2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/drivers/media/media-device.c

720 lines
17 KiB
C
Raw Normal View History

/*
* Media device
*
* Copyright (C) 2010 Nokia Corporation
*
* Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* Sakari Ailus <sakari.ailus@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/compat.h>
#include <linux/export.h>
#include <linux/ioctl.h>
#include <linux/media.h>
[media] media: convert links from array to list The entire logic that represent graph links were developed on a time where there were no needs to dynamic remove links. So, although links are created/removed one by one via some functions, they're stored as an array inside the entity struct. As the array may grow, there's a logic inside the code that checks if the amount of space is not enough to store the needed links. If it isn't the core uses krealloc() to change the size of the link, with is bad, as it leaves the memory fragmented. So, convert links into a list. Also, currently, both source and sink entities need the link at the graph traversal logic inside media_entity. So there's a logic duplicating all links. That makes it to spend twice the memory needed. This is not a big deal for today's usage, where the number of links are not big. Yet, if during the MC workshop discussions, it was said that IIO graphs could have up to 4,000 entities. So, we may want to remove the duplication on some future. The problem is that it would require a separate linked list to store the backlinks inside the entity, or to use a more complex algorithm to do graph backlink traversal, with is something that the current graph traversal inside the core can't cope with. So, let's postpone a such change if/when it is actually needed. It should also be noticed that the media_link structure uses 44 bytes on 32-bit architectures and 84 bytes on 64-bit architecture. It will thus be allocated out of the 64-bytes and 96-bytes pools respectively. That's a 12.5% memory waste on 64-bit architectures and 31.25% on 32-bit architecture. A linked list is less efficient than an array in this case, but this could later be optimized if we can get rid of the reverse links (with would reduce memory allocation by 50%). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-07 17:55:40 +08:00
#include <linux/slab.h>
#include <linux/types.h>
#include <media/media-device.h>
#include <media/media-devnode.h>
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
#include <media/media-entity.h>
#ifdef CONFIG_MEDIA_CONTROLLER
/* -----------------------------------------------------------------------------
* Userspace API
*/
static int media_device_open(struct file *filp)
{
return 0;
}
static int media_device_close(struct file *filp)
{
return 0;
}
static int media_device_get_info(struct media_device *dev,
struct media_device_info __user *__info)
{
struct media_device_info info;
memset(&info, 0, sizeof(info));
strlcpy(info.driver, dev->dev->driver->name, sizeof(info.driver));
strlcpy(info.model, dev->model, sizeof(info.model));
strlcpy(info.serial, dev->serial, sizeof(info.serial));
strlcpy(info.bus_info, dev->bus_info, sizeof(info.bus_info));
info.media_version = MEDIA_API_VERSION;
info.hw_revision = dev->hw_revision;
info.driver_version = dev->driver_version;
if (copy_to_user(__info, &info, sizeof(*__info)))
return -EFAULT;
return 0;
}
static struct media_entity *find_entity(struct media_device *mdev, u32 id)
{
struct media_entity *entity;
int next = id & MEDIA_ENT_ID_FLAG_NEXT;
id &= ~MEDIA_ENT_ID_FLAG_NEXT;
spin_lock(&mdev->lock);
media_device_for_each_entity(entity, mdev) {
if (((media_entity_id(entity) == id) && !next) ||
((media_entity_id(entity) > id) && next)) {
spin_unlock(&mdev->lock);
return entity;
}
}
spin_unlock(&mdev->lock);
return NULL;
}
