renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 14:14:01 +08:00
Code
9f65fb2937
linux-next/arch/powerpc/perf/callchain.c

498 lines
12 KiB
C
Raw Normal View History

perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
/*
* Performance counter callchain support - powerpc architecture code
*
* Copyright © 2009 Paul Mackerras, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 18:02:48 +08:00
#include <linux/perf_event.h>
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
#include <linux/percpu.h>
#include <linux/uaccess.h>
#include <linux/mm.h>
#include <asm/ptrace.h>
#include <asm/pgtable.h>
#include <asm/sigcontext.h>
#include <asm/ucontext.h>
#include <asm/vdso.h>
#ifdef CONFIG_PPC64
powerpc/perf: Move perf core & PMU code into a subdirectory The perf code has grown a lot since it started, and is big enough to warrant its own subdirectory. For reference it's ~60% bigger than the oprofile code. It declutters the kernel directory, makes it simpler to grep for "just perf stuff", and allows us to shorten some filenames. While we're at it, make it more obvious that we have two implementations of the core perf logic. One for (roughly) Book3S CPUs, which was the original implementation, and the other for Freescale embedded CPUs. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-21 01:02:09 +08:00
#include "../kernel/ppc32.h"
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
#endif
powerpc/mm: Rename find_linux_pte_or_hugepte() Add newer helpers to make the function usage simpler. It is always recommended to use find_current_mm_pte() for walking the page table. If we cannot use find_current_mm_pte(), it should be documented why the said usage of __find_linux_pte() is safe against a parallel THP split. For now we have KVM code using __find_linux_pte(). This is because kvm code ends up calling __find_linux_pte() in real mode with MSR_EE=0 but with PACA soft_enabled = 1. We may want to fix that later and make sure we keep the MSR_EE and PACA soft_enabled in sync. When we do that we can switch kvm to use find_linux_pte(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-27 14:24:53 +08:00
#include <asm/pte-walk.h>
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
/*
* Is sp valid as the address of the next kernel stack frame after prev_sp?
* The next frame may be in a different stack area but should not go
* back down in the same stack area.
*/
static int valid_next_sp(unsigned long sp, unsigned long prev_sp)
{
if (sp & 0xf)
return 0; /* must be 16-byte aligned */
if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
return 0;
powerpc/perf: Fix ABIv2 kernel backtraces ABIv2 kernels are failing to backtrace through the kernel. An example: 39.30% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry __GI___libc_read The problem is in valid_next_sp() where we check that the new stack pointer is at least STACK_FRAME_OVERHEAD below the previous one. ABIv1 has a minimum stack frame size of 112 bytes consisting of 48 bytes and 64 bytes of parameter save area. ABIv2 changes that to 32 bytes with no paramter save area. STACK_FRAME_OVERHEAD is in theory the minimum stack frame size, but we over 240 uses of it, some of which assume that it includes space for the parameter area. We need to work through all our stack defines and rationalise them but let's fix perf now by creating STACK_FRAME_MIN_SIZE and using in valid_next_sp(). This fixes the issue: 30.64% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry pagecache_get_page generic_file_read_iter new_sync_read vfs_read sys_read syscall_exit __GI___libc_read Cc: stable@vger.kernel.org # 3.16+ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org>
2014-08-26 10:44:15 +08:00
if (sp >= prev_sp + STACK_FRAME_MIN_SIZE)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
return 1;
/*
* sp could decrease when we jump off an interrupt stack
* back to the regular process stack.
