renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
Code
a697e05116
linux-next/arch/s390/kernel/signal.c

580 lines
17 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 17:15:04 +08:00
* Copyright IBM Corp. 1999, 2006
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
*
* Based on Intel version
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-11 03:33:20 +08:00
#include <linux/tracehook.h>
[CVE-2009-0029] s390 specific system call wrappers Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 21:14:36 +08:00
#include <linux/syscalls.h>
[S390] implement is_compat_task Implement is_compat_task and use it all over the place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12 16:26:25 +08:00
#include <linux/compat.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
Disintegrate asm/system.h for S390 Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
2012-03-29 01:30:02 +08:00
#include <asm/switch_to.h>
[S390] Fix a lot of sparse warnings. Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:46:26 +08:00
#include "entry.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/*
* Layout of an old-style signal-frame:
* -----------------------------------------
* | save area (_SIGNAL_FRAMESIZE) |
* -----------------------------------------
* | struct sigcontext |
* | oldmask |
* | _sigregs * |
* -----------------------------------------
* | _sigregs with |
* | _s390_regs_common |
* | _s390_fp_regs |
* -----------------------------------------
* | int signo |
* -----------------------------------------
* | _sigregs_ext with |
* | gprs_high 64 byte (opt) |
* | vxrs_low 128 byte (opt) |
* | vxrs_high 256 byte (opt) |
* | reserved 128 byte (opt) |
* -----------------------------------------
* | __u16 svc_insn |
* -----------------------------------------
* The svc_insn entry with the sigreturn system call opcode does not
* have a fixed position and moves if gprs_high or vxrs exist.
* Future extensions will be added to _sigregs_ext.
*/
struct sigframe
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE];
struct sigcontext sc;
_sigregs sregs;
int signo;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
_sigregs_ext sregs_ext;
__u16 svc_insn; /* Offset of svc_insn is NOT fixed! */
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/*
* Layout of an rt signal-frame:
* -----------------------------------------
* | save area (_SIGNAL_FRAMESIZE) |
* -----------------------------------------
* | svc __NR_rt_sigreturn 2 byte |
* -----------------------------------------
* | struct siginfo |
* -----------------------------------------
* | struct ucontext_extended with |
* | unsigned long uc_flags |
* | struct ucontext *uc_link |
* | stack_t uc_stack |
* | _sigregs uc_mcontext with |
* | _s390_regs_common |
* | _s390_fp_regs |
* | sigset_t uc_sigmask |
* | _sigregs_ext uc_mcontext_ext |
* | gprs_high 64 byte (opt) |
* | vxrs_low 128 byte (opt) |
* | vxrs_high 256 byte (opt)|
* | reserved 128 byte (opt) |
* -----------------------------------------
* Future extensions will be added to _sigregs_ext.
*/
struct rt_sigframe
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE];
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
__u16 svc_insn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct siginfo info;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
struct ucontext_extended uc;
};
/* Store registers needed to create the signal frame */
static void store_sigregs(void)
{
save_access_regs(current->thread.acrs);
save_fp_ctl(&current->thread.fp_regs.fpc);
#ifdef CONFIG_64BIT
if (current->thread.vxrs) {
int i;
save_vx_regs(current->thread.vxrs);
for (i = 0; i < __NUM_FPRS; i++)
current->thread.fp_regs.fprs[i] =
*(freg_t *)(current->thread.vxrs + i);
} else
#endif
save_fp_regs(current->thread.fp_regs.fprs);
}
/* Load registers after signal return */
static void load_sigregs(void)
{
restore_access_regs(current->thread.acrs);
/* restore_fp_ctl is done in restore_sigregs */
#ifdef CONFIG_64BIT
if (current->thread.vxrs) {
int i;
for (i = 0; i < __NUM_FPRS; i++)
*(freg_t *)(current->thread.vxrs + i) =
current->thread.fp_regs.fprs[i];
restore_vx_regs(current->thread.vxrs);
} else
#endif
restore_fp_regs(current->thread.fp_regs.fprs);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Returns non-zero on fault. */
static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
[S390] Cleanup in signal handling code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 21:59:39 +08:00
_sigregs user_sregs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Copy a 'clean' PSW mask to the user to avoid leaking
information about whether PER is currently on. */
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
user_sregs.regs.psw.mask = PSW_USER_BITS |
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 15:58:01 +08:00
(regs->psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
