with SEGV_BNDERR with Memory Protection eXtensions (MPX): define a new SEGV code: SEGV_PKUERR. We add a siginfo field: si_pkey that reveals to userspace which protection key was set on the PTE that we faulted on. There is no other easy way for userspace to figure this out. They could parse smaps but that would be a bit cruel. We share space with in siginfo with _addr_bnd. #BR faults from MPX are completely separate from page faults (#PF) that trigger from protection key violations, so we never need both at the same time. Note that _pkey is a 64-bit value. The current hardware only supports 4-bit protection keys. We do this because there is _plenty_ of space in _sigfault and it is possible that future processors would support more than 4 bits of protection keys. The x86 code to actually fill in the siginfo is in the next patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210212.3A9B83AC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:12 +08:00
union {
/* used when si_code=SEGV_BNDERR */
struct {
void __user *_lower;
void __user *_upper;
} _addr_bnd;
/* used when si_code=SEGV_PKUERR */
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field Stephen Rothwell reported this linux-next build failure: http://lkml.kernel.org/r/20160226164406.065a1ffc@canb.auug.org.au ... caused by the Memory Protection Keys patches from the tip tree triggering a newly introduced build-time sanity check on an ARM build, because they changed the ABI of siginfo in an unexpected way. If u64 has a natural alignment of 8 bytes (which is the case on most mainstream platforms, with the notable exception of x86-32), then the leadup to the _sifields union matters: typedef struct siginfo { int si_signo; int si_errno; int si_code; union { ... } _sifields; } __ARCH_SI_ATTRIBUTES siginfo_t; Note how the first 3 fields give us 12 bytes, so _sifields is not 8 naturally bytes aligned. Before the _pkey field addition the largest element of _sifields (on 32-bit platforms) was 32 bits. With the u64 added, the minimum alignment requirement increased to 8 bytes on those (rare) 32-bit platforms. Thus GCC padded the space after si_code with 4 extra bytes, and shifted all _sifields offsets by 4 bytes - breaking the ABI of all of those remaining fields. On 64-bit platforms this problem was hidden due to _sifields already having numerous fields with natural 8 bytes alignment (pointers). To fix this, we replace the u64 with an '__u32'. The __u32 does not increase the minimum alignment requirement of the union, and it is also large enough to store the 16-bit pkey we have today on x86. Reported-by: Stehen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Stehen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave@sr71.net> Cc: Helge Deller <deller@gmx.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-next@vger.kernel.org Fixes: cd0ea35ff551 ("signals, pkeys: Notify userspace about protection key faults") Link: http://lkml.kernel.org/r/20160301125451.02C7426D@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-01 20:54:51 +08:00
__u32 _pkey;
signals, pkeys: Notify userspace about protection key faults A protection key fault is very similar to any other access error. There must be a VMA, etc... We even want to take the same action (SIGSEGV) that we do with a normal access fault. However, we do need to let userspace know that something is different. We do this the same way what we did with SEGV_BNDERR with Memory Protection eXtensions (MPX): define a new SEGV code: SEGV_PKUERR. We add a siginfo field: si_pkey that reveals to userspace which protection key was set on the PTE that we faulted on. There is no other easy way for userspace to figure this out. They could parse smaps but that would be a bit cruel. We share space with in siginfo with _addr_bnd. #BR faults from MPX are completely separate from page faults (#PF) that trigger from protection key violations, so we never need both at the same time. Note that _pkey is a 64-bit value. The current hardware only supports 4-bit protection keys. We do this because there is _plenty_ of space in _sigfault and it is possible that future processors would support more than 4 bits of protection keys. The x86 code to actually fill in the siginfo is in the next patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210212.3A9B83AC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:12 +08:00
};
} _sigfault;
/* SIGPOLL */
struct {
__ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
/* SIGSYS */
struct {
void __user *_call_addr; /* calling user insn */
int _syscall; /* triggering system call number */