*/
if ((sp & ~(THREAD_SIZE - 1)) != (prev_sp & ~(THREAD_SIZE - 1)))
return 1;
return 0;
}
perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-07-01 05:03:51 +08:00
void
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 23:30:53 +08:00
perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
{
unsigned long sp, next_sp;
unsigned long next_ip;
unsigned long lr;
long level = 0;
unsigned long *fp;
lr = regs->link;
sp = regs->gpr[1];
powerpc/perf: Use perf_instruction_pointer in callchains We use SIAR or regs->nip for the instruction pointer depending on the PMU configuration, but we always use regs->nip in the callchain. Use perf_instruction_pointer so the backtrace is consistent. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-26 09:04:20 +08:00
perf_callchain_store(entry, perf_instruction_pointer(regs));
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
return;
for (;;) {
fp = (unsigned long *) sp;
next_sp = fp[0];
if (next_sp == sp + STACK_INT_FRAME_SIZE &&
fp[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
/*
* This looks like an interrupt frame for an
* interrupt that occurred in the kernel
*/
regs = (struct pt_regs *)(sp + STACK_FRAME_OVERHEAD);
next_ip = regs->nip;
lr = regs->link;
level = 0;
perf core: Add perf_callchain_store_context() helper We need have different helpers to account how many contexts we have in the sample and for real addresses, so do it now as a prep patch, to ease review. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-q964tnyuqrxw5gld18vizs3c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-13 00:01:50 +08:00
perf_callchain_store_context(entry, PERF_CONTEXT_KERNEL);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
} else {
if (level == 0)
next_ip = lr;
else
next_ip = fp[STACK_FRAME_LR_SAVE];
/*
* We can't tell which of the first two addresses
* we get are valid, but we can filter out the
* obviously bogus ones here. We replace them
* with 0 rather than removing them entirely so
* that userspace can tell which is which.
*/
if ((level == 1 && next_ip == lr) ||
(level <= 1 && !kernel_text_address(next_ip)))
next_ip = 0;
++level;
}
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
if (!valid_next_sp(next_sp, sp))
return;
sp = next_sp;
}
}
#ifdef CONFIG_PPC64
/*
* On 64-bit we don't want to invoke hash_page on user addresses from
* interrupt context, so if the access faults, we read the page tables
* to find which page (if any) is mapped and access it directly.
*/
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
static int read_user_stack_slow(void __user *ptr, void *buf, int nb)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
{
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
int ret = -EFAULT;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
pgd_t *pgdir;
pte_t *ptep, pte;
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 03:24:31 +08:00
unsigned shift;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
unsigned long addr = (unsigned long) ptr;
unsigned long offset;
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
unsigned long pfn, flags;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
void *kaddr;
pgdir = current->mm->pgd;
if (!pgdir)
return -EFAULT;
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
local_irq_save(flags);
powerpc/mm: Rename find_linux_pte_or_hugepte() Add newer helpers to make the function usage simpler. It is always recommended to use find_current_mm_pte() for walking the page table. If we cannot use find_current_mm_pte(), it should be documented why the said usage of __find_linux_pte() is safe against a parallel THP split. For now we have KVM code using __find_linux_pte(). This is because kvm code ends up calling __find_linux_pte() in real mode with MSR_EE=0 but with PACA soft_enabled = 1. We may want to fix that later and make sure we keep the MSR_EE and PACA soft_enabled in sync. When we do that we can switch kvm to use find_linux_pte(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-27 14:24:53 +08:00
ptep = find_current_mm_pte(pgdir, addr, NULL, &shift);
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
if (!ptep)
goto err_out;
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 03:24:31 +08:00
if (!shift)
shift = PAGE_SHIFT;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
/* align address to page boundary */
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 03:24:31 +08:00
offset = addr & ((1UL << shift) - 1);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
pte = READ_ONCE(*ptep);
powerpc/mm: Use pte_user() instead of open coding We have a common declaration in pte-common.h Add a book3s specific one and switch to pte_user() in callchain.c. In a subsequent patch we will switch _PAGE_USER to _PAGE_PRIVILEGED in the book3s version only. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-29 21:25:33 +08:00
if (!pte_present(pte) || !pte_user(pte))
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
goto err_out;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
pfn = pte_pfn(pte);
if (!page_is_ram(pfn))
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
goto err_out;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
/* no highmem to worry about here */
kaddr = pfn_to_kaddr(pfn);
