2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 16:53:54 +08:00
linux-next/drivers/xen/pci.c

333 lines
7.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2009, Intel Corporation.
*
* Author: Weidong Han <weidong.han@intel.com>
*/
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
xen-pciback: allow compiling on other archs than x86 Xen-pciback driver was designed to be built for x86 only. But it can also be used by other architectures, e.g. Arm. Currently PCI backend implements multiple functionalities at a time, such as: 1. It is used as a database for assignable PCI devices, e.g. xl pci-assignable-{add|remove|list} manipulates that list. So, whenever the toolstack needs to know which PCI devices can be passed through it reads that from the relevant sysfs entries of the pciback. 2. It is used to hold the unbound PCI devices list, e.g. when passing through a PCI device it needs to be unbound from the relevant device driver and bound to pciback (strictly speaking it is not required that the device is bound to pciback, but pciback is again used as a database of the passed through PCI devices, so we can re-bind the devices back to their original drivers when guest domain shuts down) 3. Device reset for the devices being passed through 4. Para-virtualised use-cases support The para-virtualised part of the driver is not always needed as some architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend model for PCI device passthrough. For such use-cases make the very first step in splitting the xen-pciback driver into two parts: Xen PCI stub and PCI PV backend drivers. For that add new configuration options CONFIG_XEN_PCI_STUB and CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its functionality, e.g. no support for para-virtualised scenario. x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the fully featured backend driver. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-10-28 22:36:20 +08:00
#include <xen/pci.h>
#include <xen/xen.h>
#include <xen/interface/physdev.h>
#include <xen/interface/xen.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
#include "../pci/pci.h"
#ifdef CONFIG_PCI_MMCONFIG
#include <asm/pci_x86.h>
static int xen_mcfg_late(void);
#endif
static bool __read_mostly pci_seg_supported = true;
static int xen_add_device(struct device *dev)
{
int r;
struct pci_dev *pci_dev = to_pci_dev(dev);
#ifdef CONFIG_PCI_IOV
struct pci_dev *physfn = pci_dev->physfn;
#endif
#ifdef CONFIG_PCI_MMCONFIG
static bool pci_mcfg_reserved = false;
/*
* Reserve MCFG areas in Xen on first invocation due to this being
* potentially called from inside of acpi_init immediately after
* MCFG table has been finally parsed.
*/
if (!pci_mcfg_reserved) {
xen_mcfg_late();
pci_mcfg_reserved = true;
}
#endif
if (pci_seg_supported) {
struct {
struct physdev_pci_device_add add;
uint32_t pxm;
} add_ext = {
.add.seg = pci_domain_nr(pci_dev->bus),
.add.bus = pci_dev->bus->number,
.add.devfn = pci_dev->devfn
};
struct physdev_pci_device_add *add = &add_ext.add;
#ifdef CONFIG_ACPI
acpi_handle handle;
#endif
#ifdef CONFIG_PCI_IOV
if (pci_dev->is_virtfn) {
add->flags = XEN_PCI_DEV_VIRTFN;
add->physfn.bus = physfn->bus->number;
add->physfn.devfn = physfn->devfn;
} else
#endif
if (pci_ari_enabled(pci_dev->bus) && PCI_SLOT(pci_dev->devfn))
add->flags = XEN_PCI_DEV_EXTFN;
#ifdef CONFIG_ACPI
handle = ACPI_HANDLE(&pci_dev->dev);
#ifdef CONFIG_PCI_IOV
if (!handle && pci_dev->is_virtfn)
handle = ACPI_HANDLE(physfn->bus->bridge);
#endif
if (!handle) {
/*
* This device was not listed in the ACPI name space at
* all. Try to get acpi handle of parent pci bus.