static long media_device_enum_entities(struct media_device *mdev,
struct media_entity_desc __user *uent)
{
struct media_entity *ent;
struct media_entity_desc u_ent;
memset(&u_ent, 0, sizeof(u_ent));
if (copy_from_user(&u_ent.id, &uent->id, sizeof(u_ent.id)))
return -EFAULT;
ent = find_entity(mdev, u_ent.id);
if (ent == NULL)
return -EINVAL;
u_ent.id = media_entity_id(ent);
if (ent->name)
strlcpy(u_ent.name, ent->name, sizeof(u_ent.name));
u_ent.type = ent->function;
u_ent.revision = ent->revision;
u_ent.flags = ent->flags;
u_ent.group_id = ent->group_id;
u_ent.pads = ent->num_pads;
u_ent.links = ent->num_links - ent->num_backlinks;
memcpy(&u_ent.raw, &ent->info, sizeof(ent->info));
if (copy_to_user(uent, &u_ent, sizeof(u_ent)))
return -EFAULT;
return 0;
}
static void media_device_kpad_to_upad(const struct media_pad *kpad,
struct media_pad_desc *upad)
{
upad->entity = media_entity_id(kpad->entity);
upad->index = kpad->index;
upad->flags = kpad->flags;
}
static long __media_device_enum_links(struct media_device *mdev,
struct media_links_enum *links)
{
struct media_entity *entity;
entity = find_entity(mdev, links->entity);
if (entity == NULL)
return -EINVAL;
if (links->pads) {
unsigned int p;
for (p = 0; p < entity->num_pads; p++) {
struct media_pad_desc pad;
memset(&pad, 0, sizeof(pad));
media_device_kpad_to_upad(&entity->pads[p], &pad);
if (copy_to_user(&links->pads[p], &pad, sizeof(pad)))
return -EFAULT;
}
}
if (links->links) {
struct media_link *link;
struct media_link_desc __user *ulink_desc = links->links;
list_for_each_entry(link, &entity->links, list) {
struct media_link_desc klink_desc;
/* Ignore backlinks. */
if (link->source->entity != entity)
continue;
memset(&klink_desc, 0, sizeof(klink_desc));
media_device_kpad_to_upad(link->source,
&klink_desc.source);
media_device_kpad_to_upad(link->sink,
&klink_desc.sink);
klink_desc.flags = link->flags;
if (copy_to_user(ulink_desc, &klink_desc,
sizeof(*ulink_desc)))
return -EFAULT;
ulink_desc++;
}
}
return 0;
}
static long media_device_enum_links(struct media_device *mdev,
struct media_links_enum __user *ulinks)
{
struct media_links_enum links;
int rval;
if (copy_from_user(&links, ulinks, sizeof(links)))
return -EFAULT;
rval = __media_device_enum_links(mdev, &links);
if (rval < 0)
return rval;
if (copy_to_user(ulinks, &links, sizeof(*ulinks)))
return -EFAULT;
return 0;
}
static long media_device_setup_link(struct media_device *mdev,
struct media_link_desc __user *_ulink)
{
struct media_link *link = NULL;
struct media_link_desc ulink;
struct media_entity *source;
struct media_entity *sink;
int ret;
if (copy_from_user(&ulink, _ulink, sizeof(ulink)))
return -EFAULT;
/* Find the source and sink entities and link.
*/
source = find_entity(mdev, ulink.source.entity);
sink = find_entity(mdev, ulink.sink.entity);
if (source == NULL || sink == NULL)
return -EINVAL;
if (ulink.source.index >= source->num_pads ||
ulink.sink.index >= sink->num_pads)
return -EINVAL;
link = media_entity_find_link(&source->pads[ulink.source.index],
&sink->pads[ulink.sink.index]);
if (link == NULL)
return -EINVAL;
/* Setup the link on both entities. */
ret = __media_entity_setup_link(link, ulink.flags);
if (copy_to_user(_ulink, &ulink, sizeof(ulink)))
return -EFAULT;
return ret;
}
static long __media_device_get_topology(struct media_device *mdev,
struct media_v2_topology *topo)
{
struct media_entity *entity;
struct media_interface *intf;
struct media_pad *pad;
struct media_link *link;
struct media_v2_entity uentity;
struct media_v2_interface uintf;
struct media_v2_pad upad;
struct media_v2_link ulink;
unsigned int i;
int ret = 0;
topo->topology_version = mdev->topology_version;
/* Get entities and number of entities */
i = 0;
media_device_for_each_entity(entity, mdev) {
i++;
if (ret || !topo->entities)
continue;
if (i > topo->num_entities) {