[S390] user-copy optimization fallout. Fix new restore_sigregs function. It copies the user space copy of the old psw without correcting the psw.mask and the psw.addr high order bit. While we are at it, simplify save_sigregs a bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-05 02:01:58 +08:00
user_sregs.regs.psw.addr = regs->psw.addr;
memcpy(&user_sregs.regs.gprs, &regs->gprs, sizeof(sregs->regs.gprs));
[S390] Cleanup in signal handling code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 21:59:39 +08:00
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
sizeof(user_sregs.regs.acrs));
[S390] Cleanup in signal handling code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 21:59:39 +08:00
memcpy(&user_sregs.fpregs, &current->thread.fp_regs,
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
sizeof(user_sregs.fpregs));
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs)))
return -EFAULT;
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
[S390] Cleanup in signal handling code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 21:59:39 +08:00
_sigregs user_sregs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Alwys make any pending restarted system call return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
if (__copy_from_user(&user_sregs, sregs, sizeof(user_sregs)))
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
return -EFAULT;
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 15:58:01 +08:00
if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW_MASK_RI))
return -EINVAL;
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
/* Loading the floating-point-control word can fail. Do that first. */
if (restore_fp_ctl(&user_sregs.fpregs.fpc))
return -EINVAL;
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
s390/signal: always restore saved runtime instrumentation psw bit Commit "s390: fix handling of runtime instrumentation psw bit" (5ebf250dab) changed the behavior of setting the runtime instrumentation psw bit. This commit restores the original logic: 1. When returning from the signal handler, the runtime instrumentation psw bit is restored to its saved state. 2. If the runtime instrumentation psw bit is enabled during the signal handler, it is always turned off when leaving the signal handler. The saved state is restored as described in 1. That also implies that turning on runtime instrumentation in the signal handler is only effective while running in the signal context. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
2013-11-19 19:26:09 +08:00
regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 15:58:01 +08:00
(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
/* Check for invalid user address space control. */
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
regs->psw.mask = PSW_ASC_PRIMARY |
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
(regs->psw.mask & ~PSW_MASK_ASC);
[S390] allow all addressing modes The user space program can change its addressing mode between the 24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently the kernel always forces the standard amode on signal delivery and signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for a compat process and 31-bit kernels. Change the signal and ptrace code to allow the full range of addressing modes. Signal handlers are run in the standard addressing mode for the process. One caveat is that even an 31-bit compat process can switch to the 64-bit mode. The next signal will switch back into the 31-bit mode and there is no room in the 31-bit compat signal frame to store the information that the program came from the 64-bit mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:51 +08:00
/* Check for invalid amode */
if (regs->psw.mask & PSW_MASK_EA)
regs->psw.mask |= PSW_MASK_BA;
regs->psw.addr = user_sregs.regs.psw.addr;
[S390] user-copy optimization fallout. Fix new restore_sigregs function. It copies the user space copy of the old psw without correcting the psw.mask and the psw.addr high order bit. While we are at it, simplify save_sigregs a bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-05 02:01:58 +08:00
memcpy(&regs->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs));
[S390] Cleanup in signal handling code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 21:59:39 +08:00
memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
sizeof(current->thread.acrs));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[S390] Cleanup in signal handling code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 21:59:39 +08:00
memcpy(&current->thread.fp_regs, &user_sregs.fpregs,
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
sizeof(current->thread.fp_regs));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Returns non-zero on fault. */
static int save_sigregs_ext(struct pt_regs *regs,
_sigregs_ext __user *sregs_ext)
{
#ifdef CONFIG_64BIT
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Save vector registers to signal stack */
if (current->thread.vxrs) {
for (i = 0; i < __NUM_VXRS_LOW; i++)