powerpc/mm/thp: Make page table walk safe against thp split/collapse We can disable a THP split or a hugepage collapse by disabling irq. We do send IPI to all the cpus in the early part of split/collapse, and disabling local irq ensure we don't make progress with split/collapse. If the THP is getting split we return NULL from find_linux_pte_or_hugepte(). For all the current callers it should be ok. We need to be careful if we want to use returned pte_t pointer outside the irq disabled region. W.r.t to THP split, the pfn remains the same, but then a hugepage collapse will result in a pfn change. There are few steps we can take to avoid a hugepage collapse.One way is to take page reference inside the irq disable region. Other option is to take mmap_sem so that a parallel collapse will not happen. We can also disable collapse by taking pmd_lock. Another method used by kvm subsystem is to check whether we had a mmu_notifer update in between using mmu_notifier_retry(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-30 13:11:03 +08:00
memcpy(buf, kaddr + offset, nb);
ret = 0;
err_out:
local_irq_restore(flags);
return ret;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
}
static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
{
if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) ||
((unsigned long)ptr & 7))
return -EFAULT;
powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-30 18:53:20 +08:00
pagefault_disable();
if (!__get_user_inatomic(*ret, ptr)) {
pagefault_enable();
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
return 0;
powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-30 18:53:20 +08:00
}
pagefault_enable();
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
return read_user_stack_slow(ptr, ret, 8);
}
static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
{
if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
((unsigned long)ptr & 3))
return -EFAULT;
powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-30 18:53:20 +08:00
pagefault_disable();
if (!__get_user_inatomic(*ret, ptr)) {
pagefault_enable();
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
return 0;
powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-30 18:53:20 +08:00
}
pagefault_enable();
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
return read_user_stack_slow(ptr, ret, 4);
}
static inline int valid_user_sp(unsigned long sp, int is_64)
{
if (!sp || (sp & 7) || sp > (is_64 ? TASK_SIZE : 0x100000000UL) - 32)
return 0;
return 1;
}
/*
* 64-bit user processes use the same stack frame for RT and non-RT signals.
*/
struct signal_frame_64 {
char dummy[__SIGNAL_FRAMESIZE];
struct ucontext uc;
unsigned long unused[2];
unsigned int tramp[6];
struct siginfo *pinfo;
void *puc;
struct siginfo info;
char abigap[288];
};
static int is_sigreturn_64_address(unsigned long nip, unsigned long fp)
{
if (nip == fp + offsetof(struct signal_frame_64, tramp))
return 1;
if (vdso64_rt_sigtramp && current->mm->context.vdso_base &&
nip == current->mm->context.vdso_base + vdso64_rt_sigtramp)
return 1;
return 0;
}
/*
* Do some sanity checking on the signal frame pointed to by sp.
* We check the pinfo and puc pointers in the frame.
*/
static int sane_signal_64_frame(unsigned long sp)
{
struct signal_frame_64 __user *sf;
unsigned long pinfo, puc;
sf = (struct signal_frame_64 __user *) sp;
if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) ||
read_user_stack_64((unsigned long __user *) &sf->puc, &puc))
return 0;
return pinfo == (unsigned long) &sf->info &&
puc == (unsigned long) &sf->uc;
}
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 23:30:53 +08:00
static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-07-01 05:03:51 +08:00
struct pt_regs *regs)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
{
unsigned long sp, next_sp;
unsigned long next_ip;
unsigned long lr;
long level = 0;
struct signal_frame_64 __user *sigframe;
unsigned long __user *fp, *uregs;
powerpc/perf: Use perf_instruction_pointer in callchains We use SIAR or regs->nip for the instruction pointer depending on the PMU configuration, but we always use regs->nip in the callchain. Use perf_instruction_pointer so the backtrace is consistent. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-26 09:04:20 +08:00
next_ip = perf_instruction_pointer(regs);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
lr = regs->link;
sp = regs->gpr[1];
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
perf core: Add a 'nr' field to perf_event_callchain_context We will use it to count how many addresses are in the entry->ip[] array, excluding PERF_CONTEXT_{KERNEL,USER,etc} entries, so that we can really return the number of entries specified by the user via the relevant sysctl, kernel.perf_event_max_contexts, or via the per event perf_event_attr.sample_max_stack knob. This way we keep the perf_sample->ip_callchain->nr meaning, that is the number of entries, be it real addresses or PERF_CONTEXT_ entries, while honouring the max_stack knobs, i.e. the end result will be max_stack entries if we have at least that many entries in a given stack trace. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-s8teto51tdqvlfhefndtat9r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11 05:08:32 +08:00
while (entry->nr < entry->max_stack) {
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
fp = (unsigned long __user *) sp;
if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp))
return;
if (level > 0 && read_user_stack_64(&fp[2], &next_ip))
return;
/*
* Note: the next_sp - sp >= signal frame size check
* is true when next_sp < sp, which can happen when
* transitioning from an alternate signal stack to the
* normal stack.