unsigned int _arch; /* AUDIT_ARCH_* of syscall */
} _sigsys;
} _sifields;
} __ARCH_SI_ATTRIBUTES siginfo_t;
/* If the arch shares siginfo, then it has SIGSYS. */
#define __ARCH_SIGSYS
#endif
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_tid _sifields._timer._tid
#define si_overrun _sifields._timer._overrun
#define si_sys_private _sifields._timer._sys_private
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#ifdef __ARCH_SI_TRAPNO
#define si_trapno _sifields._sigfault._trapno
#endif
#define si_addr_lsb _sifields._sigfault._addr_lsb
#define si_lower _sifields._sigfault._addr_bnd._lower
#define si_upper _sifields._sigfault._addr_bnd._upper
signals, pkeys: Notify userspace about protection key faults A protection key fault is very similar to any other access error. There must be a VMA, etc... We even want to take the same action (SIGSEGV) that we do with a normal access fault. However, we do need to let userspace know that something is different. We do this the same way what we did with SEGV_BNDERR with Memory Protection eXtensions (MPX): define a new SEGV code: SEGV_PKUERR. We add a siginfo field: si_pkey that reveals to userspace which protection key was set on the PTE that we faulted on. There is no other easy way for userspace to figure this out. They could parse smaps but that would be a bit cruel. We share space with in siginfo with _addr_bnd. #BR faults from MPX are completely separate from page faults (#PF) that trigger from protection key violations, so we never need both at the same time. Note that _pkey is a 64-bit value. The current hardware only supports 4-bit protection keys. We do this because there is _plenty_ of space in _sigfault and it is possible that future processors would support more than 4 bits of protection keys. The x86 code to actually fill in the siginfo is in the next patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210212.3A9B83AC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:12 +08:00
#define si_pkey _sifields._sigfault._pkey
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __ARCH_SIGSYS
#define si_call_addr _sifields._sigsys._call_addr
#define si_syscall _sifields._sigsys._syscall
#define si_arch _sifields._sigsys._arch
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define SI_TIMER -2 /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define ILL_ILLOPC 1 /* illegal opcode */
#define ILL_ILLOPN 2 /* illegal operand */
#define ILL_ILLADR 3 /* illegal addressing mode */
#define ILL_ILLTRP 4 /* illegal trap */
#define ILL_PRVOPC 5 /* privileged opcode */
#define ILL_PRVREG 6 /* privileged register */
#define ILL_COPROC 7 /* coprocessor error */
#define ILL_BADSTK 8 /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define FPE_INTDIV 1 /* integer divide by zero */
#define FPE_INTOVF 2 /* integer overflow */
#define FPE_FLTDIV 3 /* floating point divide by zero */
#define FPE_FLTOVF 4 /* floating point overflow */
#define FPE_FLTUND 5 /* floating point underflow */
#define FPE_FLTRES 6 /* floating point inexact result */
#define FPE_FLTINV 7 /* floating point invalid operation */
#define FPE_FLTSUB 8 /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define SEGV_MAPERR 1 /* address not mapped to object */
#define SEGV_ACCERR 2 /* invalid permissions for mapped object */
#define SEGV_BNDERR 3 /* failed address bound checks */
#define SEGV_PKUERR 4 /* failed protection key checks */
signals, pkeys: Notify userspace about protection key faults A protection key fault is very similar to any other access error. There must be a VMA, etc... We even want to take the same action (SIGSEGV) that we do with a normal access fault. However, we do need to let userspace know that something is different. We do this the same way what we did with SEGV_BNDERR with Memory Protection eXtensions (MPX): define a new SEGV code: SEGV_PKUERR. We add a siginfo field: si_pkey that reveals to userspace which protection key was set on the PTE that we faulted on. There is no other easy way for userspace to figure this out. They could parse smaps but that would be a bit cruel. We share space with in siginfo with _addr_bnd. #BR faults from MPX are completely separate from page faults (#PF) that trigger from protection key violations, so we never need both at the same time. Note that _pkey is a 64-bit value. The current hardware only supports 4-bit protection keys. We do this because there is _plenty_ of space in _sigfault and it is possible that future processors would support more than 4 bits of protection keys. The x86 code to actually fill in the siginfo is in the next patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210212.3A9B83AC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:12 +08:00