vxrs[i] = *((__u64 *)(current->thread.vxrs + i) + 1);
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
sizeof(sregs_ext->vxrs_low)) ||
__copy_to_user(&sregs_ext->vxrs_high,
current->thread.vxrs + __NUM_VXRS_LOW,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
}
#endif
return 0;
}
static int restore_sigregs_ext(struct pt_regs *regs,
_sigregs_ext __user *sregs_ext)
{
#ifdef CONFIG_64BIT
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Restore vector registers from signal stack */
if (current->thread.vxrs) {
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
__copy_from_user(current->thread.vxrs + __NUM_VXRS_LOW,
&sregs_ext->vxrs_high,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
for (i = 0; i < __NUM_VXRS_LOW; i++)
*((__u64 *)(current->thread.vxrs + i) + 1) = vxrs[i];
}
#endif
return 0;
}
[CVE-2009-0029] s390 specific system call wrappers Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 21:14:36 +08:00
SYSCALL_DEFINE0(sigreturn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[S390] System call cleanup. Remove system call glue for sys_clone, sys_fork, sys_vfork, sys_execve, sys_sigreturn, sys_rt_sigreturn and sys_sigaltstack. Call do_execve from kernel_execve directly, move pt_regs to the right place and branch to sysc_return to start the user space program. This removes the last in-kernel system call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27 22:01:40 +08:00
struct pt_regs *regs = task_pt_regs(current);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
struct sigframe __user *frame =
(struct sigframe __user *) regs->gprs[15];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sigset_t set;
if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE))
goto badframe;
[S390] signal: convert to use set_current_blocked() Convert to use set_current_blocked() like x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 22:44:26 +08:00
set_current_blocked(&set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (restore_sigregs(regs, &frame->sregs))
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (restore_sigregs_ext(regs, &frame->sregs_ext))
goto badframe;
load_sigregs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
[CVE-2009-0029] s390 specific system call wrappers Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 21:14:36 +08:00
SYSCALL_DEFINE0(rt_sigreturn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[S390] System call cleanup. Remove system call glue for sys_clone, sys_fork, sys_vfork, sys_execve, sys_sigreturn, sys_rt_sigreturn and sys_sigaltstack. Call do_execve from kernel_execve directly, move pt_regs to the right place and branch to sysc_return to start the user space program. This removes the last in-kernel system call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27 22:01:40 +08:00
struct pt_regs *regs = task_pt_regs(current);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)regs->gprs[15];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sigset_t set;
if (__copy_from_user(&set.sig, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
[S390] signal: convert to use set_current_blocked() Convert to use set_current_blocked() like x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 22:44:26 +08:00
set_current_blocked(&set);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (restore_altstack(&frame->uc.uc_stack))
goto badframe;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (restore_sigregs(regs, &frame->uc.uc_mcontext))
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (restore_sigregs_ext(regs, &frame->uc.uc_mcontext_ext))
[PATCH] s390: rt_sigreturn fix Check return code of do_sigaltstack and force a SIGSEGV if it is -EFAULT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:19:10 +08:00
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
load_sigregs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
/* Default to using normal stack */
sp = regs->gprs[15];
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
/* Overflow on alternate signal stack gives SIGSEGV. */
if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
return (void __user *) -1UL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
}
return (void __user *)((sp - frame_size) & -8ul);
}
static inline int map_signal(int sig)
{
if (current_thread_info()->exec_domain
&& current_thread_info()->exec_domain->signal_invmap
&& sig < 32)
return current_thread_info()->exec_domain->signal_invmap[sig];
else
return sig;
}
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
static int setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs * regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
struct sigframe __user *frame;
struct sigcontext sc;
unsigned long restorer;
size_t frame_size;
/*
* gprs_high are only present for a 31-bit task running on
* a 64-bit kernel (see compat_signal.c) but the space for
* gprs_high need to be allocated if vector registers are
* included in the signal frame on a 31-bit system.