*/
if (next_sp - sp >= sizeof(struct signal_frame_64) &&
(is_sigreturn_64_address(next_ip, sp) ||
(level <= 1 && is_sigreturn_64_address(lr, sp))) &&
sane_signal_64_frame(sp)) {
/*
* This looks like an signal frame
*/
sigframe = (struct signal_frame_64 __user *) sp;
uregs = sigframe->uc.uc_mcontext.gp_regs;
if (read_user_stack_64(&uregs[PT_NIP], &next_ip) ||
read_user_stack_64(&uregs[PT_LNK], &lr) ||
read_user_stack_64(&uregs[PT_R1], &sp))
return;
level = 0;
perf core: Add perf_callchain_store_context() helper We need have different helpers to account how many contexts we have in the sample and for real addresses, so do it now as a prep patch, to ease review. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-q964tnyuqrxw5gld18vizs3c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-13 00:01:50 +08:00
perf_callchain_store_context(entry, PERF_CONTEXT_USER);
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
continue;
}
if (level == 0)
next_ip = lr;
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
++level;
sp = next_sp;
}
}
static inline int current_is_64bit(void)
{
/*
* We can't use test_thread_flag() here because we may be on an
* interrupt stack, and the thread flags don't get copied over
* from the thread_info on the main stack to the interrupt stack.
*/
return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT);
}
#else /* CONFIG_PPC64 */
/*
* On 32-bit we just access the address and let hash_page create a
* HPTE if necessary, so there is no need to fall back to reading
* the page tables. Since this is called at interrupt level,
* do_page_fault() won't treat a DSI as a page fault.
*/
static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
{
powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-30 18:53:20 +08:00
int rc;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
((unsigned long)ptr & 3))
return -EFAULT;
powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-30 18:53:20 +08:00
pagefault_disable();
rc = __get_user_inatomic(*ret, ptr);
pagefault_enable();
return rc;
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
}
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 23:30:53 +08:00
static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-07-01 05:03:51 +08:00
struct pt_regs *regs)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
{
}
static inline int current_is_64bit(void)
{
return 0;
}
static inline int valid_user_sp(unsigned long sp, int is_64)
{
if (!sp || (sp & 7) || sp > TASK_SIZE - 32)
return 0;
return 1;
}
#define __SIGNAL_FRAMESIZE32 __SIGNAL_FRAMESIZE
#define sigcontext32 sigcontext
#define mcontext32 mcontext
#define ucontext32 ucontext
#define compat_siginfo_t struct siginfo
#endif /* CONFIG_PPC64 */
/*
* Layout for non-RT signal frames
*/
struct signal_frame_32 {
char dummy[__SIGNAL_FRAMESIZE32];
struct sigcontext32 sctx;
struct mcontext32 mctx;
int abigap[56];
};
/*
* Layout for RT signal frames
*/
struct rt_signal_frame_32 {
char dummy[__SIGNAL_FRAMESIZE32 + 16];
compat_siginfo_t info;
struct ucontext32 uc;
int abigap[56];
};
static int is_sigreturn_32_address(unsigned int nip, unsigned int fp)
{
if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad))
return 1;
if (vdso32_sigtramp && current->mm->context.vdso_base &&
nip == current->mm->context.vdso_base + vdso32_sigtramp)
return 1;
return 0;
}
static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp)
{
if (nip == fp + offsetof(struct rt_signal_frame_32,
uc.uc_mcontext.mc_pad))
return 1;
if (vdso32_rt_sigtramp && current->mm->context.vdso_base &&
nip == current->mm->context.vdso_base + vdso32_rt_sigtramp)
return 1;
return 0;
}
static int sane_signal_32_frame(unsigned int sp)
{
struct signal_frame_32 __user *sf;
unsigned int regs;
sf = (struct signal_frame_32 __user *) (unsigned long) sp;
if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, &regs))
return 0;
return regs == (unsigned long) &sf->mctx;
}
static int sane_rt_signal_32_frame(unsigned int sp)
{
struct rt_signal_frame_32 __user *sf;
unsigned int regs;
sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, &regs))
return 0;
return regs == (unsigned long) &sf->uc.uc_mcontext;
}
static unsigned int __user *signal_frame_32_regs(unsigned int sp,
unsigned int next_sp, unsigned int next_ip)
{
struct mcontext32 __user *mctx = NULL;
struct signal_frame_32 __user *sf;
struct rt_signal_frame_32 __user *rt_sf;
/*
* Note: the next_sp - sp >= signal frame size check
* is true when next_sp < sp, for example, when
* transitioning from an alternate signal stack to the
* normal stack.