#define NSIGSEGV 4
/*
* SIGBUS si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define BUS_ADRALN 1 /* invalid address alignment */
#define BUS_ADRERR 2 /* non-existent physical address */
#define BUS_OBJERR 3 /* object specific hardware error */
/* hardware memory error consumed on a machine check: action required */
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define BUS_MCEERR_AR 4
/* hardware memory error detected in process but not consumed: action optional*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define BUS_MCEERR_AO 5
#define NSIGBUS 5
/*
* SIGTRAP si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define TRAP_BRKPT 1 /* process breakpoint */
#define TRAP_TRACE 2 /* process trace trap */
#define TRAP_BRANCH 3 /* process taken branch trap */
#define TRAP_HWBKPT 4 /* hardware breakpoint/watchpoint */
#define NSIGTRAP 4
/*
* SIGCHLD si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define CLD_EXITED 1 /* child has exited */
#define CLD_KILLED 2 /* child was killed */
#define CLD_DUMPED 3 /* child terminated abnormally */
#define CLD_TRAPPED 4 /* traced child has trapped */
#define CLD_STOPPED 5 /* child has stopped */
#define CLD_CONTINUED 6 /* stopped child has continued */
#define NSIGCHLD 6
/*
fcntl: Don't use ambiguous SIG_POLL si_codes We have a weird and problematic intersection of features that when they all come together result in ambiguous siginfo values, that we can not support properly. - Supporting fcntl(F_SETSIG,...) with arbitrary valid signals. - Using positive values for POLL_IN, POLL_OUT, POLL_MSG, ..., etc that imply they are signal specific si_codes and using the aforementioned arbitrary signal to deliver them. - Supporting injection of arbitrary siginfo values for debugging and checkpoint/restore. The result is that just looking at siginfo si_codes of 1 to 6 are ambigious. It could either be a signal specific si_code or it could be a generic si_code. For most of the kernel this is a non-issue but for sending signals with siginfo it is impossible to play back the kernel signals and get the same result. Strictly speaking when the si_code was changed from SI_SIGIO to POLL_IN and friends between 2.2 and 2.4 this functionality was not ambiguous, as only real time signals were supported. Before 2.4 was released the kernel began supporting siginfo with non realtime signals so they could give details of why the signal was sent. The result is that if F_SETSIG is set to one of the signals with signal specific si_codes then user space can not know why the signal was sent. I grepped through a bunch of userspace programs using debian code search to get a feel for how often people choose a signal that results in an ambiguous si_code. I only found one program doing so and it was using SIGCHLD to test the F_SETSIG functionality, and did not appear to be a real world usage. Therefore the ambiguity does not appears to be a real world problem in practice. Remove the ambiguity while introducing the smallest chance of breakage by changing the si_code to SI_SIGIO when signals with signal specific si_codes are targeted. Fixes: v2.3.40 -- Added support for queueing non-rt signals Fixes: v2.3.21 -- Changed the si_code from SI_SIGIO Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-29 22:28:50 +08:00
* SIGPOLL (or any other signal without signal specific si_codes) si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define POLL_IN 1 /* data input available */
#define POLL_OUT 2 /* output buffers available */
#define POLL_MSG 3 /* input message available */
#define POLL_ERR 4 /* i/o error */
#define POLL_PRI 5 /* high priority input available */
#define POLL_HUP 6 /* device disconnected */
#define NSIGPOLL 6
/*
* SIGSYS si_codes
*/
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
#define SYS_SECCOMP 1 /* seccomp triggered */
#define NSIGSYS 1
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_THREAD_ID 4 /* deliver to thread */
/*
* This works because the alignment is ok on all current architectures
* but we leave open this being overridden in the future
*/
#ifndef __ARCH_SIGEV_PREAMBLE_SIZE
#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(int) * 2 + sizeof(sigval_t))
#endif
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE - __ARCH_SIGEV_PREAMBLE_SIZE) \
/ sizeof(int))
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
int _tid;
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#define sigev_notify_thread_id _sigev_un._tid
#endif /* _UAPI_ASM_GENERIC_SIGINFO_H */