ret = -ENOSPC;
continue;
}
/* Copy fields to userspace struct if not error */
memset(&uentity, 0, sizeof(uentity));
uentity.id = entity->graph_obj.id;
uentity.function = entity->function;
strncpy(uentity.name, entity->name,
sizeof(uentity.name));
if (copy_to_user(&topo->entities[i - 1], &uentity, sizeof(uentity)))
ret = -EFAULT;
}
topo->num_entities = i;
/* Get interfaces and number of interfaces */
i = 0;
media_device_for_each_intf(intf, mdev) {
i++;
if (ret || !topo->interfaces)
continue;
if (i > topo->num_interfaces) {
ret = -ENOSPC;
continue;
}
memset(&uintf, 0, sizeof(uintf));
/* Copy intf fields to userspace struct */
uintf.id = intf->graph_obj.id;
uintf.intf_type = intf->type;
uintf.flags = intf->flags;
if (media_type(&intf->graph_obj) == MEDIA_GRAPH_INTF_DEVNODE) {
struct media_intf_devnode *devnode;
devnode = intf_to_devnode(intf);
uintf.devnode.major = devnode->major;
uintf.devnode.minor = devnode->minor;
}
if (copy_to_user(&topo->interfaces[i - 1], &uintf, sizeof(uintf)))
ret = -EFAULT;
}
topo->num_interfaces = i;
/* Get pads and number of pads */
i = 0;
media_device_for_each_pad(pad, mdev) {
i++;
if (ret || !topo->pads)
continue;
if (i > topo->num_pads) {
ret = -ENOSPC;
continue;
}
memset(&upad, 0, sizeof(upad));
/* Copy pad fields to userspace struct */
upad.id = pad->graph_obj.id;
upad.entity_id = pad->entity->graph_obj.id;
upad.flags = pad->flags;
if (copy_to_user(&topo->pads[i - 1], &upad, sizeof(upad)))
ret = -EFAULT;
}
topo->num_pads = i;
/* Get links and number of links */
i = 0;
media_device_for_each_link(link, mdev) {
if (link->is_backlink)
continue;
i++;
if (ret || !topo->links)
continue;
if (i > topo->num_links) {
ret = -ENOSPC;
continue;
}
memset(&ulink, 0, sizeof(ulink));
/* Copy link fields to userspace struct */
ulink.id = link->graph_obj.id;
ulink.source_id = link->gobj0->id;
ulink.sink_id = link->gobj1->id;
ulink.flags = link->flags;
if (media_type(link->gobj0) != MEDIA_GRAPH_PAD)
ulink.flags |= MEDIA_LNK_FL_INTERFACE_LINK;
if (copy_to_user(&topo->links[i - 1], &ulink, sizeof(ulink)))
ret = -EFAULT;
}
topo->num_links = i;
return ret;
}
static long media_device_get_topology(struct media_device *mdev,
struct media_v2_topology __user *utopo)
{
struct media_v2_topology ktopo;
int ret;
ret = copy_from_user(&ktopo, utopo, sizeof(ktopo));
if (ret < 0)
return ret;
ret = __media_device_get_topology(mdev, &ktopo);
if (ret < 0)
return ret;
ret = copy_to_user(utopo, &ktopo, sizeof(*utopo));
return ret;
}
static long media_device_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct media_devnode *devnode = media_devnode_data(filp);
struct media_device *dev = to_media_device(devnode);
long ret;
switch (cmd) {
case MEDIA_IOC_DEVICE_INFO:
ret = media_device_get_info(dev,
(struct media_device_info __user *)arg);
break;
case MEDIA_IOC_ENUM_ENTITIES:
ret = media_device_enum_entities(dev,
(struct media_entity_desc __user *)arg);
break;
case MEDIA_IOC_ENUM_LINKS:
mutex_lock(&dev->graph_mutex);
ret = media_device_enum_links(dev,
(struct media_links_enum __user *)arg);
mutex_unlock(&dev->graph_mutex);
break;
case MEDIA_IOC_SETUP_LINK:
mutex_lock(&dev->graph_mutex);
ret = media_device_setup_link(dev,
(struct media_link_desc __user *)arg);
mutex_unlock(&dev->graph_mutex);
break;
case MEDIA_IOC_G_TOPOLOGY:
mutex_lock(&dev->graph_mutex);
ret = media_device_get_topology(dev,
(struct media_v2_topology __user *)arg);
mutex_unlock(&dev->graph_mutex);
break;
default:
ret = -ENOIOCTLCMD;
}
return ret;
}
#ifdef CONFIG_COMPAT
struct media_links_enum32 {
__u32 entity;
compat_uptr_t pads; /* struct media_pad_desc * */
compat_uptr_t links; /* struct media_link_desc * */
__u32 reserved[4];
};
static long media_device_enum_links32(struct media_device *mdev,
struct media_links_enum32 __user *ulinks)
{
struct media_links_enum links;