*/
if (next_sp - sp >= sizeof(struct signal_frame_32) &&
is_sigreturn_32_address(next_ip, sp) &&
sane_signal_32_frame(sp)) {
sf = (struct signal_frame_32 __user *) (unsigned long) sp;
mctx = &sf->mctx;
}
if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) &&
is_rt_sigreturn_32_address(next_ip, sp) &&
sane_rt_signal_32_frame(sp)) {
rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
mctx = &rt_sf->uc.uc_mcontext;
}
if (!mctx)
return NULL;
return mctx->mc_gregs;
}
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 23:30:53 +08:00
static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-07-01 05:03:51 +08:00
struct pt_regs *regs)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
{
unsigned int sp, next_sp;
unsigned int next_ip;
unsigned int lr;
long level = 0;
unsigned int __user *fp, *uregs;
powerpc/perf: Use perf_instruction_pointer in callchains We use SIAR or regs->nip for the instruction pointer depending on the PMU configuration, but we always use regs->nip in the callchain. Use perf_instruction_pointer so the backtrace is consistent. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-26 09:04:20 +08:00
next_ip = perf_instruction_pointer(regs);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
lr = regs->link;
sp = regs->gpr[1];
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
perf core: Add a 'nr' field to perf_event_callchain_context We will use it to count how many addresses are in the entry->ip[] array, excluding PERF_CONTEXT_{KERNEL,USER,etc} entries, so that we can really return the number of entries specified by the user via the relevant sysctl, kernel.perf_event_max_contexts, or via the per event perf_event_attr.sample_max_stack knob. This way we keep the perf_sample->ip_callchain->nr meaning, that is the number of entries, be it real addresses or PERF_CONTEXT_ entries, while honouring the max_stack knobs, i.e. the end result will be max_stack entries if we have at least that many entries in a given stack trace. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-s8teto51tdqvlfhefndtat9r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11 05:08:32 +08:00
while (entry->nr < entry->max_stack) {
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
fp = (unsigned int __user *) (unsigned long) sp;
if (!valid_user_sp(sp, 0) || read_user_stack_32(fp, &next_sp))
return;
if (level > 0 && read_user_stack_32(&fp[1], &next_ip))
return;
uregs = signal_frame_32_regs(sp, next_sp, next_ip);
if (!uregs && level <= 1)
uregs = signal_frame_32_regs(sp, next_sp, lr);
if (uregs) {
/*
* This looks like an signal frame, so restart
* the stack trace with the values in it.
*/
if (read_user_stack_32(&uregs[PT_NIP], &next_ip) ||
read_user_stack_32(&uregs[PT_LNK], &lr) ||
read_user_stack_32(&uregs[PT_R1], &sp))
return;
level = 0;
perf core: Add perf_callchain_store_context() helper We need have different helpers to account how many contexts we have in the sample and for real addresses, so do it now as a prep patch, to ease review. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-q964tnyuqrxw5gld18vizs3c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-13 00:01:50 +08:00
perf_callchain_store_context(entry, PERF_CONTEXT_USER);
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
continue;
}
if (level == 0)
next_ip = lr;
perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-06-30 01:34:05 +08:00
perf_callchain_store(entry, next_ip);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
++level;
sp = next_sp;
}
}
perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-07-01 05:03:51 +08:00
void
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 23:30:53 +08:00
perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
{
perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Borislav Petkov <bp@amd64.org>
2010-07-01 05:03:51 +08:00
if (current_is_64bit())
perf_callchain_user_64(entry, regs);
else
perf_callchain_user_32(entry, regs);
perf_counter: powerpc: Add callchain support This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18 06:25:32 +08:00
}
Copy Permalink