*/
struct pci_bus *pbus;
for (pbus = pci_dev->bus; pbus; pbus = pbus->parent) {
handle = acpi_pci_get_bridge_handle(pbus);
if (handle)
break;
}
}
if (handle) {
acpi_status status;
do {
unsigned long long pxm;
status = acpi_evaluate_integer(handle, "_PXM",
NULL, &pxm);
if (ACPI_SUCCESS(status)) {
add->optarr[0] = pxm;
add->flags |= XEN_PCI_DEV_PXM;
break;
}
status = acpi_get_parent(handle, &handle);
} while (ACPI_SUCCESS(status));
}
#endif /* CONFIG_ACPI */
r = HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_add, add);
if (r != -ENOSYS)
return r;
pci_seg_supported = false;
}
if (pci_domain_nr(pci_dev->bus))
r = -ENOSYS;
#ifdef CONFIG_PCI_IOV
else if (pci_dev->is_virtfn) {
struct physdev_manage_pci_ext manage_pci_ext = {
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn,
.is_virtfn = 1,
.physfn.bus = physfn->bus->number,
.physfn.devfn = physfn->devfn,
};
r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_add_ext,
&manage_pci_ext);
}
#endif
else if (pci_ari_enabled(pci_dev->bus) && PCI_SLOT(pci_dev->devfn)) {
struct physdev_manage_pci_ext manage_pci_ext = {
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn,
.is_extfn = 1,
};
r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_add_ext,
&manage_pci_ext);
} else {
struct physdev_manage_pci manage_pci = {
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn,
};
r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_add,
&manage_pci);
}
return r;
}
static int xen_remove_device(struct device *dev)
{
int r;
struct pci_dev *pci_dev = to_pci_dev(dev);
if (pci_seg_supported) {
struct physdev_pci_device device = {
.seg = pci_domain_nr(pci_dev->bus),
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn
};
r = HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_remove,
&device);
} else if (pci_domain_nr(pci_dev->bus))
r = -ENOSYS;
else {
struct physdev_manage_pci manage_pci = {
.bus = pci_dev->bus->number,
.devfn = pci_dev->devfn
};
r = HYPERVISOR_physdev_op(PHYSDEVOP_manage_pci_remove,
&manage_pci);
}
return r;
}
static int xen_pci_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
int r = 0;
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
r = xen_add_device(dev);
break;
case BUS_NOTIFY_DEL_DEVICE:
r = xen_remove_device(dev);
break;
default:
return NOTIFY_DONE;
}
if (r)
dev_err(dev, "Failed to %s - passthrough or MSI/MSI-X might fail!\n",
action == BUS_NOTIFY_ADD_DEVICE ? "add" :
(action == BUS_NOTIFY_DEL_DEVICE ? "delete" : "?"));
return NOTIFY_OK;
}
static struct notifier_block device_nb = {
.notifier_call = xen_pci_notifier,
};
static int __init register_xen_pci_notifier(void)
{
if (!xen_initial_domain())
return 0;
return bus_register_notifier(&pci_bus_type, &device_nb);
}
arch_initcall(register_xen_pci_notifier);
#ifdef CONFIG_PCI_MMCONFIG
static int xen_mcfg_late(void)
{
struct pci_mmcfg_region *cfg;
int rc;
if (!xen_initial_domain())
return 0;
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return 0;
if (list_empty(&pci_mmcfg_list))
return 0;
/* Check whether they are in the right area. */
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
struct physdev_pci_mmcfg_reserved r;
r.address = cfg->address;
r.segment = cfg->segment;
r.start_bus = cfg->start_bus;
r.end_bus = cfg->end_bus;
r.flags = XEN_PCI_MMCFG_RESERVED;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_pci_mmcfg_reserved, &r);
switch (rc) {
case 0:
case -ENOSYS:
continue;
default:
pr_warn("Failed to report MMCONFIG reservation"
" state for %s to hypervisor"
" (%d)\n",
cfg->name, rc);
}
}
return 0;
}
#endif
xen-pciback: allow compiling on other archs than x86 Xen-pciback driver was designed to be built for x86 only. But it can also be used by other architectures, e.g. Arm. Currently PCI backend implements multiple functionalities at a time, such as: 1. It is used as a database for assignable PCI devices, e.g. xl pci-assignable-{add|remove|list} manipulates that list. So, whenever the toolstack needs to know which PCI devices can be passed through it reads that from the relevant sysfs entries of the pciback. 2. It is used to hold the unbound PCI devices list, e.g. when passing through a PCI device it needs to be unbound from the relevant device driver and bound to pciback (strictly speaking it is not required that the device is bound to pciback, but pciback is again used as a database of the passed through PCI devices, so we can re-bind the devices back to their original drivers when guest domain shuts down) 3. Device reset for the devices being passed through 4. Para-virtualised use-cases support The para-virtualised part of the driver is not always needed as some architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend model for PCI device passthrough. For such use-cases make the very first step in splitting the xen-pciback driver into two parts: Xen PCI stub and PCI PV backend drivers. For that add new configuration options CONFIG_XEN_PCI_STUB and CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its functionality, e.g. no support for para-virtualised scenario. x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the fully featured backend driver. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-10-28 22:36:20 +08:00
#ifdef CONFIG_XEN_DOM0
struct xen_device_domain_owner {
domid_t domain;
struct pci_dev *dev;
struct list_head list;
};
static DEFINE_SPINLOCK(dev_domain_list_spinlock);
static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
list_for_each_entry(owner, &dev_domain_list, list) {
if (owner->dev == dev)
return owner;
}
return NULL;
}
int xen_find_device_domain_owner(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
int domain = -ENODEV;
spin_lock(&dev_domain_list_spinlock);
owner = find_device(dev);
if (owner)
domain = owner->domain;
spin_unlock(&dev_domain_list_spinlock);
return domain;
}
EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
{
struct xen_device_domain_owner *owner;
owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
if (!owner)
return -ENODEV;
spin_lock(&dev_domain_list_spinlock);
if (find_device(dev)) {
spin_unlock(&dev_domain_list_spinlock);
kfree(owner);
return -EEXIST;
}
owner->domain = domain;
owner->dev = dev;
list_add_tail(&owner->list, &dev_domain_list);
spin_unlock(&dev_domain_list_spinlock);
return 0;
}
EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
int xen_unregister_device_domain_owner(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
spin_lock(&dev_domain_list_spinlock);
owner = find_device(dev);
if (!owner) {
spin_unlock(&dev_domain_list_spinlock);
return -ENODEV;
}
list_del(&owner->list);
spin_unlock(&dev_domain_list_spinlock);
kfree(owner);
return 0;
}
EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
#endif