*/
frame_size = sizeof(*frame) - sizeof(frame->sregs_ext);
if (MACHINE_HAS_VX)
frame_size += sizeof(frame->sregs_ext);
frame = get_sigframe(ka, regs, frame_size);
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
if (frame == (void __user *) -1UL)
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Set up backchain. */
if (__put_user(regs->gprs[15], (addr_t __user *) frame))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Create struct sigcontext on the signal stack */
memcpy(&sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE);
sc.sregs = (_sigregs __user __force *) &frame->sregs;
if (__copy_to_user(&frame->sc, &sc, sizeof(frame->sc)))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create _sigregs on the signal stack */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (save_sigregs(regs, &frame->sregs))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
return -EFAULT;
/* Create _sigregs_ext on the signal stack */
if (save_sigregs_ext(regs, &frame->sregs_ext))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long) ka->sa.sa_restorer | PSW_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Signal frame without vector registers are short ! */
__u16 __user *svc = (void *) frame + frame_size - 2;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long) svc | PSW_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* Set up registers for signal handler */
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
regs->gprs[14] = restorer;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->gprs[15] = (unsigned long) frame;
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
/* Force default amode and default user address space control. */
regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
(PSW_USER_BITS & PSW_MASK_ASC) |
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
(regs->psw.mask & ~PSW_MASK_ASC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
regs->gprs[3] = (unsigned long) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP || sig == SIGFPE) {
/* set extra registers only for synchronous signals */
regs->gprs[4] = regs->int_code & 127;
regs->gprs[5] = regs->int_parm_long;
regs->gprs[6] = task_thread_info(current)->last_break;
}
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
struct rt_sigframe __user *frame;
unsigned long uc_flags, restorer;
size_t frame_size;
frame_size = sizeof(struct rt_sigframe) - sizeof(_sigregs_ext);
/*
* gprs_high are only present for a 31-bit task running on
* a 64-bit kernel (see compat_signal.c) but the space for
* gprs_high need to be allocated if vector registers are
* included in the signal frame on a 31-bit system.
*/
uc_flags = 0;
#ifdef CONFIG_64BIT
if (MACHINE_HAS_VX) {
frame_size += sizeof(_sigregs_ext);
if (current->thread.vxrs)
uc_flags |= UC_VXRS;
}
#endif
frame = get_sigframe(&ksig->ka, regs, frame_size);
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
if (frame == (void __user *) -1UL)
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Set up backchain. */
if (__put_user(regs->gprs[15], (addr_t __user *) frame))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long)
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
ksig->ka.sa.sa_restorer | PSW_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
__u16 __user *svc = &frame->svc_insn;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long) svc | PSW_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user(&frame->info, &ksig->info))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create ucontext on the signal stack. */
if (__put_user(uc_flags, &frame->uc.uc_flags) ||
__put_user(NULL, &frame->uc.uc_link) ||
__save_altstack(&frame->uc.uc_stack, regs->gprs[15]) ||
save_sigregs(regs, &frame->uc.uc_mcontext) ||
__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)) ||
save_sigregs_ext(regs, &frame->uc.uc_mcontext_ext))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up registers for signal handler */
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
regs->gprs[14] = restorer;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->gprs[15] = (unsigned long) frame;
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
/* Force default amode and default user address space control. */
regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
(PSW_USER_BITS & PSW_MASK_ASC) |
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
(regs->psw.mask & ~PSW_MASK_ASC);
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
regs->psw.addr = (unsigned long) ksig->ka.sa.sa_handler | PSW_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
regs->gprs[2] = map_signal(ksig->sig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->gprs[3] = (unsigned long) &frame->info;
regs->gprs[4] = (unsigned long) &frame->uc;
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 16:00:05 +08:00
regs->gprs[5] = task_thread_info(current)->last_break;
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
static void handle_signal(struct ksignal *ksig, sigset_t *oldset,
struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
int ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up the stack frame */
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(ksig, oldset, regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
ret = setup_frame(ksig->sig, &ksig->ka, oldset, regs);
signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLE_STEP));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
void do_signal(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
struct ksignal ksig;
new helper: sigmask_to_save() replace boilerplate "should we use ->saved_sigmask or ->blocked?" with calls of obvious inlined helper... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-02 21:59:21 +08:00
sigset_t *oldset = sigmask_to_save();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
/*
* Get signal to deliver. When running under ptrace, at this point
* the debugger may change all our registers, including the system
* call information.