compat_uptr_t pads_ptr, links_ptr;
memset(&links, 0, sizeof(links));
if (get_user(links.entity, &ulinks->entity)
|| get_user(pads_ptr, &ulinks->pads)
|| get_user(links_ptr, &ulinks->links))
return -EFAULT;
links.pads = compat_ptr(pads_ptr);
links.links = compat_ptr(links_ptr);
return __media_device_enum_links(mdev, &links);
}
#define MEDIA_IOC_ENUM_LINKS32 _IOWR('|', 0x02, struct media_links_enum32)
static long media_device_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct media_devnode *devnode = media_devnode_data(filp);
struct media_device *dev = to_media_device(devnode);
long ret;
switch (cmd) {
case MEDIA_IOC_DEVICE_INFO:
case MEDIA_IOC_ENUM_ENTITIES:
case MEDIA_IOC_SETUP_LINK:
case MEDIA_IOC_G_TOPOLOGY:
return media_device_ioctl(filp, cmd, arg);
case MEDIA_IOC_ENUM_LINKS32:
mutex_lock(&dev->graph_mutex);
ret = media_device_enum_links32(dev,
(struct media_links_enum32 __user *)arg);
mutex_unlock(&dev->graph_mutex);
break;
default:
ret = -ENOIOCTLCMD;
}
return ret;
}
#endif /* CONFIG_COMPAT */
static const struct media_file_operations media_device_fops = {
.owner = THIS_MODULE,
.open = media_device_open,
.ioctl = media_device_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = media_device_compat_ioctl,
#endif /* CONFIG_COMPAT */
.release = media_device_close,
};
/* -----------------------------------------------------------------------------
* sysfs
*/
static ssize_t show_model(struct device *cd,
struct device_attribute *attr, char *buf)
{
struct media_device *mdev = to_media_device(to_media_devnode(cd));
return sprintf(buf, "%.*s\n", (int)sizeof(mdev->model), mdev->model);
}
static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
/* -----------------------------------------------------------------------------
* Registration/unregistration
*/
static void media_device_release(struct media_devnode *mdev)
{
dev_dbg(mdev->parent, "Media device released\n");
}
/**
* media_device_register - register a media device
* @mdev: The media device
*
* The caller is responsible for initializing the media device before
* registration. The following fields must be set:
*
* - dev must point to the parent device
* - model must be filled with the device model name
*/
int __must_check __media_device_register(struct media_device *mdev,
struct module *owner)
{
int ret;
if (WARN_ON(mdev->dev == NULL || mdev->model[0] == 0))
return -EINVAL;
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
INIT_LIST_HEAD(&mdev->entities);
INIT_LIST_HEAD(&mdev->interfaces);
INIT_LIST_HEAD(&mdev->pads);
INIT_LIST_HEAD(&mdev->links);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
spin_lock_init(&mdev->lock);
mutex_init(&mdev->graph_mutex);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
/* Register the device node. */
mdev->devnode.fops = &media_device_fops;
mdev->devnode.parent = mdev->dev;
mdev->devnode.release = media_device_release;
ret = media_devnode_register(&mdev->devnode, owner);
if (ret < 0)
return ret;
ret = device_create_file(&mdev->devnode.dev, &dev_attr_model);
if (ret < 0) {
media_devnode_unregister(&mdev->devnode);
return ret;
}
dev_dbg(mdev->dev, "Media device registered\n");
return 0;
}
EXPORT_SYMBOL_GPL(__media_device_register);
/**
* media_device_unregister - unregister a media device
* @mdev: The media device
*
*/
void media_device_unregister(struct media_device *mdev)
{
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
struct media_entity *entity;
struct media_entity *next;
struct media_interface *intf, *tmp_intf;
/* Remove all entities from the media device */
list_for_each_entry_safe(entity, next, &mdev->entities, graph_obj.list)
media_device_unregister_entity(entity);
/* Remove all interfaces from the media device */
spin_lock(&mdev->lock);
list_for_each_entry_safe(intf, tmp_intf, &mdev->interfaces,
graph_obj.list) {
__media_remove_intf_links(intf);
media_gobj_remove(&intf->graph_obj);
kfree(intf);
}
spin_unlock(&mdev->lock);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
device_remove_file(&mdev->devnode.dev, &dev_attr_model);
media_devnode_unregister(&mdev->devnode);
dev_dbg(mdev->dev, "Media device unregistered\n");
}
EXPORT_SYMBOL_GPL(media_device_unregister);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
/**
* media_device_register_entity - Register an entity with a media device
* @mdev: The media device
* @entity: The entity
*/
int __must_check media_device_register_entity(struct media_device *mdev,
struct media_entity *entity)
{
unsigned int i;
[media] uapi/media.h: Rename entities types to functions Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-11 03:25:41 +08:00
if (entity->function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN ||
entity->function == MEDIA_ENT_F_UNKNOWN)
dev_warn(mdev->dev,
"Entity type for entity %s was not initialized!\n",
entity->name);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
/* Warn if we apparently re-register an entity */
WARN_ON(entity->graph_obj.mdev != NULL);
entity->graph_obj.mdev = mdev;
[media] media: convert links from array to list The entire logic that represent graph links were developed on a time where there were no needs to dynamic remove links. So, although links are created/removed one by one via some functions, they're stored as an array inside the entity struct. As the array may grow, there's a logic inside the code that checks if the amount of space is not enough to store the needed links. If it isn't the core uses krealloc() to change the size of the link, with is bad, as it leaves the memory fragmented. So, convert links into a list. Also, currently, both source and sink entities need the link at the graph traversal logic inside media_entity. So there's a logic duplicating all links. That makes it to spend twice the memory needed. This is not a big deal for today's usage, where the number of links are not big. Yet, if during the MC workshop discussions, it was said that IIO graphs could have up to 4,000 entities. So, we may want to remove the duplication on some future. The problem is that it would require a separate linked list to store the backlinks inside the entity, or to use a more complex algorithm to do graph backlink traversal, with is something that the current graph traversal inside the core can't cope with. So, let's postpone a such change if/when it is actually needed. It should also be noticed that the media_link structure uses 44 bytes on 32-bit architectures and 84 bytes on 64-bit architecture. It will thus be allocated out of the 64-bytes and 96-bytes pools respectively. That's a 12.5% memory waste on 64-bit architectures and 31.25% on 32-bit architecture. A linked list is less efficient than an array in this case, but this could later be optimized if we can get rid of the reverse links (with would reduce memory allocation by 50%). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-07 17:55:40 +08:00
INIT_LIST_HEAD(&entity->links);
entity->num_links = 0;
entity->num_backlinks = 0;
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
spin_lock(&mdev->lock);
/* Initialize media_gobj embedded at the entity */
media_gobj_init(mdev, MEDIA_GRAPH_ENTITY, &entity->graph_obj);
/* Initialize objects at the pads */
for (i = 0; i < entity->num_pads; i++)
media_gobj_init(mdev, MEDIA_GRAPH_PAD,
&entity->pads[i].graph_obj);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
spin_unlock(&mdev->lock);
return 0;
}
EXPORT_SYMBOL_GPL(media_device_register_entity);
/**
* media_device_unregister_entity - Unregister an entity
* @entity: The entity
*
* If the entity has never been registered this function will return
* immediately.
*/
void media_device_unregister_entity(struct media_entity *entity)
{
struct media_device *mdev = entity->graph_obj.mdev;
[media] media: convert links from array to list The entire logic that represent graph links were developed on a time where there were no needs to dynamic remove links. So, although links are created/removed one by one via some functions, they're stored as an array inside the entity struct. As the array may grow, there's a logic inside the code that checks if the amount of space is not enough to store the needed links. If it isn't the core uses krealloc() to change the size of the link, with is bad, as it leaves the memory fragmented. So, convert links into a list. Also, currently, both source and sink entities need the link at the graph traversal logic inside media_entity. So there's a logic duplicating all links. That makes it to spend twice the memory needed. This is not a big deal for today's usage, where the number of links are not big. Yet, if during the MC workshop discussions, it was said that IIO graphs could have up to 4,000 entities. So, we may want to remove the duplication on some future. The problem is that it would require a separate linked list to store the backlinks inside the entity, or to use a more complex algorithm to do graph backlink traversal, with is something that the current graph traversal inside the core can't cope with. So, let's postpone a such change if/when it is actually needed. It should also be noticed that the media_link structure uses 44 bytes on 32-bit architectures and 84 bytes on 64-bit architecture. It will thus be allocated out of the 64-bytes and 96-bytes pools respectively. That's a 12.5% memory waste on 64-bit architectures and 31.25% on 32-bit architecture. A linked list is less efficient than an array in this case, but this could later be optimized if we can get rid of the reverse links (with would reduce memory allocation by 50%). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-07 17:55:40 +08:00
struct media_link *link, *tmp;
struct media_interface *intf;
unsigned int i;
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
if (mdev == NULL)
return;
spin_lock(&mdev->lock);
/* Remove all interface links pointing to this entity */
list_for_each_entry(intf, &mdev->interfaces, graph_obj.list) {
list_for_each_entry_safe(link, tmp, &intf->links, list) {
if (link->entity == entity)
__media_remove_intf_link(link);
}
}
/* Remove all data links that belong to this entity */
__media_entity_remove_links(entity);
/* Remove all pads that belong to this entity */
for (i = 0; i < entity->num_pads; i++)
media_gobj_remove(&entity->pads[i].graph_obj);
/* Remove the entity */
media_gobj_remove(&entity->graph_obj);
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
spin_unlock(&mdev->lock);
entity->graph_obj.mdev = NULL;
[media] media: Entities, pads and links As video hardware pipelines become increasingly complex and configurable, the current hardware description through v4l2 subdevices reaches its limits. In addition to enumerating and configuring subdevices, video camera drivers need a way to discover and modify at runtime how those subdevices are connected. This is done through new elements called entities, pads and links. An entity is a basic media hardware building block. It can correspond to a large variety of logical blocks such as physical hardware devices (CMOS sensor for instance), logical hardware devices (a building block in a System-on-Chip image processing pipeline), DMA channels or physical connectors. A pad is a connection endpoint through which an entity can interact with other entities. Data (not restricted to video) produced by an entity flows from the entity's output to one or more entity inputs. Pads should not be confused with physical pins at chip boundaries. A link is a point-to-point oriented connection between two pads, either on the same entity or on different entities. Data flows from a source pad to a sink pad. Links are stored in the source entity. To make backwards graph walk faster, a copy of all links is also stored in the sink entity. The copy is known as a backlink and is only used to help graph traversal. The entity API is made of three functions: - media_entity_init() initializes an entity. The caller must provide an array of pads as well as an estimated number of links. The links array is allocated dynamically and will be reallocated if it grows beyond the initial estimate. - media_entity_cleanup() frees resources allocated for an entity. It must be called during the cleanup phase after unregistering the entity and before freeing it. - media_entity_create_link() creates a link between two entities. An entry in the link array of each entity is allocated and stores pointers to source and sink pads. When a media device is unregistered, all its entities are unregistered automatically. The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 19:40:00 +08:00
}
EXPORT_SYMBOL_GPL(media_device_unregister_entity);
static void media_device_release_devres(struct device *dev, void *res)
{
}
/*
* media_device_get_devres() - get media device as device resource
* creates if one doesn't exist
*/
struct media_device *media_device_get_devres(struct device *dev)
{
struct media_device *mdev;
mdev = devres_find(dev, media_device_release_devres, NULL, NULL);
if (mdev)
return mdev;
mdev = devres_alloc(media_device_release_devres,
sizeof(struct media_device), GFP_KERNEL);
if (!mdev)
return NULL;
return devres_get(dev, mdev, NULL, NULL);
}
EXPORT_SYMBOL_GPL(media_device_get_devres);
/*
* media_device_find_devres() - find media device as device resource
*/
struct media_device *media_device_find_devres(struct device *dev)
{
return devres_find(dev, media_device_release_devres, NULL, NULL);
}
EXPORT_SYMBOL_GPL(media_device_find_devres);
#endif /* CONFIG_MEDIA_CONTROLLER */