*/
[S390] add TIF_SYSCALL thread flag Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:49 +08:00
current_thread_info()->system_call =
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
test_pt_regs_flag(regs, PIF_SYSCALL) ? regs->int_code : 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (get_signal(&ksig)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Whee! Actually deliver the signal. */
[S390] add TIF_SYSCALL thread flag Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:49 +08:00
if (current_thread_info()->system_call) {
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
regs->int_code = current_thread_info()->system_call;
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
/* Check for system call restarting. */
switch (regs->gprs[2]) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->gprs[2] = -EINTR;
break;
case -ERESTARTSYS:
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (!(ksig.ka.sa.sa_flags & SA_RESTART)) {
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
regs->gprs[2] = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->gprs[2] = regs->orig_gpr2;
[S390] addressing mode limits and psw address wrapping An instruction with an address right below the adress limit for the current addressing mode will wrap. The instruction restart logic in the protection fault handler and the signal code need to follow the wrapping rules to find the correct instruction address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:48 +08:00
regs->psw.addr =
__rewind_psw(regs->psw,
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
regs->int_code >> 16);
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
break;
}
}
[S390] ptrace inferior call interactions with TIF_SYSCALL The TIF_SYSCALL bit needs to be cleared if the debugger changes the state of the ptraced process in regard to the presence of a system call. Otherwise the system call will be restarted although the debugger set up an inferior call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-01 20:32:15 +08:00
/* No longer in a system call */
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
clear_pt_regs_flag(regs, PIF_SYSCALL);
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
pull clearing RESTORE_SIGMASK into block_sigmask() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 11:42:15 +08:00
if (is_compat_task())
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
handle_signal32(&ksig, oldset, regs);
pull clearing RESTORE_SIGMASK into block_sigmask() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 11:42:15 +08:00
else
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
handle_signal(&ksig, oldset, regs);
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
return;
}
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
/* No handlers present - check for system call restart */
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
clear_pt_regs_flag(regs, PIF_SYSCALL);
[S390] add TIF_SYSCALL thread flag Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:49 +08:00
if (current_thread_info()->system_call) {
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
regs->int_code = current_thread_info()->system_call;
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
switch (regs->gprs[2]) {
case -ERESTART_RESTARTBLOCK:
/* Restart with sys_restart_syscall */
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
regs->int_code = __NR_restart_syscall;
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
/* fallthrough */
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
/* Restart system call with magic TIF bit. */
regs->gprs[2] = regs->orig_gpr2;
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
set_pt_regs_flag(regs, PIF_SYSCALL);
s390/ptrace: race of single stepping vs signal delivery The current single step code is racy in regard to concurrent delivery of signals. If a signal is delivered after a PER program check occurred but before the TIF_PER_TRAP bit has been checked in entry[64].S the code clears TIF_PER_TRAP and then calls do_signal. This is wrong, if the instruction completed (or has been suppressed) a SIGTRAP should be delivered to the debugger in any case. Only if the instruction has been nullified the SIGTRAP may not be send. The new logic always sets TIF_PER_TRAP if the program check indicates PER tracing but removes it again for all program checks that are nullifying. The effect is that for each change in the PSW address we now get a single SIGTRAP. Reported-by: Andreas Arnez <arnez@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-21 23:36:27 +08:00
if (test_thread_flag(TIF_SINGLE_STEP))
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
clear_pt_regs_flag(regs, PIF_PER_TRAP);
[S390] add TIF_SYSCALL thread flag Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:49 +08:00
break;
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:47 +08:00
}
}
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
/*
* If there's no signal to deliver, we just put the saved sigmask back.
*/
new helper: restore_saved_sigmask() first fruits of ..._restore_sigmask() helpers: now we can take boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK and restore the blocked mask from ->saved_mask" into a common helper. Open-coded instances switched... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 11:33:55 +08:00
restore_saved_sigmask();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-11 03:33:20 +08:00
void do_notify_resume(struct pt_regs *regs)
{
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
Copy